UX-10: the last plain-language leftovers: log lines, two table rows, 'Why: Other', red at 0 s
checks / unit (pull_request) Successful in 9m3s
infra-pin / fresh (pull_request) Successful in 2s

- test_messages.py part 6: every dynamic part of a WARNING+ line is classified
  as data or as a built text, and every built text is produced by the real
  code and checked. This is the gap the 2d scan had: it counted `%s` as one
  word, so reasons built by loop_clamp_note() and friends were never seen.
- Quoted reasons rewritten to STYLE.md (red-alarm shape, codes kept):
  OUTPUT_CLAMP, METER_FROZEN, CIRCULATING_POWER, STALE_READING, the peak
  guard (codes now PEAK_GUARD*), the migration report, price feed, price
  history and gate reasons. Plurals via messages.times()/count().
- Top table: Price history "96 prices over 24 hours for 26 Sep", Tariff
  "one every 15 minutes or every hour", "not final yet" dropped.
- Levels and noise: per-cycle shadow line DEBUG, shadow on/off INFO,
  aiohttp access log only at log level debug, settings warnings once per
  start, one plain line per Home Assistant outage (hass.Outage).
- INFO jargon and error texts: no "§8.3", ISO times, "banked", "keys ARE",
  "NOT_OBSERVED", "did NOT land", "AND".
- Display bugs: WHY_WINNER covers every winner and safety reason
  (main.why_key(), part 7 finds them in the code); the meter row is amber
  "waiting for the first reading" inside its limit after a start; the
  missing-reading age is counted when the page asks.
- STYLE.md and DECISIONS/UX-08-short-notifications.md (UX-10 section).

No change to safety behaviour, alarm levels, notification ids, triggers,
cadence or the banner cascade. One row colour changes (meter at start),
justified in DECISIONS.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
glenn schrooyen
2026-09-27 10:58:43 +02:00
co-authored by Claude Opus 5.5
parent 125b0702a2
commit 23a3a3f5b5
33 changed files with 1268 additions and 347 deletions
+1 -1
View File
@@ -250,7 +250,7 @@ class Allocation:
f"{self.tick!r} and this is tick {tick!r} - a record whose "
f"envelopes have moved cannot authorise a write")
if not self.ok:
return f"the allocator refused this tick ({self.explain()})"
return f"no power split was possible this tick ({self.explain()})"
if unit not in self.shares:
return (f"{unit} has no share in this tick's allocation "
f"({self.explain()})")
+4 -4
View File
@@ -325,12 +325,12 @@ class CirculationWatchdog:
return False
self.tripped = True
# UX-10: plain sentences, every figure kept (test_messages.py part 6).
self.reason = (
f"CIRCULATING_POWER: {circ_w:.0f} W measured going round between "
f"the inverters (peak {self.peak_w:.0f} W) for {held:.0f} s "
f"continuously - the meter cannot see it, because it nets to zero "
f"there (limits: over {self.cfg.min_w:.0f} W, held over "
f"{self.cfg.hold_s:.0f} s)")
f"the inverters for {held:.0f} s, peaking at {self.peak_w:.0f} W. "
f"The meter cannot see it, because it nets to zero there. Limits: "
f"over {self.cfg.min_w:.0f} W, held over {self.cfg.hold_s:.0f} s")
return True
def held_s(self, now: datetime) -> float:
+25 -16
View File
@@ -142,6 +142,8 @@ import math
from dataclasses import dataclass
from datetime import datetime
from . import messages
# The reason code, distinct from any saturation-freeze code by construction:
# nothing else in this add-on uses it. See "DISTINCT FROM SATURATION".
REASON_CODE = "OUTPUT_CLAMP"
@@ -234,31 +236,38 @@ CLEAR_CYCLES = 3
SUSTAINED_CYCLES = 3
BUG_SIGNAL = ("This is a BUG SIGNAL, not a limit being used: something "
"upstream computed a setpoint the actuator cannot deliver.")
# UX-10: the reasons below are quoted by a WARNING or ERROR line, so they
# follow STYLE.md's rule for a quoted reason (test_messages.py part 6): no
# final full stop, the line adds it. The line around them says "software
# fault" for an over-rating, so the reason does not.
def loop_clamp_note(d) -> str:
"""The loop-side alarm text for one `control.Decision`, or "".
SAFETY-40: the integrator bound is anti-windup doing its job and says so;
only a command over the rating is a BUG SIGNAL. Every number is the
only a command over the rating is a software fault. Every number is the
decision's own, i.e. from the tick that clamped.
"""
if d.clamped:
return (f"{REASON_CODE}: the loop computed {d.requested_w:+.0f} W, over "
f"the {abs(d.clamped_w):.0f} W rating, and it was clamped to "
f"{d.clamped_w:+.0f} W; the loop's command this cycle was "
f"{d.target_w:+.0f} W. {BUG_SIGNAL}")
return (f"{REASON_CODE}: the add-on computed {d.requested_w:+.0f} W, "
f"over the {abs(d.clamped_w):.0f} W rating, and cut it back to "
f"{d.clamped_w:+.0f} W. The command this cycle was "
f"{d.target_w:+.0f} W")
if d.i_clamped:
return (f"{REASON_CODE}: the loop's integrator reached its "
f"{d.i_bound_w:+.0f} W anti-windup bound; the loop's command "
f"this cycle was {d.target_w:+.0f} W. Brief "
f"engagements after a large load or solar step are normal. If it "
f"persists, check that the battery is following its commands.")
return (f"{REASON_CODE}: the correction the add-on builds up reached "
f"its {d.i_bound_w:+.0f} W limit. The command this cycle was "
f"{d.target_w:+.0f} W")
return ""
def write_clamp_note(named) -> str:
"""The write-side alarm text: `named` is `[(inverter name, ClampResult)]`
for every inverter whose write was cut back this cycle."""
return ". ".join(f"{name}: {r.describe()}" for name, r in named)
@dataclass(frozen=True)
class ClampResult:
"""What the guard did, with the RAW value preserved.
@@ -275,10 +284,10 @@ class ClampResult:
bound: str = "" # "" | "max_w" | "device" - which stage bit
def describe(self) -> str:
return (f"{REASON_CODE}: the computed setpoint {self.requested_w:+.0f} W "
f"was clamped to {self.applied_w:+.0f} W by the {self.bound} "
f"bound (rating {self.limit_w:.0f} W) - something upstream is "
f"winding")
return (f"{REASON_CODE}: asked {self.requested_w:+.0f} W and sent "
f"{self.applied_w:+.0f} W, cut back by "
f"{messages.LIMIT_WORDS.get(self.bound, self.bound)}, with a "
f"{self.limit_w:.0f} W rating")
def is_commandable(value) -> bool:
+8 -6
View File
@@ -424,15 +424,17 @@ class FreezeWatchdog:
# page was telling, printed into the log and the HA notification where
# it would outlive the page.
ceiling = rail_ceiling_w(max_w, dev_min=dev_min, dev_max=dev_max)
# UX-10: plain sentences, every figure kept (test_messages.py part 6).
capped = ("" if ceiling >= abs(float(max_w))
else f", capped from max_w {float(max_w):.0f} W by the "
f"setpoint device's own rating")
f"inverter's own rating")
self.reason = (
f"METER_FROZEN: the meter has answered {float(unchanged_s):.0f} s "
f"without its measurement changing while the command stands at "
f"{float(commanded_w):+.0f} W, at the {ceiling:.0f} W rail{capped} "
f"(limits: unchanged over {self.cfg.hold_s:.0f} s, command over "
f"{rail_w(max_w, dev_min=dev_min, dev_max=dev_max):.0f} W)")
f"METER_FROZEN: the meter has not changed for "
f"{float(unchanged_s):.0f} s while the command is "
f"{float(commanded_w):+.0f} W, at the {ceiling:.0f} W limit"
f"{capped}. Limits: unchanged over {self.cfg.hold_s:.0f} s, "
f"command over "
f"{rail_w(max_w, dev_min=dev_min, dev_max=dev_max):.0f} W")
if self.active:
return False
self.active = True
+19 -22
View File
@@ -594,31 +594,28 @@ class Freshness:
