CI-06: test_peakguard.py answered two of its checks with the wall clock

`test_peakguard.py` is flaky on the required `checks / unit (pull_request)`
context. Reproduced, measured and removed - not widened, and nothing skipped:
the file still carries all of SAFETY-07 and SAFETY-25, and gains a check.

TWO MECHANISMS, both the control law's own gain `900 / remaining` applied to a
wall-clock gap this file never meant to have.

1. THE CROSS-TIME PROJECTION (the "one cycle of the intent form..." check).
   `_proj3` was a SECOND `PeakTracker.project(b3.p1.averager, datetime.now())`
   taken after the real cycle had already returned, and its result was compared
   against a floor decided from the FIRST projection - while the comment three
   lines above says both forms run "against the same frozen projection".
   `excess = 900 x (projected - ceiling) / remaining` moves at `excess /
   remaining` W/s, so at a 1500 W floor the 1.5 W tolerance bought exactly
   `remaining / 1000` seconds: 333 ms with 880 s left in the quarter and 6 ms
   with 10 s left (measured by bisection, probe in the PR). The gap between the
   two statements measured 12.7-39.5 ms over 26 instrumented runs, so the check
   was decided by WHERE IN THE QUARTER it ran, about `gap_ms / 900` of the time.
   FIX: `_recording_decide` keeps the Projection OBJECT the real cycle graded.
   Both forms are now decided from it, the clock is out of the comparison, and
   the tolerance is EXACT rather than 1.5 W. Measured on a real cycle: the
   delivered form re-decided from that object reproduces the controller's own
   floor to 0.000000000000 W, and the identity holds to 0.000000000000 W.
   It also gains a check - that re-decide now pins `_kw` as main.py's actual
   call rather than an approximation of it.

2. THE FIXTURE'S OWN ROOM (the three `wired_over_limit` checks named on the
   card: "the real cycle files the peak claim...", "...and the number written to
   the inverter is the guard's floor", "the STATUS PAGE row for a floor-limited
   guard..."). `range(0, span + 1, 5)` leaves 0-5 s of the open block uncovered
   by construction, and `excess` multiplies an uncovered second back up by
   `900 / remaining`:

       floor ~ want x (1 - uncovered/900) - net_w x uncovered / remaining

   Measured on this tree, shipped: at 12 s of remaining a fixture that asked for
   a 1500 W floor delivered 613 W (-59 %), and at 2 s the guard did not engage
   at all - which fails all three of those checks together. The four-attempt
   retry cannot help, because four attempts take ~40 ms and all land in the same
   dying quarter.
   FIX: one telegram stamped at `now` (which is what a real meter does and what
   the docstring already claimed), plus FIXTURE_ROOM_S - the helper waits out
   the tail of a quarter it cannot size a fixture in. 24 s is DERIVED from the
   1 % accuracy the helper promises, at this file's smallest fixture and the
   measured 0.1 s worst-case lag, not picked:
       net_w x lag / (remaining x want) <= 0.01 - lag/900
       remaining >= 3500 x 0.1 / (1500 x 0.00989) = 23.6 s
   Same probe after the fix: -0.3 % at 12 s, -0.5 % at 8 s, still engaged at 2 s.

NO TIMEOUT WAS WIDENED, no check skipped, no xfail. One tolerance was made
STRICTER (1.5 W -> exact) because removing the clock made exactness possible.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BwRLw7eKYj2byVdwB6kbjU

