Merge release/1.0 (e3e4ba6) into opt15-price-run-fixes

Conflicts (5 files, 9 hunks) resolved keeping both sides:
- p1.py: held_t (OPT-15) beside held_since (SAFETY-90).
- modetrade.py: chargers() takes targets (P4) and probe (OPT-15); decide()
  clears the chargers, a probing refuser included, while a battery drains
  (SAFETY-78); the docstring lists both rules.
- main.py: the roll goes into the SAFETY-90/91 projection chain
  (`_peak_proj`); the SAFETY-95 drain-tail grid_w keeps the run-edge hold on
  its other branch; the P4 forecast state and the hold state both stay.
- DOCS.md, DECISIONS: both lines kept, OPT-15 item refreshed.

Adaptations the merge needs:
- SAFETY-81 x F1: a rolled projection is not graded by the saturation alarm
  until the quarter's first sample, as the old edge tick was not, so a
  standing overload is still notified once per quarter.
- test_safety81, test_modes_p4: modes-on pins re-pinned (with a note), modes
  off pinned to e3e4ba6; test_price_run_fixes: identity pins on e3e4ba6,
  F1 reproduced at one inverter (SAFETY-91 already holds two), tests for the
  drain and the day plan against the probe.

Co-Authored-By: Claude <noreply@anthropic.com>

goodwe_controller/app/allocator.py

@@ -344,6 +344,21 @@ class _Narrowed:
         self.lo, self.hi = lo, hi
 
 
+def pin_w(b):
+    """The watts a unit's own SET places once held inside its hard limits,
+    as `plan()` places a standing pin, or None when the unit has no SET."""
+    pv = getattr(b, "pinned_w", None)
+    if getattr(b, "gate", None) is None or pv is None:
+        return None
+    lo, hi = _int_envelope(b)
+    return float(pv) if lo > hi else float(_clamp_int(round(float(pv)), lo, hi))
+
+
+def hi_w(b):
+    """A unit's upper hard limit as `plan()` narrows it to whole W (SAFETY-84)."""
+    return float(_int_envelope(b)[1])
+
+
 def loop_bound(bounds, live=None):
     """OPT-11. `(lo, hi)`: what the units can place when the LOOP decides.
 
@@ -364,11 +379,8 @@ def loop_bound(bounds, live=None):
             continue
         if getattr(b, "contradiction", False):
             continue
-        pv = getattr(b, "pinned_w", None)
-        if getattr(b, "gate", None) is not None and pv is not None:
-            lo, hi = _int_envelope(b)
-            p = float(pv) if lo > hi else float(_clamp_int(round(float(pv)),
-                                                            lo, hi))
+        p = pin_w(b)
+        if p is not None:
             lo_sum += min(0.0, p)
             hi_sum += max(0.0, p)
             continue

goodwe_controller/app/arbiter.py

@@ -76,6 +76,12 @@ from . import allocator
 P_SAFETY = 100        # stopped, inputs missing, shutting down, device limits
 P_MAINTENANCE = 60    # maintenance owns the actuator outright (drain, hold)
 P_PEAK = 50           # capacity-tariff peak shaving - costs real money
+# The order in effect: safety limits and the SAFETY-73 refusal > the peak
+# guard > maintenance > modes > trade > loop. A peak floor above a drain still
+# binds: the `drain` site floor at N>=2 (SAFETY-78), refiled at P_MAINTENANCE
+# at N=1 (SAFETY-83); over a HOLD, `_peak_over_hold()` (SAFETY-86).
+# A cheap-window charge is suspended while the peak guard holds and, at N>=2,
+# sized to the quarter's headroom (SAFETY-84).
 P_MAINT_SHAPE = 40    # maintenance shaping the loop (charge-only)
 # OPT-04. §10.1 priority 3 - price arbitrage. ⚠️ ITS POSITION IS THE SPEC, NOT A
 # preference: P_PEAK (50) is ABOVE it so clause 2 lets the capacity-tariff floor
@@ -184,6 +190,22 @@ CLAIM_SCOPE = {
     # the banner and the claim an install has had since SAFETY-02 shipped.
     # `Controller.cycle()` does not even arm the site detector there.
     "sign_site": SCOPE_SITE,
+    # main.py: `Claim.limit("drain", P_MAINTENANCE, lo=...)`, SAFETY-78. At
+    # N>=2, while a pack's maintenance drain is pinned, the site target may
+    # not go below what that pin places: below it a sibling would have to
+    # charge against the drain (circulation, refused, 0 W). A site `lo`,
+    # never filed at N=1. DECISIONS/SAFETY-78-drain-at-two.md.
+    "drain": SCOPE_SITE,
+    # main.py: `Claim.limit("charge", P_MAINT_SHAPE, hi=...)`, SAFETY-84. The
+    # mirror of `drain` for a cheap-window maintenance charge at N>=2: the site
+    # target may not go above what the charging pack's own `hi` asks, or a
+    # sibling would have to give against it. Never filed at N=1.
+    # DECISIONS/SAFETY-84-charge-at-two.md.
+    "charge": SCOPE_SITE,
+    # main.py: `Claim.limit("hold", P_MAINTENANCE, hi=...)`, SAFETY-86. While a
+    # holding pack gives the peak shortfall at N>=2, the site target stays at
+    # the peak floor, what the pin and the others place. Never filed at N=1.
+    "hold": SCOPE_SITE,
 
     # --- UNIT: about one pack, one inverter, one device -------------------
     # main.py: `Claim.limit("device", P_SAFETY, self.dev_min, self.dev_max,
@@ -613,7 +635,7 @@ def site_resolve(claims: list) -> Resolution:
 
 
 def resolve(claims: list, *, units=None, weights=None, live=None,
-            tick=None) -> Resolution:
+            tick=None, reserve=()) -> Resolution:
     """The three stages, in order, over one cycle's claims.
 
     `units` is the site's roster of inverters. Left None it is derived from the
@@ -715,6 +737,13 @@ def resolve(claims: list, *, units=None, weights=None, live=None,
     gate, held = _unit_modes(out, site_claims, bounds, live)
     if callable(weights):
         weights = weights(out.target_w)
+    # SAFETY-87/91: units under their peak reserve weigh 0 while the site
+    # gives, so the others carry the target first. An Off battery gives the
+    # peak's shortfall, so it goes before them when no other unit is left.
+    reserve = set(reserve) if out.target_w > 0.0 else set()
+    if held and reserve and not set(bounds) - held - reserve:
+        held = set()
+    held = held | reserve
     if held:
         weights = {u: (0.0 if u in held else
                        (1.0 if weights is None else weights.get(u, 1.0)))

goodwe_controller/app/clamp.py

@@ -260,6 +260,22 @@ def loop_clamp_note(d) -> str:
     return ""
 
 
+def shortfall_note(named) -> str:
+    """SAFETY-85: the alarm text while another owner sets the batteries.
+    `named` is `[(inverter name or None, asked W, given W)]`, one per battery
+    that gave less than asked."""
+    return f"{REASON_CODE}: " + ", ".join(
+        f"{name or 'the battery'} gives {given:+.0f} W of the {asked:+.0f} W "
+        f"asked" for name, asked, given in named)
+
+
+def delivery_short(asked_w, given_w, margin_w) -> bool:
+    """SAFETY-85: did a battery asked to discharge give more than `margin_w`
+    less? A charge is never short: a full pack tapers (SAFETY-42 section 7)."""
+    asked, given = float(asked_w), float(given_w)
+    return asked > 0.0 and asked - given > abs(float(margin_w))
+
+
 def write_clamp_note(named) -> str:
     """The write-side alarm text: `named` is `[(inverter name or None,
     ClampResult)]` for every inverter whose write was cut back this cycle.
@@ -382,6 +398,10 @@ class ClampWatchdog:
         self.over_rating = 0      # bug=True: "Power request too high"
         self.bound = 0            # bug=False: "Battery is not keeping up"
         self.episodes = 0         # rising edges
+        # SAFETY-85: episodes with a bug=False engagement. The status row
+        # counts these; counting cycles read 861 on one rig run.
+        self.bound_episodes = 0
+        self._bound_counted = False
         self.since: datetime | None = None
         self.last_alarm: datetime | None = None
         self.reason = ""
@@ -436,6 +456,10 @@ class ClampWatchdog:
                 self.spoken = False
                 self.bug = False
                 self.bug_spoken = False
+                self._bound_counted = False
+            if not bug and not self._bound_counted:
+                self._bound_counted = True
+                self.bound_episodes += 1
             if bug or not self.bug:
                 self.reason = reason
                 self.facts = tuple(facts)

goodwe_controller/app/control.py

@@ -382,6 +382,9 @@ class Decision:
     # SAFETY-52. The refused direction to carry back in (+1 discharge, -1
     # charge, 0 none), or None when the caller does not carry it.
     refused: int | None = None
+    # SAFETY-85. The `bound` held the integrator or the command this cycle,
+    # so the batteries' limits, not the loop, decided it.
+    held: bool = False
 
 
 def slew_limit_w(tuning: Tuning) -> float:
@@ -481,6 +484,8 @@ def compute(
     refused: int | None = None,
     probe: bool = False,
     bound: tuple | None = None,
+    gave_nothing: bool | None = None,
+    idle_w: float = 0.0,
 ) -> Decision:
     """One control cycle. A cycle is one meter update (~5 s on a HomeWizard P1).
 
@@ -494,6 +499,13 @@ def compute(
     `bound`    OPT-11: `(lo, hi)`, what the batteries may place this tick with
                their modes applied (`allocator.loop_bound()`), or None. See
                MODE_BOUND below. None is the law as it was.
+    `gave_nothing` SAFETY-94: the caller's span check - the reading stayed
+               under REFUSED_BELOW_W, one way, for SETTLE_CYCLES spanning
+               REFUSED_SPAN_S. A refusal engages only with it. None leaves it
+               out (compute() alone, as before).
+    `idle_w`   SAFETY-97: what `actual_w` reads while the batteries give
+               nothing (app/idle.py). The refusal's band and its end are
+               centred on it. 0 is the law as it was.
     """
     reason = "tracking"
     # OPT-11: a bound that leaves out 0 W would FORCE a direction, which no
@@ -614,11 +626,13 @@ def compute(
     # OPT-11: the integrator does not wind past what the modes let the
     # batteries place. Only a side tighter than the rail is left in `bound`
     # (above), so this never takes SAFETY-03's `i_clamped` away from the rail.
+    held_by_bound = False
     if bound is not None:
         held = max(float(bound[0]), min(float(bound[1]), i_w))
         if held != i_w:
             i_w = held
             reason = MODE_BOUND
+            held_by_bound = True
 
     # ⚠️ Applied EVERY cycle, frozen or not: the freeze is conditional, this
     # bound is not. It is what makes the worst-case unwind time finite and
@@ -812,13 +826,18 @@ def compute(
     # `saturation_w` is a refusal, not a slow plant. The drop to 0 skips the slew
     # limit because it only removes an ask the battery is not meeting.
     if refused is not None:
+        # SAFETY-94: and only when the reading has given nothing for the
+        # whole span, not just now. `sat_count` also counts the cycles a
+        # healthy battery spends reversing through its lag (-2000 W towards
+        # +800 W): at a 1 s meter its 12 cycles end as the reading passes 0.
         if (refused == 0 and frozen and sat_count >= SETTLE_CYCLES
                 and abs(prev_w) > tuning.saturation_w
-                and abs(actual_w) < REFUSED_BELOW_W):
+                and abs(actual_w - idle_w) < REFUSED_BELOW_W
+                and gave_nothing is not False):
             refused = 1 if prev_w > 0 else -1
         if refused and refused * i_w < 0:
             refused = 0                          # the loop wants the other way
-        elif refused and refused * actual_w >= PROBE_ANSWER_W:
+        elif refused and refused * (actual_w - idle_w) >= PROBE_ANSWER_W:
             refused = 0                          # it delivers: a probe answered,
             #                                     or a slow reading arriving
         elif refused:
@@ -839,6 +858,7 @@ def compute(
         if inside != target:
             target = inside
             reason = MODE_BOUND
+            held_by_bound = True
         # SAFETY-48's lead cap above may pull the integrator back toward the
         # slewed command; what is CARRIED stays inside the bound too.
         i_w = max(float(bound[0]), min(float(bound[1]), i_w))
@@ -860,7 +880,7 @@ def compute(
 
     return Decision(float(target), sat_count, frozen, reason, float(i_w),
                     i_clamped, clamped, float(i_bound_w), float(want),
-                    float(clamped_w), refused)
+                    float(clamped_w), refused, held_by_bound)
 
