Files
goodwe-addon/goodwe_controller/MUTATION.md
T
glenn schrooyenandClaude Opus 5 7b4877d56d
checks / unit (pull_request) Successful in 3m35s
TEST-15: purge the bytecode cache before a mutation run, not after
FCST-03's developer reverted `self.provisional` to `here.provisional`, re-ran,
and reported the mutation as a survivor. It was not one. CPython validates a
cached `.pyc` on (source size, source mtime truncated to whole seconds), and
that edit moved neither number - same length, same second - so the interpreter
loaded the bytecode it already had. Disassembly settled it at the time: the
source read `here`, the running code loaded `self`. A mutation run had graded
code that was not there, with no error and exit status 0.

This does not make the results already on the record wrong. It makes them
UNVERIFIED, and that distinction is the whole card - so nothing here re-runs a
campaign and nothing here quietly assumes the old numbers hold.

REPRODUCED, THEN CLOSED. test_bytecode.py builds a real package whose two
return values are the same length, imports it in a real subprocess, rewrites it
inside the same second (retrying until both writes land in one whole second -
milliseconds, no sleep) and reads back which value ran. Part 1 shows the
interpreter running SELF off a file that says HERE.

AND THE TWO OBVIOUS MITIGATIONS DO NOT WORK. Measured, not read off
documentation: `python3 -B` and PYTHONDONTWRITEBYTECODE=1 are write-side only.
Neither stops an EXISTING stale .pyc being read, and a mutation run always has
one, because the previous run wrote it. Part 2 grades both still running the old
code. The advice in test_control.py's coverage audit led with `-B`; it is
corrected here - the purge is the half that works, and `-B` earns its place by
keeping THIS run from leaving a cache for the NEXT edit to inherit.

NO SLEEP ANYWHERE. One-second mtime resolution is the mechanism, not the enemy.
Waiting it out would slow every run down and would still only cover the edit
somebody remembered to slow down.

THE HARNESS. tools/mutation_run.sh purges, prints a sha256/byte fingerprint of
every app/*.py it is about to grade - so a mutation report can say WHICH source
produced it, which is the reviewer's addition to this card - runs each suite
under `python3 -B`, refuses a tree with no test_*.py (CI-01's rule, for CI-01's
reason), and fails if a cache appears during the run. It takes the tree as an
argument so the infra repo's replay harnesses can call it without being moved.

WHERE IT IS SAID (AC 2). MUTATION.md carries the mechanism, the measurement,
the reporting rules and the survey, and every one of the 16 suites now points at
it from its docstring. That list is DERIVED FROM THE TREE by test_bytecode.py
part 5, so a new suite that joins this directory without the pointer is red -
the same failure shape CI-01's file glob exists to prevent.

CI WAS ALREADY IMMUNE, AND IS DESCRIBED THAT WAY (AC 4). Verified rather than
reasoned: with the checkout bind mounted `-v "$WS:/w:ro"` the interpreter writes
no __pycache__ into the tree at all, and it fails SILENTLY - no error, exit
status 0 - while the same probe on a writable mount produces one. Each job also
rm -rf's its workspace and clones afresh, so nothing crosses between jobs on the
shared runner. PYTHONDONTWRITEBYTECODE=1 is added as belt and braces only: the
`:ro` is one character wide and the next person debugging a write will be
tempted by it. Part 6 grades both ON THE DOCKER COMMAND LINE rather than on the
file - the first draft searched the whole workflow and stayed green after the
flag was deleted, because the comment explaining it still named it.

THE SHIPPED ADD-ON IS NOT AFFECTED and the question is closed:
goodwe_controller/Dockerfile has set PYTHONDONTWRITEBYTECODE=1 since it was
written. There is no deploy-side finding.

THE SURVEY (AC 3), in MUTATION.md, scoped BY THE PROPERTY. The defect is
one-directional - a mutation that never took leaves the suite green, so stale
bytecode manufactures SURVIVORS and cannot manufacture a red - which puts every
"all red, no survivors" claim in the window out of scope, along with mutations
executed in-process (SAFETY-07's B1/B2/B3, test_peakguard parts 7 and 10, where
no source file is edited) and everything run after the purge discipline landed
on 2026-08-31 (SAFETY-24, SAFETY-26, OPT-04, FCST-03's re-run). What is left is
the recorded SURVIVORS from source-edit runs before that date. Two were re-run
here under the harness and both still stand: TARIFF-01's record_block() ignoring
its policy argument, and SAFETY-03's abs() on the clamp limit - 15 suites green
each, on the tree as it stood. The rest are labelled still-unverified rather
than assumed or re-run; each is one harness run to close, and the moment to
spend it is when somebody next touches that module.

