Compare commits

...
25 Commits
Author SHA1 Message Date
ems-agentandClaude 8ba3e1c337 EV-05: shutdown keeps one command_site_release() call site
checks / unit (pull_request) Successful in 24m44s
infra-pin / fresh (pull_request) Successful in 1s
CI run 1737: test_sma10_two_idle_states counts the call lines of
command_site_release() in main.py (the Stop button and shutdown, 2); the
Solar-first branch had made it 3. Same order as before: in Solar the
charger's 0 A first, in Manual the inverters first.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-18 00:29:05 +01:00
ems-agentandClaude 29480fda47 EV-05: car Solar mode (spare sun to the car, Batteries or Car first, cut first for the peak)
checks / unit (pull_request) Failing after 24m58s
infra-pin / fresh (pull_request) Successful in 1s
Solar charges the car from the signed spare sun (car + battery charge - grid
import), less the batteries' room (Batteries first) and the sun kept back,
whole amps rounded down, at most one change per 30 s and only on 1 A. It
starts after ev_start_min of enough sun, holds 6 A for ev_pause_min, then 0 A.
Auto phases through EV-04's safe sequence (4.5 kW / 3 min up, 4.0 kW / 5 min
down, one switch per 10 min). What the peak guard would ask the batteries for
is taken off the car first, at once. Every way out of Solar ends at 0 A,
written once; at shutdown before the inverters go to 0 W.

- app/carmode.py: SolarPlan (pure) and SolarWriter (ManualWriter's one write
  site, its sequence and watch); spare_w, car_target_w, amps_for.
- app/ctl_car.py: Solar inputs, the cut, the solar kWh, EV-15's grace for
  Solar's own 0 A, no "set by the car" for Solar; main.py: shutdown order.
- Home card, HA select.goodwe_car_sun_first, sensor car_today_solar_kwh,
  three options with defaults, strings EN/NL, DOCS, DECISIONS, CHANGELOG.
- test_ev05.py, test_ev05_long.py, tools/ev05_sun.py; test_ev03/ev04 checks
  that pinned "Solar is refused" / "three entities" updated.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-17 23:54:06 +01:00
admin 9fdce023e9 Merge pull request 'EV-15: the add-on's own phase change at the peak reserve raises no false alarm' (#262) from EV-15 into release/1.0
infra-pin / fresh (push) Successful in 1s
2026-11-17 17:15:51 +01:00
glenn schrooyenandClaude Opus 5.5 7788543e09 EV-15 review: reflow the _car_own_pause docstring (one 123-char line)
checks / unit (pull_request) Successful in 22m10s
infra-pin / fresh (pull_request) Successful in 1s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC
2026-11-17 16:51:41 +01:00
glenn schrooyenandClaude 6d7046fc45 EV-15 round 2: the grace opens when the 0 A write is sent
checks / unit (pull_request) Successful in 20m56s
infra-pin / fresh (pull_request) Successful in 1s
The writer runs beside the cycle and the car can stop before the write
returns, so no sequence existed yet and the latch set. Window now opens at
send (zero_sent_at), cleared on return; ends on another writer in the tail too.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-17 15:24:30 +01:00
glenn schrooyenandClaude 07f703d1bc EV-15: test_ev15 guards its own indexing (named absence)
checks / unit (pull_request) Successful in 21m47s
infra-pin / fresh (pull_request) Successful in 1s
Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-17 13:39:11 +01:00
glenn schrooyenandClaude 2cfbc4aec8 EV-15: the add-on's own phase change at the peak reserve raises no false alarm
While the add-on holds the car at 0 A for its own phase change, the car's
figure had no corroboration (not charging), so nothing was explained and the
peak-floor alarm fired once. For grading only, the car's fresh, not stuck
figure now stands in for that sequence (bounded: its own waits plus one
corroboration window), ending at once on Off, Stop, shadow, unplug, another
writer or a refused write. car_exclude, the claim, floor and writes unchanged.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-17 13:26:56 +01:00
admin f66048b287 Merge pull request 'Release 0.24.0' (#260) from release-0.24.0 into release/1.0
infra-pin / fresh (push) Successful in 2s
checks / unit (pull_request) Successful in 21m46s
infra-pin / fresh (pull_request) Successful in 1s
2026-11-17 08:38:29 +01:00
review-agentandClaude Opus 5.5 69a1ccce1f REL-0.24.0 review: CHANGELOG wording (false-alarm scope, MQTT for HA controls, OPT-31 car charger)
checks / unit (pull_request) Successful in 22m11s
infra-pin / fresh (pull_request) Successful in 1s
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-17 08:15:59 +01:00
glenn schrooyenandClaude 9a355144fc Release 0.24.0: version bump and CHANGELOG
checks / unit (pull_request) Successful in 23m22s
infra-pin / fresh (pull_request) Successful in 2s
Minor bump: car Manual mode (EV-04), car-alone peak alarm fixes
(EV-10, EV-11, EV-12, EV-10b). Two new options with defaults
(ev_batt_cover, ev_mode_start); existing installs need no option change.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-17 07:19:58 +01:00
admin 628bde8013 Merge pull request 'EV-10b: grade the alarm on the house alone, no 0 W clip' (#259) from EV-10b into release/1.0
infra-pin / fresh (push) Successful in 2s
2026-11-17 00:20:55 +01:00
review-agentandClaude Opus 5.5 ff2eebe28b EV-10b review: pin the done-part clip and the car's power now in test_ev10b
checks / unit (pull_request) Successful in 22m9s
infra-pin / fresh (pull_request) Successful in 1s
Two checks a mutant survived: crediting the car-made export in the done part,
and taking off the car's quarter average instead of its power now.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 23:58:13 +01:00
glenn schrooyenandClaude b12776c705 EV-10b: grade the alarm on the house alone without the 0 W clip
checks / unit (pull_request) Successful in 22m5s
infra-pin / fresh (pull_request) Successful in 2s
The period without the car was clipped at 0 W, so batteries covering the car
were charged to the house and the floor alarm fired (rig F-1). New
car_exclude_alarm keeps the sign of the rest of the period; car_exclude (the
cover-off guard input) is unchanged.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 22:16:29 +01:00
admin b86c0153cf Merge pull request 'EV-10, EV-11, EV-12: car-alone peak alarm, steady car-over row, own write is not another writer' (#258) from EV-10 into release/1.0
infra-pin / fresh (push) Successful in 2s
2026-11-16 20:54:30 +01:00
Claude 269b89d6b0 EV-10 round 3: grade the floor case on the same landing with and without the car; per-quarter latches independent of the cover option; stricter write-mute test
checks / unit (pull_request) Successful in 20m56s
infra-pin / fresh (pull_request) Successful in 1s
Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 19:28:02 +01:00
Claude 646f61e730 EV-10 round 2: judge the car against the alarm's own landing; test failed writes; honest hold wording
checks / unit (pull_request) Successful in 22m4s
infra-pin / fresh (pull_request) Successful in 2s
Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 18:07:25 +01:00
Claude a60342e4e8 EV-10: test_ev10 points at MUTATION.md and guards its indexed reads
checks / unit (pull_request) Successful in 20m36s
infra-pin / fresh (pull_request) Successful in 2s
Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 16:12:42 +01:00
Claude 50d5ae90d2 EV-11: the end of a charging session clears the car-over state at once
checks / unit (pull_request) Failing after 29m5s
infra-pin / fresh (pull_request) Successful in 2s
Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 15:41:57 +01:00
Claude 8efc385956 EV-10, EV-11, EV-12: car-alone peak alarm, steady car-over row, own write not another writer
checks / unit (pull_request) Failing after 2m13s
infra-pin / fresh (pull_request) Successful in 2s
EV-10: the car is the cause when the period without it (projected minus the car's
fresh, corroborated average) is at or under the aim, also with the projection
still under it. EV-11: car_over stays on until the test has been false for 180 s.
EV-12: the tracker's own-write mute opens before the write and runs 15 s from its
return.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 15:27:46 +01:00
admin 75ebe22a4d Merge pull request 'EV-04: car Manual mode, never throttled for the peak, no false guard alarms' (#257) from EV-04 into release/1.0
infra-pin / fresh (push) Successful in 1s
2026-11-16 09:21:04 +01:00
glenn schrooyenandClaude 6e6344eb02 EV-04 round 3: guard the L4 test's reads for test_named_absence
checks / unit (pull_request) Successful in 21m33s
infra-pin / fresh (pull_request) Successful in 2s
Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 08:22:16 +01:00
glenn schrooyenandClaude f31dcb62b6 EV-04 round 3: undo restores the current in shadow mode too, energy rule catches a frozen 6 A figure, settle after a refused select
checks / unit (pull_request) Failing after 21m10s
infra-pin / fresh (pull_request) Successful in 1s
N1 the undo gives the old current back (clamped) in shadow mode; DECISIONS records it as the one write shadow mode allows.
N2 the corroboration looks back to a stretch with at least 40 Wh expected (60 s at 2.4 kW and up, 104 s at 1.38 kW).
L4 the current comes back 10 s after the phase select returned, also when it was refused.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 07:59:15 +01:00
glenn schrooyenandClaude 661a3b009a EV-04 round 2: race-free another-writer check, refused phase select, undo before the select, clamped restore, energy-corroborated car figure
checks / unit (pull_request) Successful in 21m14s
infra-pin / fresh (pull_request) Successful in 1s
M1 the writer ignores a reading taken before its latest confirmed write.
M2 a refused phase select gives the current back and stops after 3 tries (amber row).
M3 Off, shadow mode or a control/safety stop before the select undoes the change.
M4 the restore on shutdown (and the undo) is clamped.
M5 the car's power reaches the alarm path only while the charger's energy meter agrees with it.
L1 fuzz other-writer branch reachable and shown to run. L2 one wording. L3 Batteries-help-off text.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 06:51:15 +01:00
glenn schrooyenandClaude 0c92239a63 EV-04: car Manual mode, never throttled for the peak, no false guard alarms
checks / unit (pull_request) Successful in 21m48s
infra-pin / fresh (pull_request) Successful in 2s
Off and Manual (runtime state, Home and Home Assistant): the current (6 A to
the clamp) and the phases (1 or 3) are written once per user change through
the safe phase sequence, read back within 10 s, clamped to
min(ev_max_a, station limit, entity range). Shadow mode gates the writes.
The car's fresh power goes to the peak guard's alarm path: no false "Load too
high" or "Battery stopped limiting the peak", one grey notice per session.
ev_batt_cover and ev_mode_start options, peak line "set by the car", HA
entities, sim writes, DOCS, CHANGELOG, test_ev04.py.

Co-Authored-By: Claude <noreply@anthropic.com>
2026-11-16 05:24:36 +01:00
admin b65609133e Merge pull request 'Release 0.23.0' (#255) from release-0.23.0 into release/1.0
infra-pin / fresh (push) Successful in 1s
checks / unit (pull_request) Successful in 23m0s
infra-pin / fresh (pull_request) Successful in 2s
Release 0.23.0 (#255)
2026-11-16 03:55:37 +01:00
36 changed files with 8593 additions and 101 deletions
+2 -1
View File
@@ -49,10 +49,11 @@ SERIAL="test_loop.py test_freeze.py test_safety87.py"
# safety119 704, opt34 515, safety126 402, safety125 388, safety126b 364,
# modes_p3 377, safety94 360, modes_p4c 291, modes_p4b 238, tariff24_weather 235,
# modes_p4d 196, price_run_fixes 197, safety103 189, safety90 185, safety97 163.
# EV-05: ev05_long ~500 and ev05 ~375 alone (the Solar simulations).
# CI-18 split test_modes_p4, test_safety126 and test_safety125 so no one file
# is much over 400 s; test_opt34 and test_opt36 already fan out inside, and
# test_safety119 part 4 is one coupled block, so those three stay whole.
HEAVY="test_opt36.py test_safety119.py test_opt34.py test_safety126.py test_safety125.py test_safety126b.py test_modes_p3.py test_safety94.py test_modes_p4c.py test_modes_p4b.py test_tariff24_weather.py test_modes_p4d.py test_safety125b.py test_price_run_fixes.py test_safety103.py test_safety90.py test_safety97.py test_peakguard.py test_opt20.py test_safety81.py"
HEAVY="test_opt36.py test_safety119.py test_ev05_long.py test_opt34.py test_ev05.py test_safety126.py test_safety125.py test_safety126b.py test_modes_p3.py test_safety94.py test_modes_p4c.py test_modes_p4b.py test_tariff24_weather.py test_modes_p4d.py test_safety125b.py test_price_run_fixes.py test_safety103.py test_safety90.py test_safety97.py test_peakguard.py test_opt20.py test_safety81.py"
#
JOBS=${CI_JOBS:-10}
cd "${TESTS_DIR:-/w/goodwe-addon/goodwe_controller}"
+125
View File
@@ -1,5 +1,130 @@
# Changelog
### Not in a release yet
- When the add-on changes the car's phases while the batteries are at the peak reserve, there is no longer a false "Battery stopped limiting the peak" for a moment ([[EV-15]]).
- The car can charge from spare sun only (Solar mode), with the batteries or the car first, and it is cut first when the 15-minute period heads over the peak limit. Three new options with defaults ([[EV-05]]).
## 0.24.0
**A minor bump: the add-on can now charge the car (Manual mode), and a car that alone takes the batteries to the peak reserve no longer raises a false peak alarm. Two new options were added, both with defaults, and none needs setting.**
Two options were added (`ev_batt_cover` and `ev_mode_start`), none was removed or renamed, and no default changed (92 options, 90 before). **Existing installs need no option change:** the new options have defaults, and `ev_charger` is still off, so an install that does not use the car charger runs as 0.23.0 did. It is a minor bump because it adds a feature and new options; every saved setting still starts.
**The add-on can now charge the car.** This is the first version that writes to the car charger. On the *Car* card, choose **Manual** and set the current (6 A up to the charger limit) and 1 or 3 phases, on Home, or from Home Assistant when MQTT is on. **Off writes nothing.** The car is never slowed for the peak limit; the batteries help cover it unless you switch *Batteries help with the peak* off. **If your own automation in Home Assistant writes the same charger, switch it off before you choose Manual:** two writers fight over one setting. See "Car charger" in DOCS ([[EV-04]]).
**Car charger fixes.** When the car alone takes the batteries to the peak reserve, the add-on no longer says "Battery stopped limiting the peak"; a grey "Car over the peak limit" note says it instead, and the note stays steady instead of flickering. A change the add-on makes itself is no longer shown as "Something else changes the charger". A real overload of the house still raises the normal alarm ([[EV-10]], [[EV-11]], [[EV-12]]).
Contents of this release, in merge order since 0.23.0 (`b656091`):
| | |
|---|---|
| `75ebe22` | The add-on can charge the car: choose Manual on the *Car* card and set the current (6 A up to the charger limit) and 1 or 3 phases. Off writes nothing, the car is never slowed for the peak limit, and the batteries help cover it unless you switch that off. This is the first version that writes to the charger, so switch off any other automation that writes it ([[EV-04]], #257) |
| `b86c015` | When the car alone takes the batteries to the peak reserve, there is no false "Battery stopped limiting the peak". The "Car over the peak limit" note stays steady, and the add-on's own change is not shown as "Something else changes the charger" ([[EV-10]], [[EV-11]], [[EV-12]], #258) |
| `628bde8` | The false "Battery stopped limiting the peak" is now gone also when the batteries cover the car down to the reserve: the check counts the house alone. A real overload of the house still raises the alarm ([[EV-10]], #259, called EV-10b) |
### Known issues
- A false "Battery is not keeping up" can still show when the peak guard pauses a maintenance charge ([[SAFETY-92]]).
- A battery capped at a low limit with a perfectly flat reading can still trip the stale check ([[SAFETY-74]]).
- A battery whose reading at rest is beyond about ±175 W is still not caught when it refuses ([[SAFETY-97]]).
- The peak guard can still back off near the end of a 15-minute period when a meter reading is late, by less than 30 s. This is about the guard's discharge only; a grid charge is cut back since 0.19.2 ([[SAFETY-99]]).
- Two inverters: the maintenance charge can switch on and off while the house is above the peak aim ([[SAFETY-88]]).
- Two inverters: the "circulating" figure counts a battery's reading at rest ([[SAFETY-98]]).
- Two inverters: a drain that starts during a big step in house use can send the other battery to full power, and about 1 kW goes to the grid for about 10 s ([[SAFETY-104]]).
- Two inverters: when a battery comes back during a maintenance charge, the grid can step by several kW at once ([[SAFETY-101]]).
- Two inverters: when a battery drops out during a solar surplus, the others can swing by up to 1.5 kW in a simulation ([[SAFETY-105]]).
- Two inverters: after a drain ends, a change in house use can go unanswered for about 9 s, because some readings are old ([[SAFETY-106]]).
- Two inverters: when one battery's level is missing, both batteries are held at 0 W, and for about 15 s the last command stays on ([[SAFETY-108]]).
- Two inverters: if one battery's level stays missing for 12 h, the other battery's cycle can be marked failed, with a 7-day wait and a notice, though it is healthy. This comes from reading the code; it has not been seen on a site ([[MAINT-17]]).
- When the 15-minute demand forecast sensor counts the battery's own charge, the maintenance charge runs at about half the power the peak limit leaves, so it takes about twice as long (seen on a site: about 1.2 kW instead of 2.5 kW; the peak limit was kept). At the start of a month, before a peak above the limit, that is about 2 kWh a night in a rig test: the cycle can reach its 36 h limit after about 4 nights and fail, and since 0.22.0 the other battery gets no grid charge on those nights ([[SAFETY-111]]).
- One inverter: after a link drop, the battery's own safety stop to 0 W can be taken as a refusal, and the site stays at 0 W for up to 15 min ([[SAFETY-102]]).
- After a Home Assistant restart, control still waits until Home Assistant has finished starting, which can take several minutes, though the readings are already there ([[SAFETY-115]]).
- While Home Assistant is not answering, the page can list inverters as refusing commands and sensors as missing, and send you to Developer Tools, though they are fine ([[UX-37]]).
- If Home Assistant hangs or stops, the page keeps saying "Waiting for Home Assistant" and never turns into an alarm ([[SAFETY-113]]).
- Right after Home Assistant has started, the page can say for about 4 s that an inverter cannot be controlled, and the first command can come late ([[SAFETY-114]]).
- After a Home Assistant restart, the controller status sensor can still say "running" while the add-on cannot control. It was seen once, and the cause is not known ([[SAFETY-116]]).
- Battery modes on: after a planned top-up from the grid, the Batteries screen can say "Enough sun is forecast" ([[UX-32]]).
- Battery modes on: the forecast line "we count on" can show more sun than the plan counts, because the plan takes house use off first ([[UX-33]]).
- Battery modes on: before a planned top-up, the Today list shows a smaller "gives" amount than the plan will use; it grows as the charge happens ([[UX-34]]).
- Two inverters, battery modes on: while the other battery is in its maintenance charge, a battery's card can say it charges from the grid while it stays at 0 W ([[OPT-18]]).
- Two inverters, battery modes on: while a battery refuses to charge in a cheap run, the action log on the page gets about 8 lines an hour for its retries, and the page hint says "waiting for a better price" ([[UX-38]]).
- A battery in a safety stop, or one the add-on cannot reach, can still be started for a cycle, and its drain then waits about 12 h and ends in a failed-cycle notice. This comes from reading the code; it has not been seen on a site ([[MAINT-19]]).
- On the Settings page, the rows of the solar forecast lists are labelled "Phase 1", "Phase 2" instead of "Sensor 1", "Sensor 2" ([[UX-27]]).
- In the solar forecast list, a blank or repeated row makes "source 2 of 2" count differently from the rows on the Settings page ([[UX-28]]).
- The solar forecast message says "has no reading" also when the sensor shows a number that is too old or in the wrong unit ([[UX-29]]).
- If you use only the forecast lists, two Settings notes sit on the single-sensor field, and one of them tells you to set that field ([[UX-30]]).
- After a restart during a price outage, the "No prices" message can say "yet" when prices did come in earlier ([[UX-39]]).
- On the new settings page, you cannot see whether a price service token is set. Check the Configuration tab ([[UX-41]]).
- On the classic settings page, the first click on Save after editing a field can do nothing. Click again ([[UX-42]]).
- A steady overload on a 1 s meter can warn, and send the Home Assistant notification, 2 or 3 times at the start of each 15-minute period instead of once. The peak limit is still kept ([[SAFETY-122]]).
- A fixed tariff is priced once per hour, so a price window that starts or ends at :15, :30 or :45 gets the wrong price for part of that hour. Windows that start and end on the hour are right ([[TARIFF-23]]).
- Step 6 of the setup wizard stays empty because of an error in the page, in English and in Dutch ([[UX-51]]).
- On Dutch pages, refusal texts, the last-event line under the Home buttons, the installer details and the trading status sentences are still English, and a few Dutch texts read badly, such as "1 metingen geweigerd" ([[UX-52]]).
- Some price texts say "hour" where the add-on acts on a 15-minute period, such as "cheapest hour" ([[UX-47]]).
- After the add-on restarts, the Home price chart shows no price for the earlier part of today, and the setup check can say "12 of 24 hours", though the prices are known ([[UX-48]]).
- With battery modes on and only batteries on "Leftover solar", the Home price chart can mark a cheap period where no battery charges ([[UX-49]]).
- On a phone, the bars of the Home price chart are too thin to tap one 15-minute period. The arrow keys work ([[UX-50]]).
- In the last second of a 15-minute period, being a few watts over the aim can make the peak guard ask a battery for full power for one second. When a charge ends on a period edge, the last-second give can fade out over about 10 s, and a rig test exported up to 7.4 kW for about 8 s ([[SAFETY-124]]).
- During the night grid charge, a 15-minute period can end 6 to 14 W over the peak aim, because the battery charges harder than asked. This was seen in simulation; a rig test saw 2 to 8 W ([[OPT-35]]).
- The test rig could not bring back the false peak alarm that [[SAFETY-126]] fixes, so that fix is shown in simulation only. Watch the notifications for a few nights ([[TEST-35]]).
- The night cheap run is sized for the batteries' full charging power, not for what the peak limit leaves. Under a tight limit the run can end before the batteries reach their level, and Home can show a level they do not reach (79.9 % against a shown 95 % in a rig test) ([[OPT-25]]).
- By day, a Leftover solar plan that has only a daily forecast figure counts the sun from now, not from when the figure was read. It counts about 22 % too much for a figure one hour old; the night plan is not affected ([[OPT-30]]).
- The night charge can buy too much in a house that uses more at night than by day, such as one with a heat pump or a car charger that is not set up in the add-on, and on a sunny day, because spare sun in one expensive hour does not count for the later ones ([[OPT-31]]).
- A cheap run that has already started can overlap a new give run after a re-plan, so a battery can charge from the grid at the dearest price for part of an hour. This was seen in a test case, not on a site. Also in 0.19.2 ([[OPT-32]]).
- If the solar forecast sensors stop updating before 17:00, as in winter or further north, there is no forecast from three hours after their last update until 20:00 ([[OPT-33]]).
- With a forecast that gives only a daily total, the sun is spread an hour off on the two clock-change days after the change. The day's total is right ([[OPT-24]]).
- The add-on learns the house's use only once a solar forecast is set, so a site that adds a forecast later waits one more day for its first plan ([[OPT-26]]).
- Home says "No trading on price yet: no prices have arrived" when every battery is on Solar first, though the prices are shown ([[UX-55]]).
- The Home plan header can say "Charges in the cheapest hour, gives power in the dearest" when Home draws no charge, and it says "hour" for 15-minute prices ([[UX-56]]).
- While the peak guard holds back charging, Home hides the rest of the cheap run and gives no reason. The charge starts again when the guard lets go ([[UX-57]]).
- With battery modes on and selling on, Home can draw a "Sells up to" block when the add-on judges the trade not worth it, and then it will not sell ([[UX-58]]).
- Home, the plan and the Forecast tab stop drawing a battery's give at the trading floor, though control goes on giving down to the battery's cut-out ([[UX-59]]).
- During a price outage, the Batteries screen says "Prices differ too little" and Home says "The price gap is too small" ([[UX-60]]).
- With battery modes on and no meter, or a meter that is a Home Assistant entity, a grid charge is not possible and nothing says so ([[UX-61]]).
- On the Batteries screen, a charge the add-on refused in a cheap run reads as "Saves its power for ...", for up to 15 minutes ([[UX-62]]).
- A Leftover solar battery with no capacity set never charges from the grid when a solar forecast is set, and nothing warns about it ([[UX-63]]).
- The "How the modes work" box on the Batteries screen does not describe Cheap hours only ([[UX-64]]).
- With battery modes on, Settings still shows "Trade on the price spread", which the modes ignore. A site with modes on and no price source starts, and the Batteries screen says "No prices, so it follows the house" without pointing to Settings ([[UX-65]]).
- With battery modes off and several equal prices in a row, Home and the Forecast tab draw one price quarter, while the add-on trades every quarter of the run ([[UX-67]]).
- Late in the day, the Forecast tab's "now" line and last bars sit over the axis labels at the right edge ([[UX-68]]).
- The Forecast tab's level curve charges at each battery's full rating. Under a peak limit the levels it draws are too high and a charge block can end early (54.6 % shown against 39.7 % in a rig test) ([[UX-70]]).
- The peak forecast check says maintenance charging is not kept under the peak limit when no peak forecast is set, but since 0.19.2 it is ([[UX-73]]).
- The peak guard row can show the same figure twice, such as "at this rate 3 500 W, over 3 500 W". Also in 0.19.2 ([[UX-74]]).
- If the inverter's setpoint entity appears in Home Assistant after the add-on has started, the page keeps saying "Inverter control: not found in Home Assistant" and the batteries say "An alarm stopped control" until a restart, though control runs ([[UX-75]]).
- In the last minute of a 15-minute period, with Home Assistant readings 30 s late, the period can end about 80 W over the peak aim and over the limit: 3 530 W against a 3 450 W aim and a 3 500 W limit in a rig test with a 2 kW load added 45 s before the end. The peak guard sees the load too late to hold it back ([[SAFETY-133]]).
- With Home Assistant readings 10 s late, the grid charge in a cheap run can swing by several kW. In a test the add-on asked for an 8.7 kW charge (9.6 kW on 0.20.0) ([[SAFETY-132]]).
- A plan rebuilt while the battery levels are missing for a moment can drop a cheap run that has not started yet, so the battery does not charge that day. Seen in a replay of real prices, where it cost about EUR 0.40 of extra grid use; the Leftover solar change in 0.20.1 no longer triggers it in those replays, but the cause stays ([[OPT-37]]).
- On a 5 s meter, Home Assistant readings 10 s late are still not caught, and readings 15 s late only after about 4 minutes. Control now follows the meter more gently, so less goes to the grid: in a simulation with a changing load, 340 Wh became 189 Wh at 10 s late and 363 Wh became 296 Wh at 15 s late. In a rig test, 15 s late exported 13 to 19 % more than before ([[SAFETY-136]], [[SAFETY-134]]).
- With readings 10 to 15 s late, the hold can end in the middle of the delay and the swing can come back. Seen in rig tests with a 2 s and a 5 s meter ([[SAFETY-134]]).
- With readings 10 s late on a 1 s meter, the grid can still move between -422 and +340 W while the batteries are held. With a very long delay (30 to 90 s) the request can swing by about 900 W every few seconds. Seen in review tests ([[SAFETY-130]]).
- A battery that answers very slowly (10 s or more) can be taken for late Home Assistant readings and held, and the page then blames Home Assistant. A GoodWe battery settles in about 6 s and this has not been seen on one ([[SAFETY-131]]).
- The page row for late readings reads awkwardly in English ("Home Assistant readings show requests about N seconds late, so control holds the batteries"), and the Dutch text misses a word ([[UX-78]]).
- When the add-on stops, a write that takes more than 2 s can still land after the 0 W, and the 30 s safety timer on the ESPHome board then sets 0 W. After the Stop button, a cycle that had already decided can send its share (560 to 670 W) just after the 0 W; the next cycle sends 0 W again ([[SAFETY-138]]).
- In the last hour of a cheap run, Home can draw a battery's grid charge up to an hour past the time control stops charging it. It only draws too much, never too little ([[UX-79]]).
- A tomorrow solar forecast sensor that reports just after midnight with yesterday's value can be used as the new day's forecast for up to 12 hours. This has not been seen on a site ([[OPT-39]]).
- During a cheap-hours charge, at some 15-minute boundaries the add-on sends 0 W for one tick ("no trade (headroom)") and then goes on. Seen in a rig test, in 5 of 8 cases; once, with a frozen battery reading, it left a battery at 0 W until 23:45 ([[OPT-40]]).
- While one battery's monthly cycle charges, the other battery's card on Home says "Saves its power for higher prices", and the plan still shows its grid charge in the cheap hours, though it will not charge ([[UX-80]]).
- After a failed monthly cycle, the plan line shows the day the wait ends, such as 18 November, not when the cycle tries again, such as 19 November at 19:00 ([[MAINT-26]]).
- At the start of a cheap window the peak guard can step once although the period is under the aim, and the step can land on a battery in its monthly charge. In a rig test it gave 1.7 to 2.3 kW for 6 s ([[SAFETY-140]]).
- A grid charge at full power in the last seconds of a 15-minute period can run into the next period, where the peak guard cuts it back ([[SAFETY-139]]).
- In a long real peak, the peak guard can end a 15-minute period up to 10 W over its aim, as 0.22.0 does (up to 31 W there). In a rig test the month's highest peak did not rise ([[SAFETY-141]]).
- The peak reserve notification can be created again and again, 24 to 47 times in 2 hours in a rig test, while the guard holds a battery at its reserve. 0.22.0 does the same ([[MAINT-29]]).
- When you switch the car charger off, its three sensors stay in Home Assistant with their last values. From reading the code, the PV power sensor does the same when it is switched off ([[TEL-19]]).
- In Settings, the choice for no car charger says "None", while its help says "Off" ([[UX-81]]).
- DOCS names the car's energy sensor `goodwe_car_today_kwh`, but Home Assistant creates it as `sensor.goodwe_car_energy_today` ([[TEL-20]]).
- When the charger refuses a current, the Car card can show two amber rows: "Charger did not take it" and "Charger reading may be stuck" ([[EV-13]]).
- In shadow mode, and after a phase change was given up, the Car card's *Why* line says what you set, not what the charger does ([[EV-14]]).
- When the add-on changes the car's phases while the batteries are at the peak reserve, "Battery stopped limiting the peak" can show for a moment, with one notification ([[EV-15]]).
- With *Batteries help with the peak* on, the Car card's *Why* line can switch between two wordings while the car is over the peak limit ([[EV-16]]).
### If you are crossing from a version older than 0.10.0
`## 0.10.0` below can refuse an old config: `slew_w` above its limit, and the
withdrawn `price_provider` ids `engie_dynamic`, `totalenergies_dynamic` and
`eneco_eddy`. Read it before you update. Run `tools/predeploy_check.py` with the
bare options (`jq '.data.options'`) first.
## 0.23.0
**A minor bump: the add-on can now read a car charger (Alfen, through Home Assistant), and with two inverters a maintenance charge stays paused during a real peak. Four new options were added, all with defaults, and none needs setting.**
@@ -0,0 +1,178 @@
# EV-04 — Manual mode: the first write to a car charger
The design is `reports/EV-01-design-report.md` (sections 2 to 5), accepted on
2026-11-15 with all eight decisions as recommended. This record keeps what the
code had to decide that the design left open.
## What writes, and who may
`app/carmode.py` `ManualWriter` is the only caller of `write_current` and
`write_phases` (test_ev03.py greps for any other). It runs in a background task
(`ctl_car.CarMixin.car_kick`), never in the control cycle: a write waits up to
10 s for the charger's read-back, and the cycle must never wait for a charger.
- **Off writes nothing.** The mode is runtime state in the store (`car_mode`,
`car_current`, `car_phases`), changed on Home or from Home Assistant with no
restart. Solar and Night are not accepted (EV-05, EV-02).
- **Once per user change.** A user change sets a flag the writer clears when the
charger has what was asked. A difference nobody asked for is the other-writer
detector's business, not a reason to write.
- **No car or a full car: nothing is written**, and the setting waits for a car.
- **Shadow mode and a stopped control write nothing**; the card says what the add-on
would set.
- **The clamp is the driver's too.** The writer asks for at most the clamp, and
`AlfenHaDriver.write_current` refuses anything above
`min(ev_max_a, station limit read now, entity range max)`: it sends nothing,
logs `CHARGER_CLAMP` at ERROR (the OUTPUT_CLAMP shape) and answers False.
- **"Taken"** means the read-back followed within 10 s. A write that was not
taken is tried again after a minute, three times, then it waits for the user
(an amber row). A late read-back is adopted, never called another writer.
## The phase sequence
0 A, wait until the charger reports under 100 W or mode3 leaves C (20 s at most),
select the phases, wait 10 s, write the current. One switch per 10 minutes. A
charger that does not take the 0 A never gets the phases select. A sequence that
has begun is finished whatever the mode, because it leaves the car at 0 A
otherwise; a stop of the add-on in the middle gives the car its current back
(`car_shutdown`).
## Another writer
A read-back that differs from what the add-on last wrote (or tried to write, or
saw before a refused write) for 30 s is another writer: a grey row, and no write
until the user changes the mode or a value. EV-03's detector still serves Off;
the tracker mutes its own detector for 15 s after each of our writes, so Manual
back to Off does not show the add-on as a second writer.
## The peak guard's alarm path
`Controller` passes the car's power to the guard's alarm path (`car_cycle`).
**The car explains the excess when the house alone would land the period under
the aim**: the car's average over the whole period (what it drew so far, and its
power now for the rest, `car_avg_w`) is at least how far the projected period is
over the aim. With decision 1 on it also needs the guard to be unable to hold
it (saturated or at the peak reserve). Then "Load too high" and "Battery stopped
limiting the peak" are not raised, the rows are not red, and one grey notice per
charging session says so. The claim, the floor and the commands are unchanged.
The brief's wording is `car_w >= projected excess over the aim`. The
instantaneous form (`car_w >= excess_w`, the watts to come off the meter now)
stops holding late in a period that the car already pushed over, because
`excess_w` grows as the seconds run out; the average form does not, and it is the
same test for a steady car.
**A stale, stuck or frozen car figure must never hide a real overload.** Only
`CarTracker.car_w_trusted` is used: fresh (the EV-03 rules, which also make an
unavailable reading None at once), not stuck after a write (SAFETY-37's shape),
never above what the read-back allows, and CORROBORATED by the charger's energy
meter (round 2). The rule (`CarTracker.corroborated`, constants `CORR_*` in
`chargers.py`): the charger reports charging (mode3 C) and has an energy entity,
and, looking back over unbroken charging readings to the shortest stretch that
is at least 55 s long and over which the reported power adds up to at least
40 Wh, the meter has gained at least 50 % of that, less 15 Wh (the meter shows
10 Wh steps, so at 40 Wh it must show one step; an honest car can fall one step
short and still passes). Readings are kept 180 s. A gap, a state other than C or
a meter that goes back starts the history again. With no such stretch yet (a
session just began, or the add-on just started) the figure is believed, so a
charge does not raise false alarms for its first minute; a frozen figure is
believed for that long only. No energy entity: never corroborated, so the normal
alarms stand. **Bound:** a frozen figure of P watts on a car that has really
stopped is caught within max(60 s, 40 Wh / P): 60 s from 2.4 kW up, 104 s at
1.38 kW (6 A, 1 phase, the lowest charge), plus the alarms' own 10 s hold. Below
about 0.8 kW (40 Wh over the 180 s kept) the figure is believed; it cannot hide
an overload that matters. (Round 2 had a 15 Wh slack that cancelled the 50 % rule
up to 1.8 kW; the 40 Wh floor fixes that.)
## EV-10, EV-11, EV-12: the rig's three findings (EV-04 test F-1 to F-3)
- **The car is the cause when the alarm's own test says so, on the same
landing** (EV-10). `car_cycle` (`_car_explains_alarm`) runs the alarm's test on
the period as it is and on the period without the car's fresh, corroborated
average (`car_exclude_alarm`, EV-10b below): the car explains the alarm only if it is true with the
car and false without it. A saturated guard, and a floor with other batteries
left, use `load_too_high` on the landing (the batteries give only what they
still can). A floor that leaves nothing uses SAFETY-126's `misses_aim` (the
batteries at 0 W from now on), which is latched for the quarter; the add-on keeps
that latch twice, with and without the car, from the same readings. Both reset
at a new quarter and when the guard stops wanting power, and they run every
cycle, so the cover option does not touch them. This holds with the projection
still under the aim (rig: 5888 W against 6000 W). A car of 0 W makes the two the
same, so it explains nothing; a stale, stuck or uncorroborated figure is `None`,
sets the latch without the car, and the normal alarms stand. There is no minimum
car power: the comparison itself is what separates car from house.
- **The period without the car is not clipped at 0 W** (EV-10b). The rig showed
EV-10 failing: house 3 kW, car 11 kW, batteries 8.1 kW, aim 6 kW. The batteries
give more than the house uses, so the house alone is an export; `car_exclude`
clipped it at 0 W, `misses_aim` added the batteries' full 8.1 kW back, the
"house needs the batteries" latch set early in the quarter, and the floor alarm
could never be explained. `car_exclude_alarm` (alarm grading only) builds the
house alone as: rest of the period `held - car_w`, keeping its sign, so
`misses_aim` adds the batteries back to `held - car_w + batt` = the house; done
part `max(0, done - car so far)` in Ws (no export is credited that only the
car caused); landing `(done + max(held, 0) * left) / 900`. Without a fresh
car reading it is the period as it is. `car_exclude` (the projection the guard
sees with the cover off) is unchanged, with its clip.
