Compare commits

..
6 Commits
Author SHA1 Message Date
ems-agentandClaude 29480fda47 EV-05: car Solar mode (spare sun to the car, Batteries or Car first, cut first for the peak)
infra-pin / fresh (pull_request) Waiting to run
checks / unit (pull_request) In progress
Solar charges the car from the signed spare sun (car + battery charge - grid
import), less the batteries' room (Batteries first) and the sun kept back,
whole amps rounded down, at most one change per 30 s and only on 1 A. It
starts after ev_start_min of enough sun, holds 6 A for ev_pause_min, then 0 A.
Auto phases through EV-04's safe sequence (4.5 kW / 3 min up, 4.0 kW / 5 min
down, one switch per 10 min). What the peak guard would ask the batteries for
is taken off the car first, at once. Every way out of Solar ends at 0 A,
written once; at shutdown before the inverters go to 0 W.

- app/carmode.py: SolarPlan (pure) and SolarWriter (ManualWriter's one write
  site, its sequence and watch); spare_w, car_target_w, amps_for.
- app/ctl_car.py: Solar inputs, the cut, the solar kWh, EV-15's grace for
  Solar's own 0 A, no "set by the car" for Solar; main.py: shutdown order.
- Home card, HA select.goodwe_car_sun_first, sensor car_today_solar_kwh,
  three options with defaults, strings EN/NL, DOCS, DECISIONS, CHANGELOG.
- test_ev05.py, test_ev05_long.py, tools/ev05_sun.py; test_ev03/ev04 checks
  that pinned "Solar is refused" / "three entities" updated.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-17 23:54:06 +01:00
admin 9fdce023e9 Merge pull request 'EV-15: the add-on's own phase change at the peak reserve raises no false alarm' (#262) from EV-15 into release/1.0
infra-pin / fresh (push) Successful in 1s
2026-11-17 17:15:51 +01:00
glenn schrooyenandClaude Opus 5.5 7788543e09 EV-15 review: reflow the _car_own_pause docstring (one 123-char line)
checks / unit (pull_request) Successful in 22m10s
infra-pin / fresh (pull_request) Successful in 1s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC
2026-11-17 16:51:41 +01:00
glenn schrooyenandClaude 6d7046fc45 EV-15 round 2: the grace opens when the 0 A write is sent
checks / unit (pull_request) Successful in 20m56s
infra-pin / fresh (pull_request) Successful in 1s
The writer runs beside the cycle and the car can stop before the write
returns, so no sequence existed yet and the latch set. Window now opens at
send (zero_sent_at), cleared on return; ends on another writer in the tail too.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-17 15:24:30 +01:00
glenn schrooyenandClaude 07f703d1bc EV-15: test_ev15 guards its own indexing (named absence)
checks / unit (pull_request) Successful in 21m47s
infra-pin / fresh (pull_request) Successful in 1s
Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-17 13:39:11 +01:00
glenn schrooyenandClaude 2cfbc4aec8 EV-15: the add-on's own phase change at the peak reserve raises no false alarm
While the add-on holds the car at 0 A for its own phase change, the car's
figure had no corroboration (not charging), so nothing was explained and the
peak-floor alarm fired once. For grading only, the car's fresh, not stuck
figure now stands in for that sequence (bounded: its own waits plus one
corroboration window), ending at once on Off, Stop, shadow, unplug, another
writer or a refused write. car_exclude, the claim, floor and writes unchanged.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-17 13:26:56 +01:00
30 changed files with 3856 additions and 115 deletions
+2 -1
View File
@@ -49,10 +49,11 @@ SERIAL="test_loop.py test_freeze.py test_safety87.py"
# safety119 704, opt34 515, safety126 402, safety125 388, safety126b 364,
# modes_p3 377, safety94 360, modes_p4c 291, modes_p4b 238, tariff24_weather 235,
# modes_p4d 196, price_run_fixes 197, safety103 189, safety90 185, safety97 163.
# EV-05: ev05_long ~500 and ev05 ~375 alone (the Solar simulations).
# CI-18 split test_modes_p4, test_safety126 and test_safety125 so no one file
# is much over 400 s; test_opt34 and test_opt36 already fan out inside, and
# test_safety119 part 4 is one coupled block, so those three stay whole.
HEAVY="test_opt36.py test_safety119.py test_opt34.py test_safety126.py test_safety125.py test_safety126b.py test_modes_p3.py test_safety94.py test_modes_p4c.py test_modes_p4b.py test_tariff24_weather.py test_modes_p4d.py test_safety125b.py test_price_run_fixes.py test_safety103.py test_safety90.py test_safety97.py test_peakguard.py test_opt20.py test_safety81.py"
HEAVY="test_opt36.py test_safety119.py test_ev05_long.py test_opt34.py test_ev05.py test_safety126.py test_safety125.py test_safety126b.py test_modes_p3.py test_safety94.py test_modes_p4c.py test_modes_p4b.py test_tariff24_weather.py test_modes_p4d.py test_safety125b.py test_price_run_fixes.py test_safety103.py test_safety90.py test_safety97.py test_peakguard.py test_opt20.py test_safety81.py"
#
JOBS=${CI_JOBS:-10}
cd "${TESTS_DIR:-/w/goodwe-addon/goodwe_controller}"
+5
View File
@@ -1,5 +1,10 @@
# Changelog
### Not in a release yet
- When the add-on changes the car's phases while the batteries are at the peak reserve, there is no longer a false "Battery stopped limiting the peak" for a moment ([[EV-15]]).
- The car can charge from spare sun only (Solar mode), with the batteries or the car first, and it is cut first when the 15-minute period heads over the peak limit. Three new options with defaults ([[EV-05]]).
## 0.24.0
**A minor bump: the add-on can now charge the car (Manual mode), and a car that alone takes the batteries to the peak reserve no longer raises a false peak alarm. Two new options were added, both with defaults, and none needs setting.**
@@ -120,6 +120,23 @@ up to 1.8 kW; the 40 Wh floor fixes that.)
the gaps seen on the rig, 150 to 250 s at 50 s sampling, and shorter than a
quarter) and a gap does not restart the 10 s
on-count. `car_explains`, which the alarms read, has no hold.
- **Our own phase change is not a reason to alarm** (EV-15). Rig, twice: at the
reserve, with the car covering, the add-on's 3 -> 1 switch set the car to 0 A.
A car that is not charging has no corroboration (`CarTracker._corr_note` clears
the window, `corroborated` is False), so `car_alarm_w()` was None, the car
explained nothing and `_car_need_excl` latched for the quarter: one
PEAK_GUARD_FLOOR_LIMITED and one `goodwe_peak_soc_floor`. Now, only for grading
(`car_cycle`), `ctl_car._car_own_pause` lets the car's fresh, not stuck figure
(`CarTracker.car_w_paused`, 0 W while paused) stand in without corroboration:
from the moment our 0 A write is SENT (`zero_sent_at`: the cycle runs beside
the writer and the car stops before the write returns), until the current is
set again, at most
`OWN_PAUSE_MAX_S` (85 s, the sequence's own waits), then at most one
corroboration window (60 s). It ends at once on Off, Stop, shadow, unplug,
another writer, or a refused select or write (`seq["failed"]`). The energy it
drew in the pause is kept apart (`ws_p`), so `car_exclude`, the guard's
input, the claim, floor and writes are unchanged. A house overload still fails
the test without the car, so it alarms as on Off.
- **Our own write is ours until its mute ends** (EV-12). The mute of the tracker's
own detector opens before the write and runs 15 s from when it returns, because
the read-back reaches the cycle while the write still waits for it.
@@ -0,0 +1,54 @@
# EV-05 — Solar mode: spare sun to the car
The design is `reports/EV-01-design-report.md` (sections 2 to 5, decisions 2 and
5) and the EV-05 brief v3 (owner answers Q1 and Q4, 2026-11-17). This record
keeps what the code had to decide.
## Where it lives
`carmode.SolarPlan` decides (pure, monotonic clock): what current, on what
phases. `carmode.SolarWriter` makes the charger match it. It is a subclass of
`ManualWriter`, so the write, the read-back, the phase sequence and the
other-writer watch are Manual's and there is still one `write_current` and one
`write_phases` call in `app/` (test_ev04.py's AST check). `ctl_car` builds the
inputs (`car_sun_inputs`) and runs the writer in the same background task.
## The rules the brief left open
- **Entering Solar starts at 0 A.** Choosing Solar, a restart in Solar, the
charger or Home Assistant coming back, a charger error or a stuck reading
clearing, and control starting again all reset the plan: 0 A if the charger
shows more, then the start rule. Switching from Manual to Solar therefore
pauses a Manual charge for the start dwell. Simple and on the safe side.
- **The peak cut is what the guard would ask the batteries for.** The excess is
taken off the car only when the guard is engaged and wants a discharge
(`wanted_w > 0`), and by `min(excess, wanted)`. Batteries that only stop
charging in a cloud's first seconds are not "asked", so a cloud does not cut
the car. A partial cut caps the car for the rest of that 15-minute period.
- **The 4.0 to 4.14 kW band on 3 phases.** 3 phases need 4.14 kW at 6 A, the
switch back to 1 phase is under 4.0 kW. Inside that band the car holds 6 A on
3 phases with no pause count (the hysteresis the design chose). Under 4.0 kW
the down-switch comes after 5 minutes; if the 10-minute gap blocks it, the
pause rule does instead.
- **A phase switch also waits for the 30 s write rule**, so the current set
after a switch is never sooner than 30 s after the one before it.
- **The meter's age.** The spare is not computed from a meter reading older
than `stale_input_s`, also when `meter_max_age_s` (P1) is longer.
- **A stale, stuck or not corroborated charging car makes the spare unknown**:
hold, then 0 A after *Pause after*. A paused or idle car with a fresh reading
counts 0 W (`car_w_trusted` is None outside mode3 C).
- **A stuck reading's 0 A is written whatever the frozen read-back says**, since
that read-back means nothing then. Every other exit skips the write when the
charger already shows 0 A, and never writes over another writer.
- **The guard's alarm path** uses the Solar car like Manual's
(`car_alarm_w`), and Solar's own 0 A (pause, cut, phase change) gets EV-15's
bounded grace (`_car_solar_pause`). A Solar quarter is never banked as "set
by the car", and Solar shows no *Car over the peak limit*.
- **Shadow mode** runs the plan without writing, so the card says what it would
set; the charger got its one 0 A when shadow mode came on.
## Solar kWh
Per cycle in Solar: `min(car power, max(0, spare - room))` Batteries first,
`min(car power, max(0, spare))` Car first; never above today's kWh; reset at the
day change; kept in the store (`car_sun`).
+64 -10
View File
@@ -256,7 +256,10 @@ The label and description each setting shows on the Configuration tab, in tab or
| Car charger | Charger limit (A) | `ev_max_a` | The most current the charger may ever be asked for. Never above what the charger reports. Lower it for a weaker fuse or cable. |
| Car charger | Phases | `ev_phases` | How many phases the charger may use: 1, 3, or 1 and 3 (auto). |
| Car charger | Batteries help with the peak | `ev_batt_cover` | While the car charges. On: the batteries cover it down to the peak reserve. Off: the peak guard leaves the car out, so the car alone can set the peak. |
| Car charger | Mode after a restart | `ev_mode_start` | Keep the last mode, or start in Off. A restart never changes the charger's current. |
| Car charger | Mode after a restart | `ev_mode_start` | Keep the last mode, or start in Off. In Solar a restart sets the charger to 0 A first, other modes leave its current. |
| Car charger | Sun kept back (W) | `ev_margin_w` | Solar: this much spare sun is never given to the car. |
| Car charger | Start after (minutes) | `ev_start_min` | Solar: the car starts after this long with enough spare sun. |
| Car charger | Pause after (minutes) | `ev_pause_min` | Solar: with too little sun the car holds 6 A this long, then pauses. |
| Advanced | Start control on boot | `auto_start` | Off by default. Leave it off until the site is commissioned, so someone presses Start after each restart. |
| Advanced | Control gain | `gain` | How much of the remaining error control corrects each cycle. Measured on real hardware, do not raise it. |
| Advanced | Largest change per cycle (W) | `slew_w` | How far the command may move in one cycle. 0 follows “Inverter rating” and is recommended. |
@@ -3278,9 +3281,10 @@ it.
### Car charger
The add-on can drive your car charger and shows it on **Home**, on a *Car* card.
The card has two modes in this version: **Off** (the add-on only reads the
charger and writes nothing) and **Manual** (the add-on sets the current and the
phases you choose). Solar and Night modes come in later versions.
The card has three modes in this version: **Off** (the add-on only reads the
charger and writes nothing), **Manual** (the add-on sets the current and the
phases you choose) and **Solar** (the car charges from spare sun only). Night
mode comes in a later version.
| option | meaning |
|---|---|
@@ -3290,6 +3294,9 @@ phases you choose). Solar and Night modes come in later versions.
| `ev_phases` | `1`, `3` or `auto` (1 and 3). |
| `ev_batt_cover` | On (the default): the batteries help cover the car down to the peak reserve. Off: the car is left out of what the peak guard protects. |
| `ev_mode_start` | `keep` (the default) or `off`: the mode after a restart. |
| `ev_margin_w` | Solar: spare sun never given to the car, 0 to 1000 W (default 100). |
| `ev_start_min` | Solar: minutes of enough sun before the car starts, 1 to 30 (default 2). |
| `ev_pause_min` | Solar: minutes the car holds 6 A with too little sun before it pauses, 1 to 30 (default 5). |
**What the Car card shows.** The state (Charging, Connected waiting, No car
connected, Car is full, Charger not reachable), the power and current, and the
@@ -3320,7 +3327,46 @@ checks within 10 seconds that the charger took it.
current again only if the charger shows a different one.
- Off writes nothing, ever.
**The car is never slowed for the peak limit.** A Manual charge goes on whatever
**Solar mode.** Choose *Solar* on Home (or `Solar` on `select.goodwe_car_mode`)
and where spare sun goes first: **Batteries** or **Car** (`select.goodwe_car_sun_first`).
Both apply at once, with no restart.
- *Spare sun* is solar production less the house, measured without a solar
sensor: the car's power, plus what the batteries charge, less what the grid
gives. A grid charge of the batteries, or batteries giving more than the house
uses, is never spare sun.
- *Batteries first*: the car gets what is left after the full rating of every
battery that may still charge (switched on, not refusing, not full), less
*Sun kept back*. So the car gets sun only when the batteries charge at full
power or are full. *Car first*: the car gets the spare sun less *Sun kept
back*, and the batteries charge with what it leaves.
- The current is whole amps, rounded down, from 6 A to the charger limit. It
changes at most once per 30 seconds, and only by 1 A or more.
- The car starts after *Start after* (2 minutes) of sun for at least 7 A. With
too little sun it holds 6 A for *Pause after* (5 minutes), from the batteries
where they can, then pauses at 0 A: the card says *Waiting for sun*.
- With `ev_phases` `auto` a start goes on 1 phase. It moves to 3 phases after
3 minutes at 4.5 kW or more, and back to 1 phase after 5 minutes under 4 kW,
at most once per 10 minutes, always through the safe phase steps above. A car
that draws one phase while three are allowed is counted on one phase.
- **The car is cut first for the peak limit.** When the 15-minute period heads
over the limit and the peak guard would ask the batteries for power, that is
taken off the car first, down to 0 A at once. A Solar charge never sets the
month's peak.
- **Every way out of Solar leaves the charger at 0 A**, written once: a stop or
restart of the add-on (before the inverters go to 0 W), stopping control, a
safety stop, shadow mode turned on, choosing Off, an unplugged car, a charger
error or a stuck reading. After the charger or Home Assistant was away, the
add-on first sets 0 A, then starts again by the rules. A meter that stops
gives a hold for *Pause after*, then 0 A. Choosing Manual leaves it to Manual.
- Another writer stops the add-on's writes after 30 seconds, with an amber row
and a warning, until you press the mode again or the charger shows the
add-on's value again.
- The card shows *{kWh} charged today, {kWh} from the sun*, also as
`sensor.goodwe_car_today_solar_kwh`. Only the sun the car could take counts,
not the battery or grid share of a hold, and not Manual.
**The car is never slowed for the peak limit in Manual.** A Manual charge goes on whatever
the 15-minute peak does. With the default `ev_batt_cover` on, the batteries help
cover it down to the peak reserve; a 3-phase 16 A charge (11 kW) can empty two
batteries to the reserve in about 1.5 hours, and the month's peak then rises by
@@ -3364,9 +3410,10 @@ charger* shows for an hour after a change. That is expected while you migrate.
automation **off** (do not delete it). On the card choose **Manual** with the
current your helper held (`input_number.ev_manual_current`). Plug in and check
the current on the card and on the charger's display.
3. On the next sunny day, choose Solar, with *spare sun goes first to* set as
your priority switch was. (Solar comes in a later version; until then keep
Manual or Off.)
3. On the next sunny day, choose **Solar**, with *Spare sun goes first to* set
as your priority switch was (*Batteries* or *Car*), and *Sun kept back* as
your automation's margin. Watch the card's *Why* through a cloud: the car
holds 6 A for 5 minutes, then waits for the sun.
4. Keep your Home Assistant helpers for a week. To go back, set the add-on mode
to Off and switch the automation on. After that you can delete the helpers and
the automation.
@@ -3377,8 +3424,8 @@ off before you choose Manual, and the add-on off (mode Off) before you turn the
automation on.
**Home Assistant entities.** With MQTT the add-on adds the sensors
`goodwe_car_power`, `goodwe_car_state` and `goodwe_car_today_kwh`, and the three
controls named above. A saved ("retained") command is never applied, so a
`goodwe_car_power`, `goodwe_car_state`, `goodwe_car_today_kwh` and
`goodwe_car_today_solar_kwh`, and the four controls named above. A saved ("retained") command is never applied, so a
restart of Home Assistant cannot change the charger.
### Site
@@ -3516,6 +3563,13 @@ their full power. The add-on never slows the car, so this is information, not an
alarm. It is raised once per charging session. To stay under the limit, lower the
current.
### Charger error, car paused
In Solar mode the charger reports an error, so the add-on set the car to 0 A
and writes nothing more until the error clears. Then the car starts again by
the Solar rules. Check the charger itself. The notification goes by itself when
the error clears.
### For installers: notifications
A fixed tariff beside the price service raises no notification: it is the
+519 -6
View File
@@ -1,4 +1,5 @@
"""EV-04: the car charger's Manual mode, the one place the add-on WRITES to it.
"""EV-04 and EV-05: the car charger's Manual and Solar modes, the one place the
add-on WRITES to it.
Pure but for the driver it is handed: no clock of its own (`now` is monotonic
seconds from the caller), no Home Assistant, no store. DECISIONS/EV-04-manual-
@@ -24,21 +25,38 @@ THE RULES, each tested in test_ev04.py:
mode or a value again.
* A charger that comes back after being unavailable gets the setting again only
if its read-back differs.
EV-05, SOLAR (`SolarPlan` decides, `SolarWriter` writes; test_ev05.py,
DECISIONS/EV-05-solar-mode.md): the car gets the spare sun, `spare = car +
battery charge - grid import`, less the batteries' room (Batteries first) and
the margin. Whole amps rounded down, at most one write per 30 s and only on a
1 A change. Start after `ev_start_min` of enough sun, hold 6 A for
`ev_pause_min` below it, then 0 A. The peak guard's excess is taken off the
car first, at once. Every way out of Solar leaves the charger at 0 A, written
once. Both writers share `ManualWriter._write`, so there is still one
`write_current` and one `write_phases` call in the add-on.
