TARIFF-17: a price component that varies by hour has somewhere to live

`price.py` modelled the whole non-energy part of a Belgian bill as ONE flat
scalar. This adds `price_taxes_profile`, which carries the TAXES component as
a period table, and makes `assemble()` evaluate it at each point's own instant.

⚠️ THE FLAT SCALAR WAS NOT A WRONG NUMBER, AND THIS IS NOT A CORRECTION OF ONE.
The optimiser reads exactly two quantities off a series - the spread
`max - min` over the firm points, and which hour is cheapest - and an additive
constant identical in every hour cancels out of the first and leaves the second
where it was. It is provably inert. Measured, and printed by test_price.py 16b
on every run: with a flat taxes figure of 0.00, 0.0739, 0.1198, 0.1327 or 1.00
EUR/kWh the same 24-hour feed is cheapest at 13:00 in all five cases and its
spread is 0.1500 EUR/kWh in all five cases. What was missing is anywhere for an
HOUR-VARYING non-energy component to live. This is a missing capability, not a
bad constant.

Belgium has one. Fluvius distribution is a single rate - its tariff-card row
reads `Normaal | Uitsl. nacht`, where exclusive night is a separate physical
circuit and not a night register - so nothing changes for the reference site in
Flanders. The Walloon DSOs and Sibelga are on the same card with four columns,
`Enkelvoudig | Dag | Nacht | Uitsl. nacht`, and the gap is real money (c/kWh):
ORES 13,27 / 7,39; AIESH 15,17 / 8,21; Tecteo RESA 12,20 / 7,01; Sibelga
9,39 / 7,10; ORES IMPACT 2026 16,578 / 5,090.

⚠️ AND THE BANDS ARE ANTI-CORRELATED WITH WHAT THE BATTERY WANTS TO DO. The
cheap network hours are the cheap spot hours, so flattening them does not shift
the curve - it UNDERSTATES the spread and declines cycles that would have paid.
Same feed, same markup, the only difference being the taxes argument:

    flat 0.0000 / 0.0739 / 0.1198 / 0.1327 / 1.0000
                                       -> cheapest hour 13, spread 0.1500
    ORES dag 0.1327 / nacht 0.0739     -> cheapest hour 03, spread 0.1788

The regression check grades WHICH HOUR IS CHEAPEST, not the spread: an
implementation that reads the table once and adds one number to every point is
the LEVEL bucket wearing a period table - right magnitude, wrong shape - and a
spread assertion passes on it. Measured: hoisting the lookup out of
`assemble()`'s loop (+17 B) is red on six named checks in test_price.py and
GREEN in the other 28 files.

ONE GRAMMAR, NOT TWO. `static_tariff.py` already shipped the periods, the day
selectors, the tiling rule and the DST handling, so `parse_taxes_profile()` is
the same parser with the option name and the "what this number means" clause as
arguments. A second tiling rule would be a second set of 23- and 25-hour-day
bugs. test_static_tariff.py section 10 pins that two ways: by parsing every
module under `app/` and asserting the grammar is defined in exactly one of
them, and by deriving each of thirteen refusal sentences for the new option
from the old option's own sentence rather than transcribing them.

`Component.TAXES` semantics, `code_leaks()` and the double-counting guarantee
are untouched. The new key joins FRAMEWORK_KEYS, BANNED_IN_PLUGIN_CODE is
derived from that set, and a plugin that names it is refused at `register()`.
It reaches both plugins that take taxes - `custom_formula` ({ENERGY, MARKUP})
and `generic_dayahead` ({ENERGY}) - and not `manual_csv`, which is all-in: the
table is routed through `capabilities().adds`, exactly as the scalar is.

⚠️ A MALFORMED TABLE IS REFUSED AT STARTUP, NOT AT THE NEXT FETCH. It is read
on the ~30 s planning path, and a table that first fails at 03:00 is a site
that stops pricing at 03:00, which §11.4 turns into a quiet fallback
indistinguishable from a healthy fixed-tariff day. validate.py refuses three
things: a table that does not tile the day; a table set beside a NON-DEFAULT
`price_taxes_eur_kwh`, because the table wins and the scalar would then be a
number the operator typed that decides nothing; and a whole card typed in
CENTS, which is how these figures are printed. That last rung is not a
restatement of the parser's +-10 EUR/kWh bound - ORES's 13,27 trips the parser,
but Sibelga's entire card, 9,39 and 7,10, is under it and would otherwise have
started as a 9.39 EUR/kWh levy. Both rungs are graded by the REASON each gives,
and mutating them together (TEST-16) moves three rows.

