Compare commits
| Author | SHA1 | Date | |
|---|---|---|---|
|
|
7788543e09 | ||
|
|
6d7046fc45 | ||
|
|
07f703d1bc | ||
|
|
2cfbc4aec8 |
@@ -1,5 +1,9 @@
|
||||
# Changelog
|
||||
|
||||
### Not in a release yet
|
||||
|
||||
- When the add-on changes the car's phases while the batteries are at the peak reserve, there is no longer a false "Battery stopped limiting the peak" for a moment ([[EV-15]]).
|
||||
|
||||
## 0.24.0
|
||||
|
||||
**A minor bump: the add-on can now charge the car (Manual mode), and a car that alone takes the batteries to the peak reserve no longer raises a false peak alarm. Two new options were added, both with defaults, and none needs setting.**
|
||||
|
||||
@@ -120,6 +120,23 @@ up to 1.8 kW; the 40 Wh floor fixes that.)
|
||||
the gaps seen on the rig, 150 to 250 s at 50 s sampling, and shorter than a
|
||||
quarter) and a gap does not restart the 10 s
|
||||
on-count. `car_explains`, which the alarms read, has no hold.
|
||||
- **Our own phase change is not a reason to alarm** (EV-15). Rig, twice: at the
|
||||
reserve, with the car covering, the add-on's 3 -> 1 switch set the car to 0 A.
|
||||
A car that is not charging has no corroboration (`CarTracker._corr_note` clears
|
||||
the window, `corroborated` is False), so `car_alarm_w()` was None, the car
|
||||
explained nothing and `_car_need_excl` latched for the quarter: one
|
||||
PEAK_GUARD_FLOOR_LIMITED and one `goodwe_peak_soc_floor`. Now, only for grading
|
||||
(`car_cycle`), `ctl_car._car_own_pause` lets the car's fresh, not stuck figure
|
||||
(`CarTracker.car_w_paused`, 0 W while paused) stand in without corroboration:
|
||||
from the moment our 0 A write is SENT (`zero_sent_at`: the cycle runs beside
|
||||
the writer and the car stops before the write returns), until the current is
|
||||
set again, at most
|
||||
`OWN_PAUSE_MAX_S` (85 s, the sequence's own waits), then at most one
|
||||
corroboration window (60 s). It ends at once on Off, Stop, shadow, unplug,
|
||||
another writer, or a refused select or write (`seq["failed"]`). The energy it
|
||||
drew in the pause is kept apart (`ws_p`), so `car_exclude`, the guard's
|
||||
input, the claim, floor and writes are unchanged. A house overload still fails
|
||||
the test without the car, so it alarms as on Off.
|
||||
- **Our own write is ours until its mute ends** (EV-12). The mute of the tracker's
|
||||
own detector opens before the write and runs 15 s from when it returns, because
|
||||
the read-back reaches the cycle while the write still waits for it.
|
||||
|
||||
@@ -125,6 +125,8 @@ class ManualWriter:
|
||||
self.phase_fails = 0 # phase selects the charger did not take
|
||||
self.phases_gave_up = False
|
||||
self.undone = 0 # sequences undone before the select
|
||||
self.phase_done_at = None # EV-15: our phase change ended well then
|
||||
self.zero_sent_at = None # EV-15: our 0 A write is out, not yet back
|
||||
|
||||
# ------------------------------------------------------------------ user
|
||||
def user_changed(self) -> None:
|
||||
@@ -292,7 +294,14 @@ class ManualWriter:
|
||||
async def _begin(self, drv, r, cur, n, now, tracker) -> None:
|
||||
"""Step 1 of the safe sequence: 0 A. A charger that does not take it
|
||||
stops the sequence before the phases are touched."""