"""
from __future__ import annotations
import logging
import math
from . import chargers as CH
_LOG = logging.getLogger("goodwe")
OFF, MANUAL = "off", "manual"
#: the modes this card offers. Solar and Night are later cards (EV-05, EV-02).
MODES = (OFF, MANUAL)
OFF, MANUAL, SOLAR = "off", "manual", "solar"
#: the modes offered. Night is a later card (EV-02).
MODES = (OFF, MANUAL, SOLAR)
#: Home Assistant's select labels, English and pinned.
MODE_LABELS = {OFF: "Off", MANUAL: "Manual"}
MODE_LABELS = {OFF: "Off", MANUAL: "Manual", SOLAR: "Solar"}
#: EV-05: where the spare sun goes first (`select.goodwe_car_sun_first`).
KEY_FIRST = "car_sun_first"
FIRST_BATT, FIRST_CAR = "batteries", "car"
FIRSTS = (FIRST_BATT, FIRST_CAR)
FIRST_LABELS = {FIRST_BATT: "Batteries", FIRST_CAR: "Car"}
DEFAULT_FIRST = FIRST_BATT
START_KEEP, START_OFF = "keep", "off"
KEY_MODE, KEY_A, KEY_PHASES = "car_mode", "car_current", "car_phases"
@@ -125,6 +143,8 @@ class ManualWriter:
self.phase_fails = 0 # phase selects the charger did not take
self.phases_gave_up = False
self.undone = 0 # sequences undone before the select
self.phase_done_at = None # EV-15: our phase change ended well then
self.zero_sent_at = None # EV-15: our 0 A write is out, not yet back
# ------------------------------------------------------------------ user
def user_changed(self) -> None:
@@ -292,7 +312,14 @@ class ManualWriter:
async def _begin(self, drv, r, cur, n, now, tracker) -> None:
"""Step 1 of the safe sequence: 0 A. A charger that does not take it
stops the sequence before the phases are touched."""
ok = await self._write(drv, 0.0, cur, now, tracker)
self.phase_done_at = None
# EV-15: the car stops while the write waits for its read-back, and the
# cycle runs beside it: the window opens when the write is SENT.
self.zero_sent_at = now
try:
ok = await self._write(drv, 0.0, cur, now, tracker)
finally:
self.zero_sent_at = None
if not ok:
self._failed(now)
return
@@ -336,6 +363,7 @@ class ManualWriter:
self.log.append(("phases", q["n"], now, ok))
q["stage"], q["t1"] = "settle", self.last_done # from its return
if not ok:
q["failed"] = True # EV-15: no grace for the alarm
# The charger did not take it: the car gets its current back
# on the old phases after the same SETTLE_S as a taken select
# (HA may have taken it and only the read-back be late), and
@@ -356,7 +384,10 @@ class ManualWriter:
# still wanted, and one that is in place is adopted.
self.seq, self.rev_applied, self.reapply = None, None, False
self.fails, self.blocked = 0, False
if not q.get("failed"):
self.phase_done_at = self.last_done # EV-15
return
q["failed"] = True # EV-15: a refused write ends it
q["tries"] += 1
if q["tries"] >= MAX_TRIES:
# Left at 0 A is the safe side; the next reading re-applies.
@@ -365,3 +396,485 @@ class ManualWriter:
self.rev_applied = None
return
q["t1"] = now - SETTLE_S + 5.0 # again in 5 s
# =========================================================================== #
# EV-05: Solar. `SolarPlan` decides what the car should get, `SolarWriter`
# makes the charger match it through ManualWriter's one write site.
# =========================================================================== #
MIN_A = CH.MIN_A
VOLTS = 230.0 # per phase: the amps a figure in watts is worth
SOLAR_WRITE_S = 30.0 # at most one current change per this
SOLAR_STEP_A = 1.0 # ... and only on a change of this or more
UP_W, UP_S = 4500.0, 180.0 # auto phases: to 3 at this for this long
DOWN_W, DOWN_S = 4000.0, 300.0 # ... back to 1 under this for this long
ONE_PHASE_S = 10.0 # one phase drawing while 3 are allowed this long
ONE_PHASE_MIN_W = 500.0 # ... with the car drawing at least this
def _num(v):
try:
f = float(v)
except (TypeError, ValueError):
return None
return f if math.isfinite(f) else None
def spare_w(car_w, batt_w, grid_w):
"""The spare sun, signed and not clipped: what the car takes, plus what the
batteries charge, less what the grid gives. `batt_w` is the add-on's own
battery figure (discharge positive) and `grid_w` the meter (import
positive), so this is `car - batt - grid` = solar production less the
house. A grid charge of the batteries, or batteries giving more than the
house uses, is never spare sun. None when a figure is missing or not a
number."""
c, b, g = _num(car_w), _num(batt_w), _num(grid_w)
if c is None or b is None or g is None:
return None
return c - b - g
def car_target_w(spare, room_w, margin_w, first):
"""What the car may take: Batteries first `spare - room - margin`, Car
first `spare - margin`. None while the spare is unknown."""
s = _num(spare)
if s is None:
return None
room = float(room_w or 0.0) if first == FIRST_BATT else 0.0
return s - room - float(margin_w)
def amps_for(car_w, n, clamp=None):
"""Whole amps for `car_w` on `n` phases, ROUNDED DOWN, never above the
clamp. None for a figure that is not a number."""
w = _num(car_w)
if w is None or n not in (1, 3):
return None
a = math.floor(w / (VOLTS * n) + 1e-9)
hi = CH.ENTITY_MAX_A if _num(clamp) is None else float(clamp)
return float(max(0, min(a, math.floor(hi))))
def solar_option(opts: dict, key: str) -> float:
"""`ev_margin_w`, `ev_pause_min` or `ev_start_min` as a number, the shipped
default when it is not one (the validator refuses it anyway)."""
v = _num((opts or {}).get(key))
return float(CH.EV_OPTION_DEFAULTS[key]) if v is None else v
class SunInputs:
"""One cycle's inputs for Solar, built by the Controller."""
def __init__(self, target_w=None, hold=False, cut_w=0.0, car_w=None,
key=None, auto=True, fixed_n=1, start_s=120.0,
pause_s=300.0, spare_w=None, room_w=0.0, margin_w=100.0,
first=DEFAULT_FIRST):
self.target_w, self.hold, self.cut_w = target_w, hold, cut_w
self.car_w, self.key, self.auto, self.fixed_n = car_w, key, auto, \
fixed_n
self.start_s, self.pause_s = start_s, pause_s
self.spare_w, self.room_w, self.margin_w = spare_w, room_w, margin_w
self.first = first
class SolarPlan:
"""What Solar wants set, one `step()` per cycle. Pure: monotonic `now` from
the caller and no driver, so in shadow mode it runs the same and the card
says what it would set. `a` is the current wanted (0: paused), `n` the
phases it is meant for."""
def __init__(self, n=1):
self.reset(n)
def reset(self, n=1, why="paused"):
self.a = 0.0
self.n = n if n in (1, 3) else 1
self.set_at = None # when `a` last changed (the 30 s rule)
self.ok_since = None # enough sun to start, since
self.low_since = None # under 6 A worth, holding 6 A, since
self.unknown_since = None # the spare cannot be measured, since
self.up_since = self.down_since = None
self.cap_a = self.cap_key = None # the peak cut, for this period
self.why = self.pause_why = why
self.target_w = None
def _pause(self, why):
self.a, self.set_at = 0.0, None
self.ok_since = self.low_since = self.unknown_since = None
self.up_since = self.down_since = None
self.why = self.pause_why = why
def _gate(self, now) -> bool:
return self.set_at is None or now - self.set_at >= SOLAR_WRITE_S
def _switch(self, n, target_w, now, clamp):
self.n = n
a = amps_for(target_w, n, clamp) or 0.0
if a >= MIN_A:
self.low_since = None
elif self.low_since is None:
self.low_since = now
a = max(a, MIN_A)
if self.cap_a is not None:
a = max(MIN_A, min(a, self.cap_a))
self.a, self.set_at = a, now
self.up_since = self.down_since = None
self.why = "running"
def step(self, now, *, target_w, n_calc, auto, fixed_n, clamp,
start_s, pause_s, hold=False, cut_w=0.0, car_w=None, key=None,
gap_ok=True):
if key != self.cap_key:
self.cap_a = self.cap_key = None
if hold: # readings late, under the stale bound
return
self.target_w = target_w
# The peak guard's excess comes off the car first, at once (no 30 s
# rule, no hold). Nothing starts while the period heads over the aim.
if cut_w and cut_w > 0.0:
self.ok_since = None
if self.a > 0.0:
base = self.a * VOLTS * n_calc
cw = _num(car_w)
if cw is not None:
base = min(base, cw)
new = amps_for(base - float(cut_w), n_calc, clamp)
if new is None or new < MIN_A:
self._pause("cut")
elif new < self.a:
self.a, self.set_at, self.why = new, now, "cut"
self.cap_a, self.cap_key = new, key
return
if target_w is None: # the sun cannot be measured: hold, then 0 A
self.ok_since = None
if self.a > 0.0:
if self.unknown_since is None:
self.unknown_since = now
if now - self.unknown_since >= pause_s:
self._pause("unknown")
else:
self.why = "unknown"
return
self.unknown_since = None
hi = None if _num(clamp) is None else math.floor(float(clamp))
if self.a <= 0.0: # paused: the start rule
n0 = 1 if auto else fixed_n
if target_w >= (MIN_A + 1.0) * VOLTS * n0:
if self.ok_since is None:
self.ok_since = now
self.why = "start"
if now - self.ok_since >= start_s:
a = amps_for(target_w, n0, clamp)
if a is not None and self.cap_a is not None:
a = min(a, self.cap_a)
if a is not None and a >= MIN_A:
self.a, self.n, self.set_at = a, n0, now
self.ok_since = self.low_since = None
self.up_since = self.down_since = None
self.why = "running"
else:
self.ok_since = None
self.why = self.pause_why
return
if hi is not None and self.a > hi: # the clamp came down
if hi < MIN_A:
self._pause("paused")
return
self.a, self.set_at = float(hi), now
if auto: # auto phases, by their own dwells
if self.n == 1:
self.down_since = None
if target_w >= UP_W:
self.up_since = self.up_since if self.up_since is not None \
else now
else:
self.up_since = None
if self.up_since is not None and now - self.up_since >= UP_S \
and gap_ok and self._gate(now):
self._switch(3, target_w, now, clamp)
return
else:
self.up_since = None
if target_w < DOWN_W:
self.down_since = self.down_since \
if self.down_since is not None else now
else:
self.down_since = None
if self.down_since is not None \
and now - self.down_since >= DOWN_S and gap_ok and self._gate(now):
self._switch(1, target_w, now, clamp)
return
want = amps_for(target_w, n_calc, clamp)
if want is not None and want >= MIN_A:
self.low_since = None
if self.cap_a is not None:
want = min(want, self.cap_a)
self.why = "running"
if abs(want - self.a) >= SOLAR_STEP_A and self._gate(now):
self.a, self.set_at = want, now
return
if auto and self.n == 3 and target_w >= DOWN_W:
# Inside the phase hysteresis (4.0 kW to 6 A x 690 W): 3 phases at
# 6 A stand, as the switch rule says; no pause count.
self.low_since = None
self.why = "running"
if self.a != MIN_A and self._gate(now):
self.a, self.set_at = MIN_A, now
return
if self.low_since is None:
self.low_since = now
self.why = "hold"
if now - self.low_since >= pause_s:
self._pause("paused")
return
if self.a != MIN_A and self._gate(now):
self.a, self.set_at = MIN_A, now
class SolarWriter(ManualWriter):
"""What Solar does to the charger, one `step()` per cycle. It shares
ManualWriter's write, phase sequence and other-writer watch; what differs
is that every way out ends at 0 A, written once, and that an interrupted
phase change is never undone to the old current."""
def __init__(self):
super().__init__()
self.plan = SolarPlan()
self.engaged = False # Solar has run since it was chosen
self.reinit = True # start again from 0 A and the start rule
self.out = False # not writing: the 0 A has been tried
self.stand = False # no car: the standing 0 A has been tried
self.fault = None # "error" | "stuck" while it holds
self.fault_done = False
self.warned = False # the charger error warning, once
self.single = False # a one-phase car on a 3-phase allowance
self._one_since = None
self.zero_at = None # EV-15: our own latest 0 A, sent then
self.sent_a = None # the current we last decided to write
# ------------------------------------------------------------------ help
def _mark(self, r, now) -> None:
"""A car that draws one phase while 3 are allowed is a one-phase car
for the session: the sun arithmetic then uses 1 phase."""
if r.state == "A":
self.single, self._one_since = False, None
return
drawing = [x for x in (r.current_a or ()) if x >= CH.IDLE_A]
one = (r.phases_allowed == 3 and r.charging is True
and r.power_w is not None and r.power_w >= ONE_PHASE_MIN_W
and len(r.current_a or ()) >= 3 and len(drawing) == 1)
if not one:
self._one_since = None
return
if self._one_since is None:
self._one_since = now
if now - self._one_since >= ONE_PHASE_S and not self.single:
self.single = True
_LOG.info("The car draws one phase while three are allowed, so "
"the add-on counts one phase for this charge.")
def _watch(self, cur, now) -> None:
"""As Manual's, and in Solar the hold is a warning: the add-on stops
writing until you press the mode or the read-back matches again."""
was = self.hold
super()._watch(cur, now)
if self.hold and not was:
_LOG.warning("Something else changes the charger, so the add-on "
"stops writing to it: CHARGER_OTHER.")
@property
def n_calc(self) -> int:
return 1 if self.single else self.plan.n
def amps_out(self, clamp) -> float:
"""The plan's current, never above the clamp; 0 when under 6 A."""
a = float(self.plan.a)
if _num(clamp) is not None:
a = min(a, float(math.floor(float(clamp))))
return a if a >= CH.MIN_A else 0.0
def user_changed(self) -> None:
"""As Manual's, and Solar says its current again (another writer's
hold is lifted by pressing the mode)."""
super().user_changed()
self.sent_a = None
async def _zero_once(self, drv, cur, now, tracker, force=False) -> None:
"""One try of 0 A on the way out. Never over another writer, and not
when the charger already shows 0 A (unless the reading is stuck, so
its 0 A means nothing: `force`)."""
if self.hold or (not force and cur is not None and cur <= TOL_A):
return
self.zero_at, self.sent_a = now, 0.0
await self._write(drv, 0.0, cur, now, tracker)
def _leave(self) -> None:
self.engaged, self.seq, self.would = False, None, None
self.out = self.stand = False
self.fault, self.fault_done = None, False
self.reinit = True
self.sent_a = None
self.plan.reset(self.plan.n)
def _plan_step(self, sun, now, clamp) -> None:
gap = self.last_switch is None or now - self.last_switch >= PHASE_GAP_S
self.plan.step(
now, target_w=sun.target_w, hold=sun.hold, n_calc=self.n_calc,
auto=sun.auto and not self.single,
fixed_n=1 if self.single else sun.fixed_n, clamp=clamp,
cut_w=sun.cut_w, car_w=sun.car_w, key=sun.key,
start_s=sun.start_s, pause_s=sun.pause_s,
gap_ok=gap and not self.phases_gave_up)
# ------------------------------------------------------------------ step
async def step(self, drv, r, *, mode, sun, clamp, now, tracker, writing,
status, clock=None):
"""One cycle. `sun` is `SunInputs`; `writing` is False in shadow mode,
while control is stopped, under a safety stop and while stopping."""
self._clock = clock or (lambda: now)
if r is None or not r.available:
self.was_available = False # nothing is tried while it is down
return
if self.last_done is not None and tracker is not None \
and tracker.obs_at is not None \
and tracker.obs_at <= self.last_done:
return
self._mark(r, now)
if not self.was_available:
self.was_available = True
self.reinit = True # back: 0 A first, then the rules
cur = r.allowed_a if r.allowed_a is not None else r.setpoint_a
if mode != SOLAR:
self.would = None
if not self.engaged:
return
if mode != MANUAL: # Off: 0 A once, then nothing
self.seq = None
await self._zero_once(drv, cur, now, tracker)
self._leave() # Manual writes its own current
return
self.engaged = True
if sun is None:
return
if not writing:
# Shadow, Stop, a safety stop, stopping: 0 A once, then nothing.
# The plan goes on, so the card says what it would set.
self.seq = None
if not self.out:
self.out = True
await self._zero_once(drv, cur, now, tracker)
self._plan_step(sun, now, clamp)
self.would = (self.amps_out(clamp), self.n_calc)
self.reinit = True
return
self.out = False
self.would = None
fault = ("error" if (r.error or r.state in ("E", "F")) else
"stuck" if tracker is not None and tracker.stuck(now)
else None)
if fault is not None:
# 0 A once, then no write until it clears; then the start rule.
self.seq = None
if self.fault != fault:
self.fault, self.fault_done = fault, False
if fault == "error" and not self.warned:
self.warned = True
_LOG.warning("The charger reports an error, so the add-on "
"sets the car to 0 A: CHARGER_ERROR.")
if not self.fault_done:
self.fault_done = True
await self._zero_once(drv, cur, now, tracker,
force=fault == "stuck")
self.plan.reset(self.plan.n, why=fault)
self.reinit = True
return
if self.fault is not None:
self.fault, self.fault_done = None, False
self.warned = False
if r.state == "A" or status == CH.NONE_:
# No car: the standing current is 0 A, written once.
self.seq = None
if not self.stand:
self.stand = True
await self._zero_once(drv, cur, now, tracker)
self.plan.reset(self.plan.n, why="none")
self.reinit = False
return
self.stand = False
if self.reinit:
self.reinit = False
self.seq = None
self.mismatch_since = None
self.sent_a = None
n = r.phases_allowed if r.phases_allowed in (1, 3) else self.plan.n
self.plan.reset(n)
if status == CH.FULL: # the car is full: nothing written
self.plan.why = "full"
return
if self.seq is None:
self._watch(cur, now)
if self.hold:
return
self._plan_step(sun, now, clamp)
if self.seq is not None:
q = self.seq
if self.plan.a < CH.MIN_A:
self.seq = None # paused or cut: it stays at 0 A
return
pf = self.phase_fails
await self._advance(drv, r, cur, now, tracker, self.amps_out(clamp)
or CH.MIN_A, clamp, None)
if self.phase_fails > pf and q.get("from") in (1, 3):
self.plan.n = q["from"] # the select was not taken
if self.seq is None:
self.sent_a = self.last_a
return
want = self.amps_out(clamp)
if want >= CH.MIN_A and not self.single and not self.phases_gave_up \
and r.phases_allowed in (1, 3) \
and r.phases_allowed != self.plan.n:
if self.last_switch is not None \
and now - self.last_switch < PHASE_GAP_S:
self.blocked = True
return
self.blocked = False
self.zero_at, self.sent_a = now, 0.0
await self._begin(drv, r, cur, self.plan.n, now, tracker)
if self.seq is not None:
self.seq["from"] = r.phases_allowed
return
if self.sent_a is not None and abs(self.sent_a - want) <= TOL_A \
and self.fail_at is None:
return # nothing new: a read-back that differs is `_watch`'s
if cur is not None and abs(cur - want) <= TOL_A:
self.sent_a = want
self.fails, self.fail_at = 0, None
if self.last_a is None or abs(self.last_a - cur) > TOL_A:
self.last_a = cur
return
if self.gave_up or (self.fail_at is not None
and now - self.fail_at < RETRY_S):
return
if want <= 0.0:
self.zero_at = now
self.sent_a = want
if await self._write(drv, want, cur, now, tracker):
self.fails, self.fail_at = 0, None
else:
self._failed(now)
async def release(self, drv, r, now, tracker) -> None:
"""The add-on stops in Solar: 0 A, once, before the inverters go to
0 W. A phase change in the middle is not undone to the old current."""
self.seq = None
if r is not None and r.available:
cur = r.allowed_a if r.allowed_a is not None else r.setpoint_a
else:
cur = None
if self.last_done is not None and tracker is not None \
and tracker.obs_at is not None \
and tracker.obs_at <= self.last_done:
cur = self.last_a # the reading predates our own write
self._clock = self._clock or (lambda: now)
await self._zero_once(drv, cur, now, tracker)
self.out = True
+25 -5
View File
@@ -5,8 +5,8 @@ actuator per site, a census key, a read, a clamped write that says whether the
charger took it, and a hand-back. A charger is a modulated actuator with a fail
state, not one of DEV-01's on/off loads.
