4 Commits

Include renames

Author	SHA1	Message	Date
glenn schrooyenandClaude	85433edac6	SAFETY-129 round 2: shorter test_safety129, pinned 5 s row, 100 s bound ... Co-Authored-By: Claude <noreply@anthropic.com>	2026-11-06 21:24:37 +01:00
glenn schrooyenandClaude	2667cf0dda	SAFETY-129: the 5 s row no longer waits for the batteries' figure ... At a 5 s meter the slow meter fit now finds 30 s late first, and the hold leaves the batteries' fit nothing to measure, so the row says it without a figure. Co-Authored-By: Claude <noreply@anthropic.com>	2026-11-06 20:04:08 +01:00
glenn schrooyenandClaude	d3f4f9f48b	SAFETY-128 round 2: find late readings from the batteries, not the meter alone ... Review B1: the meter fit took repeating house loads (ovens, a heat pump) for late readings on healthy 1-2 s sites, about 9 % of the recorded house. B2: at a 5 s meter it never ran. M1: no hysteresis. M2: an unbounded check. lateness.Delay now fits how long each battery's reading takes to show its own request, which the house does not move, from the 1 s reads (read_inputs -> Answer.watch). The meter fit stays for speed at 1-3 s meters, but counts only when an ask was slow to start and no battery fit said on time. Late from 9.5 s after 2 fits, on time under 6.5 s, dropped after 120 s without a fit. Fits are bounded (a few ms). Readings on time: no verdict in any reviewer scenario (22 shapes at 1/2/5 s meters, 7 harm runs) nor in 2 days of the recorded house at 1, 2 and 5 s ticks; digests equal to 77fe31b. Late: found 36-68 s after the start at 1-2 s, about 3 min at 5 s. The row gives the batteries' delay, or no figure while only the meter has shown it. Co-Authored-By: Claude <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC	2026-11-02 04:32:04 +01:00
glenn schrooyenandClaude	09e1fbb898	SAFETY-128: control does not act on late Home Assistant readings ... Readings that Home Assistant delivers late but still changing passed every staleness gate, so the loop corrected again each cycle an error its last command had already fixed (10 s late: the give run swung and exported to -1.9 kW), and the peak guard pushed to the inverter limit on the same late figures (OPT-34 F-2). app/lateness.py fits how long after a power request the meter shows it. Over 8 s the readings are late: a request the battery reading has not answered holds the loop (it may not lead the reading by more than 100 W) and caps the peak guard at what stands; unanswered for 23 s it holds, then 0 W after stale_input_s. An amber row and one log line per episode say so. With readings on time nothing changes (digests equal). DECISIONS/SAFETY-128-late-readings.md; test_safety128.py. Co-Authored-By: Claude <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC	2026-11-01 23:45:03 +01:00