OPT-11 P2: HA entities for battery modes (#152)

goodwe_controller/DECISIONS/OPT-11-battery-modes.md

@@ -17,5 +17,16 @@ P1 is its section 6 P1, and the pull request lists what was measured.
   capped grid charge release an Off battery. Both are graded in
   `test_arbiter.py` part 11. The loop bound leaves a side that reaches the
   rail to the rail, so SAFETY-03 still flags a loop winding into it.
+- P2 (HA entities): a select and a switch per battery, only while modes are
+  on; commands go through `handle_action()`, the page's path. A retained
+  command is dropped, not applied: the store already holds the last choice,
+  and a replay after a restart could otherwise undo a newer one. The config
+  topics announced are kept in the store (`mqtt_mode_configs`), so turning
+  modes off removes exactly those, and an install that never turned them on
+  publishes what ed739d4 did (`test_mqtt.py` part 10). A removed topic stays
+  in that list and its empty config is re-sent on each start, so a start with
+  no broker cannot lose it; re-sending is harmless. The HA options are the
+  page's English names, pinned by a test, and are not renamed with the page:
+  automations send them.
 - In P1 only Off closes a direction; Leftover solar differs by charging last.
   Price runs, selling (`pack_sell`, reserved) and the forecast are P3/P4.

goodwe_controller/DOCS.md

@@ -522,6 +522,10 @@ Off by default. Turn it on, restart the add-on, and the Batteries screen (and Se
 
 The peak limit, the safety stops and the monthly cycle always come before a battery's mode.
 
+**In Home Assistant.** With MQTT set up, each battery also gets a *Mode* list and a *Use* switch, for example `select.goodwe_inverter_a_mode` and `switch.goodwe_inverter_a_use`. They do the same as the Batteries screen. Turn battery modes off and restart, and they are removed.
+
+*For installers:* commands arrive on `goodwe_ctl/unit/<battery>/mode/set` (a *Mode* option, such as `Solar first`) and `.../use/set` (`ON` or `OFF`). They go through the same checks as the Batteries screen. A refusal is logged once, and later refusals are counted in the log. A retained command is never applied, so the broker cannot replay an old choice after a restart; the add-on keeps the last choice itself.
+
 *For installers:* a mode is a limit at priority 35, kept apart from the hard limits. It gives way only as far as a limit above it (the peak guard) needs. A mode range always holds 0 W, so a mode can forbid a direction and never force one. With one inverter the mode also bounds the loop. The record is `DECISIONS/OPT-11-battery-modes.md`.
 
 ### Reading the grid-following loop: `Loop integrator`, `Loop integrator lead`, `Loop reason`

goodwe_controller/app/main.py

@@ -72,8 +72,9 @@ from .maintenance import (
     IDLE, POWER_MOVING, MaintConfig, Maintenance, MaintResult,
     arbitrate as maint_arbitrate,
 )
-from .mqtt import (MqttPublisher, announced_units, optional_keys, unit_slugs,
-                   unit_state_key)
+from .mqtt import (MODE_CONFIGS_KEY, MODE_LABELS, USE_OFF, USE_ON,
+                   MqttPublisher, announced_units, mode_configs,
+                   optional_keys, parse_command, unit_slugs, unit_state_key)
 from . import peakguard
 from . import packshare
 from . import pv as pv_read
@@ -901,9 +902,12 @@ class Controller:
         # turned them on behaves exactly as before (SAFETY-10 section 1). Each
         # battery's mode and on/off switch live in the store, not in options,
         # so a change applies at once (`pack_use`, `pack_mode` actions).
-        self.modes_on = opts.get("battery_modes_enabled") is True
+        self.modes_on = packmode.enabled(opts)
         # The units whose mode fault is logged already (edge-logged).
         self._mode_faults = set()
+        # OPT-11 P2: (topic, reason) of MQTT commands refused and logged once.
+        self._mqtt_refused = set()
+        self._mqtt_refused_more = 0
         # [(pack name, why)] for packs that are due and waiting their turn.
         # Empty at a roster of one, where nothing can defer anything.
         self._maint_deferred = []
@@ -2053,6 +2057,65 @@ class Controller:
         pm = self.pack_mode(inv)
         return {"unit": inv.name, "use": pm.use, "mode": pm.mode}
 
+    def mode_values(self) -> dict:
+        """OPT-11 P2: each battery's mode and switch, for their HA state
+        topics. Read from the store, so they are right after a restart. Empty
+        while battery modes are off."""
+        if not self.modes_on:
+            return {}
+        out = {}
+        names = [inv.name for inv in self.inverters]
+        for inv, slug in zip(self.inverters, unit_slugs(names)):
+            pm = self.pack_mode(inv)
+            out[unit_state_key(slug, "mode")] = MODE_LABELS.get(pm.mode,
+                                                               pm.mode)
+            out[unit_state_key(slug, "use")] = USE_ON if pm.use else USE_OFF
+        return out
+
+    async def mqtt_command(self, topic, payload, retained) -> None:
+        """OPT-11 P2: one command from a battery's HA switch or mode list.
+
+        It goes through handle_action(), the page's /action path, so the
+        checks and the store write are the same. A retained command (one the
+        broker replays on subscribe, e.g. after a restart) is never applied:
+        the store already holds the last choice. A refusal is logged once per
+        topic and reason, at most 32, and further refusals are counted in the
+        log at 1, 10, 100 and so on. Never raises: MQTT must not reach control.
+        """
+        try:
+            slug, action, value, why = parse_command(
+                topic, payload, retained, packmode.MODES)
+            if why is None:
+                names = [inv.name for inv in self.inverters]
+                unit = dict(zip(unit_slugs(names), names)).get(slug)
+                result = await self.handle_action(action, unit=unit,
+                                                  value=value)
+                if not (isinstance(result, dict) and "error" in result):
+                    self.mqtt.publish(self.mode_values())
+                    return
+                why = result["error"]
+            else:
+                why = messages.pack_refused(why)
+            # Printable only: a topic is sender-chosen, so no log injection.
+            topic_s = "".join(c if c.isprintable() else "?"
+                              for c in str(topic)[:128])
+            _LOG.debug("Home Assistant command %s %s refused: %s", topic_s,
+                       repr(payload)[:48], why)
+            if (topic_s, why) in self._mqtt_refused \
+                    or len(self._mqtt_refused) >= 32:
+                # Not logged again, but counted: 1, 10, 100... stay visible.
+                self._mqtt_refused_more += 1
+                more = self._mqtt_refused_more
+                if str(more).rstrip("0") == "1":
+                    _LOG.warning("Home Assistant commands still ignored: %d "
+                                 "more so far.", more)
+                return
+            self._mqtt_refused.add((topic_s, why))
+            _LOG.warning("Home Assistant command on %s ignored: %s", topic_s,
+                         why)
+        except Exception:                               # noqa: BLE001
+            _LOG.exception("Home Assistant command could not be handled")
+
     def _maint_stop_off(self, machine, now) -> None:
         """OPT-11: stop this battery's maintenance cycle because it is off."""
         if machine.phase == IDLE:
@@ -5144,6 +5207,8 @@ class Controller:
             values[unit_state_key(slug, "soc")] = inv.soc
             values[unit_state_key(slug, "sign_latch")] = (
                 "tripped" if inv.sign_wd.tripped else "clear")
+        # OPT-11 P2: each battery's mode and switch; nothing while modes are off.
+        values.update(self.mode_values())
         self.mqtt.publish(values)
 
     async def shutdown(self) -> None:
@@ -6059,6 +6124,21 @@ class ControlTaskDied(RuntimeError):
     """The control task ended while nothing had asked it to stop."""
 
