UX-13 P4: the setup wizard for installers

The Setup tab draws the Installer view's page model one step at a time,
from each field's `wizard` step in app/uilayout.py: meter (with the kettle
test), inverters and batteries, solar (optional), prices, peak limit
(battery modes: "comes in a later update", OPT-11), check and start.
It reuses P2's controls and saves through /config/validate and
/config/save. No route was added.

- First run: /config/model says `setup_needed` when the stored options name
  no power request entity, or on a new install (no `setup_done` and no
  `auto` in the Store, control not started). The page opens #setup only
  when opened with no route. The wizard's save writes `setup_done`.
- Kettle test: GET ha/entities?entity= reads one entity now, in W. The
  change decides: up keeps meter_invert off, down turns it on; a net or
  import/export meter that goes down blocks the step with what to check.
- Last step: validate.setup_checks() beside the refusals: the meter reads,
  each power request entity exists in HA (bad if not, SAFETY-77), battery
  levels and power with direction, solar sign, prices. Saves with
  shadow_mode on by default, then a confirmed restart naming the 0 W.
- P2 test finding (a): a stale save lists only the keys the other surface
  moved (the blob handed out on open, by fingerprint, against stored now).
- test_setup.py; tools/ux13_wizard_blobs.py makes the 88 blobs the wizard
  can save; all accepted by Supervisor 2026.08.0 AppOptions (offline).
- DECISIONS/UX-13-setup-wizard.md; DOCS "Setup, for a new install".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LyR88rXETvwhTgx6yHE39p

goodwe_controller/app/ui_text/en.json

@@ -80,8 +80,7 @@
     "toast": {"started": "Control started.", "stopped": "Control stopped.", "done": "Done.", "failed": "That did not work. Try again."},
     "offline": {"name": "Cannot reach the add-on", "description": "The page tries again every 3 seconds."},
     "batteries": {"name": "Batteries", "description": "Battery modes and on and off switches arrive in a later update.", "level": "Level", "now": "Now", "stored": "Stored", "mode": "Mode", "settings": "Change inverter settings"},
-    "settings": {"name": "Settings", "description": "The settings are grouped by task below.", "open": "Open the settings page"},
-    "setup": {"name": "Setup", "description": "The setup steps arrive in a later update, so use the settings page for now."}
+    "settings": {"name": "Settings", "description": "The settings are grouped by task below.", "open": "Open the settings page"}
   },
   "choices_later": {
     "region": {"wallonia": "Wallonia, no preset yet", "brussels": "Brussels, no preset yet"}
@@ -148,7 +147,7 @@
       "blocked": {"description": "Fix the settings marked in red, then save again."},
       "restarting": {"description": "Restart requested, so this page stops answering for a moment."}
     },
-    "tier": {"bad": "Must fix", "warn": "Check this", "info": "Note"},
+    "tier": {"bad": "Must fix", "warn": "Check this", "info": "Note", "ok": "Passed"},
     "derive": {
       "raw_roster": {"description": "This inverter list can only be changed in the Configuration tab."},
       "no_inverter": {"description": "Add at least one inverter."},
@@ -157,6 +156,59 @@
       "custom_profile": {"description": "Other time windows can only be changed in the Configuration tab."},
       "no_price": {"description": "Enter a price per kWh."},
       "unknown": {"description": "The page cannot store this choice, so reload the page."}
+    },
+    "setup": {
+      "name": "Setup",
+      "description": "For installers: six steps to a working site, and each can be changed later under Settings.",
+      "done_before": {"description": "This site is set up already, so a change here replaces its stored settings."},
+      "step": "Step {n} of {total}",
+      "back": "Back",
+      "next": "Next",
+      "skip": "Next, or skip",
+      "finish": "Save and restart",
+      "not_now": "Not now",
+      "steps": {
+        "1": {"name": "Your meter", "description": "The add-on steers the grid reading to zero, so it needs your meter first."},
+        "2": {"name": "Inverters and batteries", "description": "One card for each inverter with a battery, with its entities in Home Assistant."},
+        "3": {"name": "Solar", "description": "Optional, so skip this step if the add-on should not record solar production."},
+        "4": {"name": "Prices", "description": "What you pay per kWh, so the batteries can charge when power is cheap."},
+        "5": {"name": "Peak limit", "description": "The grid stays under this limit, averaged over each 15-minute period."},
+        "6": {"name": "Check and start", "description": "The add-on checks everything with its own start checks, then restarts."}
+      },
+      "modes_later": {"description": "Choosing a mode for each battery comes in a later update."},
+      "kettle": {
+        "name": "Check the direction",
+        "description": "Read the meter, switch on a kettle, then read the meter again.",
+        "read": "Read the meter",
+        "again": "Read again",
+        "skip": "Skip this test",
+        "before": {"description": "The meter reads {w} now, so switch on a kettle and press Read again."},
+        "unread": {"description": "The meter cannot be read now, so check the entity and try again."},
+        "none": {"description": "The reading moved only {d}, so switch the kettle on and read again."},
+        "ok": {"description": "Good, the reading went up by {d} when the kettle came on."},
+        "flip": {"description": "The reading went down by {d}, so the add-on flips its sign for you."},
+        "wrong_signed": {"description": "The reading went down by {d}, so choose “One grid power entity” above, which can flip it."},
+        "wrong_dsmr": {"description": "The reading went down by {d}, so check that import and export are not swapped."},
+        "self": {"description": "The add-on reads this meter itself, so Home shows its direction after the restart."},
+        "skipped": {"description": "The meter direction is not tested, so check it on Home after the restart."},
+        "tested": {"description": "The meter direction was tested with a kettle."},
+        "needed": {"description": "Do the kettle test first, or skip it."}
+      },
+      "check": {
+        "name": "What the add-on checked",
+        "running": {"description": "Checking with the add-on's own start checks."},
+        "pass": {"description": "The add-on's start checks pass."},
+        "failed": {"description": "The check did not run, so try again."},
+        "again": "Check again",
+        "blocked": {"description": "Fix the items marked in red, then check again."}
+      },
+      "shadow": {"name": "Start in shadow mode", "description": "Recommended, because every inverter then stays at 0 W until you turn shadow mode off under Settings."},
+      "dialog": {"name": "Save and restart?", "description": "Every inverter is set to 0 W while the add-on restarts, and shadow mode keeps them at 0 W after that.", "yes": "Save and restart"},
+      "dialog_live": {"name": "Save and restart?", "description": "Every inverter is set to 0 W while the add-on restarts, and then the new settings apply.", "yes": "Save and restart"},
+      "done": {"name": "Setup is done", "description": "The add-on restarts in shadow mode now, so open Home in a minute to see what it would do."},
+      "done_live": {"name": "Setup is done", "description": "The add-on restarts now, so open Home in a minute to start control."},
+      "restart_failed": {"name": "Saved, not running yet", "description": "The restart did not go through, so press Restart now to apply the settings."},
+      "home": "Open Home"
     }
   }
 }