 
 def maintenance_charge_floor(

goodwe_controller/app/dayplan.py

@@ -0,0 +1,262 @@
+"""OPT-11 P4: the day plan. Will the sun fill each battery before the
+expensive hours? If not, how much should it take from the grid?
+
+Pure: the forecast (`solarfc`), the house profile, the price runs and the
+batteries in; a level per battery (`Plan.targets`) out. `modetrade.charge_to()`
+turns the level into permission to charge from the grid; main.py rebuilds the
+plan with the price runs (at most every 15 minutes) and keeps a level unless
+it moves by `HYST_KWH` or `HYST_FRAC` (`hold()`).
+
+The sums (OPT-11-design section 1, "Excess solar", with the owner's answers):
+* `sun`: trust x the solar the house will not use, between now and the
+  expensive run the cheap run is for, x the charge efficiency:
+  `trust x sum_h max(0, forecast_h - house_h) x EFF`.
+* Solar first batteries take it first, up to the ceiling. What is left is
+  shared by the Leftover solar batteries by their room.
+* Cheap hours only ignores the plan and fills to the ceiling, as in P3 and
+  the design (section 1). Skipping the sun's share cost money in the replay
+  (PR #156 review: 29.72 against 29.41 EUR on real 2026 prices).
+* A Leftover solar battery charges only up to what the house will draw from
+  it in the expensive runs before the next cheap run, less its share:
+  `min(ceiling, floor + house use / EFF) - share`. So it buys only the
+  shortfall, not up to the ceiling.
+* Solar first never charges from the grid (owner, 2026-09-29).
+
+The house profile is the add-on's own measurement, grid + battery power, per
+local hour, over the last `PROFILE_DAYS` days; the estimate for an hour is the
+median of that hour. It is net of the solar the house used itself, so for
+the solar sum it is never taken below the night-time median (`base()`).
+The site's own solar readings are not used: TEL-11 keeps them out of every
+control decision.
+"""
+
+import statistics
+from dataclasses import dataclass
+from datetime import datetime, timedelta, timezone
+
+from .packmode import LEFTOVER_SOLAR, SOLAR_FIRST
+from .tariff import BILLING_TZ
+
+EFF = 0.95                  # charge (and discharge) efficiency
+HYST_KWH = 1.0              # a kept level moves only by this much...
+HYST_FRAC = 0.10            # ...or this share of the battery's shortfall
+PROFILE_DAYS = 7
+MIN_HOURS = 20              # hours of a day recorded before it counts
+NIGHT_HOURS = (0, 1, 2, 3, 4, 5, 22, 23)
+DEFAULT_TRUST_PCT = 70
+
+# Site verdicts (the page's forecast line).
+SUNNY, PARTLY, DARK = "sunny", "partly", "dark"
+
+
+# --------------------------------------------------------------------------- #
+# The house profile
+# --------------------------------------------------------------------------- #
+def _local(t: datetime):
+    return t.astimezone(BILLING_TZ)
+
+
+class HouseProfile:
+    """Hourly means of the house's net use (grid + battery power), kept per
+    local day and hour: `{"YYYY-MM-DD": {hour: [mean_w, samples]}}`. The
+    store holds `dump()`; `load()` takes it back and drops what is bad."""
+
+    def __init__(self, data=None):
+        self.days = {}
+        self._cur = None            # (day, hour, sum, n)
+        if isinstance(data, dict):
+            self.load(data)
+
+    def load(self, data):
+        for day, hours in data.items():
+            try:
+                datetime.strptime(str(day), "%Y-%m-%d")
+            except ValueError:
+                continue
+            if not isinstance(hours, dict):
+                continue
+            row = {}
+            for h, v in hours.items():
+                try:
+                    hi, w = int(h), float(v)
+                except (TypeError, ValueError):
+                    continue
+                if 0 <= hi < 24 and abs(w) < 1e6:
+                    row[hi] = w
+            if row:
+                self.days[str(day)] = row
+
+    def dump(self) -> dict:
+        return {d: {str(h): round(w, 1) for h, w in sorted(r.items())}
+                for d, r in sorted(self.days.items())}
+
+    def add(self, now: datetime, house_w) -> bool:
+        """One reading. Returns True when an hour closed (then store it)."""
+        lt = _local(now)
+        key = (lt.strftime("%Y-%m-%d"), lt.hour)
+        closed = False
+        if self._cur is not None and self._cur[:2] != key:
+            day, hour, s, n = self._cur
+            if n >= 60:                 # about 5 minutes of readings
+                self.days.setdefault(day, {})[hour] = s / n
+                closed = True
+            self._cur = None
+            self._prune(lt)
+        if house_w is None:
+            return closed
+        if self._cur is None:
+            self._cur = (key[0], key[1], 0.0, 0)
+        d, h, s, n = self._cur
+        self._cur = (d, h, s + float(house_w), n + 1)
+        return closed
+
+    def _prune(self, lt):
+        """Keep the last `PROFILE_DAYS` days; a day after today (the clock
+        was wrong once) would never age out, so it goes too."""
+        keep = (lt.date() - timedelta(days=PROFILE_DAYS)).isoformat()
+        today = lt.date().isoformat()
+        for d in [d for d in self.days if d < keep or d > today]:
+            del self.days[d]
+
+    def ready(self) -> bool:
+        """At least one day with `MIN_HOURS` hours recorded."""
+        return any(len(r) >= MIN_HOURS for r in self.days.values())
+
+    def hour_w(self, hour: int):
+        vals = [r[hour] for r in self.days.values() if hour in r]
+        return statistics.median(vals) if vals else None
+
+    def base(self):
+        vals = [w for h in NIGHT_HOURS if (w := self.hour_w(h)) is not None]
+        return statistics.median(vals) if vals else None
+
+    def estimator(self):
+        """`f(hour) -> W`, or None when not ready. Fixed at call time."""
+        if not self.ready():
+            return None
+        base = self.base() or 0.0
+        table = {}
+        for h in range(24):
+            w = self.hour_w(h)
+            table[h] = base if w is None else w
+        return lambda h: table[h], max(0.0, base)
+
+
+# --------------------------------------------------------------------------- #
+# The plan
+# --------------------------------------------------------------------------- #
+@dataclass(frozen=True)
+class Plan:
+    verdict: str                # SUNNY / PARTLY / DARK
+    sun_kwh: float              # solar the batteries can count on
+    fc_kwh: float               # the forecast over the same span
+    until: datetime             # the expensive run the plan is for
+    targets: dict               # name -> level % (Leftover solar only)
+    need_kwh: dict              # name -> kWh from the grid (0: none)
+    share_kwh: dict             # name -> kWh of solar counted for it
+
+
+def _hour_slices(t0, t1):
+    """Local-hour slices of [t0, t1): (start, end, local hour)."""
+    out, t = [], t0
+    while t < t1:
+        lt = _local(t)
+        nxt = (lt.replace(minute=0, second=0, microsecond=0)
+               + timedelta(hours=1)).astimezone(timezone.utc)
+        e = min(nxt, t1)
+        out.append((t, e, lt.hour))
+        t = e
+    return out
+
+
+def _room(p, to_pct):
+    if p.capacity_kwh is None or p.soc is None:
+        return 0.0
+    return max(0.0, float(to_pct) - float(p.soc)) / 100.0 * float(
+        p.capacity_kwh)
+
+
+def plan(forecast, house, runs, now, packs, *, trust_pct, floor_pct,
+         ceiling_pct):
+    """The day plan, or None when there is none to make: no forecast, no
+    house profile yet, no price plan, or no expensive run after the cheap
+    run. `house` is `HouseProfile.estimator()`'s answer. `packs` are
+    `modetrade.Pack`s."""
+    if forecast is None or house is None or runs is None or not runs.on \
+            or runs.cheap is None:
+        return None
+    house_w, base_w = house
+    until = next((g for g in runs.give if g.start >= runs.cheap.end), None)
+    if until is None:
+        return None
+    trust = max(0.0, min(1.0, float(trust_pct) / 100.0))
+    sun = fc_sum = 0.0
+    for s, e, h in _hour_slices(now, until.start):
+        pv = forecast.between(s, e)
+        if pv is None:
+            return None             # the span reaches a day with no forecast
+        hrs = (e - s).total_seconds() / 3600.0
+        use = max(house_w(h), base_w) * hrs / 1000.0
+        sun += max(0.0, pv - use)
+        fc_sum += pv
+    sun *= trust * EFF
+
+    usable = [p for p in packs if p.use and p.live and p.idle
+              and p.soc is not None and p.capacity_kwh]
+    sf = [p for p in usable if p.mode == SOLAR_FIRST]
+    price = [p for p in usable if p.mode == LEFTOVER_SOLAR]
+    sf_room = sum(_room(p, ceiling_pct) for p in sf)
+    excess = max(0.0, sun - sf_room)
+    rooms = {p.name: _room(p, ceiling_pct) for p in price}
+    total_room = sum(rooms.values())
+
+    # What the house draws in the expensive runs from the one this plan is
+    # for until the next cheap run (or a day), from the profile.
+    horizon = until.start + timedelta(hours=24)
+    use_kwh = 0.0
+    for g in runs.give:
+        if g.start < until.start or g.start >= horizon:
+            continue
+        for s, e, h in _hour_slices(g.start, g.end):
+            use_kwh += max(0.0, house_w(h)) * (
+                e - s).total_seconds() / 3600.0 / 1000.0
+    caps = {p.name: float(p.capacity_kwh) for p in price}
+    cap_sum = sum(caps.values()) or 1.0
+
+    targets, need, share = {}, {}, {}
+    for p in price:
+        sh = excess * rooms[p.name] / total_room if total_room > 0 else 0.0
+        sh_pct = sh / caps[p.name] * 100.0
+        want = use_kwh * caps[p.name] / cap_sum / EFF
+        top = min(float(ceiling_pct),
+                  float(floor_pct) + want / caps[p.name] * 100.0)
+        level = max(0.0, top - sh_pct)
+        targets[p.name] = round(level, 2)
+        need[p.name] = round(_room(p, level), 3)
+        share[p.name] = round(sh, 3)
+    if sun < sf_room:
+        verdict = DARK
+    elif any(v > 0.05 for v in need.values()):
+        verdict = PARTLY
+    else:
+        verdict = SUNNY
+    return Plan(verdict, round(sun, 3), round(fc_sum, 3), until.start,
+                targets, need, share)
+
+
+def hold(old: dict | None, new: dict, capacity: dict) -> dict:
+    """Hysteresis: a battery keeps its old level unless the new one differs
+    by at least `HYST_KWH`, or by `HYST_FRAC` of the larger level's energy
+    (whichever is less). A battery new to the plan takes its level at once;
+    one that left the plan is dropped at once."""
+    out = {}
+    for name, level in new.items():
+        was = (old or {}).get(name)
+        cap = float(capacity.get(name) or 0.0)
+        if was is None or cap <= 0:
+            out[name] = level
+            continue
+        moved = abs(level - was) / 100.0 * cap
+        step = min(HYST_KWH, HYST_FRAC * max(was, level) / 100.0 * cap)
+        out[name] = level if moved >= step else was
+    return out

goodwe_controller/app/freshness.py

@@ -87,6 +87,10 @@ when it has not moved THROUGH A CHANGE IT WAS OBLIGED TO FOLLOW:
                 AND |standing command now - standing command when the reading
                      last changed| >= MOVE_W
 
+SAFETY-94: "unchanged for" counts only the reads at which both command terms
+held, so a register that rested is not judged before it could answer.
+DECISIONS/SAFETY-94-lagging-battery.md.
+
 0x0518 is the inverter reporting ITSELF and it tracks its own command: r = 0.998
 with battery power against r = 0.09 with the real meter (goodwe/NOTES.md §3.3),
 command and actual agreeing within 4 W once settled (§5.10, 2026-08-22), and the
@@ -216,6 +220,8 @@ change - which was the ONLY exit - has a median of 143 s, 17 episodes at or
 over the live one's 710 s, and a worst case of 21440 s. That distribution is a
 property of this battery's firmware. It is not a property of this code, and the
 add-on must not depend on it.
+SAFETY-94: many were the gate judging a rested register on its first read
+(SAFETY-58). Counted from the ask, the same days give 59 trips.
 
 THE RULE, and it is SAFETY-13's shape one module over - "which latches get an
 exit, not how long the block lasts":
@@ -372,7 +378,9 @@ BOUNDS = {
                    "SAFETY-57: the verdict is withdrawn after 17.0 s of the "
                    "standing command below 250 W, because at 0 W the register "
                    "is obliged to nothing and the verdict cannot be tested "
-                   "again from inside the state it creates"),
+                   "again from inside the state it creates. SAFETY-94: the "
+                   "35 s counts only reads at which the command asks the "
+                   "register to move"),
     "soc": Bound(
         signal="soc (0x050E, pack SoC, U16, 1 %, 10 s publish)",
         unchanged_s=float("inf"),
@@ -416,11 +424,9 @@ class Freshness:
     new grading window at that instant. The 1 Hz oscillation the latch exists to
     prevent is still prevented: the new window is `bound.unchanged_s` wide, so
     no re-trip can land sooner than 35 s after a release, rather than on the
-    next read. ⚠️ MEASURED FROM THE RELEASE, NOT FROM THE COMMAND RESUMING - if
-    the site rests for longer than the window before it asks for anything, the
-    window is already old and the re-trip lands on the first read at which the
-    command travels 250 W again. That is survivor 5's shape, it predates this
-    card, and its cost is one `stale_input_s` hold.
+    next read. SAFETY-94: the 35 s counts only while the command asks the
+    register to move, so a site that rests after a release is not re-tripped
+    on its first ask.
 
     ⚠️ TWO CLOCKS, AND THE DISTINCTION IS THE WHOLE OF SAFETY-57'S HONESTY.
     `changed_mono` / `held` are facts about the REGISTER: when it last carried a
@@ -451,6 +457,11 @@ class Freshness:
         # the change-stamps; `_release()` is where they diverge.
         self.graded_from = None
         self.standing_at_grade = None
+        # SAFETY-94. Seconds of this window during which the register was
+        # obliged to move (the command at least `move_w` and `move_w` away
+        # from `standing_at_grade`), and the instant of the last read.
+        self.obliged_acc = 0.0
+        self.last_read = None
         # The instant the standing command last FELL below `move_w`, or None
         # while an obligation is standing. The release timer runs off this.
         self.rested_since = None
@@ -499,6 +510,7 @@ class Freshness:
         # it reads in the order the state machine moves - withdraw, then
         # re-grade - not because the code depends on it.
         self._release(standing_w, now_mono)
+        self._oblige(standing_w, now_mono)
         self._grade(standing_w, now_mono)
 
     def _open_window(self, standing_w, now_mono) -> None:
@@ -510,6 +522,35 @@ class Freshness:
         self.graded_from = float(now_mono)
         self.standing_at_grade = (None if standing_w is None
                                   else float(standing_w))
+        # The read that opens a window is never an ask (no travel yet).
+        self.obliged_acc = 0.0
+
+    def _obliged(self, standing_w) -> bool:
+        """Is the register asked to move: the command is at least `move_w` and
+        has travelled `move_w` since the window opened?"""
+        if standing_w is None or self.standing_at_grade is None:
+            return False
+        standing_w = float(standing_w)
+        return (abs(standing_w) >= self.bound.move_w
+                and abs(standing_w - self.standing_at_grade)
+                >= self.bound.move_w)
+
+    def _oblige(self, standing_w, now_mono) -> None:
+        """SAFETY-94. Count only the time the register was asked to move.
+
+        A register that held still while nothing asked it to move has not
+        failed, so time before the command moved is not evidence. The time
+        since the previous read counts when the obligation stands at this
+        read; a command flapping in and out of the obligation still adds up.
+        """
+        now_mono = float(now_mono)
+        if self.last_read is not None and self._obliged(standing_w):
+            self.obliged_acc += max(0.0, now_mono - self.last_read)
+        self.last_read = now_mono
+
+    def obliged_s(self) -> float:
+        """Seconds of the current window the register was obliged to move."""
+        return self.obliged_acc
 
     def _release(self, standing_w, now_mono) -> None:
         """SAFETY-57. Withdraw a verdict whose obligation is no longer standing.
@@ -543,7 +584,12 @@ class Freshness:
         if self.stale or self.graded_from is None:
             return
         held_s = self.graded_s(now_mono)
-        if held_s < self.bound.unchanged_s:
+        # SAFETY-94 (closes SAFETY-58): the bound counts only the time the
+        # command asked the register to move, not the time since it last
+        # changed. A register that rested for minutes was otherwise judged on
+        # the first read after a new command, before it could answer (live,
+        # 2026-10-03: 1 s after the command).
+        if self.obliged_s() < self.bound.unchanged_s:
             return
         # ⚠️ BOTH None GUARDS ARE FOR A CALLER THAT DOES NOT KNOW ITS OWN
         # OBLIGATION YET, WHICH IS NOT `_read_unit`. `Inverter.standing_w()`

goodwe_controller/app/hass.py

@@ -11,6 +11,8 @@ import time
 
 import aiohttp
 
+from . import messages
+
 _LOG = logging.getLogger("goodwe.hass")
 
 CORE_API = "http://supervisor/core/api"
@@ -19,6 +21,7 @@ BAD_STATES = ("unknown", "unavailable", "none", "")
 # What the Supervisor's proxy answers while Home Assistant restarts.
 UNAVAILABLE = (502, 503, 504)
 STATES_TIMEOUT_S = 10       # UX-13's entity list, like every other read here
+STILL_WAITING_S = 300       # SAFETY-112: one reminder line per 5 minutes down
 
 
 class Outage:
@@ -29,15 +32,30 @@ class Outage:
     ("502, message='Bad Gateway', url=URL(...)", "Received message 8:1000 is
     not str"). Now the first channel to fail says it once at WARNING, the raw
     text goes to DEBUG, and the last channel to recover says so at INFO.
+
+    SAFETY-112: the Supervisor answers 502 for every read, write and
+    websocket until Home Assistant has finished starting, however live its
+    entities already are (DECISIONS/SAFETY-112-waiting-for-home-assistant.md).
+    So an outage also says, every STILL_WAITING_S, that it is still on, and
+    `waiting()` puts it on the status page.
     """
 
     def __init__(self):
         self.down_on = set()
+        self.since = None           # monotonic start of this outage
+        self._told = None           # when the last "still waiting" line went
 
     def down(self, channel: str, what: str, detail) -> None:
+        now = time.monotonic()
         if not self.down_on:
             _LOG.warning("Home Assistant is not answering (%s), perhaps it is "
-                         "restarting. The add-on keeps trying.", what)
+                         "still starting. Control waits and resumes by itself.",
+                         what)
+            self.since = self._told = now
+        elif now - self._told >= STILL_WAITING_S:
+            self._told = now
+            _LOG.info("Still waiting for Home Assistant to finish starting, "
+                      "%s so far.", messages.duration(now - self.since))
         self.down_on.add(channel)
         _LOG.debug("Home Assistant not answering on %s: %s", channel, detail)
 
@@ -45,7 +63,13 @@ class Outage:
         if channel in self.down_on:
             self.down_on.discard(channel)
             if not self.down_on:
-                _LOG.info("Home Assistant answers again.")
+                _LOG.info("Home Assistant answers again after %s.",
+                          messages.duration(time.monotonic() - self.since))
+
+    def waiting(self) -> bool:
+        """True while Home Assistant's API does not answer. The API, not the
+        meter websocket: every battery reading and every write rides on it."""
+        return "api" in self.down_on
 
 
 OUTAGE = Outage()

goodwe_controller/app/homeview.py

@@ -20,7 +20,7 @@ from datetime import datetime, timedelta, timezone
 
 from . import arbitrage, messages, peakguard, uitext
 from .maintenance import CHARGE as M_CHARGE, DRAIN as M_DRAIN, HOLD as M_HOLD
-from .maintenance import IDLE as M_IDLE
+from .maintenance import IDLE as M_IDLE, next_slot_start
 from .packmode import CHEAP_HOURS, GRID_CHARGE_MODES, LEFTOVER_SOLAR, SOLAR_FIRST
 from .price import Absence, Uncertainty, brussels
 from .static_tariff import static_plan
@@ -345,7 +345,10 @@ def mode_runs(c, day0, day1, now, shadow):
                                    else (soc - floor)) / 100.0 * cap)
             return kwh
         blocks = []
-        if rp.charge_useful() and pm.mode in GRID_CHARGE_MODES:
+        # P4: with a day plan, the grid block is the planned shortfall.
+        need = plan_need(c, inv.name)
+        if rp.charge_useful() and (need > 0.0 if need is not None
+                                   else pm.mode in GRID_CHARGE_MODES):
             blocks.append(("grid", rp.cheap))
         sell = rp.sell if pm.sell and pm.can_sell else None
         for g in rp.give:
@@ -358,6 +361,8 @@ def mode_runs(c, day0, day1, now, shadow):
                 continue
             hrs = (run.end - run.start).total_seconds() / 3600.0
             kwh = room(kind, hrs)
+            if kind == "grid" and need is not None:
+                kwh = min(kwh, need)
             if kwh < MIN_KWH:
                 continue
             price = run.mean_eur_kwh
@@ -382,10 +387,60 @@ def mode_runs(c, day0, day1, now, shadow):
     return out, None
 
