UX-10 review: the line as logged gets the red-alarm shape, clamp lines at 30 words, plain HA 400

Part 6 checked the quoted reason alone, so title + reason + tails logged
as 4+ sentences. It now also checks the whole line (at most 3 sentences,
none over 30 words); 25 lines failed and are rewritten (one-sentence
wrappers, two-sentence circulation and peak reasons, STALE_READING's
fixed limits on a DEBUG line). The clamp lines for one inverter are
pinned at 30 words with OUTPUT_CLAMP and the numbers kept. Home
Assistant's bare '400: Bad Request' while it loads becomes one plain
line; still WARNING, throttled, a failed write.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

goodwe_controller/test_clamp.py

@@ -2039,7 +2039,7 @@ check("defect 2: the integrator accumulator is not printed as a request",
       wind and all(f"{d.i_w:+.0f} W" not in r and "asked for" not in r
                    for d, t, r in wind))
 check("the command quoted is that tick's Decision, not a later read",
-      wind and all(f"command this cycle was {d.target_w:+.0f} W" in r
+      wind and all(f"command now {d.target_w:+.0f} W" in r
                    for d, t, r in wind))
 check("at the bound nothing is described as 'above' or 'over' the rating",
       wind and all(" above " not in r and " over " not in r
@@ -2072,18 +2072,18 @@ for d, t, r in over[:2]:
 check("PRECONDITION: the output clamp engaged on a tick where the slew limit "
       "rewrote the command AND the integrator differs from the request",
       any(t != _f(d, 'clamped_w') and d.i_w != _f(d, 'requested_w') for d, t, r in over))
-check("the over-rating says it went over the rating",
-      over and all(" rating, and cut it back to " in r for d, t, r in over))
+check("the over-rating says it was cut to the rating",
+      over and all(" W rating, command now " in r for d, t, r in over))
 check("defect 2: it quotes the requested COMMAND of that tick, not i_w",
       over and all(f"computed {_f(d, 'requested_w'):+.0f} W" in r for d, t, r in over))
-check("defect 3: 'cut it back to' is the clamp's own result, not self.target",
-      over and all(f"cut it back to {_f(d, 'clamped_w'):+.0f} W" in r
+check("defect 3: 'cut to' is the clamp's own result, not self.target",
+      over and all(f"cut to the {_f(d, 'clamped_w'):+.0f} W rating" in r
                    for d, t, r in over))
 check("...and its ERROR says it is a software fault and that control keeps "
       "running (UX-08 2d moved the 14 768 W rationale to a DEBUG line beside "
       "it, which is still in main.py)",
       any(x.levelno == logging.ERROR and "software fault" in x.getMessage()
-          and "Control is still running" in x.getMessage() for x in log_o)
+          and "control runs on" in x.getMessage() for x in log_o)
       and "reached 14 768 W on this project" in
       open(os.path.join(os.path.dirname(os.path.abspath(__file__)), "app",
                         "main.py"), encoding="utf-8").read())