# THE ENTITY IDS THE INSTALL HAS — a stand-in for the owner's real export.
#
# ⚠️ THIS FILE AND `announced-reference.txt` ANSWER DIFFERENT QUESTIONS AND ARE
# NOT INTERCHANGEABLE:
#
#   announced-reference.txt   what the BUILD announces. Loaded on EVERY run.
#                             Three columns, because HA keys on `unique_id` and
#                             on the device identifier as well as on the
#                             composed entity_id.
#   this file (--live-entities)
#                             what the INSTALL has. One id per line. Orphans
#                             are graded against it: an id the install has and
#                             the AFTER shape does not announce is an orphan
#                             whatever the build's own history says.
#
# ⚠️ OMITTING `--live-entities` IS A REFUSAL (exit 2), NOT A QUIETER RUN. It
# used to be the other way round - an unreadable file refused, a missing flag
# passed with exit 0 and said nothing about the half it had not checked - and
# the owner runs this ONCE, at commissioning, under time pressure.
# `--no-live-entities` is the deliberate opt-out and it prints a standing
# banner in the report header and again on the exit line.
#
# PROVENANCE: these eight are what `release/1.0` announces at
# `meter_source: firmware`, roster of one, recorded 2026-09-08. They stand in
# for the export so the checks run in CI. ⚠️ THE REAL INSTALL CARRIES ROUGHLY 49
# `goodwe*` ENTITIES (card ARCH-02, read 2026-09-06); the other ~41 belong to
# the ESPHome firmware, to template sensors and to helpers, and this add-on
# announces none of them. The tool separates the ids it owns from the ids it
# does not rather than claiming orphans it cannot cause - which is the half of
# this file the eight-line stand-in cannot exercise, and the reason DOCS.md's
# owner step asks for the real export.
sensor.goodwe_battery_power
sensor.goodwe_battery_soc
sensor.goodwe_circulating_power
sensor.goodwe_controller_status
sensor.goodwe_grid_power
sensor.goodwe_maintenance_phase
sensor.goodwe_p1_sample_age
sensor.goodwe_setpoint