goodwe_controller/CHANGELOG.md

@@ -1,7 +1,84 @@
 # Changelog
 
+## 0.7.0
+
+⚠️ **SCHEMA CHANGE, AND IT IS WHY THIS IS A MINOR BUMP RATHER THAN A PATCH.**
+[[SAFETY-32]] adds `bms_soc_floor: int(0,50)` as a **required** per-entry key on
+the `inverters` roster - no trailing `?`. A config that declares a roster and
+omits it on any entry is REFUSED at startup. An install running `inverters: []`,
+which is every single-inverter install including the reference one, is
+unaffected: the flat `bms_soc_floor` still describes the one pack.
+
+CFG-04 recorded the rule this follows - the Supervisor keys the built image by
+`version:`, so a schema change without a bump is a schema nobody reads.
+
+Contents, in merge order since 0.6.0 (`2d025ee`):
+
+| | |
+|---|---|
+| `3934ad7` | MAINT-05 - one recalibration per pack, migration graded against the roster |
+| `67e649a` | SPIKE-04a - inverter B and pack B recorded, from datasheet and serial |
+| `3993f9f` | SAFETY-32 - per-pack `bms_soc_floor`, rule 8 per unit, package-wide roster pin |
+| `f72c48d` | UX-01 - add-on configuration in English and Dutch |
+| `86eaef2` | TEL-07 - a second MQTT device for inverter B; A's identity byte-identical |
+| `4482cd8` | SAFETY-41 - the clamp alarm stops narrating normal anti-windup |
+
+⚠️ **0.6.0 WAS NEVER SECTIONED.** Its content sits below this heading rather than
+under one of its own, because the bump shipped without cutting the section. That
+is a defect in this file, not in the release: the deployed 0.6.0 is `2d025ee` and
+the table above is what is new since it. Splitting it retroactively would mean
+guessing a boundary; saying so is more useful than a guess.
+
 ## Unreleased
 
+**`test_peakguard.py` answered two of its own checks with the wall clock
+(CI-06).** The file sits on the required `checks / unit (pull_request)` context
+and had a measured ~20 % flake rate. It cost a wrong merge diagnosis (parents
+green, merge red — read as a semantic merge conflict, it was the flake), a false
+red on two reviewers' CONTROL runs, and a false "mutation caught" that reached a
+merged card in four places. **A flaky check does not waste a re-run; it
+manufactures evidence for whichever hypothesis the reader already holds.**
+
+Both causes are the control law's own gain `900 / remaining` applied to a
+wall-clock gap the file never intended to have. Neither fix widens anything.
+
+* **The cross-time projection.** The "one cycle of the intent form is exactly
+  the delivered form plus the command standing on the wire" check decided the
+  intent form from a **second** `PeakTracker.project(..., datetime.now())` taken
+  after the real cycle had returned, and compared it against a floor decided
+  from the **first** projection — three lines under a comment saying both run
+  "against the same frozen projection". `excess = 900 × (projected − ceiling) /
+  remaining` moves at `excess / remaining` W/s, so at a 1500 W floor the 1.5 W
+  tolerance bought exactly **`remaining / 1000` seconds**: 333 ms with 880 s
+  left in the quarter, **6 ms with 10 s left**. The gap between the two
+  statements measured **12.7–39.5 ms** over 26 instrumented runs. The check was
+  decided by *where in the quarter it ran*. It now keeps the `Projection`
+  **object** the real cycle graded and decides both forms from it — the clock is
+  out of the comparison and the tolerance is **exact**, not widened. Measured on
+  a real cycle: re-deciding the delivered form from that object reproduces the
+  controller's own floor to **0.000000000000 W**.
+* **The fixture's own room.** `wired_over_limit()` laid telegrams with
+  `range(0, span + 1, 5)`, leaving **0–5 s of the open block uncovered by
+  construction**, and `excess` multiplies an uncovered second back up by
+  `900 / remaining`. Measured on the shipped file: at **12 s of remaining a
+  fixture that asked for a 1500 W floor delivered 613 W (−59 %)**, and at 2 s
+  the guard **did not engage at all** — which fails "the real cycle files the
+  peak claim", "…and the number written to the inverter is the guard's floor"
+  and "the STATUS PAGE row for a floor-limited guard" **together**. The
+  four-attempt retry could not help: four attempts take ~40 ms and all land in
+  the same dying quarter. Fixed with one telegram stamped at `now` (what a real
+  meter does, and what the docstring already claimed) plus `FIXTURE_ROOM_S`,
+  **derived** from the 1 % accuracy the helper promises rather than picked:
+  `net_w × lag / (remaining × want) ≤ 0.01 − lag/900` → **23.6 s → 24 s**, at
+  the measured 0.1 s worst-case lag.
+
+**Nothing was skipped, disabled or marked xfail** — the file still carries all
+of SAFETY-07 and SAFETY-25's forced-discharge SoC floor, and it gains a check:
+the delivered form re-decided from the cycle's own projection must reproduce the
+real controller's number to the bit, which pins the test's `decide()` kwargs as
+main.py's actual call rather than an approximation of it. **One tolerance got
+stricter** (1.5 W → exact), because removing the clock made exactness possible.
+
 **Inverter B gets its own MQTT device, and inverter A keeps the one it has
 (TEL-07).** MQTT discovery announced **one** device, and every entity hung off
 one `unique_id` prefix, so at two inverters B's per-unit telemetry had nowhere

