4 Commits

Include renames

Author	SHA1	Message	Date
glenn schrooyenandClaude Opus 5.5	7f0f00b01c	OPT-15 review: pin the rolled export at 0 W and a battery past E; note the maintenance replay ... Two survivors of the review's mutations get a check each in test_price_run_fixes.py (X1: a held export credited negative in the rolled quarter; X4: the hold extended by a reading already past E). DECISIONS: the slow-battery quarter (3456 W, same on e3e4ba6) and the replay of a maintenance phase starting during the hold. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Bdqr7PiaHcBnzPituu2yTC	2026-10-13 14:18:41 +02:00
glenn schrooyenandClaude	065792aad3	Merge release/1.0 (e3e4ba6) into opt15-price-run-fixes ... Conflicts (5 files, 9 hunks) resolved keeping both sides: - p1.py: held_t (OPT-15) beside held_since (SAFETY-90). - modetrade.py: chargers() takes targets (P4) and probe (OPT-15); decide() clears the chargers, a probing refuser included, while a battery drains (SAFETY-78); the docstring lists both rules. - main.py: the roll goes into the SAFETY-90/91 projection chain (`_peak_proj`); the SAFETY-95 drain-tail grid_w keeps the run-edge hold on its other branch; the P4 forecast state and the hold state both stay. - DOCS.md, DECISIONS: both lines kept, OPT-15 item refreshed. Adaptations the merge needs: - SAFETY-81 x F1: a rolled projection is not graded by the saturation alarm until the quarter's first sample, as the old edge tick was not, so a standing overload is still notified once per quarter. - test_safety81, test_modes_p4: modes-on pins re-pinned (with a note), modes off pinned to e3e4ba6; test_price_run_fixes: identity pins on e3e4ba6, F1 reproduced at one inverter (SAFETY-91 already holds two), tests for the drain and the day plan against the probe. Co-Authored-By: Claude <noreply@anthropic.com>	2026-10-13 12:15:44 +02:00
Claude review	c38dd1e969	OPT-15 review: bound unmeasured charge stops, test the hold's rules and M15 ... - A second unmeasured-headroom stop in a quarter latches the charge: a headroom missing every other cycle flipped it 1799 times in 30 min. - Unit test of the run-edge hold's end conditions and of a small step. - Outside its probe a refuser does not make the others rest (M15 red). - DECISIONS: one review line. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-29 22:31:52 +02:00
adminandClaude Opus 5.5	fae6681e19	OPT-15: price-run fixes (quarter edge, charge-end overshoot, refusal probe) ... F1: with battery modes on, the peak guard projects the quarter `now` is in even before its first P1 sample (PeakTracker.project(roll=True)), and only a measured stop latches the period. The edge tick no longer reads "no seconds left", so a charge is not stopped and latched at a quarter edge. F2: after a run edge the loop is held at E until the meter shows the step (EDGE_HOLD_S, longer while the battery still moves). The replay gained a lag model (dead time, reading age, P1 debounce, 1 s cycles) that shows TEST-23's overshoot without the hold. F3: a charge refuser's SAFETY-73 probe inside a cheap run is a charger pinned at PROBE_W, the others rest, so the probe actually runs. Modes off stays byte-identical to 5a4cdc2 (new late-P1 identity scenarios). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-09-29 20:22:32 +02:00