Comment, docstring and DECISIONS only (same-code script OK; python -OO
bytecode now identical for all six files).
- peakguard.charge_room_w: one-line docstring + SAFETY-125 pointer (cut whole).
- peakguard.shaping_suspended: keep 'the one place this conjunction is
written; do not inline it'.
- price_forecast module note: an hour with no price and no yesterday is left
out, never filled (test_price.py 14d cites the module note for it).
- Refill comment blocks the cut left ragged; DECISIONS pointers on one line.
- FCST-04 note: _yesterday_of(), not _previous_day(); FCST-03 note: the 49
stronger cases are why the rule is a real change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC
- F1: an expired latch is dropped whatever the run state; plan_targets() and the
store loader ignore one that has ended (no stale latch after a restart).
- F2: the "charge goes on" line only while a cheap run is on.
- F3: a battery that is off or no longer Leftover solar leaves the latch.
- F4: a run carries the latch on only if it starts by the bell start (06:00
local) after the latch began (manager's call, 2026-10-31).
Tests: test_opt34 scenarios stale/stale_live and part 5; test_modes_p4 asks at a
moment inside the latch.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC
test_opt34.py part 4 drives Controller._latch_charge() directly: a battery
that leaves the plan is dropped at once, does not rejoin while nothing
charges, an empty latch is cleared from the store, and the screen says the
charge goes on only while the latched battery is below its level. Catches
two reviewer mutants that survived the round-2 tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While a forecast is present and the cheap run holds, the night-charge latch is
rebuilt from the plan: a latched battery takes its current level whatever its
role this tick (a fresh figure may lower it below the SoC), one that left the
plan is dropped, a new one comes in only while it charges from the grid.
Test: a fresh brighter figure lowers A below its SoC, the sensors go quiet, A
does not charge back up. CHANGELOG summary says two fixes.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC
With the forecast sensors silent from 17:05 the kept evening figure ended at
midnight + 3 h, in the middle of the night grid charge, and Leftover solar's
planned level went with it (rig: A 49.8 % against 79.9 %).
- A night grid charge that has started keeps its planned level when the forecast
goes (Controller._latch_charge, store key night_charge_latch), and the narrow
price gap with it (weather_held). A fresh figure still moves the level.
- The evening's tomorrow figure is today's until the bell starts (06:00 local),
up to 15 h old but only if it was usable at midnight (solarfc.Hold.stand_in).
- Screen: "No solar forecast now. The charge under way goes on to its planned
level." (EN/NL) while a latched battery is below its level.
- test_opt34.py (whole nights through the real control cycle, mutants), test_opt27
and test_modes_p4 adjusted to the new window and the kept level.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC
Text only (DECISIONS, DOCS, CHANGELOG): a step load alarms on the same cycle
as before; a steadily rising load alarms a little later; with peak_margin_w 0
a period can end up to 10 W over the limit without this alarm, as for 'Load
too high' (SAFETY-81). Owner accepted 2026-10-31.
test_safety126.py part 2: after a real overrun ends, _peak_landing()'s latch
is reset and the night's later landings are quiet (review F3).
Co-Authored-By: Claude <noreply@anthropic.com>
During the night grid charge under the peak reserve the guard alarmed
(ERROR PEAK_GUARD_FLOOR_LIMITED, "Battery stopped limiting the peak") and the
Batteries "Why" said "The peak limit needs power" at quarter ends, while every
quarter landed on the aim. The charge lands the period 0-7 W over the aim and
excess_w()'s 900 / remaining turns that into tens of kW in the last second;
with nothing able to give, check_peak_floor_limited() alarmed on any
wanted > 0.
Each cycle the guard wants power, _peak_landing() asks misses_aim(): with the
batteries at 0 W, does the period end more than ALARM_MISS_W over the aim? If
not, the decision is within_aim: no reserve alarm, no red peak row, no "Why"
peak. The claim and the commands are unchanged. A real overrun under the
reserve alarms on the same cycle as before.
Co-Authored-By: Claude <noreply@anthropic.com>
F1: the evening rule has an age limit (KEPT_MAX_AGE_S).
F2: the evening bound is the next local midnight (_bounds), right on 25 h and 23 h days.
F5: test that old days are dropped from the stored hold.
Co-Authored-By: Claude <noreply@anthropic.com>
With battery modes off the forecast is still read and shown (Settings,
Simple, and the Forecast tab), but no plan uses it, so "used for tonight's
plan" was not true there (UX-53). "Kept for tonight" is true in every
shape. NL "vanavond" read wrong after midnight; "vannacht" covers the
whole night. DECISIONS' "modes off: nothing reads the sensors" corrected.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC
Hold.stand_in(): day0 <= now < day0 + 3 h. A tomorrow sensor is asked with
day0 = the next midnight, so the upper bound alone was true all day and a
figure stood in at any hour. test_opt27.py covers daytime tomorrow outages.
Co-Authored-By: Claude <noreply@anthropic.com>
test_modes_p4.py: 'the forecast is lost mid-run' now loses it for good (a hold
that never covers); a second scenario is the same loss with the hold, which
keeps Leftover solar charging. test_opt27.py: a failing check no longer hides
the ones after it.
