glenn schrooyenandClaude f0b4e68e49 SAFETY-118: read the peak forecast in its own unit ...

peak_forecast_entity is read through pv.watts() by its unit_of_measurement;
the abs(raw) < 50 size rule is gone. No unit or a non-power unit means the
forecast is not used, with one warning per cause. The validator no longer
claims a kW sensor is taken as watts for this entity.

Co-Authored-By: Claude <noreply@anthropic.com>

2026-10-16 16:00:34 +02:00

..

rehearsal

TEL-10: the loop's integrator stops being invisible

2026-09-18 23:36:23 +02:00

alloc_sim.py

OPT-11 P1: per-battery mode limits, on/off, solar order

2026-09-28 18:51:29 +02:00

decode_bus_capture.py

SAFETY-60/62: operator tools refuse input they cannot read

2026-09-24 23:27:50 +02:00

export_p1_history.py

DATA-01: thirty days of the real meter, and what AC 3 actually measures

2026-08-31 11:15:02 +02:00

mutation_run.sh

TEST-15: purge the bytecode cache before a mutation run, not after

2026-09-01 02:07:09 +02:00

opt11_identity.py

SAFETY-118: read the peak forecast in its own unit

2026-10-16 16:00:34 +02:00

opt11p3_identity.py

OPT-15: price-run fixes (quarter edge, charge-end overshoot, refusal probe)

2026-09-29 20:22:32 +02:00

opt11p3_replay.py

OPT-15: price-run fixes (quarter edge, charge-end overshoot, refusal probe)

2026-09-29 20:22:32 +02:00

opt11p4_identity.py

OPT-11 P4: solar forecast and day plan

2026-09-29 19:29:32 +02:00

opt11p4_replay.py

OPT-11 P4 review: Cheap hours ignores the plan; midnight-stale forecast; stricter ids

2026-09-29 22:08:47 +02:00

opt20_scen.py

OPT-20: a refusal probe asks only PROBE_W, not the whole trade

2026-10-15 13:08:59 +02:00

predeploy_check.py

SAFETY-60/62: operator tools refuse input they cannot read

2026-09-24 23:27:50 +02:00

rehearse_roster.py

SAFETY-62 review: DOCS exit 3 at the command block (R1); recognise the auto store key (R2)

2026-09-25 00:02:33 +02:00

replay_ac3.py

SAFETY-79: peak guard keeps a margin below the limit

2026-09-28 23:09:39 +02:00

replay_recorded_loop.py

SAFETY-48: the slew step ceiling reaches the integrator, and what it bounds is the LEAD

2026-09-19 02:36:28 +02:00

replay_refusal.py

SAFETY-52 review: a refusal is under 100 W, and any delivery ends it

2026-09-27 18:11:42 +02:00

safety56_behaviour_trace.py

SAFETY-56: the gate cannot tell a dead register from a pack that cannot comply, so stop saying it can

2026-09-23 21:02:40 +02:00

safety78_identity.py

SAFETY-83: peak guard outranks the maintenance drain at N=1

2026-09-29 22:40:14 +02:00

safety79_identity.py

SAFETY-79 review: margin under a banked month peak too; identity harness reaches headroom and maintenance

2026-09-29 00:49:16 +02:00

safety81_sim.py

Merge release/1.0 (e3e4ba6) into opt15-price-run-fixes

2026-10-13 12:15:44 +02:00

safety84_identity.py

SAFETY-84: maintenance charge at N=2 no longer stalls

2026-09-30 19:47:15 +02:00

safety87_identity.py

SAFETY-87: peak guard uses every battery that can still give

2026-10-01 09:29:30 +02:00

safety94_rig.py

SAFETY-97: "gives nothing" is graded against each battery's idle reading

2026-10-04 12:21:24 +02:00

safety103_plant.py

SAFETY-103: no swing on old battery readings after a drain ends

2026-10-08 02:25:55 +02:00

slew_sim.py

SAFETY-48: what the lead cap actually does to a frozen integrator, and what the peak figure depends on

2026-09-19 02:37:01 +02:00

style_rules.py

UX-13 P5: Dutch text, STYLE check, DOCS screenshots, period editor

2026-09-28 16:33:32 +02:00

supervisor_selfapi_probe.py

UX-02: the validator's refusals, next to the field, before the save

2026-09-06 21:38:31 +02:00

supervisor_shape_probe.py

OPT-17: the solar forecast can come from several entities, summed

2026-10-11 02:55:58 +02:00

symmetric_message_scan.py

SAFETY-38 round 4: the enumeration covered one sink, and it was not the one this codebase uses

2026-09-05 22:38:40 +02:00

tel11_pv_trace.py

TEL-12: several PV inverters, and one absent member is an absent TOTAL

2026-09-24 22:13:25 +02:00

translations_lint.py

UX-01: translate the add-on config, and order it by task

2026-09-05 12:02:56 +02:00

ux13_browser_check.py

UX-13 P3 review: truthful peak lines, a clock-proof test, Simple stays default

2026-09-28 23:20:33 +02:00

ux13_demo.py

PRICE-01 round 2: the token on no page, fixed-tariff note, token length, F3 words, test gaps

2026-10-14 18:56:51 +02:00

ux13_screenshots.py

UX-13 P3: Simple view and Batteries screen

2026-09-28 22:39:43 +02:00

ux13_screenshots.sh

UX-13 P3: Simple view and Batteries screen

2026-09-28 22:39:43 +02:00

ux13_validator_calls.py

UX-13 P0: layout table, page<->options derivation, warning tier, entity list

2026-09-27 23:11:31 +02:00

ux13_wizard_blobs.py

UX-13 P5: Dutch text, STYLE check, DOCS screenshots, period editor

2026-09-28 16:33:32 +02:00