|
||||
ok = await self._write(drv, 0.0, cur, now, tracker)
|
||||
self.phase_done_at = None
|
||||
# EV-15: the car stops while the write waits for its read-back, and the
|
||||
# cycle runs beside it: the window opens when the write is SENT.
|
||||
self.zero_sent_at = now
|
||||
try:
|
||||
ok = await self._write(drv, 0.0, cur, now, tracker)
|
||||
finally:
|
||||
self.zero_sent_at = None
|
||||
if not ok:
|
||||
self._failed(now)
|
||||
return
|
||||
@@ -336,6 +345,7 @@ class ManualWriter:
|
||||
self.log.append(("phases", q["n"], now, ok))
|
||||
q["stage"], q["t1"] = "settle", self.last_done # from its return
|
||||
if not ok:
|
||||
q["failed"] = True # EV-15: no grace for the alarm
|
||||
# The charger did not take it: the car gets its current back
|
||||
# on the old phases after the same SETTLE_S as a taken select
|
||||
# (HA may have taken it and only the read-back be late), and
|
||||
@@ -356,7 +366,10 @@ class ManualWriter:
|
||||
# still wanted, and one that is in place is adopted.
|
||||
self.seq, self.rev_applied, self.reapply = None, None, False
|
||||
self.fails, self.blocked = 0, False
|
||||
if not q.get("failed"):
|
||||
self.phase_done_at = self.last_done # EV-15
|
||||
return
|
||||
q["failed"] = True # EV-15: a refused write ends it
|
||||
q["tries"] += 1
|
||||
if q["tries"] >= MAX_TRIES:
|
||||
# Left at 0 A is the safe side; the next reading re-applies.
|
||||
|
||||
@@ -800,8 +800,20 @@ class CarTracker:
|
||||
EV-03 rules), not stuck after a write, corroborated by the energy meter
|
||||
(`corroborated`), and never above what the read-back allows the car to
|
||||
draw: an old or frozen figure must not hide a house overload."""
|
||||
return self._capped_w(now, True)
|
||||
|
||||
def car_w_paused(self, now: float):
|
||||
"""EV-15: the same figure as `car_w_trusted` without the energy-meter
|
||||
corroboration, which a car held at 0 A by the add-on's own phase change
|
||||
cannot give (the meter's window restarts when it stops charging). Fresh,
|
||||
not stuck, and capped by the read-back. Only for grading the alarm
|
||||
during that sequence (`ctl_car._car_own_pause`)."""
|
||||
return self._capped_w(now, False)
|
||||
|
||||
def _capped_w(self, now: float, corroborate: bool):
|
||||
w = self.car_w(now)
|
||||
if w is None or self.stuck(now) or not self.corroborated(now):
|
||||
if w is None or self.stuck(now) \
|
||||
or (corroborate and not self.corroborated(now)):
|
||||
return None
|
||||
r = self.reading
|
||||
a = r.allowed_a if r.allowed_a is not None else r.setpoint_a
|
||||
|
||||
@@ -24,6 +24,13 @@ OVER_HOLD_S = peakguard.ALARM_HOLD_S
|
||||
# the cause: longer than the gaps seen on the rig (150 to 250 s at 50 s
|
||||
# sampling) and shorter than a quarter, or until the session really ends.
|
||||
OVER_OFF_HOLD_S = 180.0
|
||||
# EV-15: the longest our own phase change can take (0 A wait, settle, three
|
||||
# tries of a write at 5 s apart and up to 10 s each, the select's own wait);
|
||||
# the grace for the alarm never outlasts it, and after the current is set
|
||||
# again it lasts at most one corroboration window.
|
||||
OWN_PAUSE_MAX_S = (carmode.ZERO_WAIT_S + carmode.SETTLE_S
|
||||
+ carmode.MAX_TRIES * 15.0 + 10.0)
|
||||
OWN_PAUSE_TAIL_S = chargers.CORR_WINDOW_S
|
||||
|
||||
|
||||
class CarMixin:
|
||||
@@ -57,7 +64,7 @@ class CarMixin:
|
||||
self._car_over_notified = None # the session a notice was raised for
|
||||
self._car_session = 0
|
||||
self._car_prev_state = None
|
||||
self._carq = {"key": None, "ws": 0.0, "mono": None}
|
||||
self._carq = {"key": None, "ws": 0.0, "ws_p": 0.0, "mono": None}
|
||||
self._peak_proj_real = None
|
||||
saved = data.get(CAR_PEAK_KEY)
|
||||
self.car_peak_q = dict(saved) if isinstance(saved, dict) else {}
|
||||
@@ -206,17 +213,45 @@ class CarMixin:
|
||||
return None
|
||||
return self.car.car_w_trusted(self.car_now())
|
||||
|
||||
def _car_quarter(self, proj, w, mono) -> None:
|
||||
def _car_own_pause(self, mono) -> bool:
|
||||
"""EV-15: is the car held at 0 A by the add-on's OWN phase change? From
|
||||
the moment its 0 A write is SENT (the cycle runs beside the write)
|
||||
until the current is set again, then at most one corroboration window.