 
+def mode_announcement(opts, store) -> tuple:
+    """OPT-11 P2: `(modes, retract)` for the MQTT publisher at start-up.
+
+    The config topics announced are kept in the store, so turning modes off
+    removes exactly those (`mqtt.mode_configs()`). An install that never
+    turned modes on gets nothing, and its store is not written.
+    """
+    modes = packmode.MODES if packmode.enabled(opts) else ()
+    stored = store.data.get(MODE_CONFIGS_KEY)
+    keep, retract = mode_configs(roster_names(opts), modes, stored)
+    if keep and keep != stored:
+        store.set(MODE_CONFIGS_KEY, keep)
+    return modes, retract
+
+
 def control_task_done(task: asyncio.Task, *, controller, stop: asyncio.Event,
                       died: list) -> None:
     """Done-callback on the control task: log its death now and wake amain()
@@ -6189,6 +6269,9 @@ async def amain() -> None:
         # took the control loop down with it.
         broker = None
         try:
+            # OPT-11 P2: each battery's switch and mode list, only while
+            # battery modes are on (`mode_announcement()`).
+            _modes, _retract = mode_announcement(opts, store)
             broker = await hass.mqtt_service()
             pub = MqttPublisher(
                 broker.get("host") if broker else None,
@@ -6208,6 +6291,8 @@ async def amain() -> None:
                 # is what `build_roster()` itself reads. At a roster of one this
                 # announces nothing new - see `announced_units()`.
                 units=roster_names(opts),
+                modes=_modes,
+                retract=_retract,
             )
         except Exception as err:  # noqa: BLE001
             _LOG.warning("MQTT unavailable (%s) - continuing without status entities", err)
@@ -6221,6 +6306,8 @@ async def amain() -> None:
 
         stop = asyncio.Event()
         controller = Controller(opts, hass, store, pub, stop=stop)
+        if callable(getattr(pub, "bind", None)):
+            pub.bind(asyncio.get_running_loop(), controller.mqtt_command)
         runner = await web.start(controller, port=INGRESS_PORT)
 
         loop = asyncio.get_running_loop()

goodwe_controller/app/messages.py

@@ -932,6 +932,11 @@ PACK_REFUSED = {
     "off": "Battery modes are off. Turn on “Battery modes” first.",
     "unit": "There is no battery with that name.",
     "value": "That choice is not possible for this battery.",
+    # OPT-11 P2: a Home Assistant command dropped before it reaches a battery.
+    "retained": "An old saved command is not used.",
+    "size": "That command is too long.",
+    "encoding": "That command is not plain text.",
+    "topic": "That is not a battery command.",
 }
 
 

goodwe_controller/app/mqtt.py

@@ -7,8 +7,10 @@ That separation is deliberate; observability must never be able to take down
 control.
 """
 
+import asyncio
 import json
 import logging
+import re
 
 try:
     import paho.mqtt.client as mqtt
@@ -375,7 +377,26 @@ def _payload(name, object_id, unique_id, state_topic, device,
     return cfg
 
 
-def discovery_payloads(units=(), omit=(), include=()) -> list:
+def unit_unique_id(slug: str, key: str) -> str:
+    """One unit's entity `unique_id` (also its config topic's middle part)."""
+    return f"{BASE}_unit_{slug}_{key}"
+
+
+def _unit_places(names):
+    """`(slug, device, prefix)` for each roster name, in order."""
+    slugs = unit_slugs(names)
+    for i, (name, slug) in enumerate(zip(names, slugs)):
+        # ⚠️ `i == 0` IS THE ASYMMETRY, IN ONE LINE. The first roster entry
+        # keeps the device it already has and carries its name in the ENTITY
+        # name instead; every later one gets its own device and does not.
+        # Either way HA composes device-name + entity-name into the same
+        # string, which is why `object_id` can be written once for both.
+        device = DEVICE if i == 0 else unit_device(name, slug)
+        prefix = f"{_title(name)} " if i == 0 else ""
+        yield slug, device, prefix
+
+
+def discovery_payloads(units=(), omit=(), include=(), modes=()) -> list:
     """Every `(topic, payload)` this add-on announces, in announcement order.
 
     Split out of `_announce()` so that the acceptance criterion can be graded as
@@ -389,6 +410,8 @@ def discovery_payloads(units=(), omit=(), include=()) -> list:
     the output here (`_payload()`'s note, and test_mqtt.py part 1 asserts an
     ordered LIST precisely because a re-order is a zero-byte edit that
     re-announces every entity on a live install).
+
+    `modes` (OPT-11 P2) is the battery modes offered, empty when they are off.
     """
     omit = set(omit)
     include = [k for k in include if k not in omit]
@@ -400,19 +423,10 @@ def discovery_payloads(units=(), omit=(), include=()) -> list:
             f"homeassistant/sensor/{BASE}_{key}/config",
             _payload(name, object_id, f"{BASE}_{key}", f"{BASE}/{key}",
                      DEVICE, unit, dev_class, state_class, icon)))
-    names = announced_units(units)
-    slugs = unit_slugs(names)
     site_slug = _slug(DEVICE["name"])
-    for i, (name, slug) in enumerate(zip(names, slugs)):
-        # ⚠️ `i == 0` IS THE ASYMMETRY, IN ONE LINE. The first roster entry
-        # keeps the device it already has and carries its name in the ENTITY
-        # name instead; every later one gets its own device and does not.
-        # Either way HA composes device-name + entity-name into the same
-        # string, which is why `object_id` below can be written once for both.
-        device = DEVICE if i == 0 else unit_device(name, slug)
-        prefix = f"{_title(name)} " if i == 0 else ""
+    for slug, device, prefix in _unit_places(announced_units(units)):
         for key, oid, label, unit, dev_class, state_class, icon in UNIT_SENSORS:
-            unique_id = f"{BASE}_unit_{slug}_{key}"
+            unique_id = unit_unique_id(slug, key)
             out.append((
                 f"homeassistant/sensor/{unique_id}/config",
                 _payload(prefix + label,
@@ -427,12 +441,134 @@ def discovery_payloads(units=(), omit=(), include=()) -> list:
             f"homeassistant/sensor/{BASE}_{key}/config",
             _payload(name, object_id, f"{BASE}_{key}", f"{BASE}/{key}",
                      DEVICE, unit, dev_class, state_class, icon)))
+    # OPT-11 P2: last, and only when battery modes are on.
+    out.extend(mode_payloads(units, modes))
     return out
 