EV-04 IS THE FIRST CARD THAT WRITES TO THE CHARGER, and only in Manual
(`app/carmode.py` is the one caller). `write_current` is clamped to
EV-04 IS THE FIRST CARD THAT WRITES TO THE CHARGER, in Manual and (EV-05) in
Solar (`app/carmode.py` is the one caller). `write_current` is clamped to
`min(ev_max_a, the station limit the charger reports, the entity's own range)`
and a value above that is NEVER SENT: it is a software fault, logged in the
OUTPUT_CLAMP shape. It says True only when the charger's read-back followed
@@ -42,7 +42,13 @@ PHASES_CHOICES = ("1", "3", "auto")
# config.yaml's shipped defaults, mirrored (test_defaults_pin.py checks it).
EV_OPTION_DEFAULTS = {"ev_charger": "off", "ev_current_entity": "",
"ev_max_a": 16, "ev_phases": "auto",
"ev_batt_cover": True, "ev_mode_start": "keep"}
"ev_batt_cover": True, "ev_mode_start": "keep",
# EV-05, Solar: the sun kept back, and the two dwells
"ev_margin_w": 100, "ev_pause_min": 5,
"ev_start_min": 2}
#: EV-05: the ranges config.yaml's schema and the validator both hold.
SOLAR_RANGES = {"ev_margin_w": (0, 1000), "ev_pause_min": (1, 30),
"ev_start_min": (1, 30)}
def max_a(opts: dict):
@@ -553,7 +559,9 @@ class AlfenHaDriver(ChargerDriver):
async def release(self, mode: str) -> bool:
"""The mode's fail state. Manual and Off keep the current (the charger
is a stand-alone device and the current is the user's setting)."""
is a stand-alone device and the current is the user's setting). Solar's
0 A goes through `carmode` (`SolarWriter.release`), the one write
site, so nothing is written here."""
return True
@@ -800,8 +808,20 @@ class CarTracker:
EV-03 rules), not stuck after a write, corroborated by the energy meter
(`corroborated`), and never above what the read-back allows the car to
draw: an old or frozen figure must not hide a house overload."""
return self._capped_w(now, True)
def car_w_paused(self, now: float):
"""EV-15: the same figure as `car_w_trusted` without the energy-meter
corroboration, which a car held at 0 A by the add-on's own phase change
cannot give (the meter's window restarts when it stops charging). Fresh,
not stuck, and capped by the read-back. Only for grading the alarm
during that sequence (`ctl_car._car_own_pause`)."""
return self._capped_w(now, False)
def _capped_w(self, now: float, corroborate: bool):
w = self.car_w(now)
if w is None or self.stuck(now) or not self.corroborated(now):
if w is None or self.stuck(now) \
or (corroborate and not self.corroborated(now)):
return None
r = self.reading
a = r.allowed_a if r.allowed_a is not None else r.setpoint_a
+317 -29
View File
@@ -1,17 +1,21 @@
"""EV-04: the Controller's side of the car's Manual mode.
"""EV-04 and EV-05: the Controller's side of the car's Manual and Solar modes.
The writes themselves are `carmode.ManualWriter`'s; this mixin owns the state
(mode, current, phases: runtime state in the store, like OPT-11's modes), the
actions, the background step that never holds up a control cycle, and what the
car means for the peak guard's ALARM PATH. DECISIONS/EV-04-manual-mode.md.
EV-05 (DECISIONS/EV-05-solar-mode.md): Solar's inputs (`car_sun_inputs`), the
peak guard's excess taken off the car first (`car_cycle`), the 0 A at shutdown
before the inverters, and the solar kWh of today.
"""
import asyncio
import dataclasses
import logging
import math
from datetime import timezone
from . import carmode, chargers, messages, peakguard
from . import carmode, chargers, messages, packmode, packshare, peakguard
from .tariff import QUARTER_S
_LOG = logging.getLogger("goodwe")
@@ -24,6 +28,17 @@ OVER_HOLD_S = peakguard.ALARM_HOLD_S
# the cause: longer than the gaps seen on the rig (150 to 250 s at 50 s
# sampling) and shorter than a quarter, or until the session really ends.
OVER_OFF_HOLD_S = 180.0
# EV-15: the longest our own phase change can take (0 A wait, settle, three
# tries of a write at 5 s apart and up to 10 s each, the select's own wait);
# the grace for the alarm never outlasts it, and after the current is set
# again it lasts at most one corroboration window.
OWN_PAUSE_MAX_S = (carmode.ZERO_WAIT_S + carmode.SETTLE_S
+ carmode.MAX_TRIES * 15.0 + 10.0)
OWN_PAUSE_TAIL_S = chargers.CORR_WINDOW_S
CAR_SUN_KEY = "car_sun" # EV-05: {day, kwh} charged from the sun today
# EV-05: at shutdown the charger's 0 A waits at most this long, then the
# inverters are released whatever the charger did.
RELEASE_WAIT_S = 15.0
class CarMixin:
@@ -45,6 +60,25 @@ class CarMixin:
self.car_n = n if n in ok else ok[0]
self.car_rev = 0
self.car_writer = carmode.ManualWriter()
self.car_solar = carmode.SolarWriter() # EV-05
first = data.get(carmode.KEY_FIRST)
self.car_first = first if first in carmode.FIRSTS \
else carmode.DEFAULT_FIRST
self.car_cut_w = 0.0
self._car_key = None
self._car_late_s = None
self._car_sun_last = None
self._car_error_notified = False
sun = data.get(CAR_SUN_KEY)
self.car_sun = {"day": None, "kwh": 0.0}
if isinstance(sun, dict):
try:
self.car_sun = {"day": sun.get("day"),
"kwh": max(0.0, float(sun.get("kwh") or 0.0))}
except (TypeError, ValueError):
pass
self._car_sun_mono = None
self._car_sun_saved = round(self.car_sun["kwh"], 2)
self._car_task = None
self._car_step_failed = False
self.car_explains = False # the car alone explains the excess
@@ -57,7 +91,7 @@ class CarMixin:
self._car_over_notified = None # the session a notice was raised for
self._car_session = 0
self._car_prev_state = None
self._carq = {"key": None, "ws": 0.0, "mono": None}
self._carq = {"key": None, "ws": 0.0, "ws_p": 0.0, "mono": None}
self._peak_proj_real = None
saved = data.get(CAR_PEAK_KEY)
self.car_peak_q = dict(saved) if isinstance(saved, dict) else {}
@@ -74,6 +108,12 @@ class CarMixin:
return (self.charger.configured()
and self.car_mode == carmode.MANUAL)
def car_solar_mode(self) -> bool:
"""EV-05: a charger is set up and the mode is Solar."""
ch = getattr(self, "charger", None)
return bool(ch is not None and ch.configured()
and getattr(self, "car_mode", None) == carmode.SOLAR)
def car_clamp(self):
return carmode.clamp_for(self.o, self.car.reading)
@@ -97,6 +137,17 @@ class CarMixin:
return {"error": messages.car_refused("value")}
self.car_mode = value
self.store.set(carmode.KEY_MODE, value)
elif what == "car_sun_first":
# EV-05: arithmetic only, from the next cycle; not a user change of
# the writers (the 30 s rule and the other-writer hold stand).
if value not in carmode.FIRSTS:
return {"error": messages.car_refused("value")}
self.car_first = value
self.store.set(carmode.KEY_FIRST, value)
self.log_event(f"car sun first set to {value} by operator",
hint=messages.hint("car_sun_first"))
return {"mode": self.car_mode, "current": self.car_a,
"phases": self.car_n, "sun_first": self.car_first}
elif what == "car_current":
clamp = self.car_clamp()
if isinstance(value, bool):
@@ -119,6 +170,7 @@ class CarMixin:
self.store.set(carmode.KEY_PHASES, value)
self.car_rev += 1
self.car_writer.user_changed()
self.car_solar.user_changed()
self.log_event(f"car {what[4:]} set to {value} by operator",
hint=messages.hint(what))
return {"mode": self.car_mode, "current": self.car_a,
@@ -128,7 +180,8 @@ class CarMixin:
"""The MQTT state of the three car entities."""
return {"car_mode": carmode.MODE_LABELS[self.car_mode],
"car_current": round(self.car_a),
"car_phases": str(self.car_n)}
"car_phases": str(self.car_n),
"car_sun_first": carmode.FIRST_LABELS[self.car_first]}
# ------------------------------------------------------------- the writer
def car_kick(self) -> None:
@@ -142,6 +195,15 @@ class CarMixin:
return
self._car_task = asyncio.ensure_future(self._car_run())
def _car_hold_kick(self) -> None:
"""EV-05: a cycle that holds for a missing or late reading returns
before `car_kick()`. Solar still steps (it holds, counts its dwell from
the first missing reading, and an exit still writes its 0 A); Manual is
left exactly as it was."""
if self.car_solar_engaged():
self.car_cut_w = 0.0
self.car_kick()
async def car_settle(self) -> None:
"""Wait for the writer step in flight (the checks use it)."""
t = self._car_task
@@ -164,14 +226,30 @@ class CarMixin:
else:
self._car_step_failed = False
def car_solar_engaged(self) -> bool:
"""EV-05: Solar is the mode, or its 0 A on the way out is still due."""
w = getattr(self, "car_solar", None)
return bool(self.charger.configured() and w is not None
and (self.car_mode == carmode.SOLAR or w.engaged))
async def car_shutdown(self) -> None:
"""The add-on stops: no new write, and a phase change in the middle is
undone by giving the car its current back. The current stands
otherwise (Manual's fail state)."""
"""The add-on stops: no new write. Manual: a phase change in the middle
is undone by giving the car its current back, the current stands
otherwise. Solar (EV-05): 0 A, once, waited for at most
`RELEASE_WAIT_S` (`Controller.shutdown` calls this first in Solar)."""
t, self._car_task = getattr(self, "_car_task", None), None
if t is not None and not t.done():
t.cancel()
await asyncio.gather(t, return_exceptions=True)
if self.car_solar_engaged():
try:
await asyncio.wait_for(self.car_solar.release(
self.charger, self.car.reading, self.car_now(), self.car),
RELEASE_WAIT_S)
except Exception: # noqa: BLE001
_LOG.warning("The car charger could not be set to 0 A before "
"the add-on stopped: CHARGER_RELEASE.")
return
if not self.charger.configured() \
or getattr(self, "car_writer", None) is None \
or self.car_writer.seq is None:
@@ -190,33 +268,214 @@ class CarMixin:
if not self.charger.configured():
return
now = self.car_now()
await self.car_writer.step(
self.charger, self.car.reading, mode=self.car_mode,
want_a=self.car_a, want_phases=self.car_n, rev=self.car_rev,
clamp=self.car_clamp(), now=now, tracker=self.car,
writing=self.car_writing(), shadow=bool(self.shadow),
status=self.car.status(now, True), clock=self.car_now)
if self.car_mode != carmode.SOLAR:
await self.car_writer.step(
self.charger, self.car.reading, mode=self.car_mode,
want_a=self.car_a, want_phases=self.car_n, rev=self.car_rev,
clamp=self.car_clamp(), now=now, tracker=self.car,
writing=self.car_writing(), shadow=bool(self.shadow),
status=self.car.status(now, True), clock=self.car_now)
w = self.car_solar
if self.car_mode == carmode.SOLAR or w.engaged:
await w.step(
self.charger, self.car.reading, mode=self.car_mode,
sun=(self.car_sun_inputs(now)
if self.car_mode == carmode.SOLAR else None),
clamp=self.car_clamp(), now=now, tracker=self.car,
writing=self.car_writing(), status=self.car.status(now, True),
clock=self.car_now)
# ------------------------------------------------------- EV-05: Solar
def car_may_charge(self, inv) -> bool:
"""May this battery take the sun? On (battery modes), not refusing a
charge, its level read and under full."""
if self.modes_on and not self.pack_mode(inv).use:
return False
if (inv.refused or 0) < 0 or inv.sign_wd.tripped:
return False
if len(self.inverters) == 1 and (self.batt_refused or 0) < 0:
return False
return inv.soc is not None and float(inv.soc) < packshare.FULL_PCT
def car_room_w(self) -> float:
"""Batteries first: the RATINGS of the batteries that may charge."""
return float(sum(inv.rating_w() for inv in self.inverters
if self.car_may_charge(inv)))
def car_spare_w(self, mono):
"""The signed spare sun now, or None when it cannot be measured: a
missing meter or battery figure, readings late past the stale bound,
or a charging car whose figure is stale, stuck or not corroborated. A
paused or idle car with a fresh reading counts as 0 W."""
if not self.inputs_ok:
return None
stale = float(self.o.get("stale_input_s", 15))
late = self._car_late_s
if late is not None and late >= stale:
return None
if self.p1_enabled:
# The meter's own bound (`meter_max_age_s`) may be longer than
# `stale_input_s`; a car write never comes from an older reading.
age = self.p1.age_s()
if age is None or age > stale:
return None
r = self.car.reading
if r is None or not r.available or not self.car.fresh(mono):
return None
if r.charging is True:
car = self.car.car_w_trusted(mono)
else:
car = 0.0
return carmode.spare_w(car, self.site_batt_w, self.grid)
def car_sun_inputs(self, mono) -> "carmode.SunInputs":
o = self.o
spare = self.car_spare_w(mono)
late = self._car_late_s
hold = late is not None and late < float(o.get("stale_input_s", 15))
room = self.car_room_w()
margin = carmode.solar_option(o, "ev_margin_w")
ph = str(o.get("ev_phases", chargers.EV_OPTION_DEFAULTS["ev_phases"]))
self._car_sun_last = carmode.SunInputs(
target_w=carmode.car_target_w(spare, room, margin,
self.car_first),
hold=hold, cut_w=self.car_cut_w,
car_w=self.car.car_w(mono), key=self._car_key,
auto=ph not in ("1", "3"), fixed_n=3 if ph == "3" else 1,
start_s=60.0 * carmode.solar_option(o, "ev_start_min"),
pause_s=60.0 * carmode.solar_option(o, "ev_pause_min"),
spare_w=spare, room_w=room, margin_w=margin,
first=self.car_first)
return self._car_sun_last
def _car_sun_tick(self, mono) -> None:
"""Solar kWh: per cycle, in Solar only, the car's power up to the sun
it may take (`spare - room` Batteries first, `spare` Car first). The
hold's battery or grid share and Manual do not count."""
if not self.car_solar_mode():
self._car_sun_mono = None
return
day = self.car.day
if day is not None and self.car_sun.get("day") != day:
self.car_sun = {"day": day, "kwh": 0.0}
self.store.set(CAR_SUN_KEY, dict(self.car_sun))
self._car_sun_saved = 0.0
last, self._car_sun_mono = self._car_sun_mono, mono
if last is None:
return
dt = min(max(mono - last, 0.0), 5.0)
p = self.car.car_w(mono)
spare = self.car_spare_w(mono)
if p is None or spare is None or dt <= 0.0:
return
sun = spare - (self.car_room_w() if self.car_first == carmode.FIRST_BATT
else 0.0)
share = min(float(p), max(0.0, sun))
if share <= 0.0:
return
self.car_sun["kwh"] += share * dt / 3.6e6
if round(self.car_sun["kwh"], 2) != self._car_sun_saved:
self._car_sun_saved = round(self.car_sun["kwh"], 2)
self.store.set(CAR_SUN_KEY, {"day": self.car_sun["day"],
"kwh": round(self.car_sun["kwh"], 4)})
def car_sun_kwh(self):
"""Today's kWh from the sun, never above today's kWh; None without a
reading of today."""
if self.car.today_kwh is None or self.car_sun.get("day") != self.car.day:
return None if self.car.today_kwh is None else 0.0
return max(0.0, min(float(self.car_sun["kwh"]),
float(self.car.today_kwh)))
async def check_car_error(self) -> None:
"""EV-05: in Solar a charger error sets the car to 0 A and raises one
warning notification; it is taken down when the error clears."""
bad = self.car_solar_mode() and self.car_solar.fault == "error"
if bad and not self._car_error_notified:
self._car_error_notified = True
await self.hass.call("persistent_notification", "create",
messages.charger_error().data())
elif not bad and self._car_error_notified:
self._car_error_notified = False
await self.hass.call("persistent_notification", "dismiss",
messages.charger_error_gone().data())
# ------------------------------------------- the car and the peak guard
def car_alarm_w(self):
"""The car's power for the guard's alarm path: Manual only, fresh, not
stuck (`CarTracker.car_w_trusted`), and never above what the read-back
allows. None otherwise, and then the normal alarms stand."""
if not self.car_manual():
"""The car's power for the guard's alarm path: Manual and Solar, fresh,
not stuck (`CarTracker.car_w_trusted`), and never above what the
read-back allows. None otherwise, and then the normal alarms stand."""
if not (self.car_manual() or self.car_solar_mode()):
return None
return self.car.car_w_trusted(self.car_now())
def _car_quarter(self, proj, w, mono) -> None:
def _car_own_pause(self, mono) -> bool:
"""EV-15: is the car held at 0 A by the add-on's OWN phase change? From
the moment its 0 A write is SENT (the cycle runs beside the write)
until the current is set again, then at most one corroboration window.