# ("what did the register do" against "can I trust this entity"). One
# helper serving both would have to drop whichever half the other does
# not need, and the half it dropped would be the operator's next step.
# UX-10: three plain sentences (test_messages.py part 6). SAFETY-56's
# two explanations stay, in this order, and so does the admission
# that this check cannot tell them apart. The reading is treated as
# missing either way, which the log line around this says.
# ⚠️ SAFETY-57, AND THE THREE DURATIONS ARE THREE DIFFERENT FACTS, each
# in its own slot: the register's unchanged time, the WINDOW this
# verdict actually rests on after a release (`regraded`), and how many
# times this unit has been round the loop. Without the second one the
# sentence reads as though 92 s of unchanged register were what was
# compared against the 35 s limit, and it was not.
regraded = (f", checked {self.releases + 1} times over a {held_s:.0f} s "
f"window since the last stop was withdrawn"
if self.releases else "")
self.reason = (
f"STALE_READING: {self.held:+.0f} unchanged for {shown_s:.0f} s "
f"while the standing command moved {moved_w:.0f} W to "
f"{standing_w:+.0f} W. TWO THINGS LOOK LIKE THIS AND THIS GATE "
f"CANNOT TELL THEM APART: the register may have stopped reporting "
f"reality, or the source may be unable to comply with the command "
f"- a pack the BMS is refusing holds still under any setpoint, and "
f"an honest register then reads exactly like a frozen one. Either "
f"way the number cannot be read as this command's effect, so it is "
f"reported as MISSING rather than as a measurement (limits: "
f"STALE_READING: {self.held:+.0f} W unchanged for {shown_s:.0f} s "
f"while the command moved {moved_w:.0f} W to {standing_w:+.0f} W"
f"{regraded}. The reading may have stopped, or the battery may be "
f"unable to follow the command, and this check cannot tell which. "
f"Limits: "
f"unchanged over {self.bound.unchanged_s:.0f} s, command over "
f"{self.bound.move_w:.0f} W and moved by over "
f"{self.bound.move_w:.0f} W)")
# ⚠️ SAFETY-57, AND THE THREE DURATIONS ARE THREE DIFFERENT FACTS, each
# in its own slot: the register's unchanged time is in the sentence
# above, the WINDOW this verdict actually rests on is here, and so is
# how many times this unit has been round the loop. Without the second
# one the sentence reads as though 92 s of unchanged register were what
# was compared against the 35 s limit, and it was not.
if self.releases:
self.reason += (
f" [re-graded: the {held_s:.0f} s window this verdict rests on "
f"opened when the previous one was withdrawn, not when the "
f"register last moved - this unit has now been graded "
f"{self.releases + 1} times]")
f"{self.bound.move_w:.0f} W")
def unchanged_s(self, now_mono) -> float | None:
"""Seconds since an arrival carried a different number. Status page.
+49
View File
@@ -16,6 +16,38 @@ _LOG = logging.getLogger("goodwe.hass")
CORE_API = "http://supervisor/core/api"
SUPERVISOR_API = "http://supervisor"
BAD_STATES = ("unknown", "unavailable", "none", "")
# What the Supervisor's proxy answers while Home Assistant restarts.
UNAVAILABLE = (502, 503, 504)
class Outage:
"""UX-10: Home Assistant not answering, said in one plain line per outage.
A restart takes the REST API and the meter websocket down together, and
each used to log the library's own text for every entity and service
("502, message='Bad Gateway', url=URL(...)", "Received message 8:1000 is
not str"). Now the first channel to fail says it once at WARNING, the raw
text goes to DEBUG, and the last channel to recover says so at INFO.
"""
def __init__(self):
self.down_on = set()
def down(self, channel: str, what: str, detail) -> None:
if not self.down_on:
_LOG.warning("Home Assistant is not answering (%s), perhaps it is "
"restarting. The add-on keeps trying.", what)
self.down_on.add(channel)
_LOG.debug("Home Assistant not answering on %s: %s", channel, detail)
def up(self, channel: str) -> None:
if channel in self.down_on:
self.down_on.discard(channel)
if not self.down_on:
_LOG.info("Home Assistant answers again.")
OUTAGE = Outage()
class HomeAssistant:
@@ -58,10 +90,18 @@ class HomeAssistant:
async with self.session.get(
f"{CORE_API}/states/{entity_id}", headers=self._headers, timeout=10
) as resp:
if resp.status in UNAVAILABLE:
OUTAGE.down("api", f"error {resp.status}",
f"read {entity_id}: {resp.status}")
return None
OUTAGE.up("api")
if resp.status == 404:
return None
resp.raise_for_status()
obj = await resp.json()
except aiohttp.ClientConnectionError as err:
OUTAGE.down("api", "no connection", f"read {entity_id}: {err}")
return None
# SAFETY-61: an undecodable body is an absence like any other failed
# read, never an exception into the control loop.
except (aiohttp.ClientError, TimeoutError, ValueError) as err:
@@ -113,6 +153,11 @@ class HomeAssistant:
f"{CORE_API}/services/{domain}/{service}",
headers=self._headers, json=data, timeout=10,
) as resp:
if resp.status in UNAVAILABLE:
OUTAGE.down("api", f"error {resp.status}",
f"service {domain}.{service}: {resp.status}")
return False
OUTAGE.up("api")
if resp.status >= 400:
body = await resp.text()
# 400 here usually means out-of-range for the entity - the
@@ -124,6 +169,10 @@ class HomeAssistant:
domain, service, resp.status, body[:200])
return False
return True
except aiohttp.ClientConnectionError as err:
OUTAGE.down("api", "no connection",
f"service {domain}.{service}: {err}")
return False
# ValueError: an undecodable error body (SAFETY-61) is a failed write.
except (aiohttp.ClientError, TimeoutError, ValueError) as err:
self._moan(f"svcerr:{domain}.{service}", "service %s.%s failed: %s",
+91 -41
View File
@@ -49,8 +49,8 @@ from .circulation import (
circulating_w, opposing,
)
from .clamp import (
BUG_SIGNAL as CLAMP_BUG_SIGNAL, REASON_CODE as CLAMP_REASON, ClampWatchdog,
clamp_to_rating, is_commandable, loop_clamp_note,
REASON_CODE as CLAMP_REASON, ClampWatchdog,
clamp_to_rating, is_commandable, loop_clamp_note, write_clamp_note,
)
from . import freshness
from . import messages
@@ -230,6 +230,22 @@ def pack_energy_of(inv):
inv.capacity_kwh, inv.max_w)
def why_key(winner: str, claims) -> str:
"""The key of `messages.WHY_WINNER` for a resolution's winner.
"safety" and "failsafe" each stand for several causes, so for those the
winning claim's own reason is the key ("stopped", "inputs missing", "sign
disagreement"). A failsafe with no claim of its own is the arbiter's "no
claim was made", or main.py's refusal to split the power ("unsplit").
"""
if winner in ("safety", "failsafe"):
return next((c.reason for c in claims
if c.source == winner and c.kind == "set"),
"no claim was made" if not any(
c.kind == "set" for c in claims) else "unsplit")
return winner
def tariff_plan_row(plan, tick_words: str, *, age_s, horizon_h: float,
provider: bool, max_age_s: float) -> str:
"""The *Tariff* status row: the 30 s tick's sentence AND the provider plan.
@@ -544,7 +560,7 @@ class Controller:
# re-arm anything. It is still the difference between a pack that is
# recalibrated on schedule and one that silently is not, which is
# §12's opening sentence, so it is said where an operator looks.
self.log_event("maintenance history did NOT migrate cleanly: "
self.log_event("maintenance history did not move over cleanly: "
+ self.maint_migration.explain(),
hint=messages.hint("maint_history"))
# ⚠️ ONE CONFIG, N MACHINES. The `maintenance_*` options describe the
@@ -750,7 +766,7 @@ class Controller:
self.peak = PeakTracker(self.peak_store,
cap_w=float(opts.get("peak_cap_w", 3500)))
self.peak.restore(self.p1.averager)
_LOG.info("capacity-tariff peak store: %s", self.peak.restore_state)
_LOG.info("Month peak store: %s", self.peak.restore_state)
# FCST-04. The §8.3 carry-forward store: the published prices of the
# last few Brussels days, so the hours a day-ahead feed has not printed
@@ -786,7 +802,7 @@ class Controller:
# `.words` read below are unguarded, and a cache that raises here is an
# add-on that does not start.
self.price_history = PriceHistory(price_history_path)
_LOG.info("§8.3 price history: %s", self.price_history.words)
_LOG.info("Price history: %s", self.price_history.words)
# SAFETY-07. The guard TARIFF-01 was built for. It is stateless by
# design (peakguard.py holds no history between calls), so the only
@@ -1071,9 +1087,9 @@ class Controller:
"""
rep = self.store_migration
if rep.ran and not rep.ok:
_LOG.error("The saved safety stops did not copy over cleanly "
"(%s), so they are read again from the older saved "
"state.", rep.explain())
_LOG.error("The saved safety stops did not copy over cleanly, so "
"they are read again from the older saved state: %s.",
rep.explain())
data = getattr(store, "data", {})
legacy_tripped = bool(data.get("sign_tripped", False))
if not legacy_tripped or not self.inverters:
@@ -1678,6 +1694,22 @@ class Controller:
"""
return packshare.weights(self.pack_energy, target_w)
@property
def why_words(self) -> str:
"""The page's "Why" line. While control waits for a missing reading
the age is counted when the page asks (UX-10), not frozen at the age
the last cycle saw."""
if self._why_waiting_since is not None:
return messages.why_waiting(max(0.0, (
datetime.now(timezone.utc)
- self._why_waiting_since).total_seconds()))
return self._why_words
@why_words.setter
def why_words(self, text: str) -> None:
self._why_words = text
self._why_waiting_since = None
@property
def inputs_ok(self) -> bool:
"""The site meter, and EVERY pack's own two readings.
