SAFETY-94: a healthy battery that lags or reverses is not flagged as frozen or refusing

The stale-reading gate counted its 35 s from the register's last change, so
after a rest the first read after a new command tripped it (SAFETY-58; live
2026-10-03, four trips 1 s after the command). It now counts only the time
the command asked the register to move.

At N=1 the refusal engaged after 12 frozen cycles if the reading was under
100 W at that moment, which a battery reversing through its lag passes at a
1 s meter. The refusal now needs the N>1 evidence at every roster size: under
100 W, one way, for 12 cycles spanning 22 s, restarting when the reading
moves 50 W towards the ask.

DECISIONS/SAFETY-94-lagging-battery.md; test_safety94.py.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

goodwe_controller/test_clamp.py

@@ -439,7 +439,7 @@ class _Hass:
         return True
 
 
-def wired(grid, cycles=40, batt=0.0, track=True, **over):
+def wired(grid, cycles=40, batt=0.0, track=True, tick=None, **over):
     async def go():
         hass = _Hass(grid, batt=batt, track=track)
         c = Controller(dict(
@@ -455,8 +455,11 @@ def wired(grid, cycles=40, batt=0.0, track=True, **over):
         # hysteresis clears it a few cycles later - so it is captured live
         # rather than looked for after the run, when it is correctly gone.
         c.red_snapshot = []
-        for _ in range(cycles):
-            await c.read_inputs()
+        for i in range(cycles):
+            # `tick`: simulated seconds per cycle. SAFETY-94: a refusal needs
+            # its evidence to span REFUSED_SPAN_S, which back-to-back cycles
+            # on the real clock never do.
+            await c.read_inputs(now_mono=None if tick is None else i * tick)
             await c.cycle()
             if c.clamp_wd.active and not c.red_snapshot:
                 c.red_snapshot = c.checks()
@@ -474,7 +477,7 @@ def clamp_notes(hass):
 # unclamped integrator climbed ~130 W per 4 s to over 10 kW and, pinned at the
 # 5 kW rail, reported 14 768 W." `track=False` is the inverter switched off: it
 # reports 0 W however hard it is commanded, so the error never closes.
-hass_r, ctl_r = wired(6000.0, cycles=60, track=False)
+hass_r, ctl_r = wired(6000.0, cycles=60, track=False, tick=2.0)
 emitted = [abs(w) for w in hass_r.writes]
 
 # What the SAME error would have done to an accumulator with no bound - the