 
+def plan_need(c, name):
+    """P4: kWh this battery buys from the grid by the day plan, or None when
+    there is no plan for it (then P3 option A applies)."""
+    targets = c.plan_targets() if hasattr(c, "plan_targets") else None
+    if not targets or name not in targets:
+        return None
+    inv = next((i for i in c.inverters if i.name == name), None)
+    if inv is None or inv.soc is None or not inv.capacity_kwh:
+        return None
+    return max(0.0, targets[name] - float(inv.soc)) / 100.0 * float(
+        inv.capacity_kwh)
+
+
+def plan_state(c):
+    """P4: `"plan"` (a day plan is made), `"learning"` (no house profile
+    yet), `"no_forecast"` (set but missing or stale), or None (not set, or
+    battery modes off)."""
+    if not getattr(c, "modes_on", False) or \
+            getattr(c, "fc_entity", None) is None:
+        return None
+    if getattr(c, "solar_fc", None) is None:
+        return "no_forecast"
+    hp = getattr(c, "house_profile", None)
+    if hp is not None and not hp.ready():
+        return "learning"
+    return "plan" if getattr(c, "day_plan", None) is not None else None
+
+
+def solar_block(c, now):
+    """P4: the solar forecast line for the Batteries screen and the Simple
+    settings view: `{state, fc_kwh, count_kwh, updated, line}`."""
+    st = plan_state(c)
+    out = {"state": st, "fc_kwh": None, "count_kwh": None, "updated": None,
+           "line": ""}
+    if st is None and getattr(c, "solar_fc", None) is None:
+        return out
+    fc = getattr(c, "solar_fc", None)
+    if fc is not None:
+        trust = float(getattr(c, "solar_trust_pct", 70)) / 100.0
+        out.update(fc_kwh=round(fc.today.kwh, 1),
+                   count_kwh=round(fc.today.kwh * trust, 1),
+                   updated=hhmm(fc.at))
+    if st in ("no_forecast", "learning"):
+        out["line"] = _t("solar." + st)
+    elif fc is not None:
+        out["line"] = line_solar(fc.today.kwh, out["count_kwh"],
+                                 out["updated"])
+    return out
+
+
 def maintenance_runs(c, day0, day1, now, shadow):
     """The monthly battery cycle: under way now, or starting later today.
-    The cycle starts in the hour `maintenance_start_hour` names, read as the
-    control cycle reads it (UTC hour of `now`), shown in local time."""
+    The cycle starts in the hour `maintenance_start_hour` names, read in the
+    site's zone exactly as the control cycle reads it (MAINT-10)."""
     runs, lines = [], []
     waiting = []
     for i, (inv, m) in enumerate(zip(c.inverters, c.maints)):
@@ -404,10 +459,9 @@ def maintenance_runs(c, day0, day1, now, shadow):
         if not m.due(now) and (m.next_due(now) is None
                                or m.next_due(now) >= day1):
             continue
-        start = now.replace(hour=cfg.start_hour, minute=0, second=0,
-                            microsecond=0)
-        if start + timedelta(hours=1) <= now:
-            start += timedelta(days=1)
+        start = next_slot_start(now, cfg.start_hour, m.tz)
+        if start is None:
+            continue
         due_at = m.next_due(now)
         if due_at is not None and due_at > start:
             continue
@@ -640,6 +694,14 @@ def battery_rows(c, shadow, running, held=False):
         # carries its share (SAFETY-73)?
         other = next((o.name for o in c.inverters if o is not inv
                       and refusing(c, o) > 0 and not _off(c, o)), None)
+        # SAFETY-78: another battery drains for its monthly cycle, so this
+        # one never charges now. Not while that drain waits: it files no
+        # floor then, so this battery may charge from solar.
+        waits = getattr(c, "_drain_waits", ())
+        cycling = next((o.name for j, o in enumerate(c.inverters)
+                        if o is not inv and j < len(c.maints)
+                        and c.maints[j].phase == M_DRAIN
+                        and o.name not in waits), None)
         role = None if tick is None else tick.roles.get(inv.name)
         # Only once a cycle has run with modes on (`tick`): before that
         # nothing is known, so nothing is claimed about the prices.
@@ -655,7 +717,10 @@ def battery_rows(c, shadow, running, held=False):
             phase=phase, shadow=shadow, running=running, held=held,
             refused=refusing(c, inv), peak=peak,
             giving=flow(inv.batt) == "giving", other_refuses=other,
-            sf_ahead=sf_ahead, role=role, plan=plan, has_at=bool(at))
+            sf_ahead=sf_ahead, role=role, plan=plan, has_at=bool(at),
+            other_cycle=cycling,
+            day=None if pm is None or pm.mode not in PRICE_MODES
+            else day_key(c, inv.name))
         rows.append({
             "name": inv.name,
             "level_pct": None if inv.soc is None else float(inv.soc),
@@ -673,7 +738,8 @@ def battery_rows(c, shadow, running, held=False):
             # UX-13 P3: why it does what "now" says, from what the add-on
             # knows this cycle. Price and forecast reasons are OPT-11 P3/P4.
             "why_key": why,
-            "why": why_words(why, name=other, at=at),
+            "why": why_words(why, name=cycling if why == "other_cycle"
+                             else other, at=at),
         })
         if modes_on:
             # OPT-11 P1: the battery's switch and mode, for the Batteries
@@ -689,10 +755,25 @@ def battery_rows(c, shadow, running, held=False):
     return rows
 
 
+def day_key(c, name):
+    """P4: the day plan's word for one Leftover solar or Cheap hours
+    battery: `sun_fills`, `tops_up`, `no_forecast`, or None."""
+    st = plan_state(c)
+    if st == "no_forecast":
+        mode = c.pack_mode(next(i for i in c.inverters if i.name == name))
+        return "no_forecast" if mode.mode == LEFTOVER_SOLAR else None
+    if st != "plan":
+        return None
+    need = plan_need(c, name)
+    if need is None:
+        return None
+    return "tops_up" if need >= MIN_KWH else "sun_fills"
+
+
 def battery_why(*, modes_on, mode, off, reading, phase, shadow, running,
                 held, refused, peak, sf_ahead, giving=False,
                 other_refuses=None, role=None, plan=None,
-                has_at=False) -> str:
+                has_at=False, other_cycle=None, day=None) -> str:
     """The key of one battery's "why" line (`home_words.why`), most urgent
     first. Pure, so every branch is tested without a controller."""
     if not reading:
@@ -712,11 +793,15 @@ def battery_why(*, modes_on, mode, off, reading, phase, shadow, running,
         return "refuses_give" if refused > 0 else "refuses_charge"
     if peak:
         return "peak"
+    if other_cycle:
+        return "other_cycle"
     if giving and other_refuses:
         return "other_refuses"
     if not modes_on:
         return "modes_off"
     # OPT-11 P3: the battery's role in the price runs this cycle.
+    if role == "hold" and day is not None:
+        return day              # P4: what the day plan decided
     if role in ROLE_WHY:
         if role == "hold" and not has_at:
             return "saves_later"
@@ -818,17 +903,20 @@ def month_peak(c, now):
     if pg is not None:
         out["period_w"] = pg.projected_w
         ceiling = pg.ceiling_w or limit_w
-    out["line"] = line_period(out["period_w"], ceiling, c.shadow)
+    out["line"] = line_period(out["period_w"], ceiling, c.shadow,
+                              unmeasured=getattr(c, "peak_unmeasured_s", 0.0)
+                              > 0.0)
     return out
 
 
-def state_of(c, level, shadow):
+def state_of(c, level, shadow, waiting=False):
     """One word for the pill and the banner's colour: running, shadow,
-    stopped, alarm or warning."""
+    stopped, alarm, waiting or warning. `waiting`: the red headline is
+    Home Assistant still starting (SAFETY-112), which needs nobody."""
     if shadow:
         return "shadow"
     if level == "bad":
-        return "alarm"
+        return "waiting" if waiting else "alarm"
     if not c.auto:
         return "stopped"
     if level == "warn":
@@ -837,24 +925,27 @@ def state_of(c, level, shadow):
 
 
 def build(c, *, level: str, checks: list, now: datetime | None = None,
-          lang: str = "en") -> dict:
+          lang: str = "en", held: bool | None = None,
+          waiting: bool = False) -> dict:
     """The structured half of `/status`, in `lang` (UX-13 P5). Pure reads of
     the controller."""
     _LANG[0] = uitext.lang_of(lang)
     try:
-        return _build(c, level=level, checks=checks, now=now)
+        return _build(c, level=level, checks=checks, now=now, held=held,
+                      waiting=waiting)
     finally:
         _LANG[0] = "en"
 
 
-def _build(c, *, level, checks, now):
+def _build(c, *, level, checks, now, held=None, waiting=False):
     now = now or datetime.now(timezone.utc)
     shadow = bool(c.shadow)
-    kind = state_of(c, level, shadow)
+    kind = state_of(c, level, shadow, waiting)
     # A red banner means every inverter is at 0 W (the status cascade), so
     # nothing is planned until it clears. Shadow mode still plans: it is
-    # what the add-on would do.
-    held = level == "bad" and not shadow
+    # what the add-on would do. `held` False: an alarm while control runs
+    # (SAFETY-87, the peak alarms).
+    held = level == "bad" and not shadow and held is not False
     running = (bool(c.auto) or shadow) and not held
     settled = all(at_zero(inv) for inv in c.inverters)
     ctl = next((r for r in checks if r.get("id") == "controller"), None)
@@ -864,6 +955,7 @@ def _build(c, *, level, checks, now):
                  modes_on=bool(getattr(c, "modes_on", False)),
                  running=running, held=held, shadow=shadow)
     return {
+        "solar": solar_block(c, now),
         "state": {"kind": kind, "pill": pill(kind),
                   "ran": ctl.get("text", "") if ctl else "",
                   "sub": banner_sub(kind)},
@@ -1160,6 +1252,10 @@ def run_house_amount() -> str:
     return _t("run.house_amount")
 
 
+def line_solar(fc_kwh, count_kwh, at) -> str:
+    return _t("solar.line", kwh=_kwh(fc_kwh), count=_kwh(count_kwh), at=at)
+
+
 def line_no_trade(key) -> str:
     return "" if key == "off" else _t("no_trade." + key)
 
@@ -1202,8 +1298,11 @@ def line_peak_not_covered() -> str:
     return _t("peak_not_covered")
 
 
-def line_period(period_w, limit_w, shadow) -> str:
+def line_period(period_w, limit_w, shadow, unmeasured=False) -> str:
     step = _w(shadow, "step_in", kw=_kw(limit_w))
+    if unmeasured:
+        # SAFETY-90: the add-on started during this period.
+        return _t("period_unmeasured") + " " + step
     if period_w is None:
         return step
     return _t("period", kw=_kw(period_w)) + " " + step
@@ -1236,7 +1335,7 @@ def _samples() -> list:
     out += [("title", mode_word(k)) for k in words["modes"]]
     out += [("title", mode_house()), ("title", attn_shadow()),
             ("line", attn_shadow_body())]
-    for k in ("running", "shadow", "stopped", "alarm", "warning"):
+    for k in ("running", "shadow", "stopped", "alarm", "waiting", "warning"):
         out += [("title", pill(k)), ("line", banner_sub(k))]
     for sh in (False, True):
         out += [("title", tile_solar(v, s)) for v, s in
@@ -1277,6 +1376,7 @@ def _samples() -> list:
                 ("plan", line_peak_limit(3500, sh)),
                 ("plan", line_period(1240, 3500, sh)),
                 ("plan", line_period(None, 3500, sh)),
+                ("plan", line_period(1240, 3500, sh, unmeasured=True)),
                 ("plan", control_text(True, sh)),
                 ("plan", control_text(False, sh))]
     out += [("plan", run_grid_why(0.1412)), ("plan", run_grid_amount(1.23)),
@@ -1302,6 +1402,8 @@ def _samples() -> list:
                                                 off=off, peak=peak)))
     out += [("plan", why_words(k, name="Battery A")) for k in words["why"]]
     out += [("plan", today_words(k)) for k in words["today"]]
+    out += [("plan", line_solar(9.2, 6.4, "10:15")),
+            ("plan", _t("solar.no_forecast")), ("plan", _t("solar.learning"))]
     out += [("plan", line_no_trade(k)) for k in
             ("not_covered", "no_prices", "peak", "not_firm", "not_worth",
              "no_level")]

goodwe_controller/app/idle.py

@@ -0,0 +1,87 @@
+"""SAFETY-97: what a battery's power reading shows while it gives nothing.
+
+B's reading (0x0518) shows -95 to -118 W at idle (standby draw, live
+2026-10-03); A's shows -2 to -4 W. "The battery gives nothing" is graded
+against this idle reading, not against 0 W, or a refusing B never latches.
+DECISIONS/SAFETY-97-idle-offset.md.
+
+Learned per unit, never configured:
+- only while control runs, the unit is not refused, stale or tripped, and
+  its command has been within IDLE_ASK_W for IDLE_QUIET_S (a refusing battery
+  is asked more than that, so it cannot teach its refusal as idle);
+- a reading beyond IDLE_SAMPLE_W is not a sample;
+- first value: the mean of IDLE_FIRST_S of samples; then a slow follow
+  (IDLE_TAU_S);
+- persisted per unit and restored, clamped to IDLE_SAMPLE_W, at start.
+The band is centred on it clamped to IDLE_MAX_W (owner, 2026-10-04). Until
+learned the idle reading is 0 W, the rule as it was.
+"""
+
+import math
+
+IDLE_MAX_W = 75.0       # |idle| used: under the 100 W band, so it keeps 0 W +-25 W
+IDLE_SAMPLE_W = 250.0   # a reading beyond this is not a sample
+IDLE_ASK_W = 50.0       # a command this small counts as "asked ~0"
+IDLE_QUIET_S = 120.0    # 6 lags of 20 s: a 2500 W step has decayed to 6 W
+IDLE_FIRST_S = 120.0    # seconds of samples averaged for the first value
+IDLE_TAU_S = 1800.0     # then follow drift this slowly
+IDLE_SAVE_W = 5.0       # persist when the value moved this far
+IDLE_GAP_S = 10.0       # a longer gap between reads counts as this
+
+
+def _num(v):
+    try:
+        v = float(v)
+    except (TypeError, ValueError):
+        return None
+    return v if math.isfinite(v) else None
+
+
+class IdleReading:
+    """One unit's idle reading. `w` is what "gives nothing" is centred on."""
+
+    def __init__(self, saved=None):
+        v = _num(saved)
+        self.value = (None if v is None
+                      else max(-IDLE_SAMPLE_W, min(IDLE_SAMPLE_W, v)))
+        self.saved = self.value
+        self.quiet_since = None
+        self.last = None
+        self.acc_w = 0.0
+        self.acc_s = 0.0
+
+    @property
+    def w(self) -> float:
+        """The centre used: the learned value clamped to IDLE_MAX_W."""
+        if self.value is None:
+            return 0.0
+        return max(-IDLE_MAX_W, min(IDLE_MAX_W, self.value))
+
+    def observe(self, reading, standing_w, now_mono, may_learn) -> bool:
+        """One read. Returns True when the value should be persisted."""
+        now = float(now_mono)
+        dt = (0.0 if self.last is None
+              else max(0.0, min(IDLE_GAP_S, now - self.last)))
+        self.last = now
+        standing = _num(standing_w)
+        if not may_learn or standing is None or abs(standing) > IDLE_ASK_W:
+            self.quiet_since = None
+            return False
+        if self.quiet_since is None:
+            self.quiet_since = now
+        b = _num(reading)
+        if (now - self.quiet_since < IDLE_QUIET_S or b is None
+                or abs(b) > IDLE_SAMPLE_W or dt <= 0.0):
+            return False
+        if self.value is None:
+            self.acc_w += b * dt
+            self.acc_s += dt
+            if self.acc_s < IDLE_FIRST_S:
+                return False
+            self.value = self.acc_w / self.acc_s
+        else:
+            self.value += (b - self.value) * min(1.0, dt / IDLE_TAU_S)
+        if self.saved is None or abs(self.value - self.saved) >= IDLE_SAVE_W:
+            self.saved = self.value
+            return True
+        return False

goodwe_controller/app/inverter.py

@@ -127,6 +127,7 @@ from . import messages
 # SAFETY-37. The freshness policy, and the ONE place its bounds are written.
 # freshness.py imports nothing from this package, so the direction is one-way.
 from .freshness import BOUNDS, Freshness
+from .idle import IdleReading
 # CFG-03's ONE in-code mirror of config.yaml's SAFETY-24 defaults. Imported
 # rather than retyped: the flat-keys path below needs `bms_soc_floor`'s
 # shipped default and a literal here would be the fourth defaults site that
@@ -321,13 +322,21 @@ class Inverter:
         # take, 0 none), when that refusal or its last probe started, the
         # current probe's start, and the cycles of evidence so far and when
         # they began. Memory only, like SAFETY-52's: stop and start end it.
-        # Used at N>1 only.
+        # The evidence count is also used at N=1 (SAFETY-94); the rest at N>1.
         self.refused = 0
         self.refused_at = None
         self.probe_from = None
         self.ref_count = 0
         self.ref_since = None
         self.ref_sign = 0
+        self.ref_from = None
+        # SAFETY-97: what this unit's reading shows at idle; "gives nothing"
+        # is centred on it. Learned, persisted, restored (app/idle.py).
+        self.idle = IdleReading(data.get(self.key("idle_w")))
+
+    @property
+    def idle_w(self) -> float:
+        return self.idle.w
 
     # -- store ---------------------------------------------------------------
     def key(self, name: str) -> str:

goodwe_controller/app/maintenance.py

@@ -34,7 +34,7 @@ simply not do.
 import logging
 import math
 from dataclasses import dataclass, field
-from datetime import datetime, timedelta, timezone
+from datetime import datetime, timedelta, timezone, tzinfo
 
 from .store import MAINT_UNIT_KEYS, unit_key
 
@@ -65,10 +65,30 @@ POWER_MOVING = (DRAIN, CHARGE, HOLD)
 # 12 h means the battery is not following commands - a fault, not a slow day. The charge phase deliberately waits for sun and for cheap hours, so
 # it is expected to span a night; 36 h still bounds it.
 DRAIN_TIMEOUT_MIN = 720
+# MAINT-13: minutes the pack was ALLOWED to charge (the price gate open), not
+# wall-clock minutes since the charge began. See CHARGE_WALL_TIMEOUT_MIN.
 CHARGE_TIMEOUT_MIN = 2160
 # After an abort, do not immediately re-trigger in the same start hour.
 RESTART_COOLDOWN_MIN = 90
 
+# MAINT-13 (DECISIONS/MAINT-13-full-pack-is-complete.md). Constants, not options.
+# A pack that reaches target - 3 and then takes no more charge for this many
+# minutes of allowed charging counts as full.
+CHARGE_NEAR_FULL_PCT = 3
+CHARGE_STALL_MIN = 60
+# Wall-clock backstop for a charge whose gate never opens (no cheap hours, no sun).
+CHARGE_WALL_TIMEOUT_MIN = 10080
+# A failed cycle (stuck drain or charge) is not retried before this many days.
+FAIL_BACKOFF_DAYS = 7
+# One tick counts at most this many minutes: a gap means the add-on was down.
+CHARGE_TICK_MAX_MIN = 5
+# The charge accounting is written to the state file at most this often.
+CHARGE_SAVE_MIN = 5
+# MAINT-14 (DECISIONS/MAINT-14-no-soc-in-maintenance.md): with no SoC reading
+# the timeouts still run, a drain holds at 0 W, and the log says once, after this
+# many minutes, that the level has been unknown for long.
+NOSOC_NOTE_MIN = 15
+
 # ⚠️ CFG-03. THE ONE IN-CODE MIRROR OF config.yaml FOR EVERY `maintenance_*`
 # OPTION, and the only place in the add-on where one of these numbers is typed.
 #
@@ -112,7 +132,9 @@ RESTART_COOLDOWN_MIN = 90
 MAINT_OPTION_DEFAULTS = {
     "maintenance_enabled": False,
     "maintenance_interval_days": 28,
-    "maintenance_start_hour": 10,
+    # MAINT-10: a LOCAL hour (site_zone() below), 19:00 so the drain runs
+    # into the night rather than through the solar day.
+    "maintenance_start_hour": 19,
     # ⚠️ 2000, NOT THE 2500 THIS SHIPPED AS, and config.yaml carries the
     # argument: both rates must stay at or below `max_w` (2000) or the
     # cheap-window charge shaping asks the arbiter for `hi = -charge_w` against
@@ -177,6 +199,69 @@ class MaintConfig:
         )
 