 
+# --- OPT-11 P2: each battery's switch and mode, as HA entities ---------------
+# Announced only when battery modes are on, after every other row, so no
+# existing row moves. A command goes through Controller.handle_action(), the
+# page's /action path. DECISIONS/OPT-11-battery-modes.md has the record.
+#
+# The select's options are these labels, in `packmode.MODES` order. A new mode
+# (P3) is a new entry here and a new option at the end; no id changes.
+MODE_LABELS = {"solar_first": "Solar first", "leftover_solar": "Leftover solar"}
+USE_ON, USE_OFF = "ON", "OFF"
+# A longer command payload is refused before it is decoded.
+MAX_COMMAND_BYTES = 64
+# The store key holding the mode config topics last announced, so that turning
+# modes off can remove exactly those (an empty retained config) and an install
+# that never turned them on publishes nothing new.
+MODE_CONFIGS_KEY = "mqtt_mode_configs"
+_MODE_CONFIG_RE = re.compile(
+    rf"homeassistant/(select|switch)/{BASE}_unit_[a-z0-9_]+_(mode|use)/config")
+_COMMAND_RE = re.compile(rf"{BASE}/unit/([a-z0-9_]+)/(mode|use)/set")
+# (entity key, HA component, entity name, icon)
+MODE_ENTITIES = [
+    ("mode", "select", "Mode", "mdi:battery-sync"),
+    ("use", "switch", "Use", "mdi:power"),
+]
+
+
+def mode_payloads(units, modes) -> list:
+    """The `(topic, payload)` for each battery's select and switch.
+
+    Every roster entry gets them, also at a roster of one. The device rule is
+    TEL-07's: the first battery's rows go on the site device with its name in
+    front, each later battery's on its own device. Empty when `modes` is empty.
+    """
+    if not modes:
+        return []
+    site_slug = _slug(DEVICE["name"])
+    options = [MODE_LABELS[m] for m in modes]
+    out = []
+    for slug, device, prefix in _unit_places([str(u) for u in units]):
+        for key, component, label, icon in MODE_ENTITIES:
+            unique_id = unit_unique_id(slug, key)
+            state = f"{BASE}/{unit_state_key(slug, key)}"
+            cfg = {
+                "name": prefix + label,
+                "object_id": f"{site_slug}_{slug}_{key}",
+                "unique_id": unique_id,
+                "state_topic": state,
+                "command_topic": f"{state}/set",
+            }
+            if component == "select":
+                cfg["options"] = options
+            else:
+                cfg["payload_on"] = USE_ON
+                cfg["payload_off"] = USE_OFF
+            # HA sends commands unretained; a retained one is ignored anyway.
+            cfg["retain"] = False
+            cfg["availability_topic"] = AVAILABILITY
+            cfg["device"] = device
+            cfg["icon"] = icon
+            out.append((f"homeassistant/{component}/{unique_id}/config", cfg))
+    return out
+
+
+def mode_retractions(stored, current) -> list:
+    """Config topics announced before and not now: each gets an empty
+    retained config, which removes the entity from HA. Anything in the store
+    that is not one of our mode config topics is ignored."""
+    if not isinstance(stored, list):
+        return []
+    keep = set(current)
+    return list(dict.fromkeys(t for t in stored if isinstance(t, str)
+                              and _MODE_CONFIG_RE.fullmatch(t)
+                              and t not in keep))
+
+
+def mode_configs(units, modes, stored) -> tuple:
+    """`(keep, retract)` at start-up: the mode config topics to store, and the
+    ones to remove now. A removal stays in `keep`, so a start with no broker
+    does not forget it; resending an empty config is harmless."""
+    current = [t for t, _ in mode_payloads(units, modes)]
+    retract = mode_retractions(stored, current)
+    return current + retract, retract
+
+
+def parse_command(topic, payload, retained, modes):
+    """`(slug, action, value, reject)` for one message on a command topic.
+
+    `action` is `pack_use` or `pack_mode`. `value` is what /action would be
+    sent: a bool for the switch, a mode key for the select, or None for a
+    payload that is neither (the store path then refuses it). `reject` is a
+    reason when the message is dropped here: replayed by the broker (retained),
+    too long, not UTF-8, or not a command topic.
+    """
+    m = _COMMAND_RE.fullmatch(topic) if isinstance(topic, str) else None
+    if m is None:
+        return None, None, None, "topic"
+    slug, key = m.group(1), m.group(2)
+    action = "pack_use" if key == "use" else "pack_mode"
+    if retained:
+        return slug, action, None, "retained"
+    if not isinstance(payload, (bytes, bytearray)) \
+            or len(payload) > MAX_COMMAND_BYTES:
+        return slug, action, None, "size"
+    try:
+        text = bytes(payload).decode("utf-8")
+    except UnicodeDecodeError:
+        return slug, action, None, "encoding"
+    if key == "use":
+        value = {USE_ON: True, USE_OFF: False}.get(text)
+    else:
+        value = next((k for k in modes if MODE_LABELS.get(k) == text), None)
+    return slug, action, value, None
+
+
 class MqttPublisher:
+    # OPT-11 P2. Class defaults, so a publisher built without them (and every
+    # test fixture that builds one with __new__) behaves as before.
+    modes = ()
+    retract = ()
+    _loop = None
+    _handler = None
+
     def __init__(self, host, port, username=None, password=None, omit=(),
-                 units=(), include=()):
+                 units=(), include=(), modes=(), retract=()):
         # `omit` drops sensor keys from discovery entirely. ⚠️ Announcing a
         # sensor that nothing will ever publish to is not harmless here:
         # p1_sample_age_s is a watchdog input, and an entity that exists but is
@@ -448,6 +584,10 @@ class MqttPublisher:
         # second reading of the option. Defaults to empty, so a caller that has
         # not been taught about it announces exactly what it announced before.
         self.include = [str(k) for k in include]
+        # OPT-11 P2: the modes offered (empty when battery modes are off), and
+        # the mode config topics to remove (`mode_retractions()`).
+        self.modes = tuple(modes)
+        self.retract = [str(t) for t in retract]
         self.enabled = mqtt is not None and bool(host)
         self.client = None
         if not self.enabled:
@@ -470,7 +610,8 @@ class MqttPublisher:
         # paho DROPS QoS-0 publishes when disconnected, silently. The result is
         # an add-on that logs "MQTT connected" and creates no entities at all.
         # As a bonus, this also re-announces after every reconnect.
-        self.client.on_connect = lambda *_args, **_kw: self._announce()
+        self.client.on_connect = lambda *_args, **_kw: self._on_connect()
+        self.client.on_message = self._on_message
         try:
             self.client.connect(host, int(port), keepalive=60)
             self.client.loop_start()
@@ -485,10 +626,35 @@ class MqttPublisher:
         # diffing what actually goes on the wire - and a payload built here
         # instead would be one this add-on publishes and no check has ever seen.
         for topic, cfg in discovery_payloads(self.units, self.omit,
-                                             self.include):
+                                             self.include, self.modes):
             self.client.publish(topic, json.dumps(cfg), retain=True)
+        for topic in self.retract:
+            self.client.publish(topic, "", retain=True)
         self.client.publish(AVAILABILITY, "online", retain=True)
 