@@ -1923,7 +1955,7 @@ class Controller:
# ordered pair (time, then power), and the reason still in `%s`.
_LOG.error("%s: battery power reading stopped changing. Inverters "
"go to 0 W until it changes, or %.0f s after the "
"command drops below %.0f W: %s",
"command drops below %.0f W: %s.",
inv.name, inv.batt_fresh.bound.release_s,
inv.batt_fresh.bound.move_w, inv.batt_fresh.reason)
elif inv.batt_fresh.releases > was_releases:
@@ -2078,9 +2110,10 @@ class Controller:
f"refusing to broadcast {float(value):+.0f} W to "
f"{len(targets)} inverters - that is the ARCH-01 fault; "
f"commanding 0 W", hint=messages.hint("all_blocked"))
_LOG.error("Refused to send %+.0f W to all %d inverters at "
"once, so every inverter is set to 0 W. This is a "
"software fault.", float(value), len(targets))
_LOG.error("Refused to send %+.0f W to all %s at once, so "
"every inverter is set to 0 W. This is a software "
"fault.", float(value),
messages.count(len(targets), "inverter"))
_LOG.debug("ARCH-01: a site target handed to each unit is "
"supplied by each of them, so the gain at the meter "
"becomes N times the per-unit gain. Only 0 W may be "
@@ -2203,10 +2236,11 @@ class Controller:
# one writer, and this is that writer emitting the value it emits for
# every other refusal.
if self.shadow and value != shadow.WIRE_W:
_LOG.info("SHADOW MODE: not commanding %+.0f W to %s - holding "
"%+.0f W. The decision was reached and recorded; "
"nothing was sent to the inverter.",
value, inv.name, shadow.WIRE_W)
# UX-10: DEBUG, because it repeats every cycle in shadow mode. The
# INFO line when shadow mode comes on says the same once.
_LOG.debug("Shadow mode: would send %+.0f W to %s, and holds "
"%+.0f W. Nothing was sent to the inverter.",
value, inv.name, shadow.WIRE_W)
value = shadow.WIRE_W
changed = (inv.last_write is None or value != inv.last_write)
@@ -2666,7 +2700,12 @@ class Controller:
# A single missed poll is not a fault. Hold, keep the heartbeat
# going, and give it a few seconds to come back.
self.reason = f"inputs missing {bad_for:.0f}s"
# UX-10: the age is rendered when the page asks, not frozen at
# this cycle's. With the meter reading gone the grid value
# stops changing, so the next cycle is up to cycle_floor_s
# away and the line used to read "0 seconds" all that time.
self.why_words = messages.why_waiting(bad_for)
self._why_waiting_since = now - timedelta(seconds=bad_for)
return
claims = []
@@ -3505,12 +3544,9 @@ class Controller:
self.reason = resolution.explain()
# UX-08: the same answer in plain words, for the page's "Why" line.
# `reason` stays the technical record the log and the checks read.
_why = resolution.winner
if _why in ("safety", "failsafe"):
_why = next((c.reason for c in claims
if c.source == _why and c.kind == "set"),
"no claim was made" if not any(
c.kind == "set" for c in claims) else "unsplit")
# UX-10: `why_key()` maps a safety winner to its claim's reason, and
# every key it can return has words in messages.WHY_WINNER.
_why = why_key(resolution.winner, claims)
self.why_words = messages.why(_why, resolution.target_w,
resolution.bound_by,
contradiction=resolution.contradiction)
@@ -3692,7 +3728,9 @@ class Controller:
self.o, control_started=self.auto)
+ f"; inverter held at {shadow.WIRE_W:.0f} W",
hint=messages.hint("shadow_on"))
_LOG.warning(
# UX-10: INFO. It follows a setting or a button press, and
# no person has to act on it.
_LOG.info(
"Shadow mode is on, so every inverter stays at %.0f W and "
"nothing the add-on decides is sent. %s.", shadow.WIRE_W,
shadow.why(self.o, control_started=self.auto))
@@ -3701,7 +3739,7 @@ class Controller:
"SHADOW MODE OFF - the battery is being controlled again, "
f"resuming from {shadow.WIRE_W:.0f} W",
hint=messages.hint("shadow_off"))
_LOG.warning(
_LOG.info(
"Shadow mode is off, so the add-on controls the battery "
"again, starting from %.0f W.", shadow.WIRE_W)
if not engaged:
@@ -3776,8 +3814,8 @@ class Controller:
# SAFETY-40: only an over-rating is a bug; the integrator bound is not.
bug = engaged_write or loop_bug
if engaged_write:
reason = (", ".join(f"{inv.name}: {inv.clamp_last.describe()}"
for inv in clamped_units) + ". " + CLAMP_BUG_SIGNAL)
reason = write_clamp_note([(inv.name, inv.clamp_last)
for inv in clamped_units])
_named = len(self.inverters) > 1
facts = [messages.Clamp(inv.name if _named else None,
inv.clamp_last.requested_w,
@@ -3824,16 +3862,19 @@ class Controller:
# SAFETY-40: the integrator bound is anti-windup, not a bug - a
# WARNING and a plainly titled notice, same cadence. Its OWN id, so
# it can never replace a BUG SIGNAL notice still on screen.
_LOG.warning("The battery gives less than asked: %s Held back %d "
"times so far.", self.clamp_wd.reason,
self.clamp_wd.engagements)
_LOG.warning("The battery gives less than asked: %s. Held back %s "
"so far.", self.clamp_wd.reason,
messages.times(self.clamp_wd.engagements))
_LOG.debug("A short hold after a large load or solar step is "
"normal. If it lasts, check that the battery follows "
"its commands.")
await self.hass.call("persistent_notification", "create",
messages.loop_bound().data())
return
_LOG.error(
"Power request too high, which is a software fault: %s Control is "
"still running. Cut back %d times so far.",
self.clamp_wd.reason, self.clamp_wd.engagements)
"Power request too high, which is a software fault: %s. Control is "
"still running. Cut back %s so far.",
self.clamp_wd.reason, messages.times(self.clamp_wd.engagements))
_LOG.debug(
"SAFETY-03: silently clipping this is how a winding integrator "
"reached 14 768 W on this project before. The clamp makes every "
@@ -3878,7 +3919,7 @@ class Controller:
was, self._peak_saturated = self._peak_saturated, saturated
if not saturated or was:
return
self.log_event("PEAK GUARD SATURATED - " + g.reason,
self.log_event("PEAK_GUARD_SATURATED - " + g.reason,
hint=messages.hint("peak_saturated"))
_LOG.error(
"The battery is asked for all it can give, but this 15-minute "
@@ -3933,7 +3974,7 @@ class Controller:
was, self._peak_floor_limited = self._peak_floor_limited, limited
if not limited or was:
return
# No prefix: `reason` already opens with PEAK GUARD FLOOR-LIMITED, and
# No prefix: `reason` already opens with PEAK_GUARD_FLOOR_LIMITED, and
# a second copy is the kind of stutter that makes a 40-line action log
# read like boilerplate. The saturated path needs its prefix because its
# reason carries the word in the middle of a sentence, not at the front.
@@ -4217,10 +4258,9 @@ class Controller:
if keep:
_LOG.warning(
"The price update was incomplete (%s), so the plan "
"from %s, %.0f s ago, is kept until it is %.0f s old.",
plan.words, self.tariff_at,
(now - self.tariff_at).total_seconds(),
TARIFF_MAX_AGE_S)
"from %s is kept until it is %s old.",
plan.words, messages.when(brussels(self.tariff_at)),
messages.duration(TARIFF_MAX_AGE_S))
else:
self.tariff_plan, self.tariff_at = plan, now
_LOG.info("tariff refreshed: %s", plan.words)
@@ -4231,8 +4271,9 @@ class Controller:
# the same reason and on the same terms.
_LOG.warning(
"The price update failed (%s), so the plan from %s is kept "
"until it is %.0f s old, and trading stops then.",
err, self.tariff_at, TARIFF_MAX_AGE_S)
"until it is %s old, and trading stops then.",
err, messages.when(brussels(self.tariff_at)),
messages.duration(TARIFF_MAX_AGE_S))
with contextlib.suppress(asyncio.TimeoutError):
await asyncio.wait_for(self.stop_event.wait(),
timeout=TARIFF_REFRESH_S)
@@ -4612,7 +4653,16 @@ class Controller:
"text": messages.row_controller_ran(_pass_age)})
if self.p1_enabled:
age = self.p1.published_age_s
if self.p1.stale:
if (self.p1.stale and self.p1.age_s() is None
and age <= self.p1.max_age_s):
# UX-10: no reading yet since the start, still inside the
# limit. Amber, not red: it is not a fault yet, but control
# waits for it. Red at 0 s contradicted the limit the row
# prints. Past the limit it is the red row below, as before.
out.append({"ok": False, "warn": True, "id": "meter",
"text": messages.row_meter_waiting(
self.p1.max_age_s)})
elif self.p1.stale:
# The last error is on the add-on log's WARNING line (p1.py).
out.append({"ok": False, "warn": False, "id": "meter",
"text": messages.row_meter_stale(
+4 -5
View File
@@ -351,7 +351,7 @@ class Maintenance:
the action log rather than watching nothing happen.
"""
if blocked_by:
msg = (f"maintenance: forced start REFUSED on {self.name} - "
msg = (f"maintenance: {self.name} cannot start now, because "
f"{blocked_by}")
_LOG.warning("%s", msg)
return [msg]
@@ -378,10 +378,9 @@ class Maintenance:
"""
if self._deferred != why:
self._deferred = why
msg = (f"maintenance: {self.name} is due and is WAITING its turn - "
f"{why}. It is idle under the control loop and will "
f"recalibrate at the next start hour once the slot is free; "
f"this is not a stalled phase.")
msg = (f"maintenance: {self.name} is due and waits its turn, "
f"because {why}. It starts at the next start hour once the "
f"other battery is done. This is not a stalled phase.")
_LOG.info("%s", msg)
events.append(msg)
return events
+21
View File
@@ -315,6 +315,17 @@ def times(n) -> str:
return "1 time" if int(n) == 1 else f"{int(n)} times"
def count(n, noun, plural=None) -> str:
"""`count(1, "price")` -> `1 price`, `count(3, "price")` -> `3 prices`."""
return f"{int(n)} {noun if int(n) == 1 else plural or noun + 's'}"
def when(at) -> str:
"""`27 Sep at 09:15`, as the page writes a moment. `at` is already in the
time zone the reader wants (the caller passes `price.brussels(t)`)."""
return f"{at.day} {at:%b} at {at:%H:%M}"
def for_unit(unit) -> str:
"""` for inverter-b` on a site with several inverters, else nothing."""
return f" for {unit}" if unit else ""
@@ -383,6 +394,11 @@ def row_controller_stalled(age_s, veto_s) -> str:
f"sets the inverter to 0 W after {seconds(veto_s)}.")
def row_meter_waiting(limit_s) -> str:
"""UX-10: no reading yet since the start, and still inside the limit."""
return f"Meter: waiting for the first reading, limit {seconds(limit_s)}"
def row_meter_stale(age_s, limit_s) -> str:
return (f"Meter: no reading for {seconds(age_s)}, limit "
f"{seconds(limit_s)}. The add-on log shows why.")
@@ -766,6 +782,10 @@ WHY_WINNER = {
"stopped": "Control is stopped",
"inputs missing": "A reading is missing",
"no claim was made": "Nothing asked for power",
# UX-10: the claim reasons main.why_key() can return for a safety or
# failsafe winner. test_messages.py part 7 finds every one in the code.
"sign disagreement": "Safety stop, power went the wrong way",
"unsplit": "The power could not be split, all at 0 W",
}
WHY_LIMIT = {
"peak(quarter peak)": "the peak limit",
@@ -898,6 +918,7 @@ def status_samples() -> list:
("row_controller_ran", GREEN, row_controller_ran(2)),
("row_controller_stalled", RED, row_controller_stalled(45, 30)),
("row_meter_stale", RED, row_meter_stale(40, 10)),
("row_meter_waiting", AMBER, row_meter_waiting(30)),
("row_meter", GREEN, row_meter(-350, 2, 3, 340)),
("row_meter_frozen", RED, row_meter_frozen()),
*(("row_freeze_off", AMBER, row_freeze_off(k)) for k in FREEZE_OFF),
+20 -4
View File
@@ -48,6 +48,7 @@ from datetime import datetime, timezone
import aiohttp
from . import messages
from .hass import OUTAGE
_S = messages.setting # a refusal names the setting by its label (UX-08)
@@ -524,6 +525,16 @@ WS_URL = "ws://supervisor/core/websocket"
BAD_STATES = ("unknown", "unavailable", "none", "")
async def _receive_json(ws):
"""The next JSON message. A socket Home Assistant closed (a restart) is a
ConnectionResetError, not aiohttp's "Received message 8:1000 is not str"."""
msg = await ws.receive()
if msg.type is not aiohttp.WSMsgType.TEXT:
raise ConnectionResetError(
f"Home Assistant closed the connection ({msg.type.name})")
return json.loads(msg.data)
class HaDsmrSource:
"""Subscribes to state_changed for the configured DSMR entities.
@@ -574,8 +585,12 @@ class HaDsmrSource:
backoff = 1.0
except asyncio.CancelledError:
raise
except (aiohttp.ClientError, ConnectionError) as err:
# UX-10: Home Assistant restarting, said once (hass.Outage).
OUTAGE.down("websocket", "the meter connection closed", err)
except Exception as err: # noqa: BLE001 - any transport fault retries
_LOG.warning("P1 HA websocket: %s - reconnecting in %.0fs", err, backoff)
_LOG.warning("The meter connection to Home Assistant failed "
"(%s), trying again in %.0f s.", err, backoff)
finally:
self.connected = False
await asyncio.sleep(backoff)
@@ -583,16 +598,17 @@ class HaDsmrSource:
async def _session_once(self) -> None:
async with self.session.ws_connect(WS_URL, heartbeat=30) as ws:
hello = await ws.receive_json()
hello = await _receive_json(ws)
if hello.get("type") == "auth_required":
await ws.send_json({"type": "auth", "access_token": self.token})
reply = await ws.receive_json()
reply = await _receive_json(ws)
if reply.get("type") != "auth_ok":
raise RuntimeError(f"auth rejected: {reply.get('message', reply)}")
await ws.send_json({"id": 1, "type": "subscribe_events",
"event_type": "state_changed"})
await ws.send_json({"id": 2, "type": "get_states"})
self.connected = True
OUTAGE.up("websocket")
_LOG.info("P1 ingest: subscribed to %s", ", ".join(sorted(self.ids)))
async for msg in ws:
@@ -618,7 +634,7 @@ class HaDsmrSource:
new = data.get("new_state") or {}
self._absorb(data.get("entity_id"), new.get("state"))
self._schedule()
raise RuntimeError("websocket closed")
raise ConnectionResetError("Home Assistant closed the connection")
def _absorb(self, entity_id: str | None, state) -> None:
if not entity_id or entity_id not in self.ids:
+34 -32
View File
@@ -402,27 +402,27 @@ from .tariff import QUARTER_S
# Why the projection may not be graded. Reasons, not booleans: the status page
# and the action log both have to say WHICH, and "blind" alone is unactionable.
BLIND_NO_BLOCK = "no open quarter - the meter has produced no sample yet"
BLIND_NO_BLOCK = "no open 15-minute period, the meter has given no reading yet"
BLIND_COVERAGE = "meter gap"
BLIND_FROZEN = "SAFETY-18: the meter is answering without changing"
BLIND_FROZEN = "the meter is answering without changing"
# Where the ceiling came from. Only the second is a relaxation, and only an
# OBSERVED reading may produce it.
CEILING_CAP = "peak_cap_w"
CEILING_MONTH_PEAK = "the month's banked peak"
CEILING_MONTH_PEAK = "this month's peak"
# SAFETY-24. Why the forced discharge may not be sized. Reasons, not booleans,
# for BLIND_*'s reason: the status page, the action log and the operator
# notification all have to say WHICH, and "floor-limited" alone is unactionable.
FLOOR_SOC_UNREADABLE = ("the battery state of charge was not measured this "
"cycle, and an unreadable SoC is not a full battery")