 
+# --------------------------------------------------------------------------- #
+# MAINT-10: the start hour is local time. See DECISIONS/MAINT-10-local-start-hour.md.
+# --------------------------------------------------------------------------- #
+def _load_zone(name):
+    """A tzinfo for an IANA name, or `(None, why)`."""
+    if not name or not isinstance(name, str):
+        return None, "none given"
+    try:
+        from zoneinfo import ZoneInfo
+        return ZoneInfo(name.strip()), ""
+    except Exception as err:                      # noqa: BLE001 - any failure
+        return None, f"{name!r} is not a known zone ({type(err).__name__})"
+
+
+def site_zone(ha_zone, ha_why: str, env_tz) -> tuple:
+    """`(tzinfo, name, source, why)`: Home Assistant's zone (source "ha"), else
+    the container's TZ ("tz"), else UTC ("utc"). `why` says what was missing."""
+    tz, why = _load_zone(ha_zone)
+    if tz is not None:
+        return tz, ha_zone, "ha", ""
+    ha_why = ha_why or why
+    tz, env_why = _load_zone(env_tz)
+    if tz is not None:
+        return tz, env_tz, "tz", ha_why
+    return timezone.utc, "UTC", "utc", f"Home Assistant: {ha_why}, TZ: {env_why}"
+
+
+def in_start_slot(now: datetime, start_hour: int, tz: tzinfo) -> bool:
+    """Is `now` inside today's one-hour start slot, read on the local clock?
+
+    Normally the slot is the local hour `start_hour`. On the day the clocks go
+    forward and that hour does not exist, it is the first hour after the jump.
+    On the day they go back and it happens twice, only the first one counts.
+    Worked from UTC instants only (`astimezone`), so it does not depend on how
+    a tzinfo resolves a wall time that is missing or doubled.
+    """
+    if now.tzinfo is None:
+        now = now.replace(tzinfo=timezone.utc)
+    here = now.astimezone(tz).replace(tzinfo=None)
+    before = (now - timedelta(hours=1)).astimezone(tz).replace(tzinfo=None)
+    if here.hour == start_hour:
+        # the second pass through a repeated hour: an hour ago read the same
+        return not (before.date() == here.date() and before.hour == start_hour)
+    slot = here.replace(hour=start_hour, minute=0, second=0, microsecond=0)
+    # the clock jumped over the start of the slot within the last hour
+    return before < slot and here >= slot + timedelta(hours=1)
+
+
+def next_slot_start(now: datetime, start_hour: int, tz: tzinfo):
+    """The start of the slot `now` is in, or else of the next one; None if
+    there is none within 50 h (no real zone does that)."""
+    step = timedelta(minutes=15)
+    t = now.replace(minute=now.minute - now.minute % 15, second=0,
+                    microsecond=0) - timedelta(hours=1)
+    for _ in range(4 * 50):
+        if (in_start_slot(t, start_hour, tz)
+                and not in_start_slot(t - step, start_hour, tz)
+                and t + timedelta(hours=1) > now):
+            return t
+        t += step
+    return None
+
+
 @dataclass
 class MaintResult:
     phase: str
@@ -192,6 +277,9 @@ class MaintResult:
     # showing an idle machine and a due date in the past. Empty on every path
     # that is not deferring, so a roster of one never sees it.
     deferred: str = ""
+    # MAINT-13: "drain" or "charge" on the one tick where a cycle FAILED, so
+    # the Controller can tell the operator once. Empty on every other tick.
+    failed: str = ""
 
 
 class UnitHistory:
@@ -256,8 +344,12 @@ class Maintenance:
     """
 
     def __init__(self, cfg: MaintConfig, store, unit: str | None = None,
-                 name: str = "", mirror_flat: bool = False):
+                 name: str = "", mirror_flat: bool = False,
+                 tz: tzinfo | None = None):
         self.cfg = cfg
+        # MAINT-10: the zone `cfg.start_hour` is read in - main.py resolves it
+        # once at startup (`site_zone()`). UTC when nobody says, as before.
+        self.tz = tz or timezone.utc
         # ⚠️ `self.store` IS THE VIEW, NOT THE Store. Everything in this class
         # names an UNQUALIFIED key - "phase", "last_completed" - and the view is
         # the one place that turns it into the key this pack owns. A raw
@@ -275,6 +367,14 @@ class Maintenance:
         # per cycle would flush the very context that explains it. Same pattern
         # as `Controller._arb_action` and `_maint_shape_suspended`.
         self._deferred = ""
+        # MAINT-13: the charge accounting (see _charge_account), in memory and
+        # written to the state file every CHARGE_SAVE_MIN minutes.
+        self._trk = None
+        self._trk_saved = None
+        # MAINT-14: when the SoC reading went missing (None while it is there),
+        # and whether the "unknown for long" line was said in this episode.
+        self._nosoc_since = None
+        self._nosoc_said = False
 
     # -- state ---------------------------------------------------------------
     @property
@@ -282,6 +382,11 @@ class Maintenance:
         return self.store.get("phase", IDLE)
 
     def _enter(self, phase: str, now: datetime, events: list, msg: str) -> None:
+        self._nosoc_since = None
+        self._trk = None
+        self._trk_saved = None
+        if self.store.get("charge_track") is not None:
+            self.store.set("charge_track", None)
         self.store.set("phase", phase)
         self.store.set_time("phase_started", now)
         _LOG.info("%s", msg)
@@ -322,6 +427,21 @@ class Maintenance:
         return (last_try is None
                 or (now - last_try) >= timedelta(minutes=RESTART_COOLDOWN_MIN))
 
+    def backoff_until(self, now: datetime):
+        """MAINT-13: when a failed cycle may be tried again, or None.
+
+        None when nothing failed, when the back-off is over, or when a cycle
+        completed after the failure (a forced start that worked ends it).
+        """
+        failed = self.store.get_time("last_failed")
+        if failed is None:
+            return None
+        done = self.store.get_time("last_completed")
+        if done is not None and done >= failed:
+            return None
+        until = failed + timedelta(days=FAIL_BACKOFF_DAYS)
+        return until if now < until else None
+
     def wants_start(self, now: datetime) -> bool:
         """Would this pack begin a cycle on this tick if the site let it?
 
@@ -331,8 +451,10 @@ class Maintenance:
         about who was asking - so the IDLE branch of `tick()` calls this one.
         """
         return (self.phase == IDLE and self.cfg.enabled
-                and now.hour == self.cfg.start_hour and self.due(now)
-                and self._cooled(now))
+                and in_start_slot(now, self.cfg.start_hour, self.tz)
+                and self.due(now)
+                and self._cooled(now)
+                and self.backoff_until(now) is None)
 
     # -- operations ----------------------------------------------------------
     def force_start(self, now: datetime, blocked_by: str = "") -> list:
@@ -360,6 +482,140 @@ class Maintenance:
         self._enter(DRAIN, now, events, "maintenance: forced start -> drain")
         return events
 
+    def _charge_account(self, now: datetime, soc: float | None,
+                        gate_open: bool) -> dict:
+        """MAINT-13: what this charge has used so far, as minutes of ALLOWED time.
+
+        `open_min` counts only ticks with the price gate open; `flat_min` counts
+        gate-open minutes since the SoC last beat its best; a closed gate pauses
+        both. One tick adds at most CHARGE_TICK_MAX_MIN, so a gap (add-on down)
+        counts for nothing. A state file from before MAINT-13, or from another
+        charge, starts from the wall-clock minutes so far: the old behaviour.
+
+        MAINT-14: `soc` may be None (no reading). Time still counts, the stall
+        wait pauses, and `last` keeps the last SoC seen (saved with the rest).
+        """
+        since = self.store.get("phase_started")
+        trk = self._trk
+        if trk is None:
+            raw = self.store.get("charge_track")
+            if isinstance(raw, dict) and raw.get("since") == since:
+                trk = dict(raw)
+            else:
+                trk = {"since": since, "open_min": self._elapsed_min(now),
+                       "flat_min": 0.0,
+                       "best": None if soc is None else float(soc),
+                       "last": None if soc is None else float(soc), "at": None}
+            self._trk = trk
+        at = trk.get("at")
+        try:
+            last = datetime.fromisoformat(at) if at else None
+        except (TypeError, ValueError):
+            last = None
+        dt = 0.0 if last is None else min(
+            CHARGE_TICK_MAX_MIN, max(0.0, (now - last).total_seconds() / 60.0))
+        trk["at"] = now.isoformat()
+        if soc is None:
+            pass
+        elif trk.get("best") is None or soc > trk["best"]:
+            trk["best"], trk["flat_min"] = float(soc), 0.0
+        elif gate_open:
+            trk["flat_min"] += dt
+        if soc is not None:
+            trk["last"] = float(soc)
+        if gate_open:
+            trk["open_min"] += dt
+        saved = self._trk_saved
+        if saved is None or (now - saved).total_seconds() >= CHARGE_SAVE_MIN * 60:
+            self.store.set("charge_track", dict(trk))
+            self._trk_saved = now
+        return trk
+
+    def _fail(self, now: datetime, kind: str, why: str) -> MaintResult:
+        """MAINT-13: stand down, remember the failure, and tell the Controller."""
+        events = self.abort(now, why)
+        self.store.set_time("last_failed", now)
+        msg = (f"maintenance: the cycle did not finish. It waits "
+               f"{FAIL_BACKOFF_DAYS} days before it tries again.")
+        _LOG.warning("%s", msg)
+        events.append(msg)
+        return MaintResult(IDLE, True, 0.0, False, events, failed=kind)
+
+    def _hold(self, now: datetime, events: list) -> MaintResult:
+        """HOLD for one tick, with or without a SoC reading (MAINT-15).
+
+        HOLD needs no level to end: it is reached only after the charge counted
+        as done (MAINT-13/14), so its end is a time check and nothing else.
+        """
+        elapsed = self._elapsed_min(now)
+        if elapsed >= self.cfg.hold_min:
+            self.store.set_time("last_completed", now)
+            self._enter(IDLE, now, events,
+                        f"maintenance: cycle COMPLETE ({elapsed:.0f} min hold) "
+                        "- handing back to the loop")
+            return MaintResult(IDLE, False, None, False, events)
+        # 0 W, not "do nothing": commanding zero is what stops the loop
+        # pulling the pack straight back down the moment it is full, which
+        # is exactly when the BMS needs it parked at the top.
+        return MaintResult(HOLD, True, 0.0, False, events)
+
+    def _no_soc(self, now: datetime, phase: str, gate_open: bool,
+                events: list) -> MaintResult:
+        """MAINT-14: one tick of a pack in a moving phase with no SoC reading.
+
+        HOLD stays at 0 W and ends at its normal time (MAINT-15). DRAIN holds at 0 W, like HOLD, and its 12 h
+        timeout still runs. CHARGE keeps its timeout and wall backstop: out of
+        time is a failure, except when the last SoC seen was within
+        CHARGE_NEAR_FULL_PCT of the target, which counts as done (MAINT-13).
+        Nothing here may start a phase change that needs the level.
+        """
+        if self._nosoc_since is None:
+            self._nosoc_since = now
+            self._nosoc_said = False
+            self._trk_saved = None          # save the last SoC seen, now
+            if phase == DRAIN:
+                msg = ("maintenance: the battery level is unknown, so the "
+                       "drain holds at 0 W until it is back.")
+                _LOG.warning("%s", msg)
+                events.append(msg)
+        if (not self._nosoc_said and (now - self._nosoc_since).total_seconds()
+                >= NOSOC_NOTE_MIN * 60):
+            self._nosoc_said = True
+            tail = ("The hold still ends at its normal time."
+                    if phase == HOLD else
+                    f"The time limit of the {phase} still applies.")
+            msg = (f"maintenance: no battery level for {NOSOC_NOTE_MIN} min. "
+                   f"{tail}")
+            _LOG.warning("%s", msg)
+            events.append(msg)
+        if phase == HOLD:
+            return self._hold(now, events)
+        elapsed = self._elapsed_min(now)
+        if phase == DRAIN:
+            if elapsed > DRAIN_TIMEOUT_MIN:
+                return self._fail(now, "drain",
+                                  f"drain stuck, battery level unknown, after "
+                                  f"{elapsed / 60:.0f} h")
+            return MaintResult(DRAIN, True, 0.0, False, events)
+        trk = self._charge_account(now, None, gate_open)
+        if (trk["open_min"] > CHARGE_TIMEOUT_MIN
+                or elapsed > CHARGE_WALL_TIMEOUT_MIN):
+            last = trk.get("last")
+            if last is not None and last >= self.cfg.soc_target - CHARGE_NEAR_FULL_PCT:
+                self._enter(HOLD, now, events,
+                            f"maintenance: charge time is up and the last level "
+                            f"seen was {last:.0f} %, close enough to full, so the "
+                            f"charge counts as done -> holding "
+                            f"{self.cfg.hold_min} min to balance")
+                return MaintResult(HOLD, True, 0.0, False, events)
+            if elapsed > CHARGE_WALL_TIMEOUT_MIN:
+                lim = f"the {CHARGE_WALL_TIMEOUT_MIN // 1440}-day limit"
+            else:
+                lim = f"{trk['open_min'] / 60:.0f} h of charging time"
+            return self._fail(now, "charge",
+                              f"charge stuck, battery level unknown, after {lim}")
+        return MaintResult(CHARGE, False, None, True, events)
+
     def abort(self, now: datetime, why: str) -> list:
         events = []
         self._enter(IDLE, now, events, f"maintenance: ABORT ({why})")
@@ -387,13 +643,16 @@ class Maintenance:
 
     # -- the machine ---------------------------------------------------------
     def tick(self, now: datetime, soc: float | None,
-             blocked_by: str = "") -> MaintResult:
+             blocked_by: str = "", gate_open: bool = True) -> MaintResult:
         """One cycle of this pack's state machine.
 
         `blocked_by` is `arbitrate()`'s answer for THIS pack: empty when the
         site's one maintenance slot is available to it, otherwise the reason it
         is not. It gates two things and nothing else - a start, and a phase that
         is already moving power on a pack that does not hold the slot.
+
+        `gate_open` (MAINT-13) is whether the pack may charge now (the price
+        gate); only those minutes count towards the charge timeout.
         """
         events: list = []
         phase = self.phase
@@ -444,13 +703,13 @@ class Maintenance:
         # transitions below mean anything, and a stale "100 %" would end the
         # charge phase having charged nothing. Hold the current phase's command
         # and wait; the phase timeout is the backstop.
+        #
+        # MAINT-14: "hold and wait" is not "wait for ever". The timeouts run
+        # here too, and a drain holds at 0 W (an unknown level never allows
+        # discharge, TEL-08). See `_no_soc`.
         if soc is None:
-            _LOG.warning("maintenance: no SoC reading, holding phase %s", phase)
-            if phase == DRAIN:
-                return MaintResult(DRAIN, True, self.cfg.discharge_w, False, events)
-            if phase == HOLD:
-                return MaintResult(HOLD, True, 0.0, False, events)
-            return MaintResult(CHARGE, False, None, True, events)
+            return self._no_soc(now, phase, gate_open, events)
+        self._nosoc_since = None
 
         elapsed = self._elapsed_min(now)
 
@@ -461,8 +720,8 @@ class Maintenance:
                             f"after {elapsed:.0f} min -> charge")
                 return MaintResult(CHARGE, False, None, True, events)
             if elapsed > DRAIN_TIMEOUT_MIN:
-                events += self.abort(now, f"drain stuck at {soc:.0f} % after {elapsed:.0f} min")
-                return MaintResult(IDLE, True, 0.0, False, events)
+                return self._fail(now, "drain", f"drain stuck at {soc:.0f} % "
+                                                f"after {elapsed:.0f} min")
             return MaintResult(DRAIN, True, self.cfg.discharge_w, False, events)
 
         if phase == CHARGE:
@@ -471,22 +730,31 @@ class Maintenance:
                             f"maintenance: charge complete at {soc:.0f} % after "
                             f"{elapsed:.0f} min -> holding {self.cfg.hold_min} min to balance")
                 return MaintResult(HOLD, True, 0.0, False, events)
-            if elapsed > CHARGE_TIMEOUT_MIN:
-                events += self.abort(now, f"charge stuck at {soc:.0f} % after {elapsed:.0f} min")
-                return MaintResult(IDLE, True, 0.0, False, events)
+            trk = self._charge_account(now, soc, gate_open)
+            near = soc >= self.cfg.soc_target - CHARGE_NEAR_FULL_PCT
+            # MAINT-13 rule 1: close to full and no longer taking charge.
+            if near and trk["flat_min"] >= CHARGE_STALL_MIN:
+                self._enter(HOLD, now, events,
+                            f"maintenance: the battery takes no more charge at "
+                            f"{soc:.0f} %, so the charge counts as done -> holding "
+                            f"{self.cfg.hold_min} min to balance")
+                return MaintResult(HOLD, True, 0.0, False, events)
+            if (trk["open_min"] > CHARGE_TIMEOUT_MIN
+                    or elapsed > CHARGE_WALL_TIMEOUT_MIN):
+                # MAINT-13 rule 2: out of time close to full is complete.
+                if near:
+                    self._enter(HOLD, now, events,
+                                f"maintenance: charge time is up at {soc:.0f} %, "
+                                f"close enough to full, so the charge counts as "
+                                f"done -> holding {self.cfg.hold_min} min to balance")
+                    return MaintResult(HOLD, True, 0.0, False, events)
+                return self._fail(now, "charge",
+                                  f"charge stuck at {soc:.0f} % after "
+                                  f"{trk['open_min']:.0f} min of charging time")
             return MaintResult(CHARGE, False, None, True, events)
 
         if phase == HOLD:
-            if elapsed >= self.cfg.hold_min:
-                self.store.set_time("last_completed", now)
-                self._enter(IDLE, now, events,
-                            f"maintenance: cycle COMPLETE ({elapsed:.0f} min hold) "
-                            "- handing back to the loop")
-                return MaintResult(IDLE, False, None, False, events)
-            # 0 W, not "do nothing": commanding zero is what stops the loop
-            # pulling the pack straight back down the moment it is full, which
-            # is exactly when the BMS needs it parked at the top.
-            return MaintResult(HOLD, True, 0.0, False, events)
+            return self._hold(now, events)
 