+    def _on_connect(self) -> None:
+        self._announce()
+        if self.modes:
+            for key in ("mode", "use"):
+                self.client.subscribe(f"{BASE}/unit/+/{key}/set")
+
+    def bind(self, loop, handler) -> None:
+        """OPT-11 P2: hand each command to `handler(topic, payload, retained)`,
+        a coroutine function run on `loop` (the controller's)."""
+        self._loop, self._handler = loop, handler
+
+    def _on_message(self, _client, _userdata, msg) -> None:
+        # paho's network thread: nothing is done here but the handoff.
+        loop, handler = self._loop, self._handler
+        if loop is None or handler is None:
+            _LOG.debug("MQTT command before start-up ignored: %s", msg.topic)
+            return
+        try:
+            asyncio.run_coroutine_threadsafe(
+                handler(msg.topic, bytes(msg.payload), bool(msg.retain)), loop)
+        except RuntimeError as err:  # the loop has closed
+            _LOG.debug("MQTT command dropped: %s", err)
+
     def publish(self, values: dict) -> None:
         if not self.enabled or self.client is None:
             return

goodwe_controller/app/packmode.py

@@ -42,6 +42,12 @@ MODE_KEY = "pack_mode"
 SELL_KEY = "pack_sell"              # reserved for P3
 
 
+def enabled(opts) -> bool:
+    """Battery modes are on only when the option is exactly true. One answer,
+    read by the controller and by the MQTT announcement."""
+    return opts.get("battery_modes_enabled") is True
+
+
 @dataclass(frozen=True)
 class PackMode:
     """One battery's choice: on or off, its mode, and (P3) selling."""

goodwe_controller/test_messages.py

@@ -845,7 +845,8 @@ DATA = {
     "main.py:'cancelled' if task.cancelled() else repr(exc) if exc else 'returned'",
     "main.py:EXIT_CONTROL_DIED", "main.py:first.name", "main.py:OPTIONS_PATH",
     "main.py:err", "main.py:', '.join(sorted(stranded))",
-    "main.py:sorted(on_roster)", "main.py:inv.name",
+    "main.py:sorted(on_roster)", "main.py:inv.name", "main.py:topic_s",
+    "main.py:more",
     "main.py:inv.batt_fresh.bound.release_s", "main.py:inv.batt_fresh.bound.move_w",
     "main.py:inv.batt_fresh.bound.unchanged_s", "main.py:inv.batt_fresh.held",
     "main.py:value", "main.py:float(value)",
@@ -1058,6 +1059,8 @@ TEXT = {
     "main.py:rep.explain()": _migration_texts,
     "store.py:rep.explain()": _migration_texts,
     "main.py:plan.words": _tariff_texts,
+    # OPT-11 P2: why an MQTT command was ignored.
+    "main.py:why": lambda: list(messages.PACK_REFUSED.values()),
     # Families: every builder of the text, as a template.
     "main.py:refusal": lambda: (_static(("main.py", "return", "write_refusal"))
                                 + _static(("allocator.py", "return", "authorises"))),

goodwe_controller/test_mqtt.py

@@ -42,6 +42,7 @@ part is a diff against it, reported as `N topics, M missing, C changed, A added`
           re-executed from mutated source, each one named with the property it
           breaks. A property nothing breaks is a property nothing is watching.
   Part 9  What these checks CANNOT see, enumerated and sized.
+  Part 10 OPT-11 P2: each battery's select and switch, commands, removal.
 
 ⚠️ THE FIXTURE GIVES A AND B DIFFERENT NAMES, DIFFERENT RATINGS, DIFFERENT SoC,
 DIFFERENT BATTERY POWER AND DIFFERENT LATCH STATES, ON PURPOSE. A fixture whose
@@ -821,8 +822,8 @@ MUTATIONS = [
     ("per-unit entities announced at a roster of ONE",
      [("PER_UNIT_MIN_ROSTER = 2", "PER_UNIT_MIN_ROSTER = 1")]),
     ("the unit is dropped from the unique_id",
-     [('unique_id = f"{BASE}_unit_{slug}_{key}"',
-       'unique_id = f"{BASE}_unit_{key}"')]),
+     [('return f"{BASE}_unit_{slug}_{key}"',
+       'return f"{BASE}_unit_{key}"')]),
     ("the unit is dropped from the state topic",
      [('return f"unit/{slug}/{key}"', 'return f"unit/{key}"')]),
     ("the slug de-collision is removed (rule 9(c) does not cover this)",
@@ -944,6 +945,536 @@ for line in [
 ]:
     print("    " + line)
 
