OPT-04: charge cheap, discharge expensive - and only when it pays
checks / unit (pull_request) Successful in 3m16s
checks / unit (pull_request) Successful in 3m16s
Four cards built the price stack and nothing traded on it. app/arbitrage.py is §10.1's priority 3, and it consumes all four rather than re-deciding anything: whether a trade is permitted at all, on which two hours, against which widened threshold is TariffPlan.arbitrage()'s answer, and that answer cannot be obtained without first saying whether the peak guard is holding. §9.1's "peak shaving outranks arbitrage" is therefore honoured structurally - there is no path to a spread that skips the question - and again in the arbiter, where P_PEAK (50) clamps a claim filed at P_ARBITRAGE (30). A guard that never ran is not a guard that is clear. On meter_source off the peak guard is never evaluated; that third state is carried as None and refuses, because charging at the rail creates the billed quantity while nothing measures the quarter. validate.py refuses that configuration too, along with arbitrage armed with no price source and a SoC floor at or above the ceiling. §17: never export into a negative price. The guard is on the hour being sold into, not on the spread - a day priced -0.30 .. -0.05 clears any threshold and its dearest hour is still negative. Buying in a negative hour stays allowed. resolve_tariff() may open an HTTPS connection and the tick feeds the ESP32 heartbeat, so the fetch runs in its own task at a 30 min cadence and the tick reads an attribute and an age bound. test_arbitrage.py section 8 asserts that structurally on the shipped AST: a fetch put back on cycle() is red. AC4 is NOT met and is not restated - this repository holds no price history. Section 7 replays a synthetic year and asserts the property that does not need real prices: every executed round trip cleared its own widened requirement, and zero discharges landed in the 522 negative-priced hours. At the shipped 0.10 EUR/kWh threshold a realistic Belgian day/night site does not trade at all. Reported, not tuned: that number and FCST-03's widening factors are one product decision and it is the owner's. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015VXjA3LWccN1rJsk3okyPC
This commit is contained in:
co-authored by
Claude Opus 5
parent
a30bde1ab1
commit
bdd7f18a54
@@ -240,6 +240,38 @@ options:
|
||||
# a second series: no shipped supplier publishes a dynamic injection curve.
|
||||
export_price_eur_kwh: 0.04
|
||||
|
||||
# --- price arbitrage (OPT-04, specs §10.1 priority 3 / §17) ---------------
|
||||
# Charge in the cheapest published hour, discharge in the dearest, and ONLY
|
||||
# when the spread covers what the round trip costs. Off in the shipped
|
||||
# configuration: this is the first strategy in the add-on that moves energy
|
||||
# against the meter on purpose, so it is armed deliberately or not at all.
|
||||
#
|
||||
# ⚠️ IT NEEDS A PRICE SOURCE AND A P1 METER, and validate.py refuses the
|
||||
# combinations that cannot work rather than letting them look armed. With
|
||||
# `price_provider: off` and no `static_profile` there is no series to trade
|
||||
# on; with `meter_source: off` the capacity-tariff peak guard never runs, and
|
||||
# §9.1 puts peak shaving above arbitrage - a charge nothing measures is the
|
||||
# exact failure that guard exists to prevent.
|
||||
#
|
||||
# ⚠️ AT THE SHIPPED THRESHOLD A STATIC DAY/NIGHT SITE DOES NOT TRADE. The
|
||||
# realistic Belgian day/night spread is about 0.08 EUR/kWh and the threshold
|
||||
# below is 0.10, so the verdict is "the firm spread does not cover this
|
||||
# cycle's cost" and nothing happens - correctly. That is a product decision
|
||||
# (this number, and app/price.py's widening factors) and it is open with the
|
||||
# owner; the code is correct at any value and no number was picked to make a
|
||||
# trade appear.
|
||||
arbitrage_enabled: false
|
||||
# §10.1's `cycle_cost_threshold_eur`: what one full round trip costs per kWh
|
||||
# - the wear on the pack plus the conversion losses. A spread below this is
|
||||
# a cycle that loses money and pack life, so it is not taken.
|
||||
cycle_cost_threshold_eur: 0.10
|
||||
# The reserve arbitrage may not spend, and the headroom it may not overfill.
|
||||
# Deliberately NOT the maintenance_soc_* keys: those describe a monthly
|
||||
# balancing cycle, and pointing a trading strategy at them would couple two
|
||||
# unrelated policies through one number.
|
||||
arbitrage_soc_floor: 20
|
||||
arbitrage_soc_ceiling: 95
|
||||
|
||||
# --- site ------------------------------------------------------------------
|
||||
estop_fitted: false
|
||||
log_level: info
|
||||
@@ -337,5 +369,15 @@ schema:
|
||||
# bottoms out at 0 would make that site inexpressible.
|
||||
export_price_eur_kwh: float(-1,1)
|
||||
|
||||
# OPT-04. ⚠️ The threshold's lower bound is 0 and not negative: it is a COST,
|
||||
# and a negative one is a threshold every spread clears - arbitrage with the
|
||||
# brake removed. app/arbitrage.py refuses it in code too, because
|
||||
# validate_startup_config() is also sim/inject.py's entry point and can be
|
||||
# handed any dict at all.
|
||||
arbitrage_enabled: bool
|
||||
cycle_cost_threshold_eur: float(0,1)
|
||||
arbitrage_soc_floor: int(5,95)
|
||||
arbitrage_soc_ceiling: int(10,100)
|
||||
|
||||
estop_fitted: bool
|
||||
log_level: list(trace|debug|info|warning|error)
|
||||
|
||||
Reference in New Issue
Block a user