glenn schrooyenandClaude e7706150e8 MAINT-28: DECISIONS gives the measured reason for the uncapped give (review M-1); ctl_cycle comment one line + pointer (L-1) ...

Co-Authored-By: Claude <noreply@anthropic.com>

2026-11-13 05:53:55 +01:00

..

static

UX-54: a Forecast tab with the sun, the house and each battery's level, per hour

2026-10-26 19:38:59 +01:00

ui_text

MAINT-25: the Home plan shows no cycle during the 7-day back-off

2026-11-12 09:57:56 +01:00

__init__.py

Packaged as a Home Assistant add-on, with a field guide

2026-08-23 01:15:25 +02:00

allocator.py

SAFETY-84: maintenance charge at N=2 no longer stalls

2026-09-30 19:47:15 +02:00

arbiter.py

SAFETY-91: a held battery is drawn only after the others are full

2026-10-02 14:03:54 +02:00

arbitrage.py

TARIFF-24 round 3: a run planned with a forecast keeps its gap to its end

2026-10-28 17:17:56 +01:00

cheaproll.py

UX-77: Home's roll shares the peak room by room left to full, as control does

2026-11-06 09:11:00 +01:00

circulation.py

UX-10 review: the line as logged gets the red-alarm shape, clamp lines at 30 words, plain HA 400

2026-09-27 12:08:38 +02:00

clamp.py

SAFETY-85 review: grade discharge only, over the plant's settle time

2026-10-01 20:25:41 +02:00

config_page.py

PRICE-01 round 2: the token on no page, fixed-tariff note, token length, F3 words, test gaps

2026-10-14 18:56:51 +02:00

configui.py

PRICE-01 round 2: the token on no page, fixed-tariff note, token length, F3 words, test gaps

2026-10-14 18:56:51 +02:00

control.py

SAFETY-128: control does not act on late Home Assistant readings

2026-11-01 23:45:03 +01:00

ctl_alarms.py

MAINT-21: app/ctl_alarms.py - Controller methods that raise and clear alarms

2026-11-09 00:29:56 +01:00

ctl_cycle.py

MAINT-28: DECISIONS gives the measured reason for the uncapped give (review M-1); ctl_cycle comment one line + pointer (L-1)

2026-11-13 05:53:55 +01:00

ctl_inputs.py

SAFETY-136: a gentler loop on a slow meter until the last move shows

2026-11-09 14:49:26 +01:00

ctl_status.py

MAINT-21: app/ctl_status.py - Controller methods that build the status and MQTT output

2026-11-09 00:30:00 +01:00

ctl_tasks.py

MAINT-21 round 2: keep the move pure - revert the added DECISIONS text, restore cut comments

2026-11-09 05:48:00 +01:00

ctl_trade.py

MAINT-24: a started maintenance charge gets the cheap night

2026-11-12 07:07:44 +01:00

ctl_writes.py

MAINT-21: comments only - trim restated notes, add DECISIONS pointers

2026-11-09 00:41:34 +01:00

custom_formula.py

MAINT-20 part 1 review: restore three lost lines, rewrap ragged comments

2026-11-01 03:02:51 +01:00

daycurve.py

UX-54 round 6: the floor cut in one step, never from an empty battery

2026-10-27 19:03:56 +01:00

dayplan.py

OPT-36 round 4: count only charge control will make; Solar first drain at the night base

2026-11-02 12:56:17 +01:00

dayview.py

UX-77: Home draws today's grid charge for the hours control will really charge

2026-11-05 21:48:56 +01:00

delivery.py

SAFETY-43 round 2: the cut-out "positive control" was vacuous, and the record

2026-09-08 04:15:07 +02:00

drivers.py

SMA-10 round 2: a failed release sends 0 W once, retries at heartbeat pace

2026-11-07 20:17:01 +01:00

freeze.py

UX-10: the last plain-language leftovers: log lines, two table rows, 'Why: Other', red at 0 s

2026-09-27 10:58:43 +02:00

freshness.py

SAFETY-94: a healthy battery that lags or reverses is not flagged as frozen or refusing

2026-10-04 00:15:42 +02:00

haentities.py

UX-13 P4: the setup wizard for installers

2026-09-28 05:31:18 +02:00

handback.py

SMA-10 round 2: a failed release sends 0 W once, retries at heartbeat pace

2026-11-07 20:17:01 +01:00

hass.py

SAFETY-112: say plainly that control waits for Home Assistant to start

2026-10-13 01:07:51 +02:00

homeview.py

MAINT-25: the Home plan shows no cycle during the 7-day back-off

2026-11-12 09:57:56 +01:00

idle.py

SAFETY-97: centre the band on the idle reading clamped to 75 W

2026-10-04 16:57:16 +02:00

inverter.py

SMA-10 round 2: a failed release sends 0 W once, retries at heartbeat pace

2026-11-07 20:17:01 +01:00

lateness.py

SAFETY-129 round 3: the real reason for the 16 s limit, a slow-start check, the row's tail