No when it was aborted (Off, Stop, shadow, unplug, another writer), a
write was refused, or it ran past its own maximum."""
if self.car_solar_mode():
return self._car_solar_pause(mono)
wr = getattr(self, "car_writer", None)
if wr is None or (wr.seq is None and wr.phase_done_at is None
and wr.zero_sent_at is None) or wr.hold:
return False
r = self.car.reading
if not (self.car_manual() and self.car_writing()
and r is not None and r.available and r.state != "A"):
return False
q = wr.seq
if q is None and wr.zero_sent_at is not None: # sent, not yet back
return 0.0 <= mono - wr.zero_sent_at <= OWN_PAUSE_MAX_S
if q is not None:
return not q.get("failed") and 0.0 <= mono - q["t0"] \
<= OWN_PAUSE_MAX_S
return 0.0 <= mono - wr.phase_done_at <= OWN_PAUSE_TAIL_S
def _car_solar_pause(self, mono) -> bool:
"""EV-05: Solar's own 0 A (a pause, the peak cut, the phase change)
gets EV-15's grace, bounded the same way: from the moment it is sent,
at most `OWN_PAUSE_MAX_S`; a phase change as in Manual. None for Stop,
shadow, an unplugged car or another writer."""
wr = getattr(self, "car_solar", None)
r = self.car.reading
if wr is None or wr.hold or not self.car_writing() or r is None \
or not r.available or r.state == "A":
return False
q = wr.seq
if q is not None:
return not q.get("failed") and 0.0 <= mono - q["t0"] \
<= OWN_PAUSE_MAX_S
if wr.zero_sent_at is not None:
return 0.0 <= mono - wr.zero_sent_at <= OWN_PAUSE_MAX_S
if wr.zero_at is not None and 0.0 <= mono - wr.zero_at \
<= OWN_PAUSE_MAX_S:
return True
return wr.phase_done_at is not None \
and 0.0 <= mono - wr.phase_done_at <= OWN_PAUSE_TAIL_S
def _car_quarter(self, proj, w, mono, wg=None) -> None:
"""The car's energy in the open quarter, for the average the guard's
house leaves out and for the peak line."""
house leaves out and for the peak line. `wg` (EV-15) is the figure for
grading during our own pause; its energy is kept apart (`ws_p`) so the
guard's input is unchanged."""
q = self._carq
key = None if proj is None else proj.block_start
last = q["mono"]
if key != q["key"]:
self._car_bank(q)
q["key"], q["ws"] = key, 0.0
if key is not None and w is not None and last is not None:
q["ws"] += float(w) * min(max(mono - last, 0.0), 5.0)
q["key"], q["ws"], q["ws_p"], q["ws_b"] = key, 0.0, 0.0, 0.0
if key is not None and last is not None:
dt = min(max(mono - last, 0.0), 5.0)
if w is not None:
q["ws"] += float(w) * dt
if not self.car_solar_mode():
# EV-05: only a charge you set can be "set by the car";
# a Solar charge runs on spare sun and is cut first.
q["ws_b"] = q.get("ws_b", 0.0) + float(w) * dt
elif wg is not None:
q["ws_p"] = q.get("ws_p", 0.0) + float(wg) * dt
q["mono"] = mono
def _car_bank(self, q) -> None:
@@ -224,7 +483,7 @@ class CarMixin:
key = q["key"]
if key is None:
return
avg = q["ws"] / QUARTER_S
avg = q.get("ws_b", q["ws"]) / QUARTER_S
if avg < CAR_PEAK_MIN_W:
return
self.car_peak_q[key.astimezone(timezone.utc).isoformat()] = round(avg)
@@ -233,14 +492,17 @@ class CarMixin:
del self.car_peak_q[k]
self.store.set(CAR_PEAK_KEY, dict(self.car_peak_q))
def car_avg_w(self, proj, w) -> float:
def car_avg_w(self, proj, w, graded=False) -> float:
"""The car's average over the whole open quarter: what it drew so far
and `w` for the rest."""
and `w` for the rest. `graded` (EV-15) adds what it drew during our
own pause."""
if proj is None or w is None:
return 0.0
left = max(0.0, QUARTER_S - float(proj.elapsed_s))
so_far = self._carq["ws"] if self._carq["key"] == proj.block_start \
else 0.0
if graded and self._carq["key"] == proj.block_start:
so_far += self._carq.get("ws_p", 0.0)
return (so_far + float(w) * left) / QUARTER_S
def car_exclude(self, proj, w):
@@ -264,7 +526,7 @@ class CarMixin:
the car asked for. Unchanged without a fresh car reading."""
if proj is None or w is None or proj.block_start is None:
return proj
avg = self.car_avg_w(proj, w)
avg = self.car_avg_w(proj, w, graded=True)
left = max(0.0, QUARTER_S - float(proj.elapsed_s))
held = float(proj.held_w)
done_ws = QUARTER_S * float(proj.projected_w) - max(held, 0.0) * left
@@ -279,15 +541,41 @@ class CarMixin:
"""After the guard has decided: does the car alone explain the excess?
`real_proj` is the projection WITH the car, whatever the guard saw."""
mono = self.car_now()
# EV-05: the period's own key, and the excess Solar takes off the car
# first (the writer step that follows this cycle acts on it at once).
self._car_key = None if real_proj is None else real_proj.block_start
self.car_cut_w = 0.0
# What the guard would ASK the batteries to give (`wanted_w`, its floor
# before the rating) is taken off the car instead, up to the excess:
# batteries that only stop charging are not asked for anything.
if self.car_solar_mode() and real_proj is not None \
and target_w is not None and real_proj.block_start is not None \
and guard is not None and guard.engaged and guard.blind is None:
ex = peakguard.excess_w(real_proj, target_w)
want = guard.wanted_w
if ex is not None and want is not None and math.isfinite(ex) \
and math.isfinite(want) and ex > 0.0 and want > 0.0:
self.car_cut_w = float(min(ex, want))
self._car_sun_tick(mono)
w = self.car_alarm_w()
self._car_quarter(real_proj, w, mono)
# EV-15: the figure for grading only. Our own phase change holds the
# car at 0 A and the energy meter cannot corroborate it then, so for
# that bounded time its fresh, not stuck figure stands in.
wg = w
if w is None and self._car_own_pause(mono):
wg = self.car.car_w_paused(mono)
self._car_quarter(real_proj, w, mono, wg)
self._car_session_tick(mono)
explains = over = False
if real_proj is not None and target_w is not None \
and real_proj.block_start is not None:
# EV-10: every cycle, so the latches do not depend on the option.
graded = self._car_explains_alarm(real_proj, guard, target_w, w)
if self.car_cover:
graded = self._car_explains_alarm(real_proj, guard, target_w, wg)
if self.car_solar_mode():
# EV-05: Solar is cut first, so it is never "over"; its own
# 0 A must not leave the house's alarm graded with the car.
explains = graded
elif self.car_cover:
explains = over = graded
elif w is not None:
ex = float(real_proj.projected_w) - float(target_w)
+5 -1
View File
@@ -253,6 +253,7 @@ class CycleMixin:
stale_after = float(self.o.get("stale_input_s", 15))
late_s = self._readings_late(site_standing) # SAFETY-128
self._car_late_s = late_s # EV-05: Solar holds, then the stale rule
self._late_zero = late_s is not None and late_s >= stale_after
# ⚠️ `any`, NOT the sole unit's. The hold exists so a single missed
# poll does not become a fault; a LATCHED inverter must still reach the
@@ -272,6 +273,7 @@ class CycleMixin:
# this cycle's. (DECISIONS/MAIN-orchestration-archive.md)
self.why_words = messages.why_waiting(bad_for)
self._why_waiting_since = now - timedelta(seconds=bad_for)
self._car_hold_kick() # EV-05: Solar counts from now
return
if late_s is not None and late_s < stale_after and self.inputs_ok \
and (self.auto or self.shadow) \
@@ -279,6 +281,7 @@ class CycleMixin:
and not (n_units > 1 and self.site_sign_wd.tripped):
self.reason = f"readings late {late_s:.0f}s" # SAFETY-128: hold
self.why_words = messages.why_late()
self._car_hold_kick() # EV-05: Solar holds its current
return
claims = []
@@ -1065,7 +1068,8 @@ class CycleMixin:
await self.check_price_gap()
await self.check_charger()
await self.check_car_over()
self.car_kick() # EV-04: Manual, in the background
await self.check_car_error() # EV-05: Solar's charger error
self.car_kick() # EV-04/05: in the background
await self.check_fixed_note()
# SAFETY-31's alarm, and its boundary is the LATCH, not a number: it
+17 -2
View File
@@ -205,7 +205,20 @@ class StatusMixin:
"text": messages.row_charger_unreach(
f"{brussels(self.car.bad_since_utc):%H:%M}")})
w = self.car_writer
if self.car_mode == "manual":
sw = self.car_solar
if self.car_mode == "solar":
# EV-05: in Solar another writer stops the add-on's writes: amber,
# the same words as in Manual.
if sw.other:
out.append({"ok": False, "warn": True, "id": "charger_other",
"text": messages.row_charger_other()})
if sw.gave_up:
out.append({"ok": False, "warn": True, "id": "charger_refused",
"text": messages.row_charger_refused()})
if sw.phases_gave_up:
out.append({"ok": False, "warn": True, "id": "charger_phases",
"text": messages.row_charger_phases()})
elif self.car_mode == "manual":
# EV-04: in Manual the add-on's own writes are not "another
# writer"; its own detector (a read-back that differs from the
# last write for 30 s) says so, in grey.
@@ -250,6 +263,8 @@ class StatusMixin:
or r.power_w is None else round(r.power_w, 1)),
"car_today_kwh": (PAYLOAD_NONE if self.car.today_kwh is None
else round(self.car.today_kwh, 3)),
"car_today_solar_kwh": (PAYLOAD_NONE if self.car_sun_kwh() is None
else round(self.car_sun_kwh(), 3)),
}
# -- UI ------------------------------------------------------------------
@@ -922,7 +937,7 @@ class StatusMixin:
now = datetime.now(timezone.utc)
if what in ("pack_use", "pack_mode", "pack_sell"):
return self._pack_action(what, unit, value, now)
if what in ("car_mode", "car_current", "car_phases"):
if what in ("car_mode", "car_current", "car_phases", "car_sun_first"):
return self._car_action(what, value, now)
if what == "auto_toggle":
self.auto = not self.auto
+82 -7
View File
@@ -1147,7 +1147,8 @@ def month_peak(c, now):
# set the month's peak. Both empty without a charger in Manual.
out["car_line"] = out["set_by"] = ""
if getattr(c, "car_enabled", False) and c.charger.configured():
w = c.car_alarm_w()
# EV-05: Manual only. A Solar charge is cut first for the peak.
w = c.car_alarm_w() if c.car_manual() else None
if pg is not None and w is not None and w >= 500.0 \
and out["period_w"] is not None and (pg.engaged or c.car_over):
out["car_line"] = _t("peak.car", kw=_kw(out["period_w"]),
@@ -1330,6 +1331,64 @@ def _car_manual_why(c, key):
return _t("car.why.manual_set", a=a, phases=car_phases_word(c.car_n))
def _names(invs) -> str:
names = [str(i.name) for i in invs]
return " " .join(names[:1]) if len(names) == 1 else \
", ".join(names[:-1]) + " " + _t("car.and") + " " + names[-1]
def _car_solar_why(c, key):
"""EV-05: the Why of Solar, from what the plan did this cycle. Plan
lines: two sentences of at most 12 words."""
w = c.car_solar
p = w.plan
o = getattr(c, "o", {}) or {}
if w.other:
return _t("car.why.solar_other")
if c.shadow:
a, n = w.would if w.would is not None else (0.0, p.n)
if a and a >= 6:
return _t("car.why.manual_would", a=f"{float(a):.0f}",
phases=car_phases_word(n))
return _t("car.why.solar_would")
if not c.auto or not c.car_writing():
return _t("car.why.solar_stopped")
if w.fault in ("error", "stuck"):
return _t("car.why.solar_" + w.fault)
if key in ("none", "full"):
return _t("car.why." + key)
why = p.why
if why == "running":
sun = getattr(c, "_car_sun_last", None)
if sun is None or sun.spare_w is None:
return _t("car.why.solar_unknown")
if sun.first == carmode.FIRST_CAR:
return _t("car.why.solar_car",
kw=_kw(max(0.0, sun.spare_w - sun.margin_w)),
phases=car_phases_word(w.n_calc))
room = [i for i in c.inverters if c.car_may_charge(i)]
full = [i for i in c.inverters if not c.car_may_charge(i)
and i.soc is not None and float(i.soc) >= 100.0]
left = _kw(max(0.0, sun.spare_w - sun.room_w))
m = watts_text(sun.margin_w)
if room and full:
return _t("car.why.solar_batt", a=_names(room), b=_names(full),
kw=left, m=m)
if room:
return _t("car.why.solar_batt_room", a=_names(room), kw=left,
m=m)
return _t("car.why.solar_batt_full", kw=left, m=m)
mins = {"hold": "ev_pause_min"}.get(why, "ev_start_min")
s = f"{carmode.solar_option(o, mins):.0f}"
if why in ("hold", "start", "cut", "unknown"):
return _t("car.why.solar_" + why, s=s)
return _t("car.why.solar_paused", s=s)
def watts_text(w) -> str:
return f"{float(w):.0f} W"
def car_block(c, now):
"""The Car card for `/status`, or None when no charger is switched on (the
page then draws nothing, as before)."""
@@ -1342,12 +1401,22 @@ def car_block(c, now):
good = c.car.last_good
fresh = configured and c.car.fresh(mono)
today = None
if configured and c.car.today_kwh is not None:
today = _t("car.today", kwh=_kwh(c.car.today_kwh))
mode = getattr(c, "car_mode", "off") if configured else "off"
if configured and c.car.today_kwh is not None:
sun = c.car_sun_kwh() if hasattr(c, "car_sun_kwh") else None
today = (_t("car.today_sun", kwh=_kwh(c.car.today_kwh),
sun=_kwh(sun))
if mode == "solar" and sun is not None
else _t("car.today", kwh=_kwh(c.car.today_kwh)))
why = _car_why(key, c, good)
if mode == "manual" and key in ("charging", "waiting", "none", "full"):
why = _car_manual_why(c, key)
if mode == "solar" and key in ("charging", "waiting", "none", "full",
"fault"):
why = _car_solar_why(c, key)
# EV-05: a car Solar holds at 0 A is waiting for the sun.
if key == "waiting" and c.car_solar.plan.a <= 0.0:
key = "paused"
out = {
"state": key or "wait",
"chip": car_state_word(key),
@@ -1360,11 +1429,13 @@ def car_block(c, now):
else round(float(r.power_w), 1)),
}
if configured:
# EV-04: what the page can set. Off and Manual only (Solar and Night
# are later cards, so they are not offered).
# EV-04: what the page can set. EV-05 adds Solar and where its spare
# sun goes first (Night is a later card, so it is not offered).
clamp = c.car_clamp()
hi = int(clamp) if clamp is not None and clamp >= 6 else 6
out["modes"] = ["off", "manual"]
out["modes"] = list(carmode.MODES)
out["first"] = {"value": getattr(c, "car_first", carmode.DEFAULT_FIRST),
"choices": list(carmode.FIRSTS)}
out["current"] = {"value": round(float(c.car_a)), "min": 6,
"max": hi}
out["phases"] = {"value": c.car_n,
@@ -1883,8 +1954,12 @@ def _samples() -> list:
out += [("plan", _t("car.big." + k, t="09:12")) for k in
words["car"]["big"]]
out += [("plan", _t("car.why." + k, a="10", brand="Alfen", kw="8.6 kW",
pct="20 %", phases=car_phases_word(3)))
pct="20 %", phases=car_phases_word(3),
b="inverter-b", m="100 W", s="5"))
for k in words["car"]["why"]]
out += [("plan", _t("car.why.solar_batt", a="inverter-a",
b="inverter-b", kw="2.0 kW", m="100 W")),
("plan", _t("car.today_sun", kwh="14.2 kWh", sun="3.1 kWh"))]
out += [("plan", _t("peak.car", kw="12.1 kW", car="11.0 kW",
cov="8.6 kW")),
("plan", _t("peak.set_by_car", t="19:45"))]
+8 -2
View File
@@ -1040,8 +1040,14 @@ class Controller(InputsMixin, WritesMixin, TradeMixin, CycleMixin, AlarmsMixin,
self.stopping = True
_LOG.info(handback.log_shutdown(handback.current())
or "shutting down - commanding 0 W on every inverter")
await self.command_site_release()
await self.car_shutdown() # EV-04: undo a phase change half way
if self.car_solar_engaged():
# EV-05: Solar's fail state is 0 A, and it goes out BEFORE the
# inverters go to 0 W (bounded by `ctl_car.RELEASE_WAIT_S`).
await self.car_shutdown()
await self.command_site_release()
else:
await self.command_site_release()
await self.car_shutdown() # EV-04: undo a phase change half way
self.mqtt.close()
+27
View File
@@ -190,6 +190,8 @@ T_CHARGER_UNREACH = "Charger not reachable"
T_CHARGER_UNREACH_NL = "Laadpaal onbereikbaar"
T_CAR_OVER = "Car over the peak limit"
T_CAR_OVER_NL = "Auto boven de piekgrens"
T_CHARGER_ERROR = "Charger error, car paused"
T_CHARGER_ERROR_NL = "Laadpaalfout, auto gepauzeerd"
T_NO_PRICES = "No prices"
T_NO_PRICES_NL = "Prijzen ontbreken"
@@ -204,6 +206,7 @@ ID_MAINT_FAILED = "goodwe_maint_failed_{slug}"
ID_NO_PRICES = "goodwe_no_prices"
ID_CHARGER_UNREACH = "goodwe_charger_unreachable"
ID_CAR_OVER = "goodwe_car_over"
ID_CHARGER_ERROR = "goodwe_charger_error"
# PRICE-01: an earlier build raised a card with this id. Nothing raises it now;
# the add-on only dismisses it at start.
OLD_FIXED_CARD_ID = "goodwe_fixed_tariff_unused"
@@ -510,6 +513,22 @@ def car_over(a_text) -> Notice:
body_nl=f"{T_CAR_OVER_NL}. {nl}")
def charger_error() -> Notice:
"""EV-05: in Solar the charger reports an error, so the add-on set the car
to 0 A. Said once per error, taken down when it clears."""
en = ("The charger reports an error, so the add-on paused the car until "
"it clears.")
nl = ("De laadpaal meldt een fout, dus de add-on pauzeert de auto tot die "
"verdwijnt.")
return Notice(ID_CHARGER_ERROR, WARNING, T_CHARGER_ERROR, en,
body_nl=f"{T_CHARGER_ERROR_NL}. {nl}")
def charger_error_gone() -> Dismiss:
"""EV-05: takes the 'Charger error, car paused' notification down."""
return Dismiss(ID_CHARGER_ERROR)
def row_car_over() -> str:
"""EV-04: the grey row while the car charge you set is over the peak limit."""
