goodwe_controller/DECISIONS/SAFETY-118-peak-forecast-unit.md

@@ -0,0 +1,18 @@
+# SAFETY-118 - the peak forecast is read in its own unit
+
+**Status: for review.** Tests: `test_safety118.py`.
+
+`peak_forecast_entity` was read as a bare number, and anything under 50 was
+multiplied by 1000 ("accept kW or W"). A W sensor reading 17 to 45 W, which a
+real site did 430 times in one morning, was taken as 17 to 45 kW. The validator
+also called a kW sensor wrong, which was false for this entity.
+
+Decision: the size rule is gone. The entity is read through `pv.watts()`, the
+same unit table and reader as the solar entities, so W, kW, MW and the rest
+convert by the sensor's own `unit_of_measurement`. No unit, or a unit that is
+not power (kWh), means the forecast is not used, exactly as if the option were
+empty: the loop cap and every non-forecast peak step still apply. One WARNING
+per cause, and a status row and a settings note say the same.
+
+No size rule can be right in both units: 30 W and 30 kW are both ordinary.
+The read is still one `GET /api/states/<id>` per cycle, as `hass.number()` made.

goodwe_controller/DOCS.md

@@ -210,7 +210,7 @@ The label and description each setting shows on the Configuration tab, in tab or
 | Limits | Battery cut-out level (%) | `bms_soc_floor` | The level where the battery's own management system stops giving power. Read it off your battery rather than copying a figure. |
 | Limits | Peak limit (W) | `peak_cap_w` | Your own number: the 15-minute average power the add-on keeps the grid under. Take it from your grid contract. |
 | Limits | Margin below the peak limit (W) | `peak_margin_w` | The add-on aims this much below the peak limit, so a 15-minute period that ends a little high still stays under it. |
-| Limits | 15-minute demand forecast entity (W) | `peak_forecast_entity` | Optional. A forecast of this 15-minute period's average power. Leave it empty and there is no peak limit. |
+| Limits | 15-minute demand forecast entity (W) | `peak_forecast_entity` | Optional. A forecast of this 15-minute period's average power, in W or kW. With no power unit it is not used. Leave it empty and there is no peak limit. |
 | Limits | Peak reserve (%) | `peak_soc_floor` | Peak limiting will not draw the battery below this level, but ordinary use can. Derived value, leave it unchanged. |
 | Tariff | Dynamic price source | `price_provider` | Where prices come from. Choosing a source starts the price fetch, even with trading off. |
 | Tariff | Supplier markup (EUR/kWh) | `price_markup_eur_kwh` | Your supplier's margin. It is added only when the price source does not already include it. |
@@ -1697,7 +1697,7 @@ DECISIONS/MAINT-13-full-pack-is-complete.md.
 
 | option | meaning |
 |---|---|
-| `peak_forecast_entity` | Quarter-hour demand forecast, for capacity-tariff markets. Empty = no cap |
+| `peak_forecast_entity` | Quarter-hour demand forecast, for capacity-tariff markets. Read in its own unit (W, kW or any power unit). No unit, or a unit that is not power, means it is not used, as if empty (SAFETY-118). Empty = no cap |
 | `peak_cap_w` | The site's capacity-tariff target |
 | `peak_margin_w` (50) | Watts the peak guard aims under `peak_cap_w` (SAFETY-79). Reports and the bill use `peak_cap_w` itself |
 | `peak_soc_floor` (20) | **The percent below which the capacity-peak guard will not discharge the battery.** ⚠️ It bounds **the peak guard only** — it is **not a pack-wide reserve**, and ordinary self-consumption discharges straight past it (SAFETY-25, see below). Not optional and not the same thing as `maintenance_soc_floor` |

goodwe_controller/app/main.py

@@ -1202,6 +1202,9 @@ class Controller:
         # `grid` is P1, one meter, one connection, and belongs here.
         self.grid = None
         self.peak_fc = None
+        # SAFETY-118: the unit fault last logged for the peak forecast (None =
+        # no fault), so the warning comes once and again only if it changes.
+        self._peak_fc_fault = None
         self.cheap = False
         self._price_gated = False     # MAINT-13: is a price gate set up
         # PRICE-01. Which step of the price chain the prices come from (logged
@@ -3358,6 +3361,22 @@ class Controller:
         self.pv_w, self.pv_why, self.pv_parts = pv_read.total(
             list(zip(roster, states)), pv_read.inverted(self.o))
 
