goodwe-addon/goodwe_controller/config.yaml

name: GoodWe RS485 Controller
version: "0.5.2"
slug: goodwe_controller
description: >-
  Drives a GoodWe ES/BP battery inverter over RS485 by emulating its smart
  meter, holding net grid exchange at zero and running a monthly battery
  maintenance cycle.
url: https://gittea.kammenstraatha.duckdns.org/admin/goodwe-addon
arch:
  - aarch64
  - amd64
  - armv7
init: false
startup: application
boot: auto

# Needed to read the meter and to write the ESPHome setpoint number.
homeassistant_api: true
hassio_api: true

# Own diagnostics/operations UI inside HA. This is what a field tech and a
# remote supporter both look at, so it is not optional.
ingress: true
ingress_port: 8099
panel_icon: mdi:battery-sync
panel_title: GoodWe

# Optional: publish status entities by MQTT discovery. `want` rather than
# `need` - the add-on runs fine with no broker, it just publishes nothing.
services:
  - mqtt:want

options:
  # --- sources (required) ---------------------------------------------------
  meter_entity: sensor.p1_meter_active_power
  meter_invert: false
  soc_entity: ""
  batt_entity: ""
  batt_invert: false
  setpoint_entity: ""

  # --- P1 meter ingestion (specs §5.2 / §14 `meter:`) -------------------------
  # `off` keeps the original single meter_entity path above, so an existing
  # install is untouched until it opts in. ha_dsmr subscribes to the DSMR
  # integration's entities over the HA WebSocket; mqtt_p1 reads the topic below;
  # ha_signed reads ONE signed HA entity (+ import / - export), which is what a
  # HomeWizard P1 publishes and what ha_dsmr cannot consume.
  # homewizard_local skips Home Assistant entirely and polls the meter's own
  # local API. ⚠️ It is the ONLY mode whose sensor.p1_sample_age_s measures when
  # the meter REPORTED rather than when the value last CHANGED - HA emits
  # nothing at all for a repeated reading - so it is the only mode a firmware
  # watchdog may threshold. See DOCS.md.
  meter_source: "off"
  meter_phases: 1
  meter_max_age_s: 30
  meter_mqtt_topic: ""
  # homewizard_local only. The meter's own address, `host` or `host:port`.
  p1_host: ""
  # homewizard_local only. Seconds between polls. Must be well under
  # meter_max_age_s - the age is never fresher than this interval - and there is
  # nothing to gain below the meter's own ~5.0 s update rate (NOTES.md:640).
  meter_poll_s: 5
  # The two UNSIGNED Belgian registers. The EMS derives net power from them
  # (import - export); do NOT point these at a signed template sensor.
  p1_import_entity: ""
  p1_export_entity: ""
  # Optional, in L1..L3 order. Required for the capacity-tariff peak on a
  # three-phase connection; the list length must equal meter_phases.
  p1_phase_import_entities: []
  p1_phase_export_entities: []
  # ha_signed only. ONE signed net-power sensor: positive = import from the
  # grid, negative = export to it. Do NOT split it into two template sensors -
  # the split is done in the add-on (p1.split_signed) precisely so the sign
  # convention is tested rather than living in unreviewed YAML.
  p1_net_entity: ""
  # Optional, in L1..L3 order, each one signed the same way. Same role as
  # p1_phase_import_entities: the capacity-tariff peak on a three-phase
  # connection. The list length must equal meter_phases.
  p1_phase_net_entities: []

  # --- control ---------------------------------------------------------------
  max_w: 2000
  gain: 0.6
  slew_w: 1000
  deadband_w: 15
  target_grid_w: -10
  step_w: 10
  saturation_w: 500
  saturation_cycles: 3
  integrator_max_w: 0
  heartbeat_s: 10
  stale_input_s: 15
  cycle_floor_s: 15
  auto_start: false

  # --- SAFETY-02 sign-disagreement watchdog ----------------------------------
  # Trips when the emitted setpoint and the P1 net figure point OPPOSITE ways,
  # both over sign_disagree_w, continuously for sign_disagree_s. Action: 0 W and
  # a failsafe that latches until an operator starts control again.
  #
  # Both defaults are measured, not chosen. On the captured healthy day
  # (2026-08-23) the longest legitimate opposed run - a load step the loop has
  # not caught up with - is 30 s, and sign agreement over the gated samples is
  # 93.4 %. On the captured fault day (2026-08-20) the clusters run 0.0-10.5 %
  # agreement with opposed runs up to 1752 s. 300 W / 180 s sits in the middle of
  # a very wide gap: at 60 s the healthy day still trips nothing, at 300 s the
  # fault day still trips 13 times. There is no reason to move either number
  # without a capture that says so. They are options because the AC says
  # thresholds are defaults rather than constants - not because they are knobs
  # anyone is expected to turn.
  #
  # ⚠️ sign_disagree_w must stay BELOW max_w or the watchdog can never fire (the
  # arbiter bounds the command to +-max_w). validate.py refuses that config.
  sign_disagree_w: 300
  sign_disagree_s: 180