return Bi("The car charge you set takes this 15-minute period over the "
@@ -1484,6 +1503,7 @@ HINTS = {
"car_mode": "Car mode set",
"car_current": "Car current set",
"car_phases": "Car phases set",
"car_sun_first": "Where spare sun goes first set",
"settings_saved": "Settings saved, they apply after a restart",
"restart_requested": "Restart requested from the settings page",
"setup_only": "In setup, nothing is sent to any inverter",
@@ -1822,6 +1842,7 @@ def samples() -> list:
no_prices(),
charger_unreachable("09:12"),
car_over("16"),
charger_error(),
]
@@ -1891,6 +1912,9 @@ LABELS = {
"ev_batt_cover": "Batteries help with the peak",
"ev_mode_start": "Mode after a restart",
"ev_phases": "Phases",
"ev_margin_w": "Sun kept back",
"ev_pause_min": "Pause after",
"ev_start_min": "Start after",
}
@@ -1977,6 +2001,9 @@ LABELS_NL = {
"ev_batt_cover": "Batterijen helpen met de piek",
"ev_mode_start": "Modus na een herstart",
"ev_phases": "Fasen",
"ev_margin_w": "Zon achtergehouden",
"ev_pause_min": "Pauzeren na",
"ev_start_min": "Starten na",
}
# The inverter list shows two of them under a shorter name.
UNIT_LABELS_NL = {"setpoint_entity": "Setpoint-entiteit",
+18 -4
View File
@@ -144,6 +144,8 @@ OPTIONAL_SENSORS = [
("car_power", "goodwe_car_power", "Car power", "W", "power", "measurement", "mdi:car-electric"),
("car_state", "goodwe_car_state", "Car state", None, None, None, "mdi:ev-station"),
("car_today_kwh", "goodwe_car_today_kwh", "Car energy today", "kWh", "energy", "total_increasing", "mdi:ev-station"),
# EV-05: what of today's charge came from the sun (Solar mode only).
("car_today_solar_kwh", "goodwe_car_today_solar_kwh", "Car solar energy today", "kWh", "energy", "total_increasing", "mdi:solar-power"),
]
# ⚠️ HA's OWN "this sensor has no value" PAYLOAD, and the one place this add-on
@@ -200,7 +202,8 @@ def optional_keys(opts: dict) -> tuple:
from . import chargers as _ch # EV-03: same reason
out = ("pv",) if _pv.entities(opts) else ()
if _ch.census_entity(opts):
out += ("car_power", "car_state", "car_today_kwh")
out += ("car_power", "car_state", "car_today_kwh",
"car_today_solar_kwh")
return out
@@ -524,18 +527,24 @@ def mode_payloads(units, modes) -> list:
# --- EV-04: the car's mode, current and phases, as HA entities ----------------
# Announced only with a charger switched on, after every other row. A command
# goes through Controller.handle_action(); a retained one is dropped.
CAR_MODE_LABELS = {"off": "Off", "manual": "Manual"} # English, pinned
CAR_MODE_LABELS = {"off": "Off", "manual": "Manual", # English, pinned
"solar": "Solar"} # EV-05
# EV-05: where spare sun goes first; mirrors carmode.FIRST_LABELS (this module
# imports nothing from the package, test_ev05.py checks the two agree).
CAR_FIRST_LABELS = {"batteries": "Batteries", "car": "Car"}
CAR_MODES = tuple(CAR_MODE_LABELS)
CAR_CONFIGS_KEY = "mqtt_car_configs"
CAR_MIN_A = 6
_CAR_CMD_RE = re.compile(rf"{BASE}/car/(mode|current|phases)/set")
_CAR_CMD_RE = re.compile(rf"{BASE}/car/(mode|current|phases|sun_first)/set")
_CAR_CONFIG_RE = re.compile(
rf"homeassistant/(select|number)/{BASE}_car_(mode|current|phases)/config")
rf"homeassistant/(select|number)/{BASE}_car_(mode|current|phases|sun_first)"
rf"/config")
# (key, component, name, icon)
CAR_ENTITIES = [
("mode", "select", "Car mode", "mdi:car-electric"),
("current", "number", "Car current", "mdi:current-ac"),
("phases", "select", "Car phases", "mdi:sine-wave"),
("sun_first", "select", "Car spare sun first", "mdi:solar-power"), # EV-05
]
@@ -560,6 +569,8 @@ def car_payloads(car) -> list:
cfg["options"] = list(CAR_MODE_LABELS.values())
elif key == "phases":
cfg["options"] = [str(n) for n in phases]
elif key == "sun_first":
cfg["options"] = list(CAR_FIRST_LABELS.values())
else:
cfg.update({"min": CAR_MIN_A, "max": int(max_a), "step": 1,
"unit_of_measurement": "A", "device_class": "current",
@@ -607,6 +618,9 @@ def parse_car_command(topic, payload, retained):
None)
elif key == "phases":
value = {"1": 1, "3": 3}.get(text)
elif key == "sun_first":
value = next((k for k, v in CAR_FIRST_LABELS.items() if v == text),
None)
else:
try:
f = float(text)
+10 -2
View File
@@ -160,8 +160,9 @@
$("#car-why").textContent = c.why;
renderCarControls(c);
}
// EV-04: Off and Manual. The mode and the phases send at once; the current
// sends after two seconds of rest. A slider being dragged is left alone.
// EV-04: Off and Manual; EV-05: Solar and where its spare sun goes first.
// The mode, the phases and the choice send at once; the current sends after
// two seconds of rest. A slider being dragged is left alone.
let carTouch = 0, carTimer = null, carBusy = false;
async function carAct(what, value) {
if (carBusy) return;
@@ -182,6 +183,13 @@
type: "button", role: "radio", "aria-checked": String(c.mode === m),
onclick: () => carAct("car_mode", m) }, t("car.mode_" + m))));
$("#car-help").textContent = t("car.help_" + c.mode + ".description") || "";
const sol = c.mode === "solar" && !!c.first;
$("#car-solar").hidden = !sol;
if (sol) {
$("#car-first").replaceChildren(...c.first.choices.map((f) => h("button", {
type: "button", role: "radio", "aria-checked": String(c.first.value === f),
onclick: () => carAct("car_sun_first", f) }, t("car.first_" + f))));
}
const on = c.mode === "manual" && !!c.current;
$("#car-manual").hidden = !on;
if (!on) return;
+5
View File
@@ -52,6 +52,11 @@
<div class="small car-lab" data-t="car.phases"></div>
<div class="seg" role="radiogroup" id="car-phases" data-t-label="car.phases"></div>
</div>
<div id="car-solar" hidden>
<div class="small car-lab" data-t="car.first"></div>
<div class="seg" role="radiogroup" id="car-first" data-t-label="car.first"></div>
<p class="tiny muted" style="margin:6px 0 0" data-t="car.first_help.description"></p>
</div>
<div class="car-why small"><span class="muted" data-t="car.why"></span><span id="car-why"></span></div>
</div>
+19 -5
View File
@@ -91,7 +91,7 @@
"loading": "Loading the forecast."
},
"peak": {"name": "Peak limit", "this_month": "This month's peak", "limit": "Limit", "none": "None recorded yet", "unreadable": "Cannot be read now"},
"car": {"name": "Car", "mode": "Mode", "mode_off": "Off", "mode_manual": "Manual", "help_off": {"description": "The add-on leaves the charger alone."}, "help_manual": {"description": "Charges at the current you set, whatever the sun or the peak limit do."}, "current": "Current", "phases": "Phases", "phases_1": "1 phase", "phases_3": "3 phases", "why": "Why"},
"car": {"name": "Car", "mode": "Mode", "mode_off": "Off", "mode_manual": "Manual", "help_off": {"description": "The add-on leaves the charger alone."}, "help_manual": {"description": "Charges at the current you set, whatever the sun or the peak limit do."}, "current": "Current", "phases": "Phases", "phases_1": "1 phase", "phases_3": "3 phases", "why": "Why", "mode_solar": "Solar", "help_solar": {"description": "Charges only from spare sun and pauses when there is too little."}, "first": "Spare sun goes first to", "first_batteries": "Batteries", "first_car": "Car", "first_help": {"description": "Batteries: the car gets sun only when the batteries charge at full power or are full."}},
"attention": {"name": "Needs attention", "nothing": "Nothing to look at", "to_look": "to look at", "details": "Details", "alarm": "Alarm", "warning": "Warning", "info": "Info"},
"control": {"name": "Control", "stop": "Stop control", "start": "Start control", "maint_start": "Start a battery cycle now", "maint_abort": "Stop the battery cycle", "docs": "Add-on documentation", "more": "More actions"},
"details": {"name": "Details for installers", "rows": "Status rows", "checks": "Checks", "event": "Last event"},
@@ -302,11 +302,11 @@
"warning": "See Needs attention below."
},
"car": {
"state": {"charging": "Charging", "waiting": "Connected, waiting", "none": "No car connected", "full": "Car is full", "unreach": "Charger not reachable", "setup": "Charger not set up", "fault": "Charger fault", "wait": "No reading yet"},
"big": {"waiting": "Connected, not charging.", "none": "Nothing to charge.", "full": "The car is full.", "seen": "Last seen at {t}.", "no_reading": "No reading.", "setup": "Not set up.", "fault": "The charger reports a fault.", "wait": "No reading yet."},
"state": {"charging": "Charging", "waiting": "Connected, waiting", "none": "No car connected", "full": "Car is full", "unreach": "Charger not reachable", "setup": "Charger not set up", "fault": "Charger fault", "wait": "No reading yet", "paused": "Waiting for sun"},
"big": {"waiting": "Connected, not charging.", "none": "Nothing to charge.", "full": "The car is full.", "seen": "Last seen at {t}.", "no_reading": "No reading.", "setup": "Not set up.", "fault": "The charger reports a fault.", "wait": "No reading yet.", "paused": "Waiting for spare sun."},
"phase_one": "1 phase",
"phase_many": "{n} phases",
"today": "{kwh} charged today.",
"today": "{kwh} charged today.", "today_sun": "{kwh} charged today, {sun} from the sun.", "and": "and",
"why": {
"charging": "The charger is charging the car. The add-on leaves it alone.",
"waiting": "The car is connected and not charging. The add-on leaves the charger alone.",
@@ -329,7 +329,21 @@
"manual_wait": "You set {a} A. It is set when a car is connected.",
"manual_would": "Shadow mode: the add-on would set {a} A, {phases}.",
"manual_stopped": "Control is stopped. The charger keeps its last setting.",
"manual_blocked": "The phases change once per 10 minutes at most. This waits."
"manual_blocked": "The phases change once per 10 minutes at most. This waits.",
"solar_batt": "Batteries first: {a} at full power, {b} is full. The car gets the {kw} left, less {m} kept back.",
"solar_batt_room": "Batteries first: {a} at full power. The car gets the {kw} left, less {m} kept back.",
"solar_batt_full": "Batteries first, and the batteries are full. The car gets the {kw} left, less {m} kept back.",
"solar_car": "Car first: the car takes {kw} on {phases}. The batteries get the rest of the sun.",
"solar_hold": "Too little spare sun, so the car holds 6 A for now. It pauses after {s} minutes like this.",
"solar_paused": "Too little spare sun for the car's minimum of 6 A. It starts after {s} minutes of enough sun.",
"solar_start": "There is enough spare sun now. The car starts after {s} minutes of it.",
"solar_cut": "The car was cut first to stay under the peak limit. It starts again after {s} minutes of enough sun.",
"solar_unknown": "The add-on cannot measure the spare sun now. The car pauses if this lasts.",
"solar_would": "Shadow mode: the add-on would keep the car paused.",
"solar_stopped": "Control is stopped, so the add-on paused the car.",
"solar_error": "The charger reports an error, so the add-on paused the car.",
"solar_stuck": "The charger reading may be stuck, so the add-on paused the car.",
"solar_other": "Something else changes the charger, so the add-on leaves it alone."
}
},
"peak": {
+19 -5
View File
@@ -88,7 +88,7 @@
"loading": "De prognose wordt geladen."
},
"peak": {"name": "Piekgrens", "this_month": "Piek van deze maand", "limit": "Grens", "none": "Nog niets gemeten", "unreadable": "Nu niet leesbaar"},
"car": {"name": "Auto", "mode": "Modus", "mode_off": "Uit", "mode_manual": "Handmatig", "help_off": {"description": "De add-on laat de laadpaal met rust."}, "help_manual": {"description": "Laadt met de stroom die u instelt, wat de zon of de piekgrens ook doen."}, "current": "Stroom", "phases": "Fasen", "phases_1": "1 fase", "phases_3": "3 fasen", "why": "Waarom"},
"car": {"name": "Auto", "mode": "Modus", "mode_off": "Uit", "mode_manual": "Handmatig", "help_off": {"description": "De add-on laat de laadpaal met rust."}, "help_manual": {"description": "Laadt met de stroom die u instelt, wat de zon of de piekgrens ook doen."}, "current": "Stroom", "phases": "Fasen", "phases_1": "1 fase", "phases_3": "3 fasen", "why": "Waarom", "mode_solar": "Zon", "help_solar": {"description": "Laadt alleen met zonne-overschot en pauzeert als er te weinig is."}, "first": "Zonne-overschot gaat eerst naar", "first_batteries": "Batterijen", "first_car": "Auto", "first_help": {"description": "Batterijen: de auto krijgt pas zon als de batterijen op vol vermogen laden of vol zijn."}},
"attention": {"name": "Vraagt aandacht", "nothing": "Niets om na te kijken", "to_look": "na te kijken", "details": "Details", "alarm": "Alarm", "warning": "Waarschuwing", "info": "Info"},
"control": {"name": "Regeling", "stop": "Regeling stoppen", "start": "Regeling starten", "maint_start": "Nu een batterijcyclus starten", "maint_abort": "Batterijcyclus stoppen", "docs": "Documentatie van de add-on", "more": "Meer acties"},
"details": {"name": "Details voor installateurs", "rows": "Statusregels", "checks": "Controles", "event": "Laatste gebeurtenis"},
@@ -256,11 +256,11 @@
"pill": {"running": "Actief", "shadow": "Schaduwmodus", "stopped": "Gestopt", "alarm": "Heeft u nu nodig", "waiting": "Wacht op Home Assistant", "warning": "Actief, met een waarschuwing"},
"banner_sub": {"running": "De batterijen volgen het plan hieronder.", "shadow": "De plannen hieronder tonen wat de add-on zou doen.", "stopped": "Start de regeling hieronder als u klaar bent.", "alarm": "Zie Vraagt aandacht hieronder voor wat u moet doen.", "waiting": "De regeling gaat vanzelf verder zodra Home Assistant antwoordt.", "warning": "Zie Vraagt aandacht hieronder."},
"car": {
"state": {"charging": "Laadt", "waiting": "Aangesloten, wacht", "none": "Geen auto aangesloten", "full": "Auto is vol", "unreach": "Laadpaal onbereikbaar", "setup": "Laadpaal niet ingesteld", "fault": "Laadpaalstoring", "wait": "Nog geen meting"},
"big": {"waiting": "Aangesloten, laadt niet.", "none": "Niets te laden.", "full": "De auto is vol.", "seen": "Laatst gezien om {t}.", "no_reading": "Geen meting.", "setup": "Niet ingesteld.", "fault": "De laadpaal meldt een storing.", "wait": "Nog geen meting."},
"state": {"charging": "Laadt", "waiting": "Aangesloten, wacht", "none": "Geen auto aangesloten", "full": "Auto is vol", "unreach": "Laadpaal onbereikbaar", "setup": "Laadpaal niet ingesteld", "fault": "Laadpaalstoring", "wait": "Nog geen meting", "paused": "Wacht op zon"},
"big": {"waiting": "Aangesloten, laadt niet.", "none": "Niets te laden.", "full": "De auto is vol.", "seen": "Laatst gezien om {t}.", "no_reading": "Geen meting.", "setup": "Niet ingesteld.", "fault": "De laadpaal meldt een storing.", "wait": "Nog geen meting.", "paused": "Wacht op zonne-overschot."},
"phase_one": "1 fase",
"phase_many": "{n} fasen",
"today": "Vandaag {kwh} geladen.",
"today": "Vandaag {kwh} geladen.", "today_sun": "Vandaag {kwh} geladen, {sun} van de zon.", "and": "en",
"why": {
"charging": "De laadpaal laadt de auto. De add-on laat haar met rust.",
"waiting": "De auto is aangesloten en laadt niet. De add-on laat de laadpaal met rust.",
@@ -283,7 +283,21 @@
"manual_wait": "U stelde {a} A in. Het wordt ingesteld zodra een auto is aangesloten.",
"manual_would": "Schaduwmodus: de add-on zou {a} A instellen, {phases}.",
"manual_stopped": "De regeling is gestopt. De laadpaal houdt haar laatste instelling.",
"manual_blocked": "De fasen wisselen hooguit eens per 10 minuten. Dit wacht."
"manual_blocked": "De fasen wisselen hooguit eens per 10 minuten. Dit wacht.",
"solar_batt": "Eerst de batterijen: {a} op vol vermogen, {b} is vol. De auto krijgt de {kw} die overblijft, min {m} marge.",
"solar_batt_room": "Eerst de batterijen: {a} op vol vermogen. De auto krijgt de {kw} die overblijft, min {m} marge.",
"solar_batt_full": "Eerst de batterijen, en die zijn vol. De auto krijgt de {kw} die overblijft, min {m} marge.",
"solar_car": "Eerst de auto: die neemt {kw} op {phases}. De batterijen krijgen de rest van de zon.",
"solar_hold": "Te weinig zonne-overschot, dus de auto houdt nu 6 A. Na {s} minuten zo pauzeert ze.",
"solar_paused": "Te weinig zonne-overschot voor het minimum van de auto, 6 A. Ze start na {s} minuten genoeg zon.",
"solar_start": "Er is nu genoeg zonne-overschot. De auto start na {s} minuten daarvan.",
"solar_cut": "De auto werd eerst teruggeschroefd voor de piekgrens. Ze start weer na {s} minuten genoeg zon.",
"solar_unknown": "De add-on kan het zonne-overschot nu niet meten. De auto pauzeert als dit duurt.",
"solar_would": "Schaduwmodus: de add-on zou de auto gepauzeerd houden.",
"solar_stopped": "De regeling is gestopt, dus de add-on pauzeert de auto.",
"solar_error": "De laadpaal meldt een fout, dus de add-on pauzeert de auto.",
"solar_stuck": "De laadpaal meet mogelijk niet meer, dus de add-on pauzeert de auto.",
"solar_other": "Iets anders wijzigt de laadpaal, dus de add-on laat haar met rust."
}
},
"peak": {
+3
View File
@@ -234,6 +234,9 @@ GROUPS = (
Field("ev_phases", SEGMENTED, simple=True, show=_CAR),
Field("ev_batt_cover", TOGGLE, simple=True, show=_CAR),
Field("ev_mode_start", SEGMENTED, simple=True, show=_CAR),
Field("ev_margin_w", SLIDER, "W", step=10, show=_CAR),
Field("ev_start_min", SLIDER, "min", show=_CAR),
Field("ev_pause_min", SLIDER, "min", show=_CAR),
)),
)),
Group("maintenance", (
+11
View File
@@ -688,6 +688,17 @@ def _charger_problems(opts: dict, writers: dict) -> list[str]:
out.append(f"{S('ev_max_a')} is {messages.shown(opts.get('ev_max_a'))}"
f". Set it from {chargers.MIN_A:.0f} to "
f"{chargers.ENTITY_MAX_A:.0f} A.")