+    def _peak_fc_unit_log(self, fault) -> None:
+        """SAFETY-118. One WARNING when the peak forecast's unit cannot be read
+        in watts, and again only if the unit changes; the unit is on DEBUG."""
+        if fault == self._peak_fc_fault:
+            return
+        self._peak_fc_fault = fault
+        if fault is None:
+            _LOG.info("The 15-minute demand forecast is used again.")
+        elif fault == "":
+            _LOG.warning("The 15-minute demand forecast has no unit, so it "
+                         "is not used.")
+        else:
+            _LOG.warning("The 15-minute demand forecast is not in a power "
+                         "unit, so it is not used.")
+            _LOG.debug("The 15-minute demand forecast reads in %r.", fault)
+
     async def _read_forecast(self) -> None:
         """OPT-11 P4: the solar forecast sensors (`solarfc.read()`). A
         failed or stale read is no forecast, never a zero."""
@@ -3448,11 +3467,15 @@ class Controller:
             _reads.append(self._read_forecast())
         await asyncio.gather(*_reads)
         if o.get("peak_forecast_entity"):
-            raw = await self.hass.number(o["peak_forecast_entity"])
-            # Accept kW or W - nobody's quarter-hour forecast is 50 W.
-            self.peak_fc = None if raw is None else (raw * 1000 if abs(raw) < 50 else raw)
+            # SAFETY-118: read in its own unit, like the PV path. One state
+            # read, as `hass.number()` made. No unit or a unit that is not
+            # power: not used, as if the option were empty.
+            st = await self.hass.state(o["peak_forecast_entity"])
+            self.peak_fc, _why = pv_read.watts(st)
+            self._peak_fc_unit_log(pv_read.unit_fault(st))
         else:
             self.peak_fc = None
+            self._peak_fc_fault = None
 
         now_e, avg_e = o.get("price_now_entity"), o.get("price_avg_entity")
         if now_e and avg_e:
@@ -7240,6 +7263,10 @@ class Controller:
             # is both is a check nobody reads.
             out.append({"ok": False, "warn": True, "id": "peak_forecast",
                         "text": messages.row_no_peak_forecast()})
+        elif getattr(self, "_peak_fc_fault", None) is not None:
+            out.append({"ok": False, "warn": True, "id": "peak_forecast",
+                        "text": messages.row_peak_forecast_unit(
+                            self._peak_fc_fault)})
         # OPT-17: a forecast summed from several entities names, by position,
         # each member with no usable reading. A caution: control goes on.
         gaps = getattr(self, "solar_fc_gaps", ())

goodwe_controller/app/messages.py

@@ -788,6 +788,25 @@ def row_no_peak_forecast() -> str:
             "the peak limit")
 
 
+def peak_forecast_unit(unit, lang="en") -> str:
+    """SAFETY-118. The 15-minute demand forecast has a number but no power
+    unit, so it is not used. `unit` is "" for none. One sentence, for the log
+    line, the status row and the settings page. Log lines stay English."""
+    if lang == "nl":
+        return ("De kwartierprognose heeft geen eenheid, dus ze wordt niet "
+                "gebruikt." if not unit else
+                "De kwartierprognose heeft geen vermogenseenheid, dus ze "
+                "wordt niet gebruikt.")
+    return ("The 15-minute demand forecast has no unit, so it is not used."
+            if not unit else
+            "The 15-minute demand forecast is not in a power unit, so it is "
+            "not used.")
+
+
+def row_peak_forecast_unit(unit) -> str:
+    return peak_forecast_unit(unit)
+
+
 def row_peak_guard_waiting() -> str:
     return "Peak guard: no decision yet, control has not run"
 