- **Steady row, no hold on the alarm** (EV-11). Cause: after the car's own quarter
became the month peak, the aim sat on the grid it made (14.04 kW +-40 W), so
the test crossed the aim every few seconds. `car_over` (row, card, notice) now
stays on until the test has been false for `OVER_OFF_HOLD_S` = 180 s (longer than
the gaps seen on the rig, 150 to 250 s at 50 s sampling, and shorter than a
quarter) and a gap does not restart the 10 s
on-count. `car_explains`, which the alarms read, has no hold.
- **Our own phase change is not a reason to alarm** (EV-15). Rig, twice: at the
reserve, with the car covering, the add-on's 3 -> 1 switch set the car to 0 A.
A car that is not charging has no corroboration (`CarTracker._corr_note` clears
the window, `corroborated` is False), so `car_alarm_w()` was None, the car
explained nothing and `_car_need_excl` latched for the quarter: one
PEAK_GUARD_FLOOR_LIMITED and one `goodwe_peak_soc_floor`. Now, only for grading
(`car_cycle`), `ctl_car._car_own_pause` lets the car's fresh, not stuck figure
(`CarTracker.car_w_paused`, 0 W while paused) stand in without corroboration:
from the moment our 0 A write is SENT (`zero_sent_at`: the cycle runs beside
the writer and the car stops before the write returns), until the current is
set again, at most
`OWN_PAUSE_MAX_S` (85 s, the sequence's own waits), then at most one
corroboration window (60 s). It ends at once on Off, Stop, shadow, unplug,
another writer, or a refused select or write (`seq["failed"]`). The energy it
drew in the pause is kept apart (`ws_p`), so `car_exclude`, the guard's
input, the claim, floor and writes are unchanged. A house overload still fails
the test without the car, so it alarms as on Off.
- **Our own write is ours until its mute ends** (EV-12). The mute of the tracker's
own detector opens before the write and runs 15 s from when it returns, because
the read-back reaches the cycle while the write still waits for it.
## The one write shadow mode allows
When the add-on has paused the car (0 A) for a phase change and has not yet
selected the phases, Off, a stop of control, a safety latch or shadow mode ends
the change. The old current is given back (clamped, `_restore_a`) in every one of
those cases, shadow mode included. With the shipped `shadow_mode: auto`, stopping
control turns shadow on, so without this the car would stay at 0 A for as long
as control is stopped, while the design's Manual column says the current
stands. Undoing our own half-done change is not a new command; it is the same
write the shutdown restore makes. Nothing else is written in shadow mode: no
phase switch, and no write afterwards.
## Decision 1 (`ev_batt_cover`)
On (the default): the guard works as it does and the batteries cover the car down
to the peak reserve. Off: the projection the guard sees leaves the car out
(`house - car_w`, with the car's average so far), so it does not force the
batteries to discharge for it, and the period goes over by the car alone. The
car is never throttled either way. The projection the guard sees is also the
one `charge_room_w` reads, so with the switch off a grid charge of the batteries
sees the room the car leaves; that is the owner's trade and DOCS says so.
## Deviations from the design text
- **Titles and setting names** follow STYLE.md (at most 5 and 6 words):
"Car over the peak limit" (the design: "Car charge over the peak limit"),
setting "Batteries help with the peak" (the design: "... while the car
charges", which is in its description).
- **No "or choose Solar"** in the Why or the notice: Solar is not in this card.
- **The Why lines** are two sentences of at most 12 words, as test_messages.py
asks; `peak.car` says "The car takes {car} and the batteries cover {cov}."
without "of it".
- **`peak.set_by_car`** keeps its first sentence only ("The batteries were at the
peak reserve" is not true with decision 1 off). A quarter counts as set by the
car when the car drew half the peak or more over it.
@@ -0,0 +1,54 @@
# EV-05 — Solar mode: spare sun to the car
The design is `reports/EV-01-design-report.md` (sections 2 to 5, decisions 2 and
5) and the EV-05 brief v3 (owner answers Q1 and Q4, 2026-11-17). This record
keeps what the code had to decide.
## Where it lives
`carmode.SolarPlan` decides (pure, monotonic clock): what current, on what
phases. `carmode.SolarWriter` makes the charger match it. It is a subclass of
`ManualWriter`, so the write, the read-back, the phase sequence and the
other-writer watch are Manual's and there is still one `write_current` and one
`write_phases` call in `app/` (test_ev04.py's AST check). `ctl_car` builds the
inputs (`car_sun_inputs`) and runs the writer in the same background task.
## The rules the brief left open
- **Entering Solar starts at 0 A.** Choosing Solar, a restart in Solar, the
charger or Home Assistant coming back, a charger error or a stuck reading
clearing, and control starting again all reset the plan: 0 A if the charger
shows more, then the start rule. Switching from Manual to Solar therefore
pauses a Manual charge for the start dwell. Simple and on the safe side.
- **The peak cut is what the guard would ask the batteries for.** The excess is
taken off the car only when the guard is engaged and wants a discharge
(`wanted_w > 0`), and by `min(excess, wanted)`. Batteries that only stop
charging in a cloud's first seconds are not "asked", so a cloud does not cut
the car. A partial cut caps the car for the rest of that 15-minute period.
- **The 4.0 to 4.14 kW band on 3 phases.** 3 phases need 4.14 kW at 6 A, the
switch back to 1 phase is under 4.0 kW. Inside that band the car holds 6 A on
3 phases with no pause count (the hysteresis the design chose). Under 4.0 kW
the down-switch comes after 5 minutes; if the 10-minute gap blocks it, the
pause rule does instead.
- **A phase switch also waits for the 30 s write rule**, so the current set
after a switch is never sooner than 30 s after the one before it.
- **The meter's age.** The spare is not computed from a meter reading older
than `stale_input_s`, also when `meter_max_age_s` (P1) is longer.
- **A stale, stuck or not corroborated charging car makes the spare unknown**:
hold, then 0 A after *Pause after*. A paused or idle car with a fresh reading
counts 0 W (`car_w_trusted` is None outside mode3 C).
- **A stuck reading's 0 A is written whatever the frozen read-back says**, since
that read-back means nothing then. Every other exit skips the write when the
charger already shows 0 A, and never writes over another writer.
- **The guard's alarm path** uses the Solar car like Manual's
(`car_alarm_w`), and Solar's own 0 A (pause, cut, phase change) gets EV-15's
bounded grace (`_car_solar_pause`). A Solar quarter is never banked as "set
by the car", and Solar shows no *Car over the peak limit*.
- **Shadow mode** runs the plan without writing, so the card says what it would
set; the charger got its one 0 A when shadow mode came on.
## Solar kWh
Per cycle in Solar: `min(car power, max(0, spare - room))` Batteries first,
`min(car power, max(0, spare))` Car first; never above today's kWh; reset at the
day change; kept in the store (`car_sun`).
+143 -23
View File
@@ -251,10 +251,15 @@ The label and description each setting shows on the Configuration tab, in tab or
| Safety | Opposing inverters time (s) | `circulation_hold_s` | For two or more inverters: how long they may push against each other before a safety stop. Derived value, leave it unchanged. |
| Safety | Not delivering alarm after (s) | `delivery_hold_s` | For two or more inverters: how long one may fall short of its share before an alarm, which changes nothing. Derived value, leave it unchanged. |
| Safety | Shadow mode | `shadow_mode` | The add-on makes every decision but keeps every inverter at 0 W. 'auto' does this while control is stopped, 'on' always, 'off' never. |
| Car charger | Charger | `ev_charger` | Which car charger the add-on reads. Off leaves everything as it is. This version only reads the charger and never changes it. |
| Car charger | Charger | `ev_charger` | Which car charger the add-on drives. Off leaves everything as it is. In Off mode the add-on only reads the charger and never changes it. |
| Car charger | Current setting entity | `ev_current_entity` | The entity that sets the charger's current. The add-on finds the charger's other entities from its name. |
| Car charger | Charger limit (A) | `ev_max_a` | The most current the charger may ever be asked for. Never above what the charger reports. Lower it for a weaker fuse or cable. |
| Car charger | Phases | `ev_phases` | How many phases the charger may use: 1, 3, or 1 and 3 (auto). |
| Car charger | Batteries help with the peak | `ev_batt_cover` | While the car charges. On: the batteries cover it down to the peak reserve. Off: the peak guard leaves the car out, so the car alone can set the peak. |
| Car charger | Mode after a restart | `ev_mode_start` | Keep the last mode, or start in Off. In Solar a restart sets the charger to 0 A first, other modes leave its current. |
| Car charger | Sun kept back (W) | `ev_margin_w` | Solar: this much spare sun is never given to the car. |
| Car charger | Start after (minutes) | `ev_start_min` | Solar: the car starts after this long with enough spare sun. |
| Car charger | Pause after (minutes) | `ev_pause_min` | Solar: with too little sun the car holds 6 A this long, then pauses. |
| Advanced | Start control on boot | `auto_start` | Off by default. Leave it off until the site is commissioned, so someone presses Start after each restart. |
| Advanced | Control gain | `gain` | How much of the remaining error control corrects each cycle. Measured on real hardware, do not raise it. |
| Advanced | Largest change per cycle (W) | `slew_w` | How far the command may move in one cycle. 0 follows “Inverter rating” and is recommended. |
@@ -3275,9 +3280,11 @@ it.
### Car charger
The add-on can read your car charger and show it on **Home**, on a *Car* card. In
this version it only reads. It never changes the charger, so it is safe to run
beside your own automation. Later versions will add charging modes.
The add-on can drive your car charger and shows it on **Home**, on a *Car* card.
The card has three modes in this version: **Off** (the add-on only reads the
charger and writes nothing), **Manual** (the add-on sets the current and the
phases you choose) and **Solar** (the car charges from spare sun only). Night
mode comes in a later version.
| option | meaning |
|---|---|
@@ -3285,44 +3292,141 @@ beside your own automation. Later versions will add charging modes.
| `ev_current_entity` | The charger's current setting, for example `number.wallbox_power_connector_max_current_socket_1`. The add-on finds the charger's other entities from this name. |
| `ev_max_a` | The most current the charger may ever be asked for. It cannot be higher than the station limit the charger reports. |
| `ev_phases` | `1`, `3` or `auto` (1 and 3). |
| `ev_batt_cover` | On (the default): the batteries help cover the car down to the peak reserve. Off: the car is left out of what the peak guard protects. |
| `ev_mode_start` | `keep` (the default) or `off`: the mode after a restart. |
| `ev_margin_w` | Solar: spare sun never given to the car, 0 to 1000 W (default 100). |
| `ev_start_min` | Solar: minutes of enough sun before the car starts, 1 to 30 (default 2). |
| `ev_pause_min` | Solar: minutes the car holds 6 A with too little sun before it pauses, 1 to 30 (default 5). |
**What the Car card shows.** The state (Charging, Connected waiting, No car
connected, Car is full, Charger not reachable), the power and current, and the
energy charged today. The car's power is taken out of the **House** tile and out
of the house profile that plans the batteries' night charge, so the batteries
no longer buy energy for a car that charged last night. The peak limit works as
before: the car is still part of what the grid meter sees.
no longer buy energy for a car that charged last night.
**Manual mode.** Choose *Manual* on Home, then set the current (6 A up to the
charger limit) and 1 or 3 phases. The same three are Home Assistant entities
when MQTT is on: `select.goodwe_car_mode` (Off, Manual), `number.goodwe_car_current`
and `select.goodwe_car_phases`. The mode, the current and the phases apply at
once, with no restart. The add-on writes each one once, when you change it, and
checks within 10 seconds that the charger took it.
- The current is never higher than the smallest of the charger limit, the station
limit the charger reports and the charger's own range. A value above that is a
software fault: it is logged and never sent.
- With no car connected, or a full car, nothing is written. The setting waits
until a car is connected.
- A phase change always goes through the same steps: 0 A, wait until the
charger draws under 100 W (at most 20 seconds), select the phases, wait 10
seconds, set the current again. At most one phase change per 10 minutes.
- Shadow mode keeps the charger alone, as it keeps the inverters alone: the card
says what the add-on *would* set. Nothing is written either while control is
stopped.
- A restart, stopping control and a safety stop leave the charger at its
current. When the charger answers again after being away, the add-on sets your
current again only if the charger shows a different one.
- Off writes nothing, ever.
**Solar mode.** Choose *Solar* on Home (or `Solar` on `select.goodwe_car_mode`)
and where spare sun goes first: **Batteries** or **Car** (`select.goodwe_car_sun_first`).
Both apply at once, with no restart.
- *Spare sun* is solar production less the house, measured without a solar
sensor: the car's power, plus what the batteries charge, less what the grid
gives. A grid charge of the batteries, or batteries giving more than the house
uses, is never spare sun.
- *Batteries first*: the car gets what is left after the full rating of every
battery that may still charge (switched on, not refusing, not full), less
*Sun kept back*. So the car gets sun only when the batteries charge at full
power or are full. *Car first*: the car gets the spare sun less *Sun kept
back*, and the batteries charge with what it leaves.
- The current is whole amps, rounded down, from 6 A to the charger limit. It
changes at most once per 30 seconds, and only by 1 A or more.
- The car starts after *Start after* (2 minutes) of sun for at least 7 A. With
too little sun it holds 6 A for *Pause after* (5 minutes), from the batteries
where they can, then pauses at 0 A: the card says *Waiting for sun*.
- With `ev_phases` `auto` a start goes on 1 phase. It moves to 3 phases after
3 minutes at 4.5 kW or more, and back to 1 phase after 5 minutes under 4 kW,
at most once per 10 minutes, always through the safe phase steps above. A car
that draws one phase while three are allowed is counted on one phase.
- **The car is cut first for the peak limit.** When the 15-minute period heads
over the limit and the peak guard would ask the batteries for power, that is
taken off the car first, down to 0 A at once. A Solar charge never sets the
month's peak.
- **Every way out of Solar leaves the charger at 0 A**, written once: a stop or
restart of the add-on (before the inverters go to 0 W), stopping control, a
safety stop, shadow mode turned on, choosing Off, an unplugged car, a charger
error or a stuck reading. After the charger or Home Assistant was away, the
add-on first sets 0 A, then starts again by the rules. A meter that stops
gives a hold for *Pause after*, then 0 A. Choosing Manual leaves it to Manual.
- Another writer stops the add-on's writes after 30 seconds, with an amber row
and a warning, until you press the mode again or the charger shows the
add-on's value again.
- The card shows *{kWh} charged today, {kWh} from the sun*, also as
`sensor.goodwe_car_today_solar_kwh`. Only the sun the car could take counts,
not the battery or grid share of a hold, and not Manual.
**The car is never slowed for the peak limit in Manual.** A Manual charge goes on whatever
the 15-minute peak does. With the default `ev_batt_cover` on, the batteries help
cover it down to the peak reserve; a 3-phase 16 A charge (11 kW) can empty two
batteries to the reserve in about 1.5 hours, and the month's peak then rises by
what the car drew. When the car alone is why the batteries cannot hold the
period, the add-on does **not** raise *Battery stopped limiting the peak* or
*Load too high for battery*. It shows a grey note *Car over the peak
limit* once per charging session, a grey row, and says so in the car's *Why*.
This holds only while the car's reading is fresh and the charger's energy
meter confirms it (the meter must have gained at least half of what the power
adds up to over the last minute). A stale, stuck or frozen reading, or a
charger with no energy entity, never hides a real overload of the house: the
normal alarms stand. With `ev_batt_cover` off, the peak
guard protects the house without the car, so it does not spend the batteries on
it. Normal zero-grid control can still discharge them for the car, and a grid
charge of the batteries can bring the period to the peak limit plus the car.
The period can go over by the car alone. When the month's peak was set by a car
charge, Home's peak line says so.
**When the charger does not answer.** After 30 seconds the card says *Charger
not reachable* and one amber row appears. After 5 minutes one notification
follows. While the car reading is older than 15 seconds the House tile shows no
reading, and that moment is left out of the house profile, rather than guessing
how much the car took.
how much the car took. A reading that does not move for a minute after the
add-on changed the current shows the amber row *Charger reading may be stuck*;
the add-on goes on writing. If the charger does not take a phase change three
times, an amber row says so and the add-on stops trying until you change
something; the car gets its current back each time.
**Another controller.** If the charger's current changes while the add-on writes
nothing, something else sets it, usually your own automation. The page then shows
the grey row *Another controller changes the charger*. That is expected while
you migrate.
**Another writer.** In Manual, if the charger shows a different current than the
add-on set, for 30 seconds, something else is setting it, usually your own
automation. The page shows a grey row, and the add-on writes nothing over it until
you change the mode or a value. In Off the grey row *Something else changes the
charger* shows for an hour after a change. That is expected while you migrate.
**Moving your own automation to the add-on.** Each step can be undone.
1. Install this version and set `ev_charger` to `alfen_ha`. The add-on reads the
charger and writes nothing. Compare the card with your automation for a few
days.
2. When a later version adds charging modes, switch your automation **off**
(do not delete it) in the evening with the car unplugged, then choose the
add-on's Manual mode with the current your helper held. Plug in and check the
current on the card and on the charger's display.
3. On the next sunny day, choose Solar, with *spare sun goes first to* set as
your priority switch was.
1. Install this version and set `ev_charger` to `alfen_ha`. The mode starts in
**Off**: the add-on reads the charger and writes nothing. Compare the card
with your automation for a few days.
2. Cut-over, in the evening with the car unplugged: in Home Assistant switch your
automation **off** (do not delete it). On the card choose **Manual** with the
current your helper held (`input_number.ev_manual_current`). Plug in and check
the current on the card and on the charger's display.
3. On the next sunny day, choose **Solar**, with *Spare sun goes first to* set
as your priority switch was (*Batteries* or *Car*), and *Sun kept back* as
your automation's margin. Watch the card's *Why* through a cloud: the car
holds 6 A for 5 minutes, then waits for the sun.
4. Keep your Home Assistant helpers for a week. To go back, set the add-on mode
to Off and switch the automation on. After that you can delete the helpers and
the automation.
Never let the automation and the add-on both write the charger.
**Never let the automation and the add-on both write the charger.** Two writers
fight over the one setting and neither can tell which won. Turn the automation
off before you choose Manual, and the add-on off (mode Off) before you turn the
automation on.
**Home Assistant entities.** With MQTT the add-on adds three sensors:
`goodwe_car_power`, `goodwe_car_state` and `goodwe_car_today_kwh`.
**Home Assistant entities.** With MQTT the add-on adds the sensors
`goodwe_car_power`, `goodwe_car_state`, `goodwe_car_today_kwh` and
`goodwe_car_today_solar_kwh`, and the four controls named above. A saved ("retained") command is never applied, so a
restart of Home Assistant cannot change the charger.
### Site
@@ -3451,6 +3555,21 @@ last setting. The add-on changes nothing on the charger in any case. Check the
charger's integration in Home Assistant. The notification goes by itself when
the charger answers again.
### Car over the peak limit
The car charge you set (Manual) takes the 15-minute period over the peak limit,
and the batteries cannot hold it because they are at the peak reserve or at
their full power. The add-on never slows the car, so this is information, not an
alarm. It is raised once per charging session. To stay under the limit, lower the
current.
### Charger error, car paused
In Solar mode the charger reports an error, so the add-on set the car to 0 A
and writes nothing more until the error clears. Then the car starts again by
the Solar rules. Check the charger itself. The notification goes by itself when
the error clears.
### For installers: notifications
A fixed tariff beside the price service raises no notification: it is the
@@ -3478,6 +3597,7 @@ default `info` hides it.
| Battery cycle did not finish | warning | `goodwe_maint_failed_<name>` | MAINT-13 |
| No prices | warning | `goodwe_no_prices` | PRICE-01 |
| Charger not reachable | warning | `goodwe_charger_unreachable` | EV-03 |
| Car over the peak limit | info | `goodwe_car_over` | EV-04 |
**The Details link.** Home Assistant 2026.2 and newer show add-on pages at
`/config/app/<slug>/documentation`; 2026.5 removed the old
+880
View File
@@ -0,0 +1,880 @@
"""EV-04 and EV-05: the car charger's Manual and Solar modes, the one place the
add-on WRITES to it.
Pure but for the driver it is handed: no clock of its own (`now` is monotonic
seconds from the caller), no Home Assistant, no store. DECISIONS/EV-04-manual-
mode.md has the record; the design is reports/EV-01-design-report.md sections
2, 3 and 4.
THE RULES, each tested in test_ev04.py:
* Off writes NOTHING. Manual writes the current (6 A to the clamp) and the
phases (1 or 3), each ONCE PER USER CHANGE, and only with a car connected
and not full: with no car, or a full one, the current stands and the write
waits for the car.
* Every current is clamped to `min(ev_max_a, the station limit the charger
reports, the entity's own range)`. The driver refuses anything above it; this
module never asks for more.
* Phases change only through the SAFE SEQUENCE: 0 A, wait until the charger
reports under `QUIET_W` or mode3 leaves C (at most `ZERO_WAIT_S`), select the
phases, wait `SETTLE_S`, write the current again. At most one switch per
`PHASE_GAP_S`. A sequence that has begun is always finished, because it
leaves the car at 0 A otherwise.
* A read-back that differs from the add-on's own last write for `WRITER_S` is
ANOTHER WRITER: an info row, and no write over it until the user changes the
mode or a value again.
* A charger that comes back after being unavailable gets the setting again only
if its read-back differs.
EV-05, SOLAR (`SolarPlan` decides, `SolarWriter` writes; test_ev05.py,
DECISIONS/EV-05-solar-mode.md): the car gets the spare sun, `spare = car +
battery charge - grid import`, less the batteries' room (Batteries first) and
the margin. Whole amps rounded down, at most one write per 30 s and only on a
1 A change. Start after `ev_start_min` of enough sun, hold 6 A for
`ev_pause_min` below it, then 0 A. The peak guard's excess is taken off the
car first, at once. Every way out of Solar leaves the charger at 0 A, written
once. Both writers share `ManualWriter._write`, so there is still one
`write_current` and one `write_phases` call in the add-on.
"""
from __future__ import annotations
import logging
import math
from . import chargers as CH
_LOG = logging.getLogger("goodwe")
OFF, MANUAL, SOLAR = "off", "manual", "solar"
#: the modes offered. Night is a later card (EV-02).
MODES = (OFF, MANUAL, SOLAR)
#: Home Assistant's select labels, English and pinned.
MODE_LABELS = {OFF: "Off", MANUAL: "Manual", SOLAR: "Solar"}
#: EV-05: where the spare sun goes first (`select.goodwe_car_sun_first`).
KEY_FIRST = "car_sun_first"
FIRST_BATT, FIRST_CAR = "batteries", "car"
FIRSTS = (FIRST_BATT, FIRST_CAR)
FIRST_LABELS = {FIRST_BATT: "Batteries", FIRST_CAR: "Car"}
DEFAULT_FIRST = FIRST_BATT
START_KEEP, START_OFF = "keep", "off"
KEY_MODE, KEY_A, KEY_PHASES = "car_mode", "car_current", "car_phases"
DEFAULT_A = 6.0
DEFAULT_PHASES = 1
QUIET_W = 100.0 # "paused": under this, or mode3 has left C
ZERO_WAIT_S = 20.0 # at most this long for the car to stop drawing
SETTLE_S = 10.0 # after the phases select, before the current
PHASE_GAP_S = 600.0 # at most one phase switch per this
WRITER_S = 30.0 # a differing read-back this long is another writer
RETRY_S = 60.0 # a write the charger did not take, tried again after
MAX_TRIES = 3 # ... this many times, then it waits for the user
TOL_A = CH.TOOK_TOL_A
def allowed_phases(opts: dict) -> tuple:
"""The phase counts the user may pick: the `ev_phases` setting says what
the installation allows (`auto` is 1 and 3)."""
v = str((opts or {}).get("ev_phases", CH.EV_OPTION_DEFAULTS["ev_phases"]))
return (1,) if v == "1" else (3,) if v == "3" else (1, 3)
def start_mode(opts: dict, stored) -> str:
"""The mode after a restart: the stored one (`keep`), or Off."""
if str((opts or {}).get("ev_mode_start")
or CH.EV_OPTION_DEFAULTS["ev_mode_start"]) == START_OFF:
return OFF
return stored if stored in MODES else OFF
def clamp_for(opts: dict, reading) -> float | None:
"""The most a write may ask for, from the options and the last reading:
`min(ev_max_a, the station limit, 40 A)`. None when the limit setting is
not a number. (The driver reads the entity's own range as well.)"""
amps = CH.max_a(opts)
if amps is None:
return None
lim = [amps, CH.ENTITY_MAX_A]
st = getattr(reading, "station_a", None)
if st is not None:
lim.append(float(st))
return min(lim)
def value_a(raw, clamp: float | None):
"""A current the user asked for, as a whole number of amps inside
`[6, clamp]`, or None when it is not a number. Above the clamp is the
clamp: the user's value never reaches the driver bigger than it."""
try:
v = float(raw)
except (TypeError, ValueError):
return None
if v != v:
return None
v = round(v)
hi = CH.ENTITY_MAX_A if clamp is None else max(CH.MIN_A, float(clamp))
return float(min(max(v, CH.MIN_A), hi))
class ManualWriter:
"""What Manual does to the charger, one `step()` per cycle."""
def __init__(self):
self.rev_applied = None # the user's last change we have acted on
self.last_a = None # the last current the charger took from us
self.attempted_a = None # a write it did not take ...
self.prior_a = None # ... and what the charger showed before it
self.mismatch_since = None
self.hold = False # another writer: no write until the user
self.other = False # ... and the info row says so
self.reapply = True # first reading, or the charger came back
self.was_available = False
self.fails = 0
self.fail_at = None
self.gave_up = False
self.seq = None # a phase change under way
self.last_switch = None
self.blocked = False # a phase change waits for PHASE_GAP_S
self.would = None # (amps, phases): what it would set
self.log = [] # (kind, value, now, ok), for the checks
self.last_done = None # when our latest write was confirmed
self._clock = None
self.phase_fails = 0 # phase selects the charger did not take
self.phases_gave_up = False
self.undone = 0 # sequences undone before the select
self.phase_done_at = None # EV-15: our phase change ended well then
self.zero_sent_at = None # EV-15: our 0 A write is out, not yet back
# ------------------------------------------------------------------ user
def user_changed(self) -> None:
"""The user changed the mode or a value: one more write is allowed,
and another writer's hold is lifted."""
self.rev_applied = None
self.hold = self.other = False
self.mismatch_since = None
self.fails, self.fail_at, self.gave_up = 0, None, False
self.phase_fails, self.phases_gave_up = 0, False
self.attempted_a = self.prior_a = None
# ------------------------------------------------------------------ step
async def step(self, drv, r, *, mode, want_a, want_phases, rev, clamp,
now, tracker, writing, status, shadow=False, clock=None):
"""One cycle. `r` is the latest `ChargerReading`; `writing` is False in
shadow mode and while control is stopped (the step then only works out
what it WOULD set, in `self.would`)."""
self._clock = clock or (lambda: now)
if r is None or not r.available:
self.was_available = False
return
# A reading taken before our latest write was confirmed says nothing
# about it (the writer runs beside the cycle and can finish between a
# read and the step that follows): wait for one taken after.
if self.last_done is not None and tracker is not None \
and tracker.obs_at is not None \
and tracker.obs_at <= self.last_done:
return
if not self.was_available:
self.was_available = True
self.reapply = True # on return: only if it differs
cur = r.allowed_a if r.allowed_a is not None else r.setpoint_a
if self.seq is not None:
if self.seq["stage"] in ("zero", "select") \
and (mode != MANUAL or not writing):
await self._undo(drv, now, tracker, clamp, shadow)
return
await self._advance(drv, r, cur, now, tracker, want_a, clamp, rev)
return
self.would = None
if mode != MANUAL:
return
if clamp is None or clamp < CH.MIN_A:
return
n_eff = want_phases if want_phases in (1, 3) else DEFAULT_PHASES
target = min(max(float(want_a), CH.MIN_A), float(clamp))
self.would = (target, n_eff)
# No car, or a full one: the current stands, nothing is written. The
# setting waits (rev stays unapplied) until a car is there.
if r.state == "A" or status in (CH.NONE_, CH.FULL):
self.mismatch_since = None
return
if not writing:
return
self._watch(cur, now)
if self.hold:
return
phases_need = (r.phases_allowed is not None
and r.phases_allowed != n_eff
and not self.phases_gave_up)
cur_need = cur is None or abs(cur - target) > TOL_A
need_user = rev != self.rev_applied
if not (phases_need or cur_need):
self.rev_applied, self.reapply = rev, False
self.fails, self.blocked = 0, False
if cur is not None:
self.last_a = cur # adopt what is already set
return
if not (need_user or self.reapply):
return # a difference nobody asked for: `_watch()` judges
if self.gave_up or (self.fail_at is not None
and now - self.fail_at < RETRY_S):
return
if phases_need:
if self.last_switch is not None \
and now - self.last_switch < PHASE_GAP_S:
self.blocked = True
else:
self.blocked = False
await self._begin(drv, r, cur, n_eff, now, tracker)
return
if cur_need:
ok = await self._write(drv, target, cur, now, tracker)
if not ok:
self._failed(now)
return
self.fails, self.fail_at = 0, None
if not phases_need:
self.rev_applied, self.reapply = rev, False
# ------------------------------------------------------------- internals
def _failed(self, now) -> None:
self.fails += 1
self.fail_at = now
if self.fails >= MAX_TRIES:
self.gave_up = True
_LOG.warning("The charger did not take the current, so the add-on "
"stops asking until you change it: CHARGER_REFUSED.")
_LOG.debug("The charger refused the current %d times.", self.fails)
def _watch(self, cur, now) -> None:
"""Is the read-back what we wrote? A difference that stands for
`WRITER_S` is another writer."""
known = [x for x in (self.last_a, self.attempted_a, self.prior_a)
if x is not None]
if not known or cur is None:
self.mismatch_since = None
return
if any(abs(cur - k) <= TOL_A for k in known):
self.mismatch_since = None
if self.hold:
self.hold = self.other = False
return
if self.mismatch_since is None:
self.mismatch_since = now
elif now - self.mismatch_since >= WRITER_S and not self.hold:
self.hold = self.other = True
_LOG.info("Something else changes the charger (read-back %.0f A, "
"the add-on set %.0f A), so the add-on stops writing "
"to it until you change it.", cur, known[0])
async def _write(self, drv, a, was, now, tracker) -> bool:
tracker.begin_write() # EV-12: the read-back is ours
try:
ok = await drv.write_current(a)
finally:
self._stamp(now)
tracker.end_write(self.last_done)
tracker.note_write(now, was, a)
tracker.end_write(self.last_done)
self.log.append(("current", a, now, ok))
if ok:
self.last_a = a
self.attempted_a = self.prior_a = None
else:
self.attempted_a, self.prior_a = a, was
return ok
def _stamp(self, now) -> None:
self.last_done = (self._clock or (lambda: now))()
@staticmethod
def _restore_a(prev, clamp):
"""The current to give back: what it was, never above the clamp."""
if prev is None:
return None
hi = CH.ENTITY_MAX_A if clamp is None else float(clamp)
a = min(float(prev), hi)
return a if a >= CH.MIN_A else None
async def _undo(self, drv, now, tracker, clamp, shadow) -> None:
"""Off, shadow mode or a stopped control while the car is paused and the
phases have NOT been selected: no switch. The old current comes back
(clamped), in shadow mode too: it undoes the add-on's own half-done
change (as the shutdown restore does) and is the one write shadow mode
allows. Nothing else is written afterwards."""
q, self.seq = self.seq, None
self.undone += 1
self.rev_applied, self.reapply = None, True
a = self._restore_a(q.get("prev"), clamp)
if a is not None:
await self._write(drv, a, 0.0, now, tracker)
async def _begin(self, drv, r, cur, n, now, tracker) -> None:
"""Step 1 of the safe sequence: 0 A. A charger that does not take it
stops the sequence before the phases are touched."""
self.phase_done_at = None
# EV-15: the car stops while the write waits for its read-back, and the
# cycle runs beside it: the window opens when the write is SENT.
self.zero_sent_at = now
try:
ok = await self._write(drv, 0.0, cur, now, tracker)
finally:
self.zero_sent_at = None
if not ok:
self._failed(now)
return
self.seq = {"stage": "zero", "t0": now, "n": n, "tries": 0,
"prev": cur}
async def abandon(self, drv, now, tracker, clamp=None) -> None:
"""The add-on is stopping in the middle of a phase change: give the car
its current back (a stopped add-on must not leave it at 0 A), clamped
like every write. The phases stay as the select left them."""
q, self.seq = self.seq, None
a = None if q is None else self._restore_a(q.get("prev"), clamp)
if a is not None:
self._clock = self._clock or (lambda: now)
await self._write(drv, a, 0.0, now, tracker)
async def _advance(self, drv, r, cur, now, tracker, want_a, clamp, rev):
q = self.seq
if q["stage"] in ("zero", "select") and cur is not None \
and cur >= CH.MIN_A:
# Something else raised the current while the car was being
# paused. The phases are never selected under that: give up the
# change, and leave the charger to whoever set it until the user
# changes something.
self.seq = None
self.hold = self.other = True
self.last_a = self.attempted_a = self.prior_a = None
_LOG.info("Something else raised the charger's current during a "
"phase change, so the phases were not touched.")
return
if q["stage"] == "zero":
quiet = ((r.power_w is not None and r.power_w < QUIET_W)
or (r.state is not None and r.state != "C"))
if not quiet and now - q["t0"] < ZERO_WAIT_S:
return
q["stage"] = "select"
if q["stage"] == "select":
ok = await drv.write_phases(q["n"])
self._stamp(now)
self.last_switch = now
self.log.append(("phases", q["n"], now, ok))
q["stage"], q["t1"] = "settle", self.last_done # from its return
if not ok:
q["failed"] = True # EV-15: no grace for the alarm
# The charger did not take it: the car gets its current back
# on the old phases after the same SETTLE_S as a taken select
# (HA may have taken it and only the read-back be late), and
# the change is tried again after PHASE_GAP_S, MAX_TRIES times.
self.phase_fails += 1
if self.phase_fails >= MAX_TRIES:
self.phases_gave_up = True
_LOG.warning("The charger did not take the phases, so the "
"add-on stops trying until you change "
"something: CHARGER_PHASES.")
return
if now - q["t1"] < SETTLE_S:
return
hi = CH.ENTITY_MAX_A if clamp is None else float(clamp)
a = min(max(float(want_a), CH.MIN_A), hi)
if await self._write(drv, a, 0.0, now, tracker):
# Judged afresh next cycle: a value the user changed meanwhile is
# still wanted, and one that is in place is adopted.
self.seq, self.rev_applied, self.reapply = None, None, False
self.fails, self.blocked = 0, False
if not q.get("failed"):
self.phase_done_at = self.last_done # EV-15
return
q["failed"] = True # EV-15: a refused write ends it
q["tries"] += 1
if q["tries"] >= MAX_TRIES:
# Left at 0 A is the safe side; the next reading re-applies.
self.seq, self.last_a, self.reapply = None, None, True
self._failed(now)
self.rev_applied = None
return
q["t1"] = now - SETTLE_S + 5.0 # again in 5 s
# =========================================================================== #
# EV-05: Solar. `SolarPlan` decides what the car should get, `SolarWriter`
# makes the charger match it through ManualWriter's one write site.
# =========================================================================== #
MIN_A = CH.MIN_A
VOLTS = 230.0 # per phase: the amps a figure in watts is worth
SOLAR_WRITE_S = 30.0 # at most one current change per this
SOLAR_STEP_A = 1.0 # ... and only on a change of this or more
UP_W, UP_S = 4500.0, 180.0 # auto phases: to 3 at this for this long
DOWN_W, DOWN_S = 4000.0, 300.0 # ... back to 1 under this for this long
ONE_PHASE_S = 10.0 # one phase drawing while 3 are allowed this long
ONE_PHASE_MIN_W = 500.0 # ... with the car drawing at least this
def _num(v):
try:
f = float(v)
except (TypeError, ValueError):
return None
return f if math.isfinite(f) else None
def spare_w(car_w, batt_w, grid_w):
"""The spare sun, signed and not clipped: what the car takes, plus what the
batteries charge, less what the grid gives. `batt_w` is the add-on's own
battery figure (discharge positive) and `grid_w` the meter (import
positive), so this is `car - batt - grid` = solar production less the
house. A grid charge of the batteries, or batteries giving more than the
house uses, is never spare sun. None when a figure is missing or not a
number."""
c, b, g = _num(car_w), _num(batt_w), _num(grid_w)
if c is None or b is None or g is None:
return None
return c - b - g
def car_target_w(spare, room_w, margin_w, first):
"""What the car may take: Batteries first `spare - room - margin`, Car
first `spare - margin`. None while the spare is unknown."""
s = _num(spare)
if s is None:
return None
room = float(room_w or 0.0) if first == FIRST_BATT else 0.0
return s - room - float(margin_w)
def amps_for(car_w, n, clamp=None):
"""Whole amps for `car_w` on `n` phases, ROUNDED DOWN, never above the
clamp. None for a figure that is not a number."""