# ⚠️ SAFETY-25. "the peak guard's SoC floor", not "the SoC floor", and the
# possessive is load-bearing: this string is what the status page, the action log
# and the operator notification all print, and `peak_soc_floor` bounds THIS GUARD
# ONLY. Widening it to "the SoC floor" would make the one sentence an operator
# reads at the moment the battery stops shaving into a claim about the pack that
# the grid-following loop is at that instant disproving.
FLOOR_AT_SOC_FLOOR = "state of charge is at or below the peak guard's SoC floor"
FLOOR_SOC_UNREADABLE = ("the battery level was not read this cycle, and an "
"unread level is not a full battery")
# ⚠️ SAFETY-25. "the peak reserve", not "the SoC floor", and the name is
# load-bearing: this string is what the action log and the add-on log print,
# and `peak_soc_floor` (“Peak reserve”) bounds THIS GUARD ONLY. Widening it to
# "the SoC floor" would make the one sentence an operator reads at the moment
# the battery stops shaving into a claim about the pack that the
# grid-following loop is at that instant disproving.
FLOOR_AT_SOC_FLOOR = "the battery level is at or below the peak reserve"
SOURCE = "peak"
@@ -566,8 +566,9 @@ def blindness(projection, max_hold_s, frozen: bool) -> str | None:
return BLIND_NO_BLOCK
gap = uncovered_s(projection)
if max_hold_s is not None and gap > float(max_hold_s):
return (f"{BLIND_COVERAGE}: {gap:.0f} s of this quarter uncovered, past "
f"the {float(max_hold_s):.0f} s the averager will hold a sample")
return (f"{BLIND_COVERAGE}, {gap:.0f} s of this 15-minute period not "
f"covered, past the {float(max_hold_s):.0f} s a reading is "
f"held")
return None
@@ -743,9 +744,9 @@ def decide(projection, *, batt_w, cap_w, reading, achievable_w, soc, soc_floor,
return PeakDecision(
engaged=True, floor_w=0.0, ceiling_w=ceiling, ceiling_from=from_where,
blind=blind, projected_w=None,
reason=(f"PEAK GUARD BLIND ({blind}) - the battery may not import "
f"while the billed quarter cannot be measured; commanding no "
f"charging (floor 0 W)"))
reason=(f"PEAK_GUARD_BLIND: {blind}. The battery may not charge "
f"while this 15-minute period cannot be measured, so it "
f"is asked for no charging, floor 0 W"))
projected = float(projection.projected_w)
if batt_w is None:
@@ -807,17 +808,18 @@ def decide(projection, *, batt_w, cap_w, reading, achievable_w, soc, soc_floor,
ceiling_from=from_where, projected_w=projected, excess_w=ex,
wanted_w=wanted, floor_limited=True, soc=soc, soc_floor=soc_floor,
soc_floor_reason=denied,
# UX-10: plain sentences, every figure kept (test_messages.py
# part 6). The code is one token, so it is not read as shouting.
reason=(
f"PEAK GUARD FLOOR-LIMITED: the quarter projects "
f"{projected:.0f} W against a {ceiling:.0f} W ceiling "
f"({from_where}) and {wanted:+.0f} W of discharge would hold "
f"it, but {denied}"
+ ("" if soc is None else f" ({float(soc):.0f} %")
f"PEAK_GUARD_FLOOR_LIMITED: this 15-minute period heads for "
f"{projected:.0f} W against a {ceiling:.0f} W limit "
f"({from_where}), and {wanted:+.0f} W from the battery would "
f"hold it. But {denied}"
+ ("" if soc is None else f", at {float(soc):.0f} %")
+ ("" if soc is None or soc_floor is None
else f" vs {float(soc_floor):.0f} %")
+ ("" if soc is None else ")")
+ " - commanding no forced discharge, so THIS QUARTER WILL GO "
"OVER THE CEILING. Charging stays blocked (floor 0 W)"))
else f" against {float(soc_floor):.0f} %")
+ ". So there is no forced discharge and no charging, floor "
"0 W, and this period will go over the limit"))
floor = min(wanted, ceil_top)
saturated = floor < wanted
@@ -826,13 +828,13 @@ def decide(projection, *, batt_w, cap_w, reading, achievable_w, soc, soc_floor,
blind=None, projected_w=projected, excess_w=ex, wanted_w=wanted,
saturated=saturated, soc=soc, soc_floor=soc_floor,
reason=(
f"PEAK GUARD: quarter projects {projected:.0f} W against a "
f"{ceiling:.0f} W ceiling ({from_where}) with "
f"PEAK_GUARD: this 15-minute period heads for {projected:.0f} W "
f"against a {ceiling:.0f} W limit ({from_where}), with "
f"{QUARTER_S - projection.elapsed_s:.0f} s left, so {ex:.0f} W must "
f"come off the meter; battery measured {float(batt_w):+.0f} W, "
f"floor {floor:+.0f} W"
+ (f" - SATURATED, {wanted:+.0f} W was needed and the inverter can "
f"only give {ceil_top:.0f} W" if saturated else "")))
f"come off the meter. The battery measured {float(batt_w):+.0f} W "
f"and is asked for {floor:+.0f} W"
+ (f". {wanted:+.0f} W was needed, but the inverters give at most "
f"{ceil_top:.0f} W" if saturated else "")))
def charge_headroom_w(decision) -> float | None:
+8 -7
View File
@@ -150,6 +150,7 @@ from enum import Enum
from textwrap import dedent
from urllib.parse import urlencode
from . import messages
from .custom_formula import (
EXPORT_FORMULA_OPTION, FormulaInvalid, PREVIEW_HOURS, parse_export_formula,
parse_price_formula, preview_lines, price_eur_kwh, to_resolution)
@@ -1738,11 +1739,11 @@ def _points_from_columnar_json(body, expect_unit, scale,
out.append(RawPoint(start=start, eur_per_kwh=float(v) * scale,
provisional=bool(provisional_default)))
if dropped:
_LOG.warning("The price feed gave no price for %d of %d times (index "
"%s). Those times are left out, not counted as free.",
len(dropped), len(times),
_LOG.warning("The price feed gave no price for %d of %s, at index "
"%s. Those are left out, not counted as free.",
len(dropped), messages.count(len(times), "time"),
", ".join(str(i) for i in dropped[:5])
+ (", ..." if len(dropped) > 5 else ""))
+ (" and more" if len(dropped) > 5 else ""))
if not out:
raise SourceUnavailable(
f"the feed carried {len(times)} instants and a price for none of "
@@ -2106,12 +2107,12 @@ async def load_prices(opts: dict, since: datetime, until: datetime,
pid = provider_id(opts)
if not provider_configured(opts):
return PriceRead.no_data(
"no price provider configured (price_provider is 'off'); "
"§11.4: static profile, plan provisional, no arbitrage")
"no price feed is set (price_provider is 'off'), so the fixed "
"tariff is used, the plan is estimated and there is no trading")
cls = PROVIDERS.get(pid)
if cls is None:
return PriceRead.no_data(
f"unknown price provider {pid!r}; shipped: "
f"unknown price provider {pid!r}. The known ones are "
f"{', '.join(sorted(PROVIDERS))}")
caps = cls.capabilities()
+27 -24
View File
@@ -164,6 +164,7 @@ from dataclasses import dataclass
from datetime import datetime, timedelta, timezone
from enum import Enum
from . import messages
from .maintenance import CHARGE_TIMEOUT_MIN, DRAIN_TIMEOUT_MIN
from .price import PricePoint, PriceRead, _Outcome, brussels
@@ -411,13 +412,14 @@ def fill_from_yesterday(read: PriceRead, *, yesterday: PriceRead,
if not out:
reason = read.match(
series=lambda r: (f"the {len(r.points)} published hours all fall "
f"outside {since.isoformat()}..{until.isoformat()}"),
series=lambda r: (f"all {messages.count(len(r.points), 'published price')} "
f"fall outside {messages.when(brussels(since))} to "
f"{messages.when(brussels(until))}"),
no_data=lambda r: r.reason)
return PriceRead.no_data(
f"§8.3 carry-forward produced no hours: {reason}, and yesterday's "
f"profile has nothing to fill them with either. §11.4 applies: "
f"static profile, plan provisional, no arbitrage")
f"no hours could be filled from yesterday's prices: {reason}. So "
f"the fixed tariff is used, the plan is estimated and there is no "
f"trading")
_audit(out, published)
carried = sum(1 for p in out if _utc_hour(p.start) not in published)
@@ -431,10 +433,11 @@ def fill_from_yesterday(read: PriceRead, *, yesterday: PriceRead,
# hours" about a 48-hour horizon. The fill's unit is the HOUR and the
# feed's is the POINT; nothing derived from one answers for the other.
total_h = len({_utc_hour(p.start) for p in out})
_LOG.info("§8.3: %d of %d hours carried forward from yesterday's "
"profile and flagged provisional; the feed published %d "
"points over the other %d hours",
carried, total_h, len(out) - carried, total_h - carried)
_LOG.info("%s of %d use yesterday's prices, marked as estimated. "
"The feed published %s over the other %s.",
messages.count(carried, "hour"), total_h,
messages.count(len(out) - carried, "price"),
messages.count(total_h - carried, "hour"))
product = read.match(series=lambda r: r.product,
no_data=lambda _r: yesterday.product)
@@ -525,8 +528,8 @@ class _Permitted(Gate):
"one rule this type has.")