@@ -1229,6 +1248,8 @@ def status_samples() -> list:
         ("row_no_estop", AMBER, row_no_estop()),
         ("row_estop_fitted", GREEN, row_estop_fitted()),
         ("row_no_peak_forecast", AMBER, row_no_peak_forecast()),
+        ("row_peak_forecast_unit", AMBER, row_peak_forecast_unit("")),
+        ("row_peak_forecast_unit", AMBER, row_peak_forecast_unit("kWh")),
         ("row_peak_guard_waiting", AMBER, row_peak_guard_waiting()),
         ("row_pv", GREEN, row_pv(3200, 2)),
         ("row_pv", GREEN, row_pv(1800, 1, True)),

goodwe_controller/app/pv.py

@@ -93,12 +93,12 @@ def watts(state: dict | None) -> tuple:
     unknown" are different claims and the page has to be able to make the first.
 
     ⚠️ THE UNIT IS READ OFF THE ENTITY AND NOT ASSUMED, AND THERE IS NO
-    MAGNITUDE HEURISTIC. `read_inputs()` guesses kW-or-W for
-    `peak_forecast_entity` with `abs(raw) < 50`, which is safe there because
-    nobody's quarter-hour demand forecast is 50 W. It is NOT safe here: 30 W of
-    real production at dusk is an ordinary reading, and that heuristic would
-    publish it as 30 kW - a fabricated number, in the channel whose entire
-    purpose is to be believed a week later. A sensor whose unit this cannot read
+    MAGNITUDE HEURISTIC. 30 W of real production at dusk is an ordinary reading,
+    and a "small number means kW" rule would publish it as 30 kW - a fabricated
+    number, in the channel whose entire purpose is to be believed a week later.
+    SAFETY-118 removed the last such rule, on `peak_forecast_entity`, for the
+    same reason (DECISIONS/SAFETY-118-peak-forecast-unit.md): the peak forecast
+    now reads through this function too. A sensor whose unit this cannot read
     is REFUSED rather than guessed at.
     """
     if state is None:
@@ -126,6 +126,24 @@ def watts(state: dict | None) -> tuple:
     return value * WATTS_PER[unit], unit
 
 
+def unit_fault(state: dict | None):
+    """SAFETY-118. `None` unless `state` holds a number whose unit cannot be
+    read in watts, then that unit (`""` for none). A missing, unavailable or
+    non-numeric state is a missing reading, not a unit fault, so it is `None`.
+    """
+    if state is None:
+        return None
+    raw = str(state.get("state", "")).strip()
+    if raw.lower() in BAD_STATES:
+        return None
+    try:
+        float(raw)
+    except ValueError:
+        return None
+    unit = str((state.get("attributes") or {}).get(UNIT_KEY) or "").strip()
+    return None if unit in WATTS_PER else unit
+
+
 # --- TEL-12: the ROSTER, and the SITE figure over it --------------------------
 
 def entities(opts: dict) -> tuple:

goodwe_controller/app/uilayout.py

@@ -194,7 +194,7 @@ GROUPS = (
             Field("peak_cap_w", SLIDER, "kW", scale=1000, step=100,
                   simple=True, wizard=5, note="month_peak"),
             Field("peak_margin_w", SLIDER, "W", step=10),   # SAFETY-79
-            Field("peak_forecast_entity", ENTITY, kind="power_w", wizard=5),
+            Field("peak_forecast_entity", ENTITY, kind="power", wizard=5),
             Field("peak_soc_floor", LOCKED, "%"),
         )),
         Part("start", (

goodwe_controller/app/validate.py

@@ -1741,11 +1741,12 @@ def _card_note(option: str, spec) -> str:
 
 
 # UX-13: entity options whose number the add-on takes as watts, with no unit
-# conversion. pv.py converts each solar entity's own unit, so those are not here.
+# conversion. pv.py converts each solar entity's own unit, so those are not here,
+# and SAFETY-118 moved the peak forecast there too.
 WATT_ENTITY_KEYS = (
     "meter_entity", "p1_net_entity", "p1_import_entity", "p1_export_entity",
     "p1_phase_net_entities", "p1_phase_import_entities",
-    "p1_phase_export_entities", "batt_entity", "peak_forecast_entity")
+    "p1_phase_export_entities", "batt_entity")
 