w = _num(car_w)
if w is None or n not in (1, 3):
return None
a = math.floor(w / (VOLTS * n) + 1e-9)
hi = CH.ENTITY_MAX_A if _num(clamp) is None else float(clamp)
return float(max(0, min(a, math.floor(hi))))
def solar_option(opts: dict, key: str) -> float:
"""`ev_margin_w`, `ev_pause_min` or `ev_start_min` as a number, the shipped
default when it is not one (the validator refuses it anyway)."""
v = _num((opts or {}).get(key))
return float(CH.EV_OPTION_DEFAULTS[key]) if v is None else v
class SunInputs:
"""One cycle's inputs for Solar, built by the Controller."""
def __init__(self, target_w=None, hold=False, cut_w=0.0, car_w=None,
key=None, auto=True, fixed_n=1, start_s=120.0,
pause_s=300.0, spare_w=None, room_w=0.0, margin_w=100.0,
first=DEFAULT_FIRST):
self.target_w, self.hold, self.cut_w = target_w, hold, cut_w
self.car_w, self.key, self.auto, self.fixed_n = car_w, key, auto, \
fixed_n
self.start_s, self.pause_s = start_s, pause_s
self.spare_w, self.room_w, self.margin_w = spare_w, room_w, margin_w
self.first = first
class SolarPlan:
"""What Solar wants set, one `step()` per cycle. Pure: monotonic `now` from
the caller and no driver, so in shadow mode it runs the same and the card
says what it would set. `a` is the current wanted (0: paused), `n` the
phases it is meant for."""
def __init__(self, n=1):
self.reset(n)
def reset(self, n=1, why="paused"):
self.a = 0.0
self.n = n if n in (1, 3) else 1
self.set_at = None # when `a` last changed (the 30 s rule)
self.ok_since = None # enough sun to start, since
self.low_since = None # under 6 A worth, holding 6 A, since
self.unknown_since = None # the spare cannot be measured, since
self.up_since = self.down_since = None
self.cap_a = self.cap_key = None # the peak cut, for this period
self.why = self.pause_why = why
self.target_w = None
def _pause(self, why):
self.a, self.set_at = 0.0, None
self.ok_since = self.low_since = self.unknown_since = None
self.up_since = self.down_since = None
self.why = self.pause_why = why
def _gate(self, now) -> bool:
return self.set_at is None or now - self.set_at >= SOLAR_WRITE_S
def _switch(self, n, target_w, now, clamp):
self.n = n
a = amps_for(target_w, n, clamp) or 0.0
if a >= MIN_A:
self.low_since = None
elif self.low_since is None:
self.low_since = now
a = max(a, MIN_A)
if self.cap_a is not None:
a = max(MIN_A, min(a, self.cap_a))
self.a, self.set_at = a, now
self.up_since = self.down_since = None
self.why = "running"
def step(self, now, *, target_w, n_calc, auto, fixed_n, clamp,
start_s, pause_s, hold=False, cut_w=0.0, car_w=None, key=None,
gap_ok=True):
if key != self.cap_key:
self.cap_a = self.cap_key = None
if hold: # readings late, under the stale bound
return
self.target_w = target_w
# The peak guard's excess comes off the car first, at once (no 30 s
# rule, no hold). Nothing starts while the period heads over the aim.
if cut_w and cut_w > 0.0:
self.ok_since = None
if self.a > 0.0:
base = self.a * VOLTS * n_calc
cw = _num(car_w)
if cw is not None:
base = min(base, cw)
new = amps_for(base - float(cut_w), n_calc, clamp)
if new is None or new < MIN_A:
self._pause("cut")
elif new < self.a:
self.a, self.set_at, self.why = new, now, "cut"
self.cap_a, self.cap_key = new, key
return
if target_w is None: # the sun cannot be measured: hold, then 0 A
self.ok_since = None
if self.a > 0.0:
if self.unknown_since is None:
self.unknown_since = now
if now - self.unknown_since >= pause_s:
self._pause("unknown")
else:
self.why = "unknown"
return
self.unknown_since = None
hi = None if _num(clamp) is None else math.floor(float(clamp))
if self.a <= 0.0: # paused: the start rule
n0 = 1 if auto else fixed_n
if target_w >= (MIN_A + 1.0) * VOLTS * n0:
if self.ok_since is None:
self.ok_since = now
self.why = "start"
if now - self.ok_since >= start_s:
a = amps_for(target_w, n0, clamp)
if a is not None and self.cap_a is not None:
a = min(a, self.cap_a)
if a is not None and a >= MIN_A:
self.a, self.n, self.set_at = a, n0, now
self.ok_since = self.low_since = None
self.up_since = self.down_since = None
self.why = "running"
else:
self.ok_since = None
self.why = self.pause_why
return
if hi is not None and self.a > hi: # the clamp came down
if hi < MIN_A:
self._pause("paused")
return
self.a, self.set_at = float(hi), now
if auto: # auto phases, by their own dwells
if self.n == 1:
self.down_since = None
if target_w >= UP_W:
self.up_since = self.up_since if self.up_since is not None \
else now
else:
self.up_since = None
if self.up_since is not None and now - self.up_since >= UP_S \
and gap_ok and self._gate(now):
self._switch(3, target_w, now, clamp)
return
else:
self.up_since = None
if target_w < DOWN_W:
self.down_since = self.down_since \
if self.down_since is not None else now
else:
self.down_since = None
if self.down_since is not None \
and now - self.down_since >= DOWN_S and gap_ok and self._gate(now):
self._switch(1, target_w, now, clamp)
return
want = amps_for(target_w, n_calc, clamp)
if want is not None and want >= MIN_A:
self.low_since = None
if self.cap_a is not None:
want = min(want, self.cap_a)
self.why = "running"
if abs(want - self.a) >= SOLAR_STEP_A and self._gate(now):
self.a, self.set_at = want, now
return
if auto and self.n == 3 and target_w >= DOWN_W:
# Inside the phase hysteresis (4.0 kW to 6 A x 690 W): 3 phases at
# 6 A stand, as the switch rule says; no pause count.
self.low_since = None
self.why = "running"
if self.a != MIN_A and self._gate(now):
self.a, self.set_at = MIN_A, now
return
if self.low_since is None:
self.low_since = now
self.why = "hold"
if now - self.low_since >= pause_s:
self._pause("paused")
return
if self.a != MIN_A and self._gate(now):
self.a, self.set_at = MIN_A, now
class SolarWriter(ManualWriter):
"""What Solar does to the charger, one `step()` per cycle. It shares
ManualWriter's write, phase sequence and other-writer watch; what differs
is that every way out ends at 0 A, written once, and that an interrupted
phase change is never undone to the old current."""
def __init__(self):
super().__init__()
self.plan = SolarPlan()
self.engaged = False # Solar has run since it was chosen
self.reinit = True # start again from 0 A and the start rule
self.out = False # not writing: the 0 A has been tried
self.stand = False # no car: the standing 0 A has been tried
self.fault = None # "error" | "stuck" while it holds
self.fault_done = False
self.warned = False # the charger error warning, once
self.single = False # a one-phase car on a 3-phase allowance
self._one_since = None
self.zero_at = None # EV-15: our own latest 0 A, sent then
self.sent_a = None # the current we last decided to write
# ------------------------------------------------------------------ help
def _mark(self, r, now) -> None:
"""A car that draws one phase while 3 are allowed is a one-phase car
for the session: the sun arithmetic then uses 1 phase."""
if r.state == "A":
self.single, self._one_since = False, None
return
drawing = [x for x in (r.current_a or ()) if x >= CH.IDLE_A]
one = (r.phases_allowed == 3 and r.charging is True
and r.power_w is not None and r.power_w >= ONE_PHASE_MIN_W
and len(r.current_a or ()) >= 3 and len(drawing) == 1)
if not one:
self._one_since = None
return
if self._one_since is None:
self._one_since = now
if now - self._one_since >= ONE_PHASE_S and not self.single:
self.single = True
_LOG.info("The car draws one phase while three are allowed, so "
"the add-on counts one phase for this charge.")
def _watch(self, cur, now) -> None:
"""As Manual's, and in Solar the hold is a warning: the add-on stops
writing until you press the mode or the read-back matches again."""
was = self.hold
super()._watch(cur, now)
if self.hold and not was:
_LOG.warning("Something else changes the charger, so the add-on "
"stops writing to it: CHARGER_OTHER.")
@property
def n_calc(self) -> int:
return 1 if self.single else self.plan.n
def amps_out(self, clamp) -> float:
"""The plan's current, never above the clamp; 0 when under 6 A."""
a = float(self.plan.a)
if _num(clamp) is not None:
a = min(a, float(math.floor(float(clamp))))
return a if a >= CH.MIN_A else 0.0
def user_changed(self) -> None:
"""As Manual's, and Solar says its current again (another writer's
hold is lifted by pressing the mode)."""
super().user_changed()
self.sent_a = None
async def _zero_once(self, drv, cur, now, tracker, force=False) -> None:
"""One try of 0 A on the way out. Never over another writer, and not
when the charger already shows 0 A (unless the reading is stuck, so
its 0 A means nothing: `force`)."""
if self.hold or (not force and cur is not None and cur <= TOL_A):
return
self.zero_at, self.sent_a = now, 0.0
await self._write(drv, 0.0, cur, now, tracker)
def _leave(self) -> None:
self.engaged, self.seq, self.would = False, None, None
self.out = self.stand = False
self.fault, self.fault_done = None, False
self.reinit = True
self.sent_a = None
self.plan.reset(self.plan.n)
def _plan_step(self, sun, now, clamp) -> None:
gap = self.last_switch is None or now - self.last_switch >= PHASE_GAP_S
self.plan.step(
now, target_w=sun.target_w, hold=sun.hold, n_calc=self.n_calc,
auto=sun.auto and not self.single,
fixed_n=1 if self.single else sun.fixed_n, clamp=clamp,
cut_w=sun.cut_w, car_w=sun.car_w, key=sun.key,
start_s=sun.start_s, pause_s=sun.pause_s,
gap_ok=gap and not self.phases_gave_up)
# ------------------------------------------------------------------ step
async def step(self, drv, r, *, mode, sun, clamp, now, tracker, writing,
status, clock=None):
"""One cycle. `sun` is `SunInputs`; `writing` is False in shadow mode,
while control is stopped, under a safety stop and while stopping."""
self._clock = clock or (lambda: now)
if r is None or not r.available:
self.was_available = False # nothing is tried while it is down
return
if self.last_done is not None and tracker is not None \
and tracker.obs_at is not None \
and tracker.obs_at <= self.last_done:
return
self._mark(r, now)
if not self.was_available:
self.was_available = True
self.reinit = True # back: 0 A first, then the rules
cur = r.allowed_a if r.allowed_a is not None else r.setpoint_a
if mode != SOLAR:
self.would = None
if not self.engaged:
return
if mode != MANUAL: # Off: 0 A once, then nothing
self.seq = None
await self._zero_once(drv, cur, now, tracker)
self._leave() # Manual writes its own current
return
self.engaged = True
if sun is None:
return
if not writing:
# Shadow, Stop, a safety stop, stopping: 0 A once, then nothing.
# The plan goes on, so the card says what it would set.
self.seq = None
if not self.out:
self.out = True
await self._zero_once(drv, cur, now, tracker)
self._plan_step(sun, now, clamp)
self.would = (self.amps_out(clamp), self.n_calc)
self.reinit = True
return
self.out = False
self.would = None
fault = ("error" if (r.error or r.state in ("E", "F")) else
"stuck" if tracker is not None and tracker.stuck(now)
else None)
if fault is not None:
# 0 A once, then no write until it clears; then the start rule.
self.seq = None
if self.fault != fault:
self.fault, self.fault_done = fault, False
if fault == "error" and not self.warned:
self.warned = True
_LOG.warning("The charger reports an error, so the add-on "
"sets the car to 0 A: CHARGER_ERROR.")
if not self.fault_done:
self.fault_done = True
await self._zero_once(drv, cur, now, tracker,
force=fault == "stuck")
self.plan.reset(self.plan.n, why=fault)
self.reinit = True
return
if self.fault is not None:
self.fault, self.fault_done = None, False
self.warned = False
if r.state == "A" or status == CH.NONE_:
# No car: the standing current is 0 A, written once.
self.seq = None
if not self.stand:
self.stand = True
await self._zero_once(drv, cur, now, tracker)
self.plan.reset(self.plan.n, why="none")
self.reinit = False
return
self.stand = False
if self.reinit:
self.reinit = False
self.seq = None
self.mismatch_since = None
self.sent_a = None
n = r.phases_allowed if r.phases_allowed in (1, 3) else self.plan.n
self.plan.reset(n)
if status == CH.FULL: # the car is full: nothing written
self.plan.why = "full"
return
if self.seq is None:
self._watch(cur, now)
if self.hold:
return
self._plan_step(sun, now, clamp)
if self.seq is not None:
q = self.seq
if self.plan.a < CH.MIN_A:
self.seq = None # paused or cut: it stays at 0 A
return
pf = self.phase_fails
await self._advance(drv, r, cur, now, tracker, self.amps_out(clamp)
or CH.MIN_A, clamp, None)
if self.phase_fails > pf and q.get("from") in (1, 3):
self.plan.n = q["from"] # the select was not taken
if self.seq is None:
self.sent_a = self.last_a
return
want = self.amps_out(clamp)
if want >= CH.MIN_A and not self.single and not self.phases_gave_up \
and r.phases_allowed in (1, 3) \
and r.phases_allowed != self.plan.n:
if self.last_switch is not None \
and now - self.last_switch < PHASE_GAP_S:
self.blocked = True
return
self.blocked = False
self.zero_at, self.sent_a = now, 0.0
await self._begin(drv, r, cur, self.plan.n, now, tracker)
if self.seq is not None:
self.seq["from"] = r.phases_allowed
return
if self.sent_a is not None and abs(self.sent_a - want) <= TOL_A \
and self.fail_at is None:
return # nothing new: a read-back that differs is `_watch`'s
if cur is not None and abs(cur - want) <= TOL_A:
self.sent_a = want
self.fails, self.fail_at = 0, None
if self.last_a is None or abs(self.last_a - cur) > TOL_A:
self.last_a = cur
return
if self.gave_up or (self.fail_at is not None
and now - self.fail_at < RETRY_S):
return
if want <= 0.0:
self.zero_at = now
self.sent_a = want
if await self._write(drv, want, cur, now, tracker):
self.fails, self.fail_at = 0, None
else:
self._failed(now)
async def release(self, drv, r, now, tracker) -> None:
"""The add-on stops in Solar: 0 A, once, before the inverters go to
0 W. A phase change in the middle is not undone to the old current."""
self.seq = None
if r is not None and r.available:
cur = r.allowed_a if r.allowed_a is not None else r.setpoint_a
else:
cur = None
if self.last_done is not None and tracker is not None \
and tracker.obs_at is not None \
and tracker.obs_at <= self.last_done:
cur = self.last_a # the reading predates our own write
self._clock = self._clock or (lambda: now)
await self._zero_once(drv, cur, now, tracker)
self.out = True
+255 -18
View File
@@ -5,10 +5,12 @@ actuator per site, a census key, a read, a clamped write that says whether the
charger took it, and a hand-back. A charger is a modulated actuator with a fail
state, not one of DEV-01's on/off loads.
THIS CARD NEVER WRITES TO THE CHARGER. `write_current`, `write_phases` and
`release` are defined so the seam is whole, and NOTHING in the controller calls
them: Off is the only mode. test_ev03.py greps the controller for a call and
proves a full cycle makes no service call that names a charger entity.
EV-04 IS THE FIRST CARD THAT WRITES TO THE CHARGER, in Manual and (EV-05) in
Solar (`app/carmode.py` is the one caller). `write_current` is clamped to
`min(ev_max_a, the station limit the charger reports, the entity's own range)`
and a value above that is NEVER SENT: it is a software fault, logged in the
OUTPUT_CLAMP shape. It says True only when the charger's read-back followed
within `TOOK_S`. Off writes nothing (EV-03's no-write test still holds for it).
VALUES ARE BELIEVED ONLY IN THEIR OWN UNIT (as TEL-11 does for power): power in
a power unit, energy in a kWh unit, current in A. A reading in another unit is
@@ -20,12 +22,17 @@ as an argument, so the checks need no sleep.
from __future__ import annotations
import asyncio
import logging
import re
from dataclasses import dataclass
import time
from dataclasses import dataclass, field
from .hass import BAD_STATES
from .solarfc import KWH_PER
_LOG = logging.getLogger("goodwe")
OFF = "off"
ALFEN_HA = "alfen_ha"
#: the `ev_charger` values the options accept
@@ -34,7 +41,14 @@ PHASES_CHOICES = ("1", "3", "auto")
# config.yaml's shipped defaults, mirrored (test_defaults_pin.py checks it).
EV_OPTION_DEFAULTS = {"ev_charger": "off", "ev_current_entity": "",
"ev_max_a": 16, "ev_phases": "auto"}
"ev_max_a": 16, "ev_phases": "auto",
"ev_batt_cover": True, "ev_mode_start": "keep",
# EV-05, Solar: the sun kept back, and the two dwells
"ev_margin_w": 100, "ev_pause_min": 5,
"ev_start_min": 2}
#: EV-05: the ranges config.yaml's schema and the validator both hold.
SOLAR_RANGES = {"ev_margin_w": (0, 1000), "ev_pause_min": (1, 30),
"ev_start_min": (1, 30)}
def max_a(opts: dict):
@@ -58,6 +72,31 @@ FULL_C_S = 600.0 # mode3 C under FULL_C_W this long: car full
FULL_C_W = 200.0
WRITER_HOLD_S = 3600.0 # "another controller" stays shown this long
IDLE_A = 1.0 # a phase under this draws nothing
TOOK_S = 10.0 # a write is "taken" when the read-back follows by then
TOOK_TOL_A = 0.5 # ... to within this
STUCK_S = 60.0 # EV-04: power and read-back unchanged after a write
STUCK_MIN_A = 1.0 # ... that moved the setpoint by at least this
OWN_WRITE_MUTE_S = 15.0 # the tracker's two-writer detector ignores our own
# Volts used to bound a car figure by what the read-back allows (a physical
# ceiling for the alarm path, never a setpoint).
CEILING_V = 253.0
# EV-04 round 2: the car's power may be used by the peak guard's alarm path only
# while the charger's energy meter CORROBORATES it. Looking back over readings
# (all in mode3 C, no gap) to the shortest stretch that is at least CORR_WINDOW_S
# long AND over which the reported power adds up to at least CORR_MIN_WH, the
# meter must have advanced by at least CORR_RATIO of that, less CORR_SLACK_WH (the
# meter shows 10 Wh steps, so at 40 Wh expected it must show one step). Readings
# are kept for CORR_KEEP_S. Until such a stretch exists (a session just began, or
# the add-on just started) the figure is believed, as it was before. A frozen
# figure of P watts on a car that has really stopped is caught within
# max(CORR_WINDOW_S, CORR_MIN_WH / P) seconds: 60 s at 2.4 kW and up, 104 s at
# 1.38 kW (6 A, 1 phase). Below CORR_MIN_WH over CORR_KEEP_S (about 0.8 kW) the
# figure is believed; it cannot hide an overload that matters.
CORR_WINDOW_S = 60.0
CORR_RATIO = 0.5
CORR_SLACK_WH = 15.0
CORR_MIN_WH = 40.0
CORR_KEEP_S = 180.0
# role -> (entity domain, suffix after `<x>_`). `current` is the setpoint, the
# one the installer names; the rest are derived by swapping its suffix.
@@ -350,7 +389,12 @@ class ChargerDriver:
async def read(self) -> ChargerReading:
raise NotImplementedError
# --- the write side. DEFINED, UNUSED BY THE CONTROLLER IN THIS CARD. ----
# --- the write side (EV-04). `app/carmode.py` is the one caller. ---------
async def clamp_a(self) -> float:
"""The most a write may ask for: `min(ev_max_a, the station limit read
from the charger, the entity's own range max)`."""
raise NotImplementedError
async def write_current(self, a: float) -> bool:
raise NotImplementedError
@@ -376,6 +420,12 @@ class AlfenHaDriver(ChargerDriver):
self._ents = entities_for(self.current_entity)
self._hass = None
self._getter = None
# Seams for the checks: how a write waits for the read-back, and the
# clock it counts on.
self._sleep = asyncio.sleep
self._clock = time.monotonic
self.clamp_faults = [] # (asked, clamp), newest last, for the log
self.sent = [] # every number value actually sent
@classmethod
def from_options(cls, opts: dict) -> "AlfenHaDriver":
@@ -414,7 +464,6 @@ class AlfenHaDriver(ChargerDriver):
return dict(self._ents)
async def _states(self, roles=_ROLE_ORDER) -> dict:
import asyncio
hass = self._h()
got = await asyncio.gather(*(hass.state(self._ents[r]) for r in roles))
return dict(zip(roles, got))
@@ -434,20 +483,86 @@ class AlfenHaDriver(ChargerDriver):
by_ent = {self._ents[r]: o for r, o in st.items()}
return probe_from(self.current_entity, by_ent.get)
# --- the write side, UNUSED in EV-03 --------------------------------------
# --- the write side -------------------------------------------------------
async def clamp_a(self) -> float:
"""`min(ev_max_a, station limit, entity range max)`. A limit the charger
did not answer is not a limit (the other two still bound the write)."""
st = await self._states(("current", "station", "station_active"))
station = _first(_amps(st["station_active"]), _amps(st["station"]))
rng = ENTITY_MAX_A
attrs = (st["current"] or {}).get("attributes") \
if isinstance(st.get("current"), dict) else None
if isinstance(attrs, dict):
try:
rng = min(rng, float(attrs["max"]))
except (KeyError, TypeError, ValueError):
pass
return min(x for x in (self.max_a, station, rng) if x is not None)
async def write_current(self, a: float) -> bool:
a = max(0.0, min(float(a), self.max_a, ENTITY_MAX_A))
return await self._h().set_number(self.current_entity, a)
"""Set the current, once. True only when the charger took it: the
read-back followed within `TOOK_S`. A value above `clamp_a()` is a
SOFTWARE FAULT: nothing is sent, it is logged (the clamp watchdog's
shape) and the answer is False."""
try:
a = float(a)
except (TypeError, ValueError):
a = float("nan")
clamp = await self.clamp_a()
if a != a or a < 0.0 or a > clamp + 1e-9:
self.clamp_faults.append((a, clamp))
del self.clamp_faults[:-20]
_LOG.error("Software fault: the add-on was about to ask the charger "
"for more than its limit, so nothing was sent: "
"CHARGER_CLAMP.")
_LOG.debug("Asked for %.1f A against a limit of %.1f A.", a, clamp)
return False
hass = self._h()
self.sent.append(a)
del self.sent[:-50]
if not await hass.set_number(self.current_entity, a):
return False
return await self._took(a)
async def _took(self, a: float) -> bool:
"""Did the read-back follow the write, within `TOOK_S`?"""
t0 = self._clock()
while True:
st = await self._states(("readback", "current"))
seen = _first(_amps(st["readback"]), _amps(st["current"]))
if seen is not None and abs(seen - a) <= TOOK_TOL_A:
return True
if self._clock() - t0 >= TOOK_S:
return False
await self._sleep(1.0)
async def write_phases(self, n: int) -> bool:
"""Select 1 or 3 phases. ONLY THROUGH `carmode`'s safe sequence: the
setting moves the contactors, so it is touched with the car paused."""
if n not in (1, 3):
return False
return await self._h().call("select", "select_option", {
"entity_id": self._ents["phases_set"],
"option": "1 Phase" if n == 1 else "3 Phases"})
want = "1 Phase" if n == 1 else "3 Phases"
if not await self._h().call("select", "select_option", {
"entity_id": self._ents["phases_set"], "option": want}):
return False
t0 = self._clock()
while True:
st = await self._states(("phases_read", "phases_set"))
seen = _phases(st["phases_read"])
if seen is None:
seen = _phases(st["phases_set"])
if seen == n:
return True
if self._clock() - t0 >= TOOK_S:
return False
await self._sleep(1.0)
async def release(self, mode: str) -> bool:
return await self.write_current(0.0) if mode == "solar" else True
"""The mode's fail state. Manual and Off keep the current (the charger
is a stand-alone device and the current is the user's setting). Solar's
0 A goes through `carmode` (`SolarWriter.release`), the one write
site, so nothing is written here."""
return True
class UnavailableCharger(ChargerDriver):
@@ -473,6 +588,9 @@ class UnavailableCharger(ChargerDriver):
async def limits(self) -> tuple:
return None, None, None
async def clamp_a(self) -> float:
return 0.0
async def read(self) -> ChargerReading:
return ChargerReading(why=self.why)
@@ -546,6 +664,14 @@ class CarTracker:
c_low_since: float | None = None
writer_at_utc: object = None
_prev: tuple | None = None
# EV-04: our own writes, and the stuck-reading rule (SAFETY-37's shape)
mute_until: float = 0.0
armed_at: float | None = None
armed_sig: tuple | None = None
sig: tuple | None = None
stuck_now: bool = False
obs_at: float | None = None # monotonic second of the latest reading
_hist: list = field(default_factory=list) # (t, power W, energy Wh)
# today's energy
day: str | None = None
today_kwh: float | None = None
@@ -554,6 +680,8 @@ class CarTracker:
def observe(self, r: ChargerReading, now: float, now_utc, day: str):
self.reading = r
self.obs_at = now
self._corr_note(r, now)
usable = r.available and r.power_w is not None
if r.available:
self.bad_since = None
@@ -564,7 +692,8 @@ class CarTracker:
self.last_ok = now
self.last_good, self.last_good_utc = r, now_utc
if r.available:
self._writer(r, now_utc)
self._sig(r, now)
self._writer(r, now_utc, now)
self._energy(r, day)
self._timers(r, now)
self._status_edge(now, now_utc)
@@ -594,11 +723,119 @@ class CarTracker:
except (TypeError, ValueError):
return None
# -- EV-04: the stuck-reading rule -------------------------------------------
def begin_write(self) -> None:
"""EV-12: a write of ours is in flight. Its read-back can reach the
tracker before `note_write` runs (the write waits for it), so the mute
is open until `end_write`."""
self.mute_until = float("inf")
def end_write(self, now: float) -> None:
"""EV-12: the write returned (or failed). The mute runs
`OWN_WRITE_MUTE_S` from now, not from before the write."""
self.mute_until = now + OWN_WRITE_MUTE_S
def note_write(self, now: float, was_a, to_a) -> None:
"""The add-on wrote the current. Its own change is not "another
writer" for `OWN_WRITE_MUTE_S`, and a write that moved the setpoint by
`STUCK_MIN_A` or more arms the stuck check: power and read-back that
have not changed `STUCK_S` later are a stuck reading, not a car."""
self.mute_until = now + OWN_WRITE_MUTE_S
try:
moved = was_a is None or abs(float(to_a) - float(was_a)) \
>= STUCK_MIN_A
except (TypeError, ValueError):
moved = False
if moved and self.armed_at is None:
self.armed_at, self.armed_sig = now, self.sig
def _sig(self, r, now: float) -> None:
sig = (r.power_w, r.allowed_a)
if self.armed_at is not None and self.armed_sig is not None \
and sig != self.armed_sig:
self.armed_at = self.armed_sig = None # it moved: alive
self.stuck_now = False
elif self.armed_at is not None and self.armed_sig is None:
self.armed_sig = sig
self.sig = sig
if self.armed_at is not None and now - self.armed_at >= STUCK_S:
self.stuck_now = True
def _corr_note(self, r, now: float) -> None:
"""Keep the last `CORR_WINDOW_S` of (power, energy) while the charger is
charging. Any gap, a car that is not in mode3 C, a reading without
power or energy, or a meter that goes back starts the window again."""
h = self._hist
ok = (r.available and r.charging is True and r.power_w is not None
and r.energy_kwh is not None)
if not ok or (h and r.energy_kwh * 1000.0 < h[-1][2] - 0.5):
h.clear()
if not ok:
return
h.append((now, float(r.power_w), r.energy_kwh * 1000.0))
while len(h) > 2 and now - h[1][0] >= CORR_KEEP_S:
h.pop(0)
def corroborated(self, now: float) -> bool:
"""Does the charger's energy meter agree with the power it reports? No
energy entity, or not charging: no. Less than a window of readings: yes
(the first minute of a session is believed). Otherwise the energy the
meter gained over the window must be at least `CORR_RATIO` of what the
power adds up to, less `CORR_SLACK_WH`. A frozen power figure on a car
that has stopped fails this within a window, and so does everything
frozen together."""
r = self.reading
h = self._hist
if r is None or not r.available or r.charging is not True \
or r.energy_kwh is None or not h:
return False
exp_wh = 0.0
for k in range(len(h) - 1, 0, -1):
(t0, p0, e0), (t1, _p1, _e1) = h[k - 1], h[k]
exp_wh += p0 * (t1 - t0) / 3600.0
if h[-1][0] - t0 >= CORR_WINDOW_S - 5.0 and exp_wh >= CORR_MIN_WH:
got_wh = h[-1][2] - e0
return got_wh >= CORR_RATIO * exp_wh - CORR_SLACK_WH
return True
def stuck(self, now: float) -> bool:
"""Power and read-back unchanged `STUCK_S` after a write that moved the
setpoint. Cleared the moment either moves."""
return self.stuck_now
def car_w_trusted(self, now: float):
"""The car's power for the peak guard's ALARM PATH, or None. Fresh (the
EV-03 rules), not stuck after a write, corroborated by the energy meter
(`corroborated`), and never above what the read-back allows the car to
draw: an old or frozen figure must not hide a house overload."""
return self._capped_w(now, True)
def car_w_paused(self, now: float):
"""EV-15: the same figure as `car_w_trusted` without the energy-meter
corroboration, which a car held at 0 A by the add-on's own phase change
cannot give (the meter's window restarts when it stops charging). Fresh,
not stuck, and capped by the read-back. Only for grading the alarm
during that sequence (`ctl_car._car_own_pause`)."""
return self._capped_w(now, False)
def _capped_w(self, now: float, corroborate: bool):
w = self.car_w(now)
if w is None or self.stuck(now) \
or (corroborate and not self.corroborated(now)):
return None
r = self.reading
a = r.allowed_a if r.allowed_a is not None else r.setpoint_a
if a is not None:
n = r.phases_allowed if r.phases_allowed in (1, 3) else 3
w = min(w, max(0.0, float(a)) * CEILING_V * n)
return w
# -- the two-writer detector ----------------------------------------------
def _writer(self, r, now_utc):
def _writer(self, r, now_utc, now=None):
cur = (r.setpoint_a, r.allowed_a)
prev = self._prev
if prev is not None:
muted = now is not None and now < self.mute_until
if prev is not None and not muted:
for a, b in zip(prev, cur):
if a is not None and b is not None and a != b:
self.writer_at_utc = now_utc
+5 -1
View File
@@ -233,6 +233,9 @@ class AlarmsMixin:
# persistent overload is still notified once per quarter.
high = bool(
g is not None and g.saturated and p is not None
# EV-04: not when the car you set explains the excess (a fresh,
# trusted car reading only; `ctl_car.car_cycle`).
and not getattr(self, "car_explains", False)
and p.block_start is not None and not self._peak_rolled
and peakguard.load_too_high(
p, batt_w=batt, ceiling_w=g.ceiling_w,
@@ -276,7 +279,8 @@ class AlarmsMixin:
the floor binds this guard only; the loop has no SoC floor and goes on
discharging. Edge-triggered. (DECISIONS/MAIN-orchestration-archive.md)"""
g = self.peak_guard
limited = bool(g is not None and g.floor_limited)
limited = bool(g is not None and g.floor_limited
and not getattr(self, "car_explains", False))
if limited and (g.floor_w or 0.0) > 0.0:
limited = self._reserve_short(g)
else:
+690
View File
@@ -0,0 +1,690 @@
"""EV-04 and EV-05: the Controller's side of the car's Manual and Solar modes.
The writes themselves are `carmode.ManualWriter`'s; this mixin owns the state
(mode, current, phases: runtime state in the store, like OPT-11's modes), the
actions, the background step that never holds up a control cycle, and what the
car means for the peak guard's ALARM PATH. DECISIONS/EV-04-manual-mode.md.
EV-05 (DECISIONS/EV-05-solar-mode.md): Solar's inputs (`car_sun_inputs`), the
peak guard's excess taken off the car first (`car_cycle`), the 0 A at shutdown
before the inverters, and the solar kWh of today.
