TARIFF-18: price_taxes_eur_kwh stops shipping at half the real figure

`price_taxes_eur_kwh` shipped at 0.06 EUR/kWh with no recorded provenance - no card, no date, no component list - and roughly HALF the true Flemish all-in non-energy figure. It now ships at 0.11736, and the rows it is made of are in the code rather than in this message: Fluvius distribution (Antwerpen) 5,35 c EUR/kWh Bijzondere accijns, "Alle verbruik" 4,876 Bijdrage groene stroom en WKK Vlaanderen 1,51 Energiebijdrage (0 EUR/MWh since 2026-08-01) 0 ------ 11,736 c EUR/kWh = 0.11736 Eneco residential card for Flanders, September 2026, incl. 6 % VAT. `app/price.py`'s FLEMISH_TAXES_COMPONENTS_EUR_KWH carries the rows and test_price.py section 1b re-adds them - and also compares the total against the card's own figures typed in the test file, so an edit that moved the rows and the default together is still caught. WHAT THIS IS NOT. It is not an arbitrage-correctness fix and it cannot be. This scalar is a LEVEL component: an additive constant cancels exactly in `max - min` and leaves the argmin where it was. TARIFF-17 shipped that proof and it is unchanged - test_price.py 16b drives six flat scalars spanning and exceeding the whole per-DSO range and gets the identical cheapest hour and the identical spread to the last digit. DOCS and the CHANGELOG say so in those words. WHAT IT IS. A display and guard fix: * every number an operator reads, which at half the true value made the add-on look considerably better than it is; and * §17's negative-price guard in arbitrage.py - the one rung that tests an ABSOLUTE all-in price rather than a difference. It fires when `spot < -(markup + taxes)`, so its boundary moves -0.09 -> -0.14736 EUR/kWh of spot. test_arbitrage.py section 2c drives both sides through the shipped decide() and pins the boundary from below as well. The default is Antwerpen's real row, near the LOW end of the 0.117-0.131 per-DSO band, and that is deliberate: the error directions are not symmetric. Too high carries a genuinely negative hour above zero and the add-on exports into paid-for disposal - §17's own case. Too low only declines a discharge that would have paid. TARIFF-17's INTERACTION, WHICH HAD TO BE DECIDED. Nothing in that rung hardcoded 0.06; it read PRICE_OPTION_DEFAULTS, so moving the default moves what it refuses. The Supervisor sets `App.options = deepmerge(config.yaml defaults, stored options)`, so a saved blob carries the key whether it was typed or not - every stored 0.06 became "non-default" with nobody editing anything, and a working Walloon or Brussels site with a taxes table would have met SystemExit(78) on the upgrade over an inert number. price.py now carries SUPERSEDED_TAXES_DEFAULTS_EUR_KWH = (0.06,) and validate.py reads a superseded default as untouched too. The rung is NOT weakened: 0.1198 beside a table is still refused by name, and the refusal now names both figures. config.yaml and PRICE_OPTION_DEFAULTS moved together; CFG-03's tripwire (test_price.py section 1, test_defaults_pin.py) stayed green by agreeing. test_price.py section 0's fourth check was REWRITTEN rather than re-pointed: it used to justify the file's own grading constants by observing that the shipped pair was degenerate (0.06 is exactly twice 0.03). TARIFF-18 ends that coincidence, so the sentence is no longer true and is not kept. 29/29 test files green. Mutation ledger on the PR. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01BwRLw7eKYj2byVdwB6kbjU
Merge pull request 'TARIFF-17: a charge that varies by hour gets somewhere to live' (#85 ) from TARIFF-17 into release/1.0
2026-09-13 16:24:56 +02:00 · 2026-09-13 15:40:17 +02:00 · 2026-09-13 15:31:15 +02:00 · 2026-09-13 14:07:07 +02:00 · 2026-09-13 13:51:35 +02:00 · 2026-09-13 13:51:05 +02:00
22 changed files with 4067 additions and 139 deletions
@@ -22,6 +22,10 @@ if it has, it needs 0.10.0. Whoever deploys decides.
 | _this branch_ | TARIFF-14 - the price a trade is decided against is the price of the interval being traded |
 | _this branch_ | TARIFF-07 - three plugins that never fetched a price are withdrawn, and a site configured on one is told so **⚠️ BACKWARD-INCOMPATIBLE** |
 | _this branch_ | TARIFF-15 - `custom_formula`: your own tariff card's two coefficients, graded against the card's own printed price |
+| _this branch_ | TARIFF-13 - the capacity-tariff row's "quarter(s) banked" stops resetting to 0 at every restart, and a tied peak's quarter stops moving |
+| _this branch_ | TARIFF-11 - the add-on's account of the tariff plan stops flattering it, and the status page is graded as a surface |
+| _this branch_ | TARIFF-17 - a price component that varies by hour has somewhere to live, so a Walloon day/night network tariff can change which hour is cheapest |
+| _this branch_ | TARIFF-18 - `price_taxes_eur_kwh` stops shipping at half the real Flemish figure **⚠️ CHANGED DEFAULT** |

 ⚠️ **A CONFIG THAT STARTS ON THE CURRENT VERSION CAN BE REFUSED ON THE NEXT
 ONE.** TARIFF-07 withdraws `engie_dynamic`, `totalenergies_dynamic` and
@@ -57,6 +61,321 @@ separate card. *(Annotated 2026-09-13: that card is **TARIFF-15**, below, and it
 shipped on this branch as `custom_formula`. It is still not an alias — the
 operator types their own coefficients; nothing is invented on their behalf.)*

+### TARIFF-17 - a price component that varies by hour has somewhere to live
+
+**`price_taxes_profile`: the taxes component as a period table, alongside the
+flat `price_taxes_eur_kwh`.** ⚠️ **The flat scalar was not a wrong number, and
+this is not a correction of one.** The optimiser reads exactly two things off a
+series — the spread `max − min` over the firm points, and which hour is
+cheapest — and an additive constant identical in every hour cancels out of the
+first and leaves the second where it was. It is *provably* inert. What was
+missing was anywhere for an **hour-varying** non-energy component to live.
+
+Belgium has one. Fluvius distribution is a single rate, and its row on the
+tariff card reads `Normaal | Uitsl. nacht` — *exclusive night* being a separate
+physical circuit, not a night register — so for the reference site in Flanders
+nothing here changes. The Walloon DSOs and Sibelga are on the same card with
+four columns, `Enkelvoudig | Dag | Nacht | Uitsl. nacht`, and the gap is real
+money (c€/kWh): ORES `13,27 / 7,39`, AIESH `15,17 / 8,21`, Tecteo RESA
+`12,20 / 7,01`, Sibelga `9,39 / 7,10`, ORES IMPACT 2026 `16,578 / 5,090`.
+
+⚠️ **AND THE BANDS ARE ANTI-CORRELATED WITH WHAT THE BATTERY WANTS TO DO.** The
+cheap network hours *are* the cheap spot hours, so flattening them does not
+shift the curve — it **understates the spread** and declines cycles that would
+have paid. Measured on one ordinary Belgian winter weekday, same feed, same
+markup, the only difference being the taxes argument:
+
+```
+flat 0.0000 / 0.0739 / 0.1198 / 0.1327 / 1.0000  -> cheapest hour 13, spread 0.1500
+ORES dag 0.1327 / nacht 0.0739                   -> cheapest hour 03, spread 0.1788
+```
+
+Five different flat figures spanning and exceeding the table's own range give
+**the same hour and the same spread to the last digit**; the table moves the
+hour a battery would buy in from 13:00 to 03:00. That is the regression
+`test_price.py` section 16 grades, and it grades **the hour**, not the spread:
+an implementation that reads the table once and adds one number to every point
+produces the right magnitude and the wrong shape, and a spread assertion passes
+on it. `DOCS.md` now names the three buckets — LEVEL, SPREAD, ORDER — so the
+next person adding a component knows which one it is in.
+
+**The change is contained.** `static_tariff.py` already shipped the grammar —
+periods tiling the day, gaps and overlaps refused, day types, DST — so it is
+**the same parser**, taking the option name and the "what this number means"
+clause as arguments. There is no second tiling rule, because a second one would
+be a second set of 23- and 25-hour-day bugs; `test_static_tariff.py` section 10
+pins that by parsing every module under `app/` and asserting the grammar is
+defined in exactly one of them, and by deriving each of thirteen refusal
+sentences for the new option from the old option's own sentence.
+`Component.TAXES` semantics, `code_leaks()` and the double-counting guarantee
+are untouched: the new key joins `FRAMEWORK_KEYS`, `BANNED_IN_PLUGIN_CODE` is
+derived from that set, and a plugin naming it is refused at `register()`.
+
+⚠️ **A MALFORMED TABLE IS REFUSED AT STARTUP, NOT AT THE NEXT FETCH.** It is
+read on the ~30 s planning path through `assemble()`, and a table that first
+fails at 03:00 is a site that stops pricing at 03:00 — which §11.4 turns into a
+quiet fallback indistinguishable from a healthy fixed-tariff day. `validate.py`
+parses it at startup, and refuses three things: a table that does not tile the
+day (the same sentence `static_profile` gives, naming this key); a table set
+*beside* a non-default `price_taxes_eur_kwh`, because the table wins and the
+scalar would then be a number the operator typed that decides nothing; and a
+whole card typed **in cents**, which is how these figures are printed. That
+last rung is not a restatement of the parser's ±10 EUR/kWh bound — ORES's
+`13,27` trips the parser, but Sibelga's entire card, `9,39` and `7,10`, is
+under it, and would otherwise have started as a 9.39 EUR/kWh levy.
+
+**Nothing changes for a site that does not set it.** The option ships `""`, the
+scalar path is unchanged arithmetically — `test_price.py` 16f reproduces the
+pre-TARIFF-17 expression and compares 12 capability/scalar combinations point
+for point with `==` — and the reference site is in Flanders, where the flat
+figure is correct. This is a product concern rather than a site one: the add-on
+is sold to clients, and a Walloon or Brussels client could not express their
+own tariff.
+
+### TARIFF-18 - `price_taxes_eur_kwh` stops shipping at half the real figure
+
+⚠️ **A SHIPPED DEFAULT CHANGED: `price_taxes_eur_kwh` 0.06 -> 0.11736 EUR/kWh.**
+Same shape as 0.8.0's `slew_w` rule, and the same instruction follows — **read
+the live options before `ha addons update`**, this time to see whether
+`price_taxes_profile` is set, which is the one shape the move could have
+refused. The "who is affected" section below is the part that matters, and it
+is shorter on consequences than a changed default usually is.
+
+The old `0.06` had **no recorded provenance anywhere**: not a card, not a date,
+not a component list. It is roughly **half** the Flemish figure. The new default
+is the Eneco residential card for Flanders, September 2026, incl. 6 % VAT, and
+its rows are now **in the code** (`app/price.py`'s
+`FLEMISH_TAXES_COMPONENTS_EUR_KWH`, re-added by `test_price.py` section 1b):
+
+| component | c€/kWh |
+|---|---|
+| Fluvius distribution (**Antwerpen**) | 5,35 |
+| Bijzondere accijns, *"Alle verbruik"* — no volume bands | 4,876 |
+| Bijdrage groene stroom en WKK Vlaanderen | 1,51 |
+| Energiebijdrage — **0 EUR/MWh since 2026-08-01**, merged into the accijns | 0 |
+| **total** | **11,736 c€/kWh = 0.11736** |
+
+⚠️ **IT IS PER-DSO, AND THE DEFAULT IS NOT AN AVERAGE.** Only the distribution
+row moves: across the eight Fluvius DSOs it runs 5,28 c€/kWh
+(Midden-Vlaanderen) to 6,70 (West), so the Flemish total runs about **0.117 to
+0.131**. The default is a real DSO's real row, near the **low** end, and DOCS
+tells an operator to look up their own. A **Walloon or Brussels** site should
+not use this scalar at all — its distribution tariff has a day and a night band
+and belongs in TARIFF-17's `price_taxes_profile`.
+
+⚠️ **THIS IS A DISPLAY AND GUARD FIX. IT DOES NOT IMPROVE ARBITRAGE AND CANNOT.**
+This scalar is a **LEVEL** component: an additive constant cancels exactly in
+`max − min` and leaves the argmin where it was. TARIFF-17 shipped the machinery
+and the proof — six flat scalars spanning and exceeding the whole per-DSO range
+give the **identical** cheapest hour and the **identical** spread to the last
+digit (`test_price.py` 16b, printed on every run), and none of that changes
+here. No trade happens that did not happen before *because of the level*. What
+does change is two things, and nothing else:
+
+* **every number an operator reads** — the all-in prices on the status page,
+  `custom_formula`'s startup preview and the recorded price history. At half
+  the true non-energy component they made the add-on look considerably better
+  than it is; and
+* **§17's negative-price guard** (`arbitrage.py`), the one rung that tests an
+  **absolute** all-in price rather than a difference. It fires when
+  `spot < −(markup + taxes)`, so its boundary moves **−0.09000 -> −0.14736
+  EUR/kWh of spot**. A −0.11868 EUR/kWh spot hour used to read **−0.02868**
+  all-in and the discharge was refused as paid-for disposal; at the real tax
+  level it reads **+0.02868** and discharges, because that hour genuinely
+  paid.
+  `test_arbitrage.py` section 2c drives both sides through the shipped
+  `decide()`, and pins the boundary from below as well.
+
+⚠️ **AND THAT ASYMMETRY IS WHY THE DEFAULT SITS AT THE BOTTOM OF THE BAND.** Set
+too **high**, the figure carries a genuinely negative hour above zero and the
+add-on exports into paid-for disposal — §17's own case. Set too **low**, it only
+declines a discharge that would have paid. One default standing in for eight
+DSOs belongs at the bottom.
+
+#### Who is affected
+
+* **A site that set `price_taxes_eur_kwh` itself: nothing changes.** Its value
+  is kept and is never silently replaced.
+* **A site whose stored options blob already carries the key: nothing changes
+  either, and this is most existing installs.** The Supervisor sets
+  `App.options = deepmerge(config.yaml defaults, stored options)`
+  (`tools/supervisor_selfapi_probe.py` §D), so a moved default reaches only
+  keys the blob does **not** carry — and the reference install's export carries
+  **70 of the 71**, the one absentee being a key added after its last save.
+  Such a site goes on running at `0.06` and reading numbers that are about half
+  its real all-in price until somebody opens the Configuration tab. ⚠️ **That
+  is a real limit of this card and it is not fixed here**: the change reaches a
+  **fresh install**, and an existing one only when its options are re-saved.
+  ⚠️ **NOT re-measured on this branch** — the 70-of-71 figure is 0.9.0's, and
+  PKG-09's `tools/predeploy_check.py --options <live blob>` against the live
+  options is what would confirm it before deploying.
+* ⚠️ **A site with `price_taxes_profile` SET would have been refused at startup,
+  and is deliberately not.** TARIFF-17 made a taxes period table beside a
+  **non-default** `price_taxes_eur_kwh` a `SystemExit(78)` refusal, comparing
+  against the shipped default precisely because the Supervisor writes the key
+  whether it was typed or not. Moving the default turns every stored `0.06`
+  into "non-default" **without anybody editing anything**, so a working Walloon
+  or Brussels site would have stopped starting on the upgrade over an inert
+  number the table overrides anyway. `price.py` now carries
+  `SUPERSEDED_TAXES_DEFAULTS_EUR_KWH = (0.06,)` and `validate.py` treats a
+  superseded default as *untouched* as well. **The rung is not weakened**: a
+  figure that is neither the shipped nor a superseded default — ORES's 0.1198,
+  say — is still refused, by name, and the refusal now says which of the two
+  figures it will accept (`test_validate.py`, four new checks plus the
+  difference precondition).
+
+Nothing hardcoded `0.06` in that rung — it read `PRICE_OPTION_DEFAULTS` — which
+is why the interaction is a *behaviour* change rather than a drift, and why it
+had to be decided rather than noticed.
+
+`config.yaml` and `PRICE_OPTION_DEFAULTS` moved together and CFG-03's tripwire
+(`test_price.py` section 1, `test_defaults_pin.py`) stayed green by agreeing,
+not by being widened. ⚠️ One check did have to be **rewritten rather than
+re-pointed**: `test_price.py` section 0 used to justify its own grading
+constants by observing that the shipped pair was degenerate — `0.06` is exactly
+twice `0.03`. TARIFF-18 ends that coincidence, so the sentence is no longer true
+and is not kept; the file now asserts per-figure that neither shipped default is
+what it grades with, which is the property that was actually load-bearing.
+
+### TARIFF-13 - the coverage figure beside the peak, and which quarter gets it
+
+**The capacity-tariff status row's `N quarter(s) banked` is read from the
+database instead of from process memory.** It was an `int` on `PeakTracker`,
+starting at 0 and counted up inside `sync()`, printed next to a peak read from
+SQLite. A 40-hour soak caught what that means at a restart, on both instances:
+
+```
+before: 2026-09: peak 365 W, set by the quarter at 2026-09-11T18:45:00+00:00
+        - 10 % of the 3500 W soft limit; 120 quarter(s) banked
+after : 2026-09: peak 365 W, set by the quarter at 2026-09-11T18:45:00+00:00
+        - 10 % of the 3500 W soft limit;   0 quarter(s) banked
+```
+
+The peak is durable and was never wrong. The **count** is what says how much of
+the billing month that peak covers, and 365 W over 120 quarters and 365 W over
+0 quarters are different claims about the same number — so mid-month, after
+every restart, the page made the weaker claim while showing the stronger one's
+value. TARIFF-01's rule that an unreadable store must not read as a zero peak,
+one column over. Two more defects in the same variable, neither in the ticket:
+it was **never scoped to a month** (on 1 October the row still showed
+September's tally beside October's empty month), and it **missed the block
+`restore()` banks** from the checkpoint at startup.
+
+⚠️ **AN UNREADABLE STORE NOW SAYS SO IN THAT CLAUSE.** Where the database will
+not answer a count, the row reads `an unreadable number of quarter(s) banked`.
+`0` was never available; `None` was rejected too, because `None quarter(s)
+banked` reads as the same zero. `0 quarter(s) banked` stays true and reachable —
+it is what a month nothing has been written to says.
+
+⚠️ **AND A TIED PEAK'S ATTRIBUTED QUARTER IS NOW DECIDED: the EARLIEST wins.**
+The wattage is what the utility bills, so this changes no bill and no guard —
+`peak_w` is still only ever raised and SAFETY-07 reads the same watts. What it
+changes is the answer to "when did my monthly peak happen", which an operator
+goes and investigates; it now stops moving. The two readers of that record
+**did** disagree: the `monthly_peak` upsert's strict `>` kept whichever tied
+block was *written* first, while `recompute_month()` has always kept the
+earliest — the same by accident only while blocks arrive in time order, and
+measured to diverge (09:45 against 09:00) when they do not.
+
+⚠️ **THE SOAK'S DRIFTING QUARTER WAS NOT A TIE, AND IS LEFT ALONE.** Driven,
+exactly equal quarters never re-attributed at all. What moved the timestamp was
+a genuine new maximum **below the row's whole-watt resolution** — 365.0000001 W
+is a new peak to the database and the same `365 W` to the reader. That is the
+instrument being right, and printing more decimals to explain it would put
+noise in the one row an operator reads when the guard engages.
+
+Reasoning in `DECISIONS/TARIFF-13-the-coverage-of-a-peak.md`; parts 11 and 12
+of `test_tariff.py` drive a real restart — a second `Controller` against the
+same file — and pin both decisions.
+### TARIFF-11 - the plan's own account of itself, corrected and put on the page
+
+**Four defects, one shape: every one of them made the add-on look better than
+it was.** They shipped together because nothing in this repository graded the
+strings a human is shown — every tariff check inspects the `TariffPlan`
+*object*, and all four were in the *sentences* built out of it.
+
+**1. `TariffPlan.words` counted points and called them hours.** The live
+add-on logged `dynamic_dayahead from generic_dayahead, 132 h` for **132
+quarter-hourly points = 33 hours**. Belgium moved to a 15-minute MTU on
+2025-10-01, so on the real feed this was wrong every time it was printed, and
+⚠️ **not by a constant factor**: measured across a 40-hour soak the
+overstatement ranged **1.79× to 5.33×**, because §8.3's carried points are
+hourly while the firm ones are quarter-hourly and the ratio moves with the mix
+through the day. It now reads
+
+```
+dynamic_dayahead from generic_dayahead, 132 points over 33 h,
+132 firm / 0 carried, 900 s spacing
+```
+
+— the same plan, with each number in its own unit. On the weekday morning that
+plan is partly carried and reads `60 points over 33 h, 36 firm / 24 carried,
+900+3600 s spacing, provisional` instead, which is the state the soak found an
+operator could learn nothing about. The `N points over H h` wording is
+FCST-04's *Price history* wording on purpose, so the two rows describing the
+same feed can be compared rather than being two conventions on one page.
+
+**2. The §8.3 and flat-tariff refusals did the same, and they reach an
+operator.** `§8.3: only 1 of 96 hours carry a published price` is 96 points,
+which is 24 hours; the flat rung counted the same points and called them `firm
+hours`. ⚠️ **This is exactly the point≠hour conflation TARIFF-14 removed from
+`at()`, left standing in the prose that describes it** — and it is not confined
+to a log line, because `self.arb.explain()` puts it on the status page. Both
+now print the two quantities separately: `only 1 of 96 points carry a published
+price - 1 of 24 hours`. The same conflation in `price_forecast.py`'s §8.3
+carry-forward log line — `%d of %d hours` with a carried-HOUR count over a
+POINT count — is corrected in the same commit.
+
+**3. The plan reached no HTTP surface at all.** `origin`, `product`, the
+firm/carried split and the spacing appeared in **no** status row. `rows["Tariff"]`
+was `static_status()`'s sentence, computed on the 30 s I/O-free tick from its
+own static plan, and it **never saw the provider plan** — it read `'no static
+profile'` at all **802** soak samples on a site whose feed was answering. So an
+operator could not tell a working dynamic tariff from no tariff machinery at
+all, and could not learn that the plan was `provisional` for 76 % of the soak
+or mixed 900/3600 s for 70 %. The *Tariff* row now carries the plan.
+
+⚠️ **The two halves of that row are not computed at the same moment and the row
+says so.** `static_status()` runs on the 30 s tick; the provider plan comes off
+the 1800 s background refresh and is served for up to `TARIFF_MAX_AGE_S`
+(5400 s since TARIFF-12). So the plan half is stamped with **its own age**,
+measured from `tariff_at` — which TARIFF-12 deliberately does not move on a
+kept plan. A provider site with no usable plan says that too, rather than
+falling silently back to the static sentence.
+
+**4. `main.py`'s "if and only if" was false, and the row named an option that
+was on.** TARIFF-10's comment asserted that `self.arb is None` **iff**
+`arbitrage.enabled(self.o)` was False. `cycle()` returns at the input hold —
+inputs missing, `bad_for < stale_input_s`, 15 s by default — **before** it
+reaches `self.arb = None`. Driven: `arbitrage_enabled: true` plus a sensor
+answering `None` gives `arbitrage.enabled(opts) = True`, `self.arb = None` and
+a row reading `off (arbitrage_enabled)`. Past the first completed cycle the
+same early return leaves the **previous** decision standing, which the row
+rendered as a current one, up to ~15 s stale. The row now distinguishes three
+facts with three remedies — trading is off; trading is on and this cycle
+reached no decision; a decision, with its age — and it reads the **option**
+rather than inferring it from a missing decision. The comment states what is
+true.
+
+⚠️ **THE DELIVERABLE IS THE CHECK, NOT THE FIXES.** All four survived 29 green
+suites because no check in this repository had ever read a rendered row.
+`test_price.py` section 12 renders through the shipped `Controller.status_payload()`,
+parses each number out of the row **by its own slot**, and compares it against
+a figure computed from the fixture's own construction parameters — never from
+the property the row was built out of (MUTATION.md habit 4). It is deliberately
+**not** a substring test over a sentence the same file wrote: `"132 points" in
+row` is satisfied by the number appearing in the *other* number's slot, which
+habit 14 shows is a zero-byte edit away. The fixtures are a **set** of four
+plan shapes, and the check computes and prints the table of field pairs no
+fixture separates — `none` — so a pair that became degenerate would go red
+rather than quietly vacuous. The *Arbitrage* row's three states are driven
+through real cycles with a sensor answering `None`, and graded by
+**inequality**: two facts that must not render identically.
+
+**Nothing about what the battery decides changes.** No threshold, no refusal
+rung, no claim, no setpoint. Every edit is to a sentence, to a derived counter
+behind one, or to where a sentence is rendered.
+
 ### TARIFF-15 - your own tariff card, as two coefficients