self.action = action
self.hours = pts
self.words = (f"{action.name} permitted on {len(pts)} firm hours "
f"({pts[0].start.isoformat()} ..)")
self.words = (f"allowed on {messages.count(len(pts), 'published price')} "
f"from {messages.when(brussels(pts[0].start))}")
class _Blocked(Gate):
@@ -570,8 +573,8 @@ def price_permits(read: PriceRead, now: datetime,
return read.match(
series=lambda r: _walk(r, hours, action),
no_data=lambda r: Gate.block(
f"{action.name} is gated on a price and there is no price data: "
f"{r.reason}. §11.4 - and a missing price is not a cheap one"))
f"{action.name} needs a price and there is none: {r.reason}. A "
f"missing price is not a cheap one"))
def _walk(series, hours, action) -> Gate:
@@ -579,19 +582,18 @@ def _walk(series, hours, action) -> Gate:
for u in hours:
if not series.covers(u):
return Gate.block(
f"{action.name} commits {action.commits_h:g} h from "
f"{hours[0].isoformat()} and no price covers "
f"{u.isoformat()}. An hour outside the series is an hour with "
f"no price (§11.4 for that hour), not a free one")
f"{action.name} needs prices for {action.commits_h:g} hours "
f"from {messages.when(brussels(hours[0]))}, and no price "
f"covers {messages.when(brussels(u))}. An hour with no price "
f"is not a free one")
p = series.at(u)
if p.provisional:
return Gate.block(
f"{action.name} commits {action.commits_h:g} h from "
f"{hours[0].isoformat()} and {u.isoformat()} is PROVISIONAL - "
f"carried from yesterday's profile or standing in for a dead "
f"feed. §8.3: no irreversible action may be taken on a "
f"provisional price. It becomes available when the day-ahead "
f"print lands (~14-16 h CET, §5.4)")
f"{action.name} needs prices for {action.commits_h:g} hours "
f"from {messages.when(brussels(hours[0]))}, and the price for "
f"{messages.when(brussels(u))} is only estimated, from "
f"yesterday or from the fixed tariff. It can start once the "
f"day-ahead prices are published, around 14:00 to 16:00")
pts.append(p)
return Gate.permit(action, pts)
@@ -622,5 +624,6 @@ def _go(maint, now, gate) -> Gate:
def _no(gate) -> Gate:
_LOG.warning("irreversible action refused - %s", gate.reason)
_LOG.warning("An action that cannot be undone does not start: %s.",
gate.reason)
return gate
+54 -37
View File
@@ -186,8 +186,9 @@ import json
import logging
import os
import tempfile
from datetime import datetime, timedelta, timezone
from datetime import date, datetime, timedelta, timezone
from . import messages
from .price import PricePoint, PriceProduct, PriceRead, brussels
from .price_forecast import fill_from_yesterday
@@ -345,8 +346,19 @@ def _row_of(day: str, points: int, hours: int) -> str:
whole day to carry, and that is the HOUR figure; the point count says how
finely it is priced. Neither answers for the other.
"""
return (f"{day} ({points} price{'' if points == 1 else 's'} "
f"over {hours} hour{'' if hours == 1 else 's'})")
# UX-10: the day as the page writes dates ("26 Sep"), not ISO.
return (f"{points} price{'' if points == 1 else 's'} over {hours} "
f"hour{'' if hours == 1 else 's'} for {day_words(day)}")
def day_words(day) -> str:
"""`'2026-09-26'` -> `'26 Sep'`, as the page writes a date. A key that is
not a date is shown as it is, because this feeds a status row."""
try:
d = date.fromisoformat(str(day))
except ValueError:
return str(day)
return f"{d.day} {d:%b}"
def _bad_rows(rec) -> int:
@@ -393,9 +405,8 @@ class PriceHistory:
self.last_error = f"no durable volume at {parent}"
# INFO, not ERROR: on a dev host or in a test container there is no
# /data and nothing is wrong.
_LOG.info("no price history: %s - §8.3 carry-forward has nothing "
"to carry and the horizon stays as short as the feed",
self.last_error)
_LOG.info("No price history is kept (%s), so missing hours are "
"not filled from yesterday's prices.", self.last_error)
return
self.ok = True
self._load()
@@ -449,15 +460,15 @@ class PriceHistory:
# would not notice a writer this build has never met.
if not isinstance(blob, dict) or isinstance(found, bool) \
or not isinstance(found, int) or found != SCHEMA:
self.last_error = f"schema {found!r}, not {SCHEMA}"
_LOG.warning("price history at %s has %s - discarding it rather "
"than guessing what its points mean",
self.last_error = f"version {found!r}, not {SCHEMA}"
_LOG.warning("Price history at %s has %s, so it is not used.",
self.path, self.last_error)
return
days = blob.get("days")
if not isinstance(days, dict):
self.last_error = "no `days` object"
_LOG.warning("price history at %s has %s", self.path, self.last_error)
self.last_error = "no days in it"
_LOG.warning("Price history at %s has %s, so it is not used.",
self.path, self.last_error)
return
self._days = self._usable_days(days)
@@ -504,20 +515,22 @@ class PriceHistory:
kept[key] = rec
notes = []
if dropped:
notes.append(f"{len(dropped)} unusable day record(s) dropped "
f"({', '.join(sorted(dropped))})")
notes.append(f"{messages.count(len(dropped), 'unusable day')} "
f"dropped, " + ", ".join(day_words(d)
for d in sorted(dropped)))
if malformed:
notes.append(
f"{sum(malformed.values())} malformed point row(s) in "
+ ", ".join(f"{d} ({n})" for d, n in sorted(malformed.items())))
f"{messages.count(sum(malformed.values()), 'bad price')} in "
+ ", ".join(f"{day_words(d)} ({n})"
for d, n in sorted(malformed.items())))
if notes:
# Recorded, not silent: `yesterday()` and `words` both report
# `last_error`, and a cache that quietly discards half a file reads
# to an operator exactly like a normal first day.
self.last_error = "; ".join(notes)
_LOG.warning("price history at %s: %s - the controller starts "
"anyway and the horizon is as short as the feed makes "
"it", self.path, self.last_error)
self.last_error = " and ".join(notes)
_LOG.warning("Price history at %s: %s. The add-on starts anyway, "
"and fills in only what the rest holds.",
self.path, self.last_error)
return kept
def _save(self) -> bool:
@@ -680,10 +693,11 @@ class PriceHistory:
# undone with the rest of the merge, so those rows are still in the
# file and the next write that completes drops them again.
self.last_error = (
f"{sum(junked.values())} malformed point row(s) dropped from "
+ ", ".join(f"{d} ({n})" for d, n in sorted(junked.items())))
_LOG.warning("price history at %s: %s - the record is rewritten "
"without them and the refresh continues",
f"{messages.count(sum(junked.values()), 'bad price')} dropped "
f"from " + ", ".join(f"{day_words(d)} ({n})"
for d, n in sorted(junked.items())))
_LOG.warning("Price history at %s: %s. The file is saved without "
"them and the price update goes on.",
self.path, self.last_error)
self._prune(stamp)
if not self._save():
@@ -752,21 +766,23 @@ class PriceHistory:
if self.last_error and not self._days:
return PriceRead.no_data(
f"the price history at {self.path} is {self.last_error}, so "
f"§8.3 has no profile to carry forward for {want}; the plan "
f"covers only the hours the feed published")
f"there are no prices from yesterday to fill in for "
f"{day_words(want)}. The plan covers only the hours the feed "
f"published")
rec = self._days.get(want)
if rec is None:
have = ", ".join(sorted(self._days)) or "no days at all"
have = (", ".join(day_words(d) for d in sorted(self._days))
or "no days at all")
return PriceRead.no_data(
f"no published prices recorded for {want} (held: {have}), so "
f"§8.3 has no profile to carry forward. A record for another "
f"day is not a yesterday")
f"no published prices are kept for {day_words(want)}, only for "
f"{have}, so there are no prices from yesterday to fill in. A "
f"record for another day is not a yesterday")
points, bad = _parse_points(rec.get("points"))
if not points:
why = bad or "it is empty"
return PriceRead.no_data(
f"the {want} record holds no usable point ({why}), and an "
f"empty series is not a free day")
f"the {day_words(want)} record holds no usable price, {why}, "
f"and an empty series is not a free day")
try:
product = PriceProduct(rec.get("product"))
except ValueError:
@@ -775,8 +791,9 @@ class PriceHistory:
f"which is not a PriceProduct. The optimiser switches on that "
f"enum, so a record that cannot name one cannot be a series")
if bad:
_LOG.warning("Price history: %s in the %s record were dropped, "
"and %d points were kept.", bad, want, len(points))
_LOG.warning("Price history: %s dropped from the %s record, and "
"%s kept.", bad, day_words(want),
messages.count(len(points), "price"))
return PriceRead.series(points, product,
str(rec.get("provider") or "price_history"),
stamp)
@@ -805,7 +822,7 @@ class PriceHistory:
if not self._days:
why = f" - {self.last_error}" if self.last_error else ""
return f"empty{why} - nothing to carry forward yet"
held = "; ".join(_row_of(d, *_held(self._days[d]))
held = ", ".join(_row_of(d, *_held(self._days[d]))
for d in sorted(self._days, key=str))
