4 Commits

Include renames

Author	SHA1	Message	Date
glenn schrooyenandClaude	0f5e513f1d	MAINT-24: keep the refusal probe beside a maintenance charge ... The mode trade still lets a SAFETY-73 probe (PROBE_W alone) go on while a pack is in its maintenance CHARGE phase; test_opt20.py g7 pins it. ch_ch_maint digest moved (B no longer grid-charges beside A's charge). Co-Authored-By: Claude <noreply@anthropic.com>	2026-11-12 07:33:04 +01:00
glenn schrooyenandClaude	88ab8a50e3	SAFETY-125: a grid charge counts a late meter reading's seconds; the guard row says "over" when it is ... A meter reading late near a quarter's end left seconds the projection did not count (SAFETY-99), and charge_headroom_w() read them as room: the cheap run (and price trading, and the N=2 maintenance charge) went back to full power in the quarter's last seconds and the quarter could land over a banked month peak or the cap. peakguard.charge_room_w() counts those seconds at the held reading for the charge only; the guard's floor is unchanged. The guard row said "idle, heading for 5 814 W, under this month's 5 413 W peak". Over the limit at the current rate the row and the month-peak line now say so, and that the grid charge is cut back. Version 0.19.2, CHANGELOG, DECISIONS. test_safety125.py new; the lag pins in test_price_run_fixes.py and test_opt20.py and the AST pin in test_arbitrage.py follow the change (see the pull request). Co-Authored-By: Claude <noreply@anthropic.com>	2026-10-29 02:08:38 +01:00
glenn schrooyenandClaude	ccdb9dc17a	OPT-20: test_opt20 points at MUTATION.md (test_bytecode part 5) ... Co-Authored-By: Claude <noreply@anthropic.com>	2026-10-15 13:12:22 +02:00
glenn schrooyenandClaude	06339a2446	OPT-20: a refusal probe asks only PROBE_W, not the whole trade ... The probe's trade was sized at the probing battery's rating. Its SAFETY-73 pin held 200 W of that, and the allocator put the rest on a battery with no mode range (one in a maintenance phase): TEST-23 OPT-15 g7, -2300 W on A in its maintenance charge for 34 s, grid 3100 W. modetrade.decide() now asks PROBE_W for the probing battery plus what the other chargers would have had without the probe; size() adds the probe on top of their share, or files PROBE_W exactly, or nothing. _mode_trade() carries the pin only on the ticks it is filed, so the window's first and last cycle do not move another battery's share either. Modes off and modes on with no probe are unchanged (bf9019e digests). Tests: test_opt20.py. Co-Authored-By: Claude <noreply@anthropic.com>	2026-10-15 13:08:59 +02:00