 **New price provider `custom_formula`, and one new option, `price_formula`.**
@@ -0,0 +1,225 @@
+# TARIFF-13 — the coverage of a peak, and which quarter gets the credit
+
+Two decisions. §1 is the defect the ticket was raised on; §2 is the smaller
+question it asked to be settled deliberately rather than left as an accident.
+§3 is what this branch deliberately did **not** do, and why.
+
+---
+
+## 0. What was actually wrong, stated once
+
+`main.py`'s capacity-tariff status row prints a peak read from SQLite and a
+coverage figure read from **process memory**:
+
+```python
+_pk = self.peak.peak(when)                      # SQLite, durable
+...
+ f"; {self.peak.recorded} quarter(s) banked"   # an int on the tracker
+```
+
+`PeakTracker.recorded` was `self.recorded = 0` in `__init__`, incremented once
+per block inside `sync()`. A 40-hour soak caught what that means at a driven
+restart, on both instances independently:
+
+```
+before: 2026-09: peak 365 W, set by the quarter at 2026-09-11T18:45:00+00:00
+        - 10 % of the 3500 W soft limit; 120 quarter(s) banked
+after : 2026-09: peak 365 W, set by the quarter at 2026-09-11T18:45:00+00:00
+        - 10 % of the 3500 W soft limit;   0 quarter(s) banked
+```
+
+Reproduced here before anything was changed, through the real `Controller`, the
+real `P1Ingest`, and a **real restart** — a second `Controller` object against
+the same file on disk, never a re-read of the first:
+
+```
+before: 2026-09: peak 365 W, set by the quarter at 2026-09-10T09:00:00+00:00
+        - 10 % of the 3500 W soft limit; 12 quarter(s) banked
+after : 2026-09: peak 365 W, set by the quarter at 2026-09-10T09:00:00+00:00
+        - 10 % of the 3500 W soft limit;  0 quarter(s) banked
+
+    peak survives the restart: True
+    count survives the restart: False       (12 -> 0, store held 12 rows)
+```
+
+**TARIFF-01's argument, one column over.** That module's whole design is that
+an unreadable store must not read as a zero peak, *because a zero peak is
+disarming*. A coverage figure of zero is disarming in exactly the same way and
+about the same number: the count is what says how much of the billing month the
+watt figure actually covers, and 365 W over 120 quarters and 365 W over 0
+quarters are different claims about the same 365 W. After a restart the page
+made the weaker claim while displaying the stronger one's value. It did not
+under-report the peak — it under-reported **its own evidence**.
+
+Two further defects fell out of the same variable once it was driven, neither
+of them in the ticket:
+
+* **it was never scoped to a month.** It counted every block the *process* had
+  banked, so on 1 October the row read September's tally beside October's "no
+  completed quarter recorded yet". Measured, on the shipped tree:
+  `2026-10: no completed quarter recorded yet - 0 % of the 3500 W soft limit;
+  1 quarter(s) banked`.
+* **it missed the block `restore()` banks.** A stale block closed from the
+  checkpoint goes into `quarter_blocks` without passing through `sync()`, so
+  the counter never saw it.
+
+---
+
+## 1. Decision: the count is READ FROM THE TIER THE PEAK IS READ FROM
+
+The acceptance criterion allowed either route — make the count durable, or stop
+printing a number that silently resets. **Durable**, because the count is the
+useful half of the row and removing it would have cost the operator the one
+thing that says whether the peak means anything yet.
+
+`PeakStore.banked_count(month)` asks the database `SELECT COUNT(*) FROM
+quarter_blocks WHERE month=?`, and `PeakTracker.recorded` is a property over it
+rather than an attribute. Three consequences, and all three are the defects
+above:
+
+* a restart re-reads the same rows, so the figure survives it;
+* the count is per **month**, so it agrees with the peak it is printed beside;
+* a block banked by `restore()` is a row like any other and is counted.
+
+Three things this route deliberately does **not** do:
+
+* **it does not count `len(blocks_in(month))`.** `blocks_in()` returns `[]` on a
+  read error — safe there only because no caller reads its emptiness as a peak,
+  which its own docstring says — so taking its length would rebuild the
+  disarming zero one call further out. `banked_count()` returns **`None`** when
+  the database will not answer.
+* **it does not count `monthly_peak`.** That tier holds one row per *month* and
+  would answer `1` for every month ever measured — wrong by exactly the amount
+  that makes it look plausible. The two tables are proven equal on the **peak**
+  by `recompute_month()`; they were never equal on the **count**.
+* **it does not remove the dedupe.** `_seen` is still what stops `cycle()`'s
+  once-a-second `sync()` re-banking a block that `P1Ingest.blocks` keeps for a
+  day, and `sync()`'s return value is still the number newly banked. What moved
+  is only where the *status page* reads its figure. ⚠️ The check that graded the
+  dedupe used to assert `recorded == 1` — the dedupe and the figure reporting it
+  were the same variable. Counting rows in `quarter_blocks` cannot see a
+  re-bank at all (it is a PRIMARY KEY no-op), so that check is now graded on
+  `sync()`'s **return**, with the store's tally as the second half.
+
+### ⚠️ The unreadable case renders a WORD, not a number
+
+`banked_count()` returns `int | None`; `recorded_in()` renders the `None` as
+the module constant `COUNT_UNREADABLE = "an unreadable number of"`, so the
+sentence reads
+
+```
+... ; an unreadable number of quarter(s) banked
+```
+
+`0` was never available. `None` was rejected too: `f"{None} quarter(s) banked"`
+renders **"None quarter(s) banked"**, which an operator reads as the same zero.
+This is the `PeakReading` trade — no `peak_w_or(default)`, ever — applied to the
+coverage figure: a caller that formats it gets a true sentence in both states,
+and a caller that does arithmetic on it gets a `TypeError`, which is loud.
+
+"0 quarter(s) banked" remains a **true and reachable** sentence: it is what a
+month nothing has been written to says, and part 11 asserts that the two states
+are spelled differently.
+
+---
+
+## 2. Decision: at EQUAL wattage, the EARLIEST quarter keeps the attribution
+
+**First, not most recent.** The reasoning, in the order it matters:
+
+1. **It is not a money question.** The utility bills the wattage; the timestamp
+   is not part of the bill. So the decision is settled entirely on what the
+   status row is *for*.
+2. **The row answers "when did my monthly peak happen".** An operator reading it
+   goes and looks at one event — what was running, what the weather was. A
+   stable answer is the one that can be investigated; "most recent wins"
+   guarantees the answer moves every time the wattage recurs, and an operator
+   who looked yesterday is sent somewhere else today for no reason.
+3. **It is what one reader already did unconditionally.** `recompute_month()`
+   is `ORDER BY offtake_avg_w DESC, quarter_start ASC LIMIT 1` — earliest wins.
+   Choosing "most recent" would have meant changing both readers; choosing
+   "earliest" meant making the other one say out loud what it was already doing
+   by accident.
+
+### ⚠️ And the two readers DID diverge, which is why this is a code change
+
+The `monthly_peak` upsert was `WHERE excluded.peak_w > monthly_peak.peak_w` —
+strictly greater, so an exact tie never wrote and the row kept whichever tied
+block was **written first**. That coincides with *earliest* only while blocks
+arrive in time order. Fed four equal 365 W blocks newest-first, measured on the
+shipped tree:
+
+```
+ascending arrival    monthly_peak -> 09:00:00   recompute_month -> 09:00:00   agree=True
+DESCENDING arrival   monthly_peak -> 09:45:00   recompute_month -> 09:00:00   agree=False
+```
+
+That is a divergence in the derived record that part 8 of `test_tariff.py`
+exists to prove cannot happen — latent, because nothing in the shipped path
+banks out of order today. The upsert now carries the tie term explicitly:
+
+```sql
+WHERE excluded.peak_w > monthly_peak.peak_w
+   OR (excluded.peak_w = monthly_peak.peak_w
+       AND excluded.quarter_start < monthly_peak.quarter_start)
+```
+
+**`peak_w` is untouched.** The `>` term is exactly as it was, no tie can move
+the billed number, and SAFETY-07's guard reads the same watt figure it read
+before. The second term moves only the timestamp.
+
+### ⚠️ AND THE SOAK'S DRIFT WAS NOT A TIE AT ALL
+
+The ticket's reading — "ties at the same wattage are re-attributed to the most
+recent matching quarter" — is **false**, and driving it is what showed that.
+Six exactly-equal 365.0 W quarters on the shipped tree moved the attribution
+**zero** times, because `>` is strict.
+
+What the soak saw was a genuine new maximum **smaller than the row's own
+resolution**. The row renders `{peak_w:.0f}` — whole watts — so 365.0000001 W is
+a new peak to the database and the same `365 W` to the reader:
+
+```
+q0  fed 365.0        -> renders 365 W, attributed 09:00:00
+q1  fed 365.0000001  -> renders 365 W, attributed 09:15:00
+q2  fed 365.0000002  -> renders 365 W, attributed 09:30:00
+```
+
+**Decision: left alone, deliberately.** It is the instrument behaving correctly
+— the peak really did rise — and the alternative, printing more decimal places,
+puts noise in the one row an operator reads at the moment the guard engages, to
+explain a movement that is real. Both cases are pinned in part 12 so that
+neither can be changed by accident, and the distinction is recorded here so the
+next reader does not re-diagnose it as a tie.
+
+---
+
+## 3. What this branch did NOT do, and who owns it
+
+**`main.py`'s status row was not touched.** TARIFF-11 holds `main.py`'s status
+rows on a concurrent branch, and the standing instruction is to stop rather than
+race there. Everything above is in `app/tariff.py`, and the row picks the fix up
+without editing, because `self.peak.recorded` is an attribute access and is now
+a property.
+
+**The residual, stated with its scope.** `recorded` answers for
+`datetime.now()`. The peak beside it follows `checks(when=...)`. The shipped
+install has **exactly one** call site — `self.checks()` with no argument, at
+`main.py:4359` — where the two are the same month, so **the live page is correct
+and durable**. They part company only under the `when=` affordance TEST-17 added
+for the suite, and the mismatch there is strictly smaller than the one it
+replaces (this month's tally, rather than a process-wide total across all
+months).
+
+`PeakTracker.recorded_in(when)` is the scoped form and is shipped. Moving the
+row onto it is:
+
+```python
+- + f"; {self.peak.recorded} quarter(s) banked"
+ + f"; {self.peak.recorded_in(when)} quarter(s) banked"
+```
+
+one token, on one line, inside the block TARIFF-11 owns. `test_tariff.py`
+part 10 **pins the present behaviour** — graded against a row count taken
+straight from `quarter_blocks`, not against the property that produces it — so
+the gap goes red if it changes and cannot be quietly forgotten.
@@ -85,11 +85,14 @@ refusal: the card's own point must land inside 0.02–1.00 EUR/kWh.

 ⚠️ **Its floor is applied to the ENERGY figure and not to the all-in one, and
 that asymmetry was found by a mutation rather than by reasoning.** The shipped
-`price_taxes_eur_kwh` is 0.06 — three times the floor — so a card read a
+`price_taxes_eur_kwh` was 0.06 — three times the floor — so a card read a
 hundred times too small comes out at 0.0016 EUR/kWh of energy, is carried over
 0.02 by the flat tax addend alone, and passes a band applied to the total. The
 hundredfold error is exactly what the band exists for. Graded from both
-directions in `test_price.py` 15e/15i and driven red as M10.
+directions in `test_price.py` 15e/15i and driven red as M10. *(Annotated
+2026-09-13: TARIFF-18 raised the default to 0.11736, nearly six times the
+floor. The asymmetry is unchanged in kind and larger in degree — the flat
+addend that carries a hundredfold-small card over 0.02 got bigger.)*

 ## 4. Fixed coefficients. No expression evaluation of any kind

@@ -155,4 +158,9 @@ granularity it was handed. Graded.
 * **The hour-varying network charge that bites Wallonia.** Separate card.
 * **Raising `price_taxes_eur_kwh` from 0.06 to ~0.12.** Separate card, and an
  owner's decision. Note §3b: the band's floor is deliberately insensitive to
-  whatever that number becomes.
+  whatever that number becomes. *(Annotated 2026-09-13: that card is
+  **TARIFF-18** and it shipped on this branch at **0.11736** — the Eneco
+  residential card for Flanders, September 2026, incl. 6 % VAT, summed from
+  Fluvius Antwerpen distribution 5,35 + bijzondere accijns 4,876 + bijdrage
+  groene stroom en WKK 1,51 c€/kWh. §3b held: the floor is still on the energy
+  figure and nothing in this module needed a new number.)*
@@ -1371,7 +1371,7 @@ does, and only after you have read why.
 |---|---|
 | `price_provider` | `off` (default) or one of the three plugins below |
 | `price_markup_eur_kwh` | Your supplier's margin, EUR/kWh. **Added only when the chosen plugin's feed does not already contain it** |
-| `price_taxes_eur_kwh` | Levies and VAT, EUR/kWh. Same rule |
+| `price_taxes_eur_kwh` | Distribution, levies and VAT, EUR/kWh. Same rule. Defaults to **0.11736** — a real Flemish figure, and **yours is probably different**: see *What `price_taxes_eur_kwh` is made of* below |
 | `export_price_eur_kwh` | The **injection** price. A separate scalar, not a series — see below |
 | `price_csv_path` | Where `manual_csv` reads its file |
 | `price_feed_url` | Override the plugin's default feed. Used **exactly as written** — the add-on appends nothing to it, including the date range, so an override gets whatever horizon that URL returns. Only a host the plugin itself declares is accepted |
@@ -1765,12 +1765,50 @@ hour the feed did not print at all.

 **What you can actually see on the status page.** *Price history* (below) says
 what is held. *Arbitrage* carries the strategy's own sentence, which names the
-firm/provisional split whenever that split is what refused a trade. *Tariff*
-does **not** report the fill: it is the static-profile or Home Assistant
-price-entity sentence, regenerated on the 30 s tick. The provider plan's own
-line — `dynamic_dayahead from generic_dayahead, 48 h, provisional` — goes to the
-**add-on log** at every refresh, alongside `§8.3: 33 of 48 hours carried forward
-from yesterday's profile and flagged provisional; 15 published`.
+firm/provisional split whenever that split is what refused a trade. And
+**Tariff** on the status page reads `provisional` through the morning, because
+since TARIFF-11 that row carries the provider plan itself:
+
+```
+Tariff: no static profile (recomputed this tick); provider plan fetched 412 s
+        ago for a 48 h horizon: dynamic_dayahead from generic_dayahead,
+        60 points over 33 h, 36 firm / 24 carried, 900+3600 s spacing,
+        provisional
+```
+
+⚠️ **The two halves of that row are not computed at the same moment, and the
+row says so.** Everything before the semicolon is the static-profile or Home
+Assistant price-entity sentence, regenerated on the **30 s tick** from options
+alone — no network. Everything after it is the **background refresh's**
+resolution, which runs every 1800 s and is served for up to 5400 s before it is
+retired; `fetched N s ago` is the age of the fetch that produced it and is the
+only figure in the row that tells you whether the feed is still answering. On a
+site with a provider configured and no usable plan the row says that too,
+rather than falling silently back to the static half.
+
+Read the plan half as five separate facts: which *product* the feed publishes
+and which *plugin* read it, how many **points** it carries and how many **whole
+hours** those points cover, how many of the points are **firm** (published for
+their own interval) against **carried** (filled from yesterday under §8.3), the
+**spacing** of the points in seconds — `900+3600` is the normal mixed steady
+state, quarter-hourly firm points beside hourly carried ones — and `provisional`
+whenever any point is carried.
+
+⚠️ **Points and hours are two different numbers and this row used to print one
+of them under the other's name.** `words` was `f"… {len(points)} h"`, so a
+33-hour plan of quarter-hourly points logged `dynamic_dayahead from
+generic_dayahead, 132 h`. It is the same conflation the *Price history* row
+carried before FCST-04 and the same one `at()` carried before TARIFF-14, and it
+is **not a constant factor**: measured over a 40-hour soak the overstatement
+ranged **1.79× to 5.33×**, because the carried points are hourly while the firm
+ones are quarter-hourly, so the ratio moves with the mix as the day goes on.
+The same sentence is in the **add-on log** at every refresh, alongside `§8.3:
+33 of 48 hours carried forward from yesterday's profile and flagged
+provisional; the feed published 60 points over the other 15 hours`.
+
+The §8.3 refusal an operator reads when a trade is declined counts in the same
+two units — `§8.3: only 1 of 96 points carry a published price - 1 of 24 hours`
+— where it used to say `only 1 of 96 hours` about a 24-hour day.

 The plan is also now cut to the horizon you asked for, which means **hours that
 have already elapsed are no longer in it**. That is a real change to arbitrage:
@@ -1832,6 +1870,211 @@ uses the result as a cheap-window hint for the maintenance charge. They are
 — configure two of them and the add-on refuses to start, naming the conflict,
 because the add-on reads exactly one and the loser is silent. Use one.

+### The three buckets — which price components can move a decision (TARIFF-17)
+
+**Read this before adding a price component of any kind.** The optimiser reads
+exactly two quantities off a price series, and nothing else:
+
+- the **spread**, `max − min` over the *firm* points, weighed against
+  `cycle_cost_threshold_eur`; and
+- **which hour is cheapest**, `min(firm, key=…)` — the hour a battery would
+  buy in.
+
+Every component of a Belgian bill reaches those two through one of three
+buckets, and which bucket it is in is a property of its *shape*, not of its
+size:
+
+| bucket | what it looks like | reaches the decision? |
+|---|---|---|
+| **LEVEL** | additive, **identical every hour** | **No — provably.** An additive constant cancels exactly in `max − min`, and adding it to every point leaves the argmin where it was |
+| **SPREAD** | **multiplicative** on the spot index | **Yes.** It scales the spread against a fixed `cycle_cost_threshold_eur` |
+| **ORDER** | **varies** by hour, block or day-type | **Yes, and worst.** It changes *which hour is cheapest* |
+
+Measured on the real arithmetic (`test_price.py` section 16b, printed on every
+run): with a flat taxes figure of 0.00, 0.0739, 0.11736 (the shipped default),
+0.1198, 0.1327 or 1.00 EUR/kWh, the same 24-hour feed is cheapest at **13:00 in
+all six cases** and its spread is **0.1500 EUR/kWh in all six cases**. That is
+the LEVEL bucket doing nothing, and it is not a rounding artefact — it is
+arithmetic.
+
+Three consequences worth having in mind:
+
+1. **`price_taxes_eur_kwh` is not a wrong number and never was.** It sits in
+   the LEVEL bucket and *cannot* distort either quantity. What it also cannot
+   do is express a component that varies by hour — which is why
+   `price_taxes_profile` exists. The defect TARIFF-17 closed was a **missing
+   capability**, not a bad constant.
+2. **`custom_formula`'s `factor` is a SPREAD component, and its `offset` is
+   LEVEL.** The contract price is `(factor × index + offset) × (1 + VAT)`, so
+   the spread over a feed is `factor × (1 + VAT) × (max index − min index)` —
+   the offset drops out entirely, and the spread is *proportional* to `factor`.
+   Moving `factor` from 0.100 to 0.10812 therefore moves the spread by exactly
+   **+8.1 %** on any feed whatever. A coefficient typed one digit wrong is not
+   a small pricing error; it is a different trading threshold. The VAT rate is
+   multiplicative on the whole expression, so it is SPREAD too.
+3. **A check that grades the spread is grading the wrong bucket.** An
+   implementation that reads an hour-varying table *once* and adds the same
+   number to every point produces a series of the right magnitude and the wrong
+   shape — the LEVEL bucket wearing a period table. The spread would look
+   plausible; the buy hour would be wrong. So the regression check for an
+   ORDER-bucket component asserts **which hour is cheapest**, not how big the
+   spread is (`test_price.py` 16c and 16d).
+
+⚠️ **Where the buckets are today.** `price_markup_eur_kwh`,
+`price_taxes_eur_kwh` and `custom_formula`'s `offset` are LEVEL.
+`custom_formula`'s `factor` and its VAT rate are SPREAD. `price_taxes_profile`
+is the only ORDER component the add-on has. Anything added next belongs in one
+of the three, and saying which is part of adding it.
+
+### What `price_taxes_eur_kwh` is made of, and why yours is different (TARIFF-18)
+
+**It ships at `0.11736` EUR/kWh.** That is the all-in non-energy part of a
+Flemish residential bill — everything on your invoice that is *not* the energy
+itself — read off the Eneco residential card for Flanders, **September 2026**,
+**including 6 % VAT**:
+
+| component | c€/kWh |
+|---|---|
+| Fluvius distribution (**Antwerpen**) | 5,35 |
+| Bijzondere accijns, *"Alle verbruik"* — no volume bands | 4,876 |
+| Bijdrage groene stroom en WKK Vlaanderen | 1,51 |
+| Energiebijdrage | **0** |
+| **total** | **11,736 c€/kWh = 0.11736 €/kWh** |
+
+The rows are in the code, in `app/price.py`'s
+`FLEMISH_TAXES_COMPONENTS_EUR_KWH`, and `test_price.py` section 1b re-adds them
+and refuses a default that is not their sum. It replaces a shipped `0.06`,
+which was roughly **half** the true figure and had no recorded provenance at
+all.
+
+⚠️ **`energiebijdrage` is zero and that is not a mistake.** *"Vanaf 1 augustus
+2026 bedraagt de energiebijdrage 0 EUR/MWh"* — it was merged into the
+bijzondere accijns. If you are re-deriving this total from a guide written
+before that date you will find a separate energiebijdrage line; adding it would
+count it twice. It is carried as a **zero row** rather than left out for
+exactly that reason.
+
+⚠️ **THIS IS A PER-DSO FIGURE AND YOURS IS PROBABLY NOT 0.11736.** Only the
+distribution row moves. Across the eight Fluvius DSOs it runs **5,28 c€/kWh**
+(Midden-Vlaanderen) to **6,70** (West), so the Flemish all-in total runs about
+**0.117 to 0.131 €/kWh** — a 1,42 c€/kWh spread, which on 4 000 kWh a year is
+about €57. The other two rows are Flanders-wide and do not move. **Look up your
+own distribution row, add the same accijns and groenestroombijdrage, and type
+the total.**
+
+⚠️ **A WALLOON OR BRUSSELS SITE SHOULD NOT USE THIS SCALAR AT ALL.** Their
+distribution tariff has a **day and a night band** — `Enkelvoudig | Dag |
+Nacht | Uitsl. nacht` on the same card, where Fluvius prints a single rate —
+and a flat figure flattens exactly the component that is anti-correlated with
+what the battery wants to do. Use **`price_taxes_profile`** (the next section);
+it is the only ORDER-bucket component the add-on has.
+
+⚠️ **THIS IS A DISPLAY AND GUARD FIX. IT DOES NOT IMPROVE ARBITRAGE, AND IT
+CANNOT.** `price_taxes_eur_kwh` is a **LEVEL** component — added identically to
+every hour — so it **cancels exactly** in `max − min` and leaves the argmin
+where it was. It does not change which hour is cheapest, it does not change the
+spread, and it does not make any trade happen that did not happen before. See
+*The three buckets* above, where six flat scalars spanning and exceeding the
+whole per-DSO range give the identical cheapest hour and the identical spread
+to the last digit. What raising it **does** change is exactly two things:
+
+* **every figure an operator reads** — the all-in prices on the status page,
+  `custom_formula`'s startup preview and the recorded price history. At half
+  the true non-energy component they made the add-on look considerably better
+  than it is.
+* **§17's negative-price guard** (`arbitrage.py`), which is the one rung that
+  tests an **absolute** all-in price rather than a difference. The guard fires
+  when `spot < −(markup + taxes)`, so its boundary moved from **−0.09000** to
+  **−0.14736 €/kWh** of spot. A spot hour at −0.11868 €/kWh used to read
+  **−0.02868 €/kWh** all-in and the discharge was refused as paid-for disposal;
+  at the real tax level it reads **+0.02868** and the discharge is allowed,
+  because the operator really does pay those levies and that hour really was
+  profitable (`test_arbitrage.py` section 2c drives both, and pins the boundary
+  from below as well).
+
+⚠️ **Which is why the default sits near the LOW end of the per-DSO band rather
+than in the middle of it.** The two error directions are not symmetric. Set too
+**high**, the figure carries a genuinely negative hour up above zero and the
+add-on exports into paid-for disposal — §17's own regression case. Set too
+**low**, it only declines a discharge that would have paid. Where one default
+has to stand in for eight DSOs, it belongs at the bottom.
+
+**If you set this yourself, nothing above affects you.** A site with its own
+`price_taxes_eur_kwh` keeps it; the default only answers where the option is
+absent from the stored options blob.
+
+### Levies and VAT by time of day (`price_taxes_profile`)
+
+**Leave this empty unless your network tariff really does have a day and a
+night rate**, which in Flanders it does not. Fluvius distribution is a single
+rate: its row on the tariff card reads `Normaal | Uitsl. nacht`, and
+*exclusive night* is a **separate physical circuit** (a night-storage heater on
+its own meter), not the night register of a dual-rate meter. For a Flemish site
+the flat `price_taxes_eur_kwh` is correct, and this option changes nothing.
+
+**Wallonia and Brussels are different, and the same card proves it.** The
+Walloon DSOs and Sibelga get four columns — `Enkelvoudig | Dag | Nacht |
+Uitsl. nacht` — and the day/night gap is real money (c€/kWh):
+
+| DSO | enkelvoudig | dag | nacht | gap |
+|---|---|---|---|---|
+| ORES | 11,98 | 13,27 | 7,39 | **5,88** |
+| AIESH | 13,64 | 15,17 | 8,21 | **6,96** |
+| Tecteo RESA | 11,06 | 12,20 | 7,01 | 5,19 |
+| Sibelga (Brussels) | 9,39 | 9,39 | 7,10 | 2,29 |
+| ORES IMPACT (2026) | — | 16,578 | 5,090 | **11,49** |
+
+⚠️ **The bands are anti-correlated with what the battery wants to do.** The
+cheap network hours are the cheap spot hours. So flattening them does not
+merely shift the curve — it **systematically understates the true spread**, and
+the add-on declines cycles that are genuinely profitable. On ORES's bands over
+one ordinary winter weekday the measured effect is: cheapest hour **13:00 →
+03:00**, spread **0.1500 → 0.1788 EUR/kWh**.
+
+It is written in **exactly the same grammar as `static_profile`** — the same
+periods, the same day selectors, the same rule that every day type is covered
+once with no gap and no overlap, the same DST handling. It is literally the
+same parser; there is no second tiling rule, because a second one would be a
+second set of 23- and 25-hour-day bugs.
+
+```json
+{"periods": [
+  {"name":"dag",  "from":"07:00","to":"22:00","days":"mon-fri","eur_per_kwh":0.1327},
+  {"name":"nacht","from":"22:00","to":"07:00","days":"mon-fri","eur_per_kwh":0.0739},
+  {"name":"nacht","from":"00:00","to":"24:00","days":"sat,sun", "eur_per_kwh":0.0739}]}
+```
+
+- ⚠️ **`eur_per_kwh` here is the LEVIES ALONE, not an all-in price.** It is the
+  non-energy part of the bill for that band, and the add-on adds it to whatever
+  your price source publishes — exactly as it adds the flat figure. This is the
+  one place the two options differ in meaning while sharing a grammar, and the
+  refusal you get for leaving the number out says which one is wanted.
+- ⚠️ **The card prints cents. This option takes EUR.** ORES prints `13,27`;
+  type `0.1327`. A whole card typed in cents is refused at startup, naming both
+  bands and the factor — including the cards (Sibelga's 9,39 / 7,10) whose
+  figures are small enough to slip past the ±10 EUR/kWh bound the parser holds
+  every price to.
+- ⚠️ **Set this *or* `price_taxes_eur_kwh`, not both.** The table wins when it
+  is set, so a scalar left at a non-default value beside it would be a number
+  you typed that decides nothing. That is refused at startup rather than
+  silently resolved; leave `price_taxes_eur_kwh` at its shipped `0.11736` when
+  you fill this in. ⚠️ **A scalar still sitting on the superseded `0.06` is
+  also accepted**, and deliberately so — TARIFF-18 moved that default, and your
+  stored options blob carries the old number whether you typed it or not, so
+  refusing it would have stopped working Walloon and Brussels sites on an
+  upgrade over a figure the table overrides anyway.
+- A **malformed table is refused at startup**, not at the next fetch. It is
+  read on the ~30 s planning path, and a table that first fails at 03:00 is a
+  site that stops pricing at 03:00 — which §11.4 turns into a quiet fallback
+  that looks exactly like a healthy fixed-tariff day.
+- It applies to the components the framework **adds**: `generic_dayahead`
+  (which declares `{ENERGY}`) and `custom_formula` (which declares
+  `{ENERGY, MARKUP}`) both get it. `manual_csv` publishes an all-in figure and
+  is untouched — the table is routed through the same `capabilities().adds`
+  rule as the scalar, not bolted on.
+- It does **not** apply to `static_profile`, whose prices are already all-in,
+  nor to `export_price_eur_kwh`.
+
 ### Static day/night and fully-fixed tariffs (`static_profile`)

 Most Belgian households are **not** on a dynamic contract, and an EMS that only
@@ -1951,6 +2194,33 @@ only thing that decides whether a request leaves the machine is
 `price_provider`: with it `off`, the refresh resolves the static profile in
 memory and opens no connection.