# A file that PARTLY loaded says so, or the dropped days read as days
# that were simply never written.
@@ -833,7 +850,7 @@ def _parse_points(raw) -> tuple:
continue
out.append(pt)
out.sort(key=lambda p: p.start.astimezone(timezone.utc))
return tuple(out), (f"{dropped} malformed point(s)" if dropped else "")
return tuple(out), (messages.count(dropped, "bad price") if dropped else "")
class NoHistory:
@@ -861,5 +878,5 @@ class NoHistory:
def yesterday(self, stamp: datetime) -> PriceRead:
return PriceRead.no_data(
"this caller keeps no price history (NoHistory), so §8.3 has no "
"profile to carry forward")
"this caller keeps no price history, so there are no prices from "
"yesterday to fill in")
+4 -2
View File
@@ -82,6 +82,7 @@ import os
import aiohttp
from . import messages
from .configui import changed_keys
from .inverter import build_roster
from .validate import validate_startup_config, validate_unit_ranges
@@ -381,8 +382,9 @@ async def save(selfcfg: SelfConfig, proposed: dict, expect: str, *,
"""
problems = await problems_for(proposed, hass)
if problems:
_LOG.warning("The settings page did not save, because of %d "
"problems. The first: %s", len(problems), problems[0])
_LOG.warning("The settings page did not save, because of %s. The "
"first: %s", messages.count(len(problems), "problem"),
problems[0])
raise SaveRefused("invalid", problems=problems)
info = await selfcfg.info()
+30 -13
View File
@@ -1130,13 +1130,28 @@ class TariffPlan:
PriceProduct.STATIC: "day/night prices",
PriceProduct.FIXED: "a fixed price"}.get(self.product,
str(self.product))
# UX-10: the spacing in words, and no "not final yet": a plan is
# provisional exactly when it holds an estimated price, which the
# count already says.
gaps = self.spacings_s
return (f"{what} from {tag}, "
f"{self.n_points} prices over {self.hours} hours, "
f"{self.n_firm} published and {self.n_carried} estimated"
+ (f", {'+'.join(str(g) for g in gaps)} s apart"
if gaps else "")
+ (", not final yet" if self.provisional else ""))
+ (f", {spacing_words(gaps)}" if gaps else ""))
def spacing_words(gaps) -> str:
"""`(900, 3600)` -> `one every 15 minutes or every hour`."""
def one(s):
s = int(s)
if s == 3600:
return "every hour"
if s % 3600 == 0:
return f"every {s // 3600} hours"
if s % 60 == 0:
return f"every {s // 60} minutes"
return f"every {s} seconds"
return "one " + " or ".join(one(g) for g in gaps)
def _whole_hours(points) -> int:
@@ -1206,9 +1221,9 @@ def static_plan(opts: dict, since: datetime, until: datetime, *,
if profile is None:
return TariffPlan(
PriceRead.no_data(
"no static_profile configured; §11.4: plan provisional, no "
"arbitrage. Self-consumption, peak shaving and reserve "
"management are unaffected"),
"no fixed tariff is set, so the plan is estimated and there "
"is no trading. Self-consumption, peak limiting and the "
"reserve are not affected"),
None, "none")
points = profile.series(since, until, provisional=provisional)
return TariffPlan(
@@ -1338,16 +1353,18 @@ def _degrade(opts, read, since, until, stamp) -> TariffPlan:
try:
profile = parse_static_profile(price_option(opts, "static_profile"))
except ProfileInvalid as e:
_LOG.warning("the price feed is down AND static_profile is unusable "
"(%s), so there is no tariff at all", e)
_LOG.warning("The price feed is down and the fixed tariff "
"(static_profile) cannot be used either (%s), so there is "
"no tariff at all.", e)
profile = None
if profile is None:
_LOG.warning("%s, and no static_profile is set to fall back to, so "
"prices are provisional and trading is off. Peak "
"limiting and home use go on.", read.reason)
_LOG.warning("The price feed failed: %s. No fixed tariff is set to "
"fall back to, so trading is off. Peak limiting and home "
"use go on.", read.reason)
return TariffPlan(read, None, "none")
_LOG.warning("%s, so the static_profile tariff is used instead, marked "
"provisional, and trading is off.", read.reason)
_LOG.warning("The price feed failed: %s. The fixed tariff is used "
"instead, marked as estimated, and trading is off.",
read.reason)
points = profile.series(since, until, provisional=True)
return TariffPlan(
PriceRead.series(points, profile.product, "static_profile", stamp),
+32 -22
View File
@@ -222,6 +222,8 @@ class MigrationReport:
self.misdirected = []
# Why nothing ran, when nothing ran. Empty means "already at schema".
self.skipped = ""
# The inverter list the moves were graded against, for `explain()`.
self.roster = []
@property
def ok(self) -> bool:
@@ -237,19 +239,27 @@ class MigrationReport:
# the flat keys ARE its namespace - and an operator reading the
# startup log needs to be told which, because only one of them
# changes when a second inverter is declared.
return self.skipped or (f"store already at schema "
f"{self.from_version}; no "
f"per-inverter migration needed")
out = (f"migrated {len(self.moved)} flat key(s) to inverter "
f"namespaces: " + ", ".join(sorted(self.moved)))
return self.skipped or (f"the saved state is already at version "
f"{self.from_version}, so nothing moves")
# UX-10: plain sentences (test_messages.py part 6). Each problem is
# named by its key and what went wrong, and `problems`, `lost` and
# `misdirected` keep their full notes for the checks that read them.
n = len(self.moved)
out = (f"moved {n} saved {'value' if n == 1 else 'values'} to one part "
f"per inverter: " + ", ".join(sorted(self.moved)) if n
else "moved nothing")
if self.kept:
out += " (left alone, already namespaced: " + ", ".join(sorted(self.kept)) + ")"
if self.problems:
out += " - PROBLEMS: " + "; ".join(self.problems)
if self.lost:
out += " - STATE LOST: " + "; ".join(self.lost)
if self.misdirected:
out += " - WRONG NAMESPACE: " + "; ".join(self.misdirected)
out += ". Already in place: " + ", ".join(sorted(self.kept))
def keys(notes):
return ", ".join(note.split(" ", 1)[0] for note in notes)
other = [n for n in self.problems
if n not in self.lost and n not in self.misdirected]
parts = ([f"lost {keys(self.lost)}"] if self.lost else []) + (
[f"moved under an inverter not in the list {self.roster!r}: "
f"{keys(self.misdirected)}"] if self.misdirected else []) + (
[f"read back differently {keys(other)}"] if other else [])
if parts:
out += ". Problems: " + ", and ".join(parts)
return out
@@ -436,6 +446,7 @@ def _verify_moves(store, rep: MigrationReport, roster=None) -> None:
if roster is None:
return
names = [str(n) for n in roster]