 
 # The meter entities each `meter_source` reads through Home Assistant.
@@ -1829,6 +1830,10 @@ def _entity_notes(notes, opts: dict, entities: dict, bad=()) -> None:
             _advise(notes, "warn", (key,),
                     f"{entity} reads in {unit}, but {S(key, where)} is "
                     "taken as watts, so pick a sensor in W.")
+        if key == "peak_forecast_entity" and unit not in pv.WATTS_PER:
+            _advise(notes, "warn", (key,),
+                    messages.peak_forecast_unit(unit) + " Pick a sensor in "
+                    "W or kW.")
         if key in FORECAST_KEYS and unit not in solarfc.KWH_PER:
             _advise(notes, "warn", (key,),
                     f"{entity} does not read in kWh, so pick a solar "

goodwe_controller/test_safety118.py

@@ -0,0 +1,303 @@
+"""SAFETY-118: the peak forecast is read in its own unit.  `python3 -B test_safety118.py`
+
+`peak_forecast_entity` used to be read as a bare number and anything under 50
+was multiplied by 1000, so a W sensor reading 17 W was taken as 17 kW. It is
+now read through `pv.watts()` by its own `unit_of_measurement`. No unit, or a
+unit that is not power: the forecast is not used, as if the option were empty.
+
+1. The reader through the real `read_inputs()`: W, kW, MW, no unit, kWh, bad state.
+2. The warning: once, again only when the cause changes, never every cycle.
+3. One state read per cycle, as before.
+4. The maintenance charge headroom and the charge-only clamp act on the
+   converted value (real `cycle()`).
+5. The validator, the status row and the strings.
+
+Mutating a module this file grades? Read MUTATION.md first (purge __pycache__).
+"""
+
+import asyncio
+import logging
+from pathlib import Path
+
+from app import main as _main
+from app import messages, pv, validate
+from app.main import Controller
+
+fails = []
+
+
+def check(name, cond):
+    print(f"  {'ok  ' if cond else 'FAIL'} {name}")
+    if not cond:
+        fails.append(name)
+
+
+def st(value, unit=None):
+    attrs = {} if unit is None else {"unit_of_measurement": unit}
+    return {"state": str(value), "attributes": attrs}
+
+
+class _Store:
+    def __init__(self, data=None):
+        self.data = dict(data or {})
+
+    def set(self, k, v):
+        self.data[k] = v
+
+    def get_time(self, *a):
+        return None
+
+    def set_time(self, *a):
+        pass
+
+
+class _Pub:
+    enabled = False
+
+    def publish(self, *a, **k):
+        pass
+
+    def close(self):
+        pass
+
+
+class _Hass:
+    def __init__(self, fc=None, prices=None):
+        self.fc = fc
+        self.prices = prices or {}
+        self.reads = []
+        self.writes = []
+
+    async def limits(self, entity):
+        return (-5000.0, 5000.0, 1.0)
+
+    async def state(self, entity):
+        self.reads.append(entity)
+        if entity == "sensor.fc":
+            return self.fc
+        v = {"sensor.grid": 0.0, "sensor.soc": 50.0, "sensor.batt": 0.0,
+             **self.prices}.get(entity)
+        return None if v is None else st(v, "W")
+
+    async def number(self, entity, invert=False):
+        obj = await self.state(entity)
+        try:
+            return float(obj["state"]) if obj else None
+        except ValueError:
+            return None
+
+    async def set_number(self, entity, value):
+        self.writes.append(float(value))
+        return True
+
+    async def call(self, domain, service, data):
+        return True
+
+
+OPTS = {"setpoint_entity": "number.sp", "meter_entity": "sensor.grid",
+        "soc_entity": "sensor.soc", "batt_entity": "sensor.batt",
+        "meter_source": "off", "heartbeat_s": 10, "stale_input_s": 15,
+        "max_w": 5000.0, "gain": 0.6, "slew_w": 400.0, "deadband_w": 15,
+        "step_w": 10, "target_grid_w": -10.0, "stale_input_s": 15,
+        "peak_cap_w": 5000, "peak_margin_w": 0,
+        "peak_forecast_entity": "sensor.fc"}
+
+
+class _Rec(logging.Handler):
+    def __init__(self):
+        super().__init__(logging.DEBUG)