goodwe_controller/config.yaml

@@ -1,5 +1,5 @@
 name: GoodWe RS485 Controller
-version: "0.6.0"
+version: "0.7.0"
 slug: goodwe_controller
 description: >-
   Drives a GoodWe ES/BP battery inverter over RS485 by emulating its smart

goodwe_controller/test_peakguard.py

@@ -109,6 +109,7 @@ import re
 import shutil
 import sys
 import tempfile
+import time
 from datetime import datetime, timedelta, timezone
 from math import inf, isinf
 from pathlib import Path
@@ -1062,6 +1063,58 @@ check("...and the status page says NOT COVERED rather than 'idle' or a green "
 # block with no seconds remaining - so the whole setup is retried on a fresh
 # Controller rather than left to flake. It is bounded at three attempts: a fourth
 # would mean something is wrong that is not a boundary.
+#
+# ⚠️⚠️ CI-06. AND THE QUARTER MUST HAVE ROOM LEFT TO SIZE A FIXTURE IN, WHICH IS
+# A SECOND AND MUCH WIDER RACE THAN THE BOUNDARY ONE ABOVE. It is where three of
+# this file's four known-flaky checks came from, and it is not a boundary
+# effect - it is the control law's own gain applied to this helper's arithmetic.
+#
+# Every second of the open block the telegrams do NOT cover is credited at the
+# HELD value instead of the measured one, so the projection loses `net_w x
+# uncovered / 900` W - and `excess = 900 x (projected - ceiling) / remaining`
+# multiplies that back up by `900 / remaining`. The floor this helper delivers
+# is therefore
+#
+#     floor ~ want x (1 - uncovered/900) - net_w x uncovered / remaining
+#
+# and the second term is the whole story: at 600 s left one uncovered second
+# costs 6 W of a 1500 W floor, at 12 s left it costs 292 W, and at 3 s left it
+# takes the projection under the ceiling and THE GUARD DOES NOT ENGAGE AT ALL -
+# which fails "the real cycle files the peak claim", "...and the number written
+# to the inverter is the guard's floor" and "the STATUS PAGE row for a
+# floor-limited guard" together, for no reason except the minute the suite ran.
+# Measured on this tree as shipped: at 12 s left the fixture asked for 1500 W
+# and delivered 613 W, a -59 % fixture that stayed green and graded a different
+# site than the one its text names.
+#
+# TWO uncovered stretches produced it and both are closed here:
+#
+#   1. THE TAIL. `range(0, span + 1, 5)` stops at the last 5 s mark at or before
+#      `now`, so 0-5 s of the block were never covered by construction. One
+#      final telegram stamped at `now` closes it - which is also what a real
+#      meter does, and what this helper's own docstring already claims it does.
+#   2. THE LAG between that last telegram and `cycle()`'s own `datetime.now()`.
+#      That one is real work and cannot be removed, only bounded: measured at
+#      12-96 ms over 23 fixtures on this tree under contention.
+#
+# So the ROOM the helper needs is derived from what it promises rather than
+# picked. Requiring the delivered floor to be within 1 % of the floor asked for,