Co-Authored-By: Claude <noreply@anthropic.com>
Forecast.Solar's sensors stop updating in the evening, so at night every such
site had no forecast: the night cheap run needed 1.5x the cycle cost and
Leftover solar planned nothing. One missed poll also dropped it at once.
solarfc.Hold keeps the last fresh reading of each sensor, for the day it is
for. A missing or stale sensor is covered by it for up to FRESH_S (a short
outage), and from the end of the bell (20:00) until local midnight + 3 h
however old. A tomorrow figure is tomorrow's until midnight and then today's;
a today figure is only today's. Stored in the controller's store
(solar_fc_hold), so an evening restart keeps it. The forecast line says
'Solar forecast read 17:05, used for tonight's plan.' (EN, NL).
test_tariff24_weather.py runs with a hold that never covers: it tests what the
plan does when the forecast IS lost.
Co-Authored-By: Claude <noreply@anthropic.com>
UX-54's Forecast tab (release/1.0) re-plans tomorrow's cheap run as control
will, with the gap `required`. It still added the "no weather" x1.5 always,
while control (TARIFF-24, from master) drops it when a forecast is read. In
the UX-54 scenarios the tab asked 0.225 where control needs 0.15. It now asks
`arbitrage.weather_uncertainty(True, c.solar_fc)`, so the two agree again, as
they did on release/1.0 alone. Display only; no control change. The tab's
blocks in every UX-54 scenario, every 2 h, are identical to release/1.0.
test_ux54.py pins it (the old line fails it). The TARIFF-24 DECISIONS note
names the tab as the fourth place that reads the rule.
Co-Authored-By: Claude <noreply@anthropic.com>
- TARIFF-24 DECISIONS: the hold keeps a Cheap hours charge; a Leftover solar
battery still stops without a forecast (it has no planned level, still true
after OPT-28: `dayplan.plan()` returns None and `charge_to()` gives None).
Adds "a run that has started runs to its end" for a give run begun in a hold.
- CHANGELOG 0.19.2: "when the period is over" -> "when the period would go
over the limit".
Co-Authored-By: Claude <noreply@anthropic.com>
Part 6 of test_tariff24_weather.py, the review's probes R4 and R5:
- R4: a forecast lost while only the day's give run is under way holds to
that run's end (22:00) and no further; the night's cheap run then needs the
wider gap. Pins the `solar_fc is None` return in `_wx_track()`: without it
the hold chains into the cheap run and B charges (mutant M2, now red).
- R5: a give run that starts during a hold runs to its end (`keep_started()`),
with no grid charge after the hold. Behaviour unchanged; a give run not kept
goes red.
Co-Authored-By: Claude <noreply@anthropic.com>
With master merged in (TARIFF-24), a forecast replaces the 1.5x widening, so
the shipped cost 0.10 is now the whole gap with a forecast. test_ux54.py's
modes-on scenarios were written for 0.15 and 21 of its checks failed on
release/1.0 + master (they pass on release/1.0 alone). They now set the cost
to 0.15 where they have a forecast: the same gate as before. Scenarios with no
forecast (nofc, stale) and modes off keep 0.10, widened as before.
(cherry picked from commit 665653517c, branch OPT-27)
Co-Authored-By: Claude <noreply@anthropic.com>
Brings in 0.19.1 (TARIFF-24) and 0.19.2 (SAFETY-125). Git merged every file
without a text conflict. config.yaml's version becomes 0.19.2, the newest
CHANGELOG section: test_version_gate.py (PKG-14, 11b) requires the two to be
equal, and release/1.0 took 0.19.0 the same way (#207). The 0.19.1 and 0.19.2
CHANGELOG sections come in as history.
Co-Authored-By: Claude <noreply@anthropic.com>
With A on Leftover solar and B on Cheap hours (the dynamic scenario, and the
owner's planned setup), the line said "The batteries cannot hold it all. The
grid covers N kWh", while B holds a full charge for the same hours. It now
says "The expensive hours need more than Leftover solar can hold. The rest,
N kWh, comes from another battery or the grid." (NL likewise). DOCS,
DECISIONS and the dayplan/homeview docstrings say the same. Text only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC
Its status page says "Meter: no reading for N seconds, limit 30 seconds" when
N passes 30; N is about half the file's run time. It failed alone under
--cpus 0.15 (94 s), in a loaded local parallel run (103 s) and in a loaded CI
run (112 s, run 1434). Idle it takes ~25 s. No test file changed, so it runs
alone after the parallel batch, like test_loop.py and test_freeze.py.
Co-Authored-By: Claude <noreply@anthropic.com>
OPT-23: a state-only forecast is read from now for every span
(Forecast.between since=), so the plan's per-hour sun adds up to the day's
figure, today and tomorrow. Hourly splits are unchanged. The Forecast tab
reads spans the same way.
OPT-28: a Leftover solar battery buys, from the floor, the sum over the
expensive hours of max(0, house - trust x sun), / EFF. Several Leftover
solar batteries hold it together by capacity, the ceiling passes the rest
on, and what none can hold is said (Plan.uncovered_kwh). Home's grid block,
the Batteries line and the mode help (EN + NL) say the level, what it
covers, and that Leftover solar buys only what the sun will not give.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC
The serial loop summed 3 557 s on SAFETY-125's run and passed the runner's
60-minute cap. The loop moves to .gitea/ci/run-tests.sh: xargs -P 6, longest
files first, then test_loop.py and test_freeze.py (TEST-30 / CI-06) alone on an
idle machine. Same PASS/FAIL lines, CI: echo, tail -40, :ro mount,
PYTHONDONTWRITEBYTECODE=1, GOODWE_REQUIRE_HWSIM=1 and NO test_*.py FOUND guard;
one output file per test file; any failing or unreported file fails the job.
timeout-minutes 70 -> 40, comment corrected. No test file changed.
Co-Authored-By: Claude <noreply@anthropic.com>
admin