SAFETY-119: no "not keeping up" when the loop takes the wire back #203
@@ -71,6 +71,13 @@ in the case above), so nothing more is claimed there. The cap held at 1 to
|
||||
meters the meter's lag puts quarters over it, the same with and without the
|
||||
fix (commands are identical).
|
||||
|
||||
**Limits.** These runs have one cycle per meter reading, at a steady
|
||||
interval. A 20 or 30 s cycle needs `cycle_floor_s` raised; at the default
|
||||
15 s, a slower meter adds cycles on an old reading. Measured that way (11
|
||||
seeds): a 15 s meter that varies by up to 30 % false-alarmed on 5 seeds, a
|
||||
30 s meter on 10 (0 to 4 in 2 h, 8 to 15 without the fix); a 20 s meter on
|
||||
none. The case above still warned every quarter there.
|
||||
|
||||
**Kept.** The loop in charge at its rail warns on the same cycle as before.
|
||||
The start and a restart after a stop are not hand-backs. The quarter-edge
|
||||
kick of `test_safety119.py` part 1 stays hidden (see above).
|
||||
|
||||
Reference in New Issue
Block a user