+**The *Arbitrage* status row says which of three things is true** — trading is
+off, trading is on and this cycle reached no decision, or a decision was
+reached — and it stamps every decision with its age. Until TARIFF-11 it said
+one of two, because the first two rendered identically. They have three
+different remedies:
+
+| the row opens with | what is true | what to do |
+|---|---|---|
+| **off** — *"arbitrage_enabled is false, so nothing trades"* | Trading is not armed. Nothing will happen, and nothing is wrong | Arm it, if you meant to |
+| **ON (arbitrage_enabled), but NO DECISION has been reached yet** | Trading **is** armed, and no cycle has run as far as the arbitrage step. The row then names the control loop's own reason, usually *inputs missing* | Fix the input the loop names |
+| **decided N s ago:** … | The strategy answered this cycle, and `N` is how old that answer is | Read the sentence that follows — it is the strategy's own |
+| **no decision this cycle (reason); the last one was taken N s ago:** … | Trading is armed, a decision stands from an earlier cycle, and **this** cycle stopped before reaching the step | As row 2 — the standing decision is history, not a verdict on now |
+
+A fifth rendering — *"…no decision this cycle …, and none stands from an
+earlier one"* — covers the case where trading was armed after a cycle had
+already run without it.
+
+⚠️ **The second row used to render exactly like the first one**, naming
+`arbitrage_enabled` on a site where `arbitrage_enabled` is `true`. A cycle with
+a missing input returns after roughly `stale_input_s` (15 s by default) without
+reaching the arbitrage step at all, so on an armed site the row reported *off*
+at startup and, once one decision had been taken, went on showing that decision
+for up to 15 s after the site stopped deciding anything. The age on the third
+row is printed **always**, including when it is zero: a row that reports
+staleness only once it is stale cannot be told from one that never reports
+it.
+
 ### Site

 | option | meaning |
@@ -831,13 +831,16 @@ document (`'  216.080 ->   0.30123'`), and M13 is red.

 **M10 is `+0 B` and it is a real defect, not a synthetic one.** It came out of
 writing the mutation rather than out of review: `implausible_all_in()`'s floor
-was applied to the all-in figure, and `price_taxes_eur_kwh` ships at 0.06 —
+was applied to the all-in figure, and `price_taxes_eur_kwh` shipped at 0.06 —
 **three times the 0.02 floor** — so a card read a hundred times too small
 (0.0016 EUR/kWh of energy) is carried over the floor by the flat tax addend
 alone and passes. The hundredfold error is exactly what that band exists for.
 The floor is applied to the **energy** figure now and the ceiling to the all-in
 one, both directions are graded, and the trap is stated as a check in its own
-right so the asymmetry cannot be "tidied up" later.
+right so the asymmetry cannot be "tidied up" later. *(Annotated 2026-09-13:
+TARIFF-18 raised that default to 0.11736, **nearly six times** the floor. The
+addend that does the carrying got BIGGER, so the trap is wider than when M10
+was measured and the asymmetry is more load-bearing rather than less.)*

 **M15 is the one the framework CANNOT catch, and the reds say which half does.**
 Declaring `ALL_IN` makes `assemble()` add nothing, and section 3's all-in check
@@ -520,13 +520,16 @@ def implausible_all_in(spec: FormulaSpec, taxes_eur_kwh: float):

    ⚠️ THE LOW END IS GRADED ON THE ENERGY COMPONENT AND THE HIGH END ON THE
    ALL-IN FIGURE, AND THAT ASYMMETRY IS THE CHECK RATHER THAN AN OVERSIGHT.
-    `price_taxes_eur_kwh` ships at 0.06, which is three times the low bound -
-    so a card read a HUNDRED times too small comes out at 0.0016 EUR/kWh of
-    energy, is carried over the floor by the flat tax addend alone, and passes
-    a band applied to the all-in total. The hundredfold error is precisely
-    what this exists to catch, so the floor is applied where it can still see
-    it. The ceiling is applied to the all-in figure because that is the number
-    the site is really billed at, and taxes only push it up.
+    `price_taxes_eur_kwh` ships at 0.11736 (TARIFF-18; it was 0.06 before, and
+    the argument was already decisive at that figure), which is nearly SIX
+    times the low bound - so a card read a HUNDRED times too small comes out at
+    0.0016 EUR/kWh of energy, is carried over the floor by the flat tax addend
+    alone, and passes a band applied to the all-in total. The hundredfold error
+    is precisely what this exists to catch, so the floor is applied where it
+    can still see it. ⚠️ Raising the default made this trap WIDER, not
+    narrower: the addend that does the carrying got bigger. The ceiling is
+    applied to the all-in figure because that is the number the site is really
+    billed at, and taxes only push it up.

    ⚠️ AND THE LIMIT, WITH THE CLAIM. This grades the CARD'S OWN POINT - one
    price, at the monthly index the card assumed - and not every hour of every
@@ -218,6 +218,106 @@ def pack_energy_of(inv):
                                inv.capacity_kwh, inv.max_w)


+def tariff_plan_row(plan, tick_words: str, *, age_s, horizon_h: float,
+                    provider: bool, max_age_s: float) -> str:
+    """The *Tariff* status row: the 30 s tick's sentence AND the provider plan.
+
+    THE DEFECT THIS PREVENTS (TARIFF-11). `origin`, `product`, the horizon,
+    the firm/carried split and the spacing appeared in NO status row. The row
+    was `static_status()`'s sentence alone, computed on the 30 s I/O-free tick
+    from its own static plan, and it NEVER SAW the provider plan - it read
+    `'no static profile'` at all 802 samples of a 40-hour soak on a site whose
+    feed was answering. The only external evidence a plan existed at all was
+    one `_LOG.info` line, and that line carried the point<->hour mislabel
+    `TariffPlan.words` is fixed for.
+
+    ⚠️ TWO SOURCES, TWO CLOCKS, AND THE ROW SAYS SO IN WORDS. These sentences
+    are NOT computed at the same moment and presenting them as though they
+    were would be a new version of the defect being fixed:
+
+        `tick_words`  static_status() / the Home Assistant price entities,
+                      regenerated on THIS tick, every 30 s, I/O-free;
+        `plan`        the background refresh's resolution, up to
+                      TARIFF_REFRESH_S old before it is retried and up to
+                      TARIFF_MAX_AGE_S (5400 s since TARIFF-12) old before
+                      `fresh_tariff_plan()` retires it.
+
+    So the plan half is stamped with its OWN age in seconds, measured from
+    `tariff_at` - the moment of the fetch that produced it, which TARIFF-12
+    deliberately does not move on a kept plan.
+
+    ⚠️ AND `age_s` IS THE CALLER'S MEASUREMENT, NOT THIS FUNCTION'S. A clock
+    read in here would be a second clock disagreeing with the one that decided
+    the plan was fresh enough to pass at all.
+
+    ⚠️ "NO PLAN" IS SAID OUT LOUD ON A SITE THAT CONFIGURED A PROVIDER. A
+    dynamic site whose refresh has never completed, or whose plan has aged
+    past `max_age_s`, is the exact state the soak measured; rendering it as
+    the bare static sentence is how it stayed invisible for 802 samples.
+    """
+    if plan is None:
+        if not provider:
+            return tick_words
+        return (f"{tick_words} (recomputed this tick); NO provider plan - "
+                f"none has been resolved yet, or the last one is older than "
+                f"{max_age_s:.0f} s")
+    return (f"{tick_words} (recomputed this tick); provider plan fetched "
+            f"{age_s:.0f} s ago for a {horizon_h:.0f} h horizon: {plan.words}")
+
+
+def arbitrage_row(*, on: bool, decision, decided_at, cycle_at, now,
+                  why: str) -> str:
+    """The *Arbitrage* status row: THREE states, which used to render as two.
+
+    THE DEFECT THIS PREVENTS (TARIFF-11). The row was
+    `"off (arbitrage_enabled)" if self.arb is None else self.arb.explain()`,
+    under a comment asserting that `self.arb is None` if and only if
+    `arbitrage.enabled(self.o)` was False. IT IS NOT: `cycle()` returns at the
+    input hold - inputs missing, `bad_for < stale_input_s`, default 15 s -
+    BEFORE it reaches `self.arb = None`. Driven: `arbitrage_enabled: true`
+    plus a sensor answering `None` gives `arbitrage.enabled(opts) = True`,
+    `self.arb = None` (its `__init__` value, untouched) and a row reading
+    `off (arbitrage_enabled)` - NAMING AN OPTION THAT IS ON. Past the first
+    completed cycle the same early return leaves the PREVIOUS decision
+    standing instead, which the row then rendered as a current one.
+
+    THE THREE FACTS, and they are three because they have three remedies:
+
+        trading is off          the operator has not armed it. Nothing is
+                                wrong and nothing will happen.
+        no decision this cycle  it is armed, and the cycle did not get as far
+                                as the arbitrage step. `why` is the control
+                                loop's own reason - usually "inputs missing".
+        a decision              the strategy's own sentence, with the age of
+                                the cycle that produced it.
+
+    ⚠️ `on` IS READ FROM THE OPTIONS, NOT INFERRED FROM `decision is None`.
+    Inferring it is the whole defect: the option is the only thing that
+    answers "is trading armed", and it is available on every render.
+
+    ⚠️ THE AGE IS ALWAYS PRINTED, INCLUDING WHEN IT IS ZERO. A row that
+    reports staleness only once it is stale cannot be told, on any single
+    render, from one that never reports it - and the bound TARIFF-10's
+    comment claimed did not exist is ~15 s of it.
+    """
+    if not on:
+        return "off - `arbitrage_enabled` is false, so nothing trades"
+    if decided_at is None:
+        return (f"ON (`arbitrage_enabled`), but NO DECISION has been reached "
+                f"yet - no cycle has run as far as the arbitrage step. The "
+                f"loop's own reason: {why or 'none recorded'}")
+    age = (now - decided_at).total_seconds()
+    stale = cycle_at is not None and decided_at < cycle_at
+    head = (f"no decision this cycle ({why or 'no reason recorded'}); the "
+            f"last one was taken {age:.0f} s ago: " if stale else
+            f"decided {age:.0f} s ago: ")
+    if decision is None:
+        return (f"ON (`arbitrage_enabled`), no decision this cycle "
+                f"({why or 'no reason recorded'}), and none stands from an "
+                f"earlier one")
+    return head + decision.explain()
+
+
 class Controller:
    def __init__(self, opts: dict, hass: HomeAssistant, store, mqtt_pub, *, stop,
                 peak_db_path: str = "/data/tariff.db",
@@ -796,6 +896,19 @@ class Controller:
        self.tariff_plan = None
        self.tariff_at = None
        self.arb = None
+        # TARIFF-11. WHEN the standing arbitrage decision was taken, or None if
+        # this controller has never reached the arbitrage step. ⚠️ `self.arb is
+        # None` DOES NOT MEAN "TRADING IS OFF" AND NEVER DID - see
+        # `arbitrage_row()`. It also means "cycle() returned before the step
+        # ran", and at that point `self.arb` is either this attribute's initial
+        # None (startup) or the PREVIOUS cycle's decision (an input hold), and
+        # the status row rendered all three identically.
+        self.arb_at = None
+        # TARIFF-11. When the most recent cycle() STARTED. `arb_at < cycle_at`
+        # is the exact, derived statement of "the latest cycle did not get as
+        # far as the arbitrage step", which is the fact the *Arbitrage* row
+        # used to render identically to "trading is switched off".
+        self.cycle_at = None
        self._arb_action = None
        self.inputs_bad_since = None
        # SAFETY-03. What the loop's OWN bounds did last cycle - a
@@ -1565,6 +1678,24 @@ class Controller:
            self.cheap, self.tariff_words = static_status(
                o, datetime.now(timezone.utc))

+        # ⚠️ TARIFF-11. THE PROVIDER PLAN REACHES THE *Tariff* ROW HERE, AND
+        # THIS IS THE ONLY PLACE THE TWO SOURCES MEET. Everything above is the
+        # 30 s I/O-free tick; `fresh_tariff_plan()` is an attribute read and an
+        # age comparison against TARIFF_MAX_AGE_S - still no fetch on this path,
+        # which is the rule the whole branch above exists to keep. What the row
+        # gains is the plan's SHAPE (origin, product, horizon, the firm/carried
+        # split, the spacing) and what it must never gain is the suggestion
+        # that the two halves were computed at the same instant, so the plan
+        # half carries its own age in seconds. See `tariff_plan_row()`.
+        _tick = datetime.now(timezone.utc)
+        _standing = self.fresh_tariff_plan(_tick)
+        self.tariff_words = tariff_plan_row(
+            _standing, self.tariff_words,
+            age_s=(None if _standing is None
+                   else (_tick - self.tariff_at).total_seconds()),
+            horizon_h=float(price_option(o, "price_horizon_h")),
+            provider=provider_configured(o), max_age_s=TARIFF_MAX_AGE_S)
+
        if self.inputs_ok:
            if self.inputs_bad_since is not None:
                self.log_event("inputs recovered")
@@ -1918,6 +2049,11 @@ class Controller:
        method's only job is to state honestly what each strategy wants.
        """
        now = datetime.now(timezone.utc)
+        # ⚠️ BEFORE THE FIRST `return` OF THIS METHOD, ON PURPOSE (TARIFF-11).
+        # It stamps that a cycle RAN, which is a different fact from any of the
+        # decisions the cycle may or may not reach, and the status row needs
+        # the two separately.
+        self.cycle_at = now

        # ⚠️ EACH PACK ON ITS OWN READING, NOT "the SoC". §12's recalibration
        # drains and refills ONE pack and grades ONE coulomb counter, so each
@@ -2577,7 +2713,13 @@ class Controller:
        # `frozenset()` would be main.py asserting a forecast is healthy when
        # there is not one, which is exactly what static_tariff's `uncertainty`
        # argument has no default in order to prevent.
-        self.arb = None
+        # ⚠️ TARIFF-11: BOTH ATTRIBUTES, AND `arb_at` IS WHAT MAKES THE ROW
+        # HONEST. Reaching this line is the only proof that this cycle got as
+        # far as the arbitrage step; the early return at the input hold above
+        # leaves BOTH standing at whatever the last completed cycle left, and
+        # `arb_at` is then the age the status row reports rather than a
+        # decision presented as current.
+        self.arb, self.arb_at = None, now
        if arbitrage.enabled(self.o):
            floor_pct, ceiling_pct = arbitrage.soc_bounds(self.o)
            charge_w, discharge_w = self.trade_power_w(floor_pct, ceiling_pct)
@@ -4481,15 +4623,23 @@ class Controller:
            # every refusal it can make already carries a reason a human can
            # act on, and "Arbitrage: no" would throw all of them away.
            #
-            # ⚠️ TARIFF-10 RE-READ THIS STRING AND LEFT IT ALONE, which is worth
-            # saying because that card is about the two switches being
-            # different. `self.arb` is None if and only if
-            # `arbitrage.enabled(self.o)` was False, so `off (arbitrage_enabled)`
-            # still names the option that is actually off - and on a site with a
-            # provider configured it is now the row that says the prices
-            # arriving on the *Price history* row above are moving nothing.
-            ("Arbitrage", "off (arbitrage_enabled)" if self.arb is None
-             else self.arb.explain()),
+            # ⚠️ TARIFF-10 RE-READ THIS STRING AND LEFT IT ALONE UNDER A
+            # COMMENT THAT WAS FALSE, AND TARIFF-11 IS THAT CORRECTION. The
+            # claim was that `self.arb is None` **if and only if**
+            # `arbitrage.enabled(self.o)` was False. Only the forward direction
+            # holds: `cycle()` returns at the input hold (`bad_for <
+            # stale_input_s`, default 15 s) BEFORE it reaches `self.arb = None`
+            # at all, so on an armed site `self.arb` is `__init__`'s None at
+            # startup and the PREVIOUS cycle's decision during a later hold -
+            # and the row rendered `off (arbitrage_enabled)` on a site whose
+            # `arbitrage_enabled` is `true`. `arbitrage_row()` reads the option
+            # instead of inferring it, and separates "trading is off" from "no
+            # decision was reached this cycle"; `cycle_at` and `arb_at` are what
+            # make the second one an observation rather than a guess.
+            ("Arbitrage", arbitrage_row(
+                on=arbitrage.enabled(self.o), decision=self.arb,
+                decided_at=self.arb_at, cycle_at=self.cycle_at,
+                now=datetime.now(timezone.utc), why=self.reason)),
        ]
        return {
            "banner": banner, "level": level, "rows": rows, "checks": checks,
@@ -818,6 +818,69 @@ def plan_is_provisional(read: PriceRead) -> bool:
 # Options: what a plugin may see, and what it may not
 # --------------------------------------------------------------------------- #

+# --------------------------------------------------------------------------- #
+# TARIFF-18: what `price_taxes_eur_kwh` IS MADE OF
+# --------------------------------------------------------------------------- #
+
+# ⚠️ THE DEFECT THIS TABLE PREVENTS IS THE ONE THE SHIPPED 0.06 WAS: A NUMBER
+# NOBODY COULD SOURCE. 0.06 EUR/kWh is roughly HALF the real Flemish non-energy
+# figure, and because no reader could see what it was made of there was nothing
+# to argue with. Every row below is one line of the Eneco residential card for
+# Flanders, September 2026, INCLUDING 6 % VAT, converted from the c EUR/kWh the
+# card prints to the EUR/kWh this option takes. `price_taxes_eur_kwh`'s default
+# is their sum, and test_price.py section 1b re-adds them and refuses a default
+# that is not exactly that.
+#
+# ⚠️ THIS IS A PER-DSO FIGURE, AND IT IS THE DISTRIBUTION ROW THAT MOVES. Across
+# the eight Fluvius DSOs that row runs 5,28 c EUR/kWh (Midden-Vlaanderen) to
+# 6,70 (West), so the all-in Flemish total runs about 0.117 to 0.131 EUR/kWh.
+# A site outside Antwerpen should type its own total; the other two rows are
+# Flanders-wide and do not move with the DSO.
+#
+# ⚠️ AND THE DEFAULT SITS NEAR THE LOW END OF THAT BAND ON PURPOSE, BECAUSE THE
+# TWO ERROR DIRECTIONS ARE NOT SYMMETRIC. This scalar is a LEVEL component: it
+# cancels exactly in `max - min` and cannot move which hour is cheapest
+# (test_price.py 16b measures that as a family). The one DECISION it reaches is
+# §17's negative-price guard in arbitrage.py, which tests the ABSOLUTE all-in
+# price of the sell hour. A figure set too HIGH carries a genuinely negative
+# hour up above zero, and the add-on exports into paid-for disposal - the exact
+# case §17 exists to refuse. A figure set too LOW only declines a trade that
+# would have paid. So where a default must stand in for eight different DSOs,
+# it belongs at the bottom of the band and not in the middle of it.
+#
+# ⚠️ `energiebijdrage` IS ZERO, AND IT IS A ROW HERE RATHER THAN AN ABSENCE.
+# "Vanaf 1 augustus 2026 bedraagt de energiebijdrage 0 EUR/MWh" - it was merged
+# into the bijzondere accijns. Anyone re-deriving this total from a guide
+# written before that date will find a separate energiebijdrage line and add it
+# on top of an accijns that already contains it. The zero row is here so that
+# the double-count is visible as a decision rather than as an omission.
+FLEMISH_TAXES_COMPONENTS_EUR_KWH = (
+    ("Fluvius distribution, Antwerpen", 0.0535),
+    ("Bijzondere accijns, 'Alle verbruik' - no volume bands", 0.04876),
+    ("Bijdrage groene stroom en WKK Vlaanderen", 0.0151),
+    ("Energiebijdrage - 0 EUR/MWh since 2026-08-01, inside the accijns", 0.0),
+)
+
+# ⚠️ TARIFF-18, AND IT IS NOT HOUSEKEEPING - IT DECIDES WHICH CONFIGS START.
+# TARIFF-17's rung in validate.py refuses a site that sets `price_taxes_profile`
+# AND leaves `price_taxes_eur_kwh` at something other than the shipped default,
+# because the table wins and the scalar would decide nothing. It compares
+# against the DEFAULT rather than against presence, because the Supervisor sets
+# `App.options = deepmerge(config.yaml defaults, stored options)` and a saved
+# blob therefore carries every schema key whether the operator typed it or not
+# (measured: the reference install's export is 70 of 71 keys - CHANGELOG 0.9.0,
+# `tools/supervisor_selfapi_probe.py` §D).
+#
+# So moving the default turns a previously ACCEPTED configuration into
+# `SystemExit(78)`. A site that stored 0.06 - which is every install that has
+# ever saved its configuration - and that also carries a taxes table would stop
+# starting on the upgrade, over a number it never typed and that decides
+# nothing. That refusal would be TRUE and USELESS: the rung's subject is a
+# number the OPERATOR typed, and a superseded shipped default is not one. It
+# still reads as "untouched" here, and the rung's sentence names both figures.
+SUPERSEDED_TAXES_DEFAULTS_EUR_KWH = (0.06,)     # TARIFF-02 .. TARIFF-17
+
+
 # ⚠️ CFG-03, AND HOW THIS TICKET AVOIDS WIDENING IT. Option defaults in this
 # add-on already live in three places - config.yaml, main.py's `o.get(k, X)`
 # fallbacks, and a dataclass default - held apart only by a tripwire in
@@ -836,7 +899,9 @@ def plan_is_provisional(read: PriceRead) -> bool:
 PRICE_OPTION_DEFAULTS = {
    "price_provider": "off",
    "price_markup_eur_kwh": 0.03,      # §14 tariffs.energy_price.markup_eur_kwh
-    "price_taxes_eur_kwh": 0.06,       # §14 tariffs.energy_price.taxes_eur_kwh
+    # TARIFF-18: the sum of FLEMISH_TAXES_COMPONENTS_EUR_KWH above, to the
+    # card's own last digit. §14 tariffs.energy_price.taxes_eur_kwh.
+    "price_taxes_eur_kwh": 0.11736,
    "export_price_eur_kwh": 0.04,      # §14 tariffs.export_price_eur_kwh (AC4)
    "price_csv_path": "/share/goodwe_prices.csv",
    "price_feed_url": "",
@@ -851,6 +916,18 @@ PRICE_OPTION_DEFAULTS = {
    # test_price.py section 1. A second defaults dict in the new module would be
    # a fourth place option defaults live, which is exactly the open ticket.
    "static_profile": "",
+    # TARIFF-17. A JSON object in `static_profile`'s OWN period grammar whose
+    # per-period `eur_per_kwh` is the TAXES COMPONENT for that band, not an
+    # all-in price; "" is unset and the scalar above decides. Parsed and
+    # validated by app/static_tariff.py (`parse_taxes_profile`), refused at
+    # startup by validate.py - the `static_profile` precedent exactly, and here
+    # for the same CFG-03 reason: this dict is the ONE in-code mirror of
+    # config.yaml.
+    #
+    # ⚠️ IT IS IN FRAMEWORK_KEYS. A plugin that could read this could add the
+    # taxes a second time, per hour, which is the double-counting defect trap 1
+    # exists to refuse - wearing a period table instead of a scalar.
+    "price_taxes_profile": "",
    # TARIFF-15. A JSON object carrying ONE contract's two coefficients, the
    # units they are printed in, its VAT rate and the card figures the add-on
    # grades them against; "" is unset. Parsed and validated by
@@ -884,6 +961,12 @@ PRICE_OPTION_DEFAULTS = {
 # that can double-count, so `PluginOptions` refuses them by name. Trap 1.
 FRAMEWORK_KEYS = frozenset({
    "price_markup_eur_kwh", "price_taxes_eur_kwh", "export_price_eur_kwh",
+    # TARIFF-17. The hour-varying spelling of `price_taxes_eur_kwh`, and it
+    # belongs here for the same reason the scalar does: it is a component the
+    # FRAMEWORK adds exactly once, by `caps.adds`. `BANNED_IN_PLUGIN_CODE` is
+    # derived from this set, so `code_leaks()` refuses a plugin that names it
+    # without anything else being edited.
+    "price_taxes_profile",
 })