rep.roster = names
# `unit_key()` builds `unit/<unit>/<key>`, so the unit is field 1. Split
# through the same spelling the writer used rather than re-deriving it.
#
@@ -469,8 +480,8 @@ def _verify_moves(store, rep: MigrationReport, roster=None) -> None:
if unit in names:
continue
rep.verified = False
note = (f"{target} was migrated into namespace {unit!r}, which is NOT "
f"on the roster {names!r} - nothing reads that key")
note = (f"{target} was moved under {unit!r}, which is not in the "
f"inverter list {names!r}, so nothing reads it")
rep.problems.append(note)
rep.misdirected.append(note)
@@ -536,14 +547,13 @@ def migrate_maint_keys(store, unit: str, roster) -> MigrationReport:
names = [str(n) for n in roster]
rep.from_version = int(data.get(MAINT_SCHEMA_KEY, 0) or 0)
if len(names) <= 1:
rep.skipped = ("one inverter: the flat maintenance keys ARE that pack's "
"history and are read in place, so there is nothing to "
"move and the store layout does not change")
rep.skipped = ("one inverter, so its maintenance history is read "
"where it is and nothing moves")
return rep
if rep.from_version >= MAINT_SCHEMA_VERSION:
rep.skipped = (f"maintenance history already at schema "
f"{rep.from_version}; written by a multi-inverter "
f"version and not touched")
rep.skipped = (f"maintenance history already at version "
f"{rep.from_version}, written for several inverters, so "
f"it is left as it is")
return rep
rep.ran = True
@@ -567,8 +577,8 @@ def migrate_maint_keys(store, unit: str, roster) -> MigrationReport:
# the re-run a no-op where the keys did land, so refusing the marker
# costs one repeated pass and buys the difference between a migration
# that can still be fixed and one the store says already happened.
_LOG.error("per-pack maintenance-history migration did NOT land and "
"has not been marked done: %s", rep.explain())
_LOG.error("Moving the maintenance history to one part per inverter "
"did not work, so it is not marked done: %s", rep.explain())
return rep
+22 -13
View File
@@ -114,6 +114,8 @@ import sqlite3
from dataclasses import dataclass
from datetime import datetime, timedelta, timezone, tzinfo
from . import messages
_LOG = logging.getLogger("goodwe.tariff")
QUARTER_S = 900
@@ -339,8 +341,8 @@ class PeakStore:
# INFO, not ERROR: on a dev host or in a test container there is no
# /data and nothing is wrong. A store that OPENED and then broke is
# the error case, and it is logged as one below.
_LOG.info("no peak store: %s - the monthly peak will read "
"NOT_OBSERVED", self.last_error)
_LOG.info("No peak store (%s), so the month peak cannot be read "
"and only the peak limit is used.", self.last_error)
return
try:
self._db = sqlite3.connect(self.path, timeout=5.0,
@@ -360,8 +362,9 @@ class PeakStore:
# fault must not stop a controller that is regulating a battery. The
# cost of continuing is a peak that reads NOT_OBSERVED, and every
# reader is built to treat that as "do not use me", not as 0 W.
_LOG.error("peak store unusable at %s (%s) - the monthly peak will "
"read NOT_OBSERVED, which is not a zero peak", self.path, err)
_LOG.error("The peak store at %s cannot be used (%s), so only the "
"peak limit is used. The month peak is unknown, not "
"zero.", self.path, err)
def close(self) -> None:
if self._db is not None:
@@ -672,12 +675,12 @@ class PeakTracker:
now = now or datetime.now(timezone.utc)
snap = self.store.load_partial()
if not snap:
self.restore_state = ("fresh: no checkpoint" if self.store.ok
else "fresh: store unreadable")
self.restore_state = ("fresh start, nothing saved" if self.store.ok
else "fresh start, the store cannot be read")
return self.restore_state
block = snap.get("block")
if block is None:
self.restore_state = "fresh: checkpoint had no open block"
self.restore_state = "fresh start, no open 15-minute period saved"
return self.restore_state
current = int(now.timestamp() // QUARTER_S) * QUARTER_S
@@ -686,11 +689,13 @@ class PeakTracker:
# A reshaped accumulator (meter_phases changed) is a different
# measurement, not a resumable one. Say so; do not half-resume.
self.store.clear_partial()
self.restore_state = "fresh: checkpoint does not fit this averager"
self.restore_state = ("fresh start, the saved period does not "
"fit the number of phases")
return self.restore_state
self.restore_state = (
f"resumed the open block at {snap.get('elapsed', 0.0):.0f} s "
f"of {QUARTER_S} s ({snap.get('acc', 0.0) / QUARTER_S:.0f} W banked)")
f"resumed the open 15-minute period at "
f"{snap.get('elapsed', 0.0):.0f} s of {QUARTER_S} s, with "
f"{snap.get('acc', 0.0) / QUARTER_S:.0f} W counted so far")
return self.restore_state
# The block ended while the add-on was down. Its measured part really
@@ -704,10 +709,14 @@ class PeakTracker:
if snap.get("pp_acc") and snap.get("last_pp") else None))
banked = self.store.record_block(closed, self.policy)
self.store.clear_partial()
# UX-10: plain words and the local time, not ISO and "banked".
self.restore_state = (
f"closed a stale block from {closed.start.isoformat()} at "
f"{closed.offtake_avg_w:.0f} W (partial coverage), "
+ ("banked" if banked else "NOT banked - store unwritable"))
f"closed the 15-minute period from "
f"{messages.when(closed.start.astimezone(BILLING_TZ))} at "
f"{closed.offtake_avg_w:.0f} W, partly measured, "
+ ("and saved it" if banked
else "but could not save it, because the store cannot be "
"written"))
return self.restore_state
# -- steady state -------------------------------------------------------
+32 -9
View File
@@ -343,6 +343,30 @@ from .watchdog import SIGN_OPTION_DEFAULTS
_LOG = logging.getLogger("goodwe.config")
class _WarnOnce(logging.Filter):
"""UX-10: a settings warning is said once per start. The validator runs
twice at start (before the first cycle and again once the inverter's range
is known), and a warning about options that have not changed is the same
news both times. Refusals are ERROR and pass untouched."""
def __init__(self):
super().__init__()
self.seen = set()
def filter(self, record):
if record.levelno != logging.WARNING:
return True
text = record.getMessage()
if text in self.seen:
return False
self.seen.add(text)
return True
WARN_ONCE = _WarnOnce()
_LOG.addFilter(WARN_ONCE)
# ⚠️ A MIRROR OF A FIRMWARE CONSTANT, AND IT CANNOT BE IMPORTED. The firmware
# threshold is a compile-time YAML substitution baked into the ESP32 image
# (`max_age_s: "30"`, master/goodwe-master-stage4-failsafe.yaml), so nothing at
@@ -1314,12 +1338,11 @@ def _price_problems(opts: dict) -> list[str]:
if profile is not None and profile.product is not None \
and len(set(profile.prices)) == 1:
_LOG.info(
"static_profile carries one distinct price (%.4f EUR/kWh "
"all-in), so this site is priced as FULLY FIXED. Arbitrage is "
"off by arithmetic - a flat series has no spread - and the "
"add-on runs self-consumption only, which is §9.2's handling "
"for this product. Peak shaving, reserve management and the "
"maintenance cycle are unaffected.", profile.prices[0])
"static_profile has one price (%.4f EUR/kWh all-in), so this "
"site has a fully fixed price. A flat price has no spread to "
"trade on, so the add-on uses the battery for self-consumption "
"only. Peak limiting, the reserve and battery maintenance are "
"not affected.", profile.prices[0])
# ⚠️ TARIFF-17: THE TAXES PERIOD TABLE, PARSED AT STARTUP RATHER THAN AT
# 03:00, FOR `static_profile`'s REASON ONE OPTION OVER. This table is read
@@ -1505,9 +1528,9 @@ def _price_problems(opts: dict) -> list[str]:
_LOG.info(
"%s is set: injection priced as (%g x index %+g) x "
"(1 + %g/100) %s, i.e. %.4g x the wholesale price with a "
"%+.5f EUR/kWh offset. ⚠️ NO STRATEGY IN THIS ADD-ON READS "
"IT: arbitrage.py prices the sell side as displaced IMPORT "
"and compares two all-in CONSUMPTION prices, so this option "
"%+.5f EUR/kWh offset. No part of the add-on reads it yet: "
"trading prices the sell side as displaced import and "
"compares two all-in consumption prices, so this setting "
"changes no decision the add-on takes today. It is what you "
"are shown, and the shape a future export-aware strategy "
"would read.",
+9 -1
View File
@@ -304,8 +304,16 @@ def build_app(controller, selfcfg=None) -> web.Application:
return app
def access_log():
"""UX-10: the page polls /status every few seconds, and aiohttp logs each
request at INFO. That access log is kept for a DEBUG log level only."""
return (logging.getLogger("aiohttp.access")
if _LOG.isEnabledFor(logging.DEBUG) else None)
async def start(controller, port: int = 8099, selfcfg=None):
runner = web.AppRunner(build_app(controller, selfcfg))
runner = web.AppRunner(build_app(controller, selfcfg),
access_log=access_log())
await runner.setup()
site = web.TCPSite(runner, "0.0.0.0", port)
await site.start()