"""
import asyncio
import dataclasses
import logging
import math
from datetime import timezone
from . import carmode, chargers, messages, packmode, packshare, peakguard
from .tariff import QUARTER_S
_LOG = logging.getLogger("goodwe")
CAR_PEAK_KEY = "car_peak_q" # {quarter start iso: the car's average W}
CAR_PEAK_MIN_W = 50.0 # a quarter the car hardly touched is not kept
CAR_PEAK_KEEP = 3200 # about a month of quarters
OVER_HOLD_S = peakguard.ALARM_HOLD_S
# EV-11: the card, the row and Why stay on this long after the car stops being
# the cause: longer than the gaps seen on the rig (150 to 250 s at 50 s
# sampling) and shorter than a quarter, or until the session really ends.
OVER_OFF_HOLD_S = 180.0
# EV-15: the longest our own phase change can take (0 A wait, settle, three
# tries of a write at 5 s apart and up to 10 s each, the select's own wait);
# the grace for the alarm never outlasts it, and after the current is set
# again it lasts at most one corroboration window.
OWN_PAUSE_MAX_S = (carmode.ZERO_WAIT_S + carmode.SETTLE_S
+ carmode.MAX_TRIES * 15.0 + 10.0)
OWN_PAUSE_TAIL_S = chargers.CORR_WINDOW_S
CAR_SUN_KEY = "car_sun" # EV-05: {day, kwh} charged from the sun today
# EV-05: at shutdown the charger's 0 A waits at most this long, then the
# inverters are released whatever the charger did.
RELEASE_WAIT_S = 15.0
class CarMixin:
# ------------------------------------------------------------------ state
def car_init(self, opts, store) -> None:
"""Mode, current and phases from the store; `ev_mode_start` says what a
restart does with the mode. A site with no charger keeps defaults and
writes nothing."""
data = getattr(store, "data", None) or {}
self.car_mode = carmode.start_mode(opts, data.get(carmode.KEY_MODE))
if carmode.start_mode(opts, carmode.MANUAL) == carmode.OFF \
and data.get(carmode.KEY_MODE) not in (None, carmode.OFF):
store.set(carmode.KEY_MODE, carmode.OFF)
clamp = carmode.clamp_for(opts, None)
a = carmode.value_a(data.get(carmode.KEY_A, carmode.DEFAULT_A), clamp)
self.car_a = carmode.DEFAULT_A if a is None else a
n = data.get(carmode.KEY_PHASES, carmode.DEFAULT_PHASES)
ok = carmode.allowed_phases(opts)
self.car_n = n if n in ok else ok[0]
self.car_rev = 0
self.car_writer = carmode.ManualWriter()
self.car_solar = carmode.SolarWriter() # EV-05
first = data.get(carmode.KEY_FIRST)
self.car_first = first if first in carmode.FIRSTS \
else carmode.DEFAULT_FIRST
self.car_cut_w = 0.0
self._car_key = None
self._car_late_s = None
self._car_sun_last = None
self._car_error_notified = False
sun = data.get(CAR_SUN_KEY)
self.car_sun = {"day": None, "kwh": 0.0}
if isinstance(sun, dict):
try:
self.car_sun = {"day": sun.get("day"),
"kwh": max(0.0, float(sun.get("kwh") or 0.0))}
except (TypeError, ValueError):
pass
self._car_sun_mono = None
self._car_sun_saved = round(self.car_sun["kwh"], 2)
self._car_task = None
self._car_step_failed = False
self.car_explains = False # the car alone explains the excess
self.car_over = False # ... held: the card and row say so
self._car_over_since = None
self._car_over_gone = None
self._car_batt_prev = None
self._car_need_real = self._car_need_excl = False # EV-10 latches
self._car_latch_block = None
self._car_over_notified = None # the session a notice was raised for
self._car_session = 0
self._car_prev_state = None
self._carq = {"key": None, "ws": 0.0, "ws_p": 0.0, "mono": None}
self._peak_proj_real = None
saved = data.get(CAR_PEAK_KEY)
self.car_peak_q = dict(saved) if isinstance(saved, dict) else {}
@property
def car_cover(self) -> bool:
"""Decision 1: do the batteries help cover the car down to the peak
reserve? Default yes."""
v = self.o.get("ev_batt_cover")
return bool(chargers.EV_OPTION_DEFAULTS["ev_batt_cover"]
if v is None else v)
def car_manual(self) -> bool:
return (self.charger.configured()
and self.car_mode == carmode.MANUAL)
def car_solar_mode(self) -> bool:
"""EV-05: a charger is set up and the mode is Solar."""
ch = getattr(self, "charger", None)
return bool(ch is not None and ch.configured()
and getattr(self, "car_mode", None) == carmode.SOLAR)
def car_clamp(self):
return carmode.clamp_for(self.o, self.car.reading)
def car_writing(self) -> bool:
"""May the add-on write to the charger now? Control runs, shadow mode is
off, no safety stop is latched and the add-on is not shutting down. Shadow mode gates charger
writes exactly as it gates inverter writes."""
latched = (any(i.sign_wd.tripped for i in self.inverters)
or self.site_sign_wd.tripped or self.circ_wd.tripped)
return bool(self.auto and not self.shadow and not latched
and not getattr(self, "stopping", False))
# ---------------------------------------------------------------- actions
def _car_action(self, what, value, now) -> dict:
"""The mode, the current or the phases, from the page or from Home
Assistant. Store state, applied by the next step with no restart."""
if not self.charger.configured():
return {"error": messages.car_refused("off")}
if what == "car_mode":
if value not in carmode.MODES:
return {"error": messages.car_refused("value")}
self.car_mode = value
self.store.set(carmode.KEY_MODE, value)
elif what == "car_sun_first":
# EV-05: arithmetic only, from the next cycle; not a user change of
# the writers (the 30 s rule and the other-writer hold stand).
if value not in carmode.FIRSTS:
return {"error": messages.car_refused("value")}
self.car_first = value
self.store.set(carmode.KEY_FIRST, value)
self.log_event(f"car sun first set to {value} by operator",
hint=messages.hint("car_sun_first"))
return {"mode": self.car_mode, "current": self.car_a,
"phases": self.car_n, "sun_first": self.car_first}
elif what == "car_current":
clamp = self.car_clamp()
if isinstance(value, bool):
return {"error": messages.car_refused("value")}
a = carmode.value_a(value, clamp)
try:
inside = a is not None and abs(float(value) - a) < 0.5
except (TypeError, ValueError):
inside = False
if not inside:
return {"error": messages.car_refused("value")}
self.car_a = a
self.store.set(carmode.KEY_A, a)
else:
if value not in (1, 3) or isinstance(value, bool):
return {"error": messages.car_refused("value")}
if value not in carmode.allowed_phases(self.o):
return {"error": messages.car_refused("phases")}
self.car_n = value
self.store.set(carmode.KEY_PHASES, value)
self.car_rev += 1
self.car_writer.user_changed()
self.car_solar.user_changed()
self.log_event(f"car {what[4:]} set to {value} by operator",
hint=messages.hint(what))
return {"mode": self.car_mode, "current": self.car_a,
"phases": self.car_n}
def car_command_values(self) -> dict:
"""The MQTT state of the three car entities."""
return {"car_mode": carmode.MODE_LABELS[self.car_mode],
"car_current": round(self.car_a),
"car_phases": str(self.car_n),
"car_sun_first": carmode.FIRST_LABELS[self.car_first]}
# ------------------------------------------------------------- the writer
def car_kick(self) -> None:
"""Start one writer step in the background, unless one is running. A
write waits up to 10 s for the charger's read-back, and a control cycle
never waits for the charger."""
if not self.charger.configured():
return
t = self._car_task
if t is not None and not t.done():
return
self._car_task = asyncio.ensure_future(self._car_run())
def _car_hold_kick(self) -> None:
"""EV-05: a cycle that holds for a missing or late reading returns
before `car_kick()`. Solar still steps (it holds, counts its dwell from
the first missing reading, and an exit still writes its 0 A); Manual is
left exactly as it was."""
if self.car_solar_engaged():
self.car_cut_w = 0.0
self.car_kick()
async def car_settle(self) -> None:
"""Wait for the writer step in flight (the checks use it)."""
t = self._car_task
if t is not None:
await asyncio.gather(t, return_exceptions=True)
async def _car_run(self) -> None:
try:
await self.car_step()
except asyncio.CancelledError:
raise
except Exception: # noqa: BLE001
# Once at WARNING-and-above, then quietly: a step that fails
# fails every second.
if not self._car_step_failed:
self._car_step_failed = True
_LOG.exception("The car charger step failed")
else:
_LOG.debug("The car charger step failed again", exc_info=True)
else:
self._car_step_failed = False
def car_solar_engaged(self) -> bool:
"""EV-05: Solar is the mode, or its 0 A on the way out is still due."""
w = getattr(self, "car_solar", None)
return bool(self.charger.configured() and w is not None
and (self.car_mode == carmode.SOLAR or w.engaged))
async def car_shutdown(self) -> None:
"""The add-on stops: no new write. Manual: a phase change in the middle
is undone by giving the car its current back, the current stands
otherwise. Solar (EV-05): 0 A, once, waited for at most
`RELEASE_WAIT_S` (`Controller.shutdown` calls this first in Solar)."""
t, self._car_task = getattr(self, "_car_task", None), None
if t is not None and not t.done():
t.cancel()
await asyncio.gather(t, return_exceptions=True)
if self.car_solar_engaged():
try:
await asyncio.wait_for(self.car_solar.release(
self.charger, self.car.reading, self.car_now(), self.car),
RELEASE_WAIT_S)
except Exception: # noqa: BLE001
_LOG.warning("The car charger could not be set to 0 A before "
"the add-on stopped: CHARGER_RELEASE.")
return
if not self.charger.configured() \
or getattr(self, "car_writer", None) is None \
or self.car_writer.seq is None:
return
try:
await asyncio.wait_for(self.car_writer.abandon(
self.charger, self.car_now(), self.car, self.car_clamp()),
15.0)
except Exception: # noqa: BLE001
_LOG.warning("The car could not be given its current back "
"before the add-on stopped: CHARGER_RESTORE.")
async def car_step(self) -> None:
"""One step of Manual. Reads nothing from the world (the cycle's read
did) and writes only through `carmode.ManualWriter`."""
if not self.charger.configured():
return
now = self.car_now()
if self.car_mode != carmode.SOLAR:
await self.car_writer.step(
self.charger, self.car.reading, mode=self.car_mode,
want_a=self.car_a, want_phases=self.car_n, rev=self.car_rev,
clamp=self.car_clamp(), now=now, tracker=self.car,
writing=self.car_writing(), shadow=bool(self.shadow),
status=self.car.status(now, True), clock=self.car_now)
w = self.car_solar
if self.car_mode == carmode.SOLAR or w.engaged:
await w.step(
self.charger, self.car.reading, mode=self.car_mode,
sun=(self.car_sun_inputs(now)
if self.car_mode == carmode.SOLAR else None),
clamp=self.car_clamp(), now=now, tracker=self.car,
writing=self.car_writing(), status=self.car.status(now, True),
clock=self.car_now)
# ------------------------------------------------------- EV-05: Solar
def car_may_charge(self, inv) -> bool:
"""May this battery take the sun? On (battery modes), not refusing a
charge, its level read and under full."""
if self.modes_on and not self.pack_mode(inv).use:
return False
if (inv.refused or 0) < 0 or inv.sign_wd.tripped:
return False
if len(self.inverters) == 1 and (self.batt_refused or 0) < 0:
return False
return inv.soc is not None and float(inv.soc) < packshare.FULL_PCT
def car_room_w(self) -> float:
"""Batteries first: the RATINGS of the batteries that may charge."""
return float(sum(inv.rating_w() for inv in self.inverters
if self.car_may_charge(inv)))
def car_spare_w(self, mono):
"""The signed spare sun now, or None when it cannot be measured: a
missing meter or battery figure, readings late past the stale bound,
or a charging car whose figure is stale, stuck or not corroborated. A
paused or idle car with a fresh reading counts as 0 W."""
if not self.inputs_ok:
return None
stale = float(self.o.get("stale_input_s", 15))
late = self._car_late_s
if late is not None and late >= stale:
return None
if self.p1_enabled:
# The meter's own bound (`meter_max_age_s`) may be longer than
# `stale_input_s`; a car write never comes from an older reading.
age = self.p1.age_s()
if age is None or age > stale:
return None
r = self.car.reading
if r is None or not r.available or not self.car.fresh(mono):
return None
if r.charging is True:
car = self.car.car_w_trusted(mono)
else:
car = 0.0
return carmode.spare_w(car, self.site_batt_w, self.grid)
def car_sun_inputs(self, mono) -> "carmode.SunInputs":
o = self.o
spare = self.car_spare_w(mono)
late = self._car_late_s
hold = late is not None and late < float(o.get("stale_input_s", 15))
room = self.car_room_w()
margin = carmode.solar_option(o, "ev_margin_w")
ph = str(o.get("ev_phases", chargers.EV_OPTION_DEFAULTS["ev_phases"]))
self._car_sun_last = carmode.SunInputs(
target_w=carmode.car_target_w(spare, room, margin,
self.car_first),
hold=hold, cut_w=self.car_cut_w,
car_w=self.car.car_w(mono), key=self._car_key,
auto=ph not in ("1", "3"), fixed_n=3 if ph == "3" else 1,
start_s=60.0 * carmode.solar_option(o, "ev_start_min"),
pause_s=60.0 * carmode.solar_option(o, "ev_pause_min"),
spare_w=spare, room_w=room, margin_w=margin,
first=self.car_first)
return self._car_sun_last
def _car_sun_tick(self, mono) -> None:
"""Solar kWh: per cycle, in Solar only, the car's power up to the sun
it may take (`spare - room` Batteries first, `spare` Car first). The
hold's battery or grid share and Manual do not count."""
if not self.car_solar_mode():
self._car_sun_mono = None
return
day = self.car.day
if day is not None and self.car_sun.get("day") != day:
self.car_sun = {"day": day, "kwh": 0.0}
self.store.set(CAR_SUN_KEY, dict(self.car_sun))
self._car_sun_saved = 0.0
last, self._car_sun_mono = self._car_sun_mono, mono
if last is None:
return
dt = min(max(mono - last, 0.0), 5.0)
p = self.car.car_w(mono)
spare = self.car_spare_w(mono)
if p is None or spare is None or dt <= 0.0:
return
sun = spare - (self.car_room_w() if self.car_first == carmode.FIRST_BATT
else 0.0)
share = min(float(p), max(0.0, sun))
if share <= 0.0:
return
self.car_sun["kwh"] += share * dt / 3.6e6
if round(self.car_sun["kwh"], 2) != self._car_sun_saved:
self._car_sun_saved = round(self.car_sun["kwh"], 2)
self.store.set(CAR_SUN_KEY, {"day": self.car_sun["day"],
"kwh": round(self.car_sun["kwh"], 4)})
def car_sun_kwh(self):
"""Today's kWh from the sun, never above today's kWh; None without a
reading of today."""
if self.car.today_kwh is None or self.car_sun.get("day") != self.car.day:
return None if self.car.today_kwh is None else 0.0
return max(0.0, min(float(self.car_sun["kwh"]),
float(self.car.today_kwh)))
async def check_car_error(self) -> None:
"""EV-05: in Solar a charger error sets the car to 0 A and raises one
warning notification; it is taken down when the error clears."""
bad = self.car_solar_mode() and self.car_solar.fault == "error"
if bad and not self._car_error_notified:
self._car_error_notified = True
await self.hass.call("persistent_notification", "create",
messages.charger_error().data())
elif not bad and self._car_error_notified:
self._car_error_notified = False
await self.hass.call("persistent_notification", "dismiss",
messages.charger_error_gone().data())
# ------------------------------------------- the car and the peak guard
def car_alarm_w(self):
"""The car's power for the guard's alarm path: Manual and Solar, fresh,
not stuck (`CarTracker.car_w_trusted`), and never above what the
read-back allows. None otherwise, and then the normal alarms stand."""
if not (self.car_manual() or self.car_solar_mode()):
return None
return self.car.car_w_trusted(self.car_now())
def _car_own_pause(self, mono) -> bool:
"""EV-15: is the car held at 0 A by the add-on's OWN phase change? From
the moment its 0 A write is SENT (the cycle runs beside the write)
until the current is set again, then at most one corroboration window.
No when it was aborted (Off, Stop, shadow, unplug, another writer), a
write was refused, or it ran past its own maximum."""
if self.car_solar_mode():
return self._car_solar_pause(mono)
wr = getattr(self, "car_writer", None)
if wr is None or (wr.seq is None and wr.phase_done_at is None
and wr.zero_sent_at is None) or wr.hold:
return False
r = self.car.reading
if not (self.car_manual() and self.car_writing()
and r is not None and r.available and r.state != "A"):
return False
q = wr.seq
if q is None and wr.zero_sent_at is not None: # sent, not yet back
return 0.0 <= mono - wr.zero_sent_at <= OWN_PAUSE_MAX_S
if q is not None:
return not q.get("failed") and 0.0 <= mono - q["t0"] \
<= OWN_PAUSE_MAX_S
return 0.0 <= mono - wr.phase_done_at <= OWN_PAUSE_TAIL_S
def _car_solar_pause(self, mono) -> bool:
"""EV-05: Solar's own 0 A (a pause, the peak cut, the phase change)
gets EV-15's grace, bounded the same way: from the moment it is sent,
at most `OWN_PAUSE_MAX_S`; a phase change as in Manual. None for Stop,
shadow, an unplugged car or another writer."""
wr = getattr(self, "car_solar", None)
r = self.car.reading
if wr is None or wr.hold or not self.car_writing() or r is None \
or not r.available or r.state == "A":
return False
q = wr.seq
if q is not None:
return not q.get("failed") and 0.0 <= mono - q["t0"] \
<= OWN_PAUSE_MAX_S
if wr.zero_sent_at is not None:
return 0.0 <= mono - wr.zero_sent_at <= OWN_PAUSE_MAX_S
if wr.zero_at is not None and 0.0 <= mono - wr.zero_at \
<= OWN_PAUSE_MAX_S:
return True
return wr.phase_done_at is not None \
and 0.0 <= mono - wr.phase_done_at <= OWN_PAUSE_TAIL_S
def _car_quarter(self, proj, w, mono, wg=None) -> None:
"""The car's energy in the open quarter, for the average the guard's
house leaves out and for the peak line. `wg` (EV-15) is the figure for
grading during our own pause; its energy is kept apart (`ws_p`) so the
guard's input is unchanged."""
q = self._carq
key = None if proj is None else proj.block_start
last = q["mono"]
if key != q["key"]:
self._car_bank(q)
q["key"], q["ws"], q["ws_p"], q["ws_b"] = key, 0.0, 0.0, 0.0
if key is not None and last is not None:
dt = min(max(mono - last, 0.0), 5.0)
if w is not None:
q["ws"] += float(w) * dt
if not self.car_solar_mode():
# EV-05: only a charge you set can be "set by the car";
# a Solar charge runs on spare sun and is cut first.
q["ws_b"] = q.get("ws_b", 0.0) + float(w) * dt
elif wg is not None:
q["ws_p"] = q.get("ws_p", 0.0) + float(wg) * dt
q["mono"] = mono
def _car_bank(self, q) -> None:
"""A closed quarter in which the car drew its share goes on the list."""
key = q["key"]
if key is None:
return
avg = q.get("ws_b", q["ws"]) / QUARTER_S
if avg < CAR_PEAK_MIN_W:
return
self.car_peak_q[key.astimezone(timezone.utc).isoformat()] = round(avg)
if len(self.car_peak_q) > CAR_PEAK_KEEP:
for k in sorted(self.car_peak_q)[:-CAR_PEAK_KEEP]:
del self.car_peak_q[k]
self.store.set(CAR_PEAK_KEY, dict(self.car_peak_q))
def car_avg_w(self, proj, w, graded=False) -> float:
"""The car's average over the whole open quarter: what it drew so far
and `w` for the rest. `graded` (EV-15) adds what it drew during our
own pause."""
if proj is None or w is None:
return 0.0
left = max(0.0, QUARTER_S - float(proj.elapsed_s))
so_far = self._carq["ws"] if self._carq["key"] == proj.block_start \
else 0.0
if graded and self._carq["key"] == proj.block_start:
so_far += self._carq.get("ws_p", 0.0)
return (so_far + float(w) * left) / QUARTER_S
def car_exclude(self, proj, w):
"""Decision 1 off: the projection the guard sees without the car
(`house - car_w`). Unchanged without a fresh car reading."""
if proj is None or w is None or proj.block_start is None:
return proj
avg = self.car_avg_w(proj, w)
return dataclasses.replace(
proj, projected_w=max(0.0, float(proj.projected_w) - avg),
held_w=max(0.0, float(proj.held_w) - float(w)))
def car_exclude_alarm(self, proj, w):
"""EV-10b: the period as it would be without the car, for grading the
alarm. The house alone, the batteries giving only what the house
would draw from them: the car's share of their power is not charged to
the house. The rest of the period keeps its sign (`held - car`, an
export while the batteries give more than the house uses), so
`misses_aim` adds the batteries back to exactly the house. What is
already done is clipped at 0 Ws: no export is credited for power only
the car asked for. Unchanged without a fresh car reading."""
if proj is None or w is None or proj.block_start is None:
return proj
avg = self.car_avg_w(proj, w, graded=True)
left = max(0.0, QUARTER_S - float(proj.elapsed_s))
held = float(proj.held_w)
done_ws = QUARTER_S * float(proj.projected_w) - max(held, 0.0) * left
car_ws = avg * QUARTER_S - float(w) * left # the car so far
held_x = held - float(w)
return dataclasses.replace(
proj, held_w=held_x,
projected_w=(max(0.0, done_ws - car_ws)
+ max(held_x, 0.0) * left) / QUARTER_S)
def car_cycle(self, real_proj, guard, target_w, now_utc) -> None:
"""After the guard has decided: does the car alone explain the excess?
`real_proj` is the projection WITH the car, whatever the guard saw."""
mono = self.car_now()
# EV-05: the period's own key, and the excess Solar takes off the car
# first (the writer step that follows this cycle acts on it at once).
self._car_key = None if real_proj is None else real_proj.block_start
self.car_cut_w = 0.0
# What the guard would ASK the batteries to give (`wanted_w`, its floor
# before the rating) is taken off the car instead, up to the excess:
# batteries that only stop charging are not asked for anything.
if self.car_solar_mode() and real_proj is not None \
and target_w is not None and real_proj.block_start is not None \
and guard is not None and guard.engaged and guard.blind is None:
ex = peakguard.excess_w(real_proj, target_w)
want = guard.wanted_w
if ex is not None and want is not None and math.isfinite(ex) \
and math.isfinite(want) and ex > 0.0 and want > 0.0:
self.car_cut_w = float(min(ex, want))
self._car_sun_tick(mono)
w = self.car_alarm_w()
# EV-15: the figure for grading only. Our own phase change holds the
# car at 0 A and the energy meter cannot corroborate it then, so for
# that bounded time its fresh, not stuck figure stands in.
wg = w
if w is None and self._car_own_pause(mono):
wg = self.car.car_w_paused(mono)
self._car_quarter(real_proj, w, mono, wg)
self._car_session_tick(mono)
explains = over = False
if real_proj is not None and target_w is not None \
and real_proj.block_start is not None:
# EV-10: every cycle, so the latches do not depend on the option.
graded = self._car_explains_alarm(real_proj, guard, target_w, wg)
if self.car_solar_mode():
# EV-05: Solar is cut first, so it is never "over"; its own
# 0 A must not leave the house's alarm graded with the car.
explains = graded
elif self.car_cover:
explains = over = graded
elif w is not None:
ex = float(real_proj.projected_w) - float(target_w)
over = ex > 0.0 and self.car_avg_w(real_proj, w) >= ex
self.car_explains = explains
# EV-11: on once the condition has stood for OVER_HOLD_S, a short gap
# in it not starting that count again; off only after it has been gone
# for OVER_OFF_HOLD_S. `car_explains` (the alarm decision) has no hold.
if over:
self._car_over_gone = None
if self._car_over_since is None:
self._car_over_since = mono
if mono - self._car_over_since >= OVER_HOLD_S:
self.car_over = True
else:
if self._car_over_gone is None:
self._car_over_gone = mono
if mono - self._car_over_gone >= OVER_OFF_HOLD_S:
self.car_over, self._car_over_since = False, None
self._car_over_gone = None
def _car_explains_alarm(self, real_proj, guard, target_w, w) -> bool:
"""EV-10: is the alarm's own test true with the car and false without
its fresh, corroborated share (`car_exclude_alarm`), on the same landing? The
tests are the alarms': a saturated guard and a floor with other
batteries left are graded by `load_too_high` on where the period lands
(SAFETY-81 / 87); a floor that leaves nothing is graded by SAFETY-126's
`misses_aim` (the batteries at 0 W from now on), latched for the
quarter. That latch is kept here twice, on the period as it is
(`_car_need_real`) and without the car (`_car_need_excl`), from the
same `misses_aim` and the same batteries reading. Both reset at a new
quarter and when the guard no longer wants power, whatever the cover
option says (this runs every cycle). A car that is 0 W, or untrusted
(`w` None sets the second latch), makes the two equal and explains
nothing."""
batt, prev = self.site_batt_w, self._car_batt_prev
self._car_batt_prev = batt
wants = bool(guard is not None and guard.engaged
and guard.blind is None
and (guard.wanted_w or 0.0) > 0.0)
if real_proj.block_start != self._car_latch_block:
self._car_latch_block = real_proj.block_start
self._car_need_real = self._car_need_excl = False
if not wants:
self._car_need_real = self._car_need_excl = False
if batt is not None and prev is not None:
batt = min(float(batt), float(prev))
excl = self.car_exclude_alarm(real_proj, w)
if wants:
if batt is None:
self._car_need_real = self._car_need_excl = True
else:
self._car_need_real = self._car_need_real or \
peakguard.misses_aim(real_proj, batt_w=batt,
target_w=target_w)
self._car_need_excl = self._car_need_excl or w is None or \
peakguard.misses_aim(excl, batt_w=batt, target_w=target_w)
if w is None or batt is None or not wants \
or not (guard.saturated or guard.floor_limited):
return False
if guard.saturated:
rating = self.site_rating_w
elif (guard.floor_w or 0.0) > 0.0 and guard.able_w is not None:
rating = guard.able_w
else:
return bool(not guard.within_aim and self._car_need_real
and not self._car_need_excl)
def high(p):
return peakguard.load_too_high(
p, batt_w=batt, ceiling_w=guard.ceiling_w,
achievable_w=rating)
return bool(high(real_proj) and not high(excl))
def _car_session_tick(self, mono) -> None:
"""A charging session is a plug-in: the state goes from no car to a
car. The notice is raised once per session."""
s = self.car.status(mono, True)
if s in (chargers.NONE_,) and self._car_prev_state not in (
None, chargers.NONE_):
self._car_over_notified = None
# The session is over: that is a real end, with no hold.
self.car_over = False
self._car_over_since = self._car_over_gone = None
if s not in (chargers.NONE_, None) and self._car_prev_state in (
chargers.NONE_, None):
self._car_session += 1
self._car_prev_state = s
async def check_car_over(self) -> None:
"""One grey notice per charging session: the charge you set takes the
15-minute period over the peak limit. Raised nowhere else."""
if not self.car_over or self._car_over_notified == self._car_session:
return
self._car_over_notified = self._car_session
_LOG.info("The car charge you set takes this 15-minute period over "
"the peak limit: CAR_OVER_PEAK.")
await self.hass.call("persistent_notification", "create",
messages.car_over(f"{self.car_a:.0f}").data())
def car_peak_by_car(self, reading, now):
"""`(True, local time)` when the month's peak quarter was one the car
mostly made (it drew half the peak or more), else `(False, None)`."""
if reading is None or not getattr(reading, "is_observed", False) \
or reading.quarter_start is None or not self.car_peak_q:
return False, None
avg = self.car_peak_q.get(
reading.quarter_start.astimezone(timezone.utc).isoformat())
if avg is None or reading.peak_w is None \
or 2.0 * float(avg) < float(reading.peak_w):
return False, None
return True, reading.quarter_start
+22
View File
@@ -253,6 +253,7 @@ class CycleMixin:
stale_after = float(self.o.get("stale_input_s", 15))
late_s = self._readings_late(site_standing) # SAFETY-128
self._car_late_s = late_s # EV-05: Solar holds, then the stale rule
self._late_zero = late_s is not None and late_s >= stale_after
# ⚠️ `any`, NOT the sole unit's. The hold exists so a single missed
# poll does not become a fault; a LATCHED inverter must still reach the
@@ -272,6 +273,7 @@ class CycleMixin:
# this cycle's. (DECISIONS/MAIN-orchestration-archive.md)
self.why_words = messages.why_waiting(bad_for)
self._why_waiting_since = now - timedelta(seconds=bad_for)
self._car_hold_kick() # EV-05: Solar counts from now
return
if late_s is not None and late_s < stale_after and self.inputs_ok \
and (self.auto or self.shadow) \
@@ -279,6 +281,7 @@ class CycleMixin:
and not (n_units > 1 and self.site_sign_wd.tripped):
self.reason = f"readings late {late_s:.0f}s" # SAFETY-128: hold
self.why_words = messages.why_late()
self._car_hold_kick() # EV-05: Solar holds its current
return
claims = []
@@ -391,6 +394,15 @@ class CycleMixin:
if self._peak_proj is not None and len(self.inverters) > 1:
self._peak_proj = next_quarter(self._peak_proj,
self.p1.averager.max_hold_s)
# EV-04, decision 1: with "Batteries help with the peak while the car
# charges" OFF, the guard's house leaves the car out (`house - car_w`).
# `_peak_proj_real` keeps the quarter as the meter will bill it, for
# the car's own words. Only a fresh, trusted car reading is left out.
self._peak_proj_real = self._peak_proj
if (self._peak_proj is not None and not self.car_cover
and self.car_manual()):
self._peak_proj = self.car_exclude(self._peak_proj,
self.car_alarm_w())
self.peak_guard = None if not self.p1_enabled else peakguard.decide(
self._peak_proj,
# ⚠️ THE SITE SUM. The guard sizes a floor from what the battery is
@@ -440,6 +452,13 @@ class CycleMixin:
self.peak_guard = self._peak_landing(self.peak_guard)
self.peak_guard = peakguard.cap_floor( # SAFETY-128
self.peak_guard, self.answer.peak_cap(site_standing))
# EV-04: does the car alone explain what the guard cannot hold? Fresh
# car readings only; the claim, the floor and the commands above are
# not touched by it.
self.car_cycle(self._peak_proj_real, self.peak_guard,
peakguard.quarter_target_w(
float(self.o.get("peak_cap_w", 3500)),
self.peak_margin_w, _reading), now)
# SITE, and peakguard.claim() says so on the object it builds: the
# quantity is the 15-minute average OFFTAKE AT THE GRID CONNECTION,
# which the capacity tariff bills (one quarter-hour peak per site, not
@@ -1048,6 +1067,9 @@ class CycleMixin:
# and, on a change only, one Home Assistant call.
await self.check_price_gap()
await self.check_charger()
await self.check_car_over()
await self.check_car_error() # EV-05: Solar's charger error
self.car_kick() # EV-04/05: in the background
await self.check_fixed_note()
# SAFETY-31's alarm, and its boundary is the LATCH, not a number: it
+78 -3
View File
@@ -15,8 +15,8 @@ from .freeze import rail_unreachable, rail_w
from .hass import OUTAGE
from .maintenance import IDLE
from .mqtt import (
PAYLOAD_NONE, announced_units, optional_keys, parse_command, unit_slugs,
unit_state_key,
BASE, PAYLOAD_NONE, announced_units, optional_keys, parse_car_command,
parse_command, unit_slugs, unit_state_key,
)
from . import peakguard
from . import pv as pv_read
@@ -35,6 +35,9 @@ class StatusMixin:
already holds the last choice). Never raises: MQTT must not reach
control. (DECISIONS/MAIN-orchestration-archive.md)"""
try:
if isinstance(topic, str) and topic.startswith(f"{BASE}/car/"):
await self._car_mqtt_command(topic, payload, retained)
return
slug, action, value, why = parse_command(
topic, payload, retained, packmode.MODES)
if why is None:
@@ -68,6 +71,29 @@ class StatusMixin:
except Exception: # noqa: BLE001
_LOG.exception("Home Assistant command could not be handled")
async def _car_mqtt_command(self, topic, payload, retained) -> None:
"""EV-04: one command from the car's HA entities, through
handle_action(). A retained command is never applied. Never raises."""
action, value, why = parse_car_command(topic, payload, retained)
result = None
if why is None:
result = await self.handle_action(action, value=value)
if isinstance(result, dict) and "error" not in result:
self.mqtt.publish(self.car_command_values())
return
why = result["error"] if isinstance(result, dict) else "refused"
else:
why = messages.car_refused("topic") if why == "topic" else \
messages.pack_refused(why)
topic_s = "".join(c if c.isprintable() else "?" for c in str(topic)[:128])
_LOG.debug("Home Assistant command %s %s refused: %s", topic_s,
repr(payload)[:48], why)
if (topic_s, why) not in self._mqtt_refused \
and len(self._mqtt_refused) < 32:
self._mqtt_refused.add((topic_s, why))
_LOG.warning("Home Assistant command on %s ignored: %s", topic_s,
why)
@property
def why_words(self) -> str:
"""The page's "Why" line. While control waits for a missing reading
@@ -178,9 +204,46 @@ class StatusMixin:
out.append({"ok": False, "warn": True, "id": "charger",
"text": messages.row_charger_unreach(
f"{brussels(self.car.bad_since_utc):%H:%M}")})
if self.car.other_writer(datetime.now(timezone.utc)):
w = self.car_writer
sw = self.car_solar
if self.car_mode == "solar":
# EV-05: in Solar another writer stops the add-on's writes: amber,
# the same words as in Manual.
if sw.other:
out.append({"ok": False, "warn": True, "id": "charger_other",
"text": messages.row_charger_other()})
if sw.gave_up:
out.append({"ok": False, "warn": True, "id": "charger_refused",
"text": messages.row_charger_refused()})
if sw.phases_gave_up:
out.append({"ok": False, "warn": True, "id": "charger_phases",
"text": messages.row_charger_phases()})
elif self.car_mode == "manual":
# EV-04: in Manual the add-on's own writes are not "another
# writer"; its own detector (a read-back that differs from the
# last write for 30 s) says so, in grey.
if w.other:
out.append({"ok": True, "warn": True, "id": "charger_other",
"text": messages.row_charger_other()})
if w.gave_up:
out.append({"ok": False, "warn": True, "id": "charger_refused",
"text": messages.row_charger_refused()})
if w.phases_gave_up:
out.append({"ok": False, "warn": True, "id": "charger_phases",
"text": messages.row_charger_phases()})
elif self.car.other_writer(datetime.now(timezone.utc)):
out.append({"ok": True, "warn": True, "id": "charger_writer",
"text": messages.row_charger_writer()})
if self.car.stuck(self.car_now()):
out.append({"ok": False, "warn": True, "id": "charger_stuck",
"text": messages.row_charger_stuck()})
r = self.car.reading
if r is not None and r.available and r.error:
out.append({"ok": True, "warn": True, "id": "charger_error",
"text": messages.row_charger_error(r.error)})
if self.car_over:
out.append({"ok": True, "warn": True, "id": "car_over",
"text": messages.row_car_over()})
return out
def car_values(self) -> dict:
@@ -192,6 +255,7 @@ class StatusMixin:
with homeview.in_lang("en"):
word = homeview.car_state_word(state)
return {
**self.car_command_values(),
"car_state": word,
# `ABSENT_AS_UNKNOWN` stays the one PV key (test_pv.py): an absent
# car figure is HA's own "no value" payload, sent by name.
@@ -199,6 +263,8 @@ class StatusMixin:
or r.power_w is None else round(r.power_w, 1)),
"car_today_kwh": (PAYLOAD_NONE if self.car.today_kwh is None
else round(self.car.today_kwh, 3)),
"car_today_solar_kwh": (PAYLOAD_NONE if self.car_sun_kwh() is None
else round(self.car_sun_kwh(), 3)),
}
# -- UI ------------------------------------------------------------------
@@ -335,6 +401,13 @@ class StatusMixin:
if _pg is None:
out.append({"ok": True, "warn": True, "id": "peak_guard",
"text": messages.row_peak_guard_waiting()})
elif self.car_explains and (_pg.saturated or _pg.floor_limited):
# EV-04: the car you set is what the batteries cannot hold, so
# no red row. The grey row `car_over` says what is going on.
out.append({"ok": True, "warn": False, "id": "peak_guard",
"text": messages.row_peak_guard_on(
_pg.floor_w or 0.0, _pg.ceiling_w,
shadow=self.shadow)})
elif _pg.saturated and not _pg.within_aim:
out.append({"ok": False, "warn": False, "id": "peak_guard",
"runs": True,
@@ -864,6 +937,8 @@ class StatusMixin:
now = datetime.now(timezone.utc)
if what in ("pack_use", "pack_mode", "pack_sell"):
return self._pack_action(what, unit, value, now)
if what in ("car_mode", "car_current", "car_phases", "car_sun_first"):
return self._car_action(what, value, now)
if what == "auto_toggle":
self.auto = not self.auto
self.store.set("auto", self.auto)
+153 -7
View File
@@ -19,7 +19,8 @@ section at the bottom and is held to STYLE.md by test_messages.py.
import contextlib
from datetime import datetime, timedelta, timezone
from . import arbitrage, cheaproll, handback, messages, peakguard, priceruns, uitext
from . import (arbitrage, carmode, cheaproll, handback, messages, peakguard,
priceruns, uitext)
from .dayplan import EFF
from .maintenance import CHARGE as M_CHARGE, DRAIN as M_DRAIN, HOLD as M_HOLD
from .maintenance import IDLE as M_IDLE, next_slot_start
@@ -871,8 +872,10 @@ def peak_engaged(c) -> bool:
only), so no battery gives power for it. Nor when the quarter ends on
the aim anyway (SAFETY-126, `within_aim`)."""
pg = getattr(c, "peak_guard", None)
# EV-04: not for a cause the car's own Why explains.
return bool(pg is not None and pg.engaged and (pg.floor_w or 0.0) > 0.0
and not pg.within_aim)
and not pg.within_aim
and not getattr(c, "car_explains", False))
def battery_rows(c, shadow, running, held=False):
@@ -1129,10 +1132,31 @@ def month_peak(c, now):
if pg is not None:
out["period_w"] = pg.projected_w
ceiling = pg.ceiling_w or limit_w
real = getattr(c, "_peak_proj_real", None)
if getattr(c, "car_enabled", False) and c.charger.configured() \
and not c.car_cover and c.car_manual() and real is not None \
and getattr(real, "block_start", None) is not None:
# EV-04, decision 1 off: the guard's own projection leaves the car
# out; the period as the meter will bill it does not.
out["period_w"] = real.projected_w
out["line"] = line_period(out["period_w"], ceiling, c.shadow,
unmeasured=getattr(c, "peak_unmeasured_s", 0.0)
> 0.0,
cut=getattr(c, "room_charge", False))
# EV-04: when a car charge you asked for is in this period, and when one
# set the month's peak. Both empty without a charger in Manual.
out["car_line"] = out["set_by"] = ""
if getattr(c, "car_enabled", False) and c.charger.configured():
# EV-05: Manual only. A Solar charge is cut first for the peak.
w = c.car_alarm_w() if c.car_manual() else None
if pg is not None and w is not None and w >= 500.0 \
and out["period_w"] is not None and (pg.engaged or c.car_over):
out["car_line"] = _t("peak.car", kw=_kw(out["period_w"]),
car=_kw(w),
cov=_kw(max(0.0, float(c.site_batt_w or 0))))
by_car, at = c.car_peak_by_car(reading, now)
if by_car:
out["set_by"] = _t("peak.set_by_car", t=f"{brussels(at):%H:%M}")
return out
@@ -1278,6 +1302,93 @@ def _car_why(key, c, good):
return _t("car.why." + (key if key else "wait"))
def _car_manual_why(c, key):
"""The Why of Manual: what you set, and what the peak limit does about it.
Plan lines: two sentences of at most 12 words."""
a = f"{float(c.car_a):.0f}"
w = c.car_writer
pct = _pct(c.o.get("peak_soc_floor", peakguard.PEAK_OPTION_DEFAULTS[
"peak_soc_floor"]))
if c.car_over:
pg = getattr(c, "peak_guard", None)
if not c.car_cover:
return _t("car.why.manual_nocover", a=a)
return _t("car.why.manual_over" if pg is not None and pg.floor_limited
else "car.why.manual_full", a=a, pct=pct)
if c.shadow:
t, n = w.would if w.would is not None else (c.car_a, c.car_n)
return _t("car.why.manual_would", a=f"{float(t):.0f}",
phases=car_phases_word(n))
if not c.auto:
return _t("car.why.manual_stopped")
if key in ("none", "full"):
return _t("car.why.manual_wait", a=a)
if w.blocked:
return _t("car.why.manual_blocked")
if c.car_cover and peak_engaged(c):
giving = max(0.0, float(c.site_batt_w or 0.0))
return _t("car.why.manual_cover", a=a, kw=_kw(giving), pct=pct)
return _t("car.why.manual_set", a=a, phases=car_phases_word(c.car_n))
def _names(invs) -> str:
names = [str(i.name) for i in invs]
return " " .join(names[:1]) if len(names) == 1 else \
", ".join(names[:-1]) + " " + _t("car.and") + " " + names[-1]
def _car_solar_why(c, key):
"""EV-05: the Why of Solar, from what the plan did this cycle. Plan
lines: two sentences of at most 12 words."""
w = c.car_solar
p = w.plan
o = getattr(c, "o", {}) or {}
if w.other:
return _t("car.why.solar_other")
if c.shadow:
a, n = w.would if w.would is not None else (0.0, p.n)
if a and a >= 6:
return _t("car.why.manual_would", a=f"{float(a):.0f}",
phases=car_phases_word(n))
return _t("car.why.solar_would")
if not c.auto or not c.car_writing():
return _t("car.why.solar_stopped")
if w.fault in ("error", "stuck"):
return _t("car.why.solar_" + w.fault)
if key in ("none", "full"):
return _t("car.why." + key)
why = p.why
if why == "running":
sun = getattr(c, "_car_sun_last", None)
if sun is None or sun.spare_w is None:
return _t("car.why.solar_unknown")
if sun.first == carmode.FIRST_CAR:
return _t("car.why.solar_car",
kw=_kw(max(0.0, sun.spare_w - sun.margin_w)),
phases=car_phases_word(w.n_calc))
room = [i for i in c.inverters if c.car_may_charge(i)]
full = [i for i in c.inverters if not c.car_may_charge(i)
and i.soc is not None and float(i.soc) >= 100.0]
left = _kw(max(0.0, sun.spare_w - sun.room_w))
m = watts_text(sun.margin_w)
if room and full:
return _t("car.why.solar_batt", a=_names(room), b=_names(full),
kw=left, m=m)
if room:
return _t("car.why.solar_batt_room", a=_names(room), kw=left,
m=m)
return _t("car.why.solar_batt_full", kw=left, m=m)
mins = {"hold": "ev_pause_min"}.get(why, "ev_start_min")
s = f"{carmode.solar_option(o, mins):.0f}"
if why in ("hold", "start", "cut", "unknown"):
return _t("car.why.solar_" + why, s=s)
return _t("car.why.solar_paused", s=s)
def watts_text(w) -> str:
return f"{float(w):.0f} W"
def car_block(c, now):
"""The Car card for `/status`, or None when no charger is switched on (the
page then draws nothing, as before)."""
