Release 0.23.0: CHANGELOG review wording fixes
- MAINT-28: say the hold is for two inverters (the code gates it on N >= 2). - EV-03: "no longer buy energy for the car" (the profile is a 7-day median). - TEL-19: plain wording for the PV sensor point. - Known issues: add TEL-20 (DOCS names a car sensor id HA does not create). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
co-authored by
Claude Opus 5.5
parent
e3cce25cb0
commit
568230c422
@@ -2,12 +2,12 @@
|
||||
|
||||
## 0.23.0
|
||||
|
||||
**A minor bump: the add-on can now read a car charger (Alfen, through Home Assistant), and a maintenance charge stays calm during a real peak. Four new options were added, all with defaults, and none needs setting.**
|
||||
**A minor bump: the add-on can now read a car charger (Alfen, through Home Assistant), and with two inverters a maintenance charge stays paused during a real peak. Four new options were added, all with defaults, and none needs setting.**
|
||||
Four options were added (`ev_charger`, `ev_current_entity`, `ev_max_a` and `ev_phases`), none was removed or renamed, and no default changed (90 options, 86 before). **Existing installs need no option change:** the new options have defaults, and `ev_charger` is off, so an install that sets none of them runs as 0.22.0 did. It is a minor bump because it adds a feature and new options; every saved setting still starts.
|
||||
|
||||
**A car charger can be read.** The add-on can now read an Alfen charger through its Home Assistant integration. Home gets a *Car* card that shows whether a car is connected, its power and today's energy. The car's power is left out of the House tile and out of what the batteries plan for the night, so they no longer buy energy for a car that charged last night. The page shows a note when something else changes the charger, and three sensors go to Home Assistant. It is off until you choose a charger in Settings. **The add-on never changes the charger in this version.** The peak limit works as before: the car still counts in what the grid meter sees. See "Car charger" in DOCS ([[EV-03]]).
|
||||
**A car charger can be read.** The add-on can now read an Alfen charger through its Home Assistant integration. Home gets a *Car* card that shows whether a car is connected, its power and today's energy. The car's power is left out of the House tile and out of what the batteries plan for the night, so they no longer buy energy for the car. The page shows a note when something else changes the charger, and three sensors go to Home Assistant. It is off until you choose a charger in Settings. **The add-on never changes the charger in this version.** The peak limit works as before: the car still counts in what the grid meter sees. See "Car charger" in DOCS ([[EV-03]]).
|
||||
|
||||
**A maintenance charge stays paused in a real peak.** During a real peak, a battery in its maintenance charge now stays paused instead of switching between charging and giving, and the batteries give only what the peak guard needs. In one rig test, with a 6.5 kW load for 90 minutes, that battery switched 0 times, against 325 to 385 times on 0.22.0. The night charge was the same as before ([[MAINT-28]]).
|
||||
**A maintenance charge stays paused in a real peak.** With two inverters, during a real peak, a battery in its maintenance charge now stays paused instead of switching between charging and giving, and the batteries give only what the peak guard needs. In one rig test, with a 6.5 kW load for 90 minutes, that battery switched 0 times, against 325 to 385 times on 0.22.0. The night charge was the same as before ([[MAINT-28]]).
|
||||
|
||||
**No change in behaviour:** a peak-guard test no longer fails when the build machine is busy, and the test runs are quicker.
|
||||
|
||||
@@ -15,7 +15,7 @@ Contents of this release, in merge order since 0.22.0 (`b700c0b`):
|
||||
|
||||
| | |
|
||||
|---|---|
|
||||
| `6c0546b` | During a real peak, a battery in its maintenance charge stays paused instead of switching between charging and giving, and the batteries give only what the peak guard needs. This was taken out of 0.22.0 and is back, fixed ([[MAINT-28]], #248) |
|
||||
| `6c0546b` | Two inverters: during a real peak, a battery in its maintenance charge stays paused instead of switching between charging and giving, and the batteries give only what the peak guard needs. This was taken out of 0.22.0 and is back, fixed ([[MAINT-28]], #248) |
|
||||
| `6bf3759` | A peak-guard test no longer fails when the build machine is busy. It is a test only, so there is no change in behaviour ([[CI-17]], #252) |
|
||||
| `7513fd9` | The add-on can read an Alfen car charger through Home Assistant: a *Car* card on Home, the car's power left out of House and out of the batteries' night plan, a note when something else changes the charger, and three Home Assistant sensors. It is off by default, and the add-on never changes the charger in this version ([[EV-03]], #253) |
|
||||
| `5fc92cf` | The test runs are quicker: a developer can run only the tests a change reaches, the longest test files are split, and ten run at a time. It touches the build and tests only, so there is no change in behaviour ([[CI-18]], #254) |
|
||||
@@ -107,8 +107,9 @@ Contents of this release, in merge order since 0.22.0 (`b700c0b`):
|
||||
- A grid charge at full power in the last seconds of a 15-minute period can run into the next period, where the peak guard cuts it back ([[SAFETY-139]]).
|
||||
- In a long real peak, the peak guard can end a 15-minute period up to 10 W over its aim, as 0.22.0 does (up to 31 W there). In a rig test the month's highest peak did not rise ([[SAFETY-141]]).
|
||||
- The peak reserve notification can be created again and again, 24 to 47 times in 2 hours in a rig test, while the guard holds a battery at its reserve. 0.22.0 does the same ([[MAINT-29]]).
|
||||
- When you switch the car charger off, its three sensors stay in Home Assistant with their last values. The PV power sensor should do the same when it is switched off; this comes from reading the code ([[TEL-19]]).
|
||||
- When you switch the car charger off, its three sensors stay in Home Assistant with their last values. From reading the code, the PV power sensor does the same when it is switched off ([[TEL-19]]).
|
||||
- In Settings, the choice for no car charger says "None", while its help says "Off" ([[UX-81]]).
|
||||
- DOCS names the car's energy sensor `goodwe_car_today_kwh`, but Home Assistant creates it as `sensor.goodwe_car_energy_today` ([[TEL-20]]).
|
||||
|
||||
### If you are crossing from a version older than 0.10.0
|
||||
|
||||
|
||||
Reference in New Issue
Block a user