+        self.rows = []
+
+    def emit(self, r):
+        self.rows.append((r.levelno, r.getMessage()))
+
+
+def make(fc, store=None, prices=None, **over):
+    hass = _Hass(fc, prices)
+    c = Controller(dict(OPTS, **over), hass, _Store(store), _Pub(),
+                   stop=asyncio.Event())
+    c.auto, c.dev_min, c.dev_max = True, -5000.0, 5000.0
+    return c, hass
+
+
+def reads(c):
+    asyncio.run(c.read_inputs())
+    return c.peak_fc
+
+
+def peak_of(state):
+    c, _h = make(state)
+    return reads(c)
+
+
+print("1. the reader")
+CASES = [("W 17", st(17, "W"), 17.0), ("W 820", st(820, "W"), 820.0),
+         ("kW 0.82", st(0.82, "kW"), 820.0), ("kW 0.017", st(0.017, "kW"), 17.0),
+         ("MW 0.0008", st(0.0008, "MW"), 800.0), ("W 49", st(49, "W"), 49.0),
+         ("W 50", st(50, "W"), 50.0), ("kW 30", st(30, "kW"), 30000.0),
+         ("W 0", st(0, "W"), 0.0)]
+for label, s, want in CASES:
+    got = peak_of(s)
+    check(f"{label} -> {want} W (got {got})",
+          got is not None and abs(got - want) < 1e-6)
+for label, s in [("no unit", st(820)), ("empty unit", st(820, "")),
+                 ("kWh", st(820, "kWh")), ("percent", st(20, "%")),
+                 ("unavailable", st("unavailable", "W")),
+                 ("unknown", st("unknown", "W")), ("missing entity", None),
+                 ("not a number", st("sunny", "W"))]:
+    check(f"{label} -> None (got {peak_of(s)})", peak_of(s) is None)
+c, _h = make(st(820, "W"), peak_forecast_entity="")
+check("option empty -> None and the entity is never read",
+      reads(c) is None and "sensor.fc" not in _h.reads)
+
+print("2. the warning")
+rec = _Rec()
+lg = logging.getLogger("goodwe")
+lg.addHandler(rec)
+lg.setLevel(logging.DEBUG)
+
+
+def warns():
+    return [m for lv, m in rec.rows if lv >= logging.WARNING]
+
+
+c, h = make(st(820, "kWh"))
+for _ in range(5):
+    reads(c)
+check(f"kWh: five cycles, one WARNING ({warns()})", len(warns()) == 1)
+check("...short, plain, and says it is not used",
+      warns()[0] == "The 15-minute demand forecast is not in a power unit, so "
+      "it is not used." and len(warns()[0].split()) <= 25)
+h.fc = st(820, "MWh")
+reads(c)
+check("the same cause with another unit warns again (the cause changed)",
+      len(warns()) == 2)
+h.fc = st(820)
+reads(c)
+check("no unit is a different cause and warns", len(warns()) == 3
+      and "has no unit" in warns()[2])
+reads(c)
+check("...and only once", len(warns()) == 3)
+h.fc = st("unavailable")
+reads(c)
+check("unavailable is no unit fault and adds no warning", len(warns()) == 3)
+h.fc = st(820, "W")
+reads(c)
+check("a good unit is read again and logs INFO, not a warning",
+      c.peak_fc == 820.0 and len(warns()) == 3
+      and rec.rows[-1] == (logging.INFO,
+                           "The 15-minute demand forecast is used again."))
+n = len(warns())
+for s in (st(820, "W"), st(0.8, "kW")):
+    h.fc = s
+    reads(c)
+check("W and kW never warn", len(warns()) == n)
+rows = [r for r in c.checks() if r.get("id") == "peak_forecast"]
+check("a good forecast has no peak_forecast row", not rows)
+h.fc = st(820, "kWh")
+reads(c)
+rows = [r for r in c.checks() if r.get("id") == "peak_forecast"]
+check("the status page carries a caution row for the unit fault",
+      len(rows) == 1 and rows[0]["warn"] and not rows[0]["ok"]
+      and rows[0]["text"] == messages.row_peak_forecast_unit("kWh"))
+lg.removeHandler(rec)
+
+print("3. one state read per cycle")
+c, h = make(st(0.82, "kW"))
+reads(c)
+check(f"one read of the forecast entity per read_inputs() ({h.reads})",
+      h.reads.count("sensor.fc") == 1)
+
+print("4. maintenance headroom and the charge-only clamp use watts")
+seen = []
+_real = _main.maintenance_charge_floor
+
+
+def spy(charge_w, fc, cap):
+    out = _real(charge_w, fc, cap)
+    seen.append((charge_w, fc, cap, out))
+    return out
+
+
+_main.maintenance_charge_floor = spy
+try:
+    def cycle(fc, **kw):
+        c, h = make(fc, store={"phase": "charge"},