@@ -1290,19 +1401,46 @@ def car_block(c, now):
good = c.car.last_good
fresh = configured and c.car.fresh(mono)
today = None
mode = getattr(c, "car_mode", "off") if configured else "off"
if configured and c.car.today_kwh is not None:
today = _t("car.today", kwh=_kwh(c.car.today_kwh))
return {
sun = c.car_sun_kwh() if hasattr(c, "car_sun_kwh") else None
today = (_t("car.today_sun", kwh=_kwh(c.car.today_kwh),
sun=_kwh(sun))
if mode == "solar" and sun is not None
else _t("car.today", kwh=_kwh(c.car.today_kwh)))
why = _car_why(key, c, good)
if mode == "manual" and key in ("charging", "waiting", "none", "full"):
why = _car_manual_why(c, key)
if mode == "solar" and key in ("charging", "waiting", "none", "full",
"fault"):
why = _car_solar_why(c, key)
# EV-05: a car Solar holds at 0 A is waiting for the sun.
if key == "waiting" and c.car_solar.plan.a <= 0.0:
key = "paused"
out = {
"state": key or "wait",
"chip": car_state_word(key),
"kind": _CAR_KIND.get(key, "muted"),
"big": _car_big(key, c, r if fresh else None, good),
"today": today,
"why": _car_why(key, c, good),
"mode": "off",
"why": why,
"mode": mode,
"power_w": (None if not fresh or r is None or r.power_w is None
else round(float(r.power_w), 1)),
}
if configured:
# EV-04: what the page can set. EV-05 adds Solar and where its spare
# sun goes first (Night is a later card, so it is not offered).
clamp = c.car_clamp()
hi = int(clamp) if clamp is not None and clamp >= 6 else 6
out["modes"] = list(carmode.MODES)
out["first"] = {"value": getattr(c, "car_first", carmode.DEFAULT_FIRST),
"choices": list(carmode.FIRSTS)}
out["current"] = {"value": round(float(c.car_a)), "min": 6,
"max": hi}
out["phases"] = {"value": c.car_n,
"choices": list(carmode.allowed_phases(c.o))}
return out
# =========================================================================== #
@@ -1815,8 +1953,16 @@ def _samples() -> list:
out += [("title", _t("car.state." + k)) for k in words["car"]["state"]]
out += [("plan", _t("car.big." + k, t="09:12")) for k in
words["car"]["big"]]
out += [("plan", _t("car.why." + k, a="10", brand="Alfen"))
out += [("plan", _t("car.why." + k, a="10", brand="Alfen", kw="8.6 kW",
pct="20 %", phases=car_phases_word(3),
b="inverter-b", m="100 W", s="5"))
for k in words["car"]["why"]]
out += [("plan", _t("car.why.solar_batt", a="inverter-a",
b="inverter-b", kw="2.0 kW", m="100 W")),
("plan", _t("car.today_sun", kwh="14.2 kWh", sun="3.1 kWh"))]
out += [("plan", _t("peak.car", kw="12.1 kW", car="11.0 kW",
cov="8.6 kW")),
("plan", _t("peak.set_by_car", t="19:45"))]
out += [("plan", _t("car.today", kwh="14.2 kWh")),
("plan", "11.0 kW · 16 A · " + _t("car.phase_many", n=3))]
out += [("plan", line_no_trade(k)) for k in
+36 -3
View File
@@ -42,6 +42,7 @@ from .arbiter import (
P_SAFETY, SET, Claim, Resolution, actuator_for, pre_resolve, resolve,
)
from . import allocator
from . import carmode
from . import chargers
from . import dayplan
from . import modetrade
@@ -83,8 +84,9 @@ from .maintenance import (
CHARGE, DRAIN, HOLD, IDLE, POWER_MOVING, MaintConfig, Maintenance,
FAIL_BACKOFF_DAYS, MaintResult, arbitrate as maint_arbitrate, site_zone,
)
from .mqtt import (MODE_CONFIGS_KEY, MODE_LABELS, USE_OFF, USE_ON,
MqttPublisher, announced_units, mode_configs,
from .mqtt import (CAR_CONFIGS_KEY, MODE_CONFIGS_KEY, MODE_LABELS, USE_OFF,
USE_ON, MqttPublisher, announced_units, car_configs,
mode_configs,
optional_keys, parse_command, unit_slugs, unit_state_key)
from . import peakguard
from . import packshare
@@ -113,6 +115,7 @@ from . import web
# stays importable from `app.main`. DECISIONS/MAIN-orchestration.md.
from .ctl_tasks import TasksMixin
from .ctl_status import StatusMixin
from .ctl_car import CarMixin
from .ctl_alarms import (
AlarmsMixin, HANDBACK_CYCLES, REANNOUNCE_S, ROLLING_BOUND_CYCLES,
ROLLING_S, SHORT_CYCLES, SHORT_SPAN_S,
@@ -183,7 +186,7 @@ def _load_latch(data, now=None):
class Controller(InputsMixin, WritesMixin, TradeMixin, CycleMixin, AlarmsMixin,
StatusMixin, TasksMixin):
StatusMixin, TasksMixin, CarMixin):
def __init__(self, opts: dict, hass: HomeAssistant, store, mqtt_pub, *, stop,
peak_db_path: str = "/data/tariff.db",
price_history_path: str = "/data/price_history.json",
@@ -576,6 +579,8 @@ class Controller(InputsMixin, WritesMixin, TradeMixin, CycleMixin, AlarmsMixin,
self._charger_probed = False
self._car_down_logged = False
self._car_announced = False
# EV-04: Manual mode's state (runtime, in the store) and its writer.
self.car_init(opts, store)
self.house_profile = None
if self.fc_entity is not None:
self.house_profile = dayplan.HouseProfile(
@@ -1035,7 +1040,15 @@ class Controller(InputsMixin, WritesMixin, TradeMixin, CycleMixin, AlarmsMixin,
self.stopping = True
_LOG.info(handback.log_shutdown(handback.current())
or "shutting down - commanding 0 W on every inverter")
# EV-05: Solar's fail state is 0 A, and it goes out BEFORE the
# inverters go to 0 W (bounded by `ctl_car.RELEASE_WAIT_S`). Manual
# keeps EV-04's order: the inverters first, then undo a phase change.
solar = self.car_solar_engaged()
if solar:
await self.car_shutdown()
await self.command_site_release()
if not solar:
await self.car_shutdown()
self.mqtt.close()
@@ -1062,6 +1075,23 @@ def mode_announcement(opts, store) -> tuple:
return modes, retract
def car_announcement(opts, store) -> tuple:
"""EV-04: `(car, retract)` for the MQTT publisher at start-up: the three car
entities while a charger is switched on, and the config topics to remove
when it is not (`mqtt.car_configs()`). A site that never had a charger gets
nothing and its store is not written."""
car = None
if chargers.census_entity(opts):
amps = chargers.max_a(opts)
car = (chargers.EV_OPTION_DEFAULTS["ev_max_a"] if amps is None
else amps, carmode.allowed_phases(opts))
stored = store.data.get(CAR_CONFIGS_KEY)
keep, retract = car_configs(car, stored)
if keep and keep != stored:
store.set(CAR_CONFIGS_KEY, keep)
return car, retract
def control_task_done(task: asyncio.Task, *, controller, stop: asyncio.Event,
died: list) -> None:
"""Done-callback on the control task: log its death now and wake amain()
@@ -1231,6 +1261,7 @@ async def amain() -> None:
# OPT-11 P2: each battery's switch and mode list, only while
# battery modes are on (`mode_announcement()`).
_modes, _retract = mode_announcement(opts, store)
_car, _car_retract = car_announcement(opts, store)
broker = await hass.mqtt_service()
pub = MqttPublisher(
broker.get("host") if broker else None,
@@ -1250,6 +1281,8 @@ async def amain() -> None:
units=roster_names(opts),
modes=_modes,
retract=_retract,
car=_car,
car_retract=_car_retract,
)
except Exception as err: # noqa: BLE001
_LOG.warning("MQTT unavailable (%s) - continuing without status entities", err)
+113
View File
@@ -188,6 +188,10 @@ T_METER_FROZEN_NL = "Meter staat mogelijk vast"
TITLE_NL = {T_LOOP_BOUND: T_LOOP_BOUND_NL, T_OUTPUT_CLAMP: T_OUTPUT_CLAMP_NL}
T_CHARGER_UNREACH = "Charger not reachable"
T_CHARGER_UNREACH_NL = "Laadpaal onbereikbaar"
T_CAR_OVER = "Car over the peak limit"
T_CAR_OVER_NL = "Auto boven de piekgrens"
T_CHARGER_ERROR = "Charger error, car paused"
T_CHARGER_ERROR_NL = "Laadpaalfout, auto gepauzeerd"
T_NO_PRICES = "No prices"
T_NO_PRICES_NL = "Prijzen ontbreken"
@@ -201,6 +205,8 @@ ID_METER_FROZEN = "goodwe_meter_frozen"
ID_MAINT_FAILED = "goodwe_maint_failed_{slug}"
ID_NO_PRICES = "goodwe_no_prices"
ID_CHARGER_UNREACH = "goodwe_charger_unreachable"
ID_CAR_OVER = "goodwe_car_over"
ID_CHARGER_ERROR = "goodwe_charger_error"
# PRICE-01: an earlier build raised a card with this id. Nothing raises it now;
# the add-on only dismisses it at start.
OLD_FIXED_CARD_ID = "goodwe_fixed_tariff_unused"
@@ -496,6 +502,77 @@ def row_charger_writer() -> str:
"Iets anders wijzigt de laadpaal en deze add-on leest alleen.")
def car_over(a_text) -> Notice:
"""EV-04: a charge the user set takes the 15-minute period over the peak
limit, and the batteries cannot hold it. Grey, once per charging session.
Not an alarm: the car is never throttled, the user asked for it."""
en = (f"You set {a_text} A, which takes this 15-minute period over the "
"peak limit.")
nl = f"U stelde {a_text} A in, wat dit kwartier boven de piekgrens brengt."
return Notice(ID_CAR_OVER, INFO, T_CAR_OVER, en,
body_nl=f"{T_CAR_OVER_NL}. {nl}")
def charger_error() -> Notice:
"""EV-05: in Solar the charger reports an error, so the add-on set the car
to 0 A. Said once per error, taken down when it clears."""
en = ("The charger reports an error, so the add-on paused the car until "
"it clears.")
nl = ("De laadpaal meldt een fout, dus de add-on pauzeert de auto tot die "
"verdwijnt.")
return Notice(ID_CHARGER_ERROR, WARNING, T_CHARGER_ERROR, en,
body_nl=f"{T_CHARGER_ERROR_NL}. {nl}")
def charger_error_gone() -> Dismiss:
"""EV-05: takes the 'Charger error, car paused' notification down."""
return Dismiss(ID_CHARGER_ERROR)
def row_car_over() -> str:
"""EV-04: the grey row while the car charge you set is over the peak limit."""
return Bi("The car charge you set takes this 15-minute period over the "
"peak limit.",
"De autolading die u instelde brengt dit kwartier boven de "
"piekgrens.")
def row_charger_other() -> str:
"""EV-04: the grey row, in Manual, while something else sets the current."""
return Bi("Something else changes the charger, so the add-on writes "
"nothing until you change it.",
"Iets anders wijzigt de laadpaal, dus de add-on schrijft niets "
"tot u iets wijzigt.")
def row_charger_stuck() -> str:
"""EV-04: the amber row when the charger's reading does not move."""
return Bi("The charger reading may be stuck, so check the charger.",
"De meting van de laadpaal staat mogelijk vast, dus controleer "
"de laadpaal.")
def row_charger_refused() -> str:
"""EV-04: the amber row when the charger does not take the setting."""
return Bi("The charger did not take the setting, so check the charger.",
"De laadpaal nam de instelling niet over, dus controleer de "
"laadpaal.")
def row_charger_phases() -> str:
"""EV-04: the amber row when the charger does not take the phases."""
return Bi("The charger did not take the phases, so check the charger.",
"De laadpaal nam de fasen niet over, dus controleer de "
"laadpaal.")
def row_charger_error(text) -> str:
"""EV-04: the grey row while the charger reports an error. Writes go on."""
t = " ".join(str(text or "").split())[:60]
return Bi(f"The charger reports an error: {t}.",
f"De laadpaal meldt een fout: {t}.")
def row_charger_setup() -> str:
"""EV-03: the amber row when the charger's entities are not found."""
return Bi("The add-on cannot find the charger, so check its entity in "
@@ -1423,6 +1500,10 @@ def why_waiting(missing_s) -> str:
HINTS = {
"control_started": "Control started",
"control_stopped": "Control stopped",
"car_mode": "Car mode set",
"car_current": "Car current set",
"car_phases": "Car phases set",
"car_sun_first": "Where spare sun goes first set",
"settings_saved": "Settings saved, they apply after a restart",
"restart_requested": "Restart requested from the settings page",
"setup_only": "In setup, nothing is sent to any inverter",
@@ -1511,6 +1592,20 @@ def pack_refused(why: str) -> str:
return PACK_REFUSED[why]
# EV-04: why a car mode, current or phases change was refused (the page and
# Home Assistant show it).
CAR_REFUSED = {
"off": "The car charger is not set up.",
"value": "That choice is not possible for the car charger.",
"phases": "The charger limit allows only one number of phases.",
"topic": "That is not a car command.",
}
def car_refused(why: str) -> str:
return CAR_REFUSED[why]
# MAINT-11: why a start or stop of ONE battery's cycle was refused. `{unit}` is
# the battery the sentence is about (for "busy", the one that is cycling). The
# page shows the same sentences in Dutch from app/ui_text, keyed by the code.
@@ -1703,6 +1798,12 @@ def status_samples() -> list:
("row_no_prices", AMBER, row_no_prices()),
("row_charger_unreach", AMBER, row_charger_unreach("09:12")),
("row_charger_writer", GREEN, row_charger_writer()),
("row_car_over", GREEN, row_car_over()),
("row_charger_other", GREEN, row_charger_other()),
("row_charger_error", GREEN, row_charger_error("Socket error")),
("row_charger_stuck", AMBER, row_charger_stuck()),
("row_charger_refused", AMBER, row_charger_refused()),
("row_charger_phases", AMBER, row_charger_phases()),
("row_charger_setup", AMBER, row_charger_setup()),
]
@@ -1740,6 +1841,8 @@ def samples() -> list:
no_prices(*_SINCE_OLDER),
no_prices(),
charger_unreachable("09:12"),
car_over("16"),
charger_error(),
]
@@ -1806,7 +1909,12 @@ LABELS = {
"ev_charger": "Charger",
"ev_current_entity": "Current setting entity",
"ev_max_a": "Charger limit",
"ev_batt_cover": "Batteries help with the peak",
"ev_mode_start": "Mode after a restart",
"ev_phases": "Phases",
"ev_margin_w": "Sun kept back",
"ev_pause_min": "Pause after",
"ev_start_min": "Start after",
}
@@ -1890,7 +1998,12 @@ LABELS_NL = {
"ev_charger": "Laadpaal",
"ev_current_entity": "Entiteit van de laadstroom",
"ev_max_a": "Laadpaalgrens",
"ev_batt_cover": "Batterijen helpen met de piek",
"ev_mode_start": "Modus na een herstart",
"ev_phases": "Fasen",
"ev_margin_w": "Zon achtergehouden",
"ev_pause_min": "Pauzeren na",
"ev_start_min": "Starten na",
}
# The inverter list shows two of them under a shorter name.
UNIT_LABELS_NL = {"setpoint_entity": "Setpoint-entiteit",
+123 -5
View File
@@ -144,6 +144,8 @@ OPTIONAL_SENSORS = [
("car_power", "goodwe_car_power", "Car power", "W", "power", "measurement", "mdi:car-electric"),
("car_state", "goodwe_car_state", "Car state", None, None, None, "mdi:ev-station"),
("car_today_kwh", "goodwe_car_today_kwh", "Car energy today", "kWh", "energy", "total_increasing", "mdi:ev-station"),
# EV-05: what of today's charge came from the sun (Solar mode only).
("car_today_solar_kwh", "goodwe_car_today_solar_kwh", "Car solar energy today", "kWh", "energy", "total_increasing", "mdi:solar-power"),
]
# ⚠️ HA's OWN "this sensor has no value" PAYLOAD, and the one place this add-on
@@ -200,7 +202,8 @@ def optional_keys(opts: dict) -> tuple:
from . import chargers as _ch # EV-03: same reason
out = ("pv",) if _pv.entities(opts) else ()
if _ch.census_entity(opts):
out += ("car_power", "car_state", "car_today_kwh")
out += ("car_power", "car_state", "car_today_kwh",
"car_today_solar_kwh")
return out
@@ -405,7 +408,7 @@ def _unit_places(names):
yield slug, device, prefix
def discovery_payloads(units=(), omit=(), include=(), modes=()) -> list:
def discovery_payloads(units=(), omit=(), include=(), modes=(), car=None) -> list:
"""Every `(topic, payload)` this add-on announces, in announcement order.
Split out of `_announce()` so that the acceptance criterion can be graded as
@@ -421,6 +424,8 @@ def discovery_payloads(units=(), omit=(), include=(), modes=()) -> list:
re-announces every entity on a live install).
`modes` (OPT-11 P2) is the battery modes offered, empty when they are off.
`car` (EV-04) is None, or `(max_a, phases)`: the car's three command
entities, announced after everything else so no existing row moves.
"""
omit = set(omit)
include = [k for k in include if k not in omit]
@@ -452,6 +457,7 @@ def discovery_payloads(units=(), omit=(), include=(), modes=()) -> list:
DEVICE, unit, dev_class, state_class, icon)))
# OPT-11 P2: last, and only when battery modes are on.
out.extend(mode_payloads(units, modes))
out.extend(car_payloads(car))
return out
@@ -518,6 +524,112 @@ def mode_payloads(units, modes) -> list:
return out
# --- EV-04: the car's mode, current and phases, as HA entities ----------------
# Announced only with a charger switched on, after every other row. A command
# goes through Controller.handle_action(); a retained one is dropped.
CAR_MODE_LABELS = {"off": "Off", "manual": "Manual", # English, pinned
"solar": "Solar"} # EV-05
# EV-05: where spare sun goes first; mirrors carmode.FIRST_LABELS (this module
# imports nothing from the package, test_ev05.py checks the two agree).
CAR_FIRST_LABELS = {"batteries": "Batteries", "car": "Car"}
CAR_MODES = tuple(CAR_MODE_LABELS)
CAR_CONFIGS_KEY = "mqtt_car_configs"
CAR_MIN_A = 6
_CAR_CMD_RE = re.compile(rf"{BASE}/car/(mode|current|phases|sun_first)/set")
_CAR_CONFIG_RE = re.compile(
rf"homeassistant/(select|number)/{BASE}_car_(mode|current|phases|sun_first)"
rf"/config")
# (key, component, name, icon)
CAR_ENTITIES = [
("mode", "select", "Car mode", "mdi:car-electric"),
("current", "number", "Car current", "mdi:current-ac"),
("phases", "select", "Car phases", "mdi:sine-wave"),
("sun_first", "select", "Car spare sun first", "mdi:solar-power"), # EV-05
]
def car_payloads(car) -> list:
"""The `(topic, payload)` for `select.goodwe_car_mode`,
`number.goodwe_car_current` and `select.goodwe_car_phases`. `car` is
`(max_a, phases)`; empty when it is None."""
if not car:
return []
max_a, phases = car
out = []
for key, component, name, icon in CAR_ENTITIES:
unique_id = f"{BASE}_car_{key}"
cfg = {
"name": name,
"object_id": f"goodwe_car_{key}",
"unique_id": unique_id,
"state_topic": f"{BASE}/car_{key}",
"command_topic": f"{BASE}/car/{key}/set",
}
if key == "mode":
cfg["options"] = list(CAR_MODE_LABELS.values())
elif key == "phases":
cfg["options"] = [str(n) for n in phases]
elif key == "sun_first":
cfg["options"] = list(CAR_FIRST_LABELS.values())
else:
cfg.update({"min": CAR_MIN_A, "max": int(max_a), "step": 1,
"unit_of_measurement": "A", "device_class": "current",
"mode": "box"})
cfg.update({"retain": False, "availability_topic": AVAILABILITY,
"device": DEVICE, "icon": icon})
out.append((f"homeassistant/{component}/{unique_id}/config", cfg))
return out
def car_configs(car, stored) -> tuple:
"""`(keep, retract)` at start-up, as `mode_configs()` does for the battery
modes: turning the charger off removes exactly the entities announced
before, and a site that never had one publishes nothing."""
current = [t for t, _ in car_payloads(car)]
old = [t for t in (stored if isinstance(stored, list) else [])
if isinstance(t, str) and _CAR_CONFIG_RE.fullmatch(t)
and t not in current]
old = list(dict.fromkeys(old))
return current + old, old
def parse_car_command(topic, payload, retained):
"""`(action, value, reject)` for one message on a car command topic.
`action` is `car_mode`, `car_current` or `car_phases`. A value that is
none of the entity's own is None (the action then refuses it)."""
m = _CAR_CMD_RE.fullmatch(topic) if isinstance(topic, str) else None
if m is None:
return None, None, "topic"
key = m.group(1)
action = f"car_{key}"
if bool(retained):
return action, None, "retained"
if not isinstance(payload, (bytes, bytearray)):
return action, None, "size"
if MAX_COMMAND_BYTES < len(payload):
return action, None, "size"
try:
text = bytes(payload).decode(encoding="utf-8").strip()
except ValueError: # UnicodeDecodeError is one
return action, None, "encoding"
value = None
if key == "mode":
value = next((k for k, v in CAR_MODE_LABELS.items() if v == text),
None)
elif key == "phases":
value = {"1": 1, "3": 3}.get(text)
elif key == "sun_first":
value = next((k for k, v in CAR_FIRST_LABELS.items() if v == text),
None)
else:
try:
f = float(text)
value = f if f == f and abs(f) < 1000 else None
except ValueError:
value = None
return action, value, None
def mode_retractions(stored, current) -> list:
"""Config topics announced before and not now: each gets an empty
retained config, which removes the entity from HA. Anything in the store
@@ -574,11 +686,13 @@ class MqttPublisher:
# test fixture that builds one with __new__) behaves as before.
modes = ()
retract = ()
car = None # EV-04: `(max_a, phases)` when the charger is on
_loop = None
_handler = None
def __init__(self, host, port, username=None, password=None, omit=(),
units=(), include=(), modes=(), retract=()):
units=(), include=(), modes=(), retract=(), car=None,
car_retract=()):
# `omit` drops sensor keys from discovery entirely. ⚠️ Announcing a
# sensor that nothing will ever publish to is not harmless here:
# p1_sample_age_s is a watchdog input, and an entity that exists but is
@@ -597,7 +711,8 @@ class MqttPublisher:
# OPT-11 P2: the modes offered (empty when battery modes are off), and
# the mode config topics to remove (`mode_retractions()`).
self.modes = tuple(modes)
self.retract = [str(t) for t in retract]
self.retract = [str(t) for t in retract] + [str(t) for t in car_retract]
self.car = tuple(car) if car else None
self.enabled = mqtt is not None and bool(host)
self.client = None
if not self.enabled:
@@ -636,7 +751,8 @@ class MqttPublisher:
# diffing what actually goes on the wire - and a payload built here
# instead would be one this add-on publishes and no check has ever seen.
for topic, cfg in discovery_payloads(self.units, self.omit,
self.include, self.modes):
self.include, self.modes,
self.car):
self.client.publish(topic, json.dumps(cfg), retain=True)
for topic in self.retract:
self.client.publish(topic, "", retain=True)
@@ -647,6 +763,8 @@ class MqttPublisher:
if self.modes:
for key in ("mode", "use"):
self.client.subscribe(f"{BASE}/unit/+/{key}/set")
if self.car:
self.client.subscribe(f"{BASE}/car/+/set")
def bind(self, loop, handler) -> None:
"""OPT-11 P2: hand each command to `handler(topic, payload, retained)`,
+50
View File
@@ -158,6 +158,54 @@
$("#car-today").textContent = c.today || "";
$("#car-today").hidden = !c.today;
$("#car-why").textContent = c.why;
renderCarControls(c);
}
// EV-04: Off and Manual; EV-05: Solar and where its spare sun goes first.
// The mode, the phases and the choice send at once; the current sends after
// two seconds of rest. A slider being dragged is left alone.
let carTouch = 0, carTimer = null, carBusy = false;
async function carAct(what, value) {
if (carBusy) return;
carBusy = true;
try {
const r = await fetch("action", { method: "POST", headers: { "Content-Type": "application/json" },
body: JSON.stringify({ action: what, value: value }) });
const j = await r.json().catch(() => ({}));
if (!r.ok) toast(j.error || t("toast.failed"));
} catch (e) { toast(t("toast.failed")); }
finally { carBusy = false; }
await refresh(true);
}
function renderCarControls(c) {
const modes = c.modes || [];
$("#car-mode").hidden = !modes.length;
$("#car-mode").replaceChildren(...modes.map((m) => h("button", {
type: "button", role: "radio", "aria-checked": String(c.mode === m),
onclick: () => carAct("car_mode", m) }, t("car.mode_" + m))));
$("#car-help").textContent = t("car.help_" + c.mode + ".description") || "";
const sol = c.mode === "solar" && !!c.first;
$("#car-solar").hidden = !sol;
if (sol) {
$("#car-first").replaceChildren(...c.first.choices.map((f) => h("button", {
type: "button", role: "radio", "aria-checked": String(c.first.value === f),
onclick: () => carAct("car_sun_first", f) }, t("car.first_" + f))));
}
const on = c.mode === "manual" && !!c.current;
$("#car-manual").hidden = !on;
if (!on) return;
const a = $("#car-a");
if (Date.now() - carTouch > 3000) {
a.min = c.current.min; a.max = c.current.max; a.value = c.current.value;
}
$("#car-a-out").textContent = a.value + " A";
a.oninput = () => {
carTouch = Date.now(); $("#car-a-out").textContent = a.value + " A";
clearTimeout(carTimer);
carTimer = setTimeout(() => carAct("car_current", Number(a.value)), 2000);
};
$("#car-phases").replaceChildren(...c.phases.choices.map((n) => h("button", {
type: "button", role: "radio", "aria-checked": String(c.phases.value === n),
onclick: () => carAct("car_phases", n) }, t("car.phases_" + n))));
}
/* ---------------- Home: today's plan ---------------- */
@@ -288,6 +336,8 @@
bar.className = pct >= 100 ? "bad" : pct >= 80 ? "warn" : "";
$("#peak-meter").setAttribute("aria-label", t("peak.this_month") + " " + (m.pct == null ? "–" : Math.round(m.pct) + " %"));
$("#peak-line").textContent = m.line;
$("#peak-car").textContent = m.car_line || ""; $("#peak-car").hidden = !m.car_line;
$("#peak-setby").textContent = m.set_by || ""; $("#peak-setby").hidden = !m.set_by;
}
function renderAttention() {
const list = S.attention;
+15 -2
View File
@@ -44,8 +44,19 @@
<div class="car-big" id="car-big"></div>
<div class="small muted" id="car-today"></div>
<div class="small car-lab" data-t="car.mode"></div>
<div class="seg" role="radiogroup" id="car-mode" data-t-label="car.mode"><button type="button" role="radio" aria-checked="true" data-t="car.mode_off"></button></div>
<p class="tiny muted" style="margin:6px 0 0" data-t="car.help_off.description"></p>
<div class="seg" role="radiogroup" id="car-mode" data-t-label="car.mode"></div>
<p class="tiny muted" style="margin:6px 0 0" id="car-help"></p>
<div id="car-manual" hidden>
<div class="small car-lab" data-t="car.current"></div>
<div class="slider"><input type="range" id="car-a" min="6" max="16" step="1" data-t-label="car.current"><output class="small" id="car-a-out"></output></div>
<div class="small car-lab" data-t="car.phases"></div>
<div class="seg" role="radiogroup" id="car-phases" data-t-label="car.phases"></div>
</div>
<div id="car-solar" hidden>
<div class="small car-lab" data-t="car.first"></div>
<div class="seg" role="radiogroup" id="car-first" data-t-label="car.first"></div>
<p class="tiny muted" style="margin:6px 0 0" data-t="car.first_help.description"></p>
</div>
<div class="car-why small"><span class="muted" data-t="car.why"></span><span id="car-why"></span></div>
</div>
@@ -71,6 +82,8 @@
<div class="row spread small" id="peak-figures"><span><span data-t="peak.this_month"></span>: <strong id="peak-now"></strong></span><span class="muted"><span data-t="peak.limit"></span> <span id="peak-limit"></span></span></div>
<div class="meter" id="peak-meter" role="img"><i style="width:0%"></i></div>
<div class="tiny muted" id="peak-line"></div>
<div class="tiny muted" id="peak-car" hidden></div>
<div class="tiny muted" id="peak-setby" hidden></div>
</div>
<div class="card" id="c-attn">
+40 -6
View File
@@ -4,7 +4,7 @@
"inverters": {"name": "Inverters and batteries", "description": "The inverters the add-on controls, and your solar."},
"tariff": {"name": "Tariff and prices", "description": "What you pay and are paid per kWh."},
"safety": {"name": "Safety limits", "description": "The peak limit, starting and stopping, and the safety stops."},
"car": {"name": "Car charger", "description": "Which charger the add-on reads, and its limits."},
"car": {"name": "Car charger", "description": "Which charger the add-on drives, its limits and the mode defaults."},
"maintenance": {"name": "Maintenance", "description": "The monthly battery cycle and the log."},
"tuning": {"name": "Control tuning", "description": "For support only, because these were measured on real hardware."}
},
@@ -36,6 +36,7 @@
"meter_source": {"off": "One grid power entity", "ha_dsmr": "Import and export entities", "mqtt_p1": "Meter over MQTT", "ha_signed": "One net power entity", "homewizard_local": "HomeWizard meter on the network"},
"ev_charger": {"off": "None", "alfen_ha": "Alfen (Home Assistant integration)"},
"ev_phases": {"1": "1 phase", "3": "3 phases", "auto": "1 and 3"},
"ev_mode_start": {"keep": "Keep the last mode", "off": "Off"},
"meter_phases": {"1": "1 phase", "3": "3 phases"},
"shadow_mode": {"auto": "Automatic", "on": "Always on", "off": "Off"},
"price_provider": {"generic_dayahead": "Day-ahead market price", "custom_formula": "Your own price formula", "manual_csv": "A price file", "price_service": "Your own price service"},
@@ -90,7 +91,7 @@
"loading": "Loading the forecast."
},
"peak": {"name": "Peak limit", "this_month": "This month's peak", "limit": "Limit", "none": "None recorded yet", "unreadable": "Cannot be read now"},
"car": {"name": "Car", "mode": "Mode", "mode_off": "Off", "help_off": {"description": "The add-on leaves the charger alone."}, "why": "Why"},
"car": {"name": "Car", "mode": "Mode", "mode_off": "Off", "mode_manual": "Manual", "help_off": {"description": "The add-on leaves the charger alone."}, "help_manual": {"description": "Charges at the current you set, whatever the sun or the peak limit do."}, "current": "Current", "phases": "Phases", "phases_1": "1 phase", "phases_3": "3 phases", "why": "Why", "mode_solar": "Solar", "help_solar": {"description": "Charges only from spare sun and pauses when there is too little."}, "first": "Spare sun goes first to", "first_batteries": "Batteries", "first_car": "Car", "first_help": {"description": "Batteries: the car gets sun only when the batteries charge at full power or are full."}},
"attention": {"name": "Needs attention", "nothing": "Nothing to look at", "to_look": "to look at", "details": "Details", "alarm": "Alarm", "warning": "Warning", "info": "Info"},
"control": {"name": "Control", "stop": "Stop control", "start": "Start control", "maint_start": "Start a battery cycle now", "maint_abort": "Stop the battery cycle", "docs": "Add-on documentation", "more": "More actions"},
"details": {"name": "Details for installers", "rows": "Status rows", "checks": "Checks", "event": "Last event"},
@@ -301,11 +302,11 @@
"warning": "See Needs attention below."
},
"car": {
"state": {"charging": "Charging", "waiting": "Connected, waiting", "none": "No car connected", "full": "Car is full", "unreach": "Charger not reachable", "setup": "Charger not set up", "fault": "Charger fault", "wait": "No reading yet"},
"big": {"waiting": "Connected, not charging.", "none": "Nothing to charge.", "full": "The car is full.", "seen": "Last seen at {t}.", "no_reading": "No reading.", "setup": "Not set up.", "fault": "The charger reports a fault.", "wait": "No reading yet."},
"state": {"charging": "Charging", "waiting": "Connected, waiting", "none": "No car connected", "full": "Car is full", "unreach": "Charger not reachable", "setup": "Charger not set up", "fault": "Charger fault", "wait": "No reading yet", "paused": "Waiting for sun"},
"big": {"waiting": "Connected, not charging.", "none": "Nothing to charge.", "full": "The car is full.", "seen": "Last seen at {t}.", "no_reading": "No reading.", "setup": "Not set up.", "fault": "The charger reports a fault.", "wait": "No reading yet.", "paused": "Waiting for spare sun."},
"phase_one": "1 phase",
"phase_many": "{n} phases",
"today": "{kwh} charged today.",
"today": "{kwh} charged today.", "today_sun": "{kwh} charged today, {sun} from the sun.", "and": "and",
"why": {
"charging": "The charger is charging the car. The add-on leaves it alone.",
"waiting": "The car is connected and not charging. The add-on leaves the charger alone.",
@@ -319,9 +320,36 @@
"limit": "The charger limit is above what the charger allows. Lower it in Settings.",
"name": "The current setting entity does not fit the charger. Check it in Settings.",
"fault": "The charger reports a fault. Check it at the charger itself.",
"wait": "Waiting for the first reading."
"wait": "Waiting for the first reading.",
"manual_set": "You set {a} A, {phases}. The charger keeps it, whatever the peak limit does.",
"manual_cover": "You set {a} A. The batteries give {kw} and help down to {pct}.",
"manual_over": "You set {a} A. The batteries are at {pct}, so this charge sets the peak.",
"manual_full": "You set {a} A. The batteries give all they can, so this charge sets the peak.",
"manual_nocover": "You set {a} A. The guard ignores the car, so this charge can set the peak.",
"manual_wait": "You set {a} A. It is set when a car is connected.",
"manual_would": "Shadow mode: the add-on would set {a} A, {phases}.",
"manual_stopped": "Control is stopped. The charger keeps its last setting.",
"manual_blocked": "The phases change once per 10 minutes at most. This waits.",
"solar_batt": "Batteries first: {a} at full power, {b} is full. The car gets the {kw} left, less {m} kept back.",
"solar_batt_room": "Batteries first: {a} at full power. The car gets the {kw} left, less {m} kept back.",
"solar_batt_full": "Batteries first, and the batteries are full. The car gets the {kw} left, less {m} kept back.",
"solar_car": "Car first: the car takes {kw} on {phases}. The batteries get the rest of the sun.",
"solar_hold": "Too little spare sun, so the car holds 6 A for now. It pauses after {s} minutes like this.",
"solar_paused": "Too little spare sun for the car's minimum of 6 A. It starts after {s} minutes of enough sun.",
"solar_start": "There is enough spare sun now. The car starts after {s} minutes of it.",
"solar_cut": "The car was cut first to stay under the peak limit. It starts again after {s} minutes of enough sun.",
"solar_unknown": "The add-on cannot measure the spare sun now. The car pauses if this lasts.",
"solar_would": "Shadow mode: the add-on would keep the car paused.",
"solar_stopped": "Control is stopped, so the add-on paused the car.",
"solar_error": "The charger reports an error, so the add-on paused the car.",
"solar_stuck": "The charger reading may be stuck, so the add-on paused the car.",
"solar_other": "Something else changes the charger, so the add-on leaves it alone."
}
},
"peak": {
"car": "This 15-minute period is heading for {kw}. The car takes {car} and the batteries cover {cov}.",
"set_by_car": "Set by the car charge you asked for, at {t}."