|
||||
No when it was aborted (Off, Stop, shadow, unplug, another writer), a
|
||||
write was refused, or it ran past its own maximum."""
|
||||
wr = getattr(self, "car_writer", None)
|
||||
if wr is None or (wr.seq is None and wr.phase_done_at is None
|
||||
and wr.zero_sent_at is None) or wr.hold:
|
||||
return False
|
||||
r = self.car.reading
|
||||
if not (self.car_manual() and self.car_writing()
|
||||
and r is not None and r.available and r.state != "A"):
|
||||
return False
|
||||
q = wr.seq
|
||||
if q is None and wr.zero_sent_at is not None: # sent, not yet back
|
||||
return 0.0 <= mono - wr.zero_sent_at <= OWN_PAUSE_MAX_S
|
||||
if q is not None:
|
||||
return not q.get("failed") and 0.0 <= mono - q["t0"] \
|
||||
<= OWN_PAUSE_MAX_S
|
||||
return 0.0 <= mono - wr.phase_done_at <= OWN_PAUSE_TAIL_S
|
||||
|
||||
def _car_quarter(self, proj, w, mono, wg=None) -> None:
|
||||
"""The car's energy in the open quarter, for the average the guard's
|
||||
house leaves out and for the peak line."""
|
||||
house leaves out and for the peak line. `wg` (EV-15) is the figure for
|
||||
grading during our own pause; its energy is kept apart (`ws_p`) so the
|
||||
guard's input is unchanged."""
|
||||
q = self._carq
|
||||
key = None if proj is None else proj.block_start
|
||||
last = q["mono"]
|
||||
if key != q["key"]:
|
||||
self._car_bank(q)
|
||||
q["key"], q["ws"] = key, 0.0
|
||||
if key is not None and w is not None and last is not None:
|
||||
q["ws"] += float(w) * min(max(mono - last, 0.0), 5.0)
|
||||
q["key"], q["ws"], q["ws_p"] = key, 0.0, 0.0
|
||||
if key is not None and last is not None:
|
||||
dt = min(max(mono - last, 0.0), 5.0)
|
||||
if w is not None:
|
||||
q["ws"] += float(w) * dt
|
||||
elif wg is not None:
|
||||
q["ws_p"] = q.get("ws_p", 0.0) + float(wg) * dt
|
||||
q["mono"] = mono
|
||||
|
||||
def _car_bank(self, q) -> None:
|
||||
@@ -233,14 +268,17 @@ class CarMixin:
|
||||
del self.car_peak_q[k]
|
||||
self.store.set(CAR_PEAK_KEY, dict(self.car_peak_q))
|
||||
|
||||
def car_avg_w(self, proj, w) -> float:
|
||||
def car_avg_w(self, proj, w, graded=False) -> float:
|
||||
"""The car's average over the whole open quarter: what it drew so far
|
||||
and `w` for the rest."""
|
||||
and `w` for the rest. `graded` (EV-15) adds what it drew during our
|
||||
own pause."""
|
||||
if proj is None or w is None:
|
||||
return 0.0
|
||||
left = max(0.0, QUARTER_S - float(proj.elapsed_s))
|
||||
so_far = self._carq["ws"] if self._carq["key"] == proj.block_start \
|
||||
else 0.0
|
||||
if graded and self._carq["key"] == proj.block_start:
|
||||
so_far += self._carq.get("ws_p", 0.0)
|
||||
return (so_far + float(w) * left) / QUARTER_S
|
||||
|
||||
def car_exclude(self, proj, w):
|
||||
@@ -264,7 +302,7 @@ class CarMixin:
|
||||
the car asked for. Unchanged without a fresh car reading."""
|
||||
if proj is None or w is None or proj.block_start is None:
|
||||
return proj
|
||||
avg = self.car_avg_w(proj, w)
|
||||
avg = self.car_avg_w(proj, w, graded=True)
|
||||
left = max(0.0, QUARTER_S - float(proj.elapsed_s))
|
||||
held = float(proj.held_w)
|
||||
done_ws = QUARTER_S * float(proj.projected_w) - max(held, 0.0) * left
|
||||
@@ -280,13 +318,19 @@ class CarMixin:
|
||||
`real_proj` is the projection WITH the car, whatever the guard saw."""