         _LOG.error("maintenance: unknown phase %r, forcing idle", phase)
         events += self.abort(now, f"unknown phase {phase!r}")

goodwe_controller/app/messages.py

@@ -102,6 +102,7 @@ class Notice:
     title: str
     body: str
     section: str = ""   # the DOCS.md heading, when it is not the title itself
+    body_nl: str = ""   # MAINT-13: the same words in Dutch, shown under the English
 
     @property
     def docs(self) -> str:
@@ -110,7 +111,9 @@ class Notice:
     def data(self) -> dict:
         """The `persistent_notification.create` payload."""
         return {"notification_id": self.id, "title": self.title,
-                "message": f"{self.body}\n\n{details(self.docs)}"}
+                "message": f"{self.body}\n\n"
+                           + (f"{self.body_nl}\n\n" if self.body_nl else "")
+                           + details(self.docs)}
 
 
 # --- the catalogue ----------------------------------------------------------
@@ -124,6 +127,8 @@ T_CIRCULATING = "Inverters working against each other"
 T_NOT_DELIVERING = "{unit} is not delivering"
 S_NOT_DELIVERING = "An inverter is not delivering"
 T_METER_FROZEN = "Meter reading may be stuck"
+T_MAINT_FAILED = "Battery cycle did not finish"
+T_MAINT_FAILED_NL = "Batterijcyclus niet afgerond"
 
 ID_LOOP_BOUND = "goodwe_integrator_bound"
 ID_OUTPUT_CLAMP = "goodwe_output_clamp"
@@ -132,6 +137,7 @@ ID_PEAK_RESERVE = "goodwe_peak_soc_floor"
 ID_CIRCULATING = "goodwe_circulating_power"
 ID_NOT_DELIVERING = "goodwe_not_delivering_{slug}"
 ID_METER_FROZEN = "goodwe_meter_frozen"
+ID_MAINT_FAILED = "goodwe_maint_failed_{slug}"
 
 # Which limit cut a command (clamp.ClampResult.bound, plus the loop's own).
 # The setting is named by its label, "Inverter rating (W)".
@@ -217,7 +223,7 @@ def peak_saturated(ceiling_w, *, shadow: bool = False) -> Notice:
 
 
 def peak_reserve(ceiling_w, *, soc_unread: bool, floor_unknown: bool,
-                 packs=()) -> Notice:
+                 packs=(), others: bool = False) -> Notice:
     """SAFETY-24/25/32: the peak guard may not draw the battery any lower.
 
     The last sentence is SAFETY-25 and must stay: the reserve binds the peak
@@ -227,7 +233,8 @@ def peak_reserve(ceiling_w, *, soc_unread: bool, floor_unknown: bool,
     roster means some inverter's cut-out level is missing (the peak reserve
     itself always has a value) - so the action names the cut-out level.
     Both are named by their setting labels, "Peak reserve (%)" and "Battery
-    cut-out level (%)".
+    cut-out level (%)". `others`: the other batteries give all they can and
+    it is not enough (SAFETY-87), so the limit MAY be passed.
     """
     if soc_unread:
         why = "The battery level cannot be read"
@@ -241,6 +248,12 @@ def peak_reserve(ceiling_w, *, soc_unread: bool, floor_unknown: bool,
         why = (f"The battery of {names(packs)} is at its peak reserve" if packs
                else "The battery is at its peak reserve")
         act = "Switch off large loads, or lower the peak reserve."
+    if others:
+        return Notice(ID_PEAK_RESERVE, ALARM, T_PEAK_RESERVE,
+                      f"{why}, and the other batteries cannot keep this "
+                      f"15-minute period under your {watts(ceiling_w)} peak "
+                      f"limit alone. {act} Home use can still draw a battery "
+                      f"below its reserve, down to its cut-out level.")
     return Notice(ID_PEAK_RESERVE, ALARM, T_PEAK_RESERVE,
                   f"{why}, so this 15-minute period will go over your "
                   f"{watts(ceiling_w)} peak limit and raise this month's peak. "
@@ -288,6 +301,24 @@ def meter_frozen(unchanged_s) -> Notice:
                   f"stop control on the add-on page.")
 
 
+def maint_failed(kind: str, days: int, unit: str = "", slug: str = "") -> Notice:
+    """MAINT-13: a monthly cycle stopped before it was done. Said once."""
+    full = kind == "charge"
+    who = unit or "The battery"
+    who_nl = unit or "De batterij"
+    en = f"{who} did not {'fill up' if full else 'empty'}, so its cycle " \
+         f"stopped and tries again in {days} days."
+    nl = f"{who_nl} raakte niet {'vol' if full else 'leeg'}, dus de cyclus is " \
+         f"gestopt en probeert het over {days} dagen opnieuw."
+    return Notice(ID_MAINT_FAILED.format(slug=slug or "battery"), WARNING,
+                  T_MAINT_FAILED, en, body_nl=f"{T_MAINT_FAILED_NL}. {nl}")
+
+
+def row_maint_waits(until_text: str) -> str:
+    """MAINT-13: the status row while a failed cycle waits."""
+    return f"Waits until {until_text} after a cycle that did not finish."
+
+
 # --- the status page (UX-08 phase 2b) ----------------------------------------
 # The rows of the Commissioning list and the banner at the top of the add-on
 # page. `main.py` decides WHEN a row shows and its colour (ok / warn / bad);
@@ -405,6 +436,17 @@ def banner_shadow(latched: bool) -> str:
     return "Shadow mode: the battery is not controlled. Inverters stay at 0 W."
 
 
+def banner_ha_waiting() -> str:
+    """SAFETY-112: the Supervisor passes nothing on until Home Assistant has
+    finished starting, so the add-on can neither read nor write."""
+    return "Waiting for Home Assistant to finish starting"
+
+
+def row_ha_waiting() -> str:
+    return ("Home Assistant is not answering, perhaps it is still starting. "
+            "Control resumes by itself when it answers.")
+
+
 # Rows: control and the meter. "Control" is what the add-on does, as in
 # "start control" (STYLE.md section 4).
 def row_controller_starting() -> str:
@@ -470,8 +512,9 @@ def row_peak_saturated(ceiling_w) -> str:
 
 
 def row_peak_reserve(ceiling_w, *, soc_unread: bool, floor_unknown: bool,
-                     packs=()) -> str:
-    """SAFETY-24/25/32. The second sentence is SAFETY-25 and must stay."""
+                     packs=(), others: bool = False) -> str:
+    """SAFETY-24/25/32. The last sentence is SAFETY-25 and must stay.
+    `others`: as in `peak_reserve()` (SAFETY-87)."""
     if soc_unread:
         why = "Battery level cannot be read"
     elif floor_unknown:
@@ -479,6 +522,10 @@ def row_peak_reserve(ceiling_w, *, soc_unread: bool, floor_unknown: bool,
     else:
         why = (f"{names(packs)} battery at its peak reserve" if packs
                else "Battery at its peak reserve")
+    if others:
+        return (f"{why}. The others cannot hold the {watts(ceiling_w)} peak "
+                f"limit alone. Home use still draws it lower, to the cut-out "
+                f"level.")
     return (f"{why}, so the {watts(ceiling_w)} peak limit will be passed. Home "
             f"use still draws the battery below it, down to the cut-out level.")
 
@@ -718,6 +765,15 @@ def row_pv_partial(missing, count) -> str:
             f"reading")
 
 
+def row_forecast_gap(day, missing, count) -> str:
+    """OPT-17. `day` is "today" or "tomorrow"; `missing` are the 1-based
+    positions of the forecast entities with no usable reading."""
+    which = names([str(n) for n in missing])
+    many = len(missing) > 1
+    return (f"Solar forecast for {day}: not used, source{'s' if many else ''} "
+            f"{which} of {count} {'have' if many else 'has'} no reading")
+
+
 def row_pv_single_ignored() -> str:
     return f"Solar production: clear {PV_ONE}, the per-inverter list replaces it"
 
@@ -781,6 +837,12 @@ def row_peak_guard_blind(why: str) -> str:
             f"meanwhile")
 
 
+def row_peak_guard_unmeasured() -> str:
+    """SAFETY-90. Before the first reading; that part counts as high use."""
+    return ("Peak guard: part of this 15-minute period was not measured, "
+            "counted as high use")
+
+
 def row_peak_guard_on(floor_w, limit_w, *, shadow: bool = False) -> str:
     if shadow:
         return (f"Peak guard: would ask for {watts(floor_w)} to stay under "
@@ -835,6 +897,8 @@ WHY_LIMIT = {
     "pack": "the battery level",
     "reserve": "the battery reserve",
     "maintenance": "battery maintenance",
+    "charge": "battery maintenance",
+    "hold": "battery maintenance",
     "refused": "a battery that refuses power",
 }
 
@@ -898,6 +962,7 @@ HINTS = {
     "peak_on": "Peak guard started",
     "peak_off": "Peak guard idle",
     "peak_blind": "Peak guard cannot read the meter well",
+    "peak_gap": "Meter is back, the peak guard counts the missed time as high use",
     "peak_saturated": T_PEAK_SATURATED,
     "peak_reserve": T_PEAK_RESERVE,
     "meter_frozen": T_METER_FROZEN,
@@ -906,6 +971,9 @@ HINTS = {
     "trade_charge": "Trading: charging while the price is low",
     "trade_give": "Trading: giving power while the price is high",
     "trade_off": "Trading: waiting for a better price",
+    "forecast_read": "Solar forecast read, the day plan uses it",
+    "forecast_none": "No solar forecast, so Leftover solar takes solar only",
+    "forecast_no_tomorrow": "Tomorrow's solar forecast is not used, a source has no reading",
     "split": "The power split between inverters changed",
     "clash": "Two limits clash, inverters set to 0 W",
     "no_setpoint": "An inverter has no “Setpoint entity”, inverters stay at 0 W",
@@ -924,11 +992,13 @@ HINTS = {
     "not_delivering_cleared": "{unit}: not-delivering alarm cleared",
     "maintenance": "Battery maintenance: {phase}",
     "maint_paused": "Maintenance charging paused to stay under the peak limit",
+    "maint_failed": "The battery cycle did not finish, so it waits before trying again",
     "pack_on": "{unit}: battery switched on",
     "pack_off": "{unit}: battery switched off, it is asked for 0 W",
     "pack_mode": "{unit}: battery mode changed",
     "pack_sell": "{unit}: selling switched",
     "maint_off": "{unit}: maintenance stopped, the battery is switched off",
+    "maint_waits": "{unit} cannot give power now, so its monthly cycle waits",
     "mode_fault": "{unit}: battery mode ignored because of a software fault",
 }
 
@@ -996,6 +1066,10 @@ def status_samples() -> list:
         ("banner_setup_only", None, banner_setup_only()),
         ("row_setup_only", AMBER, row_setup_only()),
         ("banner_shadow", None, banner_shadow(True)),
+        ("banner_not_ready", None, banner_not_ready(
+            {"text": row_ha_waiting(), "banner": banner_ha_waiting()})),
+        ("banner_ha_waiting", None, banner_ha_waiting()),
+        ("row_ha_waiting", RED, row_ha_waiting()),
         ("row_controller_starting", GREEN, row_controller_starting()),
         ("row_controller_ran", GREEN, row_controller_ran(2)),
         ("row_controller_stalled", RED, row_controller_stalled(45, 30)),
@@ -1009,6 +1083,9 @@ def status_samples() -> list:
         ("row_peak_guard_off", AMBER, row_peak_guard_off()),
         ("row_peak_reserve", RED, row_peak_reserve(
             5000, soc_unread=False, floor_unknown=False, packs=["inverter-b"])),
+        ("row_peak_reserve", RED, row_peak_reserve(
+            5000, soc_unread=False, floor_unknown=False, packs=["inverter-b"],
+            others=True)),
         ("row_peak_reserve", RED, row_peak_reserve(
             5000, soc_unread=True, floor_unknown=False)),
         ("row_peak_reserve", RED, row_peak_reserve(
@@ -1062,6 +1139,8 @@ def status_samples() -> list:
                                            "entity - it cannot be read in watts")),
         ("row_pv_partial", AMBER, row_pv_partial([2, 3], 3)),
         ("row_pv_partial", AMBER, row_pv_partial([2], 2)),
+        ("row_forecast_gap", AMBER, row_forecast_gap("today", [2], 3)),
+        ("row_forecast_gap", AMBER, row_forecast_gap("tomorrow", [1, 2], 2)),
         ("row_pv_single_ignored", AMBER, row_pv_single_ignored()),
         ("row_pv_negative", AMBER, row_pv_negative(2, 3, -1500, False)),
         ("row_pv_negative", AMBER, row_pv_negative(1, 1, -1500, True)),
@@ -1077,6 +1156,7 @@ def status_samples() -> list:
         ("row_peak_guard_idle", GREEN, row_peak_guard_idle(1300, 2500, True)),
         ("row_peak_guard_idle", GREEN, row_peak_guard_idle(1300, 2500, False)),
         ("row_peak_guard_quiet", GREEN, row_peak_guard_quiet()),
+        ("row_peak_guard_unmeasured", AMBER, row_peak_guard_unmeasured()),
         *(("row_peak_guard_blind", AMBER, row_peak_guard_blind(k))
           for k in BLIND_WORDS),
         ("row_peak_guard_on", AMBER, row_peak_guard_on(1200, 2500)),
@@ -1090,6 +1170,7 @@ def status_samples() -> list:
         ("row_battery_refuses", AMBER, row_battery_refuses("inverter-b", 1,
                                                            True)),
         ("row_circulating_check", GREEN, row_circulating_check(0, 0, 60)),
+        ("row_maint_waits", AMBER, row_maint_waits("2026-10-13")),
     ]
 
 
@@ -1111,6 +1192,8 @@ def samples() -> list:
         peak_reserve(5000, soc_unread=False, floor_unknown=False),
         peak_reserve(5000, soc_unread=False, floor_unknown=False,
                      packs=["inverter-b"]),
+        peak_reserve(5000, soc_unread=False, floor_unknown=False,
+                     packs=["inverter-b"], others=True),
         peak_reserve(5000, soc_unread=True, floor_unknown=False),
         peak_reserve(5000, soc_unread=False, floor_unknown=True),
         circulating(["inverter-a"], ["inverter-b"]),
@@ -1118,6 +1201,8 @@ def samples() -> list:
         not_delivering("inverter-b", "inverter_b"),
         meter_frozen(600),
         meter_frozen(90),
+        maint_failed("charge", 7),
+        maint_failed("drain", 7, "inverter-b", "inverter_b"),
     ]
 
 
@@ -1172,6 +1257,11 @@ LABELS = {
     "batt_entity": "Battery power entity",
     "pv_entity": "Solar production entity",
     "pv_entities": "Solar production entities, per inverter",
+    "pv_forecast_entity": "Solar forecast, today",
+    "pv_forecast_tomorrow_entity": "Solar forecast, tomorrow",
+    "pv_forecast_entities": "Several solar forecasts, today",
+    "pv_forecast_tomorrow_entities": "Several solar forecasts, tomorrow",
+    "solar_trust_pct": "Trust in the forecast",
     "p1_phase_import_entities": "Import entities per phase",
     "p1_phase_export_entities": "Export entities per phase",
 }

goodwe_controller/app/modetrade.py

@@ -23,7 +23,11 @@ Roles (the page's Why line names them):
 
 Rules that keep this safe (tests: test_modes_p3.py, test_price_run_fixes.py):
   * every range holds 0 W (a mode may forbid a direction, never force one);
-  * a Solar first battery never charges from the grid (no forecast yet, P4);
+  * a Solar first battery never charges from the grid;
+  * P4: with a day plan (`targets`), a Leftover solar battery charges from
+    the grid only up to its planned level, never above the ceiling; with
+    none it takes solar only (P3 option A). Cheap hours only fills to the
+    ceiling either way (`charge_to()`);
   * grid charging needs a measured peak guard that is clear and a measured
     headroom (SAFETY-45); the trade is sized to that headroom, whose aim is
     `peak_cap_w - peak_margin_w` (SAFETY-79). It starts only at START_W or
@@ -42,13 +46,15 @@ Rules that keep this safe (tests: test_modes_p3.py, test_price_run_fixes.py):
     run in that direction: the refusal wins over the run. The one exception
     is its SAFETY-73 probe inside a cheap run (OPT-15): it is a charger then,
     pinned at PROBE_W by its own claim, so the others rest (one sign) and the
-    card's "tries again every 15 minutes" holds in the run too.
+    card's "tries again every 15 minutes" holds in the run too;
+  * no grid charge while another battery drains for its monthly cycle
+    (`draining`, SAFETY-78): it would charge against the drain.
 """
 
 from dataclasses import dataclass
 
 from .packmode import (CHEAP_HOURS, GRID_CHARGE_MODES, LEFTOVER_SOLAR,
-                       SOLAR_FIRST)
+                       PLAN_CHARGE_MODES, SOLAR_FIRST)
 
 OFF, HOUSE, HOLD, GIVE, SELL, CHARGE, REST = (
     "off", "house", "hold", "give", "sell", "charge", "rest")
@@ -92,16 +98,38 @@ def _room_kwh(p: Pack, pct: float) -> float:
     return max(0.0, abs(pct - p.soc)) / 100.0 * float(p.capacity_kwh)
 