},
"tile": {
"not_set_up": "Not set up",
"no_reading": "No reading",
@@ -527,6 +555,12 @@
"solar_forecast": "Solar forecast",
"charger": "Charger not reachable",
"charger_writer": "Something else changes the charger",
"charger_other": "Something else changes the charger",
"charger_phases": "Charger did not take phases",
"charger_stuck": "Charger reading may be stuck",
"charger_refused": "Charger did not take it",
"charger_error": "The charger reports an error",
"car_over": "Car over the peak limit",
"charger_setup": "Charger not set up",
"none": "Inverter connection"
},
+40 -6
View File
@@ -4,7 +4,7 @@
"inverters": {"name": "Omvormers en batterijen", "description": "De omvormers die de add-on regelt, en uw zonnepanelen."},
"tariff": {"name": "Tarief en prijzen", "description": "Wat u per kWh betaalt en terugkrijgt."},
"safety": {"name": "Veiligheidsgrenzen", "description": "De piekgrens, starten en stoppen, en de veiligheidsstops."},
"car": {"name": "Laadpaal", "description": "Welke laadpaal de add-on leest, en haar grenzen."},
"car": {"name": "Laadpaal", "description": "Welke laadpaal de add-on stuurt, haar grenzen en de standaardmodus."},
"maintenance": {"name": "Onderhoud", "description": "De maandelijkse batterijcyclus en het logboek."},
"tuning": {"name": "Afstelling van de regeling", "description": "Alleen voor support, want deze zijn gemeten op echte hardware."}
},
@@ -36,6 +36,7 @@
"meter_source": {"off": "Eén entiteit voor netvermogen", "ha_dsmr": "Entiteiten voor afname en injectie", "mqtt_p1": "Meter via MQTT", "ha_signed": "Eén entiteit voor nettovermogen", "homewizard_local": "HomeWizard-meter op het netwerk"},
"ev_charger": {"off": "Geen", "alfen_ha": "Alfen (Home Assistant-integratie)"},
"ev_phases": {"1": "1 fase", "3": "3 fasen", "auto": "1 en 3"},
"ev_mode_start": {"keep": "Laatste modus houden", "off": "Uit"},
"meter_phases": {"1": "1 fase", "3": "3 fasen"},
"shadow_mode": {"auto": "Automatisch", "on": "Altijd aan", "off": "Uit"},
"price_provider": {"generic_dayahead": "Day-aheadprijs van de markt", "custom_formula": "Uw eigen prijsformule", "manual_csv": "Een prijsbestand", "price_service": "Uw eigen prijsdienst"},
@@ -87,7 +88,7 @@
"loading": "De prognose wordt geladen."
},
"peak": {"name": "Piekgrens", "this_month": "Piek van deze maand", "limit": "Grens", "none": "Nog niets gemeten", "unreadable": "Nu niet leesbaar"},
"car": {"name": "Auto", "mode": "Modus", "mode_off": "Uit", "help_off": {"description": "De add-on laat de laadpaal met rust."}, "why": "Waarom"},
"car": {"name": "Auto", "mode": "Modus", "mode_off": "Uit", "mode_manual": "Handmatig", "help_off": {"description": "De add-on laat de laadpaal met rust."}, "help_manual": {"description": "Laadt met de stroom die u instelt, wat de zon of de piekgrens ook doen."}, "current": "Stroom", "phases": "Fasen", "phases_1": "1 fase", "phases_3": "3 fasen", "why": "Waarom", "mode_solar": "Zon", "help_solar": {"description": "Laadt alleen met zonne-overschot en pauzeert als er te weinig is."}, "first": "Zonne-overschot gaat eerst naar", "first_batteries": "Batterijen", "first_car": "Auto", "first_help": {"description": "Batterijen: de auto krijgt pas zon als de batterijen op vol vermogen laden of vol zijn."}},
"attention": {"name": "Vraagt aandacht", "nothing": "Niets om na te kijken", "to_look": "na te kijken", "details": "Details", "alarm": "Alarm", "warning": "Waarschuwing", "info": "Info"},
"control": {"name": "Regeling", "stop": "Regeling stoppen", "start": "Regeling starten", "maint_start": "Nu een batterijcyclus starten", "maint_abort": "Batterijcyclus stoppen", "docs": "Documentatie van de add-on", "more": "Meer acties"},
"details": {"name": "Details voor installateurs", "rows": "Statusregels", "checks": "Controles", "event": "Laatste gebeurtenis"},
@@ -255,11 +256,11 @@
"pill": {"running": "Actief", "shadow": "Schaduwmodus", "stopped": "Gestopt", "alarm": "Heeft u nu nodig", "waiting": "Wacht op Home Assistant", "warning": "Actief, met een waarschuwing"},
"banner_sub": {"running": "De batterijen volgen het plan hieronder.", "shadow": "De plannen hieronder tonen wat de add-on zou doen.", "stopped": "Start de regeling hieronder als u klaar bent.", "alarm": "Zie Vraagt aandacht hieronder voor wat u moet doen.", "waiting": "De regeling gaat vanzelf verder zodra Home Assistant antwoordt.", "warning": "Zie Vraagt aandacht hieronder."},
"car": {
"state": {"charging": "Laadt", "waiting": "Aangesloten, wacht", "none": "Geen auto aangesloten", "full": "Auto is vol", "unreach": "Laadpaal onbereikbaar", "setup": "Laadpaal niet ingesteld", "fault": "Laadpaalstoring", "wait": "Nog geen meting"},
"big": {"waiting": "Aangesloten, laadt niet.", "none": "Niets te laden.", "full": "De auto is vol.", "seen": "Laatst gezien om {t}.", "no_reading": "Geen meting.", "setup": "Niet ingesteld.", "fault": "De laadpaal meldt een storing.", "wait": "Nog geen meting."},
"state": {"charging": "Laadt", "waiting": "Aangesloten, wacht", "none": "Geen auto aangesloten", "full": "Auto is vol", "unreach": "Laadpaal onbereikbaar", "setup": "Laadpaal niet ingesteld", "fault": "Laadpaalstoring", "wait": "Nog geen meting", "paused": "Wacht op zon"},
"big": {"waiting": "Aangesloten, laadt niet.", "none": "Niets te laden.", "full": "De auto is vol.", "seen": "Laatst gezien om {t}.", "no_reading": "Geen meting.", "setup": "Niet ingesteld.", "fault": "De laadpaal meldt een storing.", "wait": "Nog geen meting.", "paused": "Wacht op zonne-overschot."},
"phase_one": "1 fase",
"phase_many": "{n} fasen",
"today": "Vandaag {kwh} geladen.",
"today": "Vandaag {kwh} geladen.", "today_sun": "Vandaag {kwh} geladen, {sun} van de zon.", "and": "en",
"why": {
"charging": "De laadpaal laadt de auto. De add-on laat haar met rust.",
"waiting": "De auto is aangesloten en laadt niet. De add-on laat de laadpaal met rust.",
@@ -273,9 +274,36 @@
"limit": "De laadpaalgrens is hoger dan de laadpaal toestaat. Verlaag ze bij Instellingen.",
"name": "De entiteit van de laadstroom past niet bij de laadpaal. Controleer ze bij Instellingen.",
"fault": "De laadpaal meldt een storing. Controleer ze aan de laadpaal zelf.",
"wait": "Wacht op de eerste meting."
"wait": "Wacht op de eerste meting.",
"manual_set": "U stelde {a} A in, {phases}. De laadpaal houdt dit aan, wat de piekgrens ook doet.",
"manual_cover": "U stelde {a} A in. De batterijen leveren {kw} en helpen tot {pct}.",
"manual_over": "U stelde {a} A in. De batterijen staan op {pct}, dus deze lading bepaalt de piek.",
"manual_full": "U stelde {a} A in. De batterijen geven alles, dus deze lading bepaalt de piek.",
"manual_nocover": "U stelde {a} A in. De bewaking negeert de auto, dus deze lading kan de piek bepalen.",
"manual_wait": "U stelde {a} A in. Het wordt ingesteld zodra een auto is aangesloten.",
"manual_would": "Schaduwmodus: de add-on zou {a} A instellen, {phases}.",
"manual_stopped": "De regeling is gestopt. De laadpaal houdt haar laatste instelling.",
"manual_blocked": "De fasen wisselen hooguit eens per 10 minuten. Dit wacht.",
"solar_batt": "Eerst de batterijen: {a} op vol vermogen, {b} is vol. De auto krijgt de {kw} die overblijft, min {m} marge.",
"solar_batt_room": "Eerst de batterijen: {a} op vol vermogen. De auto krijgt de {kw} die overblijft, min {m} marge.",
"solar_batt_full": "Eerst de batterijen, en die zijn vol. De auto krijgt de {kw} die overblijft, min {m} marge.",
"solar_car": "Eerst de auto: die neemt {kw} op {phases}. De batterijen krijgen de rest van de zon.",
"solar_hold": "Te weinig zonne-overschot, dus de auto houdt nu 6 A. Na {s} minuten zo pauzeert ze.",
"solar_paused": "Te weinig zonne-overschot voor het minimum van de auto, 6 A. Ze start na {s} minuten genoeg zon.",
"solar_start": "Er is nu genoeg zonne-overschot. De auto start na {s} minuten daarvan.",
"solar_cut": "De auto werd eerst teruggeschroefd voor de piekgrens. Ze start weer na {s} minuten genoeg zon.",
"solar_unknown": "De add-on kan het zonne-overschot nu niet meten. De auto pauzeert als dit duurt.",
"solar_would": "Schaduwmodus: de add-on zou de auto gepauzeerd houden.",
"solar_stopped": "De regeling is gestopt, dus de add-on pauzeert de auto.",
"solar_error": "De laadpaal meldt een fout, dus de add-on pauzeert de auto.",
"solar_stuck": "De laadpaal meet mogelijk niet meer, dus de add-on pauzeert de auto.",
"solar_other": "Iets anders wijzigt de laadpaal, dus de add-on laat haar met rust."
}
},
"peak": {
"car": "Dit kwartier gaat richting {kw}. De auto neemt {car} en de batterijen dekken {cov}.",
"set_by_car": "Bepaald door de autolading die u vroeg, om {t}."
},
"tile": {"not_set_up": "Niet ingesteld", "no_reading": "Geen meting", "producing": "Produceert", "not_producing": "Produceert niet", "needs_solar": "Zonnemeting nodig", "not_adding_up": "Metingen kloppen niet", "using": "Verbruikt", "taking": "Neemt af van het net", "feeding": "Injecteert", "balanced": "In evenwicht", "giving": "Levert stroom", "charging": "Laadt", "resting": "Rust"},
"now": {
"no_reading": "Geen meting van deze batterij.",
@@ -448,6 +476,12 @@
"solar_forecast": "Zonneprognose",
"charger": "Laadpaal onbereikbaar",
"charger_writer": "Iets anders wijzigt de laadpaal",
"charger_other": "Iets anders wijzigt de laadpaal",
"charger_phases": "Laadpaal nam fasen niet over",
"charger_stuck": "Laadpaalmeting staat mogelijk vast",
"charger_refused": "Laadpaal nam het niet over",
"charger_error": "De laadpaal meldt een fout",
"car_over": "Auto boven de piekgrens",
"charger_setup": "Laadpaal niet ingesteld",
"none": "Verbinding met de omvormer"
},
+7 -2
View File
@@ -223,8 +223,8 @@ GROUPS = (
Field("delivery_hold_s", LOCKED, "s", step=5, show=_SEVERAL),
), collapsed=True),
)),
# EV-03: the car charger, read only. Everything after the choice shows
# only while a charger is switched on.
# EV-03: the car charger. Everything after the choice shows only while a
# charger is switched on. EV-04 adds the battery switch and the restart mode.
Group("car", (
Part("", (
Field("ev_charger", CHOICE, simple=True),
@@ -232,6 +232,11 @@ GROUPS = (
show=_CAR),
Field("ev_max_a", SLIDER, "A", simple=True, show=_CAR),
Field("ev_phases", SEGMENTED, simple=True, show=_CAR),
Field("ev_batt_cover", TOGGLE, simple=True, show=_CAR),
Field("ev_mode_start", SEGMENTED, simple=True, show=_CAR),
Field("ev_margin_w", SLIDER, "W", step=10, show=_CAR),
Field("ev_start_min", SLIDER, "min", show=_CAR),
Field("ev_pause_min", SLIDER, "min", show=_CAR),
)),
)),
Group("maintenance", (
+11
View File
@@ -688,6 +688,17 @@ def _charger_problems(opts: dict, writers: dict) -> list[str]:
out.append(f"{S('ev_max_a')} is {messages.shown(opts.get('ev_max_a'))}"
f". Set it from {chargers.MIN_A:.0f} to "
f"{chargers.ENTITY_MAX_A:.0f} A.")
# EV-05: Solar's sun kept back and its two dwells, each in its range.
for key, (lo, hi) in chargers.SOLAR_RANGES.items():
raw = opts.get(key, chargers.EV_OPTION_DEFAULTS[key])
try:
v = float(raw)
ok = not isinstance(raw, bool) and v == v and lo <= v <= hi
except (TypeError, ValueError):
ok = False
if not ok:
out.append(f"{S(key)} is {messages.shown(raw)}. Set it from {lo} "
f"to {hi}.")
entity = chargers.census_entity(opts)
if entity and drivers.census_key(entity) in writers:
out.append(f"{S('ev_current_entity')} is {entity}, which an inverter "
+10
View File
@@ -62,6 +62,7 @@ _LOG = logging.getLogger("goodwe.web")
# OPT-11: the per-battery actions, which name a battery and a value.
PACK_ACTIONS = ("pack_use", "pack_mode", "pack_sell")
CAR_ACTIONS = ("car_mode", "car_current", "car_phases", "car_sun_first")
# MAINT-11: start or stop one battery's maintenance cycle (the unit is optional).
MAINT_ACTIONS = ("maint_start", "maint_abort")
@@ -176,6 +177,15 @@ def build_app(controller, selfcfg=None) -> web.Application:
return web.json_response({"ok": False,
"error": result["error"]},
status=400)
elif what in CAR_ACTIONS:
# EV-04: the car's mode, current or phases. Store state, applied by
# the writer's next step; nothing is written to the charger here.
result = await controller.handle_action(
what, value=body.get("value"))
if isinstance(result, dict) and "error" in result:
return web.json_response({"ok": False,
"error": result["error"]},
status=400)
elif what in MAINT_ACTIONS and body.get("unit") is not None:
# MAINT-11: one battery's cycle. No unit = the old bare call below.
result = await controller.handle_action(what, unit=body["unit"])
+19 -5
View File
@@ -1,5 +1,5 @@
name: GoodWe RS485 Controller
version: "0.23.0"
version: "0.24.0"
slug: goodwe_controller
description: >-
Drives a GoodWe ES/BP battery inverter over its RS485 EMS port by sending it a
@@ -873,16 +873,25 @@ options:
shadow_mode: "auto"
# ==========================================================================
# CAR CHARGER - read only (EV-03)
# CAR CHARGER (EV-03 reads it, EV-04 adds Manual, EV-05 Solar)
# ==========================================================================
# `off` is the shipped value and means NO CHANGE AT ALL: nothing is read,
# shown or announced, and the House tile and the house profile are as before.
# `alfen_ha` reads the charger through its Home Assistant integration. THIS
# VERSION NEVER WRITES TO THE CHARGER; later cards add the modes.
# `alfen_ha` drives the charger through its Home Assistant integration. The
# mode (Off, Manual or Solar), the current, the phases and where spare sun
# goes first are runtime state in the store, not options. `ev_batt_cover`:
# the batteries help with the peak while the car charges. `ev_mode_start`:
# the mode after a restart. Solar: `ev_margin_w` sun kept back, and the car
# starts after `ev_start_min` of enough sun and pauses after `ev_pause_min`.
ev_charger: "off"
ev_current_entity: ""
ev_max_a: 16
ev_phases: "auto"
ev_batt_cover: true
ev_mode_start: "keep"
ev_margin_w: 100
ev_start_min: 2
ev_pause_min: 5
# ==========================================================================
# ADVANCED - the control law and diagnostics
@@ -1262,7 +1271,7 @@ schema:
shadow_mode: list(auto|on|off)
# ==========================================================================
# CAR CHARGER - read only (EV-03)
# CAR CHARGER (EV-03 reads it, EV-04 adds Manual, EV-05 Solar)
# ==========================================================================
# `ev_current_entity` is the charger's current setpoint; the other entities
# are found from its name. `ev_max_a` may not exceed the charger's own station
@@ -1271,6 +1280,11 @@ schema:
ev_current_entity: str?
ev_max_a: int(6,40)
ev_phases: list(1|3|auto)
ev_batt_cover: bool
ev_mode_start: list(keep|off)
ev_margin_w: int(0,1000)
ev_start_min: int(1,30)
ev_pause_min: int(1,30)
# ==========================================================================
# ADVANCED - the control law and diagnostics
+17 -11
View File
@@ -185,7 +185,9 @@ def callers_of_writes():
out = []
for root, _d, files in os.walk(os.path.join(HERE, "app")):
for f in files:
if not f.endswith(".py") or f == "chargers.py":
# EV-04: carmode.py is the one place that writes, and only in
# Manual (test_ev04.py grades it); chargers.py is the seam.
if not f.endswith(".py") or f in ("chargers.py", "carmode.py"):
continue
tree = ast.parse(io.open(os.path.join(root, f),
encoding="utf-8").read())
@@ -199,15 +201,17 @@ def callers_of_writes():
return out
check(f"nothing in the add-on calls write_current, write_phases or the "
f"charger's release ({callers_of_writes()})", not callers_of_writes())
check(f"nothing in the add-on but carmode.py calls write_current, "
f"write_phases or the charger's release ({callers_of_writes()})",
not callers_of_writes())
check("the seam does define them (the next cards use them)",
all(hasattr(CH.ChargerDriver, m) for m in
("write_current", "write_phases", "release")))
_ha = FakeHa(SimCharger())
asyncio.run(CH.AlfenHaDriver(SET, 16).bind(_ha).write_current(99))
check("the Alfen driver's write (a later card's) is clamped to the charger "
"limit, 16 A and not 99", _ha.sets == [(SET, 16.0)])
_took99 = asyncio.run(CH.AlfenHaDriver(SET, 16).bind(_ha).write_current(99))
check("the Alfen driver never sends 99 A against a 16 A limit (EV-04: a value "
"above the clamp is a software fault, not sent)",
_ha.sets == [] and _took99 is False)
# --------------------------------------------------------------------------- #
print("\n2. THE SEAM")
@@ -901,16 +905,18 @@ check("it stays for an hour and then goes",
# --------------------------------------------------------------------------- #
print("\n9. THE MQTT SENSORS")
# --------------------------------------------------------------------------- #
check("the three car sensors are announced only with a charger on",
check("the car sensors (EV-05: four, with today's solar kWh) are announced "
"only with a charger on",
mqtt.optional_keys(CAR) == ("pv", "car_power", "car_state",
"car_today_kwh")
"car_today_kwh", "car_today_solar_kwh")
and mqtt.optional_keys(BASE) == ("pv",))
pl = dict(mqtt.discovery_payloads(include=mqtt.optional_keys(CAR)))
names = sorted(k for k in pl if "_car_" in k)
check(f"discovery announces three sensors, goodwe_car_power, "
f"goodwe_car_state and goodwe_car_today_kwh ({names})",
check(f"discovery announces the sensors goodwe_car_power, goodwe_car_state, "
f"goodwe_car_today_kwh and (EV-05) goodwe_car_today_solar_kwh ({names})",
[pl[k]["object_id"] for k in names] == [
"goodwe_car_power", "goodwe_car_state", "goodwe_car_today_kwh"]
"goodwe_car_power", "goodwe_car_state", "goodwe_car_today_kwh",
"goodwe_car_today_solar_kwh"]
and all(k.startswith("homeassistant/sensor/") for k in names))
check("...and no command entity (no select, number or switch for the car)",
not [k for k in pl if "car" in k and not k.startswith(
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
+421
View File
@@ -0,0 +1,421 @@
"""EV-05: the car's Solar mode, the long runs. `python3 -B test_ev05_long.py`
Split from test_ev05.py so CI's parallel batch stays short: the shadow-mode
twin (T39), the acceptance day (T44), the fuzz (T45), and the hour-long
"nothing else changes" comparisons (T50, T51). Same harness,
`tools/ev05_sun.py`; the rows are named by their test-plan id.
Mutating a module this file grades? Read MUTATION.md first (purge __pycache__).
"""
import logging
import math
import os
import random
import sys
HERE = os.path.dirname(os.path.abspath(__file__))
sys.path.insert(0, os.path.join(HERE, "tools"))
import ev05_sun as S # noqa: E402
from chargersim import SimCharger # noqa: E402
logging.disable(logging.CRITICAL)
fails = []
def check(name, cond):
print(f" {'ok ' if cond else 'FAIL'} {name}")
if not cond:
fails.append(name)
def const(w):
return lambda t: float(w)
def steps(*pairs):
def f(t):
v = pairs[0][1]
for at, w in pairs:
if t >= at:
v = w
return float(v)
return f
def cur(r):
return S.writes(r, "current")
def ph(r):
return S.writes(r, "phases")
FULL = {"a": 100.0, "b": 100.0}
ABLE = {"a": 60.0, "b": 60.0}
def quarters(r, aim):
"""(start, import average, car average) of each whole quarter."""
out = []
tr = r["trace"]
for q0 in range(0, int(tr[-1]["t"]) + 1 - 900, 900):
xs = [x for x in tr if q0 <= x["t"] < q0 + 900]
if len(xs) < 890:
continue
g = sum(max(0.0, x["grid"]) for x in xs) / len(xs)
car = sum(x["car"] for x in xs) / len(xs)
out.append((q0, g, car))
return out
def seq_ok(r):
"""Every select: a 0 A write before it, the car under 100 W or out of C or
20 s after the 0 A, then 10 s or more to the next current; no other write
in between."""
log = r["sim"].log
state = {x["t"]: x["st"] for x in r["trace"]}
bad = []
for i, x in enumerate(log):
if x[1] != "phases":
continue
prev = log[i - 1] if i else None
nxt = log[i + 1] if i + 1 < len(log) else None
if prev is None or prev[1] != "current" or prev[2] != 0.0:
bad.append(("no 0 A before", x))
continue
quiet = (x[3] < 100.0 or state.get(x[0] - 1) != "C"
or x[0] - prev[0] >= 20.0)
if not quiet or x[4] != 0.0:
bad.append(("select under load", x))
if nxt is not None and (nxt[1] != "current" or nxt[0] - x[0] < 10.0):
bad.append(("current too soon or not next", x, nxt))
return bad
def inv_sets(r):
return [x for x in r["plant"].sets if x[1].startswith("number.sp_")]
# =========================================================================== #
print("\nT39. SHADOW MODE: NOTHING WRITTEN, THE CARD SAYS WHAT IT WOULD SET (N10)")
# =========================================================================== #
def cloudy(t):
k = int(t) // 240
return 900.0 + (2600.0 if k % 3 else 400.0) + 300.0 * (k % 5)
twin = S.drive(house=const(500.0), sun=cloudy, first="car", socs=FULL,
opts={"ev_phases": "1"}, dur=3600)
for name, kw in (("on", dict(opts={"ev_phases": "1", "shadow_mode": "on"})),
("auto, control stopped",
dict(opts={"ev_phases": "1", "shadow_mode": "auto"},
events={0: lambda p, c: setattr(c, "auto", False)}))):
sh = S.drive(house=const(500.0), sun=cloudy, first="car", socs=FULL,
dur=3600, **kw)
diff = [(a["t"], a["a"], (b["would"] or (None,))[0])
for a, b in zip(twin["trace"], sh["trace"])
if b["would"] is not None and a["a"] != b["would"][0]]
check(f"T39 shadow {name}: the charger log is empty for a cloudy hour, and "
f"every second the card's 'would set' is the current of a twin run "
f"without shadow mode ({len(diff)} seconds differ: {diff[:3]})",
sh["sim"].log == [] and not diff
and len({a['a'] for a in twin['trace']}) >= 3)
# =========================================================================== #
print("\nT50, T51. NOTHING ELSE CHANGES FOR THE GUARD AND THE ZERO-GRID LOOP")
# =========================================================================== #
h50 = steps((0, 400.0), (600, 2600.0), (900, 800.0), (1800, 4200.0),
(2100, 300.0), (3000, 1500.0))
r50 = S.drive(house=h50, sun=const(0.0), plug=False, dur=3600)
r50o = S.drive(house=h50, sun=const(0.0), plug=False, dur=3600,
opts={"ev_charger": "off"})
check(f"T50: Solar with no car for an hour: the guard's floor and every battery "
f"command are identical to the run with no charger "
f"({len(inv_sets(r50))} commands)", inv_sets(r50) == inv_sets(r50o)
and [x["floor"] for x in r50["trace"]]
== [x["floor"] for x in r50o["trace"]] and cur(r50) == [])
sun51 = steps((0, 3000.0), (700, 5200.0), (1500, 2500.0))
r51 = S.drive(house=const(400.0), sun=sun51, first="car", socs=ABLE,
dur=2000)
carp = {int(x["t"]): x["car"] for x in r51["trace"]}
r51o = S.drive(house=lambda t: 400.0 + carp.get(math.ceil(t), 0.0),
sun=sun51, socs=ABLE, dur=2000, opts={"ev_charger": "off"})
check(f"T51: Car first, the zero-grid loop: the same meter series with the car "
f"as a Solar car and as house load gives the same battery commands "
f"({len(inv_sets(r51))} commands)", inv_sets(r51) == inv_sets(r51o)
and max(carp.values()) > 3000)
check("T51: the batteries charge with what the car leaves (Car first)",
-300 <= r51["plant"].batt(1999) <= 0)
# =========================================================================== #
print("\nT44. THE ACCEPTANCE DAY: 08:00-18:00, CLOUDS, HOUSE STEPS (A2)")
# =========================================================================== #
_rnd44 = random.Random(44)
CLOUDS44 = []
for _i in range(12):
a = _rnd44.randint(600, 34000)
CLOUDS44.append((a, a + _rnd44.randint(60, 480)))
STEPS44 = [(8000, 8300), (17000, 17300), (26000, 26300)]
def sun44(t):
base = max(0.0, 7500.0 * math.sin(math.pi * t / 36000.0))
return base * (0.15 if any(a <= t < b for a, b in CLOUDS44) else 1.0)
def house44(t):
w = 1450.0 + 1050.0 * math.sin(t / 1700.0)
return w + (3000.0 if any(a <= t < b for a, b in STEPS44) else 0.0)
long44 = sum(1 for a, b in CLOUDS44 if b - a > 300)
for first, race in (("batteries", False), ("car", True)):
# The batteries' levels move with their charge (A 15.36 kWh, B 20.48 kWh),
# so with Batteries first the car gets sun once they are full.
r44 = S.drive(house=house44, sun=sun44, first=first, socs={"a": 40.0,
"b": 60.0},
caps={"a": 15.36, "b": 20.48}, dur=36000, race=race)
# On the harness clock, as the trace (the model's own clock runs ahead).
w44 = [(x[0], x[2]) for x in r44["plant"].wlog if x[1] == "current"]
p44 = [(x[0], x[2]) for x in r44["plant"].wlog if x[1] == "phases"]
# A phase change's own 0 A (a select follows within 25 s) is not a pause.
seq0 = {t for t, v in w44 if v == 0.0 and any(0 < pt - t <= 25
for pt, _n in p44)}
starts, pauses, paused, pause_t = 0, 0, True, []
for t, v in w44:
if v == 0.0 and t not in seq0:
paused = True
pauses += 1
pause_t.append(t)
elif v > 0 and paused:
starts += 1
paused = False
why_at = {x["t"]: x["why"] for x in r44["trace"]}
cut_t = [t for t in pause_t if why_at.get(t) == "cut"
or why_at.get(t - 1) == "cut"]
# Car first: no hold pause from a cloud under 300 s. Batteries first: a
# battery that gave power in the cloud is under 100 % again, so its
# rating is room and the car waits for it (the brief's room rule).
short_hit = [t for t in pause_t if t not in cut_t and first == "car"
and any(a <= t <= b + 2 for a, b in CLOUDS44 if b - a <= 300)]
print(f" pauses (second, why): {[(t, why_at.get(t)) for t in pause_t]}")
# N5 on the whole day: a start 120 s or more after its pause, a hold
# pause after 300 s of holding, non-zero writes 30 s apart.
nz = [t for t, v in w44 if v > 0]
n5 = [("30 s", b) for a, b in zip(nz, nz[1:]) if b - a < 30]
last_p = None
for t, v in w44:
if v == 0.0 and t not in seq0:
last_p = t
elif v > 0 and last_p is not None:
if t - last_p < 120:
n5.append(("start", t))
last_p = None
for t in pause_t:
if why_at.get(t) == "paused":
run = 0
while why_at.get(t - 1 - run) == "hold":
run += 1
if run < 298:
n5.append(("pause", t, run))
# The loop turns at most `slew_w` per cycle, so for some 15 s after each
# current step, cloud edge and house step the grid covers the change:
# counted apart (dev report). The rest is the car on grid power while
# the loop is settled, outside the holds.
edges = [t for t, v in w44] + [e for ab in CLOUDS44 + STEPS44 for e in ab]
edges.sort()
def settling(t):
return any(0 <= t - e < 15 for e in edges)
grid_wh = sum(min(x["car"], max(0.0, x["grid"])) for x in r44["trace"]
if x["why"] not in ("hold",) and not settling(x["t"])) / 3600.0
slew_wh = sum(min(x["car"], max(0.0, x["grid"])) for x in r44["trace"]
if settling(x["t"])) / 3600.0
steps44 = edges
over44 = [(q, round(g)) for q, g, car in quarters(r44, 3400.0)
if g > 3410.0 and g - car <= 3410.0]
gaps = [b[0] - a[0] for a, b in zip(p44, p44[1:])]
check(f"T44 {first} first ({'race' if race else 'step'}): starts {starts} "
f"(<= 1 + {long44} long clouds + {len(cut_t)} peak cuts, Car first)"
f"; pauses {pauses}; N5 dwells {n5[:3]}; selects {len(p44)} "
f"(gaps >= 600 s: {gaps[:4]}); no pause from a short cloud "
f"{short_hit[:3]}; the car's grid energy outside holds {grid_wh:.1f} "
f"Wh (and {slew_wh:.1f} Wh in the loop's 15 s after "
f"{len(steps44)} steps and edges); quarters over the aim by the car "
f"{over44}",
starts >= 1 and not n5 and all(g >= 600 for g in gaps)
and (first != "car" or starts <= 1 + long44 + len(cut_t))
and not seq_ok(r44) and not short_hit and grid_wh <= 10.0
and not over44)
# =========================================================================== #
print("\nT45. THE FUZZ: 14 SITES, 16800 STEPS (N1-N10)")
# The plan asks 14 x 400 steps; a busy site rarely has the 60 s calm a start
# needs, so each site runs 1200 steps to make enough writes to judge.
# =========================================================================== #
def fuzz(seed):
rnd = random.Random(seed)
stations = [10.0, 13.0, 16.0]
st = {"sun": rnd.uniform(0, 9000), "house": rnd.uniform(200, 3000),
"n": {}, "acts": [], "undo": [], "exits": []}
def exit_check(p, c):
"""N9: Solar to Off with the charger above 0 A, reachable, taking
writes and not held by another writer: a 0 A must follow."""
ch = p.ch
if c.car_mode == "solar" and not c.car_solar.hold \
and not ch.unavailable and ch.refuse is None \
and ch.readback_a > 0.5 and not p.ha_down:
st["exits"].append(p.t)
def later(p, fn):
st["undo"].append((p.t + rnd.randint(10, 40), fn))
def ev(p, c):
for due in [u for u in st["undo"] if u[0] <= p.t]:
st["undo"].remove(due)
due[1]()
if st.get("back") is not None and p.t >= st["back"]:
st["back"] = None # the user goes back to Solar
st["acts"].append(p.t)
return c.handle_action("car_mode", value="solar")
if st.get("press") is not None and p.t >= st["press"]:
st["press"] = None # the user presses the mode
st["acts"].append(p.t)
return c.handle_action("car_mode", value=c.car_mode)
r = rnd.random()
ch = p.ch
if r < 0.012:
st["sun"] = rnd.choice([0.0, 1000.0, 2500.0, 5000.0, 8000.0,
8000.0, 6500.0])
elif r < 0.02:
st["house"] = rnd.uniform(200, 4000)
elif r < 0.08:
st["sun"] = max(0.0, st["sun"] + rnd.uniform(-600, 600))
elif r < 0.082:
if ch.state != "A":
ch.unplug()
later(p, ch.plug_in)
st["n"]["plug"] = st["n"].get("plug", 0) + 1
elif r < 0.084:
ch.go_unavailable(True)
later(p, lambda: ch.go_unavailable(False))
st["n"]["down"] = st["n"].get("down", 0) + 1
elif r < 0.087:
ch.set_current(rnd.randint(0, 16))
st["n"]["other"] = st["n"].get("other", 0) + 1
st["press"] = p.t + rnd.randint(20, 90)
elif r < 0.089:
ch.refuse = rnd.choice(["ignore", "error"])
later(p, lambda: setattr(ch, "refuse", None))
elif r < 0.091:
p.meter_on = False
later(p, lambda: setattr(p, "meter_on", True))
st["n"]["meter"] = st["n"].get("meter", 0) + 1
elif r < 0.093:
c.o["shadow_mode"] = "on"
later(p, lambda: c.o.__setitem__("shadow_mode", "off"))
st["n"]["shadow"] = st["n"].get("shadow", 0) + 1
elif r < 0.095:
c.auto = False
later(p, lambda: setattr(c, "auto", True))
st["n"]["stop"] = st["n"].get("stop", 0) + 1
elif r < 0.098:
m = rnd.choice(["solar", "solar", "solar", "off", "manual"])
st["n"]["mode"] = st["n"].get("mode", 0) + 1
st["acts"].append(p.t)
if m == "off":
exit_check(p, c)
return c.handle_action("car_mode", value=m)
elif r < 0.1:
ch.station_a = rnd.choice(stations)
elif r < 0.103 and c.car_mode == "solar" and p.ch.readback_a > 0.5 \
and st.get("back") is None:
exit_check(p, c) # leave Solar while it charges
st["acts"].append(p.t)
st["back"] = p.t + rnd.randint(30, 120)
return c.handle_action("car_mode", value="off")
elif r < 0.2 and c.car_solar.seq is not None:
st["n"]["mid"] = st["n"].get("mid", 0) + 1
exit_check(p, c)
return c.handle_action("car_mode", value="off")
ctx = []
def note(p, c, t):
ctx.append((t, c.car_mode, c.car_writing(), c.car_solar.single,
c.car_solar.hold, p.ch.station_a))
r = S.drive(house=lambda t: st["house"], sun=lambda t: st["sun"],
first="car", opts={"ev_margin_w": 0, "ev_start_min": 1,
"ev_pause_min": 1}, socs=FULL, dur=1200,
events={t: ev for t in range(1, 1200)}, on_cycle=note,
race=seed % 2 == 1, sim=SimCharger(setpoint_a=rnd.choice(
[0, 10, 16])))
bad = []
by_t = {x[0]: x for x in ctx}
log = r["plant"].wlog # on the harness clock
last_sel, last_nz = None, None
for t, what, v, power, sp in log:
# A write logged at second t comes after that second's actions.
x = by_t.get(t) or by_t.get(t - 1)
mode = x[1] if x else "?"
if what == "current" and v > min(16.0, x[5] if x else 16.0) + 1e-9:
bad.append(("N1 over the clamp", t, v))
if what == "phases":
if sp != 0.0:
bad.append(("N2 select with the setpoint up", t))
if last_sel is not None and t - last_sel < 600:
bad.append(("N2 two selects in 600 s", t))
last_sel = t
if what == "current" and mode == "off" and v > 0:
bad.append(("N10 a non-zero write in Off", t, v))
if what == "current" and x is not None and not x[2] and v > 0 \
and mode == "solar":
bad.append(("N10 a non-zero Solar write while not writing", t, v))
if what == "current" and v > 0 and mode == "solar":
near_act = any(abs(t - a) <= 3 for a in st["acts"])
if last_nz is not None and t - last_nz < 30 and not near_act:
bad.append(("N5 two non-zero writes under 30 s", t, v))
last_nz = t
for te in st["exits"]:
if not any(x[1] == "current" and x[2] == 0.0 and te <= x[0] <= te + 3
for x in log):
bad.append(("N9 Solar to Off left the current up", te))
if r["c"].charger.clamp_faults:
bad.append(("N1 clamp fault", r["c"].charger.clamp_faults))
st["n"]["exits"] = len(st["exits"])
return bad, len(log), st["n"]
fz_bad, fz_n, fz_counts = [], 0, {}
for _seed in range(14):
_b, _n, _c = fuzz(_seed)
fz_bad += _b
fz_n += _n
for k, v in _c.items():
fz_counts[k] = fz_counts.get(k, 0) + v
check(f"T45: {fz_n} charger writes over 14 random Solar sites and 16800 steps "
f"(outages, unplugs, refusals, other writers, a silent meter, shadow and "
f"Stop, mode changes, half racing): none over the clamp, no select with "
f"the setpoint up or two in 600 s, every Solar to Off at 0 A (N9), no "
f"non-zero write in Off, in shadow "
f"or stopped, none under 30 s apart ({fz_bad[:3]})",
not fz_bad and fz_n > 100)
check(f"T45: each disturbance happened ({fz_counts})",
all(fz_counts.get(k, 0) > 2 for k in ("plug", "down", "other", "meter",
"shadow", "stop", "mode",
"exits")))
print()
if fails:
print(f"{len(fails)} FAILED")
for f in fails:
print(" -", f)
sys.exit(1)
print("all passed")
+562
View File
@@ -0,0 +1,562 @@
"""EV-10, EV-11, EV-12: three rig findings of EV-04's test (F-1, F-2, F-3).
