adminandClaude Opus 5.5 138e45b53f SAFETY-103: no swing on old battery readings after a drain ends ...

While a battery settles from its ended drain (SAFETY-95), the house point
was grid + every battery's reading. A register can be 10 s older than the
meter, so B swung 860 -> 1650 -> 870 W on A's old reading (rig check 5).

Now the house point is held and moved only as far as the meter proves:
each battery is between its last changed reading and its commands since
(a reading that changed this cycle, or a refused side, as it reads).
N=1 and 1 s registers are byte-identical to release/1.0.

DECISIONS/SAFETY-103-old-readings-after-a-drain.md, test_safety103.py.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-08 02:25:55 +02:00

..

static

OPT-11 P4: solar forecast and day plan

2026-09-29 19:29:32 +02:00

ui_text

SAFETY-90: the peak guard goes on after a P1 meter gap

2026-10-05 11:46:58 +02:00

__init__.py

Packaged as a Home Assistant add-on, with a field guide

2026-08-23 01:15:25 +02:00

allocator.py

SAFETY-84: maintenance charge at N=2 no longer stalls

2026-09-30 19:47:15 +02:00

arbiter.py

SAFETY-91: a held battery is drawn only after the others are full

2026-10-02 14:03:54 +02:00

arbitrage.py

UX-08 2c: short refusals, error texts and option texts

2026-09-27 05:55:45 +02:00

circulation.py

UX-10 review: the line as logged gets the red-alarm shape, clamp lines at 30 words, plain HA 400

2026-09-27 12:08:38 +02:00

clamp.py

SAFETY-85 review: grade discharge only, over the plant's settle time

2026-10-01 20:25:41 +02:00

config_page.py

UX-08 2d: plain log lines, the rest of the status page, and DOCS

2026-09-27 08:01:16 +02:00

configui.py

UX-08 2d: plain log lines, the rest of the status page, and DOCS

2026-09-27 08:01:16 +02:00

control.py

SAFETY-97: "gives nothing" is graded against each battery's idle reading

2026-10-04 12:21:24 +02:00

custom_formula.py

UX-08 2d: plain log lines, the rest of the status page, and DOCS

2026-09-27 08:01:16 +02:00

dayplan.py

OPT-11 P4 review: Cheap hours ignores the plan; midnight-stale forecast; stricter ids

2026-09-29 22:08:47 +02:00

delivery.py

SAFETY-43 round 2: the cut-out "positive control" was vacuous, and the record

2026-09-08 04:15:07 +02:00

freeze.py

UX-10: the last plain-language leftovers: log lines, two table rows, 'Why: Other', red at 0 s

2026-09-27 10:58:43 +02:00

freshness.py

SAFETY-94: a healthy battery that lags or reverses is not flagged as frozen or refusing

2026-10-04 00:15:42 +02:00

haentities.py

UX-13 P4: the setup wizard for installers

2026-09-28 05:31:18 +02:00

hass.py

UX-15: setup-only mode, and the wizard fixes F1, F2, meter, step 1

2026-09-28 08:48:21 +02:00

homeview.py

Merge release/1.0 (0.15.0 + SAFETY-90) into maint-10-local-start-hour

2026-10-05 21:51:04 +02:00

idle.py

SAFETY-97: centre the band on the idle reading clamped to 75 W

2026-10-04 16:57:16 +02:00

inverter.py

SAFETY-97: "gives nothing" is graded against each battery's idle reading

2026-10-04 12:21:24 +02:00

main.py

SAFETY-103: no swing on old battery readings after a drain ends

2026-10-08 02:25:55 +02:00

maintenance.py

MAINT-10: maintenance start hour in local time, default 19:00

2026-09-29 22:52:05 +02:00

messages.py

SAFETY-90 review: count the start-up seconds like a gap

2026-10-05 12:24:33 +02:00

modetrade.py

Merge release/1.0 (SAFETY-78, #154) into opt11-p4-solar-forecast

2026-09-29 22:37:09 +02:00

mqtt.py

OPT-11 P3: price runs per battery

2026-09-29 02:37:44 +02:00

p1.py

SAFETY-90: the peak guard goes on after a P1 meter gap

2026-10-05 11:46:58 +02:00

packmode.py

OPT-11 P4 review: Cheap hours ignores the plan; midnight-stale forecast; stricter ids

2026-09-29 22:08:47 +02:00

packshare.py

SAFETY-43: delinquency measured against the ask, not against a flat 500 W

2026-09-08 03:14:16 +02:00

peakguard.py

SAFETY-90: the peak guard goes on after a P1 meter gap

2026-10-05 11:46:58 +02:00

price_forecast.py

UX-10 review: the line as logged gets the red-alarm shape, clamp lines at 30 words, plain HA 400

2026-09-27 12:08:38 +02:00

price_history.py

UX-10: the last plain-language leftovers: log lines, two table rows, 'Why: Other', red at 0 s

2026-09-27 10:58:43 +02:00

price.py

UX-10: the last plain-language leftovers: log lines, two table rows, 'Why: Other', red at 0 s

2026-09-27 10:58:43 +02:00

priceruns.py

OPT-11 P3: price runs per battery

2026-09-29 02:37:44 +02:00

pv.py

TEL-14: PV sign declared per entity (pv_invert_entities)

2026-09-25 00:25:24 +02:00

selfconfig.py

UX-13 P4: the setup wizard for installers

2026-09-28 05:31:18 +02:00

setuponly.py

UX-13 P5: Dutch text, STYLE check, DOCS screenshots, period editor

2026-09-28 16:33:32 +02:00

shadow.py

UX-08 2d: plain log lines, the rest of the status page, and DOCS

2026-09-27 08:01:16 +02:00

solarfc.py

OPT-11 P4 review: Cheap hours ignores the plan; midnight-stale forecast; stricter ids

2026-09-29 22:08:47 +02:00

static_tariff.py

UX-10 review: the line as logged gets the red-alarm shape, clamp lines at 30 words, plain HA 400

2026-09-27 12:08:38 +02:00

store.py

UX-15: setup-only mode, and the wizard fixes F1, F2, meter, step 1

2026-09-28 08:48:21 +02:00

tariff.py

SAFETY-91: a held battery is drawn only after the others are full

2026-10-02 14:03:54 +02:00

uilayout.py

OPT-11 P4: solar forecast and day plan

2026-09-29 19:29:32 +02:00

uimodel.py

UX-13 P5: Dutch text, STYLE check, DOCS screenshots, period editor

2026-09-28 16:33:32 +02:00

uipage.py

UX-13 P3: Simple view and Batteries screen

2026-09-28 22:39:43 +02:00

uitext.py

UX-13 P5: Dutch text, STYLE check, DOCS screenshots, period editor

2026-09-28 16:33:32 +02:00

validate.py

OPT-11 P4 review: Cheap hours ignores the plan; midnight-stale forecast; stricter ids

2026-09-29 22:08:47 +02:00

watchdog.py

UX-11: safety log lines give one plain sentence and the code, the figures go to DEBUG

2026-09-27 13:34:30 +02:00

web.py

OPT-11 P3: price runs per battery

2026-09-29 02:37:44 +02:00