 
-def chargers(packs, ceiling_pct, done=(), probe=False) -> list:
-    """Batteries that may charge from the grid in a cheap run: the modes in
-    `packmode.GRID_CHARGE_MODES` (Cheap hours only until P4's forecast).
-    With `probe`, also one refusing to charge while its SAFETY-73 probe is
-    open: its own P_SAFETY pin keeps it at PROBE_W (OPT-15)."""
-    return [p for p in packs
-            if p.use and p.idle and p.live and p.mode in GRID_CHARGE_MODES
-            and p.soc is not None and p.soc < ceiling_pct
-            and (p.refused >= 0 or (probe and p.probing))
-            and p.name not in done]
+def charge_to(p: Pack, ceiling_pct, targets=None):
+    """The level this battery may charge to from the grid, or None.
+
+    `targets` is the day plan (`dayplan.plan()`: name -> level), or None
+    when there is none (no forecast, stale, or not configured). With no plan
+    this is P3 option A exactly: Cheap hours to the ceiling, the others never.
+    With a plan, a Leftover solar battery charges only to its planned level
+    (the sun fills the rest); a battery the plan leaves out, Cheap hours only
+    included, gets the no-plan answer. Solar first never charges."""
+    if p.mode in GRID_CHARGE_MODES:
+        return float(ceiling_pct)
+    if targets is None or p.name not in targets \
+            or p.mode not in PLAN_CHARGE_MODES:
+        return None
+    t = targets[p.name]
+    return None if t is None else min(float(ceiling_pct), float(t))
+
+
+def chargers(packs, ceiling_pct, done=(), targets=None, probe=False) -> list:
+    """Batteries that may charge from the grid in a cheap run: below the
+    level `charge_to()` allows them (P4: the day plan's). With `probe`, also
+    one refusing to charge while its SAFETY-73 probe is open: its own P_SAFETY
+    pin keeps it at PROBE_W (OPT-15)."""
+    out = []
+    for p in packs:
+        to = charge_to(p, ceiling_pct, targets)
+        if (to is not None and p.use and p.idle and p.live
+                and p.soc is not None and p.soc < to
+                and (p.refused >= 0 or (probe and p.probing))
+                and p.name not in done):
+            out.append(p)
+    return out
 
 
 def sellers(packs, floor_pct, done=()) -> list:
@@ -113,11 +141,15 @@ def sellers(packs, floor_pct, done=()) -> list:
             and p.refused <= 0 and p.name not in done]
 
 
-def energy(packs, floor_pct, ceiling_pct, done_charge=(), done_sell=()):
-    """`(charge_kwh, charge_kw, sell_kwh, sell_kw)` for `priceruns.plan()`."""
-    ch = chargers(packs, ceiling_pct, done_charge)
+def energy(packs, floor_pct, ceiling_pct, done_charge=(), done_sell=(),
+           targets=None):
+    """`(charge_kwh, charge_kw, sell_kwh, sell_kw)` for `priceruns.plan()`.
+    With a day plan the charge is each battery's shortfall, so the cheap run
+    is only as long as the shortfall needs."""
+    ch = chargers(packs, ceiling_pct, done_charge, targets)
     se = sellers(packs, floor_pct, done_sell)
-    return (sum(_room_kwh(p, ceiling_pct) for p in ch),
+    return (sum(_room_kwh(p, charge_to(p, ceiling_pct, targets))
+                for p in ch),
             sum(abs(p.rating_w) for p in ch) / 1000.0,
             sum(_room_kwh(p, floor_pct) for p in se),
             sum(abs(p.rating_w) for p in se) / 1000.0)
@@ -125,7 +157,8 @@ def energy(packs, floor_pct, ceiling_pct, done_charge=(), done_sell=()):
 
 def decide(runs, now, packs, *, charge_ok, sell_ok, trade_why, price_now,
            headroom_w, floor_pct, ceiling_pct, house_w, charging_now=False,
-           blocked=False, done_charge=(), done_sell=()) -> Tick:
+           blocked=False, done_charge=(), done_sell=(),
+           targets=None, draining=False) -> Tick:
     """This tick's ranges, roles and site ask.
 
     `runs` is the kept `priceruns.RunPlan` or None (no fresh prices).
@@ -136,7 +169,9 @@ def decide(runs, now, packs, *, charge_ok, sell_ok, trade_why, price_now,
     `house_w` is the measured house (grid + batteries), or None.
     `charging_now` says last tick charged (then any headroom above 0 keeps
     it going); `blocked` that the guard or the headroom stopped a charge in
-    this 15-minute period.
+    this 15-minute period. `targets` is the day plan (`charge_to()`).
+    `draining` says a battery drains for its monthly cycle, so none may
+    charge from the grid (why "cycle").
     """
     plan_on = runs is not None and runs.on
     in_cheap = plan_on and runs.cheap.holds(now) and runs.charge_useful()
@@ -144,8 +179,10 @@ def decide(runs, now, packs, *, charge_ok, sell_ok, trade_why, price_now,
     in_sell = plan_on and runs.sell is not None and runs.sell.holds(now)
 
     why = None
-    ch = chargers(packs, ceiling_pct, done_charge, probe=True) \
+    ch = chargers(packs, ceiling_pct, done_charge, targets, probe=True) \
         if in_cheap else []
+    if ch and draining:
+        ch, why = [], "cycle"
     charging = False
     if ch:
         need = 0.0 if charging_now else START_W

goodwe_controller/app/p1.py

@@ -318,6 +318,13 @@ class QuarterAverager:
         with `roll=True` credits it into the next block as `add()` will."""
         return self._last_t
 
+    @property
+    def held_since(self) -> datetime | None:
+        """SAFETY-90: when the held sample arrived (its `ingest_ts`), or None."""
+        if self._last_t is None:
+            return None
+        return datetime.fromtimestamp(self._last_t, timezone.utc)
+
     @property
     def offtake_avg_w(self) -> float:
         """Average offtake over the part of the open block seen so far."""

goodwe_controller/app/packmode.py

@@ -46,10 +46,13 @@ SELL_KEY = "pack_sell"              # OPT-11 P3: sell in the sell run
 # refused; the sell code in modetrade/priceruns stays, unreachable.
 SELLING_ENABLED = False
 
-# The modes that may charge from the grid in a cheap run. Leftover solar joins
-# when the solar forecast exists (P4); until then it takes solar only (owner
-# decision 2026-09-29, option A).
+# The modes that may charge from the grid in a cheap run with no day plan.
+# Leftover solar takes solar only then (owner decision 2026-09-29, option A).
 GRID_CHARGE_MODES = (CHEAP_HOURS,)
+# OPT-11 P4: with a fresh solar forecast, the day plan (dayplan.py) lets
+# Leftover solar charge from the grid, by the shortfall only. Cheap hours only
+# ignores the plan (fills to the ceiling); Solar first never grid-charges.
+PLAN_CHARGE_MODES = (LEFTOVER_SOLAR,)
 
 
 def enabled(opts) -> bool:

goodwe_controller/app/peakguard.py

@@ -183,6 +183,8 @@ guard passes its own tests while being switched off:
     record). Those seconds make the projection read LOW, which is the
     under-guarding direction. The threshold is `max_hold_s` itself - the point
     p1.py already stops trusting a held sample - not a new number.
+    SAFETY-90: once readings are back, main.py counts those seconds
+    (`fill_gaps()`), so this holds only while the gap lasts.
 
   * FROZEN. SAFETY-18's conjunction, evaluated through `freeze.looks_frozen()`
     rather than re-written here. A frozen meter is the worst case of all: the
@@ -397,7 +399,7 @@ function, so whichever way the owner answers, this file does not change and does
 not need re-testing. Nothing here indexes a phase.
 """
 
-from dataclasses import dataclass
+from dataclasses import dataclass, replace
 
 from . import messages
 from .arbiter import ACTUATOR_SITE, P_PEAK, Claim
@@ -490,11 +492,18 @@ class PeakDecision:
     # floor refused to size it. Mutually exclusive with `saturated` by
     # construction: this branch asks for nothing, so it cannot have run out of
     # inverter. `soc_floor_reason` says WHICH of the two ways it bound.
+    # SAFETY-87: at N>=2 it may ask the batteries above their reserve for
+    # `able_w`, all they have, when that is not enough (`place_on_able()`).
     floor_limited: bool = False
     soc: float | None = None
     soc_floor: float | None = None
     soc_floor_reason: str | None = None
     reason: str = ""
+    # SAFETY-87, N>=2 only: the batteries at or under their own reserve,
+    # which give nothing for the peak, and what the others can give (None
+    # when they are not asked). See `place_on_able()`.
+    held: tuple = ()
+    able_w: float | None = None
 
     def explain(self) -> str:
         """Idle: the status row's plain words (UX-08). Engaged: `reason`, the
@@ -592,6 +601,57 @@ def blindness(projection, max_hold_s, frozen: bool) -> str | None:
     return None
 
 
+# SAFETY-90. Seconds of uncounted time below which nothing is filled: float
+# noise between the averager's sums and the wall clock, never a real gap.
+GAP_TOL_S = 1e-3
+
+
+def gap_w(ceiling_w, *seen_w) -> float:
+    """SAFETY-90: the watts a meter gap is counted at. The highest of the
+    limit and `seen_w`, the import with the batteries at 0 W (grid + their
+    discharge) just before and just after the gap; None entries are skipped.
+    DECISIONS/SAFETY-90-peak-guard-after-a-gap.md."""
+    return max([float(ceiling_w)] + [float(w) for w in seen_w if w is not None])
+
+
+def fill_gaps(projection, *, tail_s, max_hold_s, unseen_s, gap_w, unseen_w,
+              held_ws=0.0):
+    """SAFETY-90: `projection` with the seconds the averager did not count
+    (a meter gap past `max_hold_s`) counted at `gap_w`, and those from before
+    this run's first reading (`unseen_s`) at `unseen_w`. `held_ws` is added
+    too: what the gap's first `max_hold_s`, credited at the reading before
+    it, lacks to reach `gap_w`. Returns
+    `(projection, gap seconds filled, unseen seconds filled)`.
+
+    `tail_s` is the age of the held reading: up to `max_hold_s` of it is left
+    as before (the averager credits it once the next reading lands). Past
+    that the gap is still open, nothing is filled and `blindness()` answers
+    as before. DECISIONS/SAFETY-90-peak-guard-after-a-gap.md."""
+    if projection.block_start is None or max_hold_s is None:
+        return projection, 0.0, 0.0
+    wall = float(projection.elapsed_s)
+    tail = min(max(0.0, float(tail_s)), wall)
+    if tail > float(max_hold_s):
+        return projection, 0.0, 0.0
+    covered = wall - uncovered_s(projection)
+    missing = wall - covered - tail
+    if missing <= GAP_TOL_S:
+        missing = 0.0
+        if held_ws <= 0.0:
+            return projection, 0.0, 0.0
+    unseen = min(missing, max(0.0, float(unseen_s)))
+    gap = missing - unseen
+    add_ws = gap * float(gap_w) + unseen * float(unseen_w) + float(held_ws)
+    done = covered + missing
+    return (replace(
+        projection,
+        projected_w=float(projection.projected_w) + add_ws / QUARTER_S,
+        elapsed_w=((float(projection.elapsed_w) * covered + add_ws) / done
+                   if done > 0.0 else float(projection.elapsed_w)),
+        covered_frac=(done / wall if wall > 0.0
+                      else float(projection.covered_frac))), gap, unseen)
+
+
 def discharge_permitted(soc, soc_floor) -> str | None:
     """SAFETY-24. May the guard size a forced discharge, or why may it not?
 
@@ -733,6 +793,43 @@ def binding_soc_floor(packs, soc_floor):
     return max(floors)
 
 
+def reserve_split(packs, soc_floor) -> tuple[list, tuple]:
+    """SAFETY-87: `(packs the guard may spend, names of those it may not)`,
+    each pack graded on its own floor by `pack_permissions()`."""
+    perms = pack_permissions(packs, soc_floor)
+    return ([p for p, (_n, why) in zip(packs, perms) if why is None],
+            tuple(n for n, why in perms if why is not None))
+
+
+def place_on_able(decision, held, *, able_w, soc, soc_floor) -> PeakDecision:
+    """SAFETY-87: `decision` with the batteries in `held` (at or under their
+    own reserve) giving nothing for the peak. `able_w`, `soc` and `soc_floor`
+    describe the others, as `decide()`'s arguments do for the roster. A
+    floor-limited decision is re-taken on them: they are asked for the need
+    up to `able_w`, and it stays floor-limited only if that is not enough.
+    `soc` and `soc_floor` keep the roster's verdict, as `decide()` echoed it.
+    DECISIONS/SAFETY-87-guard-uses-able-batteries.md."""
+    held = tuple(held)
+    if not decision.floor_limited or decision.wanted_w is None \
+            or discharge_permitted(soc, soc_floor) is not None:
+        return replace(decision, held=held)
+    wanted = float(decision.wanted_w)
+    floor = min(wanted, float(able_w))
+    head = (f"this 15-minute period heads for {decision.projected_w:.0f} W "
+            f"against a {decision.ceiling_w:.0f} W limit "
+            f"({decision.ceiling_from}), aiming at {decision.target_w:.0f} W. "
+            f"At the peak reserve, so giving nothing for the peak: "
+            f"{messages.names(held)}. The others are asked for {floor:+.0f} W")
+    if floor >= wanted:
+        return replace(decision, floor_limited=False, floor_w=floor,
+                       soc_floor_reason=None, held=held, able_w=float(able_w),
+                       reason=f"PEAK_GUARD: {head}")
+    return replace(decision, floor_w=floor, held=held, able_w=float(able_w),
+                   reason=(f"PEAK_GUARD_FLOOR_LIMITED: {head}, all they can "
+                           f"give, but {wanted:+.0f} W was needed, so this "
+                           f"period may go over the limit"))
+
+
 def decide(projection, *, batt_w, cap_w, margin_w, reading, achievable_w, soc,
            soc_floor, max_hold_s=None, frozen: bool = False) -> PeakDecision:
     """The whole guard. Pure: no clock, no I/O, no state carried between calls.
@@ -866,6 +963,40 @@ def decide(projection, *, batt_w, cap_w, margin_w, reading, achievable_w, soc,
                if saturated else "")))
 
 
+# SAFETY-81. A quarter must end this many W over the real limit before
+# "Load too high for battery" fires. Above the guard's own landing error at
+# margin 0 (up to +5.7 W, SAFETY-79 test check 5), which margin 0 accepts.
+ALARM_MISS_W = 10.0
+# ...and for this long without a break, so a load that peaks for a few seconds
+# (a hob or heater cycling) is not read as the rest of the quarter.
+ALARM_HOLD_S = 10.0
+
+
+def load_too_high(projection, *, batt_w, ceiling_w, achievable_w) -> bool:
+    """SAFETY-81. May "Load too high for battery" fire? Only if, with the
+    battery at full power from now on, the quarter still ends more than
+    `ALARM_MISS_W` over the real limit (`ceiling_w`, not the aim).
+
+    This is the miss itself, in W of the quarter average, so it does not have
+    `decide()`'s gain (900 / remaining): near a quarter's end that gain turns
+    a watt over the aim into thousands of W wanted.
+
+    The load is the held meter reading plus `batt_w`. The caller passes the
+    lower of this cycle's and the last cycle's battery reading, so a meter
+    sample taken before the battery's last increase is not counted twice
+    (DECISIONS/SAFETY-81-load-too-high.md). A real overload shows on the meter
+    before the battery moves, so that filter costs it no cycle.
+    """
+    remaining = QUARTER_S - float(projection.elapsed_s)
+    if batt_w is None or remaining <= 0.0:
+        return False
+    rest = float(projection.held_w) + float(batt_w) - float(achievable_w)
+    done_ws = (QUARTER_S * float(projection.projected_w)
+               - max(float(projection.held_w), 0.0) * remaining)
+    ends_w = (done_ws + max(rest, 0.0) * remaining) / QUARTER_S
+    return ends_w - float(ceiling_w) > ALARM_MISS_W
+
+
 def charge_headroom_w(decision) -> float | None:
     """SAFETY-45. The hardest this SITE may charge without putting the billed
     quarter over the ceiling, in W, positive - or None when nothing measured it.
@@ -1063,5 +1194,6 @@ def claim(decision: PeakDecision) -> Claim | None:
     return Claim.limit(SOURCE, P_PEAK, lo=float(decision.floor_w),
                        reason=("blind" if decision.blind
                                else "SoC floor" if decision.floor_limited
+                               and not decision.floor_w
                                else "quarter peak"),
                        actuator=ACTUATOR_SITE)