|
||||
mono = self.car_now()
|
||||
w = self.car_alarm_w()
|
||||
self._car_quarter(real_proj, w, mono)
|
||||
# EV-15: the figure for grading only. Our own phase change holds the
|
||||
# car at 0 A and the energy meter cannot corroborate it then, so for
|
||||
# that bounded time its fresh, not stuck figure stands in.
|
||||
wg = w
|
||||
if w is None and self._car_own_pause(mono):
|
||||
wg = self.car.car_w_paused(mono)
|
||||
self._car_quarter(real_proj, w, mono, wg)
|
||||
self._car_session_tick(mono)
|
||||
explains = over = False
|
||||
if real_proj is not None and target_w is not None \
|
||||
and real_proj.block_start is not None:
|
||||
# EV-10: every cycle, so the latches do not depend on the option.
|
||||
graded = self._car_explains_alarm(real_proj, guard, target_w, w)
|
||||
graded = self._car_explains_alarm(real_proj, guard, target_w, wg)
|
||||
if self.car_cover:
|
||||
explains = over = graded
|
||||
elif w is not None:
|
||||
|
||||
@@ -0,0 +1,344 @@
|
||||
"""EV-15: the add-on's own phase change at the peak reserve raises no alarm.
|
||||
`python3 -B test_ev15.py`
|
||||
|
||||
The rig (EV-10 and EV-10b, F-2): cover on, the batteries at the reserve, the car
|
||||
charging and explaining the excess. The add-on's own 3 -> 1 phase switch sets
|
||||
the car to 0 A; with the car not charging its figure is no longer corroborated
|
||||
(`CarTracker.corroborated`), so `car_alarm_w()` is None, nothing is explained,
|
||||
and PEAK_GUARD_FLOOR_LIMITED plus `goodwe_peak_soc_floor` fire. The rule: for
|
||||
the add-on's own sequence only (`ctl_car._car_own_pause`, bounded) the car's
|
||||
fresh, not stuck figure stands in for grading.
|
||||
|
||||
1. The rig shapes end to end through the car cycle: 3 -> 1 and 1 -> 3.
|
||||
2. A house overload that starts during the sequence still alarms, as on Off.
|
||||
3. Aborted (Off, Stop, unplug), refused, an outside writer: no grace.
|
||||
4. The bounds, and the figure that stands in (stale, stuck: nothing).
|
||||
Mutating a module this file grades? Read MUTATION.md first (purge __pycache__).
|
||||
"""
|
||||
|
||||
import asyncio
|
||||
import logging
|
||||
import os
|
||||
import sys
|
||||
|
||||
HERE = os.path.dirname(os.path.abspath(__file__))
|
||||
sys.path.insert(0, os.path.join(HERE, "tools"))
|
||||
|
||||
from app import ctl_car, carmode, chargers as CH # noqa: E402
|
||||
import ev04_peak as P # noqa: E402
|
||||
import safety81_sim as s81 # noqa: E402
|
||||
|
||||
logging.disable(logging.CRITICAL)
|
||||
fails = []
|
||||
|
||||
|
||||
def check(name, cond):
|
||||
print(f" {'ok ' if cond else 'FAIL'} {name}")
|
||||
if not cond:
|
||||
fails.append(name)
|
||||
|
||||
|
||||
def at(t, fn):
|
||||
return {"t": t, "fn": fn}
|
||||
|
||||
|
||||
def beside(plant, c):
|
||||
"""The writer runs BESIDE the cycle, as in production (`car_kick`): its 1 s
|
||||
poll for the read-back lands after the cycle's own read, and the cycle does
|
||||
not wait for the writer (`ev04_peak.drive` does)."""
|
||||
gate = asyncio.Event()
|
||||
|
||||
async def sleep(_s):
|
||||
gate.clear()
|
||||
await gate.wait()
|
||||
|
||||
async def settle():
|
||||
gate.set()
|
||||
for _ in range(5):
|
||||
await asyncio.sleep(0)
|
||||
c.charger._sleep = sleep
|
||||
c.car_settle = settle
|
||||
|
||||
|
||||
def run(house, cap, t_res, t_sw, new, *, extra=None, mode="manual",
|
||||
sim_fn=None, dur=895, plug=True, side=False):
|
||||
"""Reserve at `t_res`, our phase change to `new` at `t_sw`. Returns the
|
||||
run, a per-second trace (second, own-pause, explains, red rows) and the
|
||||
alarms."""