`python3 -B test_ev10.py`
1. EV-10: the car alone takes the batteries to the peak reserve while the period
is still projected UNDER the aim: no alarm, one grey notice. A stuck car
figure with a house overload, and a house-only drain, still alarm. Mutant:
an uncorroborated car figure in the "period without the car" test.
2. EV-11: the grey row and the Car Why do not flicker while the car keeps the
period over the limit; a real end clears them after OVER_OFF_HOLD_S. The
alarm decision (`car_explains`) has no hold.
3. EV-12: the add-on's own write, and Off within 15 s of it, is never "another
writer"; a real outside change afterwards still shows the row.
Mutating a module this file grades? Read MUTATION.md first (purge __pycache__).
"""
import asyncio
import dataclasses
import logging
import os
import sys
from datetime import datetime, timedelta, timezone
HERE = os.path.dirname(os.path.abspath(__file__))
sys.path.insert(0, os.path.join(HERE, "tools"))
from app import ctl_car, homeview, chargers as CH # noqa: E402
from app.main import Controller # noqa: E402
from app import freshness # noqa: E402
from chargersim import FakeHa, SimCharger # noqa: E402
import ev04_peak as P # noqa: E402
import safety81_sim as s81 # noqa: E402
import opt11_identity as rig # noqa: E402
fails = []
def check(name, cond):
print(f" {'ok ' if cond else 'FAIL'} {name}")
if not cond:
fails.append(name)
class _Log(logging.Handler):
def __init__(self):
super().__init__(logging.DEBUG)
self.rec = []
def emit(self, r):
self.rec.append((r.levelname, r.getMessage()))
LOG = _Log()
_lg = logging.getLogger("goodwe")
_lg.addHandler(LOG)
_lg.setLevel(logging.DEBUG)
_lg.propagate = False
# =========================================================================== #
print("1. EV-10: THE CAR ALONE TAKES THE BATTERIES TO THE RESERVE (F-1)")
# =========================================================================== #
CAP = 4500.0 # the aim is 4450 W (50 W margin)
HOUSE = 1100.0
def at_reserve(plant, c):
"""The batteries reach the peak reserve late in the period, and the house
eases a little: the period is still projected UNDER the aim."""
plant.soc = 19.0
plant.load = lambda at: 780.0 + plant.ch.power_w
def alarms(r):
return P.ids(r, *P.ALARMS)
UNDER = [] # (second, projected W, aim W) while floor-limited
def watch(first, fn):
"""Events for seconds 840 to 894: `fn` at `first`, and a note of every
cycle in which the guard is floor-limited."""
def note(plant, c):
g = c.peak_guard
if g is not None and g.floor_limited:
UNDER.append((plant.t, g.projected_w, g.target_w))
ev = {t: note for t in range(first - 10, 895)}
ev[first] = lambda plant, c: (fn(plant, c), note(plant, c))
return ev
LOG.rec.clear()
r10 = P.drive(s81.constant(HOUSE), dur=895, rating=12000.0, soc=60.0,
cap=CAP, phases=1, events=watch(850, at_reserve))
ERR10 = [m for lv, m in LOG.rec if lv in ("ERROR", "WARNING")]
check("PRECONDITION: the guard was floor-limited with the projection UNDER "
"the aim (the rig's 5888 W against 6000 W)",
any(p < a for _t, p, a in UNDER))
check("the car alone: no 'Load too high', no 'Battery stopped limiting the "
"peak'", alarms(r10) == [])
rows10 = {x["id"]: x for x in r10["c"].checks()}
check("...no red row; the grey 'Car over the peak limit' row says it",
rows10["peak_guard"]["ok"] is True
and not [x for x in r10["c"].checks()
if x["ok"] is False and not x["warn"]]
and rows10.get("car_over", {}).get("ok") is True)
check("...one grey notice for the session", len(P.ids(r10, P.OVER)) == 1)
check("...no ERROR (or WARNING) line was logged for it", ERR10 == [])
def house_stuck(plant, c):
at_reserve(plant, c)
plant.ch.freeze() # the reading stops moving
plant.ch.unplug() # the car really goes
plant.load = lambda at: 9000.0 + plant.ch.power_w
asyncio.get_event_loop().create_task(c.handle_action("car_current",
value=10))
r10s = P.drive(s81.constant(HOUSE), dur=895, rating=12000.0, soc=60.0,
cap=CAP, phases=1, events=watch(850, house_stuck))
check("a stuck car figure and a house overload at the reserve: the normal "
"alarm still fires",
[n for _t, n in alarms(r10s)]
and all(n in P.ALARMS for _t, n in alarms(r10s)))
def house_drain(plant, c):
plant.soc = 19.0
plant.load = lambda at: 12000.0 + plant.ch.power_w
r10h = P.drive(s81.constant(HOUSE), dur=895, rating=12000.0, soc=60.0,
cap=CAP, phases=1, user_a=6, setpoint=6,
events=watch(600, house_drain))
check("a house-only drain to the reserve with the car charging little: the "
"normal alarm still fires",
alarms(r10h) != [] and not r10h["c"].car_explains)
def plug_late(plant, c):
plant.ch.plug_in()
def house_reserve(plant, c):
plant.soc = 19.0
plant.load = lambda at: 3075.0 + plant.ch.power_w
def swapped_events():
ev = watch(850, house_reserve)
ev[800] = plug_late
return ev
def swapped(mode):
return P.drive(s81.constant(6000.0), dur=895, rating=12000.0, soc=60.0,
cap=CAP, phases=1, user_a=6, setpoint=6, mode=mode,
plug=False, events=swapped_events())
r10x = swapped("manual")
r10xo = swapped("off")
check("PRECONDITION (review): a 6 kW HOUSE drains the batteries, the car "
"plugs in late (a small share); the projection is under the aim at the "
"reserve, and Off raises the alarm", alarms(r10xo) != []
and any(p < a for _t, p, a in UNDER))
check("the house drains the batteries and a small car is plugged in: the "
"normal alarm still fires in Manual", alarms(r10x) != [])
r10off = P.drive(s81.constant(HOUSE), dur=895, rating=12000.0, soc=60.0,
cap=CAP, phases=1, mode="off", events=watch(850, at_reserve))
check("PRECONDITION: Off, the same case raises the normal alarm (the false "
"alarm Manual must not make)", alarms(r10off) != [])
# a direct unit of the rule: the car's average, the period without it
class _Car(ctl_car.CarMixin):
def __init__(self, cover=True, w=3700.0):
self.o = {"ev_batt_cover": cover}
self.w = w
self._now = 0.0
self.site_batt_w, self.site_rating_w = 300.0, 5000.0
self.car_init({}, type("S", (), {"data": {}, "set": lambda s, k, v: 0})())
def car_now(self):
return self._now
def car_alarm_w(self):
return self.w
class car: # noqa: N801
@staticmethod
def status(*_a):
return "charging"
@dataclasses.dataclass
class _Proj:
projected_w: float
elapsed_s: float = 850.0
held_w: float = 0.0
block_start: object = datetime(2026, 11, 16, 20, 0, tzinfo=timezone.utc)
def __post_init__(self):
self.held_w = self.projected_w
class _G:
def __init__(self, floor=True, sat=False, within_aim=False):
self.floor_limited, self.saturated = floor, sat
self.floor_w, self.able_w, self.ceiling_w = 0.0, None, 4500.0
self.engaged, self.blind, self.wanted_w = True, None, 300.0
self.within_aim = within_aim
def explains(proj_w, car_w, *, floor=True, cover=True, car_so_far_w=None,
within_aim=False, earlier=(), block=0, c=None, at=0.0):
"""One cycle of `car_cycle` on a stub; `earlier` are projections of
cycles before it in the same quarter (they latch SAFETY-126's test)."""
c = c or _Car(cover, car_w)
c.w = car_w
for k, e in enumerate(tuple(earlier) + (proj_w,)):
p = _Proj(e)
p.block_start = p.block_start + timedelta(minutes=15 * block)
c._now = at - len(earlier) + k
c._carq = {"key": p.block_start,
"ws": ((car_w or 0.0) if car_so_far_w is None else car_so_far_w)
* p.elapsed_s, "mono": c._now}
c.car_cycle(p, _G(floor, within_aim=within_aim), 4450.0, None)
return c.car_explains
check("rule: the alarm's test is true with the car (4468 W, the batteries "
"at 0 W land 4485 W) and false without it (768 W): the car explains it, "
"with the projection under the aim", explains(4468.0, 3700.0))
check("rule: under the aim, the quarter's test latched by the car's share "
"(4600 W earlier), the car explains the alarm (the positive under-aim "
"case; a single 4300 W cycle has no landing miss to explain, so it "
"needs the earlier cycle)", explains(4300.0, 3700.0, earlier=(4600.0,)))
check("rule: where the alarm would not fire anyway nothing is explained",
not explains(4300.0, 3700.0, within_aim=True))
check("rule: without the car it is still over the aim: the car does not "
"explain it", not explains(9000.0, 3700.0))
check("rule: no car power, no explanation", not explains(4300.0, 0.0))
check("rule: ...also when the test was latched earlier in the quarter",
not explains(4300.0, 0.0, earlier=(4600.0,))
and not explains(9000.0, 0.0))
check("rule: an untrusted car figure (None) explains nothing",
not explains(4300.0, None, earlier=(4600.0,)))
# the latches: per quarter, and independent of the cover option
c4 = _Car(True, 3700.0)
explains(9000.0, 3700.0, c=c4, block=0) # the house needs it: latched
check("latch: in the same quarter the house need stays latched, so the car "
"does not explain", not explains(4300.0, 3700.0, c=c4, block=0, at=10.0))
check("latch: a new quarter starts clean: the car alone explains it again",
explains(4300.0, 3700.0, c=c4, block=1, at=1000.0,
earlier=(4600.0,)))
c5 = _Car(False, 3700.0) # cover OFF
explains(9000.0, 3700.0, c=c5, block=0) # the house needs it
c5.o["ev_batt_cover"] = True # ... and the option flips
check("latch: the option flipping to ON does not lose a house need seen "
"while it was off", not explains(4300.0, 3700.0, c=c5, block=0, at=10.0))
c6 = _Car(True, 3700.0)
explains(9000.0, 3700.0, c=c6, block=0)
c6.o["ev_batt_cover"] = False
explains(4300.0, 3700.0, c=c6, block=0, at=10.0)
c6.o["ev_batt_cover"] = True
check("latch: ... nor does flipping it off and on again",
not explains(4300.0, 3700.0, c=c6, block=0, at=20.0))
check("rule: the guard is not floor-limited or saturated: nothing to explain",
not explains(4300.0, 3700.0, floor=False))
# =========================================================================== #
print("\n2. EV-11: THE 'CAR OVER THE PEAK LIMIT' ROW DOES NOT FLICKER (F-2)")
# =========================================================================== #
# The cause (rig p7off 21:18 to 21:45, plant.csv): after 21:15 the car's own
# quarter (14.0 kW) was the month peak, so the aim was that quarter's average
# and the grid of the next ones (14.04 kW, +-40 W of noise) sat ON it. The
# projection crossed the aim every few seconds, `ex > 0` came and went, and
# `car_over` followed it with no hold on the way off.
def over_run(c, secs, proj_of, w_of=lambda t: 11000.0, t0=0.0, target=14000.0,
cover=False):
"""Run `car_cycle` once a second; returns (car_over, car_explains) per second."""
out = []
for k in range(secs):
t = t0 + k
c._now = t
c.w = w_of(t)
p = _Proj(proj_of(t), elapsed_s=300.0 + (t % 400))
c._carq = {"key": p.block_start, "ws": 11000.0 * p.elapsed_s,
"mono": t}
c.car_cycle(p, _G(True), target, None)
out.append((c.car_over, c.car_explains))
return out
def noisy(t):
"""The projection straddles the aim: +-40 W, a new value every 7 s."""
return 14000.0 + (40.0 if int(t // 7) % 2 else -40.0) * (1 + (int(t) % 3))
c11 = _Car(cover=False)
o11 = over_run(c11, 1200, noisy)
flips = sum(1 for a, b in zip(o11, o11[1:]) if a[0] != b[0])
check("while the car keeps the period at the limit the row stays on: one "
"switch on in 20 minutes, none off", flips == 1 and len(o11) == 1200 and o11[-1][0] is True)
check("it turns on after the existing 10 s hold, not later than the first "
"10 s the condition has stood (a gap does not restart the count)",
next((i for i, x in enumerate(o11) if x[0]), 10**6) <= 25)
# the condition on its own, for the PRECONDITION: the same input flips
c11o = _Car(cover=False)
raw = []
for k in range(1200):
c11o._now = float(k)
p = _Proj(noisy(k), elapsed_s=300.0 + (k % 400))
c11o._carq = {"key": p.block_start, "ws": 11000.0 * p.elapsed_s, "mono": k}
ex = p.projected_w - 14000.0
raw.append(ex > 0.0 and c11o.car_avg_w(p, 11000.0) >= ex)
raw_flips = sum(1 for a, b in zip(raw, raw[1:]) if a != b)
check("PRECONDITION: the condition itself flips many times in those 20 "
"minutes", raw_flips > 20)
# a real end: the car stops (no trusted power) after 600 s
c11e = _Car(cover=False)
o11e = over_run(c11e, 1000, lambda t: 14500.0,
w_of=lambda t: 11000.0 if t < 600 else None)
off_at = next((i for i, x in enumerate(o11e) if i > 600 and not x[0]), -1)
check("a real end: the row stays for OVER_OFF_HOLD_S (180 s) and then goes",
off_at == 600 + int(ctl_car.OVER_OFF_HOLD_S)
and not any(x[0] for x in o11e[off_at:]))
o11r = over_run(c11e, 100, lambda t: 14500.0, t0=1000.0)
check("it comes back after the usual 10 s if the condition returns after "
"it went", len(o11r) == 100 and o11r[9][0] is False and o11r[10][0] is True)
# the alarm decision has no hold: a real house overload is never delayed
c11a = _Car(cover=True)
o11a = over_run(c11a, 60, lambda t: 4300.0, target=4450.0)
check("decision 1 on: the car explains it at once (no hold)",
len(o11a) == 60 and o11a[0][1] is True)
c11a.w = None # the figure is not trusted
c11a._now = 61.0
c11a.car_cycle(_Proj(4300.0), _G(True), 4450.0, None)
check("...and the moment the car figure is not trusted it explains nothing, "
"so the normal alarms stand at once (the grey row may stay)",
c11a.car_explains is False)
# the whole thing on the real controller: the Why does not flicker either
def p7_like(plant, c):
plant.load = lambda at: 3000.0 + plant.ch.power_w
r11 = P.drive(s81.constant(HOUSE), dur=700, rating=2000.0, soc=60.0, cap=CAP,
phases=3, opts={"ev_batt_cover": False})
ov = [s[2] for s in r11["snaps"]]
check("real controller, cover off, an 11 kW car: the flag is steady once on",
sum(1 for a, b in zip(ov, ov[1:]) if a != b) <= 1 and ov[-1] is True)
# =========================================================================== #
print("\n3. EV-12: OUR OWN WRITE IS NOT ANOTHER WRITER (F-3)")
# =========================================================================== #
CLOCK = [1000.0]
freshness.monotonic = lambda: CLOCK[0]
SET = "number.wallbox_power_connector_max_current_socket_1"
BASE = {"setpoint_entity": "number.sp", "meter_entity": "sensor.grid",
"soc_entity": "sensor.soc", "batt_entity": "sensor.batt",
"meter_source": "off", "max_w": 5000, "gain": 0.6, "slew_w": 500,
"deadband_w": 15, "target_grid_w": 0, "step_w": 10, "heartbeat_s": 10,
"stale_input_s": 15, "shadow_mode": "off", "peak_cap_w": 3500,
"pv_entities": ["sensor.pv"], "ev_charger": "alfen_ha", "ev_max_a": 16,
"ev_phases": "auto", "ev_current_entity": SET}
class _Store:
def __init__(self):
self.data = {}
def set(self, k, v):
self.data[k] = v
def get(self, k, d=None):
return self.data.get(k, d)
def set_time(self, k, v):
self.data[k] = v.isoformat()
def get_time(self, k):
v = self.data.get(k)
return None if v is None else datetime.fromisoformat(v)
class _Pub:
enabled = False
def publish(self, v):
pass
def close(self):
pass
class Site(FakeHa):
def __init__(self, charger):
super().__init__(charger, None)
async def limits(self, _e):
return (-5000.0, 5000.0, 1.0)
def _all(self):
out = super()._all()
for eid, val, unit in (("sensor.grid", 800.0, "W"),
("sensor.soc", 50.0, "%"),
("sensor.batt", 0.0, "W"),
("sensor.pv", 2000.0, "W")):
out[eid] = {"entity_id": eid, "state": str(val),
"attributes": {"unit_of_measurement": unit}}
return out
async def number(self, entity_id, invert=False):
s = self._all().get(entity_id)
try:
v = float(s["state"])
except (TypeError, ValueError, KeyError):
return None
return -v if invert else v
async def set_number(self, entity_id, value):
return await super().set_number(entity_id, float(value))
class World:
"""A real Controller on the charger model. While a write waits for its
read-back, the controller's own reading goes on (as in production, where
the cycle runs while the writer task waits): that is how the read-back of
our own write reaches the tracker BEFORE the write returns."""
def __init__(self, setpoint=10):
self.sim = SimCharger(setpoint_a=setpoint)
self.sim.plug_in()
self.sim.lag_s = 2.0 # the rig's read-back lag
self.sim.phases_allowed = 1
self.t = 1000.0
CLOCK[0] = self.t
self.c = Controller(dict(BASE), Site(self.sim), _Store(), _Pub(),
stop=asyncio.Event())
self.c.auto = True
self.c.dev_min, self.c.dev_max = -5000.0, 5000.0
self.drv = self.c.charger
self.drv._sleep = self.sleep
self.drv._clock = lambda: CLOCK[0]
async def sleep(self, s):
self.sim.tick(s)
self.t += s
CLOCK[0] = self.t
await self.c.read_inputs(now_mono=self.t) # the cycle reads on
async def step(self, n=1):
for _ in range(n):
self.sim.tick(1.0)
self.t += 1.0
CLOCK[0] = self.t
await self.c.read_inputs(now_mono=self.t)
await self.c.cycle()
await self.c.car_settle()
def rows(self):
return {r["id"]: r for r in self.c.checks()}
async def own_then_off(wait):
w = World()
await w.step(3)
await w.c.handle_action("car_mode", value="manual")
await w.c.handle_action("car_current", value=12)
await w.step(wait)
await w.c.handle_action("car_mode", value="off")
await w.step(40)
return w
w12 = asyncio.run(own_then_off(2))
check("PRECONDITION: the add-on wrote 12 A and the charger took it",
w12.sim.readback_a == 12 and len(w12.sim.writes("current")) == 1)
check("our own write, then Off 2 s later: no 'Something else changes the "
"charger'", "charger_writer" not in w12.rows()
and w12.c.car.writer_at_utc is None)
w12b = asyncio.run(own_then_off(14))
check("...and 14 s later (inside the 15 s)", "charger_writer" not in
w12b.rows() and w12b.c.car.writer_at_utc is None)
async def own_then_outside():
w = await own_then_off(2)
w.sim.set_current(7) # somebody else, afterwards
await w.step(3)
early = "charger_writer" in w.rows()
await w.step(30)
return early, "charger_writer" in w.rows()
early12, late12 = asyncio.run(own_then_outside())
check("an outside change after that still shows the row (within 30 s)",
late12 is True)
async def manual_own():
w = World()
await w.step(3)
await w.c.handle_action("car_mode", value="manual")
await w.c.handle_action("car_current", value=12)
await w.step(60)
await w.c.handle_action("car_current", value=8)
await w.step(20)
return w
wm = asyncio.run(manual_own())
check("Manual: two writes of ours, never 'another writer' in the tracker",
wm.c.car.writer_at_utc is None and "charger_other" not in wm.rows())
async def failed_write_then_outside(how):
"""A write that RAISES or returns FAILURE must still close the self-mute:
it ends 15 s after the write returned, and a later outside change shows
the row."""
w = World()
await w.step(3)
await w.c.handle_action("car_mode", value="manual")
ret = []
async def bad(a):
await w.sleep(1.0)
ret.append(w.t) # when the write came back
if how == "raise":
raise RuntimeError("the charger link broke")
return False
w.drv.write_current = bad
await w.c.handle_action("car_current", value=12)
await w.step(3) # the write is tried
closed = (bool(ret) and w.c.car.mute_until <= ret[-1] + 15.0 + 1e-6)
await w.c.handle_action("car_mode", value="off")
await w.step(20) # past the 15 s mute
w.sim.set_current(7) # somebody else
await w.step(3)
return w, closed
for how in ("raise", "fail"):
wf, closed = asyncio.run(failed_write_then_outside(how))
check(f"a write that {'raises' if how == 'raise' else 'returns failure'}"
": the mute ends within 15 s of the write's return, and a later "
"outside change shows the row",
closed and "charger_writer" in wf.rows())
print()
print("FAIL: " + ", ".join(fails) if fails else "PASS: every check passed")
sys.exit(1 if fails else 0)
+176
View File
@@ -0,0 +1,176 @@
"""EV-10b: the period without the car is not clipped at 0 W (rig F-1 again).
`python3 -B test_ev10b.py`
The rig shape: house 3 kW, car 11 kW, batteries 8.1 kW, aim 6 kW. The batteries
give more than the house uses, so the house alone is an export; clipping it at
0 W charged the car's battery share to the house, latched "the house needs the
batteries" for the quarter, and the floor alarm fired once both batteries
reached the reserve. Mutating a module this file grades? Read MUTATION.md first.
"""
import asyncio
import dataclasses
import os
import sys
from datetime import datetime, timedelta, timezone
HERE = os.path.dirname(os.path.abspath(__file__))
sys.path.insert(0, os.path.join(HERE, "tools"))
from app import ctl_car, peakguard, tariff # noqa: E402
import ev04_peak as P # noqa: E402
import safety81_sim as s81 # noqa: E402
fails = []
def check(name, cond):
print(f" {'ok ' if cond else 'FAIL'} {name}")
if not cond:
fails.append(name)
CAP = 6050.0 # aim 6000 W
OPTS = {"inverters": [
{"name": f"inverter-{u}", "setpoint_entity": f"number.sp_{u}",
"soc_entity": f"sensor.soc_{u}", "batt_entity": f"sensor.batt_{u}",
"max_w": 4050, "bms_soc_floor": 10} for u in "ab"]}
def rig_run(house_w, soc_events, dur=895):
"""A whole quarter from its start, N=2 (4.05 kW each = 8.1 kW), the car at
11 kW; `soc_events` is {second: {"a": soc, "b": soc}}."""
def setter(socs):
return lambda plant, c: plant.socs.update(socs)
return P.drive(s81.constant(house_w), dur=dur, rating=4050.0,
soc={"a": 60.0, "b": 60.0}, cap=CAP, phases=3, n=2,
plant_cls=P.CarPlantN, opts=OPTS, dev_w=4050.0,
events={t: setter(s) for t, s in soc_events.items()})
def summary(r):
rows = r["c"].checks()
red = [x["id"] for x in rows if x["ok"] is False and not x["warn"]]
return (P.ids(r, *P.ALARMS), red, P.ids(r, P.OVER),
max(abs(r["plant"].batt(t)) for t in range(0, 30)) if r else 0)
print("1. THE RIG SHAPE, A WHOLE QUARTER (house 3 kW, car 11 kW, batteries 8.1 kW)")
r = rig_run(3000.0, {30: {"a": 19.0, "b": 19.0}})
al, red, over, _ = summary(r)
peak_batt = max(r["plant"].batt(t) for t in range(5, 30))
check("PRECONDITION: the batteries gave more than the house uses (8.1 kW "
"against 3 kW) before the reserve", peak_batt > 7500.0)
check("both batteries reach the reserve early in the quarter: no 'Battery "
"stopped limiting the peak', no 'Load too high'", al == [])
check("...no red row, and no goodwe_peak_soc_floor", red == [])
check("...one car-over notice", len(over) == 1)
check("...the car-over row is on at the end", any(
x["id"] == "car_over" and x["ok"] is True for x in r["c"].checks()))
r2 = rig_run(3000.0, {30: {"a": 19.0}, 200: {"b": 19.0}})
al2, red2, over2, _ = summary(r2)
check("N=2, one battery reaches the reserve first, the other later: no "
"alarm, no red row, one car-over notice",
al2 == [] and red2 == [] and len(over2) == 1)
print("\n2. BATTERIES ABOVE THE HOUSE AND THE HOUSE ALONE OVER THE AIM")
r3 = rig_run(7000.0, {30: {"a": 19.0, "b": 19.0}})
check("house 7 kW, car 11 kW, aim 6 kW, batteries to the reserve: the alarm "
"fires (the house alone misses the aim)", summary(r3)[0] != []
and not r3["c"].car_explains)
print("\n3. THE COUNTERFACTUAL ITSELF")
BS = datetime(2026, 11, 16, 20, 0, tzinfo=timezone.utc)
class _Car(ctl_car.CarMixin):
def __init__(self, cover=True):
self.o = {"ev_batt_cover": cover}
self._carq = {"key": BS, "ws": 0.0, "mono": 0.0}
def proj(grid, elapsed, held=None):
return tariff.Projection(
projected_w=grid, elapsed_w=grid, elapsed_s=elapsed,
covered_frac=1.0, complete=False, block_start=BS,
held_w=grid if held is None else held)
def lands(p, batt, aim=5950.0):
return peakguard.misses_aim(p, batt_w=batt, target_w=aim)
c = _Car()
for el in (10.0, 30.0, 120.0, 300.0, 600.0):
c._carq["ws"] = 11040.0 * el
p = proj(3000 + 11040 - 8100, el)
x = c.car_exclude_alarm(p, 11040.0)
check(f"rig numbers at {el:.0f} s: the house alone does not miss the aim "
"(no 0 W clip)", not lands(x, 8100.0))
check(f"...and the guard-side `car_exclude` is unchanged (still clipped)",
c.car_exclude(p, 11040.0).held_w == 0.0)
c._carq["ws"] = 11040.0 * 30
x = c.car_exclude_alarm(proj(5940.0, 30.0), 11040.0)
check("the rest of the period keeps its sign: held = grid - car = -5100 W",
abs(x.held_w - (5940.0 - 11040.0)) < 1e-6)
check("a fresh car reading is needed: None gives the period back as it is",
c.car_exclude_alarm(proj(5940.0, 30.0), None).held_w == 5940.0)
# the house alone over the aim still misses
c._carq["ws"] = 11040.0 * 30
check("house 7 kW alone (batteries 8.1 kW, car 11 kW): the house misses the aim",
lands(c.car_exclude_alarm(proj(7000 + 11040 - 8100, 30.0), 11040.0),
8100.0))
# review: the done part is clipped at 0 Ws. Rig shape for 400 s (grid 5940 W),
# then the batteries at the reserve and the house at 12 kW: the house alone
# lands 6667 W. Crediting the car-made export (-5100 W x 400 s) would hide it.
c._carq["ws"] = 11040.0 * 400
held = 12000.0 + 11040.0
check("the car's battery share earlier is not credited against a later house "
"overload (done part clipped at 0 Ws)",
lands(c.car_exclude_alarm(
proj((5940.0 * 400 + held * 500) / 900, 400.0, held), 11040.0), 0.0))
# review: the rest of the period takes off the car's power NOW, not its
# quarter average. Car 11 kW for 500 s, then 1.4 kW; house 7 kW, no batteries.
c._carq["ws"] = 11040.0 * 500 + 1380.0 * 100
held = 7000.0 + 1380.0
check("a car turned down mid-quarter: the rest takes off its power now, so "
"the house alone (7 kW) still misses the aim",
lands(c.car_exclude_alarm(
proj(((7000 + 11040) * 500 + held * 100 + held * 300) / 900, 600.0,
held), 1380.0), 0.0))
# with the batteries giving less than the house the two agree where the old
# clip did not bite
p = proj(3000 + 3700 - 300, 300.0)
c._carq["ws"] = 3700.0 * 300.0
old, new = c.car_exclude(p, 3700.0), c.car_exclude_alarm(p, 3700.0)
check("batteries under the house: the same landing as before (no clip bit)",
abs(old.projected_w - new.projected_w) < 1e-6
and abs(old.held_w - new.held_w) < 1e-6)
# cover OFF: the projection the guard sees is `car_exclude`, bit for bit what
# b86c015 built (a frozen copy of its formula), over a grid of periods
def frozen(c, p, w):
avg = c.car_avg_w(p, w)
return (max(0.0, float(p.projected_w) - avg),
max(0.0, float(p.held_w) - float(w)))
same = True
for grid in (-3000.0, 0.0, 800.0, 5900.0, 14000.0):
for held in (-4000.0, 0.0, 6000.0, 15000.0):
for el in (0.0, 30.0, 450.0, 899.0):
for w in (1380.0, 3700.0, 11040.0):
c._carq["ws"] = w * el * 0.9
p = proj(grid, el, held)
x = c.car_exclude(p, w)
same = same and (x.projected_w, x.held_w) == frozen(c, p, w)
check("cover off: the projection the guard sees (`car_exclude`) is bit for "
"bit the old formula over 240 periods", same)
check("...and `car_exclude` still hands back the period when the car figure "
"is None", c.car_exclude(proj(5000.0, 30.0), None).projected_w == 5000.0)
print()
print("FAIL: " + ", ".join(fails) if fails else "PASS: every check passed")
sys.exit(1 if fails else 0)
+344
View File
@@ -0,0 +1,344 @@
"""EV-15: the add-on's own phase change at the peak reserve raises no alarm.
`python3 -B test_ev15.py`
The rig (EV-10 and EV-10b, F-2): cover on, the batteries at the reserve, the car
charging and explaining the excess. The add-on's own 3 -> 1 phase switch sets
the car to 0 A; with the car not charging its figure is no longer corroborated
(`CarTracker.corroborated`), so `car_alarm_w()` is None, nothing is explained,
and PEAK_GUARD_FLOOR_LIMITED plus `goodwe_peak_soc_floor` fire. The rule: for
the add-on's own sequence only (`ctl_car._car_own_pause`, bounded) the car's
fresh, not stuck figure stands in for grading.
1. The rig shapes end to end through the car cycle: 3 -> 1 and 1 -> 3.
2. A house overload that starts during the sequence still alarms, as on Off.
3. Aborted (Off, Stop, unplug), refused, an outside writer: no grace.
4. The bounds, and the figure that stands in (stale, stuck: nothing).
Mutating a module this file grades? Read MUTATION.md first (purge __pycache__).
"""
import asyncio
import logging
import os
import sys
HERE = os.path.dirname(os.path.abspath(__file__))
sys.path.insert(0, os.path.join(HERE, "tools"))
from app import ctl_car, carmode, chargers as CH # noqa: E402
import ev04_peak as P # noqa: E402
import safety81_sim as s81 # noqa: E402
logging.disable(logging.CRITICAL)
fails = []
def check(name, cond):
print(f" {'ok ' if cond else 'FAIL'} {name}")
if not cond:
fails.append(name)
def at(t, fn):
return {"t": t, "fn": fn}
def beside(plant, c):
"""The writer runs BESIDE the cycle, as in production (`car_kick`): its 1 s
poll for the read-back lands after the cycle's own read, and the cycle does
not wait for the writer (`ev04_peak.drive` does)."""
gate = asyncio.Event()
async def sleep(_s):
gate.clear()
await gate.wait()
async def settle():
gate.set()
for _ in range(5):
await asyncio.sleep(0)
c.charger._sleep = sleep
c.car_settle = settle
def run(house, cap, t_res, t_sw, new, *, extra=None, mode="manual",
sim_fn=None, dur=895, plug=True, side=False):
"""Reserve at `t_res`, our phase change to `new` at `t_sw`. Returns the
run, a per-second trace (second, own-pause, explains, red rows) and the
alarms."""
tr = []
def note(plant, c):
red = [x["id"] for x in c.checks()
if x["ok"] is False and not x["warn"]] \
if t_sw - 5 <= plant.t <= t_sw + 90 else []
g = c.peak_guard
lim = bool(g is not None and (g.floor_limited or g.saturated))
tr.append((plant.t, getattr(c, "_car_own_pause", lambda _t: False)(c.car_now()), c.car_explains,
red, plant.ch.power_w, plant.ch.state, lim))
def reserve(plant, c):
plant.soc = 19.0
plant.load = lambda t: house + plant.ch.power_w
def switch(plant, c):
asyncio.get_event_loop().create_task(
c.handle_action("car_phases", value=new))
ev = {t: note for t in range(0, dur)}
ev[t_res] = lambda p, c: (reserve(p, c), note(p, c))
ev[t_sw] = lambda p, c: (switch(p, c), note(p, c))
if side:
ev[t_sw - 2] = lambda p, c: (beside(p, c), note(p, c))
for t, fn in (extra or {}).items():
prev = ev.get(t, note)
ev[t] = (lambda p, c, prev=prev, fn=fn: (fn(p, c), prev(p, c)))
sim = None
if sim_fn is not None or side:
from chargersim import SimCharger
sim = SimCharger(setpoint_a=16)
sim_fn = sim_fn or (lambda s: None)
sim_fn(sim)
r = P.drive(s81.constant(house), dur=dur, rating=12000.0, soc=60.0,
cap=cap, phases=(3 if new == 1 else 1), user_a=16, setpoint=16,
mode=mode, events=ev, sim=sim, plug=plug)
return r, tr, P.ids(r, *P.ALARMS)
def reds(tr):
return [x for x in tr if x[3]]
# =========================================================================== #
print("1. THE RIG SHAPES THROUGH THE CAR CYCLE")
# =========================================================================== #
SHAPES = (
("EV-10 shape: house 3 kW, car 11 kW, aim 6 kW, 3 -> 1",
3000.0, 6050.0, 300, 600, 1),
("EV-10b shape: a 9411 W limit, 3 -> 1", 2000.0, 9461.0, 300, 600, 1),
("1 -> 3 (the car 3.7 kW, then 11 kW), aim 5 kW", 2500.0, 5050.0,
100, 600, 3),
)
for name, house, cap, t_res, t_sw, new in SHAPES:
r, tr, al = run(house, cap, t_res, t_sw, new)
c, sim = r["c"], r["sim"]
sw = [x for x in sim.writes() if x[1] == "phases"]
check(f"{name}: the car at the reserve covers, and the add-on's own "
f"sequence ran (0 A, select, the current back)",
len(sw) == 1 and [x[2] for x in sim.writes("current")][-2:]
== [0.0, 16.0] and sim.phases_allowed == new)
pause = [x for x in tr if x[1]]
check(f"{name}: the own-pause grace was on during it, and ended",
len(pause) >= 10 and not any(x[1] for x in tr[-1:])
and (pause[-1][0] - pause[0][0])
<= getattr(ctl_car, "OWN_PAUSE_MAX_S", 0)
+ getattr(ctl_car, "OWN_PAUSE_TAIL_S", 0))
check(f"{name}: no PEAK_GUARD_FLOOR_LIMITED / saturated, no "
f"goodwe_peak_soc_floor notification", al == [])
check(f"{name}: no red row in any sample around the switch",
reds(tr) == [])
limited = [x for x in tr if x[1] and x[6]]
check(f"{name}: in every cycle of the sequence in which the guard is "
f"limited (the cycle of the rig's alarm among them) the car "
f"explains it", len(limited) >= 1 and all(x[2] for x in limited)
and any(x[2] for x in tr if x[0] == t_sw + 1))
check(f"{name}: and in every limited cycle after it, to the quarter's end",
all(x[2] for x in tr if x[0] >= t_sw and x[6]))
# =========================================================================== #
print("\n2. A HOUSE OVERLOAD DURING THE SEQUENCE STILL ALARMS")
# =========================================================================== #
def overload(plant, c):
plant.load = lambda t: 25000.0 + plant.ch.power_w
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, extra={606: overload})
ro, tro, alo = run(3000.0, 6050.0, 300, 600, 1, extra={606: overload},
mode="off", plug=False)
rn, trn, aln = run(3000.0, 6050.0, 300, 900, 1, extra={606: overload})
check("PRECONDITION: on Off (no car) the same load alarms, and in Manual "
"with no phase change", alo != [] and aln != [])
check("a 25 kW house overload that starts 6 s into the sequence (the car "
"paused): the alarm fires", al != [])
print(f" alarm seconds: in the sequence {[t for t, _ in al]}, Off without "
f"the car {[t for t, _ in alo]}, Manual with no phase change "
f"{[t for t, _ in aln]}")
check("...at the same second as on Off and as in Manual with no phase change",
bool(al) and bool(alo) and bool(aln)
and al[0][0] == alo[0][0] == aln[0][0])
check("...and the car does not explain it (during the sequence too)",
not any(x[2] for x in tr if 640 <= x[0] <= 660))
# =========================================================================== #
print("\n3. ABORTED, REFUSED, OUTSIDE: NO GRACE AFTER IT")
# =========================================================================== #
def hit(res, t0, secs):
return [x for x in res if t0 <= x[0] <= t0 + secs and x[1]]
def off_now(plant, c):
asyncio.get_event_loop().create_task(c.handle_action("car_mode",
value="off"))
def stop_now(plant, c):
c.auto = False
def unplug(plant, c):
plant.ch.unplug()
slow = lambda s: setattr(s, "stop_delay_s", 8.0) # noqa: E731
for what, fn in (("Off", off_now), ("Stop", stop_now), ("unplug", unplug)):
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, extra={602: fn},
sim_fn=slow)
check(f"{what} 2 s into the sequence: the grace is off from the next "
f"cycle on", not hit(tr, 604, 200)
and any(x[1] for x in tr if 600 <= x[0] <= 602))
def refuse_phases(sim):
sim.request_phases = lambda n: False
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, sim_fn=refuse_phases)
check("the select is refused: the grace ends at once (no cycle of it after "
"the refusal), the current comes back",
len([x for x in r["sim"].writes("current")]) >= 2
and not hit(tr, 606, 200))
def outside_zero(plant, c):
plant.ch.set_current(0.0)
r2, tr2, al2 = run(3000.0, 6050.0, 300, 900, 1, extra={602: outside_zero})
check("an outside writer's 0 A: no grace, and the normal grading (no car "
"power: nothing explained) raises the alarm as before",
not any(x[1] for x in tr2) and not any(x[2] for x in tr2
if 610 <= x[0] <= 700)
and al2 != [])
# =========================================================================== #
print("\n4. THE BOUNDS AND THE FIGURE THAT STANDS IN")
# =========================================================================== #
class _C(ctl_car.CarMixin):
"""The mixin with just what `_car_own_pause` reads."""
