adminandClaude Opus 5
c45893ffad
price_history.py's docstring states its rule unconditionally - "A store that
cannot persist now records nothing, and both of its answers say the same
thing" - and FCST-04 enforced it against `not self.ok` only, which is one
SYMPTOM: the durable volume is missing. `ok` is about the DIRECTORY, and a
read-only remount and a full disk both leave it True. Reproduced on 5059e28
against two real volumes, a /data bind-mounted read-only and a full tmpfs:
last_error = 'could not write ([Errno 30] Read-only file system)'
words = '2026-01-14 (24 points over 24 h); 2026-01-15 (24 points
over 24 h) [could not write (...)]'
yesterday()= series, 24 points
ON DISK = {}
`words` and `yesterday()` were describing two different stores, and the 24
points were gone on the next restart with nothing saying so - the
silently-forgetting cache that rule exists to refuse, reached by the condition
it did not name. No shipped path reaches it: /data is the Supervisor's durable
volume and this module is its only writer. The defect is that a guarantee the
module states about itself did not hold in one condition.
Route taken: `_remember()` refuses to retain what it could not write, and the
docstring's claim stands as written. It is now ONE derived predicate rather
than two places testing two symptoms. "Can this store persist?" cannot be
answered BEFORE the attempt - a directory that existed and was writable a
moment ago is not a write that completed - so it is answered after it, once,
by the only thing holding the evidence: `_save()` returns whether the file now
holds what memory holds. No volume is one False, an OSError is another.
`_remember()` keeps only what that one answer says was kept, and the
`not self.ok` test in `_remember()` is GONE rather than joined by a second one.
FCST-04's M4 and FCST-05's HIGH were the same shape, so a third cause now needs
no third branch.
What is undone is the MERGE, not the store. The state restored is the last one
that IS on disk, so a site whose volume fills at 14:00 goes on answering the
yesterday it wrote at 13:30 - that record survives a restart, so answering it
is not a promise the store cannot keep. It stops adding to it. The snapshot is
copy.deepcopy: a one-level copy shares the day record the merge rebinds
`points` on, and measured with one, a store holding 12 persisted points
answered 24 after a failed merge.
Not fatal, deliberately: §6 and this module's opening - a broken cache must not
be a broken controller, and an add-on that will not start because /data filled
up is a worse defect than this one. `_save()` reports and returns; the shipped
resolve_tariff() path still gives a provider plan with no §11.4 degradation.
What changed is that the failure is now acted on rather than only logged.
test_price_history.py section 5d drives it on two REAL failures with different
syscalls and different errnos - a directory where the file goes (os.replace,
EISDIR) and a volume moved out from under an open store (mkstemp, ENOENT) -
because the rule is enforced on the outcome and one cause would grade a
coincidence. DOCS.md's "where there is no /data" sentence is widened to the
condition the code now holds to.
MUTATION.md gains what M4 exposed: a mutation whose red is a TRACEBACK reports
however many checks ran before it and grades none after it. M4 first printed
1 FAIL; the true figure is 3. An f-string operand read `len(read.points)`, and
`.points` on a no_data raises `Absence` by design - why()'s rule arriving in
what a check PRINTS rather than in what it asserts. `npts()` is now beside
why(), and a red count is a lower bound until the run is seen to reach the end
of its section.
6 mutations, purged tree, every one RED on named checks, no survivors:
M1 self._days = before -> dict(self._days) +10 B 9 red
M2 _save() OSError handler returns True -1 B 9 red
M3 _save() returns True on `not self.ok` -1 B 3 red
M4 self._days = before -> self._days = {} -4 B 3 red
M5 copy.deepcopy -> dict -9 B 3 red
M6 `if not self.ok: return` back in _remember() +43 B 1 red
All 29 test files green. Nothing deployed; no option added; config.yaml and
app/ behaviour on a healthy /data untouched. No version number picked - that
is the open decision the Unreleased block names.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BwRLw7eKYj2byVdwB6kbjU
GoodWe RS485 Controller — Home Assistant add-on repository
Replaces a GoodWe battery inverter's vendor controller with a local one: holds net grid exchange at zero by emulating the inverter's smart meter over RS485, and runs the monthly battery maintenance cycle the vendor box was doing.