|
||||
tr = []
|
||||
|
||||
def note(plant, c):
|
||||
red = [x["id"] for x in c.checks()
|
||||
if x["ok"] is False and not x["warn"]] \
|
||||
if t_sw - 5 <= plant.t <= t_sw + 90 else []
|
||||
g = c.peak_guard
|
||||
lim = bool(g is not None and (g.floor_limited or g.saturated))
|
||||
tr.append((plant.t, getattr(c, "_car_own_pause", lambda _t: False)(c.car_now()), c.car_explains,
|
||||
red, plant.ch.power_w, plant.ch.state, lim))
|
||||
|
||||
def reserve(plant, c):
|
||||
plant.soc = 19.0
|
||||
plant.load = lambda t: house + plant.ch.power_w
|
||||
|
||||
def switch(plant, c):
|
||||
asyncio.get_event_loop().create_task(
|
||||
c.handle_action("car_phases", value=new))
|
||||
|
||||
ev = {t: note for t in range(0, dur)}
|
||||
ev[t_res] = lambda p, c: (reserve(p, c), note(p, c))
|
||||
ev[t_sw] = lambda p, c: (switch(p, c), note(p, c))
|
||||
if side:
|
||||
ev[t_sw - 2] = lambda p, c: (beside(p, c), note(p, c))
|
||||
for t, fn in (extra or {}).items():
|
||||
prev = ev.get(t, note)
|
||||
ev[t] = (lambda p, c, prev=prev, fn=fn: (fn(p, c), prev(p, c)))
|
||||
sim = None
|
||||
if sim_fn is not None or side:
|
||||
from chargersim import SimCharger
|
||||
sim = SimCharger(setpoint_a=16)
|
||||
sim_fn = sim_fn or (lambda s: None)
|
||||
sim_fn(sim)
|
||||
r = P.drive(s81.constant(house), dur=dur, rating=12000.0, soc=60.0,
|
||||
cap=cap, phases=(3 if new == 1 else 1), user_a=16, setpoint=16,
|
||||
mode=mode, events=ev, sim=sim, plug=plug)
|
||||
return r, tr, P.ids(r, *P.ALARMS)
|
||||
|
||||
|
||||
def reds(tr):
|
||||
return [x for x in tr if x[3]]
|
||||
|
||||
|
||||
# =========================================================================== #
|
||||
print("1. THE RIG SHAPES THROUGH THE CAR CYCLE")
|
||||
# =========================================================================== #
|
||||
SHAPES = (
|
||||
("EV-10 shape: house 3 kW, car 11 kW, aim 6 kW, 3 -> 1",
|
||||
3000.0, 6050.0, 300, 600, 1),
|
||||
("EV-10b shape: a 9411 W limit, 3 -> 1", 2000.0, 9461.0, 300, 600, 1),
|
||||
("1 -> 3 (the car 3.7 kW, then 11 kW), aim 5 kW", 2500.0, 5050.0,
|
||||
100, 600, 3),
|
||||
)
|
||||
for name, house, cap, t_res, t_sw, new in SHAPES:
|
||||
r, tr, al = run(house, cap, t_res, t_sw, new)
|
||||
c, sim = r["c"], r["sim"]
|
||||
sw = [x for x in sim.writes() if x[1] == "phases"]
|
||||
check(f"{name}: the car at the reserve covers, and the add-on's own "
|
||||
f"sequence ran (0 A, select, the current back)",
|
||||
len(sw) == 1 and [x[2] for x in sim.writes("current")][-2:]
|
||||
== [0.0, 16.0] and sim.phases_allowed == new)
|
||||
pause = [x for x in tr if x[1]]
|
||||
check(f"{name}: the own-pause grace was on during it, and ended",
|
||||
len(pause) >= 10 and not any(x[1] for x in tr[-1:])
|
||||
and (pause[-1][0] - pause[0][0])
|
||||
<= getattr(ctl_car, "OWN_PAUSE_MAX_S", 0)
|
||||
+ getattr(ctl_car, "OWN_PAUSE_TAIL_S", 0))
|
||||
check(f"{name}: no PEAK_GUARD_FLOOR_LIMITED / saturated, no "
|
||||
f"goodwe_peak_soc_floor notification", al == [])
|
||||
check(f"{name}: no red row in any sample around the switch",
|
||||
reds(tr) == [])
|
||||
limited = [x for x in tr if x[1] and x[6]]
|
||||
check(f"{name}: in every cycle of the sequence in which the guard is "
|
||||
f"limited (the cycle of the rig's alarm among them) the car "
|
||||
f"explains it", len(limited) >= 1 and all(x[2] for x in limited)
|
||||
and any(x[2] for x in tr if x[0] == t_sw + 1))
|
||||
check(f"{name}: and in every limited cycle after it, to the quarter's end",
|
||||
all(x[2] for x in tr if x[0] >= t_sw and x[6]))
|
||||
|
||||
