EV-03 round 2: a missing car power is unknown, and mode3 E/F has a state
checks / unit (pull_request) Successful in 26m50s
infra-pin / fresh (pull_request) Successful in 2s

- CarTracker.car_w returns None when the current reading carries no power
  (power entity unavailable or in a non-power unit); it can no longer raise
  into the control cycle, /status or the MQTT values.
- mode3 E and F are the card state "fault" (EN and NL).
- chargersim gains fault().

Co-Authored-By: Claude <noreply@anthropic.com>
This commit is contained in:
ev03-dev
2026-11-15 12:02:17 +01:00
co-authored by Claude
parent 984f4335a0
commit 678ea13895
6 changed files with 126 additions and 12 deletions
+3 -2
View File
@@ -301,8 +301,8 @@
"warning": "See Needs attention below."
},
"car": {
"state": {"charging": "Charging", "waiting": "Connected, waiting", "none": "No car connected", "full": "Car is full", "unreach": "Charger not reachable", "setup": "Charger not set up", "wait": "No reading yet"},
"big": {"waiting": "Connected, not charging.", "none": "Nothing to charge.", "full": "The car is full.", "seen": "Last seen at {t}.", "no_reading": "No reading.", "setup": "Not set up.", "wait": "No reading yet."},
"state": {"charging": "Charging", "waiting": "Connected, waiting", "none": "No car connected", "full": "Car is full", "unreach": "Charger not reachable", "setup": "Charger not set up", "fault": "Charger fault", "wait": "No reading yet"},
"big": {"waiting": "Connected, not charging.", "none": "Nothing to charge.", "full": "The car is full.", "seen": "Last seen at {t}.", "no_reading": "No reading.", "setup": "Not set up.", "fault": "The charger reports a fault.", "wait": "No reading yet."},
"phase_one": "1 phase",
"phase_many": "{n} phases",
"today": "{kwh} charged today.",
@@ -316,6 +316,7 @@
"not_found": "The add-on cannot find the charger. Check the current setting entity in Settings.",
"limit": "The charger limit is above what the charger allows. Lower it in Settings.",
"name": "The current setting entity does not fit the charger. Check it in Settings.",
"fault": "The charger reports a fault. Check it at the charger itself.",
"wait": "Waiting for the first reading."
}
},