2026-11-07 00:12:33 +01:00

main.py

MAINT-28: during a real peak the maintenance charge stays paused until the house is clear of the aim

2026-11-12 21:51:56 +01:00

maintenance.py

MAINT-15: the balancing hold ends on time with no SoC reading

2026-10-09 23:56:29 +02:00

messages.py

SMA-10 round 2: a failed release sends 0 W once, retries at heartbeat pace

2026-11-07 20:17:01 +01:00

modetrade.py

MAINT-24: keep the refusal probe beside a maintenance charge

2026-11-12 07:33:04 +01:00

mqtt.py

DOC-8: HA manufacturer says EMS port; rebuild field guide PDF

2026-10-17 01:53:33 +02:00

p1.py

Merge release/1.0 (e3e4ba6) into opt15-price-run-fixes

2026-10-13 12:15:44 +02:00

packmode.py

OPT-11 P4 review: Cheap hours ignores the plan; midnight-stale forecast; stricter ids

2026-09-29 22:08:47 +02:00

packshare.py

SAFETY-43: delinquency measured against the ask, not against a flat 500 W

2026-09-08 03:14:16 +02:00

peakguard.py

MAINT-28: keep the single shaping_suspended(.., maint_aim) call site (test_peak_margin pin); shaping_held takes its answer

2026-11-12 23:58:19 +01:00

price_chain.py

MAINT-20 part 1: price_chain.py comments trimmed

2026-11-01 01:19:29 +01:00

price_forecast.py

MAINT-20 part 1 review: restore three lost lines, rewrap ragged comments

2026-11-01 03:02:51 +01:00

price_history.py

MAINT-20 part 1 review: restore three lost lines, rewrap ragged comments

2026-11-01 03:02:51 +01:00

price.py

MAINT-20 part 1 review: restore three lost lines, rewrap ragged comments

2026-11-01 03:02:51 +01:00

priceruns.py

OPT-11 P3: price runs per battery

2026-09-29 02:37:44 +02:00

pv.py

SAFETY-118: a missing peak forecast reading keeps the unit-fault state

2026-10-16 18:19:44 +02:00

rows.py

MAINT-21 round 2: keep the move pure - revert the added DECISIONS text, restore cut comments

2026-11-09 05:48:00 +01:00

selfconfig.py

SMA-2: each inverter is reached through a driver; GoodWe behaviour unchanged

2026-11-07 11:28:47 +01:00

settle.py

SAFETY-136 round 2: tests for override and direction, true wording

2026-11-09 20:51:06 +01:00

setuponly.py

UX-46: Dutch status rows, banners, notes and wizard lines on the NL pages

2026-10-22 03:21:41 +02:00

shadow.py

UX-08 2d: plain log lines, the rest of the status page, and DOCS

2026-09-27 08:01:16 +02:00

solarfc.py

OPT-38 round 2: a kept tomorrow reading is flagged kept only from 20:00

2026-11-07 06:02:00 +01:00

static_tariff.py

UX-53: Home draws a grid charge only where the add-on will take it

2026-10-26 11:15:29 +01:00

store.py

MAINT-13: a full pack that stops at 98-99 % is not a failed charge

2026-10-08 09:36:06 +02:00

tariff.py

Merge release/1.0 (e3e4ba6) into opt15-price-run-fixes

2026-10-13 12:15:44 +02:00

uilayout.py

SMA-2 round 2: keep the driver keys out of the schema, translations and labels

2026-11-07 13:09:31 +01:00

uimodel.py

UX-13 P5: Dutch text, STYLE check, DOCS screenshots, period editor

2026-09-28 16:33:32 +02:00

uipage.py

UX-46: Dutch status rows, banners, notes and wizard lines on the NL pages

2026-10-22 03:21:41 +02:00

uitext.py

SMA-10: two idle states, hold 0 W or hand the inverter back

2026-11-07 18:21:28 +01:00

validate.py

SMA-2 round 2: keep the driver keys out of the schema, translations and labels

2026-11-07 13:09:31 +01:00

watchdog.py

UX-11: safety log lines give one plain sentence and the code, the figures go to DEBUG

2026-09-27 13:34:30 +02:00

web.py

SMA-10: two idle states, hold 0 W or hand the inverter back

2026-11-07 18:21:28 +01:00