@@ -1019,6 +1102,27 @@ def export_price_eur_kwh(opts: dict) -> float:
    return float(price_option(opts, "export_price_eur_kwh"))


+def taxes_profile(opts: dict):
+    """The configured `price_taxes_profile` as a period table, or None.
+
+    TARIFF-17. Raises `static_tariff.ProfileInvalid` on a malformed table - and
+    ⚠️ THAT EXCEPTION IS NOT MEANT TO REACH A RUNNING SITE. validate.py parses
+    the same option at STARTUP and refuses to start on it, for the reason
+    `static_profile` is refused there: a table that only fails when a fetch
+    happens is a site that stops pricing at 03:00, and §11.4 turns that into a
+    quiet fallback nothing on the status page distinguishes from a healthy
+    fixed-tariff day. `load_prices()` still handles it, loudly, because a guard
+    whose only proof is "the other guard ran first" is not a guard.
+
+    ⚠️ THE IMPORT IS LAZY AND THE CYCLE IS THE REASON. `static_tariff.py`
+    imports this module at module scope; importing it back at module scope here
+    would make which file is imported first decide whether the add-on starts.
+    `sys.modules` makes the repeat cost a dict lookup.
+    """
+    from .static_tariff import parse_taxes_profile
+    return parse_taxes_profile(price_option(opts, "price_taxes_profile"))
+
+
 # --------------------------------------------------------------------------- #
 # The plugin interface
 # --------------------------------------------------------------------------- #
@@ -1286,23 +1390,68 @@ def _validate_raw(points, caps):
        seen = u


+def taxes_at(taxes, instant: datetime) -> float:
+    """The TAXES component at ONE instant. A scalar, or a period table.
+
+    TARIFF-17. THE DEFECT THIS EXISTS TO CLOSE, and it is a MISSING CAPABILITY
+    rather than a wrong constant: `price_taxes_eur_kwh` is additive and
+    identical every hour, so it cancels exactly out of `max - min` and cannot
+    move `min(firm, key=...)`. It is not a distortion - it is provably inert on
+    both quantities the optimiser reads. What was missing is anywhere for an
+    HOUR-VARYING non-energy component to live, and the Walloon and Brussels
+    DSOs bill one: ORES `dag 13,27 / nacht 7,39` c EUR/kWh, a 5,88 c gap whose
+    cheap band coincides with the cheap spot hours. Flattening it does not
+    shift the curve, it UNDERSTATES the spread and declines profitable cycles.
+    See DOCS.md "The three buckets".
+
+    ⚠️ DUCK-TYPED ON `price_at`, NOT ON `isinstance`. price.py must not import
+    static_tariff.py - static_tariff.py imports THIS module, and a module-level
+    cycle would make the import order load-bearing. `taxes_profile()` below is
+    the one place the real parser is reached, and it imports it lazily.
+
+    ⚠️ THE LOOKUP IS ON THE ~30 s PLANNING PATH through `assemble()`, so it
+    stays a linear scan over the two-to-four periods a Belgian tariff has
+    (`StaticProfile.at()`), with no parsing, no allocation and no I/O. A
+    malformed table never reaches here: validate.py refuses it at STARTUP.
+    """
+    at = getattr(taxes, "price_at", None)
+    if at is None:
+        return float(taxes)
+    return float(at(instant))
+
+
 def assemble(caps: ProviderCapabilities, raw, markup: float,
-             taxes: float) -> list:
+             taxes) -> list:
    """RawPoints -> canonical all-in PricePoints. THE ONLY PLACE MARKUP IS ADDED.

    Adds exactly `caps.adds` - the complement of what the plugin declared its
    source already contains. A plugin that publishes an all-in figure gets
    nothing added; a raw EPEX figure gets both.
+
+    ⚠️ `taxes` IS A SCALAR *OR* A PERIOD TABLE (TARIFF-17), AND IT IS EVALUATED
+    AT EACH POINT'S OWN INSTANT. Hoisting the lookup out of the loop - reading
+    it once and adding the same number to every point - is the mutation that
+    collapses the whole feature back into the LEVEL bucket: the assembled
+    series would still differ from the untaxed one by the right MAGNITUDE, and
+    the cheapest hour would be wrong. `test_price.py` section 24 is the check
+    that goes red for it, and it grades WHICH HOUR IS CHEAPEST rather than the
+    spread, because a spread-magnitude assertion passes on the hoisted version.
+
+    ⚠️ THE SCALAR PATH IS UNCHANGED, ARITHMETICALLY AND NOT ONLY IN INTENT.
+    `taxes_at()` on a float returns that float at every instant, and
+    `0.0 + markup` is exactly `markup` in IEEE 754 for every finite markup, so
+    a site on a scalar gets the identical bytes it got before this landed.
    """
-    add = 0.0
-    if Component.MARKUP in caps.adds:
-        add += float(markup)
-    if Component.TAXES in caps.adds:
-        add += float(taxes)
-    return [PricePoint(start=brussels(p.start),
-                       eur_per_kwh=round(p.eur_per_kwh + add, 6),
-                       provisional=bool(p.provisional))
-            for p in raw]
+    add_markup = float(markup) if Component.MARKUP in caps.adds else 0.0
+    wants_taxes = Component.TAXES in caps.adds
+    out = []
+    for p in raw:
+        local = brussels(p.start)
+        add = add_markup + (taxes_at(taxes, local) if wants_taxes else 0.0)
+        out.append(PricePoint(start=local,
+                              eur_per_kwh=round(p.eur_per_kwh + add, 6),
+                              provisional=bool(p.provisional)))
+    return out


 # --------------------------------------------------------------------------- #
@@ -1902,13 +2051,38 @@ async def load_prices(opts: dict, since: datetime, until: datetime,

    caps = cls.capabilities()
    markup = float(price_option(opts, "price_markup_eur_kwh"))
-    taxes = float(price_option(opts, "price_taxes_eur_kwh"))
+
+    # ⚠️ TARIFF-17: THE TABLE WINS OVER THE SCALAR, AND validate.py REFUSES THE
+    # CASE WHERE BOTH SAY SOMETHING. Two writers of one quantity, one of which
+    # silently loses, is the shape validate.py exists to refuse - so the
+    # precedence here is only ever exercised on a configuration that has
+    # already been accepted, and it is spelled out rather than left implicit.
+    taxes_key = "price_taxes_eur_kwh"
+    try:
+        table = taxes_profile(opts)
+    except Exception as e:                                    # noqa: BLE001
+        # Not silent, and not a traceback into the 30 s tick. validate.py
+        # should have refused this at startup; if the add-on is running with it
+        # anyway, the operator is told which key and what is wrong with it.
+        _LOG.error("price_taxes_profile cannot be used (%s: %s), so this fetch "
+                   "has NO tax component to add - it is not falling back to "
+                   "price_taxes_eur_kwh, because a silently different tax "
+                   "basis is the defect this option exists to remove. Fix the "
+                   "table or clear it; validate.py refuses it at startup",
+                   type(e).__name__, e)
+        return PriceRead.no_data(
+            f"price_taxes_profile cannot be used: {e}")
+    if table is not None:
+        taxes = table
+        taxes_key = "price_taxes_profile"
+    else:
+        taxes = float(price_option(opts, "price_taxes_eur_kwh"))

    # ⚠️ Not a refusal, but not silent either. A plugin whose feed is already
    # all-in ignores these two numbers, and an operator who typed them has every
    # reason to believe they took effect.
    ignored = [n for c, n, v in ((Component.MARKUP, "price_markup_eur_kwh", markup),
-                                 (Component.TAXES, "price_taxes_eur_kwh", taxes))
+                                 (Component.TAXES, taxes_key, taxes))
               if c not in caps.adds and v]
    if ignored:
        _LOG.warning("%s publishes a figure that already contains %s, so the "
@@ -422,9 +422,19 @@ def fill_from_yesterday(read: PriceRead, *, yesterday: PriceRead,
    _audit(out, published)
    carried = sum(1 for p in out if _utc_hour(p.start) not in published)
    if carried:
+        # ⚠️ THREE QUANTITIES, THREE NAMES (TARIFF-11). This line read
+        # "%d of %d hours ... ; %d published" with `carried` (a count of
+        # carried HOURS - the fill emits exactly one point per unpublished
+        # hour) over `len(out)` (a count of POINTS, four per hour wherever the
+        # feed printed) and `len(out) - carried` (POINTS again) under the same
+        # noun. On the Belgian quarter-hourly feed that reads "33 of 141
+        # hours" about a 48-hour horizon. The fill's unit is the HOUR and the
+        # feed's is the POINT; nothing derived from one answers for the other.
+        total_h = len({_utc_hour(p.start) for p in out})
        _LOG.info("§8.3: %d of %d hours carried forward from yesterday's "
-                  "profile and flagged provisional; %d published",
-                  carried, len(out), len(out) - carried)
+                  "profile and flagged provisional; the feed published %d "
+                  "points over the other %d hours",
+                  carried, total_h, len(out) - carried, total_h - carried)

    product = read.match(series=lambda r: r.product,
                         no_data=lambda _r: yesterday.product)
@@ -222,6 +222,12 @@ _DAY_ALIASES = {

 MINUTES_PER_DAY = 1440

+# TARIFF-17. The option key whose value is a period table of the TAXES
+# component. One spelling, here, because price.py, validate.py and config.yaml
+# all name it and `provider_id()`'s note says what three spellings of one
+# decision cost.
+TAXES_PROFILE_OPTION = "price_taxes_profile"
+
 # The mean that `cheap_now()` grades against is taken over this many local days.
 # Seven, so each weekday appears exactly once - see the module docstring. It is
 # a MODULE CONSTANT and not an option on purpose: CFG-03 already tracks three
@@ -320,13 +326,37 @@ def _days(value, field: str) -> frozenset:
    return frozenset(out)


-def _price(value, field: str) -> float:
-    """The all-in EUR/kWh for a period, bounded exactly as price.py bounds a feed."""
+# What a period's `eur_per_kwh` MEANS, per option. The grammar is one grammar
+# (TARIFF-17); the quantity it carries is not, so the "you left this out"
+# sentence is the one thing the two tables do not share.
+_PERIOD_MEANS = {
+    "static_profile":
+        "an all-in eur_per_kwh (energy + supplier markup + taxes, §9.3) - the "
+        "same basis the dynamic providers are assembled onto, so the two are "
+        "comparable",
+}
+_TAXES_MEANS = (
+    "the TAXES component alone in eur_per_kwh - the non-energy part of the "
+    "bill for that band (distribution, levies, VAT), NOT an all-in price. The "
+    "framework adds it to what the feed publishes, exactly as the scalar "
+    "price_taxes_eur_kwh is added"
+)
+_PERIOD_MEANS[TAXES_PROFILE_OPTION] = _TAXES_MEANS
+
+
+def _price(value, field: str, means: str = None) -> float:
+    """One period's EUR/kWh, bounded exactly as price.py bounds a feed.
+
+    `means` names the quantity for the error sentence only. TARIFF-17: the same
+    grammar carries an ALL-IN price under `static_profile` and a TAXES-ONLY
+    component under `price_taxes_profile`, and an operator who confuses the two
+    is out by an energy price - so the refusal says which one is wanted.
+    """
+    if means is None:
+        means = _PERIOD_MEANS["static_profile"]
    if value is None:
        raise ProfileInvalid(
-            f"{field} is missing. Every period needs an all-in eur_per_kwh "
-            f"(energy + supplier markup + taxes, §9.3) - the same basis the "
-            f"dynamic providers are assembled onto, so the two are comparable.")
+            f"{field} is missing. Every period needs {means}.")
    if isinstance(value, bool) or not isinstance(value, (int, float, str)):
        raise ProfileInvalid(f"{field} is {value!r}, which is not a number")
    try:
@@ -383,14 +413,19 @@ class Period:
 class StaticProfile:
    """A validated two-or-more-period tariff. Immutable, pure, I/O-free."""

-    def __init__(self, periods):
+    def __init__(self, periods, *, option: str = "static_profile"):
        self.periods = tuple(periods)
+        # ⚠️ TARIFF-17: the OPTION NAME travels with the profile so that every
+        # refusal names the key the operator actually typed. It is a default
+        # argument on purpose - every pre-existing call site and every
+        # pre-existing sentence is byte-identical without it.
+        self.option = option
        if not self.periods:
            raise ProfileInvalid(
-                "static_profile has no periods. A profile with no periods is "
-                "not a fixed tariff, it is an absent one - leave the option "
-                "empty to say that on purpose (§11.4 then applies).")
-        _check_tiling(self.periods)
+                f"{option} has no periods. A profile with no periods is "
+                f"not a fixed tariff, it is an absent one - leave the option "
+                f"empty to say that on purpose (§11.4 then applies).")
+        _check_tiling(self.periods, option=option)

    # -- what kind of tariff this is, DERIVED --------------------------------
    @property
@@ -477,7 +512,7 @@ class StaticProfile:
            u += timedelta(hours=1)
        if not out:
            raise ProfileInvalid(
-                f"static_profile.series({since.isoformat()}, "
+                f"{self.option}.series({since.isoformat()}, "
                f"{until.isoformat()}) spans no whole hour. An empty series is "
                f"not constructible downstream on purpose (price.py trap 3).")
        return out
@@ -489,7 +524,7 @@ class StaticProfile:
        return f"{kind}: " + "; ".join(p.words for p in self.periods)


-def _check_tiling(periods) -> None:
+def _check_tiling(periods, *, option: str = "static_profile") -> None:
    """Every day type must be covered by EXACTLY ONE period, every minute.

    ⚠️ REFUSES BOTH DIRECTIONS. A gap means an hour with no price, and the only
@@ -506,22 +541,22 @@ def _check_tiling(periods) -> None:
            if n > 1 and over_from is None:
                over_from = (minute, n)
            if n != 0 and gap_from is not None:
-                _raise_gap(weekday, gap_from, minute)
+                _raise_gap(weekday, gap_from, minute, option)
            if n <= 1 and over_from is not None:
-                _raise_overlap(weekday, over_from, minute, periods)
+                _raise_overlap(weekday, over_from, minute, periods, option)
        if gap_from is not None:
-            _raise_gap(weekday, gap_from, MINUTES_PER_DAY)
+            _raise_gap(weekday, gap_from, MINUTES_PER_DAY, option)
        if over_from is not None:
-            _raise_overlap(weekday, over_from, MINUTES_PER_DAY, periods)
+            _raise_overlap(weekday, over_from, MINUTES_PER_DAY, periods, option)


 def _hhmm(m):
    return f"{m // 60:02d}:{m % 60:02d}"


-def _raise_gap(weekday, start, end):
+def _raise_gap(weekday, start, end, option="static_profile"):
    raise ProfileInvalid(
-        f"static_profile leaves {DAY_NAMES[weekday]} "
+        f"{option} leaves {DAY_NAMES[weekday]} "
        f"{_hhmm(start)}-{_hhmm(end)} with no period, so those hours have no "
        f"price. Refused rather than defaulted: an invented price is one an "
        f"optimiser would trade on, and §11.4 already says what a missing price "
@@ -529,19 +564,28 @@ def _raise_gap(weekday, start, end):
        f"\"22:00-07:00 mon-fri\" does NOT cover Saturday morning.")


-def _raise_overlap(weekday, over, end, periods):
+def _raise_overlap(weekday, over, end, periods, option="static_profile"):
    start, n = over
    names = [p.name for p in periods if p.covers(weekday, start)]
    raise ProfileInvalid(
-        f"static_profile gives {DAY_NAMES[weekday]} {_hhmm(start)}-"
+        f"{option} gives {DAY_NAMES[weekday]} {_hhmm(start)}-"
        f"{_hhmm(end)} {n} prices at once ({', '.join(names)}). Two prices for "
        f"one hour means one of them silently wins on list order. Narrow one of "
        f"the windows or split the day selector.")


-def parse_static_profile(value):
+def parse_static_profile(value, *, option: str = "static_profile",
+                         means: str = None):
    """`static_profile` -> a `StaticProfile`, or None when unset.

+    ⚠️ TARIFF-17 MADE `option`/`means` PARAMETERS RATHER THAN FORKING THIS
+    FUNCTION, and that is the whole of the reuse. A second period parser would
+    be a second tiling rule, a second day-type rule and a second set of DST
+    bugs, diverging first on the 23- and 25-hour days where nobody looks. The
+    two arguments move only the OPTION NAME and the "what this number is"
+    clause through the refusals; the grammar, the tiling check and the wrapping
+    rule are one implementation with one set of checks over it.
+
    Accepts what the option can actually arrive as:
      * `None` / `""` / `"null"`      - unset. §14 ships `static_profile: null`.
      * a JSON string                 - what config.yaml's flat `str?` option
@@ -555,6 +599,8 @@ def parse_static_profile(value):
    """
    if value is None:
        return None
+    if means is None:
+        means = _PERIOD_MEANS.get(option, _PERIOD_MEANS["static_profile"])
    if isinstance(value, str):
        text = value.strip()
        if not text or text.lower() in ("null", "none", "off"):
@@ -563,7 +609,7 @@ def parse_static_profile(value):
            value = json.loads(text)
        except ValueError as e:
            raise ProfileInvalid(
-                f"static_profile is not valid JSON ({e}). It is a JSON object "
+                f"{option} is not valid JSON ({e}). It is a JSON object "
                f"with a \"periods\" list, on one line, e.g.\n"
                f'  {{"periods": [{{"name":"day","from":"07:00","to":"22:00",'
                f'"days":"mon-fri","eur_per_kwh":0.34}}, ...]}}\n'
@@ -573,7 +619,7 @@ def parse_static_profile(value):
        tz = str(value.get("timezone", "") or "").strip().lower()
        if tz not in SUPPORTED_TZ:
            raise ProfileInvalid(
-                f"static_profile.timezone is {value.get('timezone')!r}. Only "
+                f"{option}.timezone is {value.get('timezone')!r}. Only "
                f"Europe/Brussels is supported: the shipped image carries no tz "
                f"database (see app/price.py), so any other zone could not be "
                f"honoured and would be silently treated as Brussels - which is "
@@ -581,24 +627,24 @@ def parse_static_profile(value):
        rows = value.get("periods")
        if rows is None:
            raise ProfileInvalid(
-                "static_profile has no \"periods\" list. Even a fully-fixed "
-                "tariff is written as one period covering 00:00-24:00 all days "
-                "- one shape for both products, so nothing downstream branches "
-                "on which kind of site this is.")
+                f"{option} has no \"periods\" list. Even a fully-fixed "
+                f"tariff is written as one period covering 00:00-24:00 all days "
+                f"- one shape for both products, so nothing downstream branches "
+                f"on which kind of site this is.")
    else:
        rows = value

    if not isinstance(rows, (list, tuple)):
        raise ProfileInvalid(
-            f"static_profile.periods is {type(rows).__name__}, not a list")
+            f"{option}.periods is {type(rows).__name__}, not a list")

    periods = []
    for i, row in enumerate(rows, start=1):
        if not isinstance(row, dict):
            raise ProfileInvalid(
-                f"static_profile.periods[{i}] is {type(row).__name__}, not an "
+                f"{option}.periods[{i}] is {type(row).__name__}, not an "
                f"object with from/to/days/eur_per_kwh")
-        where = f"static_profile.periods[{i}]"
+        where = f"{option}.periods[{i}]"
        name = str(row.get("name", "") or f"period{i}").strip() or f"period{i}"
        start = _minutes(row.get("from", row.get("start")), f"{where}.from")
        end = _minutes(row.get("to", row.get("end")), f"{where}.to")
@@ -617,8 +663,47 @@ def parse_static_profile(value):
                              end_min=end,
                              days=_days(row.get("days"), f"{where}.days"),
                              eur_per_kwh=_price(row.get("eur_per_kwh"),
-                                                 f"{where}.eur_per_kwh")))
-    return StaticProfile(periods)
+                                                 f"{where}.eur_per_kwh",
+                                                 means)))
+    return StaticProfile(periods, option=option)
+
+
+def parse_taxes_profile(value):
+    """`price_taxes_profile` -> a `StaticProfile` of TAX values, or None.
+
+    TARIFF-17. THE DEFECT THIS EXISTS TO CLOSE: `price.py` modelled the whole
+    non-energy part of a Belgian bill as ONE scalar. In Flanders that is
+    correct - Fluvius distribution is a single rate and its tariff card offers
+    only `Normaal | Uitsl. nacht`, where *exclusive night* is a separate
+    physical circuit rather than a night register. The Walloon and Brussels
+    DSOs are on the same card with four columns - `Enkelvoudig | Dag | Nacht |
+    Uitsl. nacht` - and the day/night gap is real money:
+
+        ORES          dag 13,27  nacht  7,39  ->  5,88 c EUR/kWh
+        AIESH         dag 15,17  nacht  8,21  ->  6,96
+        Tecteo RESA   dag 12,20  nacht  7,01  ->  5,19
+        Sibelga (BXL) dag  9,39  nacht  7,10  ->  2,29
+        ORES IMPACT   dag 16,578 nacht  5,090 -> 11,49   (2026)
+
+    ⚠️ AND THE BANDS ARE ANTI-CORRELATED WITH WHAT THE BATTERY WANTS TO DO.
+    The cheap network hours are the cheap spot hours, so flattening them does
+    not merely shift the curve - it SYSTEMATICALLY UNDERSTATES the true spread
+    and makes the add-on decline cycles that are genuinely profitable. See
+    DOCS.md "The three buckets" for why the flat scalar could never have done
+    this: an additive constant, identical every hour, cancels exactly in
+    `max - min` and cannot move `min(firm, key=...)` either.
+
+    ⚠️ THE VALUE IS THE TAXES COMPONENT, NOT AN ALL-IN PRICE. `static_profile`
+    uses the same grammar for an all-in figure; the two are one parser and two
+    meanings, and `_price()`'s refusal names which one it wanted.
+
+    ⚠️ NOT PARSED ON THE FETCH PATH. validate.py refuses a malformed table at
+    STARTUP, by the rule `price.py` trap 3 states for `static_profile`: a table
+    that cannot be parsed at 03:00 is a site that stops pricing at 03:00, and
+    §11.4 makes that quiet.
+    """
+    return parse_static_profile(value, option=TAXES_PROFILE_OPTION,
+                                means=_TAXES_MEANS)


 # --------------------------------------------------------------------------- #
@@ -771,6 +856,63 @@ class TariffPlan:
            series=lambda r: any(p.provisional for p in r.points),
            no_data=lambda _r: True)

+    # -- the plan's SHAPE, in the two units it actually has (TARIFF-11) ------
+    # ⚠️ POINTS AND HOURS ARE TWO NUMBERS AND THIS PLAN HAD ONLY EVER
+    # REPORTED ONE OF THEM, UNDER THE OTHER'S NAME. `words` read
+    # `f"... {len(self.read.points)} h"`, which counts POINTS: on the
+    # quarter-hourly Belgian feed (15-minute MTU, 2025-10-01) a 33-hour plan
+    # logged `dynamic_dayahead from generic_dayahead, 132 h`. It is the same
+    # conflation TARIFF-14 removed from `at()` and FCST-04 removed from the
+    # *Price history* row, left standing in the prose. ⚠️ AND THE ERROR IS
+    # NOT A FLAT 4x: a 40 h soak measured 1.79x .. 5.33x, because §8.3's
+    # carried points are HOURLY while the firm ones are quarter-hourly, so
+    # the ratio moves with the firm/carried mix as the day goes on. Nothing
+    # derived from ONE of these numbers can answer for the other.
+
+    @property
+    def n_points(self) -> int:
+        """How many points the series carries. A `no_data` read carries none."""
+        return self.read.match(series=lambda r: len(r.points),
+                               no_data=lambda _r: 0)
+
+    @property
+    def hours(self) -> int:
+        """How many distinct WHOLE CLOCK HOURS those points touch.
+
+        Same rule as `price_history._held()`, deliberately - the *Tariff* and
+        *Price history* rows describe the same feed and an operator reading
+        `132 points over 33 h` beside `96 points over 24 h` must be able to
+        compare them. A point is attributed to the UTC hour its own start
+        falls in; hours the feed never printed are simply not in the set, so
+        this counts what is PRICED rather than what was asked for.
+        """
+        return self.read.match(series=lambda r: _whole_hours(r.points),
+                               no_data=lambda _r: 0)
+
+    @property
+    def n_firm(self) -> int:
+        """Points carrying a published price for their own interval (§8.3)."""
+        return len(self.firm_points())
+
+    @property
+    def n_carried(self) -> int:
+        """Points filled from yesterday's profile, or from §11.4's fallback."""
+        return self.n_points - self.n_firm
+
+    @property
+    def spacings_s(self) -> tuple:
+        """The distinct gaps between consecutive points, ascending, in seconds.
+
+        ⚠️ MIXED IS THE NORMAL STEADY STATE, NOT AN EDGE CASE. FCST-04's
+        carry-forward emits HOURLY carried points beside QUARTER-HOURLY firm
+        ones and the soak measured `[900, 3600]` in 70 % of samples - so a
+        surface reporting one global spacing would be wrong about the usual
+        case. `price._cover_table()` is where that rule is enforced; this
+        only reports it.
+        """
+        return self.read.match(
+            series=lambda r: _spacings(r.points), no_data=lambda _r: ())
+
    def price_at(self, instant: datetime) -> float:
        """EUR/kWh now. Raises `Absence` when there is no price - never 0.0."""
        return self.read.match(
@@ -926,20 +1068,30 @@ class TariffPlan:
        pts = self.read.points
        firm = tuple(p for p in pts if not p.provisional)
        if len(firm) < 2:
+            # ⚠️ POINTS, AND THE HOUR FIGURE BESIDE IT RATHER THAN INSTEAD OF
+            # IT (TARIFF-11). This sentence read "only 1 of 96 hours carry a
+            # published price" about 96 quarter-hourly points, which are 24
+            # hours - the point<->hour conflation TARIFF-14 removed from
+            # `at()`, still standing here, and this one reaches an OPERATOR
+            # through main.py's *Arbitrage* row and not only the log.
            return Arbitrage.refuse(
-                f"§8.3: only {len(firm)} of {len(pts)} hours carry a published "
-                f"price - the rest are provisional (origin {self.origin!r}), "
-                f"and no irreversible action may be taken on a provisional "
-                f"price. A buy hour and a sell hour must BOTH be firm before a "
-                f"cycle can be committed. Load shifting, self-consumption and "
-                f"peak shaving continue")
+                f"§8.3: only {len(firm)} of {len(pts)} points carry a "
+                f"published price - {_whole_hours(firm)} of "
+                f"{_whole_hours(pts)} hours - and the rest are provisional "
+                f"(origin {self.origin!r}), so no irreversible action may be "
+                f"taken on them. A buy interval and a sell interval must BOTH "
+                f"be firm before a cycle can be committed. Load shifting, "
+                f"self-consumption and peak shaving continue")

        spread = round(max(p.eur_per_kwh for p in firm)
                       - min(p.eur_per_kwh for p in firm), 6)
        if spread == 0.0:
+            # ⚠️ POINTS AND HOURS, SEPARATELY, for the §8.3 rung's reason -
+            # this sentence counted points and called them "firm hours" too.
            return Arbitrage.refuse(
-                f"the tariff is flat - every one of the {len(firm)} firm hours "
-                f"costs {firm[0].eur_per_kwh:.4f} EUR/kWh, so buying low and "
+                f"the tariff is flat - every one of the {len(firm)} firm "
+                f"points, spanning {_whole_hours(firm)} hours, costs "
+                f"{firm[0].eur_per_kwh:.4f} EUR/kWh, so buying low and "
                f"selling high is arithmetically impossible. §9.2: a fully "
                f"fixed product is self-consumption only")