+# ---------------------------------------------------------------------------
+print("\n10. OPT-11 P2: each battery's switch and mode as HA entities")
+# ---------------------------------------------------------------------------
+import logging     # noqa: E402
+import os          # noqa: E402
+import tempfile    # noqa: E402
+
+from app import messages, packmode    # noqa: E402
+from app.store import Store, unit_key  # noqa: E402
+
+
+def announce_p2(units=(), omit=(), include=(), modes=(), retract=(),
+                module=mqtt):
+    """What `_on_connect()` sends: the announcement, then any subscriptions."""
+    pub = module.MqttPublisher.__new__(module.MqttPublisher)
+    pub.omit, pub.units, pub.include = set(omit), [str(u) for u in units], \
+        [str(k) for k in include]
+    pub.modes, pub.retract = tuple(modes), list(retract)
+    pub.enabled, pub.client = True, FakeClient()
+    subs = []
+    pub.client.subscribe = lambda topic, *a: subs.append(topic)
+    pub._on_connect()
+    return pub.client.msgs, subs
+
+
+# --- 10a. modes off: byte-identical to ed739d4 --------------------------------
+# The digest below is GENERATED from release/1.0 at ed739d4 (the base of this
+# PR): the same matrix run through that commit's `_announce()`. Reproduce with
+# `git show ed739d4:goodwe_controller/app/mqtt.py` and this loop.
+ROSTERS = [[], ["inverter-a"], ["inverter-a", "inverter-b"], ["a", "b", "c"],
+           ["inverter-b", "Inverter B", "x", "y"], ["café"]]
+ED739D4_OFF = "501a7d93782a260b"
+_h, _n, _subs_off = hashlib.sha256(), 0, []
+for _r in ROSTERS:
+    for _om in [(), ("p1_age",), ("p1_age", "grid")]:
+        for _inc in [(), ("pv",)]:
+            _m, _s = announce_p2(_r, _om, _inc)
+            _h.update(repr(_m).encode())
+            _subs_off += _s
+            _n += 1
+print(f"    modes off, {_n} configurations: digest {_h.hexdigest()[:16]} "
+      f"(ed739d4: {ED739D4_OFF})")
+check("modes off: every configuration announces byte-for-byte what ed739d4 "
+      "announces, in the same order, and subscribes to nothing",
+      _h.hexdigest()[:16] == ED739D4_OFF and not _subs_off)
+
+
+# --- 10b. modes on: the ordered payload diff ----------------------------------
+MODES = packmode.MODES
+ON1, SUB1 = announce_p2(["inverter-a"], modes=MODES)
+m, c, a = report("roster of one, modes on", ON1)
+_opt = '["Solar first", "Leftover solar"]'
+MODE_N1 = [
+    ("homeassistant/select/goodwe_ctl_unit_inverter_a_mode/config",
+     '{"name": "Inverter A Mode", "object_id": "goodwe_inverter_a_mode", '
+     '"unique_id": "goodwe_ctl_unit_inverter_a_mode", '
+     '"state_topic": "goodwe_ctl/unit/inverter_a/mode", '
+     '"command_topic": "goodwe_ctl/unit/inverter_a/mode/set", '
+     '"options": ' + _opt + ', "retain": false, '
+     '"availability_topic": "goodwe_ctl/availability", "device": ' + _DEV + ', '
+     '"icon": "mdi:battery-sync"}', True),
+    ("homeassistant/switch/goodwe_ctl_unit_inverter_a_use/config",
+     '{"name": "Inverter A Use", "object_id": "goodwe_inverter_a_use", '
+     '"unique_id": "goodwe_ctl_unit_inverter_a_use", '
+     '"state_topic": "goodwe_ctl/unit/inverter_a/use", '
+     '"command_topic": "goodwe_ctl/unit/inverter_a/use/set", '
+     '"payload_on": "ON", "payload_off": "OFF", "retain": false, '
+     '"availability_topic": "goodwe_ctl/availability", "device": ' + _DEV + ', '
+     '"icon": "mdi:power"}', True),
+]
+check("modes on at a roster of one: every existing message byte-identical and "
+      "in place, then exactly the select and the switch, then availability",
+      ON1 == SITE_NOW[:-1] + MODE_N1 + SITE_NOW[-1:])
+check("...and it subscribes to the two command topics, and nothing else",
+      SUB1 == ["goodwe_ctl/unit/+/mode/set", "goodwe_ctl/unit/+/use/set"])
+
+ON2, _ = announce_p2(NAMES2, modes=MODES)
+m, c, a = report("roster of two, modes on", ON2, TWO)
+check("modes on at a roster of two: nothing missing or changed, four added, "
+      "and the modes-off list is an unchanged prefix",
+      (m, c) == ([], []) and len(a) == 4 and ON2[:len(TWO) - 1] == TWO[:-1]
+      and ON2[-1] == TWO[-1])
+_mc = cfgs(ON2)[-4:]
+check("...A's two stay on the site device with its name in front; B's two are "
+      "on B's own device, as TEL-07's rule has it",
+      [c_["name"] for c_ in _mc] == ["Inverter A Mode", "Inverter A Use",
+                                      "Mode", "Use"]
+      and _mc[0]["device"] == mqtt.DEVICE == _mc[1]["device"]
+      and _mc[2]["device"] == _mc[3]["device"]
+      == mqtt.unit_device("inverter-b", "inverter_b"))
+check("...unique_ids are stable per battery and distinct from every other id",
+      [c_["unique_id"] for c_ in _mc]
+      == ["goodwe_ctl_unit_inverter_a_mode", "goodwe_ctl_unit_inverter_a_use",
+          "goodwe_ctl_unit_inverter_b_mode", "goodwe_ctl_unit_inverter_b_use"]
+      and len({c_["unique_id"] for c_ in cfgs(ON2)}) == len(cfgs(ON2)))
+_ids = [compose(c_["device"]["name"], c_["name"]).split(".", 1)[1]
+        for c_ in _mc]
+print(f"    composed ids: {_ids}")
+check("...and HA composes the ids the design names: "
+      "goodwe_inverter_<x>_mode and goodwe_inverter_<x>_use",
+      _ids == ["goodwe_inverter_a_mode", "goodwe_inverter_a_use",
+               "goodwe_inverter_b_mode", "goodwe_inverter_b_use"])
+check("every mode has a plain label, in MODES order, and a later mode only "
+      "appends an option: no existing option or id changes",
+      all(k in mqtt.MODE_LABELS for k in MODES)
+      and len(set(mqtt.MODE_LABELS.values())) == len(mqtt.MODE_LABELS)
+      and json.loads(MODE_N1[0][1])["options"]
+      == [mqtt.MODE_LABELS[k] for k in MODES])
+# Review of #152: the HA options are what automations send, so they are kept
+# apart from the page's words on purpose. They start equal; if the page's
+# English changes, this goes red and the author decides: keep the HA option
+# (and change this pin) or rename it (a breaking change, in DECISIONS).
+_en = json.loads((HERE / "app" / "ui_text" / "en.json").read_text())
+check("each HA mode option is the page's English name for that mode, in "
+      "both places the page names it",
+      all(mqtt.MODE_LABELS[k] == _en["home_words"]["modes"][k]
+          == _en["home"]["batteries"]["choice"][k]["name"] for k in MODES))
+_later = dict(mqtt.MODE_LABELS, cheap_hours="Cheap hours only")
+_orig = mqtt.MODE_LABELS
+mqtt.MODE_LABELS = _later
+try:
+    _p3 = mqtt.mode_payloads(NAMES2, MODES + ("cheap_hours",))
+finally:
+    mqtt.MODE_LABELS = _orig
+_p2 = mqtt.mode_payloads(NAMES2, MODES)
+check("...(simulated P3: adding `cheap_hours` changes only the options list, "
+      "by one entry at its end)",
+      [t for t, _ in _p3] == [t for t, _ in _p2]
+      and all({k: v for k, v in x.items() if k != "options"}
+              == {k: v for k, v in y.items() if k != "options"}
+              for (_, x), (_, y) in zip(_p3, _p2))
+      and _p3[0][1]["options"] == _p2[0][1]["options"] + ["Cheap hours only"])
+
+
+# --- 10c. modes turned off: removal ------------------------------------------
+_cur2 = [t for t, _ in mqtt.mode_payloads(NAMES2, MODES)]
+_ret = mqtt.mode_retractions(_cur2, [])
+OFF2, _subs = announce_p2(NAMES2, retract=_ret)
+check("modes turned off: the modes-off list, then an EMPTY retained config "
+      "for each of the four, then availability, and no subscription",
+      OFF2 == TWO[:-1] + [(t, "", True) for t in _cur2] + TWO[-1:]
+      and not _subs)
+check("...the store keeps what was announced, so a roster that shrinks removes "
+      "only the battery that left",
+      mqtt.mode_retractions(_cur2, [t for t, _ in
+                                    mqtt.mode_payloads(["inverter-a"], MODES)])
+      == _cur2[2:])
+check("...and nothing from the store is removed that is not one of our mode "
+      "configs: a non-list, a number, a site sensor, another add-on's select",
+      mqtt.mode_retractions("homeassistant/select/x/config", []) == []
+      and mqtt.mode_retractions(
+          [3, None, "homeassistant/sensor/goodwe_ctl_grid/config",
+           "homeassistant/select/other_mode/config",
+           "homeassistant/select/goodwe_ctl_unit_a_mode/config/x",
+           "homeassistant/select/goodwe_ctl_unit_a_mode/config"], [])
+      == ["homeassistant/select/goodwe_ctl_unit_a_mode/config"])
+
+
+_on1 = [t for t, _ in mqtt.mode_payloads(["inverter-a"], MODES)]
+_k, _r = mqtt.mode_configs(["inverter-a"], MODES, _cur2)
+check("start-up (`mode_configs`): a battery that left is removed, and stays "
+      "in the store, so a start with no broker does not forget it",
+      _r == _cur2[2:] and _k == _on1 + _cur2[2:])
+_k, _r = mqtt.mode_configs(NAMES2, (), _cur2 + _cur2[:1])
+check("...modes turned off: all four are removed, once each, and kept",
+      _r == _cur2 and _k == _cur2)
+check("...never turned on: nothing to store and nothing to remove, so the "
+      "store is not written",
+      mqtt.mode_configs(NAMES2, (), None) == ([], []))
+_k, _r = mqtt.mode_configs(NAMES2, MODES, _cur2)
+check("...turned on again: nothing removed, and the list does not grow",
+      _r == [] and _k == _cur2)
+
+
+from app.main import mode_announcement  # noqa: E402
+_st = Store(os.path.join(tempfile.mkdtemp(), "ann.json"))
+_OPTS1M = dict(OPTS2, battery_modes_enabled=True,
+               inverters=OPTS2["inverters"][:1])
+_seen = [mode_announcement(dict(OPTS2), _st),
+         dict(_st.data)]
+_seen += [mode_announcement(dict(OPTS2, battery_modes_enabled=True), _st),
+          list(_st.data.get(mqtt.MODE_CONFIGS_KEY) or [])]
+_seen += [mode_announcement(_OPTS1M, _st),
+          list(_st.data.get(mqtt.MODE_CONFIGS_KEY) or [])]
+_seen += [mode_announcement(dict(OPTS2, battery_modes_enabled=False), _st),
+          list(_st.data.get(mqtt.MODE_CONFIGS_KEY) or [])]
+check("main's start-up, through a real Store: never on announces and stores "
+      "nothing; on stores the four; a roster of one removes B's two and keeps "
+      "them; off removes all four and the store keeps them",
+      _seen[0] == ((), []) and mqtt.MODE_CONFIGS_KEY not in _seen[1]
+      and _seen[2] == (MODES, []) and _seen[3] == _cur2
+      and _seen[4] == (MODES, _cur2[2:]) and sorted(_seen[5]) == sorted(_cur2)
+      and _seen[6] == ((), _seen[5])
+      and sorted(_seen[7]) == sorted(_cur2))
+_st = Store(os.path.join(tempfile.mkdtemp(), "ren.json"))
+mode_announcement(dict(OPTS2, battery_modes_enabled=True), _st)
+_ren = dict(OPTS2, battery_modes_enabled=True, inverters=[
+    OPTS2["inverters"][0], dict(OPTS2["inverters"][1], name="inverter-c")])
+_r = mode_announcement(_ren, _st)[1]
+_kept = list(_st.data.get(mqtt.MODE_CONFIGS_KEY) or [])
+check("...B renamed C while on: B's two are removed and stay stored beside "
+      "A's and C's, so a start with no broker does not forget them",
+      _r == _cur2[2:] and _kept[-2:] == _cur2[2:] and len(_kept) == 6
+      and mode_announcement(_ren, _st)[1] == _cur2[2:])
+check("battery modes are on only for exactly `true`: not \"true\", 1 or "
+      "\"false\"",
+      [packmode.enabled({"battery_modes_enabled": v})
+       for v in (True, "true", 1, "false", None)]
+      == [True, False, False, False, False])
+
+
+# --- 10d. state topics, from the store ----------------------------------------
+_tmp = tempfile.mkdtemp()
+OPTS2M = dict(OPTS2, battery_modes_enabled=True)
+
+
+def ctl_for(opts, path):
+    pub = _Pub()
+    pub.sent = []
+    pub.publish = lambda values, _p=pub: (_p.sent.append(dict(values)),
+                                          setattr(_p, "last", dict(values)))
+    return Controller(dict(opts), None, Store(path), pub,
+                      stop=asyncio.Event()), pub
+
+
+_path = os.path.join(_tmp, "state.json")
+ctlm, pubm = ctl_for(OPTS2M, _path)
+ctlm.publish()
+_fed = {f"{mqtt.BASE}/{k}" for k in pubm.last
+        if k.endswith("/mode") or k.endswith("/use")}
+check("every announced mode entity is fed, and nothing else is: the state "
+      "topics published are exactly the ones announced",
+      _fed == {c_["state_topic"] for c_ in _mc})
+check("...defaults with nothing in the store: both On, both Solar first",
+      [pubm.last[k] for k in ("unit/inverter_a/mode", "unit/inverter_a/use",
+                              "unit/inverter_b/mode", "unit/inverter_b/use")]
+      == ["Solar first", "ON", "Solar first", "ON"])
+_c_off, _p_off = ctl_for(dict(OPTS2, battery_modes_enabled=False),
+                         os.path.join(_tmp, "off2.json"))
+_c_off.publish()
+_c_abs, _p_abs = ctl_for(OPTS2, os.path.join(_tmp, "off3.json"))
+_c_abs.publish()
+check("modes off (false or absent): the controller publishes the same keys as "
+      "before, with no mode or switch topic",
+      set(_p_off.last) == set(_p_abs.last) == set(vals2)
+      and not [k for k in _p_off.last if k.endswith(("/mode", "/use"))])
+
+
+# --- 10e. commands: the /action path, validated -------------------------------
+class _Logs(logging.Handler):
+    def __init__(self):
+        super().__init__(logging.DEBUG)