+                    prices={"sensor.pnow": 1.0, "sensor.pavg": 2.0},
+                    price_now_entity="sensor.pnow",
+                    price_avg_entity="sensor.pavg", **kw)
+        seen.clear()
+        asyncio.run(c.read_inputs())
+        asyncio.run(c.cycle())
+        return c, h
+
+    # cap 2500 W, charge rate 2000 W: 820 W of forecast leaves 1680 W, 17 W
+    # leaves the whole 2000 W (the size rule read 17 as 17 kW and left 0).
+    c, h = cycle(st(0.82, "kW"), peak_cap_w=2500)
+    check(f"cheap-window headroom is cap - 820 W = 1680 W ({seen})",
+          len(seen) == 1 and seen[0][1] == 820.0 and seen[0][0] == 2000.0
+          and abs(seen[0][3] - 1680.0) < 1e-6)
+    c, h = cycle(st(17, "W"), peak_cap_w=2500)
+    check(f"a 17 W forecast leaves the full 2000 W charge rate ({seen})",
+          len(seen) == 1 and seen[0][1] == 17.0 and abs(seen[0][3] - 2000.0) < 1e-6)
+    # charge-only clamp: not cheap, shaping suspended only if the forecast is
+    # over the aim.  6 kW is over 5000 W; 17 W is not (the old rule read it
+    # as 17 kW and suspended).
+    def clamp(fc):
+        c, h = make(fc, store={"phase": "charge"})
+        asyncio.run(c.read_inputs())
+        asyncio.run(c.cycle())
+        return c._maint_shape_suspended
+    check("kW 6.0 (6000 W, over the 5000 W aim) suspends the charge-only clamp",
+          clamp(st(6.0, "kW")) is True)
+    check("W 17 leaves the charge-only clamp in place",
+          clamp(st(17, "W")) is False)
+    check("kW 0.017 leaves the charge-only clamp in place",
+          clamp(st(0.017, "kW")) is False)
+    check("no unit: forecast unused, clamp in place, as with the option empty",
+          clamp(st(6000)) is False)
+finally:
+    _main.maintenance_charge_floor = _real
+
+print("5. validator and strings")
+def notes(unit, key="peak_forecast_entity"):
+    ent = {"sensor.fc": {"entity_id": "sensor.fc", "unit": unit,
+                         "state": "1"}}
+    return [n for n in validate.config_notes(
+        {key: "sensor.fc", "meter_source": "off"}, entities=ent)
+        if key in n.keys]
+
+
+check("validator: W no note", not notes("W"))
+check("validator: kW no note", not notes("kW"))
+check("validator: MW no note", not notes("MW"))
+nu, kw = notes(""), notes("kWh")
+check(f"validator: no unit warns ({nu})", len(nu) == 1 and nu[0].tier == "warn"
+      and "has no unit" in nu[0].text)
+check(f"validator: kWh warns ({kw})", len(kw) == 1 and kw[0].tier == "warn"
+      and "not in a power unit" in kw[0].text)
+check("validator: the false 'taken as watts' claim is gone for this entity",
+      not any("taken as watts" in n.text for n in nu + kw + notes("kW")))
+check("validator: another watt key keeps its claim",
+      len(notes("kW", "batt_entity")) == 1
+      and "taken as watts" in notes("kW", "batt_entity")[0].text)
+check("WATT_ENTITY_KEYS no longer holds the peak forecast",
+      "peak_forecast_entity" not in validate.WATT_ENTITY_KEYS
+      and "batt_entity" in validate.WATT_ENTITY_KEYS)
+print("   EN no unit :", messages.peak_forecast_unit(""))
+print("   EN bad unit:", messages.peak_forecast_unit("kWh"))
+print("   NL no unit :", messages.peak_forecast_unit("", "nl"))
+print("   NL bad unit:", messages.peak_forecast_unit("kWh", "nl"))
+check("the strings differ by cause and by language",
+      len({messages.peak_forecast_unit(u, l) for u in ("", "kWh")
+           for l in ("en", "nl")}) == 4)
+check("pv.unit_fault: None for a good unit and for a missing reading",
+      pv.unit_fault(st(1, "kW")) is None and pv.unit_fault(None) is None
+      and pv.unit_fault(st("unavailable")) is None
+      and pv.unit_fault(st(1)) == "" and pv.unit_fault(st(1, "kWh")) == "kWh")
+src = (Path(__file__).parent / "app" / "main.py").read_text(encoding="utf-8")
+check("the size rule is gone from main.py", "abs(raw) < 50" not in src)
+
+print()
+print("FAILED: " + "; ".join(fails) if fails else "all checks passed")
+raise SystemExit(1 if fails else 0)