OUT OF SCOPE AND RECORDED: the infra repo's sim/ replay harnesses import the
add-on and write bytecode into both trees (goodwe/sim/__pycache__ exists today),
so SAFETY-02's headline replay carries the same exposure. mutation_run.sh takes
a tree argument for exactly that, but the change belongs in that repo and some
of those harnesses want the rig.

RED AND GREEN. Every new check was broken and watched fail: the purge commented
out of the harness turns part 4 red (and its non-vacuity probe already proves
the fixture would mis-grade without it); one docstring pointer removed turns
part 5 red naming the file; `:ro` and the `-e` flag removed from the workflow
turn part 6 red. Full suite green, 16 files, in the CI image on a read-only
mount - the shape the runner uses.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-01 02:07:09 +02:00

9.9 KiB

Mutation runs in this repository — and the one way they lie

Nearly every safety claim in this add-on was established the same way: change the shipped module, run the suites, watch one go red, put the module back, watch it go green. There is no coverage tool here and there is not meant to be — the check that matters is whether a check notices when the behaviour it names is removed.

That method has exactly one silent failure mode, and TEST-15 exists because we walked into it.

The defect

FCST-03's developer reverted self.provisional to here.provisional, re-ran, and reported the mutation as a survivor. It was not. CPython decides a cached .pyc is still valid from two numbers:

  • the source file's size in bytes, and
  • the source file's mtime truncated to whole seconds.

self and here are the same length, and the revert happened in the same second as the edit. Neither number moved, so the interpreter loaded the bytecode it already had. Confirmed at the time by disassembly: the source read here, the running code loaded self. The suite had graded code that was not there — no error, no warning, exit status 0.

The same collision, in the other direction, can leave a red standing on correct source after a revert that never took.

Which way it lies, and why that scopes everything

A mutation that never took effect leaves the suite green, and a green run of a mutated tree is reported as a survivor. So stale bytecode manufactures survivors; it cannot manufacture a red. The false-red case exists but announces itself, because a developer chases a failure they cannot explain.

Two consequences, and both are used below:

  • a recorded "all red, no survivors" result is not at risk from this defect;
  • a recorded survivor — and a recorded zero, such as a coverage-audit count of 0 — is exactly what this defect produces.

test_control.py's coverage-audit table says the same thing in its own terms: the error is one-directional, so every figure there is a lower bound at worst.

The rule

Purge __pycache__ before every mutation run. Not afterwards, not usually, not when the edit looks big enough.

cd goodwe_controller
tools/mutation_run.sh                     # every test_*.py in this directory
tools/mutation_run.sh . test_tariff.py    # or just the ones you are watching
tools/mutation_run.sh "$GOODWE_ADDON_REPO/goodwe_controller"   # from elsewhere

The harness purges, prints a sha256/byte-count fingerprint of every app/*.py it is about to grade, runs each suite under python3 -B, and fails if a cache appeared during the run. Diff two fingerprints and the file you mutated is the line that changed — which is also how a mutation report proves which source produced it.

What does not fix this

writes bytecode reads a stale .pyc
python3 -B no yes
PYTHONDONTWRITEBYTECODE=1 no yes
purging __pycache__ (unchanged) no — nothing to read

Both flags are write-side only. A mutation run always has a cache already, because the previous run wrote it, so a harness that only adds -B closes nothing. This is measured, not read off documentation: test_bytecode.py part 2 arranges the collision and shows both flags still running the old code.

-B is still worth passing — it stops this run leaving a cache for the next edit to inherit, which is the one nobody is thinking about three mutations into a batch. Purge for this run, -B for the next one.

And not a sleep

One-second mtime resolution is the mechanism, not the enemy. Waiting out the clock would slow every run down, and would still only cover the edit somebody remembered to slow down. Stop trusting mtime instead.

Reporting a mutation

State the things a reviewer cannot reconstruct afterwards:

  1. the byte delta of the mutated file (+5 B, +0 B). +0 B is the risky one — say so;
  2. that the mutated line was on disk when the run started (the harness fingerprint, or a grep of the line);
  3. which suite went red, and on which named check — "the suite is red" and "the check that watches this is red" are different claims;
  4. for a survivor, that the run was purged. An unpurged survivor is not a result.