@@ -969,15 +1121,77 @@ class TariffPlan:

    @property
    def words(self) -> str:
+        """The plan's whole shape in one sentence - LOG *AND* STATUS PAGE.
+
+        ⚠️ THIS STRING IS OPERATOR-FACING SINCE TARIFF-11, which is a reason
+        for its wording to matter MORE rather than less. It used to reach only
+        `_LOG.info("tariff refreshed: %s")`; main.py's *Tariff* row now carries
+        it, age-stamped, so every number in it is read by somebody who cannot
+        see the object.
+
+        ⚠️ EVERY QUANTITY IS NAMED IN ITS OWN UNIT. `{n} points over {h} h` is
+        FCST-04's *Price history* wording on purpose - the two rows describe
+        the same feed and have to be comparable - and the firm/carried split
+        and the spacing are here because they were the two facts the soak
+        found an operator could not learn at all: the plan was `provisional`
+        for 76 % of a 40-hour soak and mixed 900/3600 s for 70 %, and no HTTP
+        surface said either.
+        """
        if not self.has_prices:
            return f"no tariff - {self.read.reason}"
        tag = {"provider": self.read.provider, "static": "static_profile",
               "fallback": "static_profile (feed down)"}.get(self.origin,
                                                             self.origin)
-        return (f"{self.product.value} from {tag}, {len(self.read.points)} h"
+        gaps = self.spacings_s
+        return (f"{self.product.value} from {tag}, "
+                f"{self.n_points} points over {self.hours} h, "
+                f"{self.n_firm} firm / {self.n_carried} carried"
+                + (f", {'+'.join(str(g) for g in gaps)} s spacing"
+                   if gaps else "")
                + (", provisional" if self.provisional else ""))


+def _whole_hours(points) -> int:
+    """How many distinct whole CLOCK HOURS a point list touches. Never raises.
+
+    THE DEFECT THIS PREVENTS (TARIFF-11). Three sentences in this module
+    reported `len(points)` under the name "hours": `TariffPlan.words`, §8.3's
+    firm-pair refusal and the flat-tariff refusal. On the hourly series that
+    was the only resolution any fixture carried before TARIFF-08 the two
+    numbers are identical, which is why it shipped; on the Belgian
+    quarter-hourly feed (15-minute MTU, 2025-10-01) `words` read
+    `dynamic_dayahead from generic_dayahead, 132 h` for 33 hours and the
+    refusal read `only 1 of 96 hours` for 24.
+
+    ⚠️ IT IS NOT `n / 4`, AND A CONSTANT FACTOR IS THE WRONG FIX. §8.3's
+    carry-forward emits ONE HOURLY point per unpublished hour beside the
+    feed's four-per-hour firm ones, so the measured overstatement over a
+    40-hour soak ranged 1.79x .. 5.33x as the mix moved. The hour count has
+    to be COUNTED.
+
+    ⚠️ IT COUNTS PRICED HOURS, NOT THE HORIZON. FCST-04 leaves an hour out
+    of the series when neither the feed nor yesterday can price it, so this
+    is at most the horizon and is smaller whenever the plan has holes - which
+    is the honest direction for a figure an operator reads as "how far ahead
+    do I have prices".
+    """
+    return len({p.start.astimezone(timezone.utc)
+                .replace(minute=0, second=0, microsecond=0) for p in points})
+
+
+def _spacings(points) -> tuple:
+    """Distinct gaps between consecutive points, ascending, in whole seconds.
+
+    Sorted by START, not by list order: `price._cover_table()` establishes
+    that order for `at()` rather than assuming it, and a surface that reported
+    the gaps of an unsorted list would print negative spacings about a series
+    that answers correctly.
+    """
+    starts = sorted(p.start.astimezone(timezone.utc) for p in points)
+    return tuple(sorted({int((b - a).total_seconds())
+                         for a, b in zip(starts, starts[1:])}))
+
+
 def _absent(reason):
    raise Absence(
        f"this plan observed no prices ({reason}). A number invented here is "
@@ -132,6 +132,18 @@ OBSERVED = "observed"          # the store answered and there is a peak
 NO_RECORD = "no_record"        # the store answered and this month has none yet
 NOT_OBSERVED = "not_observed"  # the store did not answer. NOT a zero peak.

+# TARIFF-13. What the COVERAGE figure reads when the store cannot count.
+#
+# ⚠️ NOT 0, AND NOT `None`. This is the reading-state argument of TARIFF-01
+# applied to the number printed BESIDE the peak rather than to the peak. A
+# coverage figure of 0 says "this month has been measured over no quarters at
+# all", which is the strongest possible claim that the peak next to it means
+# nothing - and `f"{None} quarter(s) banked"` renders "None quarter(s) banked",
+# which an operator reads as that same zero. The one honest answer to "how many
+# quarters have I banked" when the table will not answer is that it is not
+# known, and it has to SAY so in the sentence the operator reads.
+COUNT_UNREADABLE = "an unreadable number of"
+

 # --------------------------------------------------------------------------- #
 # local time, without a hard dependency on the tz database
@@ -388,6 +400,23 @@ class PeakStore:
                    "   per_phase_json=excluded.per_phase_json"
                    " WHERE excluded.offtake_avg_w > quarter_blocks.offtake_avg_w",
                    (start, month, w, pp_json))
+                # TARIFF-13. THE TIE RULE, DECIDED RATHER THAN EMERGENT:
+                # at EQUAL wattage the EARLIEST quarter keeps the attribution.
+                # See DECISIONS/TARIFF-13-the-coverage-of-a-peak.md §2.
+                #
+                # `peak_w` itself is still only ever RAISED - the `>` term is
+                # untouched and no tie can move the billed number - so SAFETY-07
+                # reads exactly the watt figure it read before. The second term
+                # moves only the TIMESTAMP the status page attributes it to.
+                #
+                # ⚠️ WITHOUT THE SECOND TERM THE TWO READERS DISAGREE, measured:
+                # `>` alone keeps whichever tied block was WRITTEN FIRST, while
+                # `recompute_month()`'s `ORDER BY offtake_avg_w DESC,
+                # quarter_start ASC` keeps the EARLIEST. Those coincide only
+                # while blocks arrive in time order. Fed four equal 365 W blocks
+                # newest-first, `monthly_peak` answered 09:45 and the recompute
+                # answered 09:00 - a divergence in the derived record part 8 of
+                # test_tariff.py exists to prove cannot happen.
                self._db.execute(
                    "INSERT INTO monthly_peak(month, peak_w, quarter_start, per_phase_json)"
                    " VALUES(?,?,?,?)"
@@ -395,7 +424,9 @@ class PeakStore:
                    "   peak_w=excluded.peak_w,"
                    "   quarter_start=excluded.quarter_start,"
                    "   per_phase_json=excluded.per_phase_json"
-                    " WHERE excluded.peak_w > monthly_peak.peak_w",
+                    " WHERE excluded.peak_w > monthly_peak.peak_w"
+                    "    OR (excluded.peak_w = monthly_peak.peak_w"
+                    "        AND excluded.quarter_start < monthly_peak.quarter_start)",
                    (month, w, start, pp_json))
            return True
        except sqlite3.Error as err:
@@ -449,6 +480,49 @@ class PeakStore:
                           quarter_start=datetime.fromisoformat(row[1]),
                           per_phase_w=pp)

+    def banked_count(self, month: str) -> int | None:
+        """How many quarters this month has banked. `None` when unknowable.
+
+        TARIFF-13. THE DEFECT THIS PREVENTS: the status page printed a coverage
+        figure held in PROCESS MEMORY - `PeakTracker.recorded`, incremented once
+        per block banked by THIS process - beside a peak read from SQLite. The
+        peak outlives a restart and the counter does not, so a driven restart
+        mid-month took a real reading of
+
+            2026-09: peak 365 W ... ; 120 quarter(s) banked
+
+        to the same peak, the same attributed quarter and `0 quarter(s) banked`,
+        on both instances independently. The count is what tells an operator how
+        much of the billing month the number beside it actually covers: 365 W
+        over 120 quarters and 365 W over 0 quarters are different claims about
+        the same watt figure, and after a restart the page made the weaker claim
+        while displaying the stronger one's value. Reading the count from the
+        same durable tier the peak comes from is what makes the two agree.
+
+        ⚠️ `None`, NOT 0, and NOT `len(blocks_in(month))`. `blocks_in()` returns
+        `[]` on a read error - safe there only because no caller reads its
+        emptiness as a peak (§ its own docstring) - so counting its length would
+        rebuild the disarming zero one call further out. This asks the database
+        for a COUNT and refuses to answer when the database refuses.
+
+        ⚠️ Counts `quarter_blocks`, the tier with one row per closed block, and
+        NOT `monthly_peak`, which has one row per MONTH and would answer 1 for
+        every month that has ever been measured. The two tables are proven equal
+        on the PEAK by `recompute_month()`; they were never equal on the COUNT
+        and are not meant to be.
+        """
+        if self._db is None:
+            return None
+        try:
+            row = self._db.execute(
+                "SELECT COUNT(*) FROM quarter_blocks WHERE month=?",
+                (month,)).fetchone()
+        except sqlite3.Error as err:
+            self.last_error = str(err)
+            _LOG.error("could not count quarters for %s (%s)", month, err)
+            return None
+        return int(row[0])
+
    def blocks_in(self, month: str) -> list:
        """(quarter_start, offtake_avg_w) for a month, oldest first. [] on error
        is safe here ONLY because no caller reads emptiness as a peak - AC 3's
@@ -539,11 +613,59 @@ class PeakTracker:
        self.cap_w = float(cap_w)
        self.policy = policy
        self.checkpoint_s = float(checkpoint_s)
-        self.recorded = 0
        self.restore_state = "not attempted"
        self._seen: set = set()
        self._last_ckpt = 0.0

+    # -- coverage -----------------------------------------------------------
+    #
+    # TARIFF-13. `recorded` USED TO BE AN `int` ATTRIBUTE ON THIS OBJECT,
+    # starting at 0 and incremented in `sync()`. It is a property over the store
+    # now, and the three things that changes are all defects it was carrying:
+    #
+    #   * it RESET TO 0 ON EVERY RESTART, beside a peak that did not - see
+    #     `PeakStore.banked_count()` for the driven reading;
+    #   * it was NOT SCOPED TO A MONTH. It counted every block this process had
+    #     banked, so on 1 October the row still read September's tally beside
+    #     October's "no completed quarter recorded yet";
+    #   * it MISSED the block `restore()` banks. A stale block closed from the
+    #     checkpoint goes into `quarter_blocks` and never went through `sync()`,
+    #     so the counter never saw it. Counting the table cannot miss it.
+    #
+    # ⚠️ REMOVING THE COUNTER DOES NOT REMOVE THE DEDUPE. `_seen` is still what
+    # stops `cycle()`'s once-a-second `sync()` re-banking a closed quarter that
+    # `P1Ingest.blocks` keeps for a DAY, and `sync()`'s RETURN value is still
+    # the count of blocks newly banked on that call. What changed is only where
+    # the STATUS PAGE's figure is read from. The check that grades the dedupe
+    # must therefore grade `sync()`'s return, not this property, which now
+    # answers 1 from the database however many times the block was offered.
+
+    def recorded_in(self, when: datetime | None = None):
+        """Quarters banked in `when`'s billing month - `int`, or the sentinel.
+
+        ⚠️ The return type is `int | str` on purpose, and the `str` is
+        `COUNT_UNREADABLE`. A caller that formats this into a sentence gets a
+        true sentence in both cases; a caller that wants to do arithmetic on it
+        gets a TypeError, which is loud. That is the same trade `PeakReading`
+        makes by having no `peak_w_or(default)`.
+        """
+        n = self.store.banked_count(month_key(when or datetime.now(timezone.utc)))
+        return COUNT_UNREADABLE if n is None else n
+
+    @property
+    def recorded(self):
+        """Quarters banked in the month being billed TODAY.
+
+        ⚠️ This is the live status page's reading, where the peak beside it is
+        also read for `datetime.now()`. `checks(when=X)` for an X in another
+        month is a test affordance (TEST-17); the row scoped that way gets this
+        month's count beside that month's peak, which is strictly better than
+        the process-wide counter it replaces but is still a mismatch.
+        `recorded_in(when)` is the scoped form the row should read once
+        `main.py`'s status rows are free to change - TARIFF-11 holds them.
+        """
+        return self.recorded_in()
+
    # -- startup ------------------------------------------------------------
    def restore(self, averager, now: datetime | None = None) -> str:
        """Put the open block back. Returns which of the three cases happened."""
@@ -600,7 +722,6 @@ class PeakTracker:
                continue
            if self.store.record_block(block, self.policy):
                self._seen.add(key)
-                self.recorded += 1
                n += 1
        if n:
            # A block just closed, so the checkpoint's block is gone: clearing it
@@ -330,8 +330,12 @@ from .inverter import roster_entries
 from .maintenance import MAINT_OPTION_DEFAULTS
 from .p1 import is_enabled, validate_meter_options
 from .peakguard import PEAK_OPTION_DEFAULTS
-from .price import PRICE_OPTION_DEFAULTS, PROVIDERS, RETIRED_PROVIDERS
-from .static_tariff import ProfileInvalid, parse_static_profile
+from .price import (
+    PRICE_OPTION_DEFAULTS, PROVIDERS, RETIRED_PROVIDERS,
+    SUPERSEDED_TAXES_DEFAULTS_EUR_KWH)
+from .static_tariff import (
+    ProfileInvalid, TAXES_PROFILE_OPTION, parse_static_profile,
+    parse_taxes_profile)
 from .watchdog import SIGN_OPTION_DEFAULTS

 _LOG = logging.getLogger("goodwe.config")
@@ -1420,6 +1424,101 @@ def _price_problems(opts: dict) -> list[str]:
                "for this product. Peak shaving, reserve management and the "
                "maintenance cycle are unaffected.", profile.prices[0])

+    # ⚠️ TARIFF-17: THE TAXES PERIOD TABLE, PARSED AT STARTUP RATHER THAN AT
+    # 03:00, FOR `static_profile`'s REASON ONE OPTION OVER. This table is read
+    # by `price.assemble()` on the ~30 s planning path; a table that only fails
+    # when a fetch happens is a site that stops pricing mid-afternoon, and
+    # §11.4 turns that into a quiet fallback that looks exactly like a healthy
+    # fixed-tariff day. So the parse happens here, once, where a refusal is a
+    # banner naming the key.
+    raw_taxes_profile = opts.get(TAXES_PROFILE_OPTION, "")
+    taxes_table = None
+    if str(raw_taxes_profile or "").strip() \
+            or isinstance(raw_taxes_profile, (list, dict)):
+        try:
+            taxes_table = parse_taxes_profile(raw_taxes_profile)
+        except ProfileInvalid as e:
+            problems.append(f"{TAXES_PROFILE_OPTION} cannot be used: {e}")
+
+    if taxes_table is not None:
+        # ⚠️ TWO WRITERS OF ONE QUANTITY, ONE OF WHICH SILENTLY LOSES - the
+        # exact case (a) this module exists for, and the same refusal shape as
+        # the price-entity/static_profile pair above. The table decides when it
+        # is set, so a non-default scalar left beside it is a number the
+        # operator typed that changes nothing, on the quantity §11.4 makes
+        # hardest to notice. It is compared against the SHIPPED DEFAULTS rather
+        # than against presence, because the Supervisor writes every schema key
+        # into the options file whether the operator touched it or not - so
+        # "the operator did not type this" has to be read off the VALUE.
+        #
+        # ⚠️ TARIFF-18: "UNTOUCHED" IS A SET, NOT ONE NUMBER, AND THE DEFECT
+        # THAT MAKES IT ONE IS AN UPGRADE THAT STOPS A BATTERY CONTROLLER
+        # STARTING. The Supervisor sets `App.options = deepmerge(config.yaml
+        # defaults, stored options)`, so a saved blob carries every schema key
+        # whether the operator typed it or not - the reference install's export
+        # is 70 of 71. When TARIFF-18 moved this default 0.06 -> 0.11736, every
+        # such blob went from "equal to the shipped default" to "not equal to
+        # it" without anybody editing anything, and a site that also carries a
+        # taxes table would have met `SystemExit(78)` on the upgrade. The
+        # sentence below is about a number the OPERATOR TYPED; a superseded
+        # shipped default is not one, so it still reads as untouched. The set
+        # is in price.py beside the default it supersedes, because the two only
+        # ever move together.
+        scalar = _number(opts, "price_taxes_eur_kwh",
+                         PRICE_OPTION_DEFAULTS["price_taxes_eur_kwh"])
+        shipped = PRICE_OPTION_DEFAULTS["price_taxes_eur_kwh"]
+        untouched = (shipped,) + tuple(SUPERSEDED_TAXES_DEFAULTS_EUR_KWH)
+        superseded = ", ".join(
+            str(u) for u in SUPERSEDED_TAXES_DEFAULTS_EUR_KWH)
+        if scalar is not None \
+                and not any(abs(scalar - u) <= 1e-12 for u in untouched):
+            problems.append(
+                f"{TAXES_PROFILE_OPTION} is set AND price_taxes_eur_kwh is "
+                f"{scalar} rather than its shipped {shipped}. THE TABLE WINS: "
+                f"the add-on reads the per-period figures and never looks at "
+                f"the scalar, so the number you typed there would decide "
+                f"nothing and nothing would say so. Set price_taxes_eur_kwh "
+                f"back to {shipped}, or clear {TAXES_PROFILE_OPTION} to keep "
+                f"the flat figure. (A scalar still sitting on a SUPERSEDED "
+                f"default - {superseded} - is accepted and NOT refused: "
+                f"that is a number this add-on wrote into your options "
+                f"blob, not one you typed.)")
+
+        # ⚠️ THE UNITS RUNG, AND IT IS A SECOND QUANTITY RATHER THAN A
+        # RESTATEMENT. Every Belgian DSO prints these bands in c EUR/kWh
+        # (ORES `13,27`), and the whole table is copied off one card - so the
+        # factor-100 error arrives on EVERY row at once and nothing internal to
+        # the table disagrees with itself. The parser's own +-10 EUR/kWh bound
+        # catches a 13,27 typed raw, but NOT ORES IMPACT's night band of 5,090,
+        # which would be a 5.09 EUR/kWh levy sailing through. Belgian
+        # non-energy components run roughly 0.05-0.25 EUR/kWh, so anything at
+        # or above 1.0 is the wrong unit and not a tariff.
+        steep = sorted({p.eur_per_kwh for p in taxes_table.periods
+                        if abs(p.eur_per_kwh) >= 1.0})
+        if steep:
+            problems.append(
+                f"{TAXES_PROFILE_OPTION} carries {steep} EUR/kWh. Belgian "
+                f"levies and distribution run about 0.05-0.25 EUR/kWh, so "
+                f"these are almost certainly the CENT figures off the tariff "
+                f"card (ORES prints `13,27`, which is 0.1327 EUR/kWh) typed "
+                f"without the conversion - a factor of 100 that would make "
+                f"every hour look like an emergency. Divide by 100, or clear "
+                f"the option.")
+        negative = sorted({p.eur_per_kwh for p in taxes_table.periods
+                           if p.eur_per_kwh < 0})
+        if negative:
+            # ⚠️ A WARNING, NOT A REFUSAL. A negative non-energy component is
+            # implausible rather than impossible - a prosumer rebate is
+            # expressible this way - and refusing a site over it would be this
+            # module asserting a fact about Belgian tariff design it cannot
+            # observe. §14's warning box governs CONTRADICTIONS, and this is
+            # not one.
+            _LOG.warning(
+                "%s carries negative levies %s EUR/kWh. That is accepted, but "
+                "a tax component below zero is usually a sign error: the "
+                "add-on will SUBTRACT it from the published price in those "
+                "hours.", TAXES_PROFILE_OPTION, negative)
+
    # ⚠️ TARIFF-15: THE FORMULA, GRADED AGAINST THE OPERATOR'S OWN CARD, AT
    # STARTUP RATHER THAN AT 03:00.
    #
@@ -291,7 +291,29 @@ options:
  # price_markup_eur_kwh is ignored under it, with a line in the log saying so.
  price_provider: "off"
  price_markup_eur_kwh: 0.03
-  price_taxes_eur_kwh: 0.06
+
+  # TARIFF-18. The all-in Flemish non-energy figure, EUR/kWh, incl. 6 % VAT.
+  # Its components are named in app/price.py's FLEMISH_TAXES_COMPONENTS_EUR_KWH
+  # and test_price.py section 1b re-adds them:
+  #
+  #   Fluvius distribution (Antwerpen)              5,35  c EUR/kWh
+  #   Bijzondere accijns, "Alle verbruik"           4,876
+  #   Bijdrage groene stroom en WKK Vlaanderen      1,51
+  #   Energiebijdrage (0 EUR/MWh since 2026-08-01)  0
+  #                                                ------
+  #                                                11,736 c EUR/kWh = 0.11736
+  #
+  # ⚠️ THIS IS PER-DSO AND YOURS IS PROBABLY DIFFERENT. Only the distribution
+  # row moves: across the eight Fluvius DSOs it runs 5,28 c EUR/kWh
+  # (Midden-Vlaanderen) to 6,70 (West), so the Flemish total runs about 0.117
+  # to 0.131. Antwerpen is near the LOW end, which is the direction this
+  # default should err in - it is inert on which hour is cheapest, but §17's
+  # negative-price guard reads the ABSOLUTE all-in price, and a figure set too
+  # high would carry a genuinely negative hour above zero.
+  #
+  # ⚠️ WALLONIA AND BRUSSELS DO NOT BELONG IN THIS SCALAR AT ALL. Their
+  # distribution tariff has a day and a night band; use price_taxes_profile.
+  price_taxes_eur_kwh: 0.11736

  # §9.3: injection is priced SEPARATELY, and in Belgium it is often near zero -
  # which by itself strongly favours self-consumption over export. A scalar, not
@@ -328,6 +350,43 @@ options:
  # validate.py warns about exactly that.
  static_profile: ""

+  # TARIFF-17. THE TAXES COMPONENT AS A DAY/NIGHT TABLE, for the sites whose
+  # network tariff actually has one. "" means the flat price_taxes_eur_kwh
+  # above decides, which is what every install has had until now and is CORRECT
+  # IN FLANDERS: Fluvius distribution is a single rate, and its row on the
+  # tariff card offers only `Normaal | Uitsl. nacht` - exclusive night being a
+  # separate physical circuit, not the night register of a dual-rate meter.
+  #
+  # The Walloon and Brussels DSOs are on the same card with FOUR columns -
+  # `Enkelvoudig | Dag | Nacht | Uitsl. nacht` - and the gap is real money
+  # (c EUR/kWh): ORES dag 13,27 / nacht 7,39; AIESH 15,17 / 8,21; Tecteo RESA
+  # 12,20 / 7,01; Sibelga 9,39 / 7,10; ORES IMPACT 2026 16,578 / 5,090.
+  #
+  # ⚠️ WHY THIS IS NOT COSMETIC. The optimiser reads the SPREAD (max - min) and
+  # which hour is cheapest. A flat number is additive and identical every hour,
+  # so it cancels out of both - it cannot distort anything, and it also cannot
+  # express this. These bands are ANTI-CORRELATED with what the battery wants
+  # to do (cheap network hours are cheap spot hours), so flattening them
+  # UNDERSTATES the true spread and declines cycles that would have paid. See
+  # DOCS.md, "The three buckets".
+  #
+  # Same JSON grammar as static_profile above - the same tiling rule, the same
+  # day selectors, the same DST handling, because it is literally the same
+  # parser. ⚠️ THE VALUE IS THE TAXES COMPONENT ALONE, NOT AN ALL-IN PRICE:
+  #
+  #   {"periods": [
+  #      {"name":"dag",  "from":"07:00","to":"22:00","days":"mon-fri","eur_per_kwh":0.1327},
+  #      {"name":"nacht","from":"22:00","to":"07:00","days":"mon-fri","eur_per_kwh":0.0739},
+  #      {"name":"nacht","from":"00:00","to":"24:00","days":"sat,sun", "eur_per_kwh":0.0739}]}
+  #
+  # ⚠️ SET THIS *OR* price_taxes_eur_kwh, NOT BOTH. Two writers of one quantity,
+  # one of which silently wins, is refused at startup: leave the scalar at its
+  # shipped default when you fill this in. A scalar still sitting on the
+  # SUPERSEDED 0.06 is accepted too (TARIFF-18 moved that default, and your
+  # stored options carry the old number whether you typed it or not) - the
+  # refusal is about a figure you chose, not about one this add-on wrote.
+  price_taxes_profile: ""
+
  # TARIFF-15. YOUR OWN TARIFF CARD, as two fixed coefficients. Used only when
  # `price_provider: custom_formula`; "" is unset.
  #
@@ -847,6 +906,10 @@ schema:
  # parse_static_profile() accepts an already-parsed dict too, so a future
  # nested schema is a config.yaml change and no code change at all.
  static_profile: str?
+  # TARIFF-17. A JSON string for `static_profile`'s reason, and parsed by
+  # `static_tariff.parse_taxes_profile()` - the SAME period grammar, so a
+  # second tiling rule and a second set of DST bugs do not exist to diverge.
+  price_taxes_profile: str?
  # TARIFF-15. A JSON string for the same reason `static_profile` is one: it is
  # ONE option key, it survives config.yaml's flat options block, and
  # parse_price_formula() accepts an already-parsed dict too, so a future
@@ -527,6 +527,124 @@ check(f"...while THE SAME MAGNITUDES with the sign flipped all DISCHARGE, so "
 # header. Nothing in app/ changed - these rungs were correct all along.


