TEST-06: close the three gaps that survived SAFETY-18's suite green

None of the three is a bug in the shipped code. They are gaps in what the
suite could detect, and the next person to touch freeze.py had less
protection than the passing count implied.

1. WHERE check_meter_frozen() runs in cycle(). Moving it to the top left
   the whole file green. Pinned by CONSEQUENCE, not by source order, so a
   refactor that keeps the semantics stays green:
     - the alarm must land on the SAME cycle the command reaches the rail
       (at the top it grades the previous command against this cycle's
       meter and arrives a cycle late);
     - the dead-poll-task composition: poll task dies, stale_input_s is
       crossed, the arbiter commands 0 W, and on THAT cycle the alarm is
       already clear - because the detector ran after the 0 W write.
   wired() now returns a per-cycle trace, which is what makes "on which
   cycle" an observation rather than a hope.

2. The NOT COVERED status row. The old check only asserted that an
   uncovered transport is SILENT, which a page claiming `armed` on a guard
   that cannot run also satisfies. The string is now asserted in both
   directions: the uncovered row must say NOT COVERED, name the
   meter_source and homewizard_local, and warn; the covered row must still
   say armed, or "does not say armed" would be satisfied by deleting the
   armed branch.

3. meter_freeze_s. Pinned in test_validate.py by MAINT-04's regex
   technique (no PyYAML in the image), and in test_freeze.py by its
   consequences: the shipped value drives the replays, must stay inside
   the 900 s billing quarter, and 3600/hold_s must stay inside the shipped
   deadband. A Controller built with the key ABSENT must land on the same
   number, which pins main.py's fallback without touching CFG-03.

All three demonstrated red before being accepted green, and every new
check was mutated to confirm it can fail; one candidate assertion ("no new
notification while parked at 0 W") was DELETED because no mutation could
break it, and replaced by the exact notification count across a revived
transport, which can.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015VXjA3LWccN1rJsk3okyPC

goodwe_controller/test_validate.py

@@ -253,6 +253,61 @@ check("...and the shipped charge rate is at or under the shipped ceiling",
 check("...and the shipped discharge rate too, so it warns about nothing",
       _shipped["maintenance_discharge_w"] <= _shipped["max_w"])
 
+# --------------------------------------------------------------------------- #
+print("the shipped meter_freeze_s, pinned (TEST-06 / AC3)")
+# ⚠️ WHY A NUMBER GETS ITS OWN CHECK. `meter_freeze_s: 300` is the threshold
+# SAFETY-18's entire argument is about, and before this it was pinned NOWHERE:
+# 300 -> 3600 left test_freeze.py AND this file green, because the schema
+# accepts int(60,3600) and no check ever read the shipped value. The schema
+# bounds what is CONFIGURABLE; this pins what is SHIPPED, which is a different
+# question and the one the docs answer.
+#
+# Read by regex like _shipped above, for the same reason: no PyYAML in the
+# image, and a check that skips on ImportError is not a check.
+_freeze_s = [float(v) for v in re.findall(
+    r"^  meter_freeze_s: (\d+(?:\.\d+)?)\s*$", _txt, re.M)]
+_freeze_schema = re.findall(r"^  meter_freeze_s: int\((\d+),(\d+)\)\s*$",
+                            _txt, re.M)
+check(f"config.yaml carries exactly one meter_freeze_s default {_freeze_s}",
+      len(_freeze_s) == 1)
+check("...and exactly one schema range for it", len(_freeze_schema) == 1)
+_hold_s = _freeze_s[0] if _freeze_s else None
+_lo, _hi = ((float(_freeze_schema[0][0]), float(_freeze_schema[0][1]))
+            if _freeze_schema else (None, None))
+check("the shipped meter_freeze_s is still the measured 300 s that freeze.py, "
+      "config.yaml's own comment and test_freeze.py are all written at",
+      _hold_s == 300.0)
+check(f"...and it is inside its own schema range ({_lo}-{_hi} s)",
+      None not in (_lo, _hi, _hold_s) and _lo <= _hold_s <= _hi)
+
+# The two properties the number has to have, DERIVED rather than restated - so
+# they go red on a value that is merely schema-legal. Both come straight from
+# config.yaml's own comment on the key.
+#
+#   upper: the alert must land inside the 900 s quarter that bills the capacity
+#          tariff, or the notification arrives after the money is spent;
+#   lower: the slowest a HEALTHY meter can tick a 1 Wh register and still look
+#          unchanged for hold_s is 3600/hold_s W, and that must stay inside the
+#          deadband or the conjunction's two terms stop being mutually
+#          exclusive (freeze.py, "WHERE hold_s COMES FROM").
+_QUARTER_S = 900.0
+_shipped_deadband = [float(v) for v in re.findall(
+    r"^  deadband_w: (\d+(?:\.\d+)?)\s*$", _txt, re.M)]
+check(f"config.yaml carries exactly one deadband_w default {_shipped_deadband}",
+      len(_shipped_deadband) == 1)
+_db = _shipped_deadband[0] if _shipped_deadband else None
+_slowest_healthy_w = 3600.0 / _hold_s if _hold_s else None
+print(f"    shipped meter_freeze_s {_hold_s} s: alert inside the "
+      f"{_QUARTER_S:.0f} s billing quarter, and a healthy meter slow enough to "
+      f"look unchanged for it is {_slowest_healthy_w} W against a "
+      f"{_db} W deadband")
+check(f"...the alarm still lands inside the {_QUARTER_S:.0f} s billing quarter",
+      _hold_s is not None and _hold_s < _QUARTER_S)
+check("...and a healthy meter that looks unchanged for it is still inside the "
+      "deadband, so the two terms stay mutually exclusive",
+      _slowest_healthy_w is not None and _db is not None
+      and _slowest_healthy_w < _db)
+
 # --------------------------------------------------------------------------- #
 print("the KNOWN cross-file default divergence, pinned rather than commented")
 # ⚠️ WHAT THIS GUARDS, AND WHY IT ASSERTS THE BUG RATHER THAN THE FIX.