# =========================================================================== #
|
||||
print("\n2. A HOUSE OVERLOAD DURING THE SEQUENCE STILL ALARMS")
|
||||
# =========================================================================== #
|
||||
def overload(plant, c):
|
||||
plant.load = lambda t: 25000.0 + plant.ch.power_w
|
||||
|
||||
|
||||
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, extra={606: overload})
|
||||
ro, tro, alo = run(3000.0, 6050.0, 300, 600, 1, extra={606: overload},
|
||||
mode="off", plug=False)
|
||||
rn, trn, aln = run(3000.0, 6050.0, 300, 900, 1, extra={606: overload})
|
||||
check("PRECONDITION: on Off (no car) the same load alarms, and in Manual "
|
||||
"with no phase change", alo != [] and aln != [])
|
||||
check("a 25 kW house overload that starts 6 s into the sequence (the car "
|
||||
"paused): the alarm fires", al != [])
|
||||
print(f" alarm seconds: in the sequence {[t for t, _ in al]}, Off without "
|
||||
f"the car {[t for t, _ in alo]}, Manual with no phase change "
|
||||
f"{[t for t, _ in aln]}")
|
||||
check("...at the same second as on Off and as in Manual with no phase change",
|
||||
bool(al) and bool(alo) and bool(aln)
|
||||
and al[0][0] == alo[0][0] == aln[0][0])
|
||||
check("...and the car does not explain it (during the sequence too)",
|
||||
not any(x[2] for x in tr if 640 <= x[0] <= 660))
|
||||
|
||||
# =========================================================================== #
|
||||
print("\n3. ABORTED, REFUSED, OUTSIDE: NO GRACE AFTER IT")
|
||||
# =========================================================================== #
|
||||
def hit(res, t0, secs):
|
||||
return [x for x in res if t0 <= x[0] <= t0 + secs and x[1]]
|
||||
|
||||
|
||||
def off_now(plant, c):
|
||||
asyncio.get_event_loop().create_task(c.handle_action("car_mode",
|
||||
value="off"))
|
||||
|
||||
|
||||
def stop_now(plant, c):
|
||||
c.auto = False
|
||||
|
||||
|
||||
def unplug(plant, c):
|
||||
plant.ch.unplug()
|
||||
|
||||
|
||||
slow = lambda s: setattr(s, "stop_delay_s", 8.0) # noqa: E731
|
||||
for what, fn in (("Off", off_now), ("Stop", stop_now), ("unplug", unplug)):
|
||||
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, extra={602: fn},
|
||||
sim_fn=slow)
|
||||
check(f"{what} 2 s into the sequence: the grace is off from the next "
|
||||
f"cycle on", not hit(tr, 604, 200)
|
||||
and any(x[1] for x in tr if 600 <= x[0] <= 602))
|
||||
|
||||
def refuse_phases(sim):
|
||||
sim.request_phases = lambda n: False
|
||||
|
||||
|
||||
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, sim_fn=refuse_phases)
|
||||
check("the select is refused: the grace ends at once (no cycle of it after "
|
||||
"the refusal), the current comes back",
|
||||
len([x for x in r["sim"].writes("current")]) >= 2
|
||||
and not hit(tr, 606, 200))
|
||||
|
||||
def outside_zero(plant, c):
|
||||
plant.ch.set_current(0.0)
|
||||
|
||||
|
||||
r2, tr2, al2 = run(3000.0, 6050.0, 300, 900, 1, extra={602: outside_zero})
|
||||
check("an outside writer's 0 A: no grace, and the normal grading (no car "
|
||||
"power: nothing explained) raises the alarm as before",
|
||||
not any(x[1] for x in tr2) and not any(x[2] for x in tr2
|
||||
if 610 <= x[0] <= 700)
|
||||
and al2 != [])
|
||||
|
||||
# =========================================================================== #
|
||||
print("\n4. THE BOUNDS AND THE FIGURE THAT STANDS IN")
|
||||
# =========================================================================== #
|
||||
class _C(ctl_car.CarMixin):
|
||||
"""The mixin with just what `_car_own_pause` reads."""