NOTHING CHANGES FOR A SITE THAT DOES NOT SET IT. The option ships "", and the
scalar path is unchanged arithmetically rather than merely in intent:
test_price.py 16f reproduces the pre-TARIFF-17 expression and compares 12
capability/scalar combinations point for point with `==`.

13 mutations, every one red on a named check, ledger in test_price.py below
section 16k with byte deltas and the one equivalent mutant named. 29/29 green.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BwRLw7eKYj2byVdwB6kbjU

goodwe_controller/config.yaml

@@ -328,6 +328,40 @@ options:
   # validate.py warns about exactly that.
   static_profile: ""
 
+  # TARIFF-17. THE TAXES COMPONENT AS A DAY/NIGHT TABLE, for the sites whose
+  # network tariff actually has one. "" means the flat price_taxes_eur_kwh
+  # above decides, which is what every install has had until now and is CORRECT
+  # IN FLANDERS: Fluvius distribution is a single rate, and its row on the
+  # tariff card offers only `Normaal | Uitsl. nacht` - exclusive night being a
+  # separate physical circuit, not the night register of a dual-rate meter.
+  #
+  # The Walloon and Brussels DSOs are on the same card with FOUR columns -
+  # `Enkelvoudig | Dag | Nacht | Uitsl. nacht` - and the gap is real money
+  # (c EUR/kWh): ORES dag 13,27 / nacht 7,39; AIESH 15,17 / 8,21; Tecteo RESA
+  # 12,20 / 7,01; Sibelga 9,39 / 7,10; ORES IMPACT 2026 16,578 / 5,090.
+  #
+  # ⚠️ WHY THIS IS NOT COSMETIC. The optimiser reads the SPREAD (max - min) and
+  # which hour is cheapest. A flat number is additive and identical every hour,
+  # so it cancels out of both - it cannot distort anything, and it also cannot
+  # express this. These bands are ANTI-CORRELATED with what the battery wants
+  # to do (cheap network hours are cheap spot hours), so flattening them
+  # UNDERSTATES the true spread and declines cycles that would have paid. See
+  # DOCS.md, "The three buckets".
+  #
+  # Same JSON grammar as static_profile above - the same tiling rule, the same
+  # day selectors, the same DST handling, because it is literally the same
+  # parser. ⚠️ THE VALUE IS THE TAXES COMPONENT ALONE, NOT AN ALL-IN PRICE:
+  #
+  #   {"periods": [
+  #      {"name":"dag",  "from":"07:00","to":"22:00","days":"mon-fri","eur_per_kwh":0.1327},
+  #      {"name":"nacht","from":"22:00","to":"07:00","days":"mon-fri","eur_per_kwh":0.0739},
+  #      {"name":"nacht","from":"00:00","to":"24:00","days":"sat,sun", "eur_per_kwh":0.0739}]}
+  #
+  # ⚠️ SET THIS *OR* price_taxes_eur_kwh, NOT BOTH. Two writers of one quantity,
+  # one of which silently wins, is refused at startup: leave the scalar at its
+  # shipped default when you fill this in.
+  price_taxes_profile: ""
+
   # TARIFF-15. YOUR OWN TARIFF CARD, as two fixed coefficients. Used only when
   # `price_provider: custom_formula`; "" is unset.
   #
@@ -847,6 +881,10 @@ schema:
   # parse_static_profile() accepts an already-parsed dict too, so a future
   # nested schema is a config.yaml change and no code change at all.
   static_profile: str?
+  # TARIFF-17. A JSON string for `static_profile`'s reason, and parsed by
+  # `static_tariff.parse_taxes_profile()` - the SAME period grammar, so a
+  # second tiling rule and a second set of DST bugs do not exist to diverge.
+  price_taxes_profile: str?
   # TARIFF-15. A JSON string for the same reason `static_profile` is one: it is
   # ONE option key, it survives config.yaml's flat options block, and
   # parse_price_formula() accepts an already-parsed dict too, so a future