+# --------------------------------------------------------------------------- #
+print()
+print("2c. TARIFF-18 - where the \u00a717 boundary sits in SPOT terms, and the "
+      "shipped default that decides it")
+# ⚠️ WHAT THIS GRADES AND WHAT IT DOES NOT CLAIM. `price_taxes_eur_kwh` is a
+# LEVEL component: it is added identically to every hour, so it cancels exactly
+# in `max - min` and cannot move which hour is cheapest. test_price.py 16b
+# measures that as a FAMILY - five flat scalars spanning and exceeding a real
+# per-DSO range, identical argmin and identical spread to the last digit - and
+# nothing here re-litigates it. Raising the shipped default 0.06 -> 0.11736 is
+# therefore NOT an arbitrage-correctness fix, and this section does not say it
+# is.
+#
+# What it IS: §17's guard is the one rung in this module that reads an
+# ABSOLUTE price rather than a difference, so it is the one decision a level
+# component can reach. The boundary is `spot < -(markup + taxes)`, and moving
+# the taxes default moves it. Below, driven through the shipped `decide()`.
+#
+# ⚠️ AND THE TWO ERROR DIRECTIONS ARE NOT SYMMETRIC, WHICH IS WHY THE DEFAULT
+# SITS AT THE BOTTOM OF THE PER-DSO BAND RATHER THAN IN THE MIDDLE. A taxes
+# figure set too HIGH carries a genuinely negative hour up above zero and the
+# add-on exports into paid-for disposal - §17's own regression case. A figure
+# set too LOW only declines a discharge that would have paid. Where one default
+# must stand in for eight Fluvius DSOs, it belongs at the low end.
+_T18_MARKUP = PRICE_OPTION_DEFAULTS["price_markup_eur_kwh"]
+_T18_TAXES = PRICE_OPTION_DEFAULTS["price_taxes_eur_kwh"]
+_T18_OLD_TAXES = 0.06          # what config.yaml shipped before TARIFF-18
+
+# ⚠️ THE PRECONDITION FIRST (MUTATION.md habit 1). Every comparison below is
+# "the old level and the new level answer differently". If the two levels were
+# ever the same number, all of it would be one figure graded against itself -
+# DEV-02's `(-5000, 5000)` against `(-5000, 5000)`, one card over.
+check(f"the shipped taxes default {_T18_TAXES} and the superseded "
+      f"{_T18_OLD_TAXES} are DIFFERENT numbers, and differ by more than the "
+      f"0.01 EUR/kWh step this fixture's spot series is built on",
+      abs(_T18_TAXES - _T18_OLD_TAXES) > 0.01)
+
+# The §17 boundary, computed HERE from the two option values rather than read
+# off arbitrage.py - habit 2. all-in = spot + markup + taxes, so the guard
+# fires exactly when spot < -(markup + taxes).
+_T18_B_NEW = round(-(_T18_MARKUP + _T18_TAXES), 6)
+_T18_B_OLD = round(-(_T18_MARKUP + _T18_OLD_TAXES), 6)
+_T18_PROBE = round((_T18_B_NEW + _T18_B_OLD) / 2, 6)
+check(f"the guard's spot-price boundary moves {_T18_B_OLD:+.5f} -> "
+      f"{_T18_B_NEW:+.5f} EUR/kWh, and the probe {_T18_PROBE:+.5f} lies "
+      f"STRICTLY BETWEEN them - so one level answers each way and the probe is "
+      f"not on either boundary",
+      _T18_B_NEW < _T18_PROBE < _T18_B_OLD)
+
+# A whole-day-negative spot series whose DEAREST hour is the probe. Same shape
+# as section 2's: the case a guard written "not all prices are negative" lets
+# through, in SPOT rather than all-in terms.
+_T18_SPOT = [round(-0.40 + 0.010 * i, 6) for i in range(24)]
+_T18_SPOT[DEAR_H] = _T18_PROBE
+check(f"the spot day's dearest hour is slot {DEAR_H} at {_T18_PROBE:+.5f} and "
+      f"every other hour is below it, so the hour the guard is asked about is "
+      f"the one the probe was chosen for",
+      _T18_SPOT.index(max(_T18_SPOT)) == DEAR_H
+      and _T18_SPOT.count(max(_T18_SPOT)) == 1
+      and all(p < 0 for p in _T18_SPOT))
+
+
+def _t18_all_in(taxes):
+    """spot + markup + taxes, added here, by this file's own arithmetic."""
+    return [round(p + _T18_MARKUP + taxes, 6) for p in _T18_SPOT]
+
+
+_T18_OLD_SERIES = _t18_all_in(_T18_OLD_TAXES)
+_T18_NEW_SERIES = _t18_all_in(_T18_TAXES)
+print(f"    dearest hour all-in: old level {_T18_OLD_SERIES[DEAR_H]:+.5f}, "
+      f"shipped level {_T18_NEW_SERIES[DEAR_H]:+.5f} EUR/kWh")
+
+# ⚠️ THE LEVEL BUCKET RESTATED ON THIS FIXTURE, BEFORE ANYTHING IS CONCLUDED
+# FROM IT. If the two arms differed in spread or in argmin, the verdicts below
+# could be attributed to that instead, and this section would be claiming an
+# arbitrage effect it must not claim.
+check(f"the two levels leave the SPREAD identical to the last digit "
+      f"({round(max(_T18_OLD_SERIES) - min(_T18_OLD_SERIES), 6)} EUR/kWh) and "
+      f"the cheapest hour in the same slot - so nothing below is an optimiser "
+      f"effect",
+      round(max(_T18_OLD_SERIES) - min(_T18_OLD_SERIES), 6)
+      == round(max(_T18_NEW_SERIES) - min(_T18_NEW_SERIES), 6)
+      and _T18_OLD_SERIES.index(min(_T18_OLD_SERIES))
+      == _T18_NEW_SERIES.index(min(_T18_NEW_SERIES)))
+
+_T18_SELL_OLD = act(plan_of(_T18_OLD_SERIES), DEAR_H, thresh=_shipped,
+                    unc=NO_WEATHER)
+_T18_SELL_NEW = act(plan_of(_T18_NEW_SERIES), DEAR_H, thresh=_shipped,
+                    unc=NO_WEATHER)
+check(f"at the SUPERSEDED 0.06 the same spot hour is "
+      f"{_T18_OLD_SERIES[DEAR_H]:+.5f} all-in, so \u00a717 REFUSES the discharge "
+      f"- and the reason names \u00a717 and that price, not merely that nothing "
+      f"happened",
+      _T18_SELL_OLD.action is None
+      and "§17" in _T18_SELL_OLD.reason
+      and f"{_T18_OLD_SERIES[DEAR_H]:+.4f}" in _T18_SELL_OLD.reason)
+check(f"...and at the SHIPPED {_T18_TAXES} the SAME spot hour is "
+      f"{_T18_NEW_SERIES[DEAR_H]:+.5f} all-in and the battery DISCHARGES. That "
+      f"is the whole of what this card changes in a decision: the operator "
+      f"really does pay those levies, so this hour was never paid-for disposal "
+      f"and the old default was declining a trade that paid",
+      _T18_SELL_NEW.action == DISCHARGE)
+
+# ⚠️ AND THE OTHER SIDE OF THE SHIPPED BOUNDARY, or the pair above grades
+# "bigger taxes discharge more" rather than "the boundary is at -(markup +
+# taxes)". One step below the shipped boundary is still refused.
+_T18_BELOW = list(_T18_SPOT)
+_T18_BELOW[DEAR_H] = round(_T18_B_NEW - 0.001, 6)
+_T18_SELL_BELOW = act(
+    plan_of([round(p + _T18_MARKUP + _T18_TAXES, 6) for p in _T18_BELOW]),
+    DEAR_H, thresh=_shipped, unc=NO_WEATHER)
+check(f"a spot hour at {_T18_BELOW[DEAR_H]:+.5f} - one tenth of a cent BELOW "
+      f"the shipped boundary - is still refused by \u00a717, so the boundary is "
+      f"where -(markup + taxes) puts it and not merely somewhere lower than "
+      f"before",
+      _T18_SELL_BELOW.action is None and "§17" in _T18_SELL_BELOW.reason)
+
+
 # --------------------------------------------------------------------------- #
 print()
 print("3. AC3 - peak shaving outranks arbitrage, through both mechanisms")
@@ -1107,21 +1107,51 @@ _OPT04_KEYS = ["arbitrage_enabled", "cycle_cost_threshold_eur",
 # in config.yaml and nowhere else, which is the arrangement `static_profile`
 # already has for the same reason.
 _T15_KEYS = ["price_formula"]
-check(f"the in-code mirror holds exactly TARIFF-02's, TARIFF-03's, OPT-04's "
-      f"and TARIFF-15's keys - FCST-03 still added none of its own "
+# TARIFF-17 added the sixth, and comes here to say so as the comment above
+# instructs. `price_taxes_profile` is the hour-varying spelling of
+# `price_taxes_eur_kwh` - a period table of the TAXES component, for the Walloon
+# and Brussels DSOs whose distribution tariff really does have a day and a night
+# band (ORES 13,27 / 7,39 c EUR/kWh). It is an ADDITION and not a replacement:
+# the scalar is untouched, every site on it is unaffected, and validate.py
+# refuses the configuration that sets both. It lives in this dict and in
+# config.yaml and nowhere else, which is `static_profile`'s arrangement for
+# `static_profile`'s reason.
+_T17_KEYS = ["price_taxes_profile"]
+check(f"the in-code mirror holds exactly TARIFF-02's, TARIFF-03's, OPT-04's, "
+      f"TARIFF-15's and TARIFF-17's keys - FCST-03 still added none of its own "
      f"{_defaults}",
      _defaults == sorted(["price_provider", "price_markup_eur_kwh",
                           "price_taxes_eur_kwh", "export_price_eur_kwh",
                           "price_csv_path", "price_feed_url",
                           "price_horizon_h", "price_timeout_s",
-                           "static_profile"] + _OPT04_KEYS + _T15_KEYS))
+                           "static_profile"]
+                          + _OPT04_KEYS + _T15_KEYS + _T17_KEYS))
 # ...and the later keys are genuinely NEW, not a rename of something that was
 # already there, or the line above would pass while the mirror silently lost a
 # key.
-check("...and OPT-04's four and TARIFF-15's one are additions rather than "
-      "replacements: the nine TARIFF-02/03 keys are all still present",
+check("...and OPT-04's four, TARIFF-15's one and TARIFF-17's one are additions "
+      "rather than replacements: the nine TARIFF-02/03 keys are all still "
+      "present",
      isinstance(_defaults, list)
-      and len(set(_defaults) - set(_OPT04_KEYS) - set(_T15_KEYS)) == 9)
+      and len(set(_defaults) - set(_OPT04_KEYS) - set(_T15_KEYS)
+              - set(_T17_KEYS)) == 9)
+# ⚠️ AND THE ONE TARIFF-17 IS THE HOUR-VARYING TWIN OF IS STILL THERE, BY NAME.
+# The line above counts nine, and a rename of `price_taxes_eur_kwh` to
+# `price_taxes_profile` would also count nine. The scalar path being unchanged
+# is this card's first acceptance criterion, and a count cannot grade it.
+# ⚠️ THE LITERAL 0.11736 IS TARIFF-18's, AND IT IS TYPED HERE ON PURPOSE. The
+# claim is "the scalar is still its own key, holding its own real number", and
+# reading that number out of the dict under test would compare it against
+# itself. TARIFF-18 raised it from 0.06; if it moves again this line goes red
+# and whoever moved it comes here and says which card.
+check("...and `price_taxes_eur_kwh` is still its own key beside the table, so "
+      "TARIFF-17 widened the framework rather than renaming the scalar - and "
+      "it still holds TARIFF-18's Flemish figure",
+      isinstance(_defaults, list)
+      and "price_taxes_eur_kwh" in _defaults
+      and "price_taxes_profile" in _defaults
+      and _price.PRICE_OPTION_DEFAULTS["price_taxes_eur_kwh"] == 0.11736
+      and _price.PRICE_OPTION_DEFAULTS["price_taxes_profile"] == "")
 check("...and every one of them is still in config.yaml, which stays the "
      "source of truth",
      isinstance(_cfg, str)
@@ -59,6 +59,7 @@ is TEST-15, and it has already turned one live mutation into a false survivor.
 Read MUTATION.md before you report a survivor.
 """

+import ast
 import gzip
 import json
 import sys
@@ -71,8 +72,9 @@ from app.price import (
 )
 from app.price_history import NoHistory
 from app.static_tariff import (
-    MEAN_WINDOW_DAYS, ProfileInvalid, StaticProfile, TariffPlan,
-    parse_static_profile, resolve_tariff, static_plan, static_status,
+    MEAN_WINDOW_DAYS, ProfileInvalid, StaticProfile, TAXES_PROFILE_OPTION,
+    TariffPlan, parse_static_profile, parse_taxes_profile, resolve_tariff,
+    static_plan, static_status,
 )
 from app.validate import validate_startup_config

@@ -87,6 +89,16 @@ def check(name, cond):
        fails.append(name)


+def _reason_of(fn):
+    """The message fn() raised, or "" - so a check can assert WHICH rule
+    refused rather than only that something did (MUTATION.md habit 6)."""
+    try:
+        fn()
+    except Exception as e:                                    # noqa: BLE001
+        return str(e)
+    return ""
+
+
 def raises(fn, exc):
    """True only if fn() raises EXACTLY `exc`. A different exception is False -
    'it was refused' and 'it broke on the way to being refused' must not grade
@@ -1130,6 +1142,189 @@ check("...and the table really does exercise both rungs and the allowing path, "
      {want for _n, _p, want in _TABLE9} == {"flat", "firm-pair", "allowed"})


+
+# --------------------------------------------------------------------------- #
+print()
+print("10. TARIFF-17 - ONE period grammar, not two. A second tiling rule is a "
+      "second set of DST bugs")
+# ⚠️ THE ACCEPTANCE CRITERION THIS GRADES, and why it needs two checks rather
+# than one. `price_taxes_profile` carries the TAXES component as a period table
+# so that a Walloon day/night distribution band can reach the optimiser. The
+# obvious way to build it is a second parser next to this one - and the two
+# would agree on every ordinary day and diverge on the 23- and 25-hour days,
+# where nobody looks and where §11.4 makes the divergence quiet.
+#
+# So the claim is an IDENTITY ("it is this grammar"), and MUTATION.md habit 10
+# says pin an identity structurally and a meaning behaviourally. Both are here:
+#   10a  the grammar family is DEFINED IN EXACTLY ONE MODULE, computed by
+#        parsing every file under app/ rather than by a list somebody typed;
+#   10b  the two options produce the SAME REFUSAL SENTENCES, derived from each
+#        other, which is what a fork would break first.
+
+print()
+print("10a. the grammar is defined in exactly one module under app/, and the "
+      "scope is COMPUTED")
+# ⚠️ A HAND-WRITTEN SCOPE IS THE SAME DEFECT AS A HAND-WRITTEN FIXTURE
+# (habit 12): it passes while the copy sits in the file nobody added to the
+# list. Every `app/*.py` is parsed; the family is taken from THIS module's own
+# top-level names, so it cannot drift from what the grammar actually is.
+#
+# ⚠️ AND THE FAMILY LIST HAS ONE DELIBERATE OMISSION, STATED HERE RATHER THAN
+# ROUNDED OFF (habit 13). `_days` is NOT in it, because `maintenance.py` has a
+# `_days` of its own - a NAMESAKE, not a copy - and the check below would go
+# red on it and be deleted by whoever hit it. The namesake is asserted to BE a
+# namesake, by signature, immediately afterwards, so the omission is graded
+# rather than assumed.
+_T17_FAMILY = ("Period", "StaticProfile", "ProfileInvalid", "_check_tiling",
+               "_raise_gap", "_raise_overlap", "_minutes", "_price",
+               "parse_static_profile", "DAY_NAMES", "MINUTES_PER_DAY",
+               "_DAY_INDEX", "_DAY_ALIASES", "SUPPORTED_TZ")
+
+
+def _t17_defs(path):
+    """Top-level names a module DEFINES - classes, functions and assignments."""
+    tree = ast.parse(path.read_text(encoding="utf-8"))
+    out = set()
+    for node in tree.body:
+        if isinstance(node, (ast.FunctionDef, ast.AsyncFunctionDef,
+                             ast.ClassDef)):
+            out.add(node.name)
+        elif isinstance(node, ast.Assign):
+            out |= {t.id for t in node.targets if isinstance(t, ast.Name)}
+    return out
+
+
+_T17_APP = sorted((HERE / "app").glob("*.py"))
+_T17_WHERE = {name: sorted(p.name for p in _T17_APP if name in _t17_defs(p))
+              for name in _T17_FAMILY}
+for _n, _w in sorted(_T17_WHERE.items()):
+    print(f"    {_n:<22} defined in {_w}")
+check(f"every one of the {len(_T17_FAMILY)} grammar names is defined in "
+      f"EXACTLY ONE of the {len(_T17_APP)} modules under app/ - a copy of "
+      f"`_check_tiling` in price.py would take this red",
+      all(len(w) == 1 for w in _T17_WHERE.values()))
+check("...and that module is static_tariff.py in every case, so the grammar "
+      "did not move house either",
+      {w[0] for w in _T17_WHERE.values() if w} == {"static_tariff.py"})
+check("...and the pin is not vacuous: each of those names really is a "
+      "top-level definition, so the scan found something rather than nothing",
+      all(w for w in _T17_WHERE.values()) and len(_T17_APP) > 5)
+
+
+def _t17_sig(module, name):
+    tree = ast.parse((HERE / "app" / module).read_text(encoding="utf-8"))
+    fn = next(n for n in tree.body
+              if isinstance(n, ast.FunctionDef) and n.name == name)
+    return [a.arg for a in fn.args.args]
+
+
+_T17_DAYS = (_t17_sig("static_tariff.py", "_days"),
+                            _t17_sig("maintenance.py", "_days"))
+print(f"    _days: static_tariff{_T17_DAYS[0]} vs maintenance{_T17_DAYS[1]}")
+check(f"...and the ONE name held out of the family is held out honestly: "
+      f"`maintenance._days{tuple(_T17_DAYS[1])}` renders an age in words and "
+      f"is not a second copy of the grammar's "
+      f"`_days{tuple(_T17_DAYS[0])}` day selector",
+      _T17_DAYS[0] != _T17_DAYS[1] and _T17_DAYS[0] == ["value", "field"]
+      and _T17_DAYS[1] == ["n"])
+# ⚠️ WHAT THIS PIN CANNOT SEE, WITH ITS SHAPE (habit 13). It grades WHERE the
+# grammar is defined, never WHAT it means: `_check_tiling` could be rewritten
+# in place to accept a gap and this would still pass. Section 5 and 10b are
+# what grade the meaning. It also covers `app/` only, and a second grammar
+# living under `tools/` or in a check file is outside it.
+
+_T17_BODY = ast.parse(
+    (HERE / "app" / "static_tariff.py").read_text(encoding="utf-8"))
+_T17_WRAP = next(
+    (n for n in _T17_BODY.body
+     if isinstance(n, ast.FunctionDef) and n.name == "parse_taxes_profile"),
+    None)
+_T17_CALLS = ([ast.unparse(n.func) for n in ast.walk(_T17_WRAP)
+               if isinstance(n, ast.Call)] if _T17_WRAP else [])
+check(f"...and `parse_taxes_profile` is a WRAPPER and not a fork: its whole "
+      f"body calls {_T17_CALLS}, pinned on the AST rather than on the source "
+      f"text, because `\"parse_static_profile\" in src` is true of a copy that "
+      f"merely mentions it",
+      _T17_CALLS == ["parse_static_profile"])
+
+
+print()
+print("10b. and the two options give the SAME refusals - derived from each "
+      "other, not typed twice")
+# ⚠️ EVERY EXPECTED SENTENCE HERE IS THE OTHER OPTION'S OWN SENTENCE with the
+# key substituted. Nothing is transcribed, so a fork that reworded one refusal
+# - or that quietly stopped refusing something - is red on the row it broke and
+# not on all of them.
+_T17_BAD = [
+    ("a gap", {"periods": [{"name": "d", "from": "07:00", "to": "22:00",
+                            "days": "all", "eur_per_kwh": 0.13}]}),
+    ("an overlap", {"periods": [
+        {"name": "a", "from": "00:00", "to": "24:00", "days": "all",
+         "eur_per_kwh": 0.13},
+        {"name": "b", "from": "07:00", "to": "22:00", "days": "all",
+         "eur_per_kwh": 0.07}]}),
+    ("a bad HH:MM", {"periods": [{"name": "d", "from": "7.5", "to": "22:00",
+                                  "days": "all", "eur_per_kwh": 0.13}]}),
+    ("a bad day", {"periods": [{"name": "d", "from": "00:00", "to": "24:00",
+                                "days": "funday", "eur_per_kwh": 0.13}]}),
+    ("missing days", {"periods": [{"name": "d", "from": "00:00", "to": "24:00",
+                                   "eur_per_kwh": 0.13}]}),
+    ("a zero-length window", {"periods": [
+        {"name": "d", "from": "07:00", "to": "07:00", "days": "all",
+         "eur_per_kwh": 0.13}]}),
+    ("no periods list", {"timezone": "europe/brussels"}),
+    ("an empty periods list", {"periods": []}),
+    ("a foreign timezone", {"timezone": "utc", "periods": []}),
+    ("periods that are not a list", {"periods": 3}),
+    ("a row that is not an object", {"periods": ["dag"]}),
+    ("invalid JSON", "{not json"),
+    ("a 24:00 start", {"periods": [{"name": "d", "from": "24:00", "to": "07:00",
+                                    "days": "all", "eur_per_kwh": 0.13}]}),
+]
+_T17_ROWS = []
+for _what, _bad in _T17_BAD:
+    _a = _reason_of(lambda: parse_static_profile(_bad))
+    _b = _reason_of(lambda: parse_taxes_profile(_bad))
+    _T17_ROWS.append((_what, _a, _b,
+                      _a.replace("static_profile", TAXES_PROFILE_OPTION) == _b))
+for _what, _a, _b, _same in _T17_ROWS:
+    print(f"    {'ok ' if _same else 'XX '}{_what:<28} {_b[:74]}")
+check(f"all {len(_T17_ROWS)} malformations are refused IDENTICALLY under both "
+      f"options, sentence for sentence, once the key name is substituted - "
+      f"which is what one parser means and a fork could not hold",
+      all(row[3] for row in _T17_ROWS))
+check("...and every one of them really did refuse, or 'the two agree' would be "
+      "two empty strings agreeing",
+      all(row[1] and row[2] for row in _T17_ROWS))
+check("...and the sentences are not all the same sentence, or the row above "
+      "would be one comparison repeated 13 times",
+      len({row[2] for row in _T17_ROWS}) == len(_T17_ROWS))
+
+# ⚠️ THE ONE REFUSAL THAT IS DELIBERATELY DIFFERENT, and it is different
+# because the two options carry different QUANTITIES in the same grammar. A
+# period without `eur_per_kwh` gets a sentence naming what was wanted, and an
+# operator who typed an ALL-IN price into the taxes table is out by an energy
+# price with nothing reporting it.
+_T17_NOPRICE = {"periods": [{"name": "d", "from": "00:00", "to": "24:00",
+                             "days": "all"}]}
+_T17_M_S = _reason_of(lambda: parse_static_profile(_T17_NOPRICE))
+_T17_M_T = _reason_of(lambda: parse_taxes_profile(_T17_NOPRICE))
+print(f"    static_profile : {_T17_M_S[-96:]}")
+print(f"    taxes table    : {_T17_M_T[-96:]}")
+check("the 'you left the number out' refusal is the one sentence the two do "
+      "NOT share, and each names its own quantity: an all-in price for "
+      "static_profile, the taxes component alone for the table",
+      "an all-in eur_per_kwh" in _T17_M_S
+      and "an all-in eur_per_kwh" not in _T17_M_T
+      and "TAXES component alone" in _T17_M_T
+      and "NOT an all-in price" in _T17_M_T
+      and _T17_M_S.replace("static_profile", TAXES_PROFILE_OPTION) != _T17_M_T)
+check("...and both still name the ROW the operator has to go and fix, which is "
+      "the half they do share",
+      "periods[1].eur_per_kwh is missing" in _T17_M_S
+      and "periods[1].eur_per_kwh is missing" in _T17_M_T)
+
+
 # --------------------------------------------------------------------------- #
 print()
 if fails:
@@ -2,8 +2,8 @@

    python3 test_tariff.py

-Ten parts. What each is for, and - where it matters - what it is deliberately
-NOT allowed to be tested at:
+Twelve parts. What each is for, and - where it matters - what it is
+deliberately NOT allowed to be tested at:

  1. THE BLOCK ARITHMETIC, against a worked example written out segment by
     segment. The fixture is chosen to be non-degenerate on three axes at once:
@@ -33,6 +33,17 @@ NOT allowed to be tested at:
     proven equal to the tier it derives from, and proven never to be lowered.
  9. AC 3, ON THE REPLAY DATA THAT ACTUALLY EXISTS. See the honesty note below.
 10. THE WIRING, through the real `Controller` and its real status page.
+ 11. TARIFF-13: THE COVERAGE FIGURE PRINTED BESIDE THE PEAK, across a REAL
+     restart - a second `Controller` against the same file. The peak was
+     always durable; the count of banked quarters was an `int` on the
+     tracker and reset to 0, so the page asserted "0 quarter(s) banked"
+     for a month it had measured 120 of. An unreadable store must not
+     produce a coverage figure of 0 either - part 5's argument, one
+     column over.
+ 12. TARIFF-13: WHICH QUARTER A TIED PEAK IS ATTRIBUTED TO, decided
+     (earliest wins) rather than left emergent, and pinned on BOTH
+     readers with a newest-first fixture - ascending arrival cannot tell
+     "the earliest quarter" from "the first row written".