+        self.rows = []
+
+    def emit(self, record):
+        self.rows.append((record.levelno, record.getMessage()))
+
+
+_logs = _Logs()
+logging.getLogger("goodwe").addHandler(_logs)
+logging.getLogger("goodwe").setLevel(logging.DEBUG)
+_calls = []
+_real_handle = ctlm.handle_action
+
+
+async def _spy(what, **kw):
+    _calls.append((what, kw))
+    return await _real_handle(what, **kw)
+
+
+ctlm.handle_action = _spy
+
+
+def cmd(topic, payload, retained=False, ctl=None):
+    ctl = ctl or ctlm
+    asyncio.run(ctl.mqtt_command(topic, payload, retained))
+
+
+def stored(ctl=None):
+    d = (ctl or ctlm).store.data
+    return {k: d.get(k) for k in (unit_key("inverter-a", "pack_use"),
+                                  unit_key("inverter-a", "pack_mode"),
+                                  unit_key("inverter-b", "pack_use"),
+                                  unit_key("inverter-b", "pack_mode"))}
+
+
+T_A = "goodwe_ctl/unit/inverter_a"
+T_B = "goodwe_ctl/unit/inverter_b"
+pubm.sent.clear()
+cmd(f"{T_B}/use/set", b"OFF")
+cmd(f"{T_A}/mode/set", b"Leftover solar")
+check("good commands go through handle_action() with the /action arguments",
+      _calls == [("pack_use", {"unit": "inverter-b", "value": False}),
+                 ("pack_mode", {"unit": "inverter-a",
+                                "value": "leftover_solar"})])
+check("...and reach the store under P1's keys, and nowhere else",
+      stored() == {unit_key("inverter-a", "pack_use"): None,
+                   unit_key("inverter-a", "pack_mode"): "leftover_solar",
+                   unit_key("inverter-b", "pack_use"): False,
+                   unit_key("inverter-b", "pack_mode"): None})
+check("...and the state topics say so at once, from the store",
+      pubm.sent and pubm.sent[-1] == {
+          "unit/inverter_a/mode": "Leftover solar", "unit/inverter_a/use": "ON",
+          "unit/inverter_b/mode": "Solar first", "unit/inverter_b/use": "OFF"})
+check("...and the action log records each change",
+      any("inverter-b switched off" in e for e in ctlm.events)
+      and any("inverter-a mode set to leftover solar" in e
+              for e in ctlm.events))
+
+_before = stored()
+_n_calls = len(_calls)
+BAD = [
+    (f"{T_A}/use/set", b"on"), (f"{T_A}/use/set", b"ON\n"),
+    (f"{T_A}/use/set", b"true"), (f"{T_A}/use/set", b"1"),
+    (f"{T_A}/use/set", b""),
+    (f"{T_A}/mode/set", b"solar_first"),          # a key, not the option
+    (f"{T_A}/mode/set", b"Cheap hours only"),     # not offered before P3
+    (f"{T_A}/mode/set", b"solar first"),
+    (f"{T_A}/mode/set", "Sοlar first".encode()),  # Greek omicron
+    (f"{T_A}/mode/set", b"Solar first\x00"),
+    (f"{T_A}/mode/set", b'{"action": "pack_use", "value": false}'),
+    (f"{T_A}/mode/set", b"Solar first; rm -rf /"),
+    (f"{T_A}/mode/set", b"' OR 1=1 --"),
+    (f"{T_A}/use/set", b"\xff\xfe"),              # not UTF-8
+    (f"{T_A}/mode/set", b"Solar first" * 10),     # too long
+    ("goodwe_ctl/unit/inverter_z/use/set", b"OFF"),   # no such battery
+    ("goodwe_ctl/unit/../use/set", b"OFF"),
+    ("goodwe_ctl/unit/inverter_a/soc/set", b"OFF"),
+    ("goodwe_ctl/unit/inverter_a/use/set/x", b"OFF"),
+    ("goodwe_ctl/unit/Inverter_A/use/set", b"OFF"),
+    (f"{T_A}/use/set", None),
+]
+for _t, _p in BAD:
+    cmd(_t, _p)
+check(f"all {len(BAD)} bad commands are refused: the store is unchanged",
+      stored() == _before)
+_passed = [c_ for c_ in _calls[_n_calls:]]
+check("...those that reach handle_action() carry a value /action also refuses "
+      "(None) or no known battery; nothing is coerced into a valid choice",
+      all(kw["value"] is None or kw["unit"] is None for _, kw in _passed))
+
+# Log once per topic and reason.
+_logs.rows.clear()
+for _ in range(5):
+    cmd(f"{T_B}/use/set", b"maybe")
+_warn = [r for r in _logs.rows if r[0] >= logging.WARNING]
+check("a refused command repeated 5 times is logged once at WARNING, in plain "
+      "words, and at DEBUG the other times",
+      len(_warn) == 1 and messages.pack_refused("value") in _warn[0][1]
+      and len([r for r in _logs.rows if r[0] == logging.DEBUG]) == 5)
+_logs.rows.clear()
+_flood, _ = ctl_for(OPTS2M, os.path.join(_tmp, "flood.json"))
+for _i in range(100):
+    cmd(f"goodwe_ctl/unit/x{_i}/use/set", b"OFF", ctl=_flood)
+_w = [r[1] for r in _logs.rows if r[0] >= logging.WARNING]
+_per = [w for w in _w if "still ignored" not in w]
+_more = [w for w in _w if "still ignored" in w]
+print(f"    flood: {len(_per)} per-topic WARNINGs, then {_more}")
+check("...and a flood of 100 different bad topics logs 32 WARNINGs, then the "
+      "rest only as a count, at 1 and 10 more (review of #152)",
+      len(_per) == 32 and len(_more) == 2
+      and "1 more so far" in _more[0] and "10 more so far" in _more[1])
+_logs.rows.clear()
+for _ in range(100):
+    cmd(f"{T_B}/use/set", b"maybe", ctl=_flood)
+_more = [r[1] for r in _logs.rows
+         if r[0] >= logging.WARNING and "still ignored" in r[1]]
+check("...so a repeated attack on ONE topic still shows it goes on: the count "
+      "reaches 100 in 3 lines, not 100",
+      len(_more) == 1 and "100 more so far" in _more[0])
+_logs.rows.clear()
+_inj, _ = ctl_for(OPTS2M, os.path.join(_tmp, "inj.json"))
+cmd("goodwe_ctl/unit/a\nERROR forged line\x1b[31m/use/set", b"OFF", ctl=_inj)
+_w = [r[1] for r in _logs.rows if r[0] >= logging.WARNING]
+check("...and a topic with a newline or an escape code cannot forge a log "
+      "line: it is logged printable only",
+      len(_w) == 1 and "\n" not in _w[0] and "\x1b" not in _w[0]
+      and "a?ERROR forged line?[31m" in _w[0])
+
+# Modes off: refused on the same path, even if a message arrives.
+cmd(f"{T_A}/use/set", b"OFF", ctl=_c_off)
+check("with modes off a command is refused by the same check /action makes",
+      stored(_c_off)[unit_key("inverter-a", "pack_use")] is None)
+
+
+# --- 10f. a retained command after a restart ----------------------------------
+_logs.rows.clear()
+_before = stored()
+_n_calls = len(_calls)
+cmd(f"{T_A}/use/set", b"OFF", retained=True)
+cmd(f"{T_B}/use/set", b"ON", retained=True)
+check("a RETAINED command (the broker replays it on subscribe, e.g. after a "
+      "restart) is never applied, and never reaches handle_action()",
+      stored() == _before and len(_calls) == _n_calls)
+check("...and it is logged once, in plain words",
+      any(messages.pack_refused("retained") in r[1]
+          for r in _logs.rows if r[0] >= logging.WARNING))