goodwe_controller/app/solarfc.py

@@ -0,0 +1,350 @@
+"""OPT-11 P4: the solar forecast, read from a Home Assistant sensor.
+
+Pure: HA state dicts and the time in, a `Forecast` (or None and why) out.
+main.py reads the entities; dayplan.py uses the answer. FCST-01 replaces
+this later with the add-on's own forecast (owner answer, 2026-09-27).
+
+Two options name the sensors: `pv_forecast_entity`, the solar energy still
+to come TODAY, and `pv_forecast_tomorrow_entity`, TOMORROW's (optional; it
+is only needed for a cheap run before midnight). Supported, by the entities
+they create (DOCS.md lists them):
+
+* Forecast.Solar (HA core): `sensor.energy_production_today_remaining` and
+  `sensor.energy_production_tomorrow`. The state only; no hourly split.
+* Solcast PV Forecast (HACS `solcast_solar`):
+  `sensor.solcast_pv_forecast_forecast_remaining_today` and
+  `..._forecast_tomorrow`, with `detailedForecast` (or `detailedHourly`):
+  `[{period_start, pv_estimate}]`, kW per period.
+* Open-Meteo Solar Forecast (HACS `open_meteo_solar_forecast`):
+  `sensor.energy_production_today_remaining` / `..._tomorrow`, with
+  `wh_period`: `{period start: Wh}`.
+
+Any other sensor whose state is energy in Wh, kWh or MWh works too, as a
+state only. The unit is read, never guessed (the rule `pv.watts()` has).
+Without an hourly split, the day's energy is spread over a fixed bell from
+06:00 to 20:00 local time (`BELL_FROM_H`, `BELL_TO_H`).
+
+A reading older than `FRESH_S`, or from before local midnight, is stale,
+and a stale or missing forecast is no forecast: the day plan is off and
+every mode acts as in P3 option A.
+
+OPT-17: each day may instead name a list (`pv_forecast_entities`,
+`pv_forecast_tomorrow_entities`), summed by `read_sum()`. One member that is
+not usable makes that day's sum unusable, never a partial sum.
+DECISIONS/OPT-17-several-forecast-entities.md.
+"""
+
+import math
+from dataclasses import dataclass
+from datetime import datetime, timedelta, timezone
+
+from .hass import BAD_STATES
+from .tariff import BILLING_TZ
+
+KWH_PER = {"Wh": 0.001, "kWh": 1.0, "MWh": 1000.0}
+
+# Stale after 3 h. The integrations above refresh at least hourly, so a
+# 2 h limit would flag a site whose hourly poll was missed once.
+FRESH_S = 3 * 3600.0
+
+# The bell a state-only forecast is spread over, in local hours.
+BELL_FROM_H, BELL_TO_H = 6.0, 20.0
+
+# Why there is no forecast (the page words are in ui_text `home_words`).
+NOT_SET, MISSING, UNIT, STALE, BAD = (
+    "not_set", "missing", "unit", "stale", "bad")
+
+# OPT-17: (single key, list key) per day. A set list replaces the single key;
+# the validator refuses both set for the same day.
+TODAY_KEYS = ("pv_forecast_entity", "pv_forecast_entities")
+TOMORROW_KEYS = ("pv_forecast_tomorrow_entity",
+                 "pv_forecast_tomorrow_entities")
+
+
+@dataclass(frozen=True)
+class Day:
+    """One day's forecast: `kwh` still to come (today) or in all (tomorrow),
+    and the hourly split if the sensor has one: `((start, end, kwh), ...)`."""
+    day0: datetime              # local midnight, as UTC
+    kwh: float
+    periods: tuple = ()
+
+
+@dataclass(frozen=True)
+class Forecast:
+    today: Day
+    tomorrow: Day | None
+    at: datetime                # when the sensor last reported
+
+    def between(self, t0: datetime, t1: datetime) -> float | None:
+        """kWh the sun should give between `t0` (now or later) and `t1`.
+        None when the span reaches the sunny hours of a day with no
+        forecast (tomorrow, when its sensor is not set)."""
+        if t1 <= t0:
+            return 0.0
+        last = self.tomorrow or self.today
+        if t1 > last.day0 + timedelta(days=1, hours=BELL_FROM_H):
+            return None
+        total = 0.0
+        for day in (self.today, self.tomorrow):
+            if day is None:
+                continue
+            a = max(t0, day.day0)
+            b = min(t1, day.day0 + timedelta(days=1))
+            if b > a:
+                total += _day_between(day, a, b, t0)
+        return total
+
+
+def _local_hour(t: datetime) -> float:
+    lt = t.astimezone(BILLING_TZ)
+    return lt.hour + lt.minute / 60.0 + lt.second / 3600.0
+
+
+def _bell(h: float) -> float:
+    """Cumulative share of a day's sun by local hour `h` (0..1)."""
+    if h <= BELL_FROM_H:
+        return 0.0
+    if h >= BELL_TO_H:
+        return 1.0
+    x = (h - BELL_FROM_H) / (BELL_TO_H - BELL_FROM_H)
+    return (1.0 - math.cos(math.pi * x)) / 2.0
+
+
+def _hours_since(day0, t):
+    return (t - day0).total_seconds() / 3600.0
+
+
+def _day_between(day: Day, a: datetime, b: datetime, now: datetime) -> float:
+    if day.periods:
+        out = 0.0
+        for s, e, kwh in day.periods:
+            lo, hi = max(a, s), min(b, e)
+            if hi > lo:
+                out += kwh * (hi - lo).total_seconds() / (e - s).total_seconds()
+        return out
+    # State only: `kwh` is what is left from `max(now, day0)` to the day's
+    # end, spread over the bell.
+    h_from = _hours_since(day.day0, max(now, day.day0))
+    left = 1.0 - _bell(h_from)
+    if left <= 1e-9:
+        return 0.0
+    share = (_bell(_hours_since(day.day0, b))
+             - _bell(_hours_since(day.day0, a))) / left
+    return day.kwh * max(0.0, share)
+
+
+def _parse_time(v):
+    try:
+        t = datetime.fromisoformat(str(v).replace("Z", "+00:00"))
+    except (TypeError, ValueError):
+        return None
+    return t if t.tzinfo else t.replace(tzinfo=timezone.utc)
+
+
+def _periods(attrs: dict, day0: datetime) -> tuple:
+    """The hourly split, if the sensor has one, for the day at `day0`."""
+    d1 = day0 + timedelta(days=1)
+    out = []
+    for key in ("detailedForecast", "detailedHourly"):
+        rows = attrs.get(key)
+        if isinstance(rows, list) and rows:
+            starts = []
+            for r in rows:
+                if not isinstance(r, dict):
+                    continue
+                t = _parse_time(r.get("period_start"))
+                try:
+                    kw = float(r.get("pv_estimate"))
+                except (TypeError, ValueError):
+                    continue
+                if t is not None and math.isfinite(kw) and kw >= 0:
+                    starts.append((t, kw))
+            starts.sort()
+            for i, (t, kw) in enumerate(starts):
+                step = (starts[i + 1][0] - t if i + 1 < len(starts)
+                        else timedelta(minutes=30 if key ==
+                                       "detailedForecast" else 60))
+                if step <= timedelta(0) or step > timedelta(hours=1):
+                    step = timedelta(minutes=30 if key == "detailedForecast"
+                                     else 60)
+                if day0 <= t < d1:
+                    out.append((t, t + step,
+                                kw * step.total_seconds() / 3600.0))
+            if out:
+                return tuple(out)
+    wh = attrs.get("wh_period")
+    if isinstance(wh, dict) and wh:
+        rows = []
+        for k, v in wh.items():
+            t = _parse_time(k)
+            try:
+                e = float(v)
+            except (TypeError, ValueError):
+                continue
+            if t is not None and math.isfinite(e) and e >= 0:
+                rows.append((t, e / 1000.0))
+        rows.sort()
+        for i, (t, kwh) in enumerate(rows):
+            nxt = rows[i + 1][0] if i + 1 < len(rows) else t + timedelta(
+                hours=1)
+            if nxt - t > timedelta(hours=1) or nxt <= t:
+                nxt = t + timedelta(hours=1)
+            if day0 <= t < d1:
+                out.append((t, nxt, kwh))
+    return tuple(out)
+
+
+def _day(state, day0, now, *, today):
+    """`(Day, None)` or `(None, why)` from one sensor's state dict."""
+    if state is None:
+        return None, MISSING
+    raw = str(state.get("state", "")).strip()
+    if raw.lower() in BAD_STATES:
+        return None, MISSING
+    try:
+        v = float(raw)
+    except ValueError:
+        return None, BAD
+    attrs = state.get("attributes") or {}
+    unit = str(attrs.get("unit_of_measurement") or "").strip()
+    if unit not in KWH_PER:
+        return None, UNIT
+    kwh = v * KWH_PER[unit]
+    if not math.isfinite(kwh) or kwh < 0:
+        return None, BAD
+    periods = _periods(attrs, day0)
+    if periods and today:
+        # The split is the whole day; keep what is still to come, scaled so
+        # it adds up to the state (the state is what the integration says
+        # is left).
+        left = sum(k * max(0.0, min(1.0, (e - max(s, now)).total_seconds()
+                                    / (e - s).total_seconds()))
+                   for s, e, k in periods)
+        if left > 1e-6:
+            f = kwh / left
+            periods = tuple((s, e, k * f) for s, e, k in periods)
+    return Day(day0, kwh, periods), None
+
+
+def _reported(state):
+    ts = [_parse_time(state.get(k)) for k in
+          ("last_reported", "last_updated", "last_changed")]
+    ts = [t for t in ts if t is not None]
+    return max(ts) if ts else None
+
+
+def entities(opts: dict, *, tomorrow=False) -> tuple:
+    """The forecast entities one day names, in configured order: the list
+    if it has any entry, else the single key, else (). A repeated id is
+    dropped, as `pv.entities()` does: it would count one forecast twice."""
+    one, many = TOMORROW_KEYS if tomorrow else TODAY_KEYS
+    listed = [e for e in (str(x or "").strip()
+                          for x in (opts.get(many) or [])) if e]
+    if listed:
+        return tuple(dict.fromkeys(listed))
+    e = str(opts.get(one) or "").strip()
+    return (e,) if e else ()
+
+
+def _bounds(now):
+    here = now.astimezone(BILLING_TZ)
+    d0 = datetime(here.year, here.month, here.day, tzinfo=BILLING_TZ)
+    nd = d0.date() + timedelta(days=1)
+    d1 = datetime(nd.year, nd.month, nd.day, tzinfo=BILLING_TZ)
+    return d0.astimezone(timezone.utc), d1.astimezone(timezone.utc)
+
+
+def _today(state, day0, now):
+    """`(Day, at, None)` or `(None, None, why)` for one today sensor."""
+    today, why = _day(state, day0, now, today=True)
+    if today is None:
+        return None, None, why
+    at = _reported(state)
+    # A reading from before local midnight is yesterday's "left today" (0
+    # after sunset) until the integration refreshes: stale, not a dark day.
+    if at is None or at < day0 or (now - at).total_seconds() > FRESH_S \
+            or (at - now).total_seconds() > 300:
+        return None, None, STALE
+    return today, at, None
+
+
+def _tomorrow(state, day0, day1, now):
+    """`(Day, None)` or `(None, why)` for one tomorrow sensor."""
+    t, why = _day(state, day1, now, today=False)
+    if t is None:
+        return None, why
+    t_at = _reported(state)
+    if t_at is None or t_at < day0 or (now - t_at).total_seconds() > FRESH_S:
+        return None, STALE
+    return t, None
+
+
+def read(today_state, tomorrow_state, now: datetime, *,
+         configured=True):
+    """`(Forecast, None)` or `(None, why)`. `tomorrow_state` may be None
+    (the option is not set, or the sensor is missing): the forecast then
+    covers today only."""
+    if not configured:
+        return None, NOT_SET
+    day0, day1 = _bounds(now)
+    today, at, why = _today(today_state, day0, now)
+    if today is None:
+        return None, why
+    tomorrow = None
+    if tomorrow_state is not None:
+        tomorrow, _w = _tomorrow(tomorrow_state, day0, day1, now)
+    return Forecast(today, tomorrow, at), None
+
+
+def _sum(days):
+    """One Day from several members' Days. The hourly split is kept only if
+    every member has one: the splits are then joined (`_day_between()`
+    adds overlapping periods). Else the total goes on the bell."""
+    if len(days) == 1:
+        return days[0]
+    periods = ()
+    if all(d.periods for d in days):
+        periods = tuple(sorted(p for d in days for p in d.periods))
+    return Day(days[0].day0, sum(d.kwh for d in days), periods)
+
+
+def read_sum(today, tomorrow, now: datetime):
+    """OPT-17: `(Forecast or None, why, gaps)` over lists of
+    `(entity, state)`, one per configured member, in configured order.
+
+    Each member is read exactly as `read()` reads one sensor, in its own
+    unit. A member that is missing, unavailable, stale, not in an energy
+    unit or bad makes that DAY unusable, as one such sensor does today: no
+    today means no forecast, no tomorrow means today only. A partial sum
+    would under-count the sun and mislead the day plan.
+
+    `gaps` is `((day, position, entity, why), ...)` for every unusable
+    member (`day` "today" or "tomorrow", `position` 1-based), so the page
+    and the log can name it. With one member per day the forecast is what
+    `read()` gives (test_opt17.py proves it)."""
+    if not today:
+        return None, NOT_SET, ()
+    day0, day1 = _bounds(now)
+    gaps, days, ats, why0 = [], [], [], None
+    for i, (ent, st) in enumerate(today, 1):
+        d, at, why = _today(st, day0, now)
+        if d is None:
+            gaps.append(("today", i, ent, why))
+            why0 = why0 or why
+        else:
+            days.append(d)
+            ats.append(at)
+    tdays = []
+    for i, (ent, st) in enumerate(tomorrow, 1):
+        t, why = _tomorrow(st, day0, day1, now)
+        if t is None:
+            gaps.append(("tomorrow", i, ent, why))
+        else:
+            tdays.append(t)
+    gaps = tuple(gaps)
+    if why0 is not None:
+        return None, why0, gaps
+    tday = _sum(tdays) if tomorrow and len(tdays) == len(tomorrow) else None
+    # The oldest member's report is when the sum was last fully known.
+    return Forecast(_sum(days), tday, min(ats)), None, gaps

goodwe_controller/app/static/app.js

@@ -100,7 +100,7 @@
   }
   function renderPill() {
     const st = S.state || null;
-    const dot = st ? ({ running: "", shadow: " warn", stopped: " warn", warning: " warn", alarm: " bad" }[st.kind] ?? " warn")
+    const dot = st ? ({ running: "", shadow: " warn", stopped: " warn", warning: " warn", alarm: " bad", waiting: " warn" }[st.kind] ?? " warn")
                    : (S.level === "ok" ? "" : S.level === "bad" ? " bad" : " warn");
     const words = st ? [st.pill, st.ran].filter(Boolean).join(". ") : S.setup_only === true ? t("setup_only.name") : S.banner;
     $("#pill").replaceChildren(h("span", { class: "dot" + dot, "aria-hidden": "true" }), h("span", {}, words));
@@ -399,10 +399,13 @@
     $("#batt-how").hidden = !modes;
     const docs = $("#batt-docs");
     if (S.control && S.control.docs_url) { docs.href = S.control.docs_url; docs.hidden = false; } else docs.hidden = true;
-    if (S.state && ["shadow", "stopped", "alarm"].includes(S.state.kind)) banner($("#batt-banner"), S.level, S.state.pill, S.state.sub, S.level === "bad" ? "alert" : null);
+    if (S.state && ["shadow", "stopped", "alarm", "waiting"].includes(S.state.kind)) banner($("#batt-banner"), S.level, S.state.pill, S.state.sub, S.level === "bad" ? "alert" : null);
     else $("#batt-banner").replaceChildren();
     keepFocus(() => {
       $("#bcards").replaceChildren(...S.batteries.map(batteryCard));
+      // OPT-11 P4: the solar forecast line under the cards.
+      const sl = $("#batt-solar"), line = modes && S.solar ? S.solar.line : "";
+      if (sl) { sl.textContent = line || ""; sl.hidden = !line; }
       if (simpleHost && simpleHost.isConnected) {
         simpleHost.replaceChildren(...(modes ? S.batteries.map(simpleRow)
           : [h("p", { class: "small muted", style: "margin:4px 0" }, t("batteries.modes_off.name") + ". " + t("batteries.description"))]));

goodwe_controller/app/static/index.html

@@ -101,6 +101,7 @@
     <a class="btn" href="#settings" data-t="batteries.settings"></a>
   </div>
   <div id="bcards"></div>
+  <p class="small muted" id="batt-solar" hidden></p>
   <details class="grp" id="batt-how" hidden>
     <summary><span class="grow"><strong data-t="batteries.how.name"></strong><span class="small muted gdesc" data-t="batteries.how.description"></span></span><span class="chev" aria-hidden="true">&#8250;</span></summary>
     <div class="body small">

goodwe_controller/app/static/settings.js

@@ -446,7 +446,17 @@
       e.textContent = ok ? e.dataset.kwNote.replace("{kw}", window.UX13.kw(mp.peak_w) + " kW") : "";
     });
   }
+  // OPT-11 P4: the solar forecast card shows the add-on's forecast line.
+  function fillSolar() {
+    const st = window.UX13.status();
+    const line = st && st.solar ? st.solar.line : "";
+    document.querySelectorAll("#simple [data-solar-note]").forEach((e) => {
+      e.textContent = line || "";
+      e.hidden = !line;
+    });
+  }
   document.addEventListener("ux13:status", fillNotes);
+  document.addEventListener("ux13:status", fillSolar);
   function simpleField(f) {
     const row = fieldRow(f, null, "simple");
     row.querySelector(".head").append(chip(f.applies));
@@ -458,6 +468,7 @@
       const help = row.querySelector(".help");
       if (help) help.textContent = n.description;
     }
+    if (f.note === "forecast") row.append(h("div", { class: "small muted", "data-solar-note": "", hidden: true }));
     return h("div", { class: "card" }, row);
   }
   function renderSimple() {

goodwe_controller/app/static_tariff.py

@@ -1232,6 +1232,16 @@ def static_plan(opts: dict, since: datetime, until: datetime, *,
         profile, "fallback" if provisional else "static")
 
 
+def static_gated(opts: dict, now: datetime) -> bool:
+    """MAINT-13: is a fixed tariff set up, so that a cheap window can hold a
+    charge back? False for no profile or one that cannot be used."""
+    try:
+        return bool(static_plan(opts, now, now + timedelta(days=MEAN_WINDOW_DAYS),
+                                now=now).has_prices)
+    except ProfileInvalid:
+        return False
+
+
 def static_status(opts: dict, now: datetime):
     """(cheap, words) for the status page and for main.py's cheap-window flag.
 

goodwe_controller/app/store.py

@@ -94,6 +94,7 @@ DEFAULTS = {
     "phase_started": None,
     "last_completed": None,
     "last_start_attempt": None,
+    "last_failed": None,
     "sign_tripped": False,
     "sign_reason": "",
     "circ_tripped": False,
@@ -171,7 +172,7 @@ MAINT_SCHEMA_KEY = "maint_schema_version"
 # silently stop being migrated - the same property `UNIT_STORE_KEYS` gives the
 # SAFETY-02 pair.
 MAINT_UNIT_KEYS = ("phase", "phase_started", "last_completed",
-                   "last_start_attempt")
+                   "last_start_attempt", "last_failed")
 
 
 def unit_key(unit: str, key: str) -> str:

goodwe_controller/app/tariff.py

@@ -835,6 +835,22 @@ class PeakTracker:
             held_w=averager.held_net_w)
 