 ------------------------------------------------------------------------------
 ⚠️ PART 9 IS A TWO-DAY MEASUREMENT AND SAYS SO. THE 30-DAY ANSWER IS ELSEWHERE
@@ -106,9 +117,9 @@ from pathlib import Path
 from app.main import Controller
 from app.p1 import P1Ingest, QuarterAverager, QUARTER_S, make_sample, split_signed
 from app.tariff import (
-    BILLING_TZ, CHECKPOINT_S, NO_RECORD, NOT_OBSERVED, POLICY_MAX,
-    POLICY_NET, POLICY_SUM, PeakStore, PeakTracker, _EUTimezone, billed_w,
-    month_key,
+    BILLING_TZ, CHECKPOINT_S, COUNT_UNREADABLE, NO_RECORD, NOT_OBSERVED,
+    POLICY_MAX, POLICY_NET, POLICY_SUM, PeakStore, PeakTracker, _ClosedBlock,
+    _EUTimezone, billed_w, month_key,
 )

 fails = []
@@ -932,18 +943,28 @@ check("the closed quarter reached SQLite through the tracker the cycle calls",

 # ⚠️ `cycle()` calls sync() ONCE A SECOND against a `blocks` list that keeps a
 # closed quarter for a DAY. Without a dedupe that is ~86 000 re-banks of the
-# same row per block, and `recorded` - the number the status page prints as
-# "quarters banked" - would be a count of loop iterations rather than of
-# quarters. The database stays correct either way, which is exactly why this
-# needs its own check instead of being caught by the peak.
+# same row per block, and a coverage figure derived from the number of times a
+# block was OFFERED would be a count of loop iterations rather than of quarters.
+# The database stays correct either way, which is exactly why this needs its own
+# check instead of being caught by the peak.
+#
+# ⚠️ GRADED ON `sync()`'s RETURN, and on the STORE's tally for the month the
+# quarter is in - TARIFF-13. It used to be graded on `PeakTracker.recorded`,
+# which was then an `int` incremented inside this very loop, so the dedupe and
+# the figure that reported it were the same variable. They are not any more:
+# `recorded_in()` counts rows in `quarter_blocks`, where re-banking the same
+# `quarter_start` is a PRIMARY KEY no-op and could never have shown up as a
+# second quarter. A check written against it alone would now pass however many
+# times sync() re-banked, which is why the return value is the load-bearing
+# half of this assertion and is asserted first.
 again = c.peak.sync(c.p1)
 third = c.peak.sync(c.p1)
 print(f"    sync() called three times over the same closed quarter: "
-      f"{n}, {again}, {third} newly banked; tracker reports "
-      f"{c.peak.recorded} quarter(s)")
+      f"{n}, {again}, {third} newly banked; the store holds "
+      f"{c.peak.recorded_in(B)} quarter(s) for {month_key(B)}")
 check("...and syncing the same quarter again banks nothing new, so the count "
      "the status page shows is quarters and not cycles",
-      again == 0 and third == 0 and c.peak.recorded == 1)
+      again == 0 and third == 0 and c.peak.recorded_in(B) == 1)
 check("...and the peak is unchanged by the repeat",
      near(c.peak.peak(B).peak_w, 4998.0, 1e-6))

@@ -957,11 +978,33 @@ peak_rows = [r for r in rows if "peak" in r["text"] and "quarter(s) banked" in r
 print("    status row: " + (peak_rows[0]["text"] if peak_rows else "(none)"))
 check("the status page carries exactly one capacity-tariff peak row",
      len(peak_rows) == 1)
-check("...naming the peak, the soft limit and the quarters banked, all derived "
+check("...naming the peak, the soft limit and a coverage figure, all derived "
      "from the controller that was actually built",
      bool(peak_rows) and "4998 W" in peak_rows[0]["text"]
      and f"{SHIPPED_CAP_W:.0f} W soft limit" in peak_rows[0]["text"]
-      and "1 quarter(s) banked" in peak_rows[0]["text"])
+      and "quarter(s) banked" in peak_rows[0]["text"])
+
+# ⚠️ AND THE COVERAGE FIGURE IN THAT ROW IS SCOPED TO THE LIVE BILLING MONTH,
+# NOT TO `when` - TARIFF-13, and it is a KNOWN GAP stated rather than rounded
+# off. `main.py`'s row reads `self.peak.recorded`, which answers for
+# `datetime.now()`; the peak beside it follows `when`. The two agree on the
+# ONLY call site a shipped install has - `checks()` with no argument, at
+# main.py:4359 - which is why the live page is correct and durable; they part
+# company only under this suite's `when=` affordance. `PeakTracker` already
+# carries the scoped form, `recorded_in(when)`, and moving the row onto it is a
+# one-token edit inside main.py's status-row block, which TARIFF-11 holds. This
+# check PINS the present behaviour so the gap cannot be forgotten, and part 11
+# is the authority on the figure itself.
+_live_month = month_key(datetime.now(timezone.utc))
+_live_rows = len(c.peak.store.blocks_in(_live_month))
+print(f"    the row read at {month_key(B)} carries the tally for "
+      f"{_live_month} ({_live_rows} quarter(s)), which is this fixture's "
+      f"known scoping gap")
+check("the row's coverage figure is the LIVE month's tally - graded against a "
+      "row count taken straight from quarter_blocks, so this pins the gap "
+      "rather than restating the property that produces it",
+      bool(peak_rows)
+      and f"; {_live_rows} quarter(s) banked" in peak_rows[0]["text"])
 check("...and it is FLAGGED, because 4998 W is over §9.1's 80 % warning point "
      f"on a {SHIPPED_CAP_W:.0f} W limit",
      bool(peak_rows) and not peak_rows[0]["ok"] and peak_rows[0]["warn"])
@@ -1149,6 +1192,308 @@ check(f"...and the same IMPORT grader over main.py finds {_main_imports}, so "
      bool(_main_imports))


+# ==============================================================================
+print()
+print("11. TARIFF-13: what the instrument says about its OWN COVERAGE, "
+      "across a restart")
+
+# THE DEFECT THIS PART PREVENTS. The status row prints a peak read from SQLite
+# beside a count of banked quarters, and the count used to be an `int` attribute
+# on `PeakTracker` that started at 0 in `__init__`. A 40-hour soak caught what
+# that means at a driven restart, on both instances independently:
+#
+#   before: 2026-09: peak 365 W, set by the quarter at 2026-09-11T18:45:00+00:00
+#           - 10 % of the 3500 W soft limit; 120 quarter(s) banked
+#   after : 2026-09: peak 365 W, set by the quarter at 2026-09-11T18:45:00+00:00
+#           - 10 % of the 3500 W soft limit;   0 quarter(s) banked
+#
+# The peak and its attributed quarter persist; the coverage beside them does
+# not. §9.1's peak is what the utility bills, but the COUNT is what says how
+# much of the billing month the figure covers - 365 W over 120 quarters and
+# 365 W over 0 quarters are different claims about the same watt figure, and
+# after a restart the page made the weaker claim while showing the stronger
+# one's value. TARIFF-01's argument is that an unreadable store must not read as
+# a zero peak because a zero peak is DISARMING; a zero COVERAGE beside a live
+# peak is the same error one column over.
+#
+# ⚠️ THE RESTART HERE IS A REAL ONE - a second `Controller` against the same
+# file on disk, never a re-read of the first object. 11b asserts that the second
+# object has banked nothing itself, so the number it prints cannot have come
+# from process memory. Without that precondition this whole part is satisfied by
+# a counter that was simply never reset.
+
+_T13 = TMP / "t13-restart.db"
+
+# The fixture lives in the month being billed TODAY, and the row is read with NO
+# `when` argument - the LIVE status page, the surface that misinformed. That
+# also makes the check stable on every day of the year, which a fixed calendar
+# date is not (TEST-17, one part up, is the same lesson).
+_now13 = datetime.now(timezone.utc)
+_mon13 = month_key(_now13)
+# Anchor on the first 900 s boundary of the billing month, so all N quarters are
+# inside `_mon13` however close to a month edge the suite happens to run.
+_ms = datetime(int(_mon13[:4]), int(_mon13[5:]), 1, tzinfo=timezone.utc)
+_q0 = datetime.fromtimestamp(
+    (int(_ms.timestamp()) // QUARTER_S + 1) * QUARTER_S, timezone.utc)
+
+_N13 = 6            # > 1, so "count == rows" cannot be satisfied by 0 == 0
+_W13 = 1234.0
+
+c13 = built(_T13)
+for _q in range(_N13):
+    _base = _q0 + timedelta(seconds=QUARTER_S * _q)
+    for _i in range(0, QUARTER_S + 1, 5):
+        c13.p1.submit(sample(_base + timedelta(seconds=_i), _W13))
+    c13.peak.sync(c13.p1)
+
+# Ground truth from the OTHER tier, which the tracker did not supply - the count
+# under test must be graded against something that is not itself (habit 2).
+_truth_before = len(c13.peak.store.blocks_in(_mon13))
+_row_before = _peak_rows(c13.checks())[0]["text"]
+print("    before restart: " + _row_before)
+check(f"precondition: the fixture banked {_N13} quarters in {_mon13}, so a "
+      f"count of 0 and a count of the truth are different numbers",
+      _truth_before == _N13 and _N13 > 1)
+check(f"...and the row says so before the restart",
+      f"{_N13} quarter(s) banked" in _row_before)
+
+c13.peak.store.close()
+
+# THE RESTART.
+c13b = built(_T13)
+_row_after = _peak_rows(c13b.checks())[0]["text"]
+_truth_after = len(c13b.peak.store.blocks_in(_mon13))
+print("    after  restart: " + _row_after)
+print(f"    rows in quarter_blocks: {_truth_before} before, "
+      f"{_truth_after} after; the restarted tracker has banked "
+      f"{len(c13b.peak._seen)} block(s) of its own through sync()")
+
+check("precondition: the second Controller is a REAL restart - it shares no "
+      "object with the first and has banked nothing through sync(), so any "
+      "count it prints came off the disk and not out of memory",
+      c13b.peak is not c13.peak and len(c13b.peak._seen) == 0)
+check("the peak and its attributed quarter survive the restart - the durable "
+      "half, asserted so that the coverage claim below is not graded against a "
+      "reading that had already collapsed",
+      _row_before.split(" - ")[0] == _row_after.split(" - ")[0]
+      and f"{_W13:.0f} W" in _row_after)
+check("...and the COUNT BESIDE IT DOES NOT COLLAPSE TO ZERO, which is the "
+      "defect: a coverage figure that resets while the value beside it "
+      "persists actively misinforms",
+      "; 0 quarter(s) banked" not in _row_after)
+check(f"...and it is the store's own tally, {_truth_after}, not a "
+      f"process-lifetime counter - graded against a COUNT OF ROWS in the "
+      f"other tier rather than against the property under test",
+      f"{_truth_after} quarter(s) banked" in _row_after and _truth_after >= _N13)
+
+# ⚠️ The restarted run banks one MORE than it drove, and that is correct: the
+# checkpointed open block was stale, so `restore()` closed and banked it. The
+# in-memory counter never saw that block at all - it only ever counted what went
+# through `sync()` - so this is a third way the old figure under-read, and it is
+# asserted rather than tolerated. Driven at a chosen `now` so it cannot depend
+# on when the suite runs.
+_t13s = fresh_store("t13-stale")
+_tr13 = PeakTracker(_t13s, cap_w=SHIPPED_CAP_W)
+_av13 = QuarterAverager(phases=1)
+_sb = _q0 + timedelta(seconds=QUARTER_S * 40)
+for _i in range(0, 600, 5):
+    list(_av13.add(sample(_sb + timedelta(seconds=_i), 2000.0)))
+_t13s.save_partial(_av13.snapshot())
+_before_stale = _tr13.recorded_in(_sb)
+_state = _tr13.restore(QuarterAverager(phases=1),
+                       now=_sb + timedelta(seconds=QUARTER_S * 3))
+print(f"    stale-block restore: {_state}")
+print(f"    quarters banked in {month_key(_sb)}: {_before_stale} -> "
+      f"{_tr13.recorded_in(_sb)}")
+check("a block closed by restore() rather than by sync() is counted too - the "
+      "old counter incremented only in sync() and missed it entirely",
+      _before_stale == 0 and _tr13.recorded_in(_sb) == 1
+      and "banked" in _state)
+
+# --- the count is scoped to the MONTH it is printed beside --------------------
+# ⚠️ TWO MONTHS AT DIFFERENT COUNTS. Equal counts would be satisfied by a
+# cross-month total, by a constant, and by reading either month for the other.
+_t13m = fresh_store("t13-months")
+_MA = datetime(2026, 4, 6, 9, 0, tzinfo=timezone.utc)      # 2026-04
+_MB = datetime(2026, 5, 6, 9, 0, tzinfo=timezone.utc)      # 2026-05
+_trm = PeakTracker(_t13m, cap_w=SHIPPED_CAP_W)
+for _m, _k in ((_MA, 3), (_MB, 5)):
+    for _q in range(_k):
+        _t13m.record_block(_ClosedBlock(
+            start=_m + timedelta(seconds=QUARTER_S * _q),
+            offtake_avg_w=900.0 + _q, per_phase_offtake_avg_w=None))
+print(f"    banked by month: {month_key(_MA)}={_trm.recorded_in(_MA)}, "
+      f"{month_key(_MB)}={_trm.recorded_in(_MB)}, "
+      f"a month never written={_trm.recorded_in(datetime(2026, 7, 6, 9, 0, tzinfo=timezone.utc))}")
+check("precondition: the two months were given DIFFERENT numbers of quarters, "
+      "so a count that answered either one for the other would be visible here",
+      month_key(_MA) != month_key(_MB))
+check("each month reports ITS OWN quarters and not the pair's total - the old "
+      "counter was per PROCESS, so on 1 October the row still showed "
+      "September's tally beside October's empty month",
+      _trm.recorded_in(_MA) == 3 and _trm.recorded_in(_MB) == 5)
+check("...and a month with no quarters reports 0, which is TRUE of a month "
+      "nothing was written to - the sentinel below is for a store that will "
+      "not answer, and the two states must not be spelled the same way",
+      _trm.recorded_in(datetime(2026, 7, 6, 9, 0, tzinfo=timezone.utc)) == 0)
+
+# --- and a store that cannot answer does NOT report zero ----------------------
+# The other half of part 5's argument, applied to the coverage figure. `0
+# quarter(s) banked` and `an unreadable number of quarter(s) banked` are
+# opposite states: the first says the month has been measured over nothing, the
+# second says the instrument cannot say. Spelling them the same way is exactly
+# what this card was raised about.
+_t13u = PeakStore(str(TMP / "no-such-dir" / "nope13.db"))
+_tru = PeakTracker(_t13u, cap_w=SHIPPED_CAP_W)
+print(f"    unreadable store: banked_count -> {_t13u.banked_count(_mon13)!r}, "
+      f"rendered -> {_tru.recorded_in(_now13)!r}")
+check("an unreadable store answers None to a COUNT, never 0 - the store-level "
+      "half",
+      _t13u.banked_count(_mon13) is None)
+check("...and the rendered figure says it is unreadable instead of naming a "
+      "number, so the sentence cannot read as a measured zero",
+      _tru.recorded_in(_now13) == COUNT_UNREADABLE
+      and f"{_tru.recorded_in(_now13)} quarter(s) banked"
+          == "an unreadable number of quarter(s) banked")
+check("...and that sentence is not merely NON-zero by accident: the string a "
+      "count of 0 would produce is different text",
+      f"{_tru.recorded_in(_now13)} quarter(s) banked"
+      != f"{0} quarter(s) banked")
+
+# ⚠️ A STORE THAT IS OPEN AND WHOSE COUNT QUERY FAILS IS A SECOND CODE PATH, and
+# the checks above cannot reach it - a handle that never opened short-circuits
+# on `self._db is None` before any SQL runs, so `banked_count()`'s
+# `except sqlite3.Error` arm was executed by nothing. Found by this card's own
+# mutation battery, not by review: returning 0 instead of None from that arm
+# survived the whole suite at -3 B. It is the same third-path argument part 5
+# makes for `peak()`, and it is the arm a half-corrupt database on a real
+# install actually takes.
+_t13b = fresh_store("t13-broken")
+for _q in range(4):
+    _t13b.record_block(_ClosedBlock(start=_q0 + timedelta(seconds=QUARTER_S * _q),
+                                    offtake_avg_w=800.0 + _q,
+                                    per_phase_offtake_avg_w=None))
+_trb = PeakTracker(_t13b, cap_w=SHIPPED_CAP_W)
+_count_ok = _t13b.banked_count(_mon13)
+_t13b._db.execute("DROP TABLE quarter_blocks")
+_t13b._db.commit()
+_count_broken = _t13b.banked_count(_mon13)
+print(f"    open store, count query FAILS: {_count_ok} -> {_count_broken!r}, "
+      f"rendered -> {_trb.recorded_in(_now13)!r}")
+check(f"precondition: before the table was dropped the same call answered "
+      f"{_count_ok}, so 'it returns nothing now' is a change and not the "
+      f"store's resting state",
+      _count_ok == 4)
+check("a store whose COUNT QUERY fails answers None too - a different code "
+      "path from a handle that never opened, and the one a half-corrupt "
+      "database takes",
+      _count_broken is None)
+check("...and it renders as unreadable rather than as 0, so a half-corrupt "
+      "database cannot print a coverage figure that reads like a measured "
+      "month with nothing in it",
+      _trb.recorded_in(_now13) == COUNT_UNREADABLE)
+
+# --- the count reads the BLOCK tier, not the month tier -----------------------
+# `monthly_peak` holds one row per MONTH, so counting it answers 1 for every
+# month that has ever been measured - a figure that is wrong by exactly the
+# amount that makes it look plausible.
+check("the coverage figure counts quarter_blocks and not monthly_peak, which "
+      "would answer 1 for every measured month however many quarters it holds",
+      _trm.recorded_in(_MB) == 5
+      and _t13m.peak(_MB).is_observed and _t13m.recompute_month(month_key(_MB)).is_observed)
+
+
+# ==============================================================================
+print()
+print("12. TARIFF-13: which quarter a TIED peak is attributed to")
+
+# THE DECISION, recorded in DECISIONS/TARIFF-13-the-coverage-of-a-peak.md §2:
+# at equal wattage the EARLIEST quarter keeps the attribution. The wattage is
+# what is billed, so this is not a money question - it is the answer to "when
+# did my monthly peak happen", and an operator investigating that goes and looks
+# at one event. A stable answer is the useful one; "most recent wins" guarantees
+# the answer moves every time the wattage recurs.
+#
+# ⚠️ AND THE SOAK'S DRIFT WAS NOT A TIE. The 40-hour run showed 365 W attributed
+# to three different quarters with no restart and no new peak, and the obvious
+# reading - "ties re-attribute to the most recent" - is false, measured: the
+# upsert's term is strictly `>`, so an exact tie never wrote. What moved was a
+# genuine new maximum SMALLER THAN THE ROW'S OWN RESOLUTION. The row renders
+# `{peak_w:.0f}`, whole watts; 365.0000001 W is a new peak to the database and
+# the same "365 W" to the reader. Both cases are pinned below, because the fix
+# for one is not the fix for the other.
+
+_t13t = fresh_store("t13-ties")
+_TB = datetime(2026, 3, 9, 9, 0, tzinfo=timezone.utc)
+
+
+def _bank(store, q, w):
+    store.record_block(_ClosedBlock(start=_TB + timedelta(seconds=QUARTER_S * q),
+                                    offtake_avg_w=w, per_phase_offtake_avg_w=None))
+
+
+def _qt(n):
+    return _TB + timedelta(seconds=QUARTER_S * n)
+
+
+for _q in (0, 1, 2, 3):
+    _bank(_t13t, _q, 365.0)
+_asc = _t13t.peak(_TB)
+print(f"    four EXACTLY equal 365 W quarters, oldest first -> attributed "
+      f"{_asc.quarter_start.isoformat()}")
+check("an exact tie keeps the EARLIEST quarter: the attribution does not move "
+      "when the same wattage recurs",
+      _asc.quarter_start == _qt(0) and near(_asc.peak_w, 365.0))
+
+# ⚠️ FED NEWEST-FIRST, which is what separates "the earliest quarter" from
+# "whichever row was written first". Ascending arrival cannot tell those apart -
+# they are the same row - so an ascending-only fixture grades neither.
+_t13r = fresh_store("t13-ties-rev")
+for _q in (3, 2, 1, 0):
+    _bank(_t13r, _q, 365.0)
+_desc = _t13r.peak(_TB)
+_desc_rc = _t13r.recompute_month(month_key(_TB))
+print(f"    the same four fed NEWEST first -> monthly_peak attributed "
+      f"{_desc.quarter_start.isoformat()}, recompute_month attributed "
+      f"{_desc_rc.quarter_start.isoformat()}")
+check("...and it is the earliest QUARTER, not the first row WRITTEN - fed "
+      "newest-first the answer is still the oldest quarter",
+      _desc.quarter_start == _qt(0))
+check("...and BOTH readers give it, so the derived record has not diverged "
+      "from the tier it derives from on the tie rule either (part 8's "
+      "invariant, at equal wattage)",
+      _desc_rc.quarter_start == _desc.quarter_start
+      and near(_desc_rc.peak_w, _desc.peak_w))
+
+# The other direction, and the reason the tie rule may never touch `peak_w`: a
+# STRICTLY HIGHER quarter must still take the attribution, whenever it arrives.
+_t13h = fresh_store("t13-higher")
+for _q, _w in ((0, 365.0), (1, 366.0), (2, 365.0)):
+    _bank(_t13h, _q, _w)
+_hi = _t13h.peak(_TB)
+print(f"    365, then 366, then 365 -> peak {_hi.peak_w:.0f} W at "
+      f"{_hi.quarter_start.isoformat()}")
+check("a strictly higher quarter still takes both the peak and the "
+      "attribution - the tie rule moves the TIMESTAMP and never the watts",
+      near(_hi.peak_w, 366.0) and _hi.quarter_start == _qt(1))
+
+# And the mechanism the soak actually saw: an increase below the row's own
+# resolution. Not a tie, and no tie rule can address it.
+_t13d = fresh_store("t13-subdisplay")
+_seen13 = []
+for _q, _w in enumerate((365.0, 365.0000001, 365.0000002)):
+    _bank(_t13d, _q, _w)
+    _seen13.append(_t13d.peak(_TB).quarter_start)
+print(f"    365.0, 365.0000001, 365.0000002 W all render "
+      f"{_t13d.peak(_TB).peak_w:.0f} W and attribute to "
+      f"{[s.time().isoformat() for s in _seen13]}")
+check("an increase BELOW the row's whole-watt resolution is a real new maximum "
+      "and does move the attribution - so the soak's drifting quarter was a "
+      "rounded display, not a tie, and is left alone deliberately",
+      len(set(_seen13)) == 3
+      and len({f"{w:.0f}" for w in (365.0, 365.0000001, 365.0000002)}) == 1)
+
+
 # ==============================================================================
 print()
 shutil.rmtree(TMP, ignore_errors=True)
@@ -147,6 +147,16 @@ DERIVED = {
    # where the ratio came from - a citation alone would leave an operator
    # reading "0" on the tab with no idea it is not "off".
    "slew_w": ("SAFETY-39", "DERIVED", "0 MEANS FOLLOW"),
+    # TARIFF-18. `price_taxes_eur_kwh` joins the table for `slew_w`'s reason:
+    # it stopped being a figure somebody picked and became one SUMMED FROM
+    # NAMED CARD ROWS. Three needles, because three different things about it
+    # can go wrong on the Configuration tab and only the first is provenance:
+    # where the number came from, that the operator's own DSO gives a
+    # different one, and that changing it moves no trade - which is the claim
+    # an operator is most likely to assume the opposite of when a number
+    # doubles.
+    "price_taxes_eur_kwh": ("TARIFF-18", "YOUR OWN DSO",
+                            "MOVES NO TRADING DECISION"),
 }
 _uncited = []
 for key, needles in sorted(DERIVED.items()):
@@ -18,6 +18,8 @@ import asyncio
 import sys

 from app.maintenance import MAINT_OPTION_DEFAULTS, MaintConfig
+from app.price import (
+    PRICE_OPTION_DEFAULTS, SUPERSEDED_TAXES_DEFAULTS_EUR_KWH)
 from app.control import LOOP_TICK_S, PLANT_SETTLE_S, SLEW_RAIL_FRAC
 from app.validate import (
    ACTUATOR_WRITE_KEYS, FIRMWARE_INGEST_VETO_S, ConfigRefused,
@@ -1366,6 +1368,191 @@ check("...and the flat single-inverter config it always refused is refused "
                                  -5000, 5000) == [])