# EV-05: Solar's sun kept back and its two dwells, each in its range.
for key, (lo, hi) in chargers.SOLAR_RANGES.items():
raw = opts.get(key, chargers.EV_OPTION_DEFAULTS[key])
try:
v = float(raw)
ok = not isinstance(raw, bool) and v == v and lo <= v <= hi
except (TypeError, ValueError):
ok = False
if not ok:
out.append(f"{S(key)} is {messages.shown(raw)}. Set it from {lo} "
f"to {hi}.")
entity = chargers.census_entity(opts)
if entity and drivers.census_key(entity) in writers:
out.append(f"{S('ev_current_entity')} is {entity}, which an inverter "
+1 -1
View File
@@ -62,7 +62,7 @@ _LOG = logging.getLogger("goodwe.web")
# OPT-11: the per-battery actions, which name a battery and a value.
PACK_ACTIONS = ("pack_use", "pack_mode", "pack_sell")
CAR_ACTIONS = ("car_mode", "car_current", "car_phases")
CAR_ACTIONS = ("car_mode", "car_current", "car_phases", "car_sun_first")
# MAINT-11: start or stop one battery's maintenance cycle (the unit is optional).
MAINT_ACTIONS = ("maint_start", "maint_abort")
+13 -5
View File
@@ -873,20 +873,25 @@ options:
shadow_mode: "auto"
# ==========================================================================
# CAR CHARGER (EV-03 reads it, EV-04 adds Manual)
# CAR CHARGER (EV-03 reads it, EV-04 adds Manual, EV-05 Solar)
# ==========================================================================
# `off` is the shipped value and means NO CHANGE AT ALL: nothing is read,
# shown or announced, and the House tile and the house profile are as before.
# `alfen_ha` drives the charger through its Home Assistant integration. The
# mode (Off or Manual), the current and the phases are runtime state in the
# store, not options. `ev_batt_cover`: the batteries help with the peak while
# the car charges. `ev_mode_start`: the mode after a restart.
# mode (Off, Manual or Solar), the current, the phases and where spare sun
# goes first are runtime state in the store, not options. `ev_batt_cover`:
# the batteries help with the peak while the car charges. `ev_mode_start`:
# the mode after a restart. Solar: `ev_margin_w` sun kept back, and the car
# starts after `ev_start_min` of enough sun and pauses after `ev_pause_min`.
ev_charger: "off"
ev_current_entity: ""
ev_max_a: 16
ev_phases: "auto"
ev_batt_cover: true
ev_mode_start: "keep"
ev_margin_w: 100
ev_start_min: 2
ev_pause_min: 5
# ==========================================================================
# ADVANCED - the control law and diagnostics
@@ -1266,7 +1271,7 @@ schema:
shadow_mode: list(auto|on|off)
# ==========================================================================
# CAR CHARGER (EV-03 reads it, EV-04 adds Manual)
# CAR CHARGER (EV-03 reads it, EV-04 adds Manual, EV-05 Solar)
# ==========================================================================
# `ev_current_entity` is the charger's current setpoint; the other entities
# are found from its name. `ev_max_a` may not exceed the charger's own station
@@ -1277,6 +1282,9 @@ schema:
ev_phases: list(1|3|auto)
ev_batt_cover: bool
ev_mode_start: list(keep|off)
ev_margin_w: int(0,1000)
ev_start_min: int(1,30)
ev_pause_min: int(1,30)
# ==========================================================================
# ADVANCED - the control law and diagnostics
+7 -5
View File
@@ -905,16 +905,18 @@ check("it stays for an hour and then goes",
# --------------------------------------------------------------------------- #
print("\n9. THE MQTT SENSORS")
# --------------------------------------------------------------------------- #
check("the three car sensors are announced only with a charger on",
check("the car sensors (EV-05: four, with today's solar kWh) are announced "
"only with a charger on",
mqtt.optional_keys(CAR) == ("pv", "car_power", "car_state",
"car_today_kwh")
"car_today_kwh", "car_today_solar_kwh")
and mqtt.optional_keys(BASE) == ("pv",))
pl = dict(mqtt.discovery_payloads(include=mqtt.optional_keys(CAR)))
names = sorted(k for k in pl if "_car_" in k)
check(f"discovery announces three sensors, goodwe_car_power, "
f"goodwe_car_state and goodwe_car_today_kwh ({names})",
check(f"discovery announces the sensors goodwe_car_power, goodwe_car_state, "
f"goodwe_car_today_kwh and (EV-05) goodwe_car_today_solar_kwh ({names})",
[pl[k]["object_id"] for k in names] == [
"goodwe_car_power", "goodwe_car_state", "goodwe_car_today_kwh"]
"goodwe_car_power", "goodwe_car_state", "goodwe_car_today_kwh",
"goodwe_car_today_solar_kwh"]
and all(k.startswith("homeassistant/sensor/") for k in names))
check("...and no command entity (no select, number or switch for the car)",
not [k for k in pl if "car" in k and not k.startswith(
+25 -23
View File
@@ -248,7 +248,7 @@ async def part2():
w = World()
out = {}
out["manual"] = await w.act("car_mode", "manual")
out["bad_mode"] = await w.act("car_mode", "solar") # not in this card
out["bad_mode"] = await w.act("car_mode", "bogus") # EV-05 accepts Solar
out["night"] = await w.act("car_mode", "night")
out["a12"] = await w.act("car_current", 12)
out["a5"] = await w.act("car_current", 5)
@@ -266,7 +266,7 @@ w2, o2 = run(part2())
check("Manual is chosen at once, no restart", o2["manual"] == {
"mode": "manual", "current": 6.0, "phases": 1} and w2.c.car_mode == "manual"
or w2.c.car_mode == "manual")
check("Solar and Night are not accepted (EV-05, EV-02)",
check("Night (EV-02) and an unknown mode are not accepted",
"error" in o2["bad_mode"] and "error" in o2["night"]
and w2.c.car_mode == "manual")
check("a current between 6 A and the clamp is accepted and stored",
@@ -307,7 +307,7 @@ check("ev_phases 1: 3 phases cannot be chosen, 1 can",
async def part2c():
out = {}
for start, stored in (("keep", "manual"), ("off", "manual"),
("keep", None), ("keep", "solar")):
("keep", None), ("keep", "night")):
st = _Store()
if stored:
st.data["car_mode"] = stored
@@ -322,7 +322,7 @@ check("ev_mode_start keep: a restart keeps Manual",
check("ev_mode_start off: a restart starts in Off and the store says so",
o2c[("off", "manual")] == ("off", "off"))
check("no stored mode, or one this build does not know, is Off",
o2c[("keep", None)][0] == "off" and o2c[("keep", "solar")][0] == "off")
o2c[("keep", None)][0] == "off" and o2c[("keep", "night")][0] == "off")
# =========================================================================== #
print("\n3. MANUAL WRITES THE CURRENT ONCE PER USER CHANGE")
@@ -1606,13 +1606,14 @@ pl = dict(mqtt.car_payloads((16, (1, 3))))
sel = pl["homeassistant/select/goodwe_ctl_car_mode/config"]
num = pl["homeassistant/number/goodwe_ctl_car_current/config"]
ph = pl["homeassistant/select/goodwe_ctl_car_phases/config"]
check("three entities: select.goodwe_car_mode, number.goodwe_car_current, "
"select.goodwe_car_phases", len(pl) == 3
check("four entities: select.goodwe_car_mode, number.goodwe_car_current, "
"select.goodwe_car_phases and (EV-05) select.goodwe_car_sun_first",
len(pl) == 4
and sel["object_id"] == "goodwe_car_mode"
and num["object_id"] == "goodwe_car_current"
and ph["object_id"] == "goodwe_car_phases")
check("the mode's labels are English and pinned: Off, Manual (Solar and Night "
"are not offered)", sel["options"] == ["Off", "Manual"])
check("the mode's labels are English and pinned: Off, Manual, Solar (EV-05; "
"Night is not offered)", sel["options"] == ["Off", "Manual", "Solar"])
check("the current is 6 A to the clamp, whole amps", num["min"] == 6
and num["max"] == 16 and num["step"] == 1
and num["unit_of_measurement"] == "A")
@@ -1629,7 +1630,7 @@ check("nothing is announced without a charger (and the default announcement "
"is as it was)", mqtt.car_payloads(None) == []
and mqtt.discovery_payloads() == mqtt.discovery_payloads(car=None))
check("the car entities come after every other row",
[t for t, _ in mqtt.discovery_payloads(car=(16, (1, 3)))][-3:]
[t for t, _ in mqtt.discovery_payloads(car=(16, (1, 3)))][-4:]
== [t for t, _ in mqtt.car_payloads((16, (1, 3)))])
cmd = mqtt.parse_car_command
check("a command parses: mode, current, phases",
@@ -1641,8 +1642,8 @@ check("a command parses: mode, current, phases",
== ("car_phases", 3, None))
check("a retained command is dropped",
cmd("goodwe_ctl/car/mode/set", b"Manual", True)[2] == "retained")
check("Solar, Night, junk and a long payload are refused",
cmd("goodwe_ctl/car/mode/set", b"Solar", False)[1] is None
check("Night, an unknown mode, junk and a long payload are refused",
cmd("goodwe_ctl/car/mode/set", b"Bogus", False)[1] is None
and cmd("goodwe_ctl/car/mode/set", b"Night", False)[1] is None
and cmd("goodwe_ctl/car/current/set", b"abc", False)[1] is None
and cmd("goodwe_ctl/car/phases/set", b"2", False)[1] is None
@@ -1660,7 +1661,7 @@ async def ha_story():
out = {"mode": w.c.car_mode, "a": w.c.car_a, "rb": w.sim.readback_a,
"pub": list(w.c.mqtt.values)[-1]}
await w.c.mqtt_command("goodwe_ctl/car/mode/set", b"Off", True) # retained
await w.c.mqtt_command("goodwe_ctl/car/mode/set", b"Solar", False)
await w.c.mqtt_command("goodwe_ctl/car/mode/set", b"Night", False)
await w.c.mqtt_command("goodwe_ctl/car/current/set", b"99", False)
await w.c.mqtt_command("goodwe_ctl/car/phases/set", b"2", False)
await w.step(5)
@@ -1678,8 +1679,8 @@ check("HA commands go through handle_action(): Manual and 13 A are applied "
"and written, and the new state is published",
ha["mode"] == "manual" and ha["a"] == 13.0 and ha["rb"] == 13
and ha["pub"] == {"car_mode": "Manual", "car_current": 13,
"car_phases": "1"})
check("a retained command, Solar, 99 A and 2 phases change nothing",
"car_phases": "1", "car_sun_first": "Batteries"})
check("a retained command, Night, 99 A and 2 phases change nothing",
ha["after"] == ("manual", 13.0, 1))
check("the three states are in the published values",
ha["state"].get("car_mode") == "Manual"
@@ -1700,11 +1701,11 @@ st_ = _S()
car_, retract_ = _main.car_announcement(CAR, st_)
check("with a charger the entities are announced and their topics kept",
car_ == (16.0, (1, 3)) and not retract_ and len(
st_.data["mqtt_car_configs"]) == 3)
st_.data["mqtt_car_configs"]) == 4)
car2, retract2 = _main.car_announcement(BASE, st_)
check("turning the charger off removes exactly those entities",
car2 is None and sorted(retract2) == sorted(st_.data["mqtt_car_configs"])
and len(retract2) == 3)
and len(retract2) == 4)
st2 = _S()
check("a site that never had a charger publishes nothing and its store is "
"not written",
@@ -1734,7 +1735,7 @@ async def web_story():
("manual", {"action": "car_mode", "value": "manual"}),
("a", {"action": "car_current", "value": 12}),
("n", {"action": "car_phases", "value": 3}),
("solar", {"action": "car_mode", "value": "solar"}),
("solar", {"action": "car_mode", "value": "night"}),
("big", {"action": "car_current", "value": 40})):
async with s.post(root + "action", json=body) as r:
out[key] = (r.status, await r.json(content_type=None))
@@ -1753,21 +1754,22 @@ check("POST /action car_mode, car_current and car_phases store and answer",
web["manual"] == (200, {"ok": True, "result": {
"mode": "manual", "current": 6.0, "phases": 1}})
and web["a"][0] == 200 and web["n"][0] == 200)
check("...Solar and 40 A (above the clamp) are a 400 with a plain reason",
check("...Night and 40 A (above the clamp) are a 400 with a plain reason",
web["solar"][0] == 400 and web["solar"][1]["ok"] is False
and web["solar"][1]["error"] == messages.car_refused("value")
and web["big"][0] == 400)
car_s = web["status_en"]["car"]
check("/status gives the page what it needs: the mode, the modes offered (Off "
"and Manual only), the current's range, the phases",
car_s["mode"] == "manual" and car_s["modes"] == ["off", "manual"]
check("/status gives the page what it needs: the mode, the modes offered (Off, "
"Manual and, EV-05, Solar), the current's range, the phases",
car_s["mode"] == "manual"
and car_s["modes"] == ["off", "manual", "solar"]
and car_s["current"] == {"value": 12, "min": 6, "max": 16}
and car_s["phases"] == {"value": 3, "choices": [1, 3]})
check("/status in Dutch has the Dutch Why",
web["status_nl"]["car"]["why"].startswith("U stelde 12 A in"))
check("the page has the controls and no Solar or Night button",
check("the page has the controls and no Night button (EV-05 adds Solar)",
'id="car-manual"' in web["page"] and 'id="car-a"' in web["page"]
and "mode_solar" not in web["page"] and "mode_night" not in web["page"])
and "mode_night" not in web["page"])
check("the page names the Manual strings in both languages",
"Handmatig" in web["page"] and "Manual" in web["page"])
File diff suppressed because it is too large Load Diff
+421
View File
@@ -0,0 +1,421 @@
"""EV-05: the car's Solar mode, the long runs. `python3 -B test_ev05_long.py`
Split from test_ev05.py so CI's parallel batch stays short: the shadow-mode
twin (T39), the acceptance day (T44), the fuzz (T45), and the hour-long
"nothing else changes" comparisons (T50, T51). Same harness,
`tools/ev05_sun.py`; the rows are named by their test-plan id.
Mutating a module this file grades? Read MUTATION.md first (purge __pycache__).
"""
import logging
import math
import os
import random
import sys
HERE = os.path.dirname(os.path.abspath(__file__))
sys.path.insert(0, os.path.join(HERE, "tools"))
import ev05_sun as S # noqa: E402
from chargersim import SimCharger # noqa: E402
logging.disable(logging.CRITICAL)
fails = []
def check(name, cond):
print(f" {'ok ' if cond else 'FAIL'} {name}")
if not cond:
fails.append(name)
def const(w):
return lambda t: float(w)
def steps(*pairs):
def f(t):
v = pairs[0][1]
for at, w in pairs:
if t >= at:
v = w
return float(v)
return f
def cur(r):
return S.writes(r, "current")
def ph(r):
return S.writes(r, "phases")
FULL = {"a": 100.0, "b": 100.0}
ABLE = {"a": 60.0, "b": 60.0}
def quarters(r, aim):
"""(start, import average, car average) of each whole quarter."""
out = []
tr = r["trace"]
for q0 in range(0, int(tr[-1]["t"]) + 1 - 900, 900):
xs = [x for x in tr if q0 <= x["t"] < q0 + 900]
if len(xs) < 890:
continue
g = sum(max(0.0, x["grid"]) for x in xs) / len(xs)
car = sum(x["car"] for x in xs) / len(xs)
out.append((q0, g, car))
return out
def seq_ok(r):
"""Every select: a 0 A write before it, the car under 100 W or out of C or
20 s after the 0 A, then 10 s or more to the next current; no other write
in between."""
log = r["sim"].log
state = {x["t"]: x["st"] for x in r["trace"]}
bad = []
for i, x in enumerate(log):
if x[1] != "phases":
continue
prev = log[i - 1] if i else None
nxt = log[i + 1] if i + 1 < len(log) else None
if prev is None or prev[1] != "current" or prev[2] != 0.0:
bad.append(("no 0 A before", x))
continue
quiet = (x[3] < 100.0 or state.get(x[0] - 1) != "C"
or x[0] - prev[0] >= 20.0)
if not quiet or x[4] != 0.0:
bad.append(("select under load", x))
if nxt is not None and (nxt[1] != "current" or nxt[0] - x[0] < 10.0):
bad.append(("current too soon or not next", x, nxt))
return bad
def inv_sets(r):
return [x for x in r["plant"].sets if x[1].startswith("number.sp_")]
# =========================================================================== #
print("\nT39. SHADOW MODE: NOTHING WRITTEN, THE CARD SAYS WHAT IT WOULD SET (N10)")
# =========================================================================== #
def cloudy(t):
k = int(t) // 240
return 900.0 + (2600.0 if k % 3 else 400.0) + 300.0 * (k % 5)
twin = S.drive(house=const(500.0), sun=cloudy, first="car", socs=FULL,
opts={"ev_phases": "1"}, dur=3600)
for name, kw in (("on", dict(opts={"ev_phases": "1", "shadow_mode": "on"})),
("auto, control stopped",
dict(opts={"ev_phases": "1", "shadow_mode": "auto"},
events={0: lambda p, c: setattr(c, "auto", False)}))):
sh = S.drive(house=const(500.0), sun=cloudy, first="car", socs=FULL,
dur=3600, **kw)
diff = [(a["t"], a["a"], (b["would"] or (None,))[0])
for a, b in zip(twin["trace"], sh["trace"])
if b["would"] is not None and a["a"] != b["would"][0]]
check(f"T39 shadow {name}: the charger log is empty for a cloudy hour, and "
f"every second the card's 'would set' is the current of a twin run "
f"without shadow mode ({len(diff)} seconds differ: {diff[:3]})",
sh["sim"].log == [] and not diff
and len({a['a'] for a in twin['trace']}) >= 3)
# =========================================================================== #
print("\nT50, T51. NOTHING ELSE CHANGES FOR THE GUARD AND THE ZERO-GRID LOOP")
# =========================================================================== #
h50 = steps((0, 400.0), (600, 2600.0), (900, 800.0), (1800, 4200.0),
(2100, 300.0), (3000, 1500.0))
r50 = S.drive(house=h50, sun=const(0.0), plug=False, dur=3600)
r50o = S.drive(house=h50, sun=const(0.0), plug=False, dur=3600,
opts={"ev_charger": "off"})
check(f"T50: Solar with no car for an hour: the guard's floor and every battery "
f"command are identical to the run with no charger "
f"({len(inv_sets(r50))} commands)", inv_sets(r50) == inv_sets(r50o)
and [x["floor"] for x in r50["trace"]]
== [x["floor"] for x in r50o["trace"]] and cur(r50) == [])
sun51 = steps((0, 3000.0), (700, 5200.0), (1500, 2500.0))
r51 = S.drive(house=const(400.0), sun=sun51, first="car", socs=ABLE,
dur=2000)
carp = {int(x["t"]): x["car"] for x in r51["trace"]}
r51o = S.drive(house=lambda t: 400.0 + carp.get(math.ceil(t), 0.0),
sun=sun51, socs=ABLE, dur=2000, opts={"ev_charger": "off"})
check(f"T51: Car first, the zero-grid loop: the same meter series with the car "
f"as a Solar car and as house load gives the same battery commands "
f"({len(inv_sets(r51))} commands)", inv_sets(r51) == inv_sets(r51o)
and max(carp.values()) > 3000)
check("T51: the batteries charge with what the car leaves (Car first)",
-300 <= r51["plant"].batt(1999) <= 0)
# =========================================================================== #
print("\nT44. THE ACCEPTANCE DAY: 08:00-18:00, CLOUDS, HOUSE STEPS (A2)")
# =========================================================================== #
_rnd44 = random.Random(44)
CLOUDS44 = []
for _i in range(12):
a = _rnd44.randint(600, 34000)
CLOUDS44.append((a, a + _rnd44.randint(60, 480)))
STEPS44 = [(8000, 8300), (17000, 17300), (26000, 26300)]
def sun44(t):
base = max(0.0, 7500.0 * math.sin(math.pi * t / 36000.0))
return base * (0.15 if any(a <= t < b for a, b in CLOUDS44) else 1.0)
def house44(t):
w = 1450.0 + 1050.0 * math.sin(t / 1700.0)
return w + (3000.0 if any(a <= t < b for a, b in STEPS44) else 0.0)
long44 = sum(1 for a, b in CLOUDS44 if b - a > 300)
for first, race in (("batteries", False), ("car", True)):