 
+def next_quarter(p: Projection, max_hold_s: float) -> Projection:
+    """SAFETY-91: `p` past its block's end, before the next block's first
+    telegram: the next quarter, projected from the held reading (the averager
+    credits it there). `p` itself otherwise, or when that reading is too old
+    to be credited. DECISIONS/SAFETY-91-held-battery-last.md."""
+    if p.block_start is None or p.elapsed_s < QUARTER_S \
+            or p.elapsed_s * (1.0 - p.covered_frac) > float(max_hold_s):
+        return p
+    held = max(p.held_w, 0.0)
+    return Projection(projected_w=held, elapsed_w=held,
+                      elapsed_s=p.elapsed_s - QUARTER_S, covered_frac=1.0,
+                      complete=True,
+                      block_start=p.block_start + timedelta(seconds=QUARTER_S),
+                      held_w=p.held_w)
+
+
 @dataclass(frozen=True)
 class _ClosedBlock:
     """A block reconstructed from a checkpoint. Shaped like `p1.QuarterBlock` so

goodwe_controller/app/ui_text/en.json

@@ -119,7 +119,7 @@
     "description": "Every setting, grouped by task.",
     "view": {"name": "Settings view", "simple": "Simple", "installer": "Installer"},
     "simple": {"description": "The choices a home owner makes.",
-      "note": {"month_peak": {"description": "This month's peak so far: {kw}."}, "shadow": {"description": "Use Always on while you test a new installation."}},
+      "note": {"month_peak": {"description": "This month's peak so far: {kw}."}, "shadow": {"description": "Use Always on while you test a new installation."}, "forecast": {"description": "With a forecast, a battery buys only what the sun will not give."}},
       "batteries": {"name": "Batteries"},
       "more": {"description": "Looking for the meter, inverters or prices?"},
       "installer": "Open the installer view"},
@@ -267,6 +267,7 @@
       "shadow": "Shadow mode",
       "stopped": "Stopped",
       "alarm": "Needs you now",
+      "waiting": "Waiting for Home Assistant",
       "warning": "Running, with a warning"
     },
     "banner_sub": {
@@ -274,6 +275,7 @@
       "shadow": "The plans below say what the add-on would do.",
       "stopped": "Start control below when you are ready.",
       "alarm": "See Needs attention below for what to do.",
+      "waiting": "Control resumes by itself when Home Assistant answers.",
       "warning": "See Needs attention below."
     },
     "tile": {
@@ -327,6 +329,7 @@
       "leftover_alone": "No Solar first battery is on, so it gets solar first.",
       "covers_house": "It gives power to cover the house.",
       "other_refuses": "{name} refuses to give power, so this battery takes over.",
+      "other_cycle": "{name} is emptying for its monthly cycle. This one does not charge.",
       "grid_charge": "Prices are low, so it charges from the grid.",
       "rests_charge": "Another battery charges from the grid, so it rests.",
       "selling": "Prices are high, so it sells to the grid.",
@@ -334,8 +337,12 @@
       "saves": "Saves its power for {at}.",
       "saves_later": "Saves its power for higher prices.",
       "no_prices": "No prices, so it follows the house.",
-      "no_spread": "Prices differ too little, so it follows the house."
+      "no_spread": "Prices differ too little, so it follows the house.",
+      "sun_fills": "Enough sun is forecast, so it does not charge from the grid.",
+      "tops_up": "Too little sun is forecast, so it charges some from the grid.",
+      "no_forecast": "No solar forecast, so it charges from solar only."
     },
+    "solar": {"line": "Solar still to come today: {kwh}, we count on {count}. Updated {at}.", "no_forecast": "No solar forecast now, so Leftover solar charges from solar only.", "learning": "The add-on is learning your house's use. The plan starts after one full day."},
     "today": {
       "not_planned": "Not planned yet.",
       "no_runs": "No cheap or expensive hours left today.",
@@ -405,6 +412,7 @@
     "step_in": "The batteries step in above {kw}.",
     "step_in_would": "The batteries would step in above {kw}.",
     "period": "This 15-minute period is heading for {kw}.",
+    "period_unmeasured": "Part of this 15-minute period was not measured.",
     "prices": {
       "now": "Price now {eur} per kWh, all in.",
       "today": "Today: lowest {lo} at {lo_at}, highest {hi} at {hi_at}.",
@@ -425,6 +433,7 @@
       "stopped": "Control is stopped. Every inverter is at 0 W."
     },
     "attn": {
+      "home_assistant": "Home Assistant is not answering",
       "controller": "Control is not running",
       "meter": "Meter reading",
       "meter_frozen": "Meter reading may be stuck",
@@ -443,6 +452,7 @@
       "delivery": "An inverter is not delivering",
       "estop": "Emergency stop",
       "pv": "Solar reading",
+      "solar_forecast": "Solar forecast",
       "none": "Inverter connection"
     },
     "months": ["January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"]

goodwe_controller/app/ui_text/nl.json

@@ -114,7 +114,7 @@
     "description": "Elke instelling, per taak.",
     "view": {"name": "Weergave van de instellingen", "simple": "Eenvoudig", "installer": "Installateur"},
     "simple": {"description": "De keuzes die een eigenaar maakt.",
-      "note": {"month_peak": {"description": "De piek van deze maand tot nu: {kw}."}, "shadow": {"description": "Kies Altijd aan terwijl u een nieuwe installatie test."}},
+      "note": {"month_peak": {"description": "De piek van deze maand tot nu: {kw}."}, "shadow": {"description": "Kies Altijd aan terwijl u een nieuwe installatie test."}, "forecast": {"description": "Met een prognose koopt een batterij alleen wat de zon niet geeft."}},
       "batteries": {"name": "Batterijen"},
       "more": {"description": "Zoekt u de meter, de omvormers of de prijzen?"},
       "installer": "De installateursweergave openen"},
@@ -230,8 +230,8 @@
     "zero_held": "Op 0 W gehouden",
     "zero_going": "Gaat naar 0 W",
     "verdict": {"held": "Op 0 W gehouden", "stopped": "Gestopt", "cycle": "Vandaag maandelijkse cyclus", "trade": "Handelt op prijs", "house": "Volgt het huis"},
-    "pill": {"running": "Actief", "shadow": "Schaduwmodus", "stopped": "Gestopt", "alarm": "Heeft u nu nodig", "warning": "Actief, met een waarschuwing"},
-    "banner_sub": {"running": "De batterijen volgen het plan hieronder.", "shadow": "De plannen hieronder tonen wat de add-on zou doen.", "stopped": "Start de regeling hieronder als u klaar bent.", "alarm": "Zie Vraagt aandacht hieronder voor wat u moet doen.", "warning": "Zie Vraagt aandacht hieronder."},
+    "pill": {"running": "Actief", "shadow": "Schaduwmodus", "stopped": "Gestopt", "alarm": "Heeft u nu nodig", "waiting": "Wacht op Home Assistant", "warning": "Actief, met een waarschuwing"},
+    "banner_sub": {"running": "De batterijen volgen het plan hieronder.", "shadow": "De plannen hieronder tonen wat de add-on zou doen.", "stopped": "Start de regeling hieronder als u klaar bent.", "alarm": "Zie Vraagt aandacht hieronder voor wat u moet doen.", "waiting": "De regeling gaat vanzelf verder zodra Home Assistant antwoordt.", "warning": "Zie Vraagt aandacht hieronder."},
     "tile": {"not_set_up": "Niet ingesteld", "no_reading": "Geen meting", "producing": "Produceert", "not_producing": "Produceert niet", "needs_solar": "Zonnemeting nodig", "not_adding_up": "Metingen kloppen niet", "using": "Verbruikt", "taking": "Neemt af van het net", "feeding": "Injecteert", "balanced": "In evenwicht", "giving": "Levert stroom", "charging": "Laadt", "resting": "Rust"},
     "now": {
       "no_reading": "Geen meting van deze batterij.",
@@ -269,6 +269,7 @@
       "leftover_alone": "Geen batterij met Eerst zonne-energie staat aan, dus zij krijgt eerst zonne-energie.",
       "covers_house": "Ze levert stroom om het huis te dekken.",
       "other_refuses": "{name} weigert te leveren, dus deze batterij neemt het over.",
+      "other_cycle": "{name} loopt leeg voor haar maandelijkse cyclus. Deze laadt niet.",
       "grid_charge": "De prijs is laag, dus ze laadt van het net.",
       "rests_charge": "Een andere batterij laadt van het net, dus deze rust.",
       "selling": "De prijs is hoog, dus ze verkoopt aan het net.",
@@ -276,8 +277,12 @@
       "saves": "Spaart haar stroom voor {at}.",
       "saves_later": "Spaart haar stroom voor hogere prijzen.",
       "no_prices": "Geen prijzen, dus ze volgt het huis.",
-      "no_spread": "De prijzen verschillen te weinig, dus ze volgt het huis."
+      "no_spread": "De prijzen verschillen te weinig, dus ze volgt het huis.",
+      "sun_fills": "Er is genoeg zon voorspeld, dus ze laadt niet van het net.",
+      "tops_up": "Te weinig zon voorspeld, dus ze laadt wat van het net.",
+      "no_forecast": "Geen zonneprognose, dus ze laadt alleen met zonne-energie."
     },
+    "solar": {"line": "Nog verwachte zon vandaag: {kwh}, we rekenen op {count}. Bijgewerkt om {at}.", "no_forecast": "Nu geen zonneprognose, dus Overschot zonne-energie laadt alleen met zon.", "learning": "De add-on leert eerst het verbruik van uw huis. Het plan start na één volle dag."},
     "today": {
       "not_planned": "Nog niet gepland.",
       "no_runs": "Vandaag geen goedkope of dure uren meer.",
@@ -342,12 +347,14 @@
     "step_in": "De batterijen springen bij boven {kw}.",
     "step_in_would": "De batterijen zouden bijspringen boven {kw}.",
     "period": "Dit kwartier gaat richting {kw}.",
+    "period_unmeasured": "Een deel van dit kwartier is niet gemeten.",
     "prices": {"now": "Prijs nu {eur} per kWh, alles inbegrepen.", "today": "Vandaag: laagste {lo} om {lo_at}, hoogste {hi} om {hi_at}.", "none": "Geen prijzen voor vandaag."},
     "tomorrow": {"known": "De prijzen van morgen zijn binnen.", "unknown": "De prijzen van morgen komen meestal na 13:00."},
     "region": {"preset": "Heffingen en btw: {region}, cijfers van {year}.", "own": "Heffingen en btw: uw eigen bedrag."},
     "peak_not_covered": "Geen piekgrens: deze meter meet geen kwartieren.",
     "control": {"shadow": "Schaduwmodus: elke omvormer blijft op 0 W.", "running": "De regeling is actief.", "stopped": "De regeling is gestopt. Elke omvormer staat op 0 W."},
     "attn": {
+      "home_assistant": "Home Assistant antwoordt niet",
       "controller": "Regeling is niet actief",
       "meter": "Meting van de meter",
       "meter_frozen": "Meter staat mogelijk vast",
@@ -366,6 +373,7 @@
       "delivery": "Een omvormer levert niet",
       "estop": "Noodstop",
       "pv": "Meting van de zonnepanelen",
+      "solar_forecast": "Zonneprognose",
       "none": "Verbinding met de omvormer"
     },
     "months": ["januari", "februari", "maart", "april", "mei", "juni", "juli", "augustus", "september", "oktober", "november", "december"]

goodwe_controller/app/uilayout.py

@@ -129,7 +129,18 @@ GROUPS = (
                              wizard=3),)),
         # OPT-11: the switch that turns battery modes on. Each battery's mode
         # and on/off switch are runtime state on the Batteries screen.
-        Part("modes", (Field("battery_modes_enabled", TOGGLE),)),
+        Part("modes", (
+            Field("battery_modes_enabled", TOGGLE),
+            # OPT-11 P4: the solar forecast; today's also on Settings, Simple.
+            Field("pv_forecast_entity", ENTITY, kind="energy", simple=True,
+                  note="forecast"),
+            Field("pv_forecast_tomorrow_entity", ENTITY, kind="energy"),
+            # OPT-17: several forecast sensors per day, summed.
+            Field("pv_forecast_entities", ENTITY_LIST, kind="energy"),
+            Field("pv_forecast_tomorrow_entities", ENTITY_LIST,
+                  kind="energy"),
+            Field("solar_trust_pct", SLIDER, "%", step=5),
+        )),
     )),
     Group("tariff", (
         Part("", (

goodwe_controller/app/validate.py

@@ -246,6 +246,10 @@ NOT READY banner already names the problem, (b) does not apply.
  12. `peak_margin_w` outside 0-500 W, not whole, or not below `peak_cap_w`.
      SAFETY-79; the Supervisor checks the range too, but not for sim/inject.py.
 
+ 13. OPT-11 P4: `solar_trust_pct` outside 30-100 or not whole, or a solar
+     forecast entity that is not a `sensor.` id. A trust of 0 or 500 % would
+     make the day plan buy everything or nothing, which no one means.
+
 WHAT IS DELIBERATELY *NOT* REFUSED, because it is untidy rather than unsafe:
 
   - `integrator_max_w` above `max_w`. DOCS.md is right that the only thing the
@@ -324,9 +328,10 @@ WHAT IS DELIBERATELY *NOT* REFUSED, because it is untidy rather than unsafe:
 """
 
 import logging
+import re
 from typing import NamedTuple
 
-from . import messages, pv
+from . import dayplan, messages, pv, solarfc
 from .arbitrage import enabled as arbitrage_on
 from .control import SLEW_RAIL_FRAC, LOOP_TICK_S, PLANT_SETTLE_S
 from .custom_formula import (
@@ -1199,6 +1204,7 @@ def validate_startup_config(opts: dict, dev_min=None, dev_max=None,
 
     # --- 12. SAFETY-79: the margin the peak guard keeps under the limit -----
     problems += _margin_problems(opts)
+    problems += _forecast_problems(opts)
 
     # --- warnings: real, but not worth refusing over -------------------------
     integ = opts.get("integrator_max_w")
@@ -1751,6 +1757,8 @@ def _entities_read(opts: dict) -> list[tuple[str, str, str]]:
     add("pv_entities" if solar else "pv_entity", list(pv.entities(opts)))
     for key in ("peak_forecast_entity", "price_now_entity", "price_avg_entity"):
         add(key, opts.get(key))
+    for key in FORECAST_KEYS:
+        add(key, opts.get(key))
     return out
 
 
@@ -1790,6 +1798,20 @@ def _entity_notes(notes, opts: dict, entities: dict, bad=()) -> None:
             _advise(notes, "warn", (key,),
                     f"{entity} reads in {unit}, but {S(key, where)} is "
                     "taken as watts, so pick a sensor in W.")
+        if key in FORECAST_KEYS and unit not in solarfc.KWH_PER:
+            _advise(notes, "warn", (key,),
+                    f"{entity} does not read in kWh, so pick a solar "
+                    "forecast sensor in kWh.")
+    today = solarfc.entities(opts)
+    tomorrow = solarfc.entities(opts, tomorrow=True)
+    if (today or tomorrow) and \
+            opts.get("battery_modes_enabled") is not True:
+        _advise(notes, "info", ("pv_forecast_entity",),
+                "The solar forecast is used only with battery modes on.")
+    if tomorrow and not today:
+        _advise(notes, "warn", ("pv_forecast_tomorrow_entity",),
+                "Tomorrow's forecast is used only with today's, so set "
+                f"{S('pv_forecast_entity')} too.")
 
 
 # --------------------------------------------------------------------------- #
@@ -2045,6 +2067,50 @@ def _margin_problems(opts: dict) -> list[str]:
     return []
 
 
+TRUST_RANGE_PCT = (30, 100)
+# A Home Assistant sensor id; it goes into the /api/states/<id> path.
+_SENSOR_ID = re.compile(r"sensor\.[a-z0-9_]+")
+FORECAST_KEYS = solarfc.TODAY_KEYS + solarfc.TOMORROW_KEYS
+
+
+def _forecast_problems(opts: dict) -> list[str]:
+    """Rule 13 (OPT-11 P4): the trust is a whole percentage in range, and
+    each forecast entity set is a sensor. OPT-17: a day names its forecast
+    in the single key or in the list, not both."""
+    out = []
+    raw = opts.get("solar_trust_pct")
+    trust = _number(opts, "solar_trust_pct", dayplan.DEFAULT_TRUST_PCT)
+    lo, hi = TRUST_RANGE_PCT
+    if trust is None or trust != int(trust) or not lo <= trust <= hi:
+        out.append(f"{S('solar_trust_pct')} must be a whole number from {lo} "
+                   f"to {hi} %. It is {messages.shown(raw)}.")
+    for one, many in (solarfc.TODAY_KEYS, solarfc.TOMORROW_KEYS):
+        e = opts.get(one)
+        if e is not None and e != "" and (
+                not isinstance(e, str) or not _SENSOR_ID.fullmatch(e)):
+            out.append(f"{S(one)} must be a sensor, like "
+                       f"sensor.energy_production_today_remaining. It is "
+                       f"{messages.shown(e)}.")
+        raw = opts.get(many)
+        if raw is None:
+            raw = []
+        if not isinstance(raw, list):
+            out.append(f"{S(many)} must be a list of sensors. It is "
+                       f"{messages.shown(raw)}.")
+            continue
+        listed = [x for x in raw if x is not None
+                  and not (isinstance(x, str) and not x.strip())]
+        for x in listed:
+            if not isinstance(x, str) or not _SENSOR_ID.fullmatch(x):
+                out.append(f"{S(many)} must list only sensors, like "
+                           f"sensor.energy_production_today_remaining. "
+                           f"It has {messages.shown(x)}.")
+        if e and listed:
+            out.append(f"Set {S(one)} or {S(many)}, not both. Keep the "
+                       f"list and clear the single one.")
+    return out
+
+
 def _number(opts: dict, key, default):
     raw = opts.get(key, default)
     if raw is None or raw == "":