goodwe_controller/tools/opt11_identity.py

@@ -105,6 +105,13 @@ class _Hass:
             return self.power(u)
         return None
 
+    async def state(self, e):
+        """SAFETY-118: the peak forecast is read as a state object; every
+        number this rig serves is in watts."""
+        v = await self.number(e)
+        return None if v is None else {
+            "state": str(v), "attributes": {"unit_of_measurement": "W"}}
+
     async def set_number(self, e, v):
         self.cmd[e[-1]] = float(v)
         return True

goodwe_controller/translations/en.yaml

@@ -165,7 +165,7 @@ configuration:
     description: "The add-on aims this much below the peak limit, so a 15-minute period that ends a little high still stays under it."
   peak_forecast_entity:
     name: "Limits · 15-minute demand forecast entity (W)"
-    description: "Optional. A forecast of this 15-minute period's average power. Leave it empty and there is no peak limit."
+    description: "Optional. A forecast of this 15-minute period's average power, in W or kW. With no power unit it is not used. Leave it empty and there is no peak limit."
   peak_soc_floor:
     name: "Limits · Peak reserve (%)"
     description: "Peak limiting will not draw the battery below this level, but ordinary use can. Derived value, leave it unchanged."

goodwe_controller/translations/nl.yaml

@@ -146,7 +146,7 @@ configuration:
     description: "De add-on mikt zoveel onder de piekgrens, zodat een kwartier dat iets hoger uitvalt er toch onder blijft."
   peak_forecast_entity:
     name: "Grenzen · Entiteit kwartierprognose (W)"
-    description: "Optioneel. Een prognose van het gemiddelde vermogen in het lopende kwartier. Laat u dit leeg, dan is er geen piekgrens."
+    description: "Optioneel. Een prognose van het gemiddelde vermogen in het lopende kwartier, in W of kW. Zonder vermogenseenheid wordt ze niet gebruikt. Laat u dit leeg, dan is er geen piekgrens."
   peak_soc_floor:
     name: "Grenzen · Piekreserve (%)"
     description: "De piekbeperking laat de batterij niet onder dit niveau zakken, gewoon verbruik wel. Afgeleide waarde, laat ze ongewijzigd."