TEL-14: PV sign declared per entity (pv_invert_entities)

Some PV entities (kWh meters, ESPHome clamps in the PV circuit) read positive
for consumption and negative for production. `pv_invert_entities` lists the
ones to flip; the flip is applied per member inside pv.total(), before the sum,
so the MQTT `pv` row and the status page carry the corrected figure. Default []
is byte-identical to 0.12.0.

Shape measured in supervisor_shape_probe.py section H (Supervisor 2026.08.0):
a parallel list validates the 0.12.0 blob unchanged and renders as its own
translated repeatable field; dicts on pv_entities refuse 0.12.0's stored
strings; a prefix is invisible syntax; a global bool cannot describe a mixed
roster. Status page marks flipped entities and cautions per entity below
-50 W, saying ADD or REMOVE. Telemetry only: control documents unchanged.

Record: DECISIONS/TEL-14-pv-sign.md (reverses TEL-11 section 2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BwRLw7eKYj2byVdwB6kbjU

goodwe_controller/app/pv.py

@@ -50,21 +50,10 @@ SITE figure, and it publishes as an absence. A partial sum is a second way of
 reporting 0-where-there-was-production, one layer up, and it is refused for the
 same reason.
 
-THE SIGN CONVENTION: POSITIVE IS PRODUCTION. Derived from the two conventions
-this add-on already ships rather than assumed:
-
-    `meter_entity`   positive = IMPORTING from the grid   (DOCS.md, Sources)
-    `batt_entity`    positive = DISCHARGING the pack      (DOCS.md, Sources)
-
-Both are "positive = power arriving at the house's AC bus", and production
-arrives there too. There is deliberately NO `pv_invert` to go with
-`meter_invert` and `batt_invert`: those two quantities are BIPOLAR and are READ
-BY THE CONTROL PATH - a reversed `batt_entity` feeds SAFETY-30's per-unit sign
-check and SAFETY-31's circulating-power sensor with a plausible number the site
-then acts on - whereas production is unipolar and is read by nothing. A reversed
-PV sensor announces itself as -4 kW at noon in the very history this card
-creates, and flipping it here would only hide it. See
-`DECISIONS/TEL-11-pv-production.md` §2.
+THE SIGN CONVENTION: POSITIVE IS PRODUCTION, as for `meter_entity` and
+`batt_entity` ("power arriving at the house's AC bus"). TEL-14: a kWh meter or
+power clamp in the PV circuit reads the other way, so `pv_invert_entities`
+flips the sign per entity. See `DECISIONS/TEL-14-pv-sign.md`.
 """
 
 from .hass import BAD_STATES
@@ -193,7 +182,28 @@ def entity_is_ignored(opts: dict) -> bool:
                      if str(x or "").strip()])
 
 
-def total(readings) -> tuple:
+def inverted(opts: dict) -> frozenset:
+    """The entity ids `pv_invert_entities` flips. TEL-14."""
+    return frozenset(e for e in (str(x or "").strip()
+                                 for x in (opts.get("pv_invert_entities") or []))
+                     if e)
+
+
+def stray_inverts(opts: dict) -> list:
+    """`pv_invert_entities` entries naming no entity in the roster - a typo
+    that would otherwise leave a sign unflipped with nothing said. TEL-14."""
+    roster = set(entities(opts))
+    return sorted(e for e in inverted(opts) if e not in roster)
+
+
+# TEL-14: a reading below this is not standby draw. A correctly signed meter in
+# the PV circuit reads a few watts NEGATIVE at night (the owner's: 13 W); -50 W
+# clears that with room for a couple of such devices on one entity, while a
+# reversed sensor in daylight reads hundreds to thousands of watts below zero.
+NEGATIVE_W = -50.0
+
+
+def total(readings, flip=frozenset()) -> tuple:
     """`(watts, why, parts)` - the SITE's production, or an ABSENCE. TEL-12.
 
     `readings` is `[(entity_id, state), ...]` in `entities()` order, one entry
@@ -237,8 +247,13 @@ def total(readings) -> tuple:
     site: shading, a tripped string and nightfall are all real 0s, and a roster
     that went to `unknown` whenever one member read zero would report an absence
     on every clear evening and defeat the channel from the other end.
+
+    ⚠️ TEL-14: `flip` is `inverted(opts)`; each member's sign is applied HERE,
+    before the sum, so every surface reads the corrected figure. `0.0 - w`
+    rather than `-w`, so a flipped 0 W is `0.0` and never `-0.0` on the wire.
     """
-    parts = [(ent, *watts(st)) for ent, st in readings]
+    parts = [(ent, w if w is None or ent not in flip else 0.0 - w, why)
+             for ent, (w, why) in ((e, watts(st)) for e, st in readings)]
     if not parts:
         # No roster. `Controller` does not call this in that state - the gate is
         # `pv_roster` - but a reader of `parts` should never have to wonder.