+# at the shipped ceiling and this file's smallest fixture (`net_w` ~ 3500 W,
+# `want` 1500 W), and taking the lag at 0.1 s - past every one of the 23
+# measurements:
+#
+#     net_w x lag / (remaining x want) <= 0.01 - lag/900
+#     remaining >= 3500 x 0.1 / (1500 x 0.00989) = 23.6 s  ->  FIXTURE_ROOM_S
+#
+# Below that the helper WAITS OUT THE REST OF THE QUARTER rather than grading a
+# fixture the arithmetic cannot deliver. The wait is at most FIXTURE_ROOM_S and
+# is taken on about 2.6 % of runs; a suite that silently graded a -59 % fixture
+# instead was the alternative. ⚠️ This is not a widened tolerance - the checks
+# downstream are unchanged and the 1 % is a requirement on the FIXTURE, not on
+# any assertion.
+FIXTURE_ROOM_S = 24.0
+
+
 def wired_over_limit(db, want_floor_w, opts=None, store=None, batt_w=0.0,
                      standing_w=None, soc=55.0, prepare=None):
     """A real Controller driven one real cycle over a real over-limit quarter.
@@ -1081,6 +1134,13 @@ def wired_over_limit(db, want_floor_w, opts=None, store=None, batt_w=0.0,
     computed backwards from `remaining` at the moment of the run.
     """
     for attempt in range(4):
+        # ⚠️ ROOM FIRST, AND BEFORE THE CONTROLLER IS BUILT. See FIXTURE_ROOM_S.
+        # Retrying does not help here - four attempts take ~40 ms each and all
+        # four would land in the same dying quarter - so the tail of the block
+        # is waited out once, which puts the next attempt at ~900 s of room.
+        _room = QUARTER_S - (datetime.now(timezone.utc).timestamp() % QUARTER_S)
+        if _room < FIXTURE_ROOM_S:
+            time.sleep(_room + 0.05)
         ctl, hs = built(db if attempt == 0 else Path(f"{db}.{attempt}"), opts,
                         store=_Store(store) if store is not None else None)
         ctl.auto, ctl.soc, ctl.batt = True, soc, batt_w
@@ -1099,6 +1159,13 @@ def wired_over_limit(db, want_floor_w, opts=None, store=None, batt_w=0.0,
         net_w = CAP_W + want_floor_w * remaining / QUARTER_S
         for i in range(0, span + 1, 5):
             ctl.p1.submit(sample(blk + timedelta(seconds=i), net_w))
+        # ⚠️ AND ONE TELEGRAM AT `now` ITSELF. The averager credits a sample's
+        # value over the interval to the NEXT sample, so without this the block
+        # is covered only to the last 5 s mark and 0-5 s of it are extrapolated
+        # from the held value. See the header: at 12 s of remaining that alone
+        # turned a 1500 W fixture into a 613 W one. A real meter does not stop
+        # sending at the last multiple of five either.
+        ctl.p1.submit(sample(now, net_w))
         # ⚠️ ASSIGNED, not read back from `p1.net_w`. This helper stamps
         # `ingest_mono` with an epoch second so the averager (which keys on
         # `ingest_ts`) replays correctly, while `net_w` keys on a MONOTONIC age
@@ -1273,6 +1340,23 @@ _shipped_decide = peakguard.decide
 