Where each surface stands

  • Local and dev-harness runs — the exposed one. This is where FCST-03 hit it. goodwe_controller/__pycache__ and app/__pycache__ are gitignored and are sitting in most working trees right now. Use the harness.
  • CI — structurally immune, and it was before this card. .gitea/workflows/ checks.yml bind mounts the checkout -v "$WS:/w:ro", so the interpreter cannot write a __pycache__ into the tree under test at all; measured for TEST-15, and it fails silently — no error, exit status 0. Each job also rm -rfs its workspace and clones afresh, so nothing crosses between jobs on the shared runner. PYTHONDONTWRITEBYTECODE=1 is now set there too, as belt and braces: the :ro is one character wide and the next person debugging a write will be tempted by it.
  • The shipped add-on — not affected, and this is closed. goodwe_controller/Dockerfile has carried PYTHONDONTWRITEBYTECODE=1 since it was written. There is no deploy-side finding here; do not re-open it.
  • The infra repo's sim/ harnesses — exposed, and NOT fixed by this card. sim/replay_sign.py and friends import the add-on out of $GOODWE_ADDON_REPO and write __pycache__ into both trees (goodwe/sim/__pycache__ exists today). SAFETY-02's headline validation is a replay, not a suite, so a mutation graded through it carries the same exposure. tools/mutation_run.sh takes the tree to purge as its first argument precisely so that repo can call it, but the change belongs in that repo and some of those harnesses want the rig. Anyone mutating a module graded by a replay must purge both trees by hand until then.

Survey — mutation claims of 2026-08-25 … 2026-09-01

Scoped by the property, not by re-running everything. A claim is at risk only if a mutation could have preserved the file's byte count and been reverted inside the same second, and the claim is of the kind stale bytecode can fabricate (see "which way it lies"). Sources: git log release/1.0 and the commit and PR bodies.

claim verdict why
FCST-03 M9 self.provisional→here.provisional (dd40c56, 71cd784) re-verified this is the original false survivor. Re-run with the cache cleared, M9 is caught. The shipped source was correct throughout.
FCST-03 X1, X6 degenerate stimuli (71cd784) not at risk run after the purge discipline landed in that branch.
SAFETY-24 11 author + 9 reviewer mutations (e709554, 4601682) not at risk the commit records them run under python -B with a purged __pycache__ and real byte deltas. Its one survivor is an equivalent mutant, argued structurally rather than by a green run.
SAFETY-26 tolerance sweep over arbitrage.py and static_tariff.py, 2 survivors (2b8b8cb) not at risk purge, printed +5 B delta, mutated line asserted present, tree re-read before each run. One survivor is explicitly recorded at +0 B — the risky delta — and was produced under the purge.
OPT-04 mutations reported on PR #22 (bdd7f18) not at risk test_arbitrage.py's header records the exact command: purge, then python3 -B.
TEST-17 checks() dropping when (504e8da) not at risk a red claim, and dropping an argument changes the file length. Neither half of the collision is available.
SAFETY-07 wiring mutations B1/B2/B3 and test_peakguard.py parts 7 and 10 (2d570d8, e7c95bf) not at risk those mutations are executed in-process, monkeypatched onto the imported module. No source file is edited, so no .pyc is consulted.
every "all red, no survivors" claim in the window — TARIFF-02 (24/0), TARIFF-03 (11), MAINT-04 (10), SAFETY-18 (6+4), SAFETY-03 (6), TEL-04 (10), TEL-05 (6) not at risk direction. Stale bytecode turns a red into a green survivor, never the reverse. A red is evidence that something changed under the check.
TEST-06's deleted assertion, "no new notification while parked at 0 W" (c34b5a2) not at risk / superseded it was recorded as undecidable and then falsified — test_freeze.py records the one-line mutation that takes the file red 9 times. The stronger later claim is a red one.
TARIFF-01 reviewer survivor: record_block() ignoring its policy argument (0dbd485) re-verified — still a survivor re-run here through tools/mutation_run.sh against the 15 suites that were on the record, all green with billed_w(block, policy) mutated to billed_w(block, POLICY_NET). The recorded diagnosis holds: every block reaching the store is single-phase, where NET, SUM and MAX collapse.
SAFETY-03 reviewer survivor: abs() dropped from clamp_to_rating's limit (6aabb83) re-verified — still a survivor re-run the same way, all 15 green. Also as recorded: unreachable under the int(100, 5000) schema.
TARIFF-01's other three survivors, SAFETY-03's describe() survivor, TARIFF-02's M3/M5/M7, SAFETY-18's three still unverified recorded before the purge discipline, with no byte delta on the record, so a +0 B same-second revert cannot be excluded. All are survivors, which is the direction this defect fabricates. TARIFF-02's and SAFETY-18's were closed by later commits whose claims are reds, so what is unverified is the diagnosis, not the current state of the code.

Nothing here says a past result is wrong. The two survivors re-run above both stood. What changed is that they are now on the record as measured rather than assumed, and the rest are labelled honestly. The still-unverified rows are cheap to close — one harness run each — and the right moment is when somebody next touches that module, not in a re-run campaign nobody will read.