4 Commits

Include renames

Author	SHA1	Message	Date
glenn schrooyenandClaude	0d49027daa	MAINT-21: tests read and patch the Controller through tools/main_files.py ... Prepares the split of app/main.py's Controller into files by job, with no app change. tools/main_files.py gives a test the text and the AST of main.py plus the files split from it, and `live`, which sets a global in every file whose functions read it (and raises when none does). Tests that read main.py's source, and tests and replay tools that patch a main global (datetime, compute, resolve, _mono, WRITE_BUDGET_S, ...), go through it, so they pass on this layout and on the split one. test_split_patches.py fails when a test or tool patches an app.main attribute that main.py no longer reads, or that another file also reads. tools/maint21_same_ast.py proves every function, method and module-level assignment of main.py at the base is found unchanged in its new file. Co-Authored-By: Claude <noreply@anthropic.com>	2026-11-09 00:27:07 +01:00
glenn schrooyenandClaude	065792aad3	Merge release/1.0 (e3e4ba6) into opt15-price-run-fixes ... Conflicts (5 files, 9 hunks) resolved keeping both sides: - p1.py: held_t (OPT-15) beside held_since (SAFETY-90). - modetrade.py: chargers() takes targets (P4) and probe (OPT-15); decide() clears the chargers, a probing refuser included, while a battery drains (SAFETY-78); the docstring lists both rules. - main.py: the roll goes into the SAFETY-90/91 projection chain (`_peak_proj`); the SAFETY-95 drain-tail grid_w keeps the run-edge hold on its other branch; the P4 forecast state and the hold state both stay. - DOCS.md, DECISIONS: both lines kept, OPT-15 item refreshed. Adaptations the merge needs: - SAFETY-81 x F1: a rolled projection is not graded by the saturation alarm until the quarter's first sample, as the old edge tick was not, so a standing overload is still notified once per quarter. - test_safety81, test_modes_p4: modes-on pins re-pinned (with a note), modes off pinned to e3e4ba6; test_price_run_fixes: identity pins on e3e4ba6, F1 reproduced at one inverter (SAFETY-91 already holds two), tests for the drain and the day plan against the probe. Co-Authored-By: Claude <noreply@anthropic.com>	2026-10-13 12:15:44 +02:00
adminandClaude Opus 5.5	f967073cfe	SAFETY-81 review: 10 s hold, ERROR line per episode, more scenarios ... - The alarm must hold for peakguard.ALARM_HOLD_S (10 s) on the projection's clock. A load that tops cap + battery for ~5 s every 30 s alarmed at every quarter start while the quarter landed under the aim (sine4500_fast). - A cycle with no battery reading leaves the hold alone. - Notified once per quarter, but the ERROR line is written per episode. - New sim scenarios (sine4500_fast, twice7000, step6500_gap) with 5a4cdc2 digests; control still byte-identical. Unit checks for export and the hold across a missing reading. test_peakguard's saturated fixture moves the hold start back instead of waiting it out. - DECISIONS and DOCS updated: costs of the hold, tolerance reasoning, the double count in control left to a follow-up. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-29 20:58:37 +02:00
goodwe-agent	6eb67c0f9c	SAFETY-81: no false 'Load too high' alarms ... The alarm now also needs peakguard.load_too_high(): with the battery at full power, the quarter still ends more than 10 W over the real limit. The battery reading is the lower of this cycle's and the last, so a meter sample from before the battery's last increase is not counted twice. At most one alarm per quarter. Control outputs unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-29 19:55:38 +02:00