# The batteries' levels move with their charge (A 15.36 kWh, B 20.48 kWh),
# so with Batteries first the car gets sun once they are full.
r44 = S.drive(house=house44, sun=sun44, first=first, socs={"a": 40.0,
"b": 60.0},
caps={"a": 15.36, "b": 20.48}, dur=36000, race=race)
# On the harness clock, as the trace (the model's own clock runs ahead).
w44 = [(x[0], x[2]) for x in r44["plant"].wlog if x[1] == "current"]
p44 = [(x[0], x[2]) for x in r44["plant"].wlog if x[1] == "phases"]
# A phase change's own 0 A (a select follows within 25 s) is not a pause.
seq0 = {t for t, v in w44 if v == 0.0 and any(0 < pt - t <= 25
for pt, _n in p44)}
starts, pauses, paused, pause_t = 0, 0, True, []
for t, v in w44:
if v == 0.0 and t not in seq0:
paused = True
pauses += 1
pause_t.append(t)
elif v > 0 and paused:
starts += 1
paused = False
why_at = {x["t"]: x["why"] for x in r44["trace"]}
cut_t = [t for t in pause_t if why_at.get(t) == "cut"
or why_at.get(t - 1) == "cut"]
# Car first: no hold pause from a cloud under 300 s. Batteries first: a
# battery that gave power in the cloud is under 100 % again, so its
# rating is room and the car waits for it (the brief's room rule).
short_hit = [t for t in pause_t if t not in cut_t and first == "car"
and any(a <= t <= b + 2 for a, b in CLOUDS44 if b - a <= 300)]
print(f" pauses (second, why): {[(t, why_at.get(t)) for t in pause_t]}")
# N5 on the whole day: a start 120 s or more after its pause, a hold
# pause after 300 s of holding, non-zero writes 30 s apart.
nz = [t for t, v in w44 if v > 0]
n5 = [("30 s", b) for a, b in zip(nz, nz[1:]) if b - a < 30]
last_p = None
for t, v in w44:
if v == 0.0 and t not in seq0:
last_p = t
elif v > 0 and last_p is not None:
if t - last_p < 120:
n5.append(("start", t))
last_p = None
for t in pause_t:
if why_at.get(t) == "paused":
run = 0
while why_at.get(t - 1 - run) == "hold":
run += 1
if run < 298:
n5.append(("pause", t, run))
# The loop turns at most `slew_w` per cycle, so for some 15 s after each
# current step, cloud edge and house step the grid covers the change:
# counted apart (dev report). The rest is the car on grid power while
# the loop is settled, outside the holds.
edges = [t for t, v in w44] + [e for ab in CLOUDS44 + STEPS44 for e in ab]
edges.sort()
def settling(t):
return any(0 <= t - e < 15 for e in edges)
grid_wh = sum(min(x["car"], max(0.0, x["grid"])) for x in r44["trace"]
if x["why"] not in ("hold",) and not settling(x["t"])) / 3600.0
slew_wh = sum(min(x["car"], max(0.0, x["grid"])) for x in r44["trace"]
if settling(x["t"])) / 3600.0
steps44 = edges
over44 = [(q, round(g)) for q, g, car in quarters(r44, 3400.0)
if g > 3410.0 and g - car <= 3410.0]
gaps = [b[0] - a[0] for a, b in zip(p44, p44[1:])]
check(f"T44 {first} first ({'race' if race else 'step'}): starts {starts} "
f"(<= 1 + {long44} long clouds + {len(cut_t)} peak cuts, Car first)"
f"; pauses {pauses}; N5 dwells {n5[:3]}; selects {len(p44)} "
f"(gaps >= 600 s: {gaps[:4]}); no pause from a short cloud "
f"{short_hit[:3]}; the car's grid energy outside holds {grid_wh:.1f} "
f"Wh (and {slew_wh:.1f} Wh in the loop's 15 s after "
f"{len(steps44)} steps and edges); quarters over the aim by the car "
f"{over44}",
starts >= 1 and not n5 and all(g >= 600 for g in gaps)
and (first != "car" or starts <= 1 + long44 + len(cut_t))
and not seq_ok(r44) and not short_hit and grid_wh <= 10.0
and not over44)
# =========================================================================== #
print("\nT45. THE FUZZ: 14 SITES, 16800 STEPS (N1-N10)")
# The plan asks 14 x 400 steps; a busy site rarely has the 60 s calm a start
# needs, so each site runs 1200 steps to make enough writes to judge.
# =========================================================================== #
def fuzz(seed):
rnd = random.Random(seed)
stations = [10.0, 13.0, 16.0]
st = {"sun": rnd.uniform(0, 9000), "house": rnd.uniform(200, 3000),
"n": {}, "acts": [], "undo": [], "exits": []}
def exit_check(p, c):
"""N9: Solar to Off with the charger above 0 A, reachable, taking
writes and not held by another writer: a 0 A must follow."""
ch = p.ch
if c.car_mode == "solar" and not c.car_solar.hold \
and not ch.unavailable and ch.refuse is None \
and ch.readback_a > 0.5 and not p.ha_down:
st["exits"].append(p.t)
def later(p, fn):
st["undo"].append((p.t + rnd.randint(10, 40), fn))
def ev(p, c):
for due in [u for u in st["undo"] if u[0] <= p.t]:
st["undo"].remove(due)
due[1]()
if st.get("back") is not None and p.t >= st["back"]:
st["back"] = None # the user goes back to Solar
st["acts"].append(p.t)
return c.handle_action("car_mode", value="solar")
if st.get("press") is not None and p.t >= st["press"]:
st["press"] = None # the user presses the mode
st["acts"].append(p.t)
return c.handle_action("car_mode", value=c.car_mode)
r = rnd.random()
ch = p.ch
if r < 0.012:
st["sun"] = rnd.choice([0.0, 1000.0, 2500.0, 5000.0, 8000.0,
8000.0, 6500.0])
elif r < 0.02:
st["house"] = rnd.uniform(200, 4000)
elif r < 0.08:
st["sun"] = max(0.0, st["sun"] + rnd.uniform(-600, 600))
elif r < 0.082:
if ch.state != "A":
ch.unplug()
later(p, ch.plug_in)
st["n"]["plug"] = st["n"].get("plug", 0) + 1
elif r < 0.084:
ch.go_unavailable(True)
later(p, lambda: ch.go_unavailable(False))
st["n"]["down"] = st["n"].get("down", 0) + 1
elif r < 0.087:
ch.set_current(rnd.randint(0, 16))
st["n"]["other"] = st["n"].get("other", 0) + 1
st["press"] = p.t + rnd.randint(20, 90)
elif r < 0.089:
ch.refuse = rnd.choice(["ignore", "error"])
later(p, lambda: setattr(ch, "refuse", None))
elif r < 0.091:
p.meter_on = False
later(p, lambda: setattr(p, "meter_on", True))
st["n"]["meter"] = st["n"].get("meter", 0) + 1
elif r < 0.093:
c.o["shadow_mode"] = "on"
later(p, lambda: c.o.__setitem__("shadow_mode", "off"))
st["n"]["shadow"] = st["n"].get("shadow", 0) + 1
elif r < 0.095:
c.auto = False
later(p, lambda: setattr(c, "auto", True))
st["n"]["stop"] = st["n"].get("stop", 0) + 1
elif r < 0.098:
m = rnd.choice(["solar", "solar", "solar", "off", "manual"])
st["n"]["mode"] = st["n"].get("mode", 0) + 1
st["acts"].append(p.t)
if m == "off":
exit_check(p, c)
return c.handle_action("car_mode", value=m)
elif r < 0.1:
ch.station_a = rnd.choice(stations)
elif r < 0.103 and c.car_mode == "solar" and p.ch.readback_a > 0.5 \
and st.get("back") is None:
exit_check(p, c) # leave Solar while it charges
st["acts"].append(p.t)
st["back"] = p.t + rnd.randint(30, 120)
return c.handle_action("car_mode", value="off")
elif r < 0.2 and c.car_solar.seq is not None:
st["n"]["mid"] = st["n"].get("mid", 0) + 1
exit_check(p, c)
return c.handle_action("car_mode", value="off")
ctx = []
def note(p, c, t):
ctx.append((t, c.car_mode, c.car_writing(), c.car_solar.single,
c.car_solar.hold, p.ch.station_a))
r = S.drive(house=lambda t: st["house"], sun=lambda t: st["sun"],
first="car", opts={"ev_margin_w": 0, "ev_start_min": 1,
"ev_pause_min": 1}, socs=FULL, dur=1200,
events={t: ev for t in range(1, 1200)}, on_cycle=note,
race=seed % 2 == 1, sim=SimCharger(setpoint_a=rnd.choice(
[0, 10, 16])))
bad = []
by_t = {x[0]: x for x in ctx}
log = r["plant"].wlog # on the harness clock
last_sel, last_nz = None, None
for t, what, v, power, sp in log:
# A write logged at second t comes after that second's actions.
x = by_t.get(t) or by_t.get(t - 1)
mode = x[1] if x else "?"
if what == "current" and v > min(16.0, x[5] if x else 16.0) + 1e-9:
bad.append(("N1 over the clamp", t, v))
if what == "phases":
if sp != 0.0:
bad.append(("N2 select with the setpoint up", t))
if last_sel is not None and t - last_sel < 600:
bad.append(("N2 two selects in 600 s", t))
last_sel = t
if what == "current" and mode == "off" and v > 0:
bad.append(("N10 a non-zero write in Off", t, v))
if what == "current" and x is not None and not x[2] and v > 0 \
and mode == "solar":
bad.append(("N10 a non-zero Solar write while not writing", t, v))
if what == "current" and v > 0 and mode == "solar":
near_act = any(abs(t - a) <= 3 for a in st["acts"])
if last_nz is not None and t - last_nz < 30 and not near_act:
bad.append(("N5 two non-zero writes under 30 s", t, v))
last_nz = t
for te in st["exits"]:
if not any(x[1] == "current" and x[2] == 0.0 and te <= x[0] <= te + 3
for x in log):
bad.append(("N9 Solar to Off left the current up", te))
if r["c"].charger.clamp_faults:
bad.append(("N1 clamp fault", r["c"].charger.clamp_faults))
st["n"]["exits"] = len(st["exits"])
return bad, len(log), st["n"]
fz_bad, fz_n, fz_counts = [], 0, {}
for _seed in range(14):
_b, _n, _c = fuzz(_seed)
fz_bad += _b
fz_n += _n
for k, v in _c.items():
fz_counts[k] = fz_counts.get(k, 0) + v
check(f"T45: {fz_n} charger writes over 14 random Solar sites and 16800 steps "
f"(outages, unplugs, refusals, other writers, a silent meter, shadow and "
f"Stop, mode changes, half racing): none over the clamp, no select with "
f"the setpoint up or two in 600 s, every Solar to Off at 0 A (N9), no "
f"non-zero write in Off, in shadow "
f"or stopped, none under 30 s apart ({fz_bad[:3]})",
not fz_bad and fz_n > 100)
check(f"T45: each disturbance happened ({fz_counts})",
all(fz_counts.get(k, 0) > 2 for k in ("plug", "down", "other", "meter",
"shadow", "stop", "mode",
"exits")))
print()
if fails:
print(f"{len(fails)} FAILED")
for f in fails:
print(" -", f)
sys.exit(1)
print("all passed")
+344
View File
@@ -0,0 +1,344 @@
"""EV-15: the add-on's own phase change at the peak reserve raises no alarm.
`python3 -B test_ev15.py`
The rig (EV-10 and EV-10b, F-2): cover on, the batteries at the reserve, the car
charging and explaining the excess. The add-on's own 3 -> 1 phase switch sets
the car to 0 A; with the car not charging its figure is no longer corroborated
(`CarTracker.corroborated`), so `car_alarm_w()` is None, nothing is explained,
and PEAK_GUARD_FLOOR_LIMITED plus `goodwe_peak_soc_floor` fire. The rule: for
the add-on's own sequence only (`ctl_car._car_own_pause`, bounded) the car's
fresh, not stuck figure stands in for grading.
1. The rig shapes end to end through the car cycle: 3 -> 1 and 1 -> 3.
2. A house overload that starts during the sequence still alarms, as on Off.
3. Aborted (Off, Stop, unplug), refused, an outside writer: no grace.
4. The bounds, and the figure that stands in (stale, stuck: nothing).
Mutating a module this file grades? Read MUTATION.md first (purge __pycache__).
"""
import asyncio
import logging
import os
import sys
HERE = os.path.dirname(os.path.abspath(__file__))
sys.path.insert(0, os.path.join(HERE, "tools"))
from app import ctl_car, carmode, chargers as CH # noqa: E402
import ev04_peak as P # noqa: E402
import safety81_sim as s81 # noqa: E402
logging.disable(logging.CRITICAL)
fails = []
def check(name, cond):
print(f" {'ok ' if cond else 'FAIL'} {name}")
if not cond:
fails.append(name)
def at(t, fn):
return {"t": t, "fn": fn}
def beside(plant, c):
"""The writer runs BESIDE the cycle, as in production (`car_kick`): its 1 s
poll for the read-back lands after the cycle's own read, and the cycle does
not wait for the writer (`ev04_peak.drive` does)."""
gate = asyncio.Event()
async def sleep(_s):
gate.clear()
await gate.wait()
async def settle():
gate.set()
for _ in range(5):
await asyncio.sleep(0)
c.charger._sleep = sleep
c.car_settle = settle
def run(house, cap, t_res, t_sw, new, *, extra=None, mode="manual",
sim_fn=None, dur=895, plug=True, side=False):
"""Reserve at `t_res`, our phase change to `new` at `t_sw`. Returns the
run, a per-second trace (second, own-pause, explains, red rows) and the
alarms."""
tr = []
def note(plant, c):
red = [x["id"] for x in c.checks()
if x["ok"] is False and not x["warn"]] \
if t_sw - 5 <= plant.t <= t_sw + 90 else []
g = c.peak_guard
lim = bool(g is not None and (g.floor_limited or g.saturated))
tr.append((plant.t, getattr(c, "_car_own_pause", lambda _t: False)(c.car_now()), c.car_explains,
red, plant.ch.power_w, plant.ch.state, lim))
def reserve(plant, c):
plant.soc = 19.0
plant.load = lambda t: house + plant.ch.power_w
def switch(plant, c):
asyncio.get_event_loop().create_task(
c.handle_action("car_phases", value=new))
ev = {t: note for t in range(0, dur)}
ev[t_res] = lambda p, c: (reserve(p, c), note(p, c))
ev[t_sw] = lambda p, c: (switch(p, c), note(p, c))
if side:
ev[t_sw - 2] = lambda p, c: (beside(p, c), note(p, c))
for t, fn in (extra or {}).items():
prev = ev.get(t, note)
ev[t] = (lambda p, c, prev=prev, fn=fn: (fn(p, c), prev(p, c)))
sim = None
if sim_fn is not None or side:
from chargersim import SimCharger
sim = SimCharger(setpoint_a=16)
sim_fn = sim_fn or (lambda s: None)
sim_fn(sim)
r = P.drive(s81.constant(house), dur=dur, rating=12000.0, soc=60.0,
cap=cap, phases=(3 if new == 1 else 1), user_a=16, setpoint=16,
mode=mode, events=ev, sim=sim, plug=plug)
return r, tr, P.ids(r, *P.ALARMS)
def reds(tr):
return [x for x in tr if x[3]]
# =========================================================================== #
print("1. THE RIG SHAPES THROUGH THE CAR CYCLE")
# =========================================================================== #
SHAPES = (
("EV-10 shape: house 3 kW, car 11 kW, aim 6 kW, 3 -> 1",
3000.0, 6050.0, 300, 600, 1),
("EV-10b shape: a 9411 W limit, 3 -> 1", 2000.0, 9461.0, 300, 600, 1),
("1 -> 3 (the car 3.7 kW, then 11 kW), aim 5 kW", 2500.0, 5050.0,
100, 600, 3),
)
for name, house, cap, t_res, t_sw, new in SHAPES:
r, tr, al = run(house, cap, t_res, t_sw, new)
c, sim = r["c"], r["sim"]
sw = [x for x in sim.writes() if x[1] == "phases"]
check(f"{name}: the car at the reserve covers, and the add-on's own "
f"sequence ran (0 A, select, the current back)",
len(sw) == 1 and [x[2] for x in sim.writes("current")][-2:]
== [0.0, 16.0] and sim.phases_allowed == new)
pause = [x for x in tr if x[1]]
check(f"{name}: the own-pause grace was on during it, and ended",
len(pause) >= 10 and not any(x[1] for x in tr[-1:])
and (pause[-1][0] - pause[0][0])
<= getattr(ctl_car, "OWN_PAUSE_MAX_S", 0)
+ getattr(ctl_car, "OWN_PAUSE_TAIL_S", 0))
check(f"{name}: no PEAK_GUARD_FLOOR_LIMITED / saturated, no "
f"goodwe_peak_soc_floor notification", al == [])
check(f"{name}: no red row in any sample around the switch",
reds(tr) == [])
limited = [x for x in tr if x[1] and x[6]]
check(f"{name}: in every cycle of the sequence in which the guard is "
f"limited (the cycle of the rig's alarm among them) the car "
f"explains it", len(limited) >= 1 and all(x[2] for x in limited)
and any(x[2] for x in tr if x[0] == t_sw + 1))
check(f"{name}: and in every limited cycle after it, to the quarter's end",
all(x[2] for x in tr if x[0] >= t_sw and x[6]))
# =========================================================================== #
print("\n2. A HOUSE OVERLOAD DURING THE SEQUENCE STILL ALARMS")
# =========================================================================== #
def overload(plant, c):
plant.load = lambda t: 25000.0 + plant.ch.power_w
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, extra={606: overload})
ro, tro, alo = run(3000.0, 6050.0, 300, 600, 1, extra={606: overload},
mode="off", plug=False)
rn, trn, aln = run(3000.0, 6050.0, 300, 900, 1, extra={606: overload})
check("PRECONDITION: on Off (no car) the same load alarms, and in Manual "
"with no phase change", alo != [] and aln != [])
check("a 25 kW house overload that starts 6 s into the sequence (the car "
"paused): the alarm fires", al != [])
print(f" alarm seconds: in the sequence {[t for t, _ in al]}, Off without "
f"the car {[t for t, _ in alo]}, Manual with no phase change "
f"{[t for t, _ in aln]}")
check("...at the same second as on Off and as in Manual with no phase change",
bool(al) and bool(alo) and bool(aln)
and al[0][0] == alo[0][0] == aln[0][0])
check("...and the car does not explain it (during the sequence too)",
not any(x[2] for x in tr if 640 <= x[0] <= 660))
# =========================================================================== #
print("\n3. ABORTED, REFUSED, OUTSIDE: NO GRACE AFTER IT")
# =========================================================================== #
def hit(res, t0, secs):
return [x for x in res if t0 <= x[0] <= t0 + secs and x[1]]
def off_now(plant, c):
asyncio.get_event_loop().create_task(c.handle_action("car_mode",
value="off"))
def stop_now(plant, c):
c.auto = False
def unplug(plant, c):
plant.ch.unplug()
slow = lambda s: setattr(s, "stop_delay_s", 8.0) # noqa: E731
for what, fn in (("Off", off_now), ("Stop", stop_now), ("unplug", unplug)):
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, extra={602: fn},
sim_fn=slow)
check(f"{what} 2 s into the sequence: the grace is off from the next "
f"cycle on", not hit(tr, 604, 200)
and any(x[1] for x in tr if 600 <= x[0] <= 602))
def refuse_phases(sim):
sim.request_phases = lambda n: False
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, sim_fn=refuse_phases)
check("the select is refused: the grace ends at once (no cycle of it after "
"the refusal), the current comes back",
len([x for x in r["sim"].writes("current")]) >= 2
and not hit(tr, 606, 200))
def outside_zero(plant, c):
plant.ch.set_current(0.0)
r2, tr2, al2 = run(3000.0, 6050.0, 300, 900, 1, extra={602: outside_zero})
check("an outside writer's 0 A: no grace, and the normal grading (no car "
"power: nothing explained) raises the alarm as before",
not any(x[1] for x in tr2) and not any(x[2] for x in tr2
if 610 <= x[0] <= 700)
and al2 != [])
# =========================================================================== #
print("\n4. THE BOUNDS AND THE FIGURE THAT STANDS IN")
# =========================================================================== #
class _C(ctl_car.CarMixin):
"""The mixin with just what `_car_own_pause` reads."""