  # --- SAFETY-18 frozen-but-fresh meter detector -----------------------------
  # Seconds the meter may keep answering with an UNCHANGED measurement while the
  # command stands at the rail before the add-on raises an alarm. Both halves
  # are required: neither one alone is safe, and app/freeze.py carries why.
  #
  # ALARM ONLY. It does not command 0 W and does not latch. A false trip parks
  # the battery; a false notification costs an alert.
  #
  # ⚠️ Only `meter_source: homewizard_local` can see this at all - it is the
  # only transport that reads the meter's own document. On every other source
  # the status page says NOT COVERED rather than "armed".
  #
  # 300 s is measured, not chosen. Over 2399 s of the live house at the
  # converged operating point (sim/scenarios/p1-age-2026-08-26.jsonl.gz, mean
  # grid -14.2 W, 1194 polls, 735 of them repeating the previous reading) the
  # LONGEST run without a distinct reading is 15.4 s (the largest unchanged_s any
  # sample observes is 8.0 s). 300 s is 19.5x the pessimistic figure, and
  # still inside the 900 s quarter that bills the capacity tariff.
  meter_freeze_s: 300

  # --- maintenance -----------------------------------------------------------
  maintenance_enabled: false
  maintenance_interval_days: 28
  maintenance_start_hour: 10
  # ⚠️ BOTH MUST STAY AT OR BELOW max_w, and that is why they are 2000 rather
  # than the 2500 they shipped as. The cheap-window charge shaping asks the
  # arbiter for `hi = -maintenance_charge_w` against the supervised `lo =
  # -max_w`: above the ceiling that is `lo > hi`, a contradiction resolved to
  # 0 W, so maintenance would SILENTLY NEVER CHARGE in a cheap window on a
  # default install. validate.py refuses that config (rule 6), so these
  # defaults had to become self-consistent with the max_w above rather than
  # ship a configuration the validator rejects.
  #
  # The discharge side is clamped rather than contradicted - it drains at max_w
  # and the arbiter says so - so it is only warned about; it is 2000 here for
  # symmetry and to keep the shipped config warning-free.
  #
  # Raising max_w (the live reference install runs 5000) is what unlocks a
  # faster maintenance cycle. Raise max_w FIRST, then these.
  maintenance_discharge_w: 2000
  maintenance_charge_w: 2000
  maintenance_soc_floor: 11
  maintenance_soc_target: 99
  maintenance_hold_min: 120

  # --- tariff / capacity tariff (all optional) ------------------------------
  peak_forecast_entity: ""
  peak_cap_w: 3500

  # ⚠️ THE OLD PRICE PATH, AND IT IS NOT DEAD YET. These two entities are the
  # add-on delegating the whole price question to Home Assistant: main.py reads
  # both and derives ONE BOOLEAN, `cheap = now <= avg`, which is consumed by
  # nothing except the maintenance cycle's cheap-window charge floor. That is
  # all they have ever done. They are kept, because retiring them would take
  # the maintenance cycle's only price signal away on a live install before
  # anything replaces it - TARIFF-03 (static profile) and OPT-04 (arbitrage)
  # are the cards that replace it, and neither has landed.
  #
  # ⚠️ They may NOT be combined with price_provider below. Two price sources on
  # one site, one of which silently wins, is exactly the "double up" the PM
  # named; validate.py rule 7 refuses that configuration at startup rather than
  # letting an operator believe the provider they configured is driving
  # something. See app/validate.py.
  price_now_entity: ""
  price_avg_entity: ""

  # --- price providers (TARIFF-02, specs §9.3 / §14 `tariffs:`) --------------
  # `off` is the shipped default and means the §11.4 no-price-data row applies:
  # static profile, plan provisional, NO ARBITRAGE. Nothing in 0.5.x consumes
  # the series yet - OPT-04 is the consumer - so turning this on today fetches,
  # validates and publishes prices and changes no energy decision.
  #
  # ⚠️ THESE DEFAULTS ARE MIRRORED ONCE, IN app/price.py's
  # PRICE_OPTION_DEFAULTS, and test_price.py reads THIS FILE and asserts the two
  # agree key for key. Do not add a third copy in main.py - CFG-03 is open
  # because that has already happened three times.
  #
  # markup/taxes are the §14 `tariffs.energy_price.*` figures and are added by
  # the FRAMEWORK, only for the components the chosen plugin declares its feed
  # does not already contain. engie_dynamic, totalenergies_dynamic, eneco_eddy
  # and manual_csv publish a figure that already carries the markup, so setting
  # it under those is ignored - and logged as ignored, never applied twice.
  price_provider: "off"
  price_markup_eur_kwh: 0.03
  price_taxes_eur_kwh: 0.06
  price_csv_path: "/share/goodwe_prices.csv"
  price_feed_url: ""
  price_horizon_h: 48
  price_timeout_s: 10