+ctl_r, pub_r = ctl_for(OPTS2M, _path)      # a restart: same state file
+ctl_r.publish()
+check("after a restart the state topics come from the store: A Leftover solar "
+      "and on, B off",
+      [pub_r.last[k] for k in ("unit/inverter_a/mode", "unit/inverter_a/use",
+                               "unit/inverter_b/use")]
+      == ["Leftover solar", "ON", "OFF"])
+logging.getLogger("goodwe").removeHandler(_logs)
+
+
+# --- 10g. the paho side ----------------------------------------------------------
+class _Msg:
+    def __init__(self, topic, payload, retain):
+        self.topic, self.payload, self.retain = topic, payload, retain
+
+
+_got = []
+
+
+async def _handler(*args):
+    _got.append(args)
+
+
+async def _drive():
+    pub = mqtt.MqttPublisher.__new__(mqtt.MqttPublisher)
+    pub._on_message(None, None, _Msg("t", b"x", 0))      # not bound: dropped
+    pub.bind(asyncio.get_running_loop(), _handler)
+    pub._on_message(None, None, _Msg(f"{T_A}/use/set", b"OFF", 1))
+    await asyncio.sleep(0.05)
+
+asyncio.run(_drive())
+check("paho's thread hands (topic, bytes, retained) to the controller's loop, "
+      "and drops a message that arrives before the controller exists",
+      _got == [(f"{T_A}/use/set", b"OFF", True)])
+
+_kws = {k.arg: ast.unparse(k.value) for c_ in _call for k in c_.keywords}
+_main_src = (HERE / "app" / "main.py").read_text()
+check("(source read) main() passes modes and retractions to the publisher, "
+      "and binds its commands to the controller",
+      _kws.get("modes") == "_modes" and _kws.get("retract") == "_retract"
+      and "pub.bind(asyncio.get_running_loop(), controller.mqtt_command)"
+      in _main_src
+      and "_modes, _retract = mode_announcement(opts, store)" in _main_src)
+
+
+# --- 10h. the guards, broken one at a time --------------------------------------
+def p2_properties(mod):
+    out = {}
+    try:
+        off, s_off = announce_p2(NAMES2, module=mod)
+        on1, s_on = announce_p2(["inverter-a"], modes=MODES, module=mod)
+        on2, _ = announce_p2(NAMES2, modes=MODES, module=mod)
+        out["off identical"] = off == TWO and not s_off
+        out["on payloads"] = on1 == ON1 and on2 == ON2
+        out["subscribes when on"] = s_on == SUB1
+        cur = [t for t, _ in mod.mode_payloads(NAMES2, MODES)]
+        out["retract filters store"] = mod.mode_retractions(
+            [3, "homeassistant/sensor/goodwe_ctl_grid/config",
+             "homeassistant/select/other/config"] + cur, cur) == []
+        out["retract keeps current"] = mod.mode_retractions(cur, cur) == []
+        out["retract published"] = announce_p2(
+            NAMES2, retract=cur[:1], module=mod)[0] == \
+            TWO[:-1] + [(cur[0], "", True)] + TWO[-1:]
+        pc = mod.parse_command
+        out["retained dropped"] = pc(f"{T_A}/use/set", b"OFF", True,
+                                     MODES)[3] == "retained"
+        out["size capped"] = pc(f"{T_A}/mode/set", b"Solar first" * 10,
+                                False, MODES)[3] == "size"
+        out["utf-8 only"] = pc(f"{T_A}/use/set", b"\xff", False,
+                               MODES)[3] == "encoding"
+        out["switch exact"] = (
+            pc(f"{T_A}/use/set", b"on", False, MODES)[2] is None
+            and pc(f"{T_A}/use/set", b"OFF", False, MODES)[2] is False)
+        out["select labels only"] = (
+            pc(f"{T_A}/mode/set", b"solar_first", False, MODES)[2] is None
+            and pc(f"{T_A}/mode/set", b"Leftover solar", False,
+                   MODES)[2] == "leftover_solar")
+        out["select offered only"] = pc(
+            f"{T_A}/mode/set", b"Solar first", False, ("leftover_solar",))[2] \
+            is None
+        out["topic exact"] = all(
+            pc(t, b"OFF", False, MODES)[3] == "topic"
+            for t in ("goodwe_ctl/unit/../use/set", "goodwe_ctl/unit/a/b/use/set",
+                      "goodwe_ctl/unit/a/use/set/x", "x/goodwe_ctl/unit/a/use/set"))
+    except Exception as err:  # noqa: BLE001
+        out["did not raise"] = False
+        out["__error__"] = repr(err)[:70]
+    return out
+
+
+P2_SHIPPED = p2_properties(mqtt)
+check("the shipped module has every P2 property (so a red below is the "
+      "mutation)", all(v is True for v in P2_SHIPPED.values()))
+P2_MUTATIONS = [
+    ("mode entities announced with modes off",
+     [("    if not modes:\n        return []\n", "    modes = modes or ('solar_first', 'leftover_solar')\n")]),
+    ("subscribed with modes off", [("        if self.modes:\n", "        if True:\n")]),
+    ("retained commands applied", [("    if retained:\n", "    if False:\n")]),
+    ("no payload size cap", [("or len(payload) > MAX_COMMAND_BYTES", "or False")]),
+    ("bad UTF-8 replaced, not refused",
+     [('.decode("utf-8")', '.decode("utf-8", "replace")')]),
+    ("switch payload case-folded",
+     [("{USE_ON: True, USE_OFF: False}.get(text)",
+       "{USE_ON: True, USE_OFF: False}.get(text.upper())")]),
+    ("select accepts mode keys too",
+     [("if MODE_LABELS.get(k) == text", "if text in (k, MODE_LABELS.get(k))")]),
+    ("select accepts any labelled mode, offered or not",
+     [("(k for k in modes if MODE_LABELS.get(k) == text)",
+       "(k for k in MODE_LABELS if MODE_LABELS.get(k) == text)")]),
+    ("command topic loosened", [('/([a-z0-9_]+)/(mode|use)/set")', '/(.+)/(mode|use)/set")')]),
+    ("command topic matched as a prefix",
+     [("_COMMAND_RE.fullmatch(topic)", "_COMMAND_RE.search(topic)")]),
+    ("store list not filtered",
+     [("and _MODE_CONFIG_RE.fullmatch(t)\n", "and True\n")]),
+    ("current configs also removed", [("and t not in keep))", "))")]),
+    ("commands published retained by HA", [('cfg["retain"] = False', 'cfg["retain"] = True')]),
+    ("retractions not published",
+     [('            self.client.publish(topic, "", retain=True)\n', "            pass\n")]),
+]
+_p2_surv = []
+for label, pairs in P2_MUTATIONS:
+    got = properties(load(pairs))
+    got.update(p2_properties(load(pairs)))
+    broke = sorted(k for k, v in {**SHIPPED, **P2_SHIPPED}.items()
+                   if v is True and got.get(k) is not True)
+    print(f"    {'RED ' if broke else 'GREEN'} {label}"
+          + (f"  (breaks: {', '.join(broke)})" if broke else ""))
+    if not broke:
+        _p2_surv.append(label)
+check(f"all {len(P2_MUTATIONS)} P2 mutations of app/mqtt.py are red",
+      not _p2_surv)
+
+
 # ---------------------------------------------------------------------------
 print()
 if fails: