Merge release/1.0 (SAFETY-81, #155) into opt11-p4-solar-forecast

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

goodwe_controller/DOCS.md

@@ -1752,7 +1752,8 @@ control action and goes to the action log and the status page. A *saturated*
 guard — asking for everything the inverter has while the quarter is still
 projected over — raises one notification (`goodwe_peak_saturated`), because that
 is the one state where the money will be spent and shedding load is the only
-thing left that changes the bill.
+thing left that changes the bill. SAFETY-81 keeps a 1 s meter spike, noise and
+a quarter's last seconds from raising it: see `peakguard.load_too_high()`.
 
 **And it sizes a price-driven charge, not only a forced discharge (SAFETY-45).**
 The same arithmetic read the other way answers *"how hard may this site charge
@@ -3224,9 +3225,12 @@ reason code `OUTPUT_CLAMP`.
 **Load too high for battery.** The capacity-peak guard (SAFETY-07) asks for
 everything the inverter can discharge and the running 15-minute average is
 still projected over the peak limit, so the month's billed peak
-(capaciteitstarief) goes up. In shadow mode the guard's projection is made on a
-plant that did not respond (SAFETY-47), and the text says so. See *The
-capacity-peak guard*.
+(capaciteitstarief) goes up. It fires only when, for 10 s, the period would
+still end more than 10 W over the real limit (not the margin's aim) with the
+battery at full power. It notifies at most once per period; later overloads
+in the same period go to the log (SAFETY-81). In shadow mode the
+guard's projection is made on a plant that did not respond (SAFETY-47), and
+the text says so. See *The capacity-peak guard*.
 
 **Battery stopped limiting the peak.** The peak guard may not discharge below
 `peak_soc_floor` (label “Peak reserve”, SAFETY-24). It also stops when the