  # §9.3: injection is priced SEPARATELY, and in Belgium it is often near zero -
  # which by itself strongly favours self-consumption over export. A scalar, not
  # a second series: no shipped supplier publishes a dynamic injection curve.
  export_price_eur_kwh: 0.04

  # --- site ------------------------------------------------------------------
  estop_fitted: false
  log_level: info

schema:
  meter_entity: str
  meter_invert: bool
  soc_entity: str
  batt_entity: str
  batt_invert: bool
  setpoint_entity: str

  meter_source: list(off|ha_dsmr|mqtt_p1|ha_signed|homewizard_local)
  # ⚠️ 2 is accepted by this range but is not a real Belgian connection. A
  # telegram whose phase count disagrees is rejected at ingest and logged, so a
  # mis-set 2 shows up immediately as "0 telegrams accepted" rather than as a
  # quietly wrong number.
  meter_phases: int(1,3)
  meter_max_age_s: int(5,300)
  meter_poll_s: int(1,60)
  meter_mqtt_topic: str?
  p1_host: str?
  p1_import_entity: str?
  p1_export_entity: str?
  p1_phase_import_entities:
    - str
  p1_phase_export_entities:
    - str
  p1_net_entity: str?
  p1_phase_net_entities:
    - str

  max_w: int(100,5000)
  gain: float(0.05,1.0)
  slew_w: int(50,5000)
  deadband_w: int(0,500)
  target_grid_w: float(-200,200)
  step_w: int(1,100)
  saturation_w: int(100,2000)
  saturation_cycles: int(1,10)
  integrator_max_w: int(0,15000)
  heartbeat_s: int(2,25)
  stale_input_s: int(5,120)
  cycle_floor_s: int(5,60)
  auto_start: bool

  # No "off" value, deliberately: this is a P0 safety check and the schema is
  # not the place to make disarming it a supported configuration.
  sign_disagree_w: int(50,5000)
  sign_disagree_s: int(30,1800)

  # No "off" value, for SAFETY-02's reason: disarming a safety alarm is not a
  # supported configuration. ⚠️ THE FLOOR OF 60 IS NOT A RECOMMENDATION. At 300 s
  # the slowest a HEALTHY meter's 1 Wh register can tick and still look unchanged
  # is 12 W, which is inside the 15 W deadband, so the two terms of the
  # conjunction are mutually exclusive rather than merely far apart. At 60 s that
  # figure is 60 W and the argument is gone - only the margin is left. See
  # app/freeze.py.
  meter_freeze_s: int(60,3600)

  maintenance_enabled: bool
  maintenance_interval_days: int(1,90)
  maintenance_start_hour: int(0,23)
  maintenance_discharge_w: int(500,5000)
  maintenance_charge_w: int(500,5000)
  maintenance_soc_floor: int(5,30)
  maintenance_soc_target: int(50,100)
  maintenance_hold_min: int(5,480)

  peak_forecast_entity: str?
  peak_cap_w: int(500,15000)
  price_now_entity: str?
  price_avg_entity: str?

  # ⚠️ The provider list is written out rather than left as `str`, so the
  # Supervisor rejects a typo in the UI. validate.py ALSO refuses an unknown id
  # against app/price.py's PROVIDERS registry, because sim/inject.py and the
  # checks reach validate_startup_config() with a dict the Supervisor never saw.
  # Adding a sixth plugin means adding it here and to PROVIDERS - and nowhere
  # else, which is AC2.
  price_provider: list(off|generic_dayahead|engie_dynamic|totalenergies_dynamic|eneco_eddy|manual_csv)
  price_markup_eur_kwh: float(0,1)
  price_taxes_eur_kwh: float(0,1)
  price_csv_path: str?
  price_feed_url: str?
  price_horizon_h: int(1,72)
  price_timeout_s: int(2,60)
  # ⚠️ The lower bound is NEGATIVE on purpose. Belgian injection tariffs have
  # gone below zero (you pay to export at midday in summer), and a schema that
  # bottoms out at 0 would make that site inexpressible.
  export_price_eur_kwh: float(-1,1)

  estop_fitted: bool
  log_level: list(trace|debug|info|warning|error)