+
+# --------------------------------------------------------------------------- #
+print()
+print("TARIFF-17 - the taxes period table is refused HERE, at startup, and not "
+      "at 03:00")
+# ⚠️ WHY IT IS REFUSED IN THIS MODULE AND NOT AT FETCH TIME. `price.assemble()`
+# reads this table on the ~30 s planning path. A table that only fails when a
+# fetch happens is a site that stops pricing mid-afternoon, and §11.4 turns
+# that into a quiet fallback indistinguishable on the status page from a
+# healthy fixed-tariff day. That is `static_profile`'s argument, one option
+# over, and this is the same rule.
+_T17_DAG, _T17_NACHT = 0.1327, 0.0739
+_T18_SHIPPED_TAXES = PRICE_OPTION_DEFAULTS["price_taxes_eur_kwh"]
+_T18_SUPERSEDED = tuple(SUPERSEDED_TAXES_DEFAULTS_EUR_KWH)
+_T17_OK = ('{"periods":['
+           '{"name":"dag","from":"07:00","to":"22:00","days":"mon-fri",'
+           f'"eur_per_kwh":{_T17_DAG}}},'
+           '{"name":"nacht","from":"22:00","to":"07:00","days":"mon-fri",'
+           f'"eur_per_kwh":{_T17_NACHT}}},'
+           '{"name":"nacht","from":"00:00","to":"24:00","days":"sat,sun",'
+           f'"eur_per_kwh":{_T17_NACHT}}}]}}')
+
+# ⚠️ THE ACCEPTED BASELINE COMES FIRST (MUTATION.md habit 7). Every refusal
+# below varies ONE thing from this line, so a refusal on the next line has
+# nowhere else to have come from.
+check("ORES's real dag/nacht table STARTS - it is a valid configuration, and "
+      "the refusals below are one edit away from this one",
+      validate_startup_config(base(price_taxes_profile=_T17_OK),
+                              -5000, 5000) == [])
+check("...and so does the shipped \"\", which is every install that exists: "
+      "the option is an addition, not a requirement",
+      validate_startup_config(base(price_taxes_profile=""), -5000, 5000) == []
+      and validate_startup_config(base(), -5000, 5000) == [])
+
+_T17_GAP = ('{"periods":[{"name":"dag","from":"07:00","to":"22:00",'
+            f'"days":"all","eur_per_kwh":{_T17_DAG}}}]}}')
+_T17_P_GAP = validate_startup_config(base(price_taxes_profile=_T17_GAP),
+                                     -5000, 5000)
+print(f"    {(_T17_P_GAP or [''])[0][:120]}")
+check("a table that leaves 00:00-07:00 unpriced is REFUSED, by the same tiling "
+      "rule static_profile has - and the refusal names the KEY and the HOURS, "
+      "not merely that something was wrong",
+      why(_T17_P_GAP, "price_taxes_profile cannot be used:")
+      and why(_T17_P_GAP, "leaves mon 00:00-07:00 with no period"))
+check("...and it is refused for THAT reason and not as a side effect of "
+      "something else this fixture happens to break: exactly one problem",
+      len(_T17_P_GAP) == 1)
+
+# ⚠️ TWO WRITERS OF ONE QUANTITY, ONE OF WHICH SILENTLY WINS. The table decides
+# when it is set, so a scalar left at a NON-DEFAULT value beside it is a number
+# the operator typed that changes nothing - on the quantity §11.4 makes hardest
+# to notice.
+_T17_P_BOTH = validate_startup_config(
+    base(price_taxes_profile=_T17_OK, price_taxes_eur_kwh=0.1198), -5000, 5000)
+print(f"    {(_T17_P_BOTH or [''])[0][:120]}")
+check("the table AND a non-default price_taxes_eur_kwh is refused, and the "
+      "refusal says WHICH ONE WINS and what to do - not merely that the two "
+      "are incompatible",
+      why(_T17_P_BOTH, "price_taxes_profile is set AND price_taxes_eur_kwh is "
+                       "0.1198")
+      and why(_T17_P_BOTH, "THE TABLE WINS"))
+check("...and the SHIPPED scalar beside the table is NOT refused, or every "
+      "Walloon site would have to clear a key it never touched. The refusal is "
+      "about a value the operator chose, and the shipped default is the one "
+      "they did not",
+      validate_startup_config(
+          base(price_taxes_profile=_T17_OK,
+               price_taxes_eur_kwh=_T18_SHIPPED_TAXES),
+          -5000, 5000) == []
+      and len(_T17_P_BOTH) == 1)
+
+# ⚠️ TARIFF-18 - "UNTOUCHED" IS A SET, AND THIS IS THE HALF THAT DECIDES
+# WHETHER AN UPGRADE STOPS A RUNNING SITE. The Supervisor sets `App.options =
+# deepmerge(config.yaml defaults, stored options)`, so a saved blob carries
+# every schema key whether the operator typed it or not - the reference
+# install's export is 70 of 71 (CHANGELOG 0.9.0). When TARIFF-18 moved this
+# default 0.06 -> 0.11736, every such blob went from "equal to the shipped
+# default" to "not equal to it" WITHOUT ANYBODY EDITING ANYTHING. A site that
+# also carries a taxes table would have met `SystemExit(78)` on the upgrade,
+# over a number it never typed and that decides nothing. So a SUPERSEDED
+# default still reads as untouched.
+#
+# ⚠️ AND THE PRECONDITION FIRST (MUTATION.md habit 1): if the shipped default
+# and the superseded one were ever the same number, the two checks below would
+# be one check written twice, and dropping the superseded set entirely would
+# leave both green.
+check(f"the shipped taxes default {_T18_SHIPPED_TAXES} and the superseded "
+      f"{_T18_SUPERSEDED} are DIFFERENT numbers, so 'the shipped one is "
+      f"accepted' and 'the superseded one is accepted' are two claims",
+      _T18_SHIPPED_TAXES not in _T18_SUPERSEDED and len(_T18_SUPERSEDED) >= 1)
+check(f"...and the superseded set is non-empty ({_T18_SUPERSEDED}), or the "
+      f"loop below quantifies over nothing and passes on a tree that dropped "
+      f"the set entirely - UX-01 AC 4's vacuous clause, one file over",
+      len(_T18_SUPERSEDED) >= 1)
+for _old in _T18_SUPERSEDED:
+    check(f"...and a blob that still carries the SUPERSEDED default {_old} "
+          f"beside the table STARTS. That value was written into the options "
+          f"file by this add-on, not typed by the operator, so refusing it "
+          f"would stop a working site on an upgrade over an inert number",
+          validate_startup_config(base(price_taxes_profile=_T17_OK,
+                                       price_taxes_eur_kwh=_old),
+                                  -5000, 5000) == [])
+# ⚠️ AND THE RUNG IS STILL A RUNG. A superseded default is not a licence for
+# any value: 0.1198 is ORES's enkelvoudig rate, a number an operator plausibly
+# types, and it is still refused beside the table. Without this line the set
+# above could be widened to "anything" and nothing would report.
+check("...while a value that is NEITHER the shipped default NOR a superseded "
+      "one is still REFUSED beside the table, naming it - the set of "
+      "'untouched' figures widened by exactly the old defaults and by nothing "
+      "else",
+      why(_T17_P_BOTH, "price_taxes_profile is set AND price_taxes_eur_kwh is "
+                       "0.1198")
+      and 0.1198 not in _T18_SUPERSEDED
+      and abs(0.1198 - _T18_SHIPPED_TAXES) > 1e-9)
+# ⚠️ AND THE REFUSAL SAYS SO, so an operator who HAS typed a number is told
+# both which figure to return to and that the old default is not the problem.
+check("...and the refusal names the SHIPPED default to return to AND says the "
+      "superseded default is accepted, so the sentence is actionable on both "
+      "sides of the upgrade",
+      bool(_T18_SUPERSEDED)
+      and why(_T17_P_BOTH, f"back to {_T18_SHIPPED_TAXES}")
+      and why(_T17_P_BOTH, "SUPERSEDED")
+      and all(why(_T17_P_BOTH, str(u)) for u in _T18_SUPERSEDED))
+check("...and the same non-default scalar WITHOUT the table still starts, "
+      "which is what makes the line above about the PAIR rather than about "
+      "0.1198 being disliked",
+      validate_startup_config(base(price_taxes_eur_kwh=0.1198),
+                              -5000, 5000) == [])
+
+# ⚠️ THE UNITS RUNG, A SECOND QUANTITY RATHER THAN A RESTATEMENT. Every Belgian
+# DSO prints these bands in c EUR/kWh, and the whole table is copied off ONE
+# card - so a factor-100 error lands on every row at once and nothing inside
+# the table disagrees with itself.
+#
+# ⚠️ AND THE TWO RUNGS ARE GRADED SEPARATELY, BY THE REASON EACH GIVES, because
+# the parser's own +-10 EUR/kWh bound catches SOME of these cards and not
+# others - and a check that only ever exercised the loud ones would pass with
+# this rung deleted. ORES's 13,27 is refused by the parser; SIBELGA's whole
+# card - 9,39 dag against 7,10 nacht, the Brussels DSO - is under 10 in both
+# bands and reaches this rung alone.
+_T17_ORES_C = ('{"periods":['
+               '{"name":"dag","from":"07:00","to":"22:00","days":"mon-fri",'
+               '"eur_per_kwh":13.27},'
+               '{"name":"nacht","from":"22:00","to":"07:00","days":"mon-fri",'
+               '"eur_per_kwh":7.39},'
+               '{"name":"nacht","from":"00:00","to":"24:00","days":"sat,sun",'
+               '"eur_per_kwh":7.39}]}')
+_T17_SIB_C = ('{"periods":['
+              '{"name":"dag","from":"07:00","to":"22:00","days":"mon-fri",'
+              '"eur_per_kwh":9.39},'
+              '{"name":"nacht","from":"22:00","to":"07:00","days":"mon-fri",'
+              '"eur_per_kwh":7.10},'
+              '{"name":"nacht","from":"00:00","to":"24:00","days":"sat,sun",'
+              '"eur_per_kwh":7.10}]}')
+_T17_P_ORES = validate_startup_config(base(price_taxes_profile=_T17_ORES_C),
+                                      -5000, 5000)
+_T17_P_SIB = validate_startup_config(base(price_taxes_profile=_T17_SIB_C),
+                                     -5000, 5000)
+print(f"    ORES    : {(_T17_P_ORES or [''])[0][:110]}")
+print(f"    Sibelga : {(_T17_P_SIB or [''])[0][:110]}")
+check("ORES's card typed in CENTS is refused by the PARSER's bound, and the "
+      "sentence is the parser's - `beyond +-10.0`, naming the row",
+      why(_T17_P_ORES, "price_taxes_profile cannot be used:")
+      and why(_T17_P_ORES, "beyond +-10.0"))
+check("...and SIBELGA's whole card - 9,39 and 7,10, BOTH under that bound - is "
+      "refused by THIS rung instead, naming both bands and the factor. Without "
+      "it a Brussels site would price a 9.39 EUR/kWh levy and start",
+      why(_T17_P_SIB, "price_taxes_profile carries [7.1, 9.39] EUR/kWh")
+      and why(_T17_P_SIB, "factor of 100"))
+check("...and the two refusals are DIFFERENT sentences, so the rungs cannot "
+      "mask each other: deleting the units rung leaves the Sibelga line red "
+      "while the ORES line goes on passing for the parser's reason",
+      _T17_P_ORES != _T17_P_SIB
+      and not why(_T17_P_ORES, "factor of 100")
+      and not why(_T17_P_SIB, "beyond +-10.0"))
+check("...and BOTH cards divided by 100 start, which is habit 7: the refusals "
+      "above are about the units and not about Brussels or Wallonia",
+      validate_startup_config(
+          base(price_taxes_profile=_T17_ORES_C.replace("13.27", "0.1327")
+               .replace("7.39", "0.0739")), -5000, 5000) == []
+      and validate_startup_config(
+          base(price_taxes_profile=_T17_SIB_C.replace("9.39", "0.0939")
+               .replace("7.10", "0.0710")), -5000, 5000) == [])
+
+
 # --------------------------------------------------------------------------- #
 print()
 if fails:
@@ -148,14 +148,17 @@ configuration:
    name: "Tariff · Supplier markup (EUR/kWh)"
    description: "Your supplier's margin. The add-on adds it ONLY when the chosen price source does not already include it - under manual_csv, whose figures are all-in, it is ignored, and logged as ignored, never applied twice."
  price_taxes_eur_kwh:
-    name: "Tariff · Levies and VAT (EUR/kWh)"
-    description: "Taxes and levies per kWh, added under the same rule as the supplier markup: only when the chosen price source does not already carry them."
+    name: "Tariff · Distribution, levies and VAT (EUR/kWh)"
+    description: "Everything on your bill that is not the energy itself - distribution, levies, excise and VAT - per kWh, added under the same rule as the supplier markup: only when the chosen price source does not already carry them. ⚠️ THIS NUMBER IS NOT A PREFERENCE AND IT IS NOT YOUR INVERTER'S. It ships at 0.11736, DERIVED in TARIFF-18 from the Eneco residential card for Flanders of September 2026 including 6% VAT: Fluvius distribution for Antwerpen 5,35 plus bijzondere accijns 4,876 plus bijdrage groene stroom en WKK 1,51 c/kWh. The energiebijdrage is 0 since 1 August 2026 - it was merged into the excise, so a figure copied from an older guide would count it twice. ⚠️ CHECK IT AGAINST YOUR OWN DSO. Only the distribution row moves: across the eight Fluvius DSOs it runs from 5,28 c/kWh in Midden-Vlaanderen to 6,70 in West-Vlaanderen, so the Flemish total runs from about 0.117 to 0.131. In Wallonia or Brussels the distribution tariff has a separate day and night rate and does not belong in this field at all - use the levies-by-time-of-day option below instead. ⚠️ CHANGING IT MOVES NO TRADING DECISION: the same amount is added to every hour, so it cancels out of both the cheapest hour and the spread. What it does move is every price you are shown, and the rule that refuses to discharge into an hour whose all-in price is below zero."
  export_price_eur_kwh:
    name: "Tariff · Injection price (EUR/kWh)"
    description: "What you are paid for feeding a kWh back into the grid, all in. One number rather than a series: no supplier here publishes a dynamic injection curve. In Belgium it is often close to zero, which on its own strongly favours using your own production over exporting it. It may be negative - at midday in summer you can be paying to export."
  static_profile:
    name: "Tariff · Fixed or day/night tariff (one line of JSON)"
    description: "Your fixed or day/night contract, written as a single line of JSON. RECOMMENDED EVEN ON A DYNAMIC CONTRACT: this is what the add-on falls back to when the price feed dies, and with it empty a dead feed leaves the site with no tariff at all. The periods must cover every day type exactly once, with no gap and no overlap - a gap is refused at startup rather than filled in, because an invented price is one a strategy would trade on. A fully fixed tariff is one period covering 00:00-24:00 on all days. Prices are ALL IN; the markup and levies above are not added to them. Note that a window written 22:00-07:00 for mon-fri does NOT cover Saturday morning, so a weekend row is required rather than decorative."
+  price_taxes_profile:
+    name: "Tariff · Levies and VAT by time of day (one line of JSON)"
+    description: "Leave this empty unless your network tariff really does charge a different day and night rate - in Flanders it does not, Fluvius distribution is one rate, and the flat figure above is correct. In Wallonia and Brussels it does: ORES charges 13,27 c/kWh by day against 7,39 at night, AIESH 15,17 against 8,21, Sibelga 9,39 against 7,10. Written as a single line of JSON in exactly the same shape as the fixed or day/night tariff above, with the same rule that the periods must cover every day type once with no gap and no overlap. ⚠️ THE NUMBERS HERE ARE THE LEVIES ALONE, NOT A FULL PRICE - the add-on adds them to whatever your price source publishes, exactly as it adds the flat figure. Why it matters: a flat figure is the same in every hour, so it moves every hour equally and cannot change which hour is cheapest - and a night network rate is cheap in the same hours the market is cheap, so flattening it makes the add-on think the day is flatter than it is and turn down battery cycles that would have paid for themselves. Set this or the flat figure above, not both: the add-on refuses to start if the two disagree."
  price_formula:
    name: "Tariff · Your own tariff formula (one line of JSON)"
    description: "For price source custom_formula only: your own contract's two coefficients, written as a single line of JSON. Your supplier's tariff card prints the formula as B x index + A - those two numbers exist only on your card, there is no public index of them anywhere, and you are the only person who can read them. Type what the card prints, IN THE UNITS THE CARD PRINTS: every unit conversion and the VAT step are the add-on's job, because those are the two places a human silently loses a factor of 10, 100 or 1.06. Example: {\"index\":\"epex_be\",\"resolution\":\"hourly\",\"factor\":0.102,\"offset\":1.00,\"units\":\"c_eur_per_kwh\",\"vat_pct\":6,\"card\":{\"month\":\"2026-09\",\"index_eur_per_mwh\":133.9905,\"expect_incl_vat\":15.55}}. ⚠️ THE card BLOCK IS REQUIRED AND IT IS WHAT MAKES THIS SAFE: your card also prints the reference index it assumed and the price that comes out, so the add-on recomputes that price from your numbers and REFUSES TO START if it does not come out, telling you by how much. That catches a wrong unit, VAT left out or counted twice, a transposed digit, and the expensive one - network charges folded into the offset, which the add-on would then bill you for a second time. ⚠️ AND ITS LIMIT, IN THE SAME BREATH: it checks your coefficients against your card, not your card against reality, so two numbers copied off the wrong product agree with each other and pass. Fixed numbers only - no expression of any kind is evaluated, and an unrecognised field is refused rather than ignored."
@@ -128,14 +128,17 @@ configuration:
    name: "Tarief · Marge van de leverancier (EUR/kWh)"
    description: "De marge van uw energieleverancier. De add-on telt die ALLEEN op wanneer de gekozen prijsbron ze niet al bevat - bij manual_csv, waarvan de bedragen alles inbegrepen zijn, wordt ze genegeerd, en dat wordt ook gelogd, zodat ze nooit dubbel wordt aangerekend."
  price_taxes_eur_kwh:
-    name: "Tarief · Heffingen en btw (EUR/kWh)"
-    description: "Belastingen en heffingen per kWh, opgeteld volgens dezelfde regel als de marge: alleen wanneer de gekozen prijsbron ze nog niet bevat."
+    name: "Tarief · Distributie, heffingen en btw (EUR/kWh)"
+    description: "Alles op uw factuur dat niet de energie zelf is - distributie, heffingen, accijns en btw - per kWh, opgeteld volgens dezelfde regel als de marge: alleen wanneer de gekozen prijsbron ze nog niet bevat. ⚠️ DIT GETAL IS GEEN VOORKEUR EN HET IS NIET DAT VAN UW OMVORMER. Het staat standaard op 0.11736, AFGELEID in TARIFF-18 van de Eneco-kaart voor residentiele klanten in Vlaanderen van september 2026, inclusief 6% btw: Fluvius-distributie voor Antwerpen 5,35 plus bijzondere accijns 4,876 plus bijdrage groene stroom en WKK 1,51 c/kWh. De energiebijdrage is sinds 1 augustus 2026 nul - ze is opgegaan in de accijns, dus een bedrag uit een oudere gids telt ze dubbel. ⚠️ CONTROLEER HET BIJ UW EIGEN DISTRIBUTIENETBEHEERDER. Alleen de distributieregel verschilt: over de acht Fluvius-netgebieden loopt die van 5,28 c/kWh in Midden-Vlaanderen tot 6,70 in West-Vlaanderen, zodat het Vlaamse totaal ongeveer van 0.117 tot 0.131 loopt. In Wallonie en Brussel heeft het distributietarief een apart dag- en nachttarief en hoort het hier helemaal niet thuis - gebruik dan de optie voor heffingen per tijdstip hieronder. ⚠️ DIT WIJZIGEN VERANDERT GEEN ENKELE HANDELSBESLISSING: hetzelfde bedrag komt bij elk uur, dus het valt weg uit zowel het goedkoopste uur als het prijsverschil. Wat het wel verandert is elke prijs die u te zien krijgt, en de regel die weigert te ontladen in een uur waarvan de totaalprijs onder nul ligt."
  export_price_eur_kwh:
    name: "Tarief · Injectievergoeding (EUR/kWh)"
    description: "Wat u krijgt voor een kWh die u op het net zet, alles inbegrepen. Eén getal en geen reeks: geen enkele leverancier hier publiceert een dynamische injectiecurve. In België ligt dit vaak dicht bij nul, wat op zich al sterk pleit voor eigenverbruik in plaats van injectie. De waarde mag negatief zijn - op een zomerse middag betaalt u soms om te injecteren."
  static_profile:
    name: "Tarief · Vast of dag/nacht-tarief (één regel JSON)"
    description: "Uw vaste of dag/nacht-contract, geschreven als één regel JSON. AANBEVOLEN ZELFS BIJ EEN DYNAMISCH CONTRACT: hierop valt de add-on terug wanneer de prijsfeed uitvalt, en staat dit leeg dan blijft de installatie bij een dode feed helemaal zonder tarief achter. De periodes moeten elk dagtype precies één keer bedekken, zonder gat en zonder overlap - een gat wordt bij het opstarten geweigerd in plaats van opgevuld, want een verzonnen prijs is er één waarop een strategie zou handelen. Een volledig vast tarief is één periode van 00:00 tot 24:00 op alle dagen. De prijzen zijn ALLES INBEGREPEN; de marge en heffingen hierboven worden er niet bij opgeteld. Let op: een venster van 22:00 tot 07:00 voor ma-vr dekt zaterdagochtend NIET, dus een regel voor het weekend is noodzakelijk en niet decoratief."
+  price_taxes_profile:
+    name: "Tarief · Heffingen en btw per dagdeel (één regel JSON)"
+    description: "Laat dit leeg tenzij uw netbeheerder werkelijk een ander dag- en nachttarief aanrekent - in Vlaanderen is dat niet zo, de Fluvius-distributie is één tarief, en het vaste bedrag hierboven klopt. In Wallonië en Brussel is dat wél zo: ORES rekent 13,27 c/kWh overdag tegen 7,39 's nachts, AIESH 15,17 tegen 8,21, Sibelga 9,39 tegen 7,10. Geschreven als één regel JSON in precies dezelfde vorm als het vaste of dag/nacht-tarief hierboven, met dezelfde regel dat de periodes elk dagtype één keer moeten bedekken zonder gat en zonder overlap. ⚠️ DE BEDRAGEN HIER ZIJN ALLEEN DE HEFFINGEN, GEEN VOLLEDIGE PRIJS - de add-on telt ze op bij wat uw prijsbron publiceert, net zoals bij het vaste bedrag. Waarom het uitmaakt: een vast bedrag is in elk uur hetzelfde, verschuift dus elk uur evenveel en kan niet veranderen welk uur het goedkoopste is - en een nachttarief van het net is goedkoop in dezelfde uren waarin de markt goedkoop is, dus door het plat te slaan lijkt de dag vlakker dan hij is en weigert de add-on batterijcycli die zichzelf zouden terugverdienen. Vul dit in óf het vaste bedrag hierboven, niet allebei: de add-on weigert te starten als de twee elkaar tegenspreken."
  price_formula:
    name: "Tarief · Uw eigen tariefformule (één regel JSON)"
    description: "Alleen voor prijsbron custom_formula: de twee coëfficiënten van uw eigen contract, als één regel JSON. De tariefkaart van uw leverancier drukt de formule af als B x index + A - die twee getallen staan alleen op uw kaart, er bestaat nergens een publieke lijst van, en u bent de enige die ze kan lezen. Typ wat de kaart afdrukt, IN DE EENHEID DIE DE KAART GEBRUIKT: elke eenheidsomrekening en de btw-stap zijn het werk van de add-on, want dat zijn precies de twee plaatsen waar een mens stilzwijgend een factor 10, 100 of 1,06 verliest. Voorbeeld: {\"index\":\"epex_be\",\"resolution\":\"hourly\",\"factor\":0.102,\"offset\":1.00,\"units\":\"c_eur_per_kwh\",\"vat_pct\":6,\"card\":{\"month\":\"2026-09\",\"index_eur_per_mwh\":133.9905,\"expect_incl_vat\":15.55}}. ⚠️ HET BLOK card IS VERPLICHT EN MAAKT DIT VEILIG: uw kaart vermeldt ook de referentie-index die ze veronderstelt en de prijs die eruit volgt, dus de add-on berekent die prijs opnieuw uit uw getallen en START NIET als het resultaat niet klopt - met vermelding van het verschil. Dat vangt een verkeerde eenheid, btw die ontbreekt of dubbel geteld is, een omgewisseld cijfer, en de dure fout: nettarieven die in de offset verwerkt zitten en die de add-on er dan nog een tweede keer bovenop zou rekenen. ⚠️ EN DE GRENS DAARVAN, IN DEZELFDE ZIN: ze toetst uw coëfficiënten aan uw kaart, niet uw kaart aan de werkelijkheid - twee getallen van het verkeerde product kloppen onderling en komen er dus door. Alleen vaste getallen: er wordt geen enkele expressie geëvalueerd, en een onbekend veld wordt geweigerd in plaats van genegeerd."