repository.yaml add-on repository metadata
goodwe_controller/ the add-on
config.yaml manifest + options schema (the per-site config form)
app/ the controller
control.py the control law — pure functions, no I/O
maintenance.py the monthly cycle state machine
hass.py Supervisor/Core API access
store.py persistent state in /data
mqtt.py optional status entities
web.py ingress UI — routes only, status and configuration
config_page.py the configuration page's markup, style and script
configui.py its field model, built from the Supervisor's own
schema + translations — owns no key, label or rule
selfconfig.py reading and writing this add-on's own options,
with the validate-first / compare-and-swap gate
main.py orchestration, heartbeat, failsafe behaviour
test_control.py runnable checks — no framework needed
test_maintenance.py runnable checks — walks a full cycle in fake time
DOCS.md the add-on's documentation tab
MUTATION.md how to run a mutation so the result means something
tools/mutation_run.sh the mutation harness - purges bytecode, then grades
tools/supervisor_selfapi_probe.py what the Supervisor really permits and
returns, run against its own release image
firmware/goodwe-master.yaml ESPHome config for the T-CAN485
estop/rs485_log.py optional RS485 e-stop / bus witness
docs/GoodWe-RS485-Field-Guide.pdf the guide techs carry (10pp, A4)
docs/build_guide.py its single source - rebuilds the HTML and PDF
FIELD-GUIDE.md how to edit and rebuild the guide
Picking this up after a break? Read HANDOVER.md first — current state,
what is known broken, and what to do next.
Install
Settings → Add-ons → Add-on store → ⋮ → Repositories → add
https://gittea.kammenstraatha.duckdns.org/admin/goodwe-addon
then install GoodWe RS485 Controller.
⚠️ The repository must be PUBLIC for this to work. Home Assistant clones it
anonymously; against a private repo the store shows nothing and gives no useful
error. If it must stay private, install locally instead: copy
goodwe_controller/ into the machine's /addons/ folder, then
ha store reload — it appears as a Local add-on.
⚠️ Bump version: in goodwe_controller/config.yaml for every change.
Supervisor keys the built image by that version, so without a bump it silently
reuses the old image and your fix appears not to work — on your bench and on
every client's machine.
Requires Home Assistant OS or Supervised. Add-ons cannot be installed on HA Container or Core.
Read this first
The inverter holds its last command forever. It has no meter-timeout of its own — a controller that dies mid-command leaves the battery running until a human intervenes. Measured on real hardware: 5 kW of discharge held for 113 seconds after a controller went silent.
Three layers exist because of that, and only the third covers the Home Assistant machine itself dying:
- ESP32 watchdog — no fresh setpoint for ~30 s → command 0 W, and keep commanding it.
- Wind-down before firmware updates — 0 W written before the update starts.
- RS485 e-stop (optional) — writes 0 W after 30 s of total bus silence.
Sites sold without the e-stop must have the acknowledgement in FIELD-GUIDE.md
§10 signed.
Development
The control law and the maintenance machine are pure Python with no Home Assistant imports, so they run anywhere:
cd goodwe_controller
python3 test_control.py
python3 test_maintenance.py
Both must pass before shipping any change. To prove a check bites - the way
almost every claim in this repository was established - mutate the module and
run tools/mutation_run.sh, which clears __pycache__ first. It is not
optional: a same-size edit reverted inside one second leaves CPython reusing the
old bytecode, and the run grades code that is not there. goodwe_controller/MUTATION.md
has the mechanism, the measurement, and what the flags do not do. They are not unit-test theatre —
each assertion corresponds to a rule whose absence produced an observed failure
on real hardware, and the comments in control.py say which.
Compatibility
Check the serial number, not the model name. Characters 6-8 of the serial are the platform tag:
| tag | platform | verdict |
|---|---|---|
ESU EMU ESA BPS BPU EMJ IJL |
105 — ES/EM/BP, AA55-era meter bus | supported |
SPB SPN |
745 — SBP G2 (GW…-SBP-20) |
no |
ESN ESC |
745 — ES G2 (GW…-ES-20) |
no |
ETU EHU BTU … |
205/745/753 — ET/EH/BT hybrids | no |
SDT DST MSU NSU … |
PV-only inverters — no battery to control | no |
A "-20" or "G2" suffix means a different platform with a different meter
protocol. The tags come from the goodwe library's PLATFORM_105_MODELS, which
is also what Home Assistant's own integration uses to pick a protocol.
- GoodWe ES / BP family inverters (AA55 / RS485 meter-bus generation)
- The protocol is reverse-engineered. There is no vendor contract, and a firmware change on GoodWe's side could break every installation at once. Say so when you sell it.