|
||||
def __init__(self):
|
||||
self.o = {}
|
||||
self.car_init({}, type("S", (), {"data": {}, "set": lambda s, k, v: 0})())
|
||||
self.car_mode = carmode.MANUAL
|
||||
self.auto, self.shadow = True, False
|
||||
self.inverters, self.site_sign_wd = [], type("W", (), {"tripped": False})()
|
||||
self.circ_wd = type("W", (), {"tripped": False})()
|
||||
self.charger = type("H", (), {"configured": lambda s: True})()
|
||||
self.car = CH.CarTracker()
|
||||
self.car.reading = CH.ChargerReading(available=True, state="B")
|
||||
|
||||
|
||||
c = _C()
|
||||
c.car_writer.seq = {"stage": "settle", "t0": 100.0, "n": 1, "tries": 0,
|
||||
"prev": 16.0}
|
||||
M = ctl_car.OWN_PAUSE_MAX_S
|
||||
check("bound: the sequence's own maximum is its waits (0 A wait, settle, "
|
||||
"three tries at 15 s, the select) and no more",
|
||||
M == carmode.ZERO_WAIT_S + carmode.SETTLE_S + carmode.MAX_TRIES * 15.0
|
||||
+ 10.0 and ctl_car.OWN_PAUSE_TAIL_S == CH.CORR_WINDOW_S)
|
||||
check("bound: on at the 0 A write and up to the maximum",
|
||||
c._car_own_pause(100.0) and c._car_own_pause(100.0 + M))
|
||||
check("bound: off one second past it", not c._car_own_pause(101.0 + M))
|
||||
c.car_writer.seq = None
|
||||
c.car_writer.phase_done_at = 200.0
|
||||
T = ctl_car.OWN_PAUSE_TAIL_S
|
||||
check("bound: after the current is set again it lasts one corroboration "
|
||||
"window", c._car_own_pause(200.0 + T) and not c._car_own_pause(201.0 + T))
|
||||
c.car_writer.phase_done_at = None
|
||||
check("no sequence and none just done: no grace", not c._car_own_pause(100.0))
|
||||
c.car_writer.seq = {"stage": "settle", "t0": 100.0, "failed": True}
|
||||
check("a refused write marks the sequence: no grace", not c._car_own_pause(110.0))
|
||||
c.car_writer.seq = {"stage": "settle", "t0": 100.0}
|
||||
c.car_mode = carmode.OFF
|
||||
check("Off: no grace", not c._car_own_pause(110.0))
|
||||
c.car_mode, c.shadow = carmode.MANUAL, True
|
||||
check("shadow mode: no grace", not c._car_own_pause(110.0))
|
||||
c.shadow, c.auto = False, False
|
||||
check("control stopped: no grace", not c._car_own_pause(110.0))
|
||||
c.auto = True
|
||||
c.car_writer.hold = True
|
||||
check("another writer (hold): no grace", not c._car_own_pause(110.0))
|
||||
c.car_writer.hold = False
|
||||
c.car_writer.seq, c.car_writer.zero_sent_at = None, 100.0
|
||||
check("0 A sent, not yet back: grace from the send, to the maximum, no more",
|
||||
c._car_own_pause(100.0) and c._car_own_pause(100.0 + M)
|
||||
and not c._car_own_pause(101.0 + M))
|
||||
c.car_writer.zero_sent_at = None
|
||||
c.car_writer.phase_done_at = 200.0
|
||||
c.car_writer.hold = True
|
||||
check("another writer in the 60 s after the current is set: no grace",
|
||||
not c._car_own_pause(210.0))
|
||||
c.car_writer.hold, c.car_writer.phase_done_at = False, None
|
||||
c.car_writer.seq = {"stage": "settle", "t0": 100.0}
|
||||
c.car.reading = CH.ChargerReading(available=True, state="A")
|
||||
check("unplugged: no grace", not c._car_own_pause(110.0))
|
||||
c.car.reading = CH.ChargerReading(available=True, state="B")
|
||||