def __init__(self):
self.o = {}
self.car_init({}, type("S", (), {"data": {}, "set": lambda s, k, v: 0})())
self.car_mode = carmode.MANUAL
self.auto, self.shadow = True, False
self.inverters, self.site_sign_wd = [], type("W", (), {"tripped": False})()
self.circ_wd = type("W", (), {"tripped": False})()
self.charger = type("H", (), {"configured": lambda s: True})()
self.car = CH.CarTracker()
self.car.reading = CH.ChargerReading(available=True, state="B")
c = _C()
c.car_writer.seq = {"stage": "settle", "t0": 100.0, "n": 1, "tries": 0,
"prev": 16.0}
M = ctl_car.OWN_PAUSE_MAX_S
check("bound: the sequence's own maximum is its waits (0 A wait, settle, "
"three tries at 15 s, the select) and no more",
M == carmode.ZERO_WAIT_S + carmode.SETTLE_S + carmode.MAX_TRIES * 15.0
+ 10.0 and ctl_car.OWN_PAUSE_TAIL_S == CH.CORR_WINDOW_S)
check("bound: on at the 0 A write and up to the maximum",
c._car_own_pause(100.0) and c._car_own_pause(100.0 + M))
check("bound: off one second past it", not c._car_own_pause(101.0 + M))
c.car_writer.seq = None
c.car_writer.phase_done_at = 200.0
T = ctl_car.OWN_PAUSE_TAIL_S
check("bound: after the current is set again it lasts one corroboration "
"window", c._car_own_pause(200.0 + T) and not c._car_own_pause(201.0 + T))
c.car_writer.phase_done_at = None
check("no sequence and none just done: no grace", not c._car_own_pause(100.0))
c.car_writer.seq = {"stage": "settle", "t0": 100.0, "failed": True}
check("a refused write marks the sequence: no grace", not c._car_own_pause(110.0))
c.car_writer.seq = {"stage": "settle", "t0": 100.0}
c.car_mode = carmode.OFF
check("Off: no grace", not c._car_own_pause(110.0))
c.car_mode, c.shadow = carmode.MANUAL, True
check("shadow mode: no grace", not c._car_own_pause(110.0))
c.shadow, c.auto = False, False
check("control stopped: no grace", not c._car_own_pause(110.0))
c.auto = True
c.car_writer.hold = True
check("another writer (hold): no grace", not c._car_own_pause(110.0))
c.car_writer.hold = False
c.car_writer.seq, c.car_writer.zero_sent_at = None, 100.0
check("0 A sent, not yet back: grace from the send, to the maximum, no more",
c._car_own_pause(100.0) and c._car_own_pause(100.0 + M)
and not c._car_own_pause(101.0 + M))
c.car_writer.zero_sent_at = None
c.car_writer.phase_done_at = 200.0
c.car_writer.hold = True
check("another writer in the 60 s after the current is set: no grace",
not c._car_own_pause(210.0))
c.car_writer.hold, c.car_writer.phase_done_at = False, None
c.car_writer.seq = {"stage": "settle", "t0": 100.0}
c.car.reading = CH.ChargerReading(available=True, state="A")
check("unplugged: no grace", not c._car_own_pause(110.0))
c.car.reading = CH.ChargerReading(available=True, state="B")
check("PRECONDITION: the same state is on", c._car_own_pause(110.0))
tk = CH.CarTracker()
tk.reading = CH.ChargerReading(available=True, state="B", power_w=500.0,
allowed_a=16.0, phases_allowed=1)
tk.last_ok = 0.0
check("the stand-in figure is the fresh reading, capped by the read-back",
tk.car_w_paused(5.0) == 500.0 and tk.car_w_trusted(5.0) is None)
check("a stale reading stands in for nothing", tk.car_w_paused(100.0) is None)
tk.stuck_now = True
check("a stuck reading stands in for nothing", tk.car_w_paused(5.0) is None)
# =========================================================================== #
print("\n5. THE WRITER RUNS BESIDE THE CYCLE (review F-1)")
# =========================================================================== #
# The car stops (state B) in the same Home Assistant update as the 0 A
# read-back; the write has not returned yet, so no sequence exists. The window
# opens when the write is SENT (`ManualWriter.zero_sent_at`).
def lagged(lag, delay):
def f(s):
s.lag_s, s.stop_delay_s = lag, delay
return f
for lag, delay in ((2, 0), (0, 0), (2, 3), (5, 2)):
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, side=True,
sim_fn=lagged(lag, delay))
nm = f"beside the cycle, lag {lag} s, stop delay {delay} s"
limited = [x for x in tr if x[0] >= 600 and x[6]]
check(f"{nm}: our sequence ran (select once, then 16 A again)",
len([x for x in r["sim"].writes("phases")]) == 1
and r["sim"].phases_allowed == 1
and [x[2] for x in r["sim"].writes("current")][-2:] == [0.0, 16.0])
check(f"{nm}: no PEAK_GUARD_FLOOR_LIMITED, no goodwe_peak_soc_floor",
al == [])
check(f"{nm}: no red row, and the car explains every limited cycle",
reds(tr) == [] and all(x[2] for x in limited))
def not_taken(plant, c):
plant.ch.refuse = "ignore" # HA accepts, the charger does nothing
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, side=True,
sim_fn=lagged(0, 0), extra={600: not_taken})
check("the 0 A write is not taken (read-back never follows): the window was "
"open while it waited", any(x[1] for x in tr if 600 <= x[0] <= 606))
own = [x[0] for x in tr if x[1]]
runs = 1 + len([1 for a, b in zip(own, own[1:]) if b - a > 1])
check("...and no grace after the refusal (the retry, RETRY_S later, opens it "
"again only while that write waits: at most 3 runs of 11 s), no "
"sequence made", not hit(tr, 613, 40) and r["c"].car_writer.seq is None
and 1 <= runs <= 3 and len(own) <= 3 * 11)
check("...the car went on charging and nothing was written but the 0 A",
r["sim"].power_w > 5000.0 and not r["sim"].writes("phases"))
print()
if fails:
print(f"FAIL: {len(fails)} check(s)")
for f in fails:
print(" -", f)
sys.exit(1)
print("ok: EV-15")
+290
View File
@@ -0,0 +1,290 @@
#!/usr/bin/env python3
"""EV-05: the real Controller on a sunny plant with N batteries and a car.
python3 tools/ev05_sun.py # mock-up scenario 2, both priorities
A 1 s cycle, a P1 meter that publishes 0.3 s before each cycle, N batteries
each with ITS OWN rating and level (switched On, so the zero-grid loop charges
them from the export), and `chargersim.SimCharger` behind the same Home
Assistant. The meter sees `house + car - sun - batteries` (battery discharge
positive), so the spare sun the add-on computes is `sun - house` whatever it
does. A battery at 100 % takes no charge. `events` is `{second: fn(plant, c)}`,
run before that cycle. `race=True` uses the production order (read, the writer
task settles, then the cycle), as test_ev04.py's `World.step_race`.
Used by test_ev05.py and, later, by the rig test."""
import asyncio
import logging
import os
import sys
import tempfile
from datetime import timedelta
HERE = os.path.dirname(os.path.abspath(__file__))
sys.path.insert(0, HERE)
import opt11_identity as rig # noqa: E402
import main_files # noqa: E402
from app import packmode # noqa: E402
from app.main import Controller # noqa: E402
from app.p1 import make_sample, split_signed # noqa: E402
from app.store import unit_key # noqa: E402
from chargersim import SimCharger # noqa: E402
from app import p1 as _p1 # noqa: E402
SET = "number.wallbox_power_connector_max_current_socket_1"
PHASES = "select.wallbox_installation_max_allowed_phases"
ALARMS = ("goodwe_peak_saturated", "goodwe_peak_soc_floor")
RESPONSE_S = 0.5 # a battery reaches its new command this much later
SAMPLE_LEAD_S = 0.3
class SunPlant:
"""The house, the sun, N batteries and the charger on one meter."""
def __init__(self, house, sun, ratings, socs, charger):
self.house, self.sun = house, sun
self.ratings, self.socs = dict(ratings), dict(socs)
self.ch = charger
self.t = 0.0
self.hists = {u: [(-1e9, 0.0)] for u in self.ratings}
self.notes = [] # (t, notification id) raised
self.dismissed = []
self.sets = [] # (t, entity, value): every number write
# Every charger write the model took, as `SimCharger.log` has it but
# on THIS clock (the model's own runs ahead while a write waits).
self.wlog = []
self.meter = 0.0
self.meter_on = True # False: the meter stops publishing
self.batt_nan = set() # units whose battery figure reads None
self.utc_off = 0.0 # the wall clock jumps, the model clock not
self.ha_down = False # Home Assistant answers nothing (SAFETY-112)
def batt_of(self, u, at):
w = 0.0
for when, v in self.hists[u]:
if when <= at:
w = v
r = self.ratings[u]
w = max(-r, min(r, float(round(w))))
if self.socs[u] >= 100.0 and w < 0.0:
w = 0.0 # a full battery takes no charge
return w
def batt(self, at):
return sum(self.batt_of(u, at) for u in self.ratings)
def grid(self, at):
return self.house(at) + self.ch.power_w - self.sun(at) - self.batt(at)
# -- Home Assistant -----------------------------------------------------
async def limits(self, e):
return (-5000.0, 5000.0, 1.0)
async def state(self, entity_id):
if self.ha_down:
return None
return self.ch.states().get(entity_id)
async def states(self):
if self.ha_down:
return []
return list(self.ch.states().values())
async def call(self, domain, service, data=None):
if self.ha_down:
return False
if service == "create":
self.notes.append((self.t, (data or {}).get("notification_id")))
if service == "dismiss":
self.dismissed.append((self.t, (data or {}).get("notification_id")))
if domain == "select" and service == "select_option":
n = 3 if "3" in str((data or {}).get("option")) else 1
return self._logged("phases", n, self.ch.request_phases)
return True
def _logged(self, what, v, fn):
n0, row = len(self.ch.log), (self.t, what, v, self.ch.power_w,
self.ch.setpoint_a)
ok = fn(v)
if len(self.ch.log) > n0:
self.wlog.append(row)
return ok
async def number(self, e, invert=False):
if self.ha_down:
return None
for u in self.ratings:
if e == "sensor.soc_" + u:
return self.socs[u]
if e == "sensor.batt_" + u:
return None if u in self.batt_nan else self.batt_of(u, self.t)
if e in ("sensor.grid", "sensor.net"):
return self.meter
return None
async def set_number(self, e, v):
if self.ha_down:
return False
self.sets.append((self.t, e, float(v)))
if e == SET:
return self._logged("current", float(v), self.ch.request_current)
if e.startswith("number.sp_"):
self.hists[e[-1]].append((self.t + RESPONSE_S, float(v)))
return True
def drive(house, sun, *, dur=600.0, ratings=None, socs=None, cap=3500.0,
margin=100, opts=None, plug=True, setpoint=0, phases=1, mode="solar",
first="batteries", events=None, sim=None, store=None, race=False,
on_cycle=None, car_phases=3, t0=0.0, caps=None):
"""Run it. Returns a dict: plant, controller, charger, notifications with
their second, and a per-second trace. `caps` ({unit: kWh}) lets each
battery's level move with what it charges or gives; without it the
levels stand still."""
ratings = ratings or {"a": 5000.0, "b": 4600.0}
socs = socs or {u: 50.0 for u in ratings}
sim = sim or SimCharger(setpoint_a=setpoint)
if plug:
sim.plug_in(car_phases=car_phases)
sim.phases_allowed = phases
units = sorted(ratings)
o = rig._options(len(units), dict({
"meter_source": "ha_signed", "p1_net_entity": "sensor.net",
"meter_phases": 1, "peak_cap_w": cap, "peak_margin_w": margin,
"battery_modes_enabled": True,
"ev_charger": "alfen_ha", "ev_max_a": 16, "ev_phases": "auto",
"ev_current_entity": SET}, **(opts or {})))
if len(units) == 1:
o["max_w"] = ratings[units[0]]
else:
o["inverters"] = [dict(x, max_w=ratings[x["name"][-1]])
for x in o["inverters"]]
store = store or rig._Store()
store.data["car_mode"] = mode
store.data["car_sun_first"] = first
for u in units:
store.data[unit_key("inverter-" + u, packmode.USE_KEY)] = True
db = os.path.join(tempfile.mkdtemp(prefix="ev5-"), "tariff.db")
out = {}
events_in = events or {}
async def go():
plant = SunPlant(house, sun, ratings, socs, sim)
c = Controller(o, plant, store, rig._Pub(), stop=asyncio.Event(),
peak_db_path=db)
for i in c.inverters:
r = ratings[i.name[-1]] if len(units) > 1 else ratings[units[0]]
i.dev_min, i.dev_max = -r, r
c.auto = True
clock = [t0]
c.car_now = lambda: clock[0]
real_time = _p1.time
class _Time:
"""The meter's age on the model clock, so a silent meter goes
stale in model seconds."""
def __getattr__(self, k):
return getattr(real_time, k)
@staticmethod
def monotonic():
return clock[0]
_p1.time = _Time()
if hasattr(c.charger, "_sleep"):
async def sleep(s):
sim.tick(s)
clock[0] += s
c.charger._sleep = sleep
c.charger._clock = lambda: clock[0]
real_dt = main_files.live.datetime
class _DT(real_dt):
@classmethod
def now(cls, tz=None):
return rig.BASE + timedelta(seconds=clock[0] + plant.utc_off)
main_files.live.datetime = _DT
trace = []
try:
t = t0
while t < t0 + dur:
plant.t = clock[0] = t
fn = events_in.get(int(t)) if t == int(t) else None
if fn is not None:
r = fn(plant, c)
if asyncio.iscoroutine(r):
await r
sim.tick(1.0)
ts = t - SAMPLE_LEAD_S
if plant.meter_on and not plant.ha_down:
plant.meter = plant.grid(ts)
imp, exp = split_signed(plant.meter)
c.p1.submit(make_sample(
"ha_signed", imp, exp, phases=1,
ingest_ts=rig.BASE + timedelta(seconds=ts),
ingest_mono=ts))
await c.read_inputs(now_mono=t)
if race:
await c.car_settle()
await c.cycle()
else:
await c.cycle()
await c.car_settle()
w = c.car_solar
g = c.peak_guard
trace.append(dict(
t=t, a=w.plan.a, why=w.plan.why, n=w.plan.n,
sp=sim.setpoint_a, rb=sim.readback_a,
ph=sim.phases_allowed, car=sim.power_w, st=sim.state,
grid=plant.grid(t), batt=plant.batt(t),
house=plant.house(t), sun=plant.sun(t),
cut=c.car_cut_w, explains=c.car_explains,
lim=bool(g is not None and (g.floor_limited
or g.saturated)),
floor=(None if g is None else g.floor_w),
excess=(None if g is None else g.excess_w),
proj=(None if g is None else g.projected_w),
target=(None if g is None else g.target_w),
would=w.would, single=w.single,
spare=c.car_spare_w(t), ok=w.plan.ok_since,
red=[x["id"] for x in c.checks()
if x["ok"] is False and not x["warn"]]
if on_cycle == "rows" else []))
if callable(on_cycle):
on_cycle(plant, c, t)
for u, kwh in (caps or {}).items():
lv = plant.socs[u] - plant.batt_of(u, t) / 36.0 / kwh
plant.socs[u] = max(0.0, min(100.0, lv))
t += 1.0
await c.car_settle()
finally:
main_files.live.datetime = real_dt
_p1.time = real_time
out.update(plant=plant, c=c, sim=sim, trace=trace, store=store,
raised=list(plant.notes))
asyncio.run(go())
return out
def ids(out, *wanted):
return [(t, n) for t, n in out["raised"] if n in wanted]
def writes(out, what="current"):
"""(t, value) of every charger write of that kind, in model seconds."""
return [(x[0], x[2]) for x in out["sim"].writes(what)]
def const(w):
return lambda t: float(w)
if __name__ == "__main__":
logging.disable(logging.CRITICAL)
for first in ("batteries", "car"):
r = drive(const(900.0), const(7900.0), dur=600, first=first,
socs={"a": 71.0, "b": 100.0})
print(f"scenario 2, {first} first: writes {writes(r)} phases "
f"{writes(r, 'phases')} batteries {r['plant'].batt(599):.0f} W "
f"grid {r['plant'].grid(599):.0f} W")
+10 -1
View File
@@ -300,7 +300,16 @@ configuration:
description: "While the car charges. On: the batteries cover it down to the peak reserve. Off: the peak guard leaves the car out, so the car alone can set the peak."
ev_mode_start:
name: "Car charger · Mode after a restart"
description: "Keep the last mode, or start in Off. A restart never changes the charger's current."
description: "Keep the last mode, or start in Off. In Solar a restart sets the charger to 0 A first, other modes leave its current."
ev_margin_w:
name: "Car charger · Sun kept back (W)"
description: "Solar: this much spare sun is never given to the car."
ev_start_min:
name: "Car charger · Start after (minutes)"
description: "Solar: the car starts after this long with enough spare sun."
ev_pause_min:
name: "Car charger · Pause after (minutes)"
description: "Solar: with too little sun the car holds 6 A this long, then pauses."
auto_start:
name: "Advanced · Start control on boot"
description: "Off by default. Leave it off until the site is commissioned, so someone presses Start after each restart."
+10 -1
View File
@@ -281,7 +281,16 @@ configuration:
description: "Terwijl de auto laadt. Aan: de batterijen dekken ze tot de piekreserve. Uit: de piekbewaking laat de auto buiten beschouwing, dus de auto alleen kan de piek bepalen."
ev_mode_start:
name: "Laadpaal · Modus na een herstart"
description: "De laatste modus houden, of starten in Uit. Een herstart verandert de stroom van de laadpaal nooit."
description: "De laatste modus houden, of starten in Uit. In Zon zet een herstart de laadpaal eerst op 0 A, andere modi laten haar stroom."
ev_margin_w:
name: "Laadpaal · Zon achtergehouden (W)"
description: "Zon: zoveel zonne-overschot krijgt de auto nooit."
ev_start_min:
name: "Laadpaal · Starten na (minuten)"
description: "Zon: de auto start na zo lang genoeg zonne-overschot."
ev_pause_min:
name: "Laadpaal · Pauzeren na (minuten)"
description: "Zon: met te weinig zon houdt de auto zo lang 6 A en pauzeert dan."
auto_start:
name: "Geavanceerd · Regeling starten bij opstarten"
description: "Staat standaard uit. Laat het uit tot de installatie in dienst is, zodat iemand na elke herstart op Start drukt."