glenn schrooyenandClaude Opus 5 d5b9317d57 SAFETY-38: correct the survivor count, which was stated four ways ...

Review found the summary lines miscounted, and one of the miscounts filed
a KILL among the survivors. The authoritative tables in §7e and §7f were
right throughout; only the sentences a reader actually relies on were
wrong.

Arithmetic, from §7f's own ledger:
  14 measured = 10 surviving
              +  1 already caught  (C3 allocator.py:162, red in test_alloc.py)
              +  3 caught by round 4 (C6 clamp.py:253, C7 peakguard.py:493,
                                      B12 arbiter.py:264)
Survivors by file: TWO in allocator.py (C1 :154, C2 :160), three in
arbiter.py (C4a/C4b :344, C5 :392), two in tariff.py (C8, C9), two in
arbitrage.py (B17, B18), one in main.py (B19). Two, not three, in
allocator.py - C3 is the kill.

Before: DECISIONS §6c said "Nine" while listing eleven; the CHANGELOG said
"11 SURVIVORS" while listing eleven. Both counted C3 as a survivor.

⚠️ KEPT VISIBLE RATHER THAN QUIETLY FIXED. This is this card's own
recurring defect in prose rather than in code - a claim wider than the
measurement beneath it - and it is the second false statement this ticket
has put into its own decision record. The correction says so at the line,
because a document whose whole value is that it can be trusted should
record when it could not be.

No app/ change; no test change. Full suite: 21 passed, 0 failed.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BwRLw7eKYj2byVdwB6kbjU

2026-09-05 23:10:30 +02:00

..

app

SAFETY-41: escalate a sustained engagement, so a runaway is never held

2026-09-05 18:13:09 +02:00

DECISIONS

SAFETY-38: correct the survivor count, which was stated four ways

2026-09-05 23:10:30 +02:00

scenarios

DATA-01: thirty days of the real meter, and what AC 3 actually measures

2026-08-31 11:15:02 +02:00

tools

SAFETY-38 round 4: the enumeration covered one sink, and it was not the one this codebase uses

2026-09-05 22:38:40 +02:00

translations

UX-01: translate the add-on config, and order it by task

2026-09-05 12:02:56 +02:00

build.yaml

Packaged as a Home Assistant add-on, with a field guide

2026-08-23 01:15:25 +02:00

CHANGELOG.md

SAFETY-38: correct the survivor count, which was stated four ways

2026-09-05 23:10:30 +02:00

config.yaml

PKG-06: bump 0.6.0 -> 0.7.0, because the schema changed and nobody bumped

2026-09-05 18:38:41 +02:00

Dockerfile

Six silent failures found by installing this on a live system

2026-08-23 02:25:58 +02:00

DOCS.md

TEL-07: a second MQTT device for inverter B, and A keeps the one it has

2026-09-05 14:14:53 +02:00

MUTATION.md

SAFETY-38 round 4: the enumeration covered one sink, and it was not the one this codebase uses

2026-09-05 22:38:40 +02:00

requirements.txt

Six silent failures found by installing this on a live system

2026-08-23 02:25:58 +02:00

run.sh

Six silent failures found by installing this on a live system

2026-08-23 02:25:58 +02:00

test_alloc.py

DEV-02: per-instance inverter objects, so nothing is graded against a sibling

2026-09-02 14:50:43 +02:00

test_arbiter.py

SAFETY-38 round 4: the enumeration covered one sink, and it was not the one this codebase uses

2026-09-05 22:38:40 +02:00

test_arbitrage.py

TEST-16: pin the two one-sided arbitrage rungs, and un-mask them from each other

2026-09-01 07:37:19 +02:00

test_bytecode.py

TEST-15: purge the bytecode cache before a mutation run, not after

2026-09-01 02:07:09 +02:00

test_ci_gate.py

CI-02: grade the merge, and stop a cancelled run reading as a test failure

2026-09-01 03:42:54 +02:00

test_clamp.py

SAFETY-38 round 4: the enumeration covered one sink, and it was not the one this codebase uses

2026-09-05 22:38:40 +02:00

test_control.py

TEST-15: purge the bytecode cache before a mutation run, not after

2026-09-01 02:07:09 +02:00

test_freeze.py

TEST-10: pin max_w beside the meter_freeze_s key TEST-06 already pinned

2026-09-01 06:48:05 +02:00

test_inverter.py

SAFETY-32: bms_soc_floor per pack, rule 8 per unit

2026-09-05 03:01:57 +02:00

test_loop.py

TEST-15: purge the bytecode cache before a mutation run, not after

2026-09-01 02:07:09 +02:00

test_maintenance.py

SPIKE-04a: inverter B is 4600 W FROM ITS DATASHEET, and the copies are pinned

2026-09-04 22:19:31 +02:00

test_mqtt.py

TEL-07: a second MQTT device for inverter B, and A keeps the one it has

2026-09-05 14:14:53 +02:00

test_p1.py

TEST-15: purge the bytecode cache before a mutation run, not after

2026-09-01 02:07:09 +02:00

test_peakguard.py

SAFETY-38 round 4: the enumeration covered one sink, and it was not the one this codebase uses

2026-09-05 22:38:40 +02:00

test_price_forecast.py

TEST-15: purge the bytecode cache before a mutation run, not after

2026-09-01 02:07:09 +02:00

test_price.py

TEST-15: purge the bytecode cache before a mutation run, not after

2026-09-01 02:07:09 +02:00

test_static_tariff.py

TEST-16: pin the two one-sided arbitrage rungs, and un-mask them from each other

2026-09-01 07:37:19 +02:00

test_tariff.py

CFG-04: an operator can declare a second inverter, and the shape was measured

2026-09-04 04:29:45 +02:00

test_translations.py

UX-01: translate the add-on config, and order it by task

2026-09-05 12:02:56 +02:00

test_validate.py

SAFETY-32 round 5: stop closing sites, build an instrument that finds its own scope

2026-09-05 05:36:16 +02:00

test_watchdog.py

SAFETY-38 round 3: pin the banner the SHIPPED install actually prints

2026-09-05 20:39:58 +02:00