def __init__(self):
self.o = {}
self.car_init({}, type("S", (), {"data": {}, "set": lambda s, k, v: 0})())
self.car_mode = carmode.MANUAL
self.auto, self.shadow = True, False
self.inverters, self.site_sign_wd = [], type("W", (), {"tripped": False})()
self.circ_wd = type("W", (), {"tripped": False})()
self.charger = type("H", (), {"configured": lambda s: True})()
self.car = CH.CarTracker()
self.car.reading = CH.ChargerReading(available=True, state="B")
c = _C()
c.car_writer.seq = {"stage": "settle", "t0": 100.0, "n": 1, "tries": 0,
"prev": 16.0}
M = ctl_car.OWN_PAUSE_MAX_S
check("bound: the sequence's own maximum is its waits (0 A wait, settle, "
"three tries at 15 s, the select) and no more",
M == carmode.ZERO_WAIT_S + carmode.SETTLE_S + carmode.MAX_TRIES * 15.0
+ 10.0 and ctl_car.OWN_PAUSE_TAIL_S == CH.CORR_WINDOW_S)
check("bound: on at the 0 A write and up to the maximum",
c._car_own_pause(100.0) and c._car_own_pause(100.0 + M))
check("bound: off one second past it", not c._car_own_pause(101.0 + M))
c.car_writer.seq = None
c.car_writer.phase_done_at = 200.0
T = ctl_car.OWN_PAUSE_TAIL_S
check("bound: after the current is set again it lasts one corroboration "
"window", c._car_own_pause(200.0 + T) and not c._car_own_pause(201.0 + T))
c.car_writer.phase_done_at = None
check("no sequence and none just done: no grace", not c._car_own_pause(100.0))
c.car_writer.seq = {"stage": "settle", "t0": 100.0, "failed": True}
check("a refused write marks the sequence: no grace", not c._car_own_pause(110.0))
c.car_writer.seq = {"stage": "settle", "t0": 100.0}
c.car_mode = carmode.OFF
check("Off: no grace", not c._car_own_pause(110.0))
c.car_mode, c.shadow = carmode.MANUAL, True
check("shadow mode: no grace", not c._car_own_pause(110.0))
c.shadow, c.auto = False, False
check("control stopped: no grace", not c._car_own_pause(110.0))
c.auto = True
c.car_writer.hold = True
check("another writer (hold): no grace", not c._car_own_pause(110.0))
c.car_writer.hold = False
c.car_writer.seq, c.car_writer.zero_sent_at = None, 100.0
check("0 A sent, not yet back: grace from the send, to the maximum, no more",
c._car_own_pause(100.0) and c._car_own_pause(100.0 + M)
and not c._car_own_pause(101.0 + M))
c.car_writer.zero_sent_at = None
c.car_writer.phase_done_at = 200.0
c.car_writer.hold = True
check("another writer in the 60 s after the current is set: no grace",
not c._car_own_pause(210.0))
c.car_writer.hold, c.car_writer.phase_done_at = False, None
c.car_writer.seq = {"stage": "settle", "t0": 100.0}
c.car.reading = CH.ChargerReading(available=True, state="A")
check("unplugged: no grace", not c._car_own_pause(110.0))
c.car.reading = CH.ChargerReading(available=True, state="B")
check("PRECONDITION: the same state is on", c._car_own_pause(110.0))
tk = CH.CarTracker()
tk.reading = CH.ChargerReading(available=True, state="B", power_w=500.0,
allowed_a=16.0, phases_allowed=1)
tk.last_ok = 0.0
check("the stand-in figure is the fresh reading, capped by the read-back",
tk.car_w_paused(5.0) == 500.0 and tk.car_w_trusted(5.0) is None)
check("a stale reading stands in for nothing", tk.car_w_paused(100.0) is None)
tk.stuck_now = True
check("a stuck reading stands in for nothing", tk.car_w_paused(5.0) is None)
# =========================================================================== #
print("\n5. THE WRITER RUNS BESIDE THE CYCLE (review F-1)")
# =========================================================================== #
# The car stops (state B) in the same Home Assistant update as the 0 A
# read-back; the write has not returned yet, so no sequence exists. The window
# opens when the write is SENT (`ManualWriter.zero_sent_at`).
def lagged(lag, delay):
def f(s):
s.lag_s, s.stop_delay_s = lag, delay
return f
for lag, delay in ((2, 0), (0, 0), (2, 3), (5, 2)):
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, side=True,
sim_fn=lagged(lag, delay))
nm = f"beside the cycle, lag {lag} s, stop delay {delay} s"
limited = [x for x in tr if x[0] >= 600 and x[6]]
check(f"{nm}: our sequence ran (select once, then 16 A again)",
len([x for x in r["sim"].writes("phases")]) == 1
and r["sim"].phases_allowed == 1
and [x[2] for x in r["sim"].writes("current")][-2:] == [0.0, 16.0])
check(f"{nm}: no PEAK_GUARD_FLOOR_LIMITED, no goodwe_peak_soc_floor",
al == [])
check(f"{nm}: no red row, and the car explains every limited cycle",
reds(tr) == [] and all(x[2] for x in limited))
def not_taken(plant, c):
plant.ch.refuse = "ignore" # HA accepts, the charger does nothing
r, tr, al = run(3000.0, 6050.0, 300, 600, 1, side=True,
sim_fn=lagged(0, 0), extra={600: not_taken})
check("the 0 A write is not taken (read-back never follows): the window was "
"open while it waited", any(x[1] for x in tr if 600 <= x[0] <= 606))
own = [x[0] for x in tr if x[1]]
runs = 1 + len([1 for a, b in zip(own, own[1:]) if b - a > 1])
check("...and no grace after the refusal (the retry, RETRY_S later, opens it "
"again only while that write waits: at most 3 runs of 11 s), no "
"sequence made", not hit(tr, 613, 40) and r["c"].car_writer.seq is None
and 1 <= runs <= 3 and len(own) <= 3 * 11)
check("...the car went on charging and nothing was written but the 0 A",
r["sim"].power_w > 5000.0 and not r["sim"].writes("phases"))
print()
if fails:
print(f"FAIL: {len(fails)} check(s)")
for f in fails:
print(" -", f)
sys.exit(1)
print("ok: EV-15")
+114 -4
View File
@@ -2,6 +2,14 @@
"""EV-03: a model of an Alfen car charger behind Home Assistant, for the unit
tests and, later, for TEST-23.
EV-04 ADDS THE WRITE SIDE: `request_current()` and `request_phases()` are what
the add-on's writes reach. The new state is taken after `lag_s` seconds of
model time (the read-back lag), the power RAMPS to it, and `refuse` makes the
charger ignore a write ("ignore": Home Assistant says yes, the charger does not
change) or Home Assistant refuse it ("error"). `log` records every write with
the model's clock and the power and setpoint at that moment, so a test can
prove the safe phase sequence (0 A first, under 100 W before the phases move).
WHERE IT LIVES, AND WHY. The rig's hardware sims (`hwsim.py`, `plantsim.py`) are
in the infra repo admin/goodwe under `sim/`, pinned by `.gitea/infra-pin`; there
is no `sim/` in this repository. This card may write only to this repository, so
@@ -51,6 +59,18 @@ class SimCharger:
self.unavailable = False
self.login_on = True
self.error = "0: No Error"
# EV-04: the write side
self.t = 0.0 # model seconds
self.lag_s = 0.0 # a write shows in the read-back this late
self.refuse = None # None | "ignore" | "error"
self._snap = None # `freeze()`: the readings stop moving
self._frozen_w = None # `freeze_power()`: only the power does
self.no_energy = False # a charger with no energy entity
self.ramp_w_s = RAMP_W_S # how fast the power follows its target
self.stop_delay_s = 0.0 # mode3 stays C this long after 0 A
self._c_hold = 0.0
self.log = [] # (t, what, value, power_w, setpoint_a)
self._pending = []
# -- the world acts on it -------------------------------------------------
def plug_in(self, car_phases=3):
@@ -76,6 +96,44 @@ class SimCharger:
"""mode3 E or F: the charger's own error states."""
self.state, self.power_w = letter, 0.0
# -- what the add-on's writes reach (EV-04) ----------------------------------
def request_current(self, a):
"""`number.set_value` on the current. False: Home Assistant refused it
(out of the entity's 0-40 A range, or `refuse == "error"`)."""
a = float(a)
if a != a or a < 0.0 or a > 40.0 or self.refuse == "error":
return False
self.log.append((self.t, "current", a, self.power_w, self.setpoint_a))
if self.refuse == "ignore":
return True
self._later("current", a)
return True
def request_phases(self, n):
"""`select.select_option` on the installation's allowed phases."""
if self.refuse == "error" or n not in (1, 3):
return False
self.log.append((self.t, "phases", n, self.power_w, self.setpoint_a))
if self.refuse == "ignore":
return True
self._later("phases", n)
return True
def _later(self, what, v):
if self.lag_s <= 0:
self._apply(what, v)
else:
self._pending.append((self.t + self.lag_s, what, v))
def _apply(self, what, v):
if what == "current":
self.setpoint_a = self.readback_a = max(0.0, min(v, self.station_a))
else:
self.phases_allowed = 3 if v == 3 else 1
def writes(self, what=None):
return [x for x in self.log if what in (None, x[1])]
def go_unavailable(self, on=True):
self.unavailable = bool(on)
@@ -94,13 +152,22 @@ class SimCharger:
def tick(self, seconds=1.0):
for _ in range(int(max(1, round(seconds)))):
self.t += 1.0
for p in [x for x in self._pending if x[0] <= self.t]:
self._pending.remove(p)
self._apply(p[1], p[2])
if self.state in ("E", "F"): # a fault: nothing flows, it stays
self.power_w = 0.0
continue
if self.state != "A":
self.state = "C" if self.target_w() > 0 else "B"
if self.target_w() > 0:
self.state, self._c_hold = "C", 0.0
elif self.state == "C" and self._c_hold < self.stop_delay_s:
self._c_hold += 1.0 # the car has not let go yet
else:
self.state = "B"
tgt = self.target_w()
step = RAMP_W_S
step = self.ramp_w_s
if self.power_w < tgt:
self.power_w = min(tgt, self.power_w + step)
else:
@@ -113,7 +180,20 @@ class SimCharger:
if self.phases_used and self.power_w else 0.0)
return [per if i < self.phases_used else 0.0 for i in range(3)]
def freeze(self, on=True):
"""A stuck sensor: Home Assistant goes on serving the readings of this
moment, whatever the charger does after it."""
self._snap = self._build() if on else None
def freeze_power(self, on=True):
"""Only the power sensor sticks, at what it reads now; the energy meter
and the rest go on telling the truth."""
self._frozen_w = self.power_w if on else None
def states(self) -> dict:
return self._snap if self._snap is not None else self._build()
def _build(self) -> dict:
x = self.x
bad = "unavailable" if self.unavailable else None
@@ -134,7 +214,8 @@ class SimCharger:
{"A": "Available", "B": "EV Connected",
"C": "Charging Normal"}.get(self.state, "Error")),
st(f"sensor.{x}_active_power_total_socket_1",
f"{self.power_w:.0f}", "W"),
f"{self.power_w if self._frozen_w is None else self._frozen_w:.0f}",
"W"),
st(f"sensor.{x}_meter_reading_socket_1", f"{self.kwh:.2f}",
"kWh"),
st(f"sensor.{x}_current_l1_socket_1", f"{amps[0]:.1f}", "A"),
@@ -153,7 +234,10 @@ class SimCharger:
"state": bad or ("on" if self.login_on else "off"),
"attributes": {"device_class": "connectivity"}}),
]
return dict(rows)
out = dict(rows)
if self.no_energy:
out.pop(f"sensor.{x}_meter_reading_socket_1", None)
return out
class FakeHa:
@@ -195,10 +279,20 @@ class FakeHa:
async def set_number(self, entity_id, value):
self.sets.append((entity_id, value))
c = self.charger
if c is not None and entity_id == \
f"number.{c.x}_power_connector_max_current_socket_1":
return c.request_current(value)
return True
async def call(self, domain, service, data=None):
self.calls.append((domain, service, data))
c = self.charger
if c is not None and domain == "select" and service == "select_option" \
and (data or {}).get("entity_id") == \
f"select.{c.x}_installation_max_allowed_phases":
return c.request_phases(
3 if "3" in str((data or {}).get("option")) else 1)
return True
def charger_writes(self):
@@ -251,6 +345,22 @@ def _selftest():
assert c.state == "B" and c.power_w == 0 # under 6 A: paused
c.set_current(10); c.car_full(); c.tick(5)
assert c.state == "B" and c.power_w == 0 and c.readback_a == 10
# EV-04: writes, the read-back lag, a refusal
w = SimCharger(); w.plug_in(); w.tick(1)
assert w.request_current(12) and w.setpoint_a == 12
assert not w.request_current(41) and not w.request_current(-1)
w.lag_s = 3.0
assert w.request_current(8) and w.readback_a == 12
w.tick(2); assert w.readback_a == 12
w.tick(1); assert w.readback_a == 8
w.refuse = "ignore"
assert w.request_current(6) and w.readback_a == 8
w.refuse = "error"
assert not w.request_current(6) and not w.request_phases(3)
w.refuse = None; w.lag_s = 0.0
assert w.request_phases(3) and w.phases_allowed == 3
assert [x[1] for x in w.writes()] == ["current", "current", "current",
"phases"], w.writes()
c.go_unavailable()
assert c.states()[f"sensor.wallbox_active_power_total_socket_1"]["state"] \
== "unavailable"
+189
View File
@@ -0,0 +1,189 @@
#!/usr/bin/env python3
"""EV-04: the real Controller on the SAFETY-81 plant, plus a car charger.
python3 tools/ev04_peak.py # a few runs and what they raised
A 1 s cycle, a 3500 W cap, one battery switched Off (so only the peak guard
makes it give, at most `rating` W), a P1 meter that publishes 0.3 s before each
cycle, and `chargersim.SimCharger` behind the same Home Assistant: its power
is part of the load the meter sees, and the add-on reads and writes it through
the real driver. `events` is `{second: fn(plant, controller)}`, run before that
cycle: unplug, freeze the reading, step the house, change the user's current.
Used by test_ev04.py (sections 9 to 11) and, later, by the rig test."""
import asyncio
import logging
import os
import sys
import tempfile
import time
from datetime import timedelta
HERE = os.path.dirname(os.path.abspath(__file__))
sys.path.insert(0, HERE)
import opt11_identity as rig # noqa: E402
import main_files # noqa: E402
import safety81_sim as s81 # noqa: E402
from app import packmode # noqa: E402
from app.main import Controller # noqa: E402
from app.p1 import make_sample, split_signed # noqa: E402
from app.store import unit_key # noqa: E402
from chargersim import SimCharger # noqa: E402
SET = "number.wallbox_power_connector_max_current_socket_1"
PHASES = "select.wallbox_installation_max_allowed_phases"
ALARMS = ("goodwe_peak_saturated", "goodwe_peak_soc_floor")
OVER = "goodwe_car_over"
class CarPlant(s81._Plant):
"""The SAFETY-81 plant with a charger on the same meter: the grid sees the
house, the car and what the battery does."""
def __init__(self, house, rating, soc, charger):
super().__init__(lambda at: house(at) + charger.power_w, rating, soc)
self.ch = charger
async def state(self, entity_id):
return self.ch.states().get(entity_id)
async def set_number(self, e, v):
if e == SET:
return self.ch.request_current(float(v))
return await super().set_number(e, v)
async def call(self, domain, service, data=None):
if domain == "select" and service == "select_option":
n = 3 if "3" in str((data or {}).get("option")) else 1
return self.ch.request_phases(n)
return await super().call(domain, service, data)
class CarPlantN(CarPlant):
"""EV-10b: N batteries, each its own setpoint, power and SoC (`soc` is a
dict {"a": %, "b": %}); `rating` is per battery. The grid sees them all."""
def __init__(self, house, rating, soc, charger):
super().__init__(house, rating, 0.0, charger)
self.socs = dict(soc)
self.hists = {u: [(-1e9, 0.0)] for u in self.socs}
def batt_of(self, u, at):
w = 0.0
for when, v in self.hists[u]:
if when <= at:
w = v
return max(-self.rating, min(self.rating, float(round(w))))
def batt(self, at):
return sum(self.batt_of(u, at) for u in self.socs)
async def number(self, e, invert=False):
for u in self.socs:
if e == "sensor.soc_" + u:
return self.socs[u]
if e == "sensor.batt_" + u:
return self.batt_of(u, self.t)
return await super().number(e, invert)
async def set_number(self, e, v):
if e.startswith("number.sp_"):
self.hists[e[-1]].append((self.t + s81.RESPONSE_S, float(v)))
return True
return await super().set_number(e, v)
def drive(house, *, dur=300.0, rating=2000.0, soc=60.0, cap=3500.0, margin=50,
opts=None, plug=True, setpoint=16, phases=3, mode="manual",
user_a=16, events=None, sim=None, store=None, n=1, plant_cls=None,
dev_w=5000.0):
"""Run it. Returns a namespace-like dict: plant, controller, charger, the
notification ids raised with their second, and the controller's rows."""
sim = sim or SimCharger(setpoint_a=setpoint)
if plug:
sim.plug_in()
sim.phases_allowed = phases
o = rig._options(n, dict({
"meter_source": "ha_signed", "p1_net_entity": "sensor.net",
"meter_phases": 1, "peak_cap_w": cap, "peak_margin_w": margin,
"battery_modes_enabled": True, "max_w": rating,
"ev_charger": "alfen_ha", "ev_max_a": 16, "ev_phases": "auto",
"ev_current_entity": SET}, **(opts or {})))
store = store or rig._Store()
for u in "ab"[:n]:
store.data[unit_key("inverter-" + u, packmode.USE_KEY)] = False
store.data[packmode.USE_KEY] = False
db = os.path.join(tempfile.mkdtemp(prefix="ev4-"), "tariff.db")
out = {}
async def go():
plant = (plant_cls or CarPlant)(house, rating, soc, sim)
c = Controller(o, plant, store, rig._Pub(), stop=asyncio.Event(),
peak_db_path=db)
for i in c.inverters:
i.dev_min, i.dev_max = -dev_w, dev_w
c.auto = True
clock = [0.0]
c.car_now = lambda: clock[0]
if hasattr(c.charger, "_sleep"):
async def sleep(s):
sim.tick(s)
clock[0] += s
c.charger._sleep = sleep
c.charger._clock = lambda: clock[0]
real_dt = main_files.live.datetime
class _DT(real_dt):
@classmethod
def now(cls, tz=None):
return rig.BASE + timedelta(seconds=clock[0])
main_files.live.datetime = _DT
c.car_mode, c.car_n, c.car_a = mode, phases, float(user_a)
snaps = []
try:
t = 0.0
while t < dur:
plant.t = clock[0] = t
fn = events_in.get(int(t)) if t == int(t) else None
if fn is not None:
fn(plant, c)
sim.tick(1.0)
ts = t - s81.SAMPLE_LEAD_S
plant.meter = plant.grid(ts)
imp, exp = split_signed(plant.meter)
c.p1.submit(make_sample(
"ha_signed", imp, exp, phases=1,
ingest_ts=rig.BASE + timedelta(seconds=ts),
ingest_mono=time.monotonic()))
await c.read_inputs(now_mono=t)
await c.cycle()
await c.car_settle()
snaps.append((t, c.car_explains, c.car_over,
(c.peak_guard.engaged if c.peak_guard else None),
plant.batt(t), sim.power_w))
t += s81.TICK
finally:
main_files.live.datetime = real_dt
raised = [(at, nid) for at, nid in plant.notes]
out.update(plant=plant, c=c, sim=sim, raised=raised, snaps=snaps,
store=store)
events_in = events or {}
asyncio.run(go())
return out
def ids(out, *wanted):
return [(t, n) for t, n in out["raised"] if n in wanted]
if __name__ == "__main__":
logging.disable(logging.CRITICAL)
for name, kw in (
("car 11 kW, house 1.1 kW, Manual",
dict(house=s81.constant(1100.0))),
("same, Off", dict(house=s81.constant(1100.0), mode="off"))):
r = drive(**kw)
print(f"{name:34s} alarms {ids(r, *ALARMS)} "
f"car notice {ids(r, OVER)}")
+290
View File
@@ -0,0 +1,290 @@
#!/usr/bin/env python3
"""EV-05: the real Controller on a sunny plant with N batteries and a car.
python3 tools/ev05_sun.py # mock-up scenario 2, both priorities
A 1 s cycle, a P1 meter that publishes 0.3 s before each cycle, N batteries
each with ITS OWN rating and level (switched On, so the zero-grid loop charges
them from the export), and `chargersim.SimCharger` behind the same Home
Assistant. The meter sees `house + car - sun - batteries` (battery discharge
positive), so the spare sun the add-on computes is `sun - house` whatever it
does. A battery at 100 % takes no charge. `events` is `{second: fn(plant, c)}`,
run before that cycle. `race=True` uses the production order (read, the writer
task settles, then the cycle), as test_ev04.py's `World.step_race`.
Used by test_ev05.py and, later, by the rig test."""
import asyncio
import logging
import os
import sys
import tempfile
from datetime import timedelta
HERE = os.path.dirname(os.path.abspath(__file__))
sys.path.insert(0, HERE)
import opt11_identity as rig # noqa: E402
import main_files # noqa: E402
from app import packmode # noqa: E402
from app.main import Controller # noqa: E402
from app.p1 import make_sample, split_signed # noqa: E402
from app.store import unit_key # noqa: E402
from chargersim import SimCharger # noqa: E402
from app import p1 as _p1 # noqa: E402
SET = "number.wallbox_power_connector_max_current_socket_1"
PHASES = "select.wallbox_installation_max_allowed_phases"
ALARMS = ("goodwe_peak_saturated", "goodwe_peak_soc_floor")
RESPONSE_S = 0.5 # a battery reaches its new command this much later
SAMPLE_LEAD_S = 0.3
class SunPlant:
"""The house, the sun, N batteries and the charger on one meter."""
def __init__(self, house, sun, ratings, socs, charger):
self.house, self.sun = house, sun
self.ratings, self.socs = dict(ratings), dict(socs)
self.ch = charger
self.t = 0.0
self.hists = {u: [(-1e9, 0.0)] for u in self.ratings}
self.notes = [] # (t, notification id) raised
self.dismissed = []
self.sets = [] # (t, entity, value): every number write
# Every charger write the model took, as `SimCharger.log` has it but
# on THIS clock (the model's own runs ahead while a write waits).
self.wlog = []
self.meter = 0.0
self.meter_on = True # False: the meter stops publishing
self.batt_nan = set() # units whose battery figure reads None
self.utc_off = 0.0 # the wall clock jumps, the model clock not
self.ha_down = False # Home Assistant answers nothing (SAFETY-112)
def batt_of(self, u, at):
w = 0.0
for when, v in self.hists[u]:
if when <= at:
w = v
r = self.ratings[u]
w = max(-r, min(r, float(round(w))))
if self.socs[u] >= 100.0 and w < 0.0:
w = 0.0 # a full battery takes no charge
return w
def batt(self, at):
return sum(self.batt_of(u, at) for u in self.ratings)
def grid(self, at):
return self.house(at) + self.ch.power_w - self.sun(at) - self.batt(at)
# -- Home Assistant -----------------------------------------------------
async def limits(self, e):
return (-5000.0, 5000.0, 1.0)
async def state(self, entity_id):
if self.ha_down:
return None
return self.ch.states().get(entity_id)
async def states(self):
if self.ha_down:
return []
return list(self.ch.states().values())
async def call(self, domain, service, data=None):
if self.ha_down:
return False
if service == "create":
self.notes.append((self.t, (data or {}).get("notification_id")))
if service == "dismiss":
self.dismissed.append((self.t, (data or {}).get("notification_id")))
if domain == "select" and service == "select_option":
n = 3 if "3" in str((data or {}).get("option")) else 1
return self._logged("phases", n, self.ch.request_phases)
return True
def _logged(self, what, v, fn):
n0, row = len(self.ch.log), (self.t, what, v, self.ch.power_w,
self.ch.setpoint_a)
ok = fn(v)
if len(self.ch.log) > n0:
self.wlog.append(row)
return ok
async def number(self, e, invert=False):
if self.ha_down:
return None
for u in self.ratings:
if e == "sensor.soc_" + u:
return self.socs[u]
if e == "sensor.batt_" + u:
return None if u in self.batt_nan else self.batt_of(u, self.t)
if e in ("sensor.grid", "sensor.net"):
return self.meter
return None
async def set_number(self, e, v):
if self.ha_down:
return False
self.sets.append((self.t, e, float(v)))
if e == SET:
return self._logged("current", float(v), self.ch.request_current)
if e.startswith("number.sp_"):
self.hists[e[-1]].append((self.t + RESPONSE_S, float(v)))
return True
def drive(house, sun, *, dur=600.0, ratings=None, socs=None, cap=3500.0,
margin=100, opts=None, plug=True, setpoint=0, phases=1, mode="solar",
first="batteries", events=None, sim=None, store=None, race=False,
on_cycle=None, car_phases=3, t0=0.0, caps=None):
"""Run it. Returns a dict: plant, controller, charger, notifications with
their second, and a per-second trace. `caps` ({unit: kWh}) lets each
battery's level move with what it charges or gives; without it the
levels stand still."""
ratings = ratings or {"a": 5000.0, "b": 4600.0}
socs = socs or {u: 50.0 for u in ratings}
sim = sim or SimCharger(setpoint_a=setpoint)
if plug:
sim.plug_in(car_phases=car_phases)
sim.phases_allowed = phases
units = sorted(ratings)
o = rig._options(len(units), dict({
"meter_source": "ha_signed", "p1_net_entity": "sensor.net",
"meter_phases": 1, "peak_cap_w": cap, "peak_margin_w": margin,
"battery_modes_enabled": True,
"ev_charger": "alfen_ha", "ev_max_a": 16, "ev_phases": "auto",
"ev_current_entity": SET}, **(opts or {})))
if len(units) == 1:
o["max_w"] = ratings[units[0]]
else:
o["inverters"] = [dict(x, max_w=ratings[x["name"][-1]])
for x in o["inverters"]]
store = store or rig._Store()
store.data["car_mode"] = mode
store.data["car_sun_first"] = first
for u in units:
store.data[unit_key("inverter-" + u, packmode.USE_KEY)] = True
db = os.path.join(tempfile.mkdtemp(prefix="ev5-"), "tariff.db")
out = {}
events_in = events or {}
async def go():
plant = SunPlant(house, sun, ratings, socs, sim)
c = Controller(o, plant, store, rig._Pub(), stop=asyncio.Event(),
peak_db_path=db)
for i in c.inverters:
r = ratings[i.name[-1]] if len(units) > 1 else ratings[units[0]]
i.dev_min, i.dev_max = -r, r
c.auto = True
clock = [t0]
c.car_now = lambda: clock[0]
real_time = _p1.time
class _Time:
"""The meter's age on the model clock, so a silent meter goes
stale in model seconds."""
def __getattr__(self, k):
return getattr(real_time, k)
@staticmethod
def monotonic():
return clock[0]
_p1.time = _Time()
if hasattr(c.charger, "_sleep"):
async def sleep(s):
sim.tick(s)
clock[0] += s
c.charger._sleep = sleep
c.charger._clock = lambda: clock[0]
real_dt = main_files.live.datetime
class _DT(real_dt):
@classmethod
def now(cls, tz=None):
return rig.BASE + timedelta(seconds=clock[0] + plant.utc_off)
main_files.live.datetime = _DT
trace = []
try:
t = t0
while t < t0 + dur:
plant.t = clock[0] = t
fn = events_in.get(int(t)) if t == int(t) else None
if fn is not None:
r = fn(plant, c)
if asyncio.iscoroutine(r):
await r
sim.tick(1.0)
ts = t - SAMPLE_LEAD_S
if plant.meter_on and not plant.ha_down:
plant.meter = plant.grid(ts)
imp, exp = split_signed(plant.meter)
c.p1.submit(make_sample(
"ha_signed", imp, exp, phases=1,
ingest_ts=rig.BASE + timedelta(seconds=ts),
ingest_mono=ts))
await c.read_inputs(now_mono=t)
if race:
await c.car_settle()
await c.cycle()
else:
await c.cycle()
await c.car_settle()
w = c.car_solar
g = c.peak_guard
trace.append(dict(
t=t, a=w.plan.a, why=w.plan.why, n=w.plan.n,
sp=sim.setpoint_a, rb=sim.readback_a,
ph=sim.phases_allowed, car=sim.power_w, st=sim.state,
grid=plant.grid(t), batt=plant.batt(t),
house=plant.house(t), sun=plant.sun(t),
cut=c.car_cut_w, explains=c.car_explains,
lim=bool(g is not None and (g.floor_limited
or g.saturated)),
floor=(None if g is None else g.floor_w),
excess=(None if g is None else g.excess_w),
proj=(None if g is None else g.projected_w),
target=(None if g is None else g.target_w),
would=w.would, single=w.single,
spare=c.car_spare_w(t), ok=w.plan.ok_since,
red=[x["id"] for x in c.checks()
if x["ok"] is False and not x["warn"]]
if on_cycle == "rows" else []))
if callable(on_cycle):
on_cycle(plant, c, t)
for u, kwh in (caps or {}).items():
lv = plant.socs[u] - plant.batt_of(u, t) / 36.0 / kwh
plant.socs[u] = max(0.0, min(100.0, lv))
t += 1.0
await c.car_settle()
finally:
main_files.live.datetime = real_dt
_p1.time = real_time
out.update(plant=plant, c=c, sim=sim, trace=trace, store=store,
raised=list(plant.notes))
asyncio.run(go())
return out
def ids(out, *wanted):
return [(t, n) for t, n in out["raised"] if n in wanted]
def writes(out, what="current"):
"""(t, value) of every charger write of that kind, in model seconds."""
return [(x[0], x[2]) for x in out["sim"].writes(what)]
def const(w):
return lambda t: float(w)
if __name__ == "__main__":
logging.disable(logging.CRITICAL)
for first in ("batteries", "car"):
r = drive(const(900.0), const(7900.0), dur=600, first=first,
socs={"a": 71.0, "b": 100.0})
print(f"scenario 2, {first} first: writes {writes(r)} phases "
f"{writes(r, 'phases')} batteries {r['plant'].batt(599):.0f} W "
f"grid {r['plant'].grid(599):.0f} W")
+23 -2
View File
@@ -109,7 +109,7 @@ class Hass:
# real `Controller._read_charger()` reads it, so the card is what the add-on
# draws, not a picture.
CAR_STATES = ("car", "car_none", "car_waiting", "car_full", "car_unreach",
"car_setup")
"car_setup", "car_manual_cover", "car_manual_over")
CAR_ENTITY = "number.wallbox_power_connector_max_current_socket_1"
SIM = SimCharger()
@@ -126,7 +126,7 @@ def car_setup(state):
"""Put the model in the state's situation."""
global SIM
SIM = SimCharger(name="other" if state == "car_setup" else "wallbox")
if state in ("car", "car_unreach"):
if state in ("car", "car_unreach", "car_manual_cover", "car_manual_over"):
SIM.plug_in()
SIM.set_phases(3)
SIM.set_current(16)
@@ -332,6 +332,27 @@ def controller(state):
for inv in c.inverters:
inv.batt = 0.0
c.car.stale_s = 15.0
if state in ("car_manual_cover", "car_manual_over"):
# EV-04, Manual at 16 A on 3 phases. First moment: the batteries give
# 5 kW and the period stays on the aim. Second: they are at the peak
# reserve, so the charge you set sets the month's peak.
c.car_mode, c.car_a, c.car_n = "manual", 16.0, 3
if state == "car_manual_cover":
c.pv_w, c.grid = 4100.0, 3450.0
for inv in c.inverters:
inv.batt = 2500.0
c.peak_guard = PeakDecision(
engaged=True, floor_w=3000.0, ceiling_w=3500.0,
ceiling_from="cap", projected_w=3450.0, excess_w=1500.0)
else:
c.pv_w, c.grid = 2400.0, 10200.0
for inv in c.inverters:
inv.soc, inv.batt = 19.0, 0.0
c.peak_guard = PeakDecision(
engaged=True, floor_w=0.0, ceiling_w=3500.0,
ceiling_from="cap", projected_w=10200.0, excess_w=6750.0,
floor_limited=True, soc=19.0, soc_floor=20.0)
c.car_over = c.car_explains = True
if state == "alarm":
c.inverters[0].sign_wd.tripped = True
if state in P3:
+16 -1
View File
@@ -285,7 +285,7 @@ configuration:
description: "The add-on makes every decision but keeps every inverter at 0 W. 'auto' does this while control is stopped, 'on' always, 'off' never."
ev_charger:
name: "Car charger · Charger"
description: "Which car charger the add-on reads. Off leaves everything as it is. This version only reads the charger and never changes it."
description: "Which car charger the add-on drives. Off leaves everything as it is. In Off mode the add-on only reads the charger and never changes it."
ev_current_entity:
name: "Car charger · Current setting entity"
description: "The entity that sets the charger's current. The add-on finds the charger's other entities from its name."
@@ -295,6 +295,21 @@ configuration:
ev_phases:
name: "Car charger · Phases"
description: "How many phases the charger may use: 1, 3, or 1 and 3 (auto)."
ev_batt_cover:
name: "Car charger · Batteries help with the peak"
description: "While the car charges. On: the batteries cover it down to the peak reserve. Off: the peak guard leaves the car out, so the car alone can set the peak."
ev_mode_start:
name: "Car charger · Mode after a restart"
description: "Keep the last mode, or start in Off. In Solar a restart sets the charger to 0 A first, other modes leave its current."
ev_margin_w:
name: "Car charger · Sun kept back (W)"
description: "Solar: this much spare sun is never given to the car."
ev_start_min:
name: "Car charger · Start after (minutes)"
description: "Solar: the car starts after this long with enough spare sun."
ev_pause_min:
name: "Car charger · Pause after (minutes)"
description: "Solar: with too little sun the car holds 6 A this long, then pauses."
auto_start:
name: "Advanced · Start control on boot"
description: "Off by default. Leave it off until the site is commissioned, so someone presses Start after each restart."
+16 -1
View File
@@ -266,7 +266,7 @@ configuration:
description: "De add-on neemt elke beslissing maar houdt elke omvormer op 0 W. 'auto' doet dit zolang de regeling gestopt is, 'on' altijd, 'off' nooit."
ev_charger:
name: "Laadpaal · Laadpaal"
description: "Welke laadpaal de add-on leest. Uit laat alles zoals het is. Deze versie leest de laadpaal alleen en wijzigt niets."
description: "Welke laadpaal de add-on stuurt. Uit laat alles zoals het is. In modus Uit leest de add-on de laadpaal alleen en wijzigt niets."
ev_current_entity:
name: "Laadpaal · Entiteit van de laadstroom"
description: "De entiteit die de stroom van de laadpaal instelt. De add-on vindt de andere entiteiten van de laadpaal via de naam."
@@ -276,6 +276,21 @@ configuration:
ev_phases:
name: "Laadpaal · Fasen"
description: "Hoeveel fasen de laadpaal mag gebruiken: 1, 3, of 1 en 3 (auto)."
ev_batt_cover:
name: "Laadpaal · Batterijen helpen met de piek"
description: "Terwijl de auto laadt. Aan: de batterijen dekken ze tot de piekreserve. Uit: de piekbewaking laat de auto buiten beschouwing, dus de auto alleen kan de piek bepalen."
ev_mode_start:
name: "Laadpaal · Modus na een herstart"
description: "De laatste modus houden, of starten in Uit. In Zon zet een herstart de laadpaal eerst op 0 A, andere modi laten haar stroom."
ev_margin_w:
name: "Laadpaal · Zon achtergehouden (W)"
description: "Zon: zoveel zonne-overschot krijgt de auto nooit."
ev_start_min:
name: "Laadpaal · Starten na (minuten)"
description: "Zon: de auto start na zo lang genoeg zonne-overschot."
ev_pause_min:
name: "Laadpaal · Pauzeren na (minuten)"
description: "Zon: met te weinig zon houdt de auto zo lang 6 A en pauzeert dan."
auto_start:
name: "Geavanceerd · Regeling starten bij opstarten"
description: "Staat standaard uit. Laat het uit tot de installatie in dienst is, zodat iemand na elke herstart op Start drukt."