4 Commits

Include renames

Author	SHA1	Message	Date
glenn schrooyenandClaude	0d49027daa	MAINT-21: tests read and patch the Controller through tools/main_files.py ... Prepares the split of app/main.py's Controller into files by job, with no app change. tools/main_files.py gives a test the text and the AST of main.py plus the files split from it, and `live`, which sets a global in every file whose functions read it (and raises when none does). Tests that read main.py's source, and tests and replay tools that patch a main global (datetime, compute, resolve, _mono, WRITE_BUDGET_S, ...), go through it, so they pass on this layout and on the split one. test_split_patches.py fails when a test or tool patches an app.main attribute that main.py no longer reads, or that another file also reads. tools/maint21_same_ast.py proves every function, method and module-level assignment of main.py at the base is found unchanged in its new file. Co-Authored-By: Claude <noreply@anthropic.com>	2026-11-09 00:27:07 +01:00
glenn schrooyenandClaude	f0b4e68e49	SAFETY-118: read the peak forecast in its own unit ... peak_forecast_entity is read through pv.watts() by its unit_of_measurement; the abs(raw) < 50 size rule is gone. No unit or a non-power unit means the forecast is not used, with one warning per cause. The validator no longer claims a kW sensor is taken as watts for this entity. Co-Authored-By: Claude <noreply@anthropic.com>	2026-10-16 16:00:34 +02:00
glenn schrooyenandClaude Opus 5.5	ffc9a4d721	OPT-11 P1 review: a mode never beats the peak floor; SAFETY-03 kept at the rail ... - arbiter: a mode now gives way only as far as a site limit above P_MODE needs (_unit_modes at N>1, _site_mode at N=1). Before, the modes were released only when the peak floor bound S, so a trade won above the floor kept them and placed less than the floor (an Off battery at N=1 went to 0 W under a 2000 W floor), and a capped grid charge released an Off battery. While released, held batteries weigh 0 and carry only the shortfall. - control: a side of the loop bound that reaches the rail is left to the rail, so SAFETY-03's i_clamped still fires with every battery on. - opt11_identity: add maintenance scenarios and a 6000-case arbiter digest (peak floor, trades, maintenance, refusals); a5dddad digests pinned. - tests: test_arbiter part 11, test_control (g), test_modes (0/1 refused, loop bound counts live units only). DOCS and DECISIONS say the new rule. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01UBtqPrG1mDLXzTEBnhEkkV	2026-09-28 19:41:36 +02:00
Claude dev agent	d69fd8fbfd	OPT-11 P1: per-battery mode limits, on/off, solar order ... A battery's mode is a soft unit limit (source `mode`, P_MODE 35) kept apart from the hard limits in pre_resolve(). The allocator applies it only while the site target is decided at or below 35 (new Resolution.deciding_priority), so the peak floor releases it and a mode `hi` never meets the site `lo`. At N=1 resolve() applies the same rule to the site target after stage 2. A mode range without 0 W is dropped as a software fault, so REFUSE_SIGN stays unreachable from a mode. compute() gets the loop bound (sum over live units of hard limits with modes applied), so the loop never asks for watts no battery may give and the saturation freeze never parks on them. While charging, Leftover solar weighs 0 so Solar first fills first. Store keys pack_use and pack_mode per battery, set by two new /action values; Off stops and skips maintenance with a log line. Minimal Batteries cards (EN/NL). Off by default (battery_modes_enabled); off, commands are byte-identical to a5dddad at N=1 and N=2 (test_modes.py part 1). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-28 18:51:29 +02:00