 def _recording_decide(projection, **kw):
     _seen.update(kw)
+    # ⚠️ CI-06. THE PROJECTION OBJECT ITSELF IS KEPT, AND THAT IS WHAT MAKES THE
+    # COMPARISON BELOW A COMPARISON RATHER THAN A RACE. The check under
+    # "THE CONSEQUENCE, ITERATED" says both forms are run "against the same
+    # frozen projection", and until this line existed that sentence was FALSE:
+    # the intent form was decided against a SECOND `PeakTracker.project(
+    # b3.p1.averager, datetime.now())` taken after the cycle had returned, so
+    # the two numbers came from two different instants of the wall clock. The
+    # control law is `excess = 900 x (projected - ceiling) / remaining`, whose
+    # derivative in time is `excess / remaining`, so at a 1500 W floor the two
+    # instants separated at 1500 / remaining W per second and the check's 1.5 W
+    # tolerance bought exactly `remaining / 1000` SECONDS - 900 ms at the top of
+    # a quarter and 6 ms with ten seconds left of it. Measured on this tree, the
+    # gap between the two statements is 13-40 ms idle and larger under load, so
+    # the check was answered by WHERE IN THE QUARTER IT RAN about `gap_ms / 900`
+    # of the time. Keeping the object removes the clock from the comparison
+    # altogether: the tolerance below is EXACT, not widened.
+    _seen["projection"] = projection
     return _shipped_decide(projection, **kw)
 
 
@@ -1294,15 +1378,36 @@ check("B3: main.py sizes the floor from the MEASURED battery power, not from "
 # against the same frozen projection - the inverter never follows, so the meter
 # never moves - and the two are allowed to separate over time rather than being
 # judged at a single point where they need not differ.
-_proj3 = PeakTracker.project(b3.p1.averager, datetime.now(timezone.utc))
+#
+# ⚠️ CI-06. "THE SAME FROZEN PROJECTION" IS NOW THE SAME OBJECT. `_proj3` is the
+# `Projection` the real cycle actually graded, captured by `_recording_decide`
+# above, and not a second projection of the same averager taken at a later
+# `datetime.now()`. Every number below therefore comes from ONE instant, and the
+# tolerances that used to absorb the wall clock are gone.
+_proj3 = _seen["projection"]
 _kw = dict(cap_w=CAP_W, reading=b3.peak.peak(), achievable_w=LIVE_MAX_W,
            max_hold_s=b3.p1.averager.max_hold_s, soc=SOC_OK,
            soc_floor=SOC_FLOOR)
 _intent = _shipped_decide(_proj3, batt_w=STANDING, **_kw)
+# The delivered form, re-decided from the SAME projection. It has to reproduce
+# the real controller's own floor EXACTLY or `_kw` is not the call main.py
+# makes - which is a second thing this now grades and did not before, and the
+# one that keeps the identity below honest rather than self-referential.
+_delivered = _shipped_decide(_proj3, batt_w=0.0, **_kw)
+check("the delivered form re-decided from the cycle's OWN projection is the "
+      "number the real Controller wrote, to the bit. The kwargs below are "
+      "main.py's call and not an approximation of it, so the identity that "
+      "follows is a statement about `decide()` and not about this fixture",
+      near(_delivered.floor_w, b3.peak_guard.floor_w))
 check("one cycle of the intent form is exactly the delivered form plus the "
       "command standing on the wire - which is the whole defect in one line: "
-      "watts that were asked for and never arrived, counted as if they had",
+      "watts that were asked for and never arrived, counted as if they had. "
-      near(_intent.floor_w - b3.peak_guard.floor_w, STANDING, 1.5))
+      "⚠️ EXACT, not within 1.5 W: both forms are decided from one Projection "
+      "object, so a tolerance here would only be hiding a clock. CI-06 - the "
+      "1.5 W it used to carry bought `remaining / 1000` seconds and made this "
+      "line answer by where in the quarter the suite happened to run",
+      near(_intent.floor_w - _delivered.floor_w, STANDING)
+      and not _intent.saturated and not _delivered.saturated)
 
 _i_cmd, _d_batt = STANDING, 0.0
 _i_track, _d_track, _i_sat_at = [], [], None