check("PRECONDITION: the same state is on", c._car_own_pause(110.0))
|
||||
|
||||
tk = CH.CarTracker()
|
||||
tk.reading = CH.ChargerReading(available=True, state="B", power_w=500.0,
|
||||
allowed_a=16.0, phases_allowed=1)
|
||||
tk.last_ok = 0.0
|
||||
check("the stand-in figure is the fresh reading, capped by the read-back",
|
||||
tk.car_w_paused(5.0) == 500.0 and tk.car_w_trusted(5.0) is None)
|
||||
check("a stale reading stands in for nothing", tk.car_w_paused(100.0) is None)
|
||||
tk.stuck_now = True
|
||||
check("a stuck reading stands in for nothing", tk.car_w_paused(5.0) is None)
|
||||
|
||||
# =========================================================================== #
|
||||
print("\n5. THE WRITER RUNS BESIDE THE CYCLE (review F-1)")
|
||||
# =========================================================================== #
|
||||
# The car stops (state B) in the same Home Assistant update as the 0 A
|
||||
# read-back; the write has not returned yet, so no sequence exists. The window
|
||||
# opens when the write is SENT (`ManualWriter.zero_sent_at`).
|
||||
def lagged(lag, delay):
|
||||
def f(s):
|
||||
s.lag_s, s.stop_delay_s = lag, delay
|
||||
return f
|
||||
|
||||
|
||||
for lag, delay in ((2, 0), (0, 0), (2, 3), (5, 2)):
|
||||
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, side=True,
|
||||
sim_fn=lagged(lag, delay))
|
||||
nm = f"beside the cycle, lag {lag} s, stop delay {delay} s"
|
||||
limited = [x for x in tr if x[0] >= 600 and x[6]]
|
||||
check(f"{nm}: our sequence ran (select once, then 16 A again)",
|
||||
len([x for x in r["sim"].writes("phases")]) == 1
|
||||
and r["sim"].phases_allowed == 1
|
||||
and [x[2] for x in r["sim"].writes("current")][-2:] == [0.0, 16.0])
|
||||
check(f"{nm}: no PEAK_GUARD_FLOOR_LIMITED, no goodwe_peak_soc_floor",
|
||||
al == [])
|
||||
check(f"{nm}: no red row, and the car explains every limited cycle",
|
||||
reds(tr) == [] and all(x[2] for x in limited))
|
||||
|
||||
|
||||
def not_taken(plant, c):
|
||||
plant.ch.refuse = "ignore" # HA accepts, the charger does nothing
|
||||
|
||||
|
||||
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, side=True,
|
||||
sim_fn=lagged(0, 0), extra={600: not_taken})
|
||||
check("the 0 A write is not taken (read-back never follows): the window was "
|
||||
"open while it waited", any(x[1] for x in tr if 600 <= x[0] <= 606))
|
||||
own = [x[0] for x in tr if x[1]]
|
||||
runs = 1 + len([1 for a, b in zip(own, own[1:]) if b - a > 1])
|
||||
check("...and no grace after the refusal (the retry, RETRY_S later, opens it "
|
||||
"again only while that write waits: at most 3 runs of 11 s), no "
|
||||
"sequence made", not hit(tr, 613, 40) and r["c"].car_writer.seq is None
|
||||
and 1 <= runs <= 3 and len(own) <= 3 * 11)
|
||||
check("...the car went on charging and nothing was written but the 0 A",
|
||||
r["sim"].power_w > 5000.0 and not r["sim"].writes("phases"))
|
||||
|
||||
print()
|
||||
if fails:
|
||||
print(f"FAIL: {len(fails)} check(s)")
|
||||
for f in fails:
|
||||
print(" -", f)
|
||||
sys.exit(1)
|
||||
print("ok: EV